[ARM] 5257/2: [AT91] Use SZ_ definitions and MTDPART_OFS_NXTBLK instead of hex-values

In the various AT91 board files, replace hard-coded size values (eg,
0x800000) with the SZ_ size definitions (eg, SZ_8M) from sizes.h
Also replace MTD partition offsets with MTDPART_OFS_NXTBLK.

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

17 files changed, 78 insertions, 78 deletions

diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index 196199552eb6..201b89392dcc 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -214,7 +214,7 @@ static struct physmap_flash_data cap9adk_nor_data = {
 };
 
 #define NOR_BASE	AT91_CHIPSELECT_0
-#define NOR_SIZE	0x800000
+#define NOR_SIZE	SZ_8M
 
 static struct resource nor_flash_resources[] = {
 	{
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index cb7c9a8fa487..4bdf69d552eb 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -28,7 +28,6 @@
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -37,6 +36,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 
@@ -114,7 +114,7 @@ static struct spi_board_info csb337_spi_devices[] = {
 };
 
 #define CSB_FLASH_BASE	AT91_CHIPSELECT_0
-#define CSB_FLASH_SIZE	0x800000
+#define CSB_FLASH_SIZE	SZ_8M
 
 static struct mtd_partition csb_flash_partitions[] = {
 	{
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index 8db8bd8babd9..cfa3f04b2205 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -25,7 +25,6 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -34,6 +33,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 
@@ -72,7 +72,7 @@ static struct at91_udc_data __initdata csb637_udc_data = {
 };
 
 #define CSB_FLASH_BASE	AT91_CHIPSELECT_0
-#define CSB_FLASH_SIZE	0x1000000
+#define CSB_FLASH_SIZE	SZ_16M
 
 static struct mtd_partition csb_flash_partitions[] = {
 	{
diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c
index 43e1aa7ecef7..0fd0f5bc77ea 100644
--- a/arch/arm/mach-at91/board-dk.c
+++ b/arch/arm/mach-at91/board-dk.c
@@ -29,7 +29,6 @@
 #include <linux/spi/spi.h>
 #include <linux/mtd/physmap.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -38,6 +37,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91rm9200_mc.h>
@@ -157,7 +157,7 @@ static struct atmel_nand_data __initdata dk_nand_data = {
 };
 
 #define DK_FLASH_BASE	AT91_CHIPSELECT_0
-#define DK_FLASH_SIZE	0x200000
+#define DK_FLASH_SIZE	SZ_2M
 
 static struct physmap_flash_data dk_flash_data = {
 	.width		= 2,
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index bfeee8a2af28..1d69908617f0 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -86,7 +86,7 @@ static struct mtd_partition __initdata my_flash0_partitions[] =
 	{	/* 0x8400 */
 		.name	= "Darrell-loader",
 		.offset	= 0,
-		.size	= 12* 1056,
+		.size	= 12 * 1056,
 	},
 	{
 		.name	= "U-boot",
diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-ek.c
index 60626e7a3490..4cdfaac8e590 100644
--- a/arch/arm/mach-at91/board-ek.c
+++ b/arch/arm/mach-at91/board-ek.c
@@ -29,7 +29,6 @@
 #include <linux/spi/spi.h>
 #include <linux/mtd/physmap.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -38,6 +37,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91rm9200_mc.h>
@@ -116,7 +116,7 @@ static struct i2c_board_info __initdata ek_i2c_devices[] = {
 };
 
 #define EK_FLASH_BASE	AT91_CHIPSELECT_0
-#define EK_FLASH_SIZE	0x200000
+#define EK_FLASH_SIZE	SZ_2M
 
 static struct physmap_flash_data ek_flash_data = {
 	.width		= 2,
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index dbc912d633c7..859727e7ea30 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -105,7 +105,7 @@ static struct at91_mmc_data __initdata picotux200_mmc_data = {
 // };
 
 #define PICOTUX200_FLASH_BASE	AT91_CHIPSELECT_0
-#define PICOTUX200_FLASH_SIZE	0x400000
+#define PICOTUX200_FLASH_SIZE	SZ_4M
 
 static struct physmap_flash_data picotux200_flash_data = {
 	.width	= 2,
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index 4c28413426c2..cfb4571a2e27 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -30,7 +30,6 @@
 #include <linux/input.h>
 #include <linux/clk.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -39,6 +38,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91_shdwc.h>
@@ -119,18 +119,18 @@ static struct at91_eth_data __initdata ek_macb_data = {
 static struct mtd_partition __initdata ek_nand_partition[] = {
 	{
 		.name	= "Uboot & Kernel",
-		.offset	= 0x00000000,
-		.size	= 16 * 1024 * 1024,
+		.offset	= 0,
+		.size	= SZ_16M,
 	},
 	{
 		.name	= "Root FS",
-		.offset	= 0x01000000,
-		.size	= 120 * 1024 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 120 * SZ_1M,
 	},
 	{
 		.name	= "FS",
-		.offset	= 0x08800000,
-		.size	= 120 * 1024 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 120 * SZ_1M,
 	},
 };
 
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index e4910cb26c16..99bb4cc23a09 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -126,11 +126,11 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 	{
 		.name	= "Bootloader Area",
 		.offset	= 0,
-		.size	= 10 * 1024 * 1024,
+		.size	= 10 * SZ_1M,
 	},
 	{
 		.name	= "User Area",
-		.offset	= 10 * 1024 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= MTDPART_SIZ_FULL,
 	},
 };
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index 0a53c038b518..e22433d5dfb6 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -29,7 +29,6 @@
 #include <linux/clk.h>
 #include <linux/i2c/at24.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -38,6 +37,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 
@@ -164,11 +164,11 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 	{
 		.name	= "Partition 1",
 		.offset	= 0,
-		.size	= 256 * 1024,
+		.size	= SZ_256K,
 	},
 	{
 		.name	= "Partition 2",
-		.offset	= 256 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= MTDPART_SIZ_FULL,
 	},
 };
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 1a9963b811c7..03d3382cfef6 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -35,7 +35,6 @@
 
 #include <video/atmel_lcdc.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -44,6 +43,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91sam9_smc.h>
@@ -168,11 +168,11 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 	{
 		.name	= "Partition 1",
 		.offset	= 0,
-		.size	= 256 * 1024,
+		.size	= SZ_256K,
 	},
 	{
 		.name	= "Partition 2",
-		.offset	= 256 * 1024 ,
+		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= MTDPART_SIZ_FULL,
 	},
 };
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index c51f2eb3874b..ad71f4a71451 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -33,7 +33,6 @@
 
 #include <video/atmel_lcdc.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -42,6 +41,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91sam9_smc.h>
@@ -173,11 +173,11 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 	{
 		.name	= "Partition 1",
 		.offset	= 0,
-		.size	= 64 * 1024 * 1024,
+		.size	= SZ_64M,
 	},
 	{
 		.name	= "Partition 2",
-		.offset	= 64 * 1024 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= MTDPART_SIZ_FULL,
 	},
 };
@@ -227,7 +227,7 @@ static struct i2c_board_info __initdata ek_i2c_devices[] = {
 #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
 static struct fb_videomode at91_tft_vga_modes[] = {
 	{
-	        .name           = "TX09D50VM1CCA @ 60",
+		.name		= "TX09D50VM1CCA @ 60",
 		.refresh	= 60,
 		.xres		= 240,		.yres		= 320,
 		.pixclock	= KHZ2PICOS(4965),
@@ -243,7 +243,7 @@ static struct fb_videomode at91_tft_vga_modes[] = {
 
 static struct fb_monspecs at91fb_default_monspecs = {
 	.manufacturer	= "HIT",
-	.monitor        = "TX09D70VM1CCA",
+	.monitor	= "TX09D70VM1CCA",
 
 	.modedb		= at91_tft_vga_modes,
 	.modedb_len	= ARRAY_SIZE(at91_tft_vga_modes),
@@ -254,7 +254,7 @@ static struct fb_monspecs at91fb_default_monspecs = {
 };
 
 #define AT91SAM9263_DEFAULT_LCDCON2 	(ATMEL_LCDC_MEMOR_LITTLE \
-					| ATMEL_LCDC_DISTYPE_TFT    \
+					| ATMEL_LCDC_DISTYPE_TFT \
 					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
 
 static void at91_lcdc_power_control(int on)
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index d4eba5c0ce02..b588ead14d68 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -122,16 +122,16 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 	{
 		.name   = "Bootstrap",
 		.offset = 0,
-		.size   = 4 * 1024 * 1024,
+		.size   = 4 * SZ_1M,
 	},
 	{
 		.name	= "Partition 1",
-		.offset	= 4 * 1024 * 1024,
-		.size	= 60 * 1024 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 60 * SZ_1M,
 	},
 	{
 		.name	= "Partition 2",
-		.offset	= 64 * 1024 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= MTDPART_SIZ_FULL,
 	},
 };
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index c6dce49c388c..3d3f61572cff 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -18,7 +18,6 @@
 
 #include <video/atmel_lcdc.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -27,6 +26,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91sam9_smc.h>
@@ -81,11 +81,11 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 	{
 		.name	= "Partition 1",
 		.offset	= 0,
-		.size	= 256 * 1024,
+		.size	= SZ_256K,
 	},
 	{
 		.name	= "Partition 2",
-		.offset	= 256 * 1024 ,
+		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= MTDPART_SIZ_FULL,
 	},
 };
diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c
index f9d0b65da40b..7c350357333a 100644
--- a/arch/arm/mach-at91/board-usb-a9260.c
+++ b/arch/arm/mach-at91/board-usb-a9260.c
@@ -30,7 +30,6 @@
 #include <linux/input.h>
 #include <linux/clk.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -39,6 +38,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91_shdwc.h>
@@ -93,18 +93,18 @@ static struct at91_eth_data __initdata ek_macb_data = {
 static struct mtd_partition __initdata ek_nand_partition[] = {
 	{
 		.name	= "Uboot & Kernel",
-		.offset	= 0x00000000,
-		.size	= 16 * 1024 * 1024,
+		.offset	= 0,
+		.size	= SZ_16M,
 	},
 	{
 		.name	= "Root FS",
-		.offset	= 0x01000000,
-		.size	= 120 * 1024 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 120 * SZ_1M,
 	},
 	{
 		.name	= "FS",
-		.offset	= 0x08800000,
-		.size	= 120 * 1024 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 120 * SZ_1M,
 	}
 };
 
diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c
index 673e5c27214d..391b566c4571 100644
--- a/arch/arm/mach-at91/board-usb-a9263.c
+++ b/arch/arm/mach-at91/board-usb-a9263.c
@@ -29,7 +29,6 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -38,6 +37,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91_shdwc.h>
@@ -106,18 +106,18 @@ static struct at91_eth_data __initdata ek_macb_data = {
 static struct mtd_partition __initdata ek_nand_partition[] = {
 	{
 		.name	= "Linux Kernel",
-		.offset	= 0x00000000,
-		.size	= 16 * 1024 * 1024,
+		.offset	= 0,
+		.size	= SZ_16M,
 	},
 	{
 		.name	= "Root FS",
-		.offset	= 0x01000000,
-		.size	= 120 * 1024 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 120 * SZ_1M,
 	},
 	{
 		.name	= "FS",
-		.offset	= 0x08800000,
-		.size	= 120 * 1024 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 120 * SZ_1M,
 	}
 };
 
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 36b380aad006..e22bf051f835 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -33,7 +33,6 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -42,6 +41,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91rm9200_mc.h>
@@ -150,27 +150,27 @@ static struct mtd_partition __initdata yl9200_nand_partition[] = {
 	{
 		.name	= "AT91 NAND partition 1, boot",
 		.offset	= 0,
-		.size	= 1 * SZ_256K
+		.size	= SZ_256K
 	},
 	{
 		.name	= "AT91 NAND partition 2, kernel",
-		.offset	= 1 * SZ_256K,
-		.size	= 2 * SZ_1M - 1 * SZ_256K
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= (2 * SZ_1M) - SZ_256K
 	},
 	{
 		.name	= "AT91 NAND partition 3, filesystem",
-		.offset	= 2 * SZ_1M,
+		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= 14 * SZ_1M
 	},
 	{
 		.name	= "AT91 NAND partition 4, storage",
-		.offset	= 16 * SZ_1M,
-		.size	= 16 * SZ_1M
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= SZ_16M
 	},
 	{
 		.name	= "AT91 NAND partition 5, ext-fs",
-		.offset	= 32 * SZ_1M,
-		.size	= 32 * SZ_1M
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= SZ_32M
 	}
 };
 
@@ -193,24 +193,24 @@ static struct atmel_nand_data __initdata yl9200_nand_data = {
  * NOR Flash
  */
 #define YL9200_FLASH_BASE	AT91_CHIPSELECT_0
-#define YL9200_FLASH_SIZE	0x1000000
+#define YL9200_FLASH_SIZE	SZ_16M
 
 static struct mtd_partition yl9200_flash_partitions[] = {
 	{
 		.name		= "Bootloader",
-		.size		= 0x00040000,
 		.offset		= 0,
+		.size		= SZ_256K,
 		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
 	},
 	{
 		.name		= "Kernel",
-		.size		= 0x001C0000,
-		.offset		= 0x00040000,
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= (2 * SZ_1M) - SZ_256K
 	},
 	{
 		.name		= "Filesystem",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= 0x00200000
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= MTDPART_SIZ_FULL
 	}
 };
 
@@ -390,10 +390,6 @@ static struct spi_board_info yl9200_spi_devices[] = {
 #if defined(CONFIG_FB_S1D135XX) || defined(CONFIG_FB_S1D13XXX_MODULE)
 #include <video/s1d13xxxfb.h>
 
-#define AT91_FB_REG_BASE	0x80000000L
-#define AT91_FB_REG_SIZE	0x200
-#define AT91_FB_VMEM_BASE	0x80200000L
-#define AT91_FB_VMEM_SIZE	0x200000L
 
 static void __init yl9200_init_video(void)
 {
@@ -516,29 +512,33 @@ static struct s1d13xxxfb_regval yl9200_s1dfb_initregs[] =
 	{S1DREG_COM_DISP_MODE,		0x01},	/* Display Mode Register, LCD only*/
 };
 
-static u64 s1dfb_dmamask = DMA_BIT_MASK(32);
-
 static struct s1d13xxxfb_pdata yl9200_s1dfb_pdata = {
 	.initregs		= yl9200_s1dfb_initregs,
 	.initregssize		= ARRAY_SIZE(yl9200_s1dfb_initregs),
 	.platform_init_video	= yl9200_init_video,
 };
 
+#define YL9200_FB_REG_BASE	AT91_CHIPSELECT_7
+#define YL9200_FB_VMEM_BASE	YL9200_FB_REG_BASE + SZ_2M
+#define YL9200_FB_VMEM_SIZE	SZ_2M
+
 static struct resource yl9200_s1dfb_resource[] = {
 	[0] = {	/* video mem */
 		.name	= "s1d13xxxfb memory",
-		.start	= AT91_FB_VMEM_BASE,
-		.end	= AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1,
+		.start	= YL9200_FB_VMEM_BASE,
+		.end	= YL9200_FB_VMEM_BASE + YL9200_FB_VMEM_SIZE -1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {	/* video registers */
 		.name	= "s1d13xxxfb registers",
-		.start	= AT91_FB_REG_BASE,
-		.end	= AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1,
+		.start	= YL9200_FB_REG_BASE,
+		.end	= YL9200_FB_REG_BASE + SZ_512 -1,
 		.flags	= IORESOURCE_MEM,
 	},
 };
 
+static u64 s1dfb_dmamask = DMA_BIT_MASK(32);
+
 static struct platform_device yl9200_s1dfb_device = {
 	.name		= "s1d13806fb",
 	.id		= -1,