summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2011-03-29 02:14:45 +0400
committerLinus Torvalds <torvalds@linux-foundation.org>2011-03-29 02:14:45 +0400
commitbc5bbc4541c4098603edcf9b0b960a71741e79de (patch)
tree45a07588b6c610493366746f28ea848ca02bae12 /arch
parent32836e082b25f17e7b09f11335b34b039c7568d2 (diff)
parentfe67dfc874da094bbbfbb73e74924d414b96105b (diff)
downloadlinux-bc5bbc4541c4098603edcf9b0b960a71741e79de.tar.xz
Merge branch 'for-torvalds' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson
* 'for-torvalds' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: mach-ux500: configure board for the TPS61052 regulator v2 mach-ux500: provide ab8500 init vector mach-ux500: board support for AB8500 GPIO driver gpio: driver for 42 AB8500 GPIO pins
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/mach-ux500/Kconfig1
-rw-r--r--arch/arm/mach-ux500/board-mop500-regulators.c201
-rw-r--r--arch/arm/mach-ux500/board-mop500-regulators.h1
-rw-r--r--arch/arm/mach-ux500/board-mop500.c49
-rw-r--r--arch/arm/mach-ux500/board-mop500.h4
-rw-r--r--arch/arm/mach-ux500/include/mach/irqs-board-mop500.h15
6 files changed, 268 insertions, 3 deletions
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 203b986280f5..58626013aa32 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -23,6 +23,7 @@ menu "Ux500 target platform"
config MACH_U8500
bool "U8500 Development platform"
depends on UX500_SOC_DB8500
+ select TPS6105X
help
Include support for the mop500 development platform.
diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
index 875c91b2f8a4..9ed0f90cfe23 100644
--- a/arch/arm/mach-ux500/board-mop500-regulators.c
+++ b/arch/arm/mach-ux500/board-mop500-regulators.c
@@ -13,6 +13,30 @@
#include <linux/regulator/ab8500.h>
#include "board-mop500-regulators.h"
+/*
+ * TPS61052 regulator
+ */
+static struct regulator_consumer_supply tps61052_vaudio_consumers[] = {
+ /*
+ * Boost converter supply to raise voltage on audio speaker, this
+ * is actually connected to three pins, VInVhfL (left amplifier)
+ * VInVhfR (right amplifier) and VIntDClassInt - all three must
+ * be connected to the same voltage.
+ */
+ REGULATOR_SUPPLY("vintdclassint", "ab8500-codec.0"),
+};
+
+struct regulator_init_data tps61052_regulator = {
+ .constraints = {
+ .name = "vaudio-hf",
+ .min_uV = 4500000,
+ .max_uV = 4500000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(tps61052_vaudio_consumers),
+ .consumer_supplies = tps61052_vaudio_consumers,
+};
+
static struct regulator_consumer_supply ab8500_vaux1_consumers[] = {
/* External displays, connector on board 2v5 power supply */
REGULATOR_SUPPLY("vaux12v5", "mcde.0"),
@@ -62,6 +86,182 @@ static struct regulator_consumer_supply ab8500_vana_consumers[] = {
REGULATOR_SUPPLY("vsmps2", "mcde.0"),
};
+/* ab8500 regulator register initialization */
+struct ab8500_regulator_reg_init
+ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = {
+ /*
+ * VanaRequestCtrl = HP/LP depending on VxRequest
+ * VextSupply1RequestCtrl = HP/LP depending on VxRequest
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2, 0x00),
+ /*
+ * VextSupply2RequestCtrl = HP/LP depending on VxRequest
+ * VextSupply3RequestCtrl = HP/LP depending on VxRequest
+ * Vaux1RequestCtrl = HP/LP depending on VxRequest
+ * Vaux2RequestCtrl = HP/LP depending on VxRequest
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL3, 0x00),
+ /*
+ * Vaux3RequestCtrl = HP/LP depending on VxRequest
+ * SwHPReq = Control through SWValid disabled
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4, 0x00),
+ /*
+ * VanaSysClkReq1HPValid = disabled
+ * Vaux1SysClkReq1HPValid = disabled
+ * Vaux2SysClkReq1HPValid = disabled
+ * Vaux3SysClkReq1HPValid = disabled
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0x00),
+ /*
+ * VextSupply1SysClkReq1HPValid = disabled
+ * VextSupply2SysClkReq1HPValid = disabled
+ * VextSupply3SysClkReq1HPValid = SysClkReq1 controlled
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID2, 0x40),
+ /*
+ * VanaHwHPReq1Valid = disabled
+ * Vaux1HwHPreq1Valid = disabled
+ * Vaux2HwHPReq1Valid = disabled
+ * Vaux3HwHPReqValid = disabled
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID1, 0x00),
+ /*
+ * VextSupply1HwHPReq1Valid = disabled
+ * VextSupply2HwHPReq1Valid = disabled
+ * VextSupply3HwHPReq1Valid = disabled
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID2, 0x00),
+ /*
+ * VanaHwHPReq2Valid = disabled
+ * Vaux1HwHPReq2Valid = disabled
+ * Vaux2HwHPReq2Valid = disabled
+ * Vaux3HwHPReq2Valid = disabled
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID1, 0x00),
+ /*
+ * VextSupply1HwHPReq2Valid = disabled
+ * VextSupply2HwHPReq2Valid = disabled
+ * VextSupply3HwHPReq2Valid = HWReq2 controlled
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID2, 0x04),
+ /*
+ * VanaSwHPReqValid = disabled
+ * Vaux1SwHPReqValid = disabled
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID1, 0x00),
+ /*
+ * Vaux2SwHPReqValid = disabled
+ * Vaux3SwHPReqValid = disabled
+ * VextSupply1SwHPReqValid = disabled
+ * VextSupply2SwHPReqValid = disabled
+ * VextSupply3SwHPReqValid = disabled
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID2, 0x00),
+ /*
+ * SysClkReq2Valid1 = SysClkReq2 controlled
+ * SysClkReq3Valid1 = disabled
+ * SysClkReq4Valid1 = SysClkReq4 controlled
+ * SysClkReq5Valid1 = disabled
+ * SysClkReq6Valid1 = SysClkReq6 controlled
+ * SysClkReq7Valid1 = disabled
+ * SysClkReq8Valid1 = disabled
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID1, 0x2a),
+ /*
+ * SysClkReq2Valid2 = disabled
+ * SysClkReq3Valid2 = disabled
+ * SysClkReq4Valid2 = disabled
+ * SysClkReq5Valid2 = disabled
+ * SysClkReq6Valid2 = SysClkReq6 controlled
+ * SysClkReq7Valid2 = disabled
+ * SysClkReq8Valid2 = disabled
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID2, 0x20),
+ /*
+ * VTVoutEna = disabled
+ * Vintcore12Ena = disabled
+ * Vintcore12Sel = 1.25 V
+ * Vintcore12LP = inactive (HP)
+ * VTVoutLP = inactive (HP)
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUMISC1, 0x10),
+ /*
+ * VaudioEna = disabled
+ * VdmicEna = disabled
+ * Vamic1Ena = disabled
+ * Vamic2Ena = disabled
+ */
+ INIT_REGULATOR_REGISTER(AB8500_VAUDIOSUPPLY, 0x00),
+ /*
+ * Vamic1_dzout = high-Z when Vamic1 is disabled
+ * Vamic2_dzout = high-Z when Vamic2 is disabled
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC, 0x00),
+ /*
+ * VPll = Hw controlled
+ * VanaRegu = force off
+ */
+ INIT_REGULATOR_REGISTER(AB8500_VPLLVANAREGU, 0x02),
+ /*
+ * VrefDDREna = disabled
+ * VrefDDRSleepMode = inactive (no pulldown)
+ */
+ INIT_REGULATOR_REGISTER(AB8500_VREFDDR, 0x00),
+ /*
+ * VextSupply1Regu = HW control
+ * VextSupply2Regu = HW control
+ * VextSupply3Regu = HW control
+ * ExtSupply2Bypass = ExtSupply12LPn ball is 0 when Ena is 0
+ * ExtSupply3Bypass = ExtSupply3LPn ball is 0 when Ena is 0
+ */
+ INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU, 0x2a),
+ /*
+ * Vaux1Regu = force HP
+ * Vaux2Regu = force off
+ */
+ INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU, 0x01),
+ /*
+ * Vaux3regu = force off
+ */
+ INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU, 0x00),
+ /*
+ * Vsmps1 = 1.15V
+ */
+ INIT_REGULATOR_REGISTER(AB8500_VSMPS1SEL1, 0x24),
+ /*
+ * Vaux1Sel = 2.5 V
+ */
+ INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL, 0x08),
+ /*
+ * Vaux2Sel = 2.9 V
+ */
+ INIT_REGULATOR_REGISTER(AB8500_VAUX2SEL, 0x0d),
+ /*
+ * Vaux3Sel = 2.91 V
+ */
+ INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3SEL, 0x07),
+ /*
+ * VextSupply12LP = disabled (no LP)
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUCTRL2SPARE, 0x00),
+ /*
+ * Vaux1Disch = short discharge time
+ * Vaux2Disch = short discharge time
+ * Vaux3Disch = short discharge time
+ * Vintcore12Disch = short discharge time
+ * VTVoutDisch = short discharge time
+ * VaudioDisch = short discharge time
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH, 0x00),
+ /*
+ * VanaDisch = short discharge time
+ * VdmicPullDownEna = pulldown disabled when Vdmic is disabled
+ * VdmicDisch = short discharge time
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH2, 0x00),
+};
+
/* AB8500 regulators */
struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
/* supplies to the display/camera */
@@ -72,6 +272,7 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
.max_uV = 2900000,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS,
+ .boot_on = 1, /* must be on for display */
},
.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers),
.consumer_supplies = ab8500_vaux1_consumers,
diff --git a/arch/arm/mach-ux500/board-mop500-regulators.h b/arch/arm/mach-ux500/board-mop500-regulators.h
index f979b892e4fa..94992158d962 100644
--- a/arch/arm/mach-ux500/board-mop500-regulators.h
+++ b/arch/arm/mach-ux500/board-mop500-regulators.h
@@ -17,5 +17,6 @@
extern struct ab8500_regulator_reg_init
ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS];
extern struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS];
+extern struct regulator_init_data tps61052_regulator;
#endif
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index d0076453d7ff..dc8746d7826e 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -22,6 +22,8 @@
#include <linux/mfd/ab8500.h>
#include <linux/regulator/ab8500.h>
#include <linux/mfd/tc3589x.h>
+#include <linux/mfd/tps6105x.h>
+#include <linux/mfd/ab8500/gpio.h>
#include <linux/leds-lp5521.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
@@ -42,10 +44,35 @@
#include "board-mop500.h"
#include "board-mop500-regulators.h"
+static struct ab8500_gpio_platform_data ab8500_gpio_pdata = {
+ .gpio_base = MOP500_AB8500_GPIO(0),
+ .irq_base = MOP500_AB8500_VIR_GPIO_IRQ_BASE,
+ /* config_reg is the initial configuration of ab8500 pins.
+ * The pins can be configured as GPIO or alt functions based
+ * on value present in GpioSel1 to GpioSel6 and AlternatFunction
+ * register. This is the array of 7 configuration settings.
+ * One has to compile time decide these settings. Below is the
+ * explaination of these setting
+ * GpioSel1 = 0x00 => Pins GPIO1 to GPIO8 are not used as GPIO
+ * GpioSel2 = 0x1E => Pins GPIO10 to GPIO13 are configured as GPIO
+ * GpioSel3 = 0x80 => Pin GPIO24 is configured as GPIO
+ * GpioSel4 = 0x01 => Pin GPIo25 is configured as GPIO
+ * GpioSel5 = 0x7A => Pins GPIO34, GPIO36 to GPIO39 are conf as GPIO
+ * GpioSel6 = 0x00 => Pins GPIO41 & GPIo42 are not configured as GPIO
+ * AlternaFunction = 0x00 => If Pins GPIO10 to 13 are not configured
+ * as GPIO then this register selectes the alternate fucntions
+ */
+ .config_reg = {0x00, 0x1E, 0x80, 0x01,
+ 0x7A, 0x00, 0x00},
+};
+
static struct ab8500_platform_data ab8500_platdata = {
.irq_base = MOP500_AB8500_IRQ_BASE,
+ .regulator_reg_init = ab8500_regulator_reg_init,
+ .num_regulator_reg_init = ARRAY_SIZE(ab8500_regulator_reg_init),
.regulator = ab8500_regulators,
.num_regulator = ARRAY_SIZE(ab8500_regulators),
+ .gpio = &ab8500_gpio_pdata,
};
static struct resource ab8500_resources[] = {
@@ -67,6 +94,15 @@ struct platform_device ab8500_device = {
};
/*
+ * TPS61052
+ */
+
+static struct tps6105x_platform_data mop500_tps61052_data = {
+ .mode = TPS6105X_MODE_VOLTAGE,
+ .regulator_data = &tps61052_regulator,
+};
+
+/*
* TC35892
*/
@@ -136,7 +172,7 @@ static struct lp5521_platform_data __initdata lp5521_sec_data = {
.clock_mode = LP5521_CLOCK_EXT,
};
-static struct i2c_board_info mop500_i2c0_devices[] = {
+static struct i2c_board_info __initdata mop500_i2c0_devices[] = {
{
I2C_BOARD_INFO("tc3589x", 0x42),
.irq = NOMADIK_GPIO_TO_IRQ(217),
@@ -144,6 +180,14 @@ static struct i2c_board_info mop500_i2c0_devices[] = {
},
};
+/* I2C0 devices only available prior to HREFv60 */
+static struct i2c_board_info __initdata mop500_i2c0_old_devices[] = {
+ {
+ I2C_BOARD_INFO("tps61052", 0x33),
+ .platform_data = &mop500_tps61052_data,
+ },
+};
+
static struct i2c_board_info __initdata mop500_i2c2_devices[] = {
{
/* lp5521 LED driver, 1st device */
@@ -406,6 +450,9 @@ static void __init mop500_init_machine(void)
i2c_register_board_info(0, mop500_i2c0_devices,
ARRAY_SIZE(mop500_i2c0_devices));
+ if (!machine_is_hrefv60())
+ i2c_register_board_info(0, mop500_i2c0_old_devices,
+ ARRAY_SIZE(mop500_i2c0_old_devices));
i2c_register_board_info(2, mop500_i2c2_devices,
ARRAY_SIZE(mop500_i2c2_devices));
}
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index 56722f4be71b..03a31cc9b084 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -27,6 +27,10 @@
#define GPIO_BU21013_CS MOP500_EGPIO(13)
#define GPIO_SDMMC_EN MOP500_EGPIO(17)
#define GPIO_SDMMC_1V8_3V_SEL MOP500_EGPIO(18)
+#define MOP500_EGPIO_END MOP500_EGPIO(24)
+
+/* GPIOs on the AB8500 mixed-signals circuit */
+#define MOP500_AB8500_GPIO(x) (MOP500_EGPIO_END + (x))
struct i2c_board_info;
diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
index 7cdeb2af0ebb..97ef55f84934 100644
--- a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
+++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
@@ -35,9 +35,20 @@
#define MOP500_STMPE1601_IRQBASE MOP500_EGPIO_IRQ_END
#define MOP500_STMPE1601_IRQ(x) (MOP500_STMPE1601_IRQBASE + (x))
-#define MOP500_NR_IRQS MOP500_STMPE1601_IRQ(STMPE_NR_INTERNAL_IRQS)
+#define MOP500_STMPE1601_IRQ_END \
+ MOP500_STMPE1601_IRQ(STMPE_NR_INTERNAL_IRQS)
-#define MOP500_IRQ_END MOP500_NR_IRQS
+/* AB8500 virtual gpio IRQ */
+#define AB8500_VIR_GPIO_NR_IRQS 16
+
+#define MOP500_AB8500_VIR_GPIO_IRQ_BASE \
+ MOP500_STMPE1601_IRQ_END
+#define MOP500_AB8500_VIR_GPIO_IRQ_END \
+ (MOP500_AB8500_VIR_GPIO_IRQ_BASE + AB8500_VIR_GPIO_NR_IRQS)
+
+#define MOP500_NR_IRQS MOP500_AB8500_VIR_GPIO_IRQ_END
+
+#define MOP500_IRQ_END MOP500_NR_IRQS
#if MOP500_IRQ_END > IRQ_BOARD_END
#undef IRQ_BOARD_END