Merge tag 'gpio-v3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO changes from Linus Walleij:
 "Here is the bulk of GPIO changes for the v3.13 development cycle.

  I've got ACKs for the things that affect other subsystems (or it's my
  own subsystem, like pinctrl).  Most of that pertain to an attempt from
  my side to consolidate and get rid of custom GPIO implementations in
  the ARM tree.  I will continue doing this.

  The main change this time is the new GPIO descriptor API, background
  for this can be found in Corbet's summary from this january in LWN:

    http://lwn.net/Articles/533632/

  Summary:

   - Merged the GPIO descriptor API from Alexandre Courbot.  This is a
     first step toward trying to get rid of the global GPIO numberspace
     for the future.

   - Add an API so that driver can flag that a certain GPIO line is
     being used by a irqchip backend for generating IRQs, so that we can
     enforce checks, like not allowing users to switch that line to an
     output at runtime, since this makes no sense.  Implemented
     corresponding calls in a few select drivers.

   - ACPI GPIO cleanups, refactorings and switch to using the
     descriptor-based interface.

   - Support for the TPS80036 Palmas GPIO variant.

   - A new driver for the Broadcom Kona GPIO SoC IP block.

   - Device tree support for the PCF857x driver.

   - A set of ARM GPIO refactorings with the goal of getting rid of a
     bunch of custom GPIO implementations from the arch/arm/* tree:

     * Move the IOP GPIO driver to the GPIO subsystem and fix all users
       to use the gpiolib API for accessing GPIOs.  Delete the old
       custom GPIO implementation.

     * Delete the unused custom PXA GPIO implemention.

     * Convert all users of the IXP4 custom GPIO implementation to use
       gpiolib and delete the custom implementation.

     * Delete the custom Gemini GPIO implementation, also completely
       unused.

   - Various cleanups and renamings"

* tag 'gpio-v3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (85 commits)
  gpio: gpio-mxs: Remove unneeded dt checks
  gpio: pl061: don't depend on CONFIG_ARM
  gpio: bcm-kona: add missing .owner to struct gpio_chip
  gpiolib: provide a declaration of seq_file in gpio/driver.h
  gpiolib: include gpio/consumer.h in of_gpio.h for desc_to_gpio()
  gpio: provide stubs for devres gpio functions
  gpiolib: devres: add missing headers
  gpiolib: make GPIO_DEVRES depend on GPIOLIB
  gpiolib: devres: fix devm_gpiod_get_index()
  gpiolib / ACPI: document the GPIO descriptor based interface
  gpiolib / ACPI: allow passing GPIOF_ACTIVE_LOW for GpioInt resources
  gpiolib / ACPI: add ACPI support for gpiod_get_index()
  gpiolib / ACPI: convert to gpiod interfaces
  gpiolib: add gpiod_get() and gpiod_put() functions
  gpiolib: port of_ functions to use gpiod
  gpiolib: export descriptor-based GPIO interface
  Fixup "MAINTAINERS: GPIO-INTEL-MID: add maintainer"
  gpio: bcm281xx: Don't print addresses of GPIO area in probe()
  gpio: tegra: use new gpio_lock_as_irq() API
  gpio: rcar: Include linux/of.h header
  ...

28 files changed, 197 insertions, 404 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index aa8300333bc5..acb80708accd 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -389,7 +389,6 @@ config ARCH_GEMINI
 	select CLKSRC_MMIO
 	select CPU_FA526
 	select GENERIC_CLOCKEVENTS
-	select NEED_MACH_GPIO_H
 	help
 	  Support for the Cortina Systems Gemini family SoCs
 
@@ -458,7 +457,7 @@ config ARCH_IOP32X
 	depends on MMU
 	select ARCH_REQUIRE_GPIOLIB
 	select CPU_XSCALE
-	select NEED_MACH_GPIO_H
+	select GPIO_IOP
 	select NEED_RET_TO_USER
 	select PCI
 	select PLAT_IOP
@@ -471,7 +470,7 @@ config ARCH_IOP33X
 	depends on MMU
 	select ARCH_REQUIRE_GPIOLIB
 	select CPU_XSCALE
-	select NEED_MACH_GPIO_H
+	select GPIO_IOP
 	select NEED_RET_TO_USER
 	select PCI
 	select PLAT_IOP
@@ -560,7 +559,6 @@ config ARCH_MMP
 	select GPIO_PXA
 	select IRQ_DOMAIN
 	select MULTI_IRQ_HANDLER
-	select NEED_MACH_GPIO_H
 	select PINCTRL
 	select PLAT_PXA
 	select SPARSE_IRQ
@@ -623,7 +621,6 @@ config ARCH_PXA
 	select GPIO_PXA
 	select HAVE_IDE
 	select MULTI_IRQ_HANDLER
-	select NEED_MACH_GPIO_H
 	select PLAT_PXA
 	select SPARSE_IRQ
 	help
diff --git a/arch/arm/include/asm/hardware/iop3xx-gpio.h b/arch/arm/include/asm/hardware/iop3xx-gpio.h
deleted file mode 100644
index 9eda7dc92ad8..000000000000
--- a/arch/arm/include/asm/hardware/iop3xx-gpio.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * arch/arm/include/asm/hardware/iop3xx-gpio.h
- *
- * IOP3xx GPIO wrappers
- *
- * Copyright (c) 2008 Arnaud Patard <arnaud.patard@rtp-net.org>
- * Based on IXP4XX gpio.h file
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARM_HARDWARE_IOP3XX_GPIO_H
-#define __ASM_ARM_HARDWARE_IOP3XX_GPIO_H
-
-#include <mach/hardware.h>
-#include <asm-generic/gpio.h>
-
-#define __ARM_GPIOLIB_COMPLEX
-
-#define IOP3XX_N_GPIOS	8
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	if (gpio > IOP3XX_N_GPIOS)
-		return __gpio_get_value(gpio);
-
-	return gpio_line_get(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	if (gpio > IOP3XX_N_GPIOS) {
-		__gpio_set_value(gpio, value);
-		return;
-	}
-	gpio_line_set(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
-	if (gpio < IOP3XX_N_GPIOS)
-		return 0;
-	else
-		return __gpio_cansleep(gpio);
-}
-
-/*
- * The GPIOs are not generating any interrupt
- * Note : manuals are not clear about this
- */
-static inline int gpio_to_irq(int gpio)
-{
-	return -EINVAL;
-}
-
-static inline int irq_to_gpio(int gpio)
-{
-	return -EINVAL;
-}
-
-#endif
-
diff --git a/arch/arm/include/asm/hardware/iop3xx.h b/arch/arm/include/asm/hardware/iop3xx.h
index 423744bf18eb..2594a95ff19a 100644
--- a/arch/arm/include/asm/hardware/iop3xx.h
+++ b/arch/arm/include/asm/hardware/iop3xx.h
@@ -18,16 +18,9 @@
 /*
  * IOP3XX GPIO handling
  */
-#define GPIO_IN			0
-#define GPIO_OUT		1
-#define GPIO_LOW		0
-#define GPIO_HIGH		1
 #define IOP3XX_GPIO_LINE(x)	(x)
 
 #ifndef __ASSEMBLY__
-extern void gpio_line_config(int line, int direction);
-extern int  gpio_line_get(int line);
-extern void gpio_line_set(int line, int value);
 extern int init_atu;
 extern int iop3xx_get_init_atu(void);
 #endif
@@ -168,11 +161,6 @@ extern int iop3xx_get_init_atu(void);
 /* PERCR0 DOESN'T EXIST - index from 1! */
 #define IOP3XX_PERCR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0710)
 
-/* General Purpose I/O  */
-#define IOP3XX_GPOE		(volatile u32 *)IOP3XX_GPIO_REG(0x0000)
-#define IOP3XX_GPID		(volatile u32 *)IOP3XX_GPIO_REG(0x0004)
-#define IOP3XX_GPOD		(volatile u32 *)IOP3XX_GPIO_REG(0x0008)
-
 /* Timers  */
 #define IOP3XX_TU_TMR0		(volatile u32 *)IOP3XX_TIMER_REG(0x0000)
 #define IOP3XX_TU_TMR1		(volatile u32 *)IOP3XX_TIMER_REG(0x0004)
diff --git a/arch/arm/mach-gemini/gpio.c b/arch/arm/mach-gemini/gpio.c
index 70bfa571b24b..f8cb5710d6ee 100644
--- a/arch/arm/mach-gemini/gpio.c
+++ b/arch/arm/mach-gemini/gpio.c
@@ -21,9 +21,9 @@
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
-#include <mach/gpio.h>
 
 #define GPIO_BASE(x)		IO_ADDRESS(GEMINI_GPIO_BASE(x))
+#define irq_to_gpio(x)		((x) - GPIO_IRQ_BASE)
 
 /* GPIO registers definition */
 #define GPIO_DATA_OUT		0x0
diff --git a/arch/arm/mach-gemini/include/mach/gpio.h b/arch/arm/mach-gemini/include/mach/gpio.h
deleted file mode 100644
index 40a0527bada7..000000000000
--- a/arch/arm/mach-gemini/include/mach/gpio.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Gemini gpiolib specific defines
- *
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __MACH_GPIO_H__
-#define __MACH_GPIO_H__
-
-#include <mach/irqs.h>
-
-#define gpio_to_irq(x)	((x) + GPIO_IRQ_BASE)
-#define irq_to_gpio(x)	((x) - GPIO_IRQ_BASE)
-
-#endif /* __MACH_GPIO_H__ */
diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
index 31fbb6c61b25..177cd073a83b 100644
--- a/arch/arm/mach-iop32x/em7210.c
+++ b/arch/arm/mach-iop32x/em7210.c
@@ -32,6 +32,7 @@
 #include <asm/mach/time.h>
 #include <asm/mach-types.h>
 #include <mach/time.h>
+#include "gpio-iop32x.h"
 
 static void __init em7210_timer_init(void)
 {
@@ -183,6 +184,7 @@ void em7210_power_off(void)
 
 static void __init em7210_init_machine(void)
 {
+	register_iop32x_gpio();
 	platform_device_register(&em7210_serial_device);
 	platform_device_register(&iop3xx_i2c0_device);
 	platform_device_register(&iop3xx_i2c1_device);
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index ac304705fe68..547b2342d61a 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -34,6 +34,7 @@
 #include <asm/mach-types.h>
 #include <asm/page.h>
 #include <mach/time.h>
+#include "gpio-iop32x.h"
 
 /*
  * GLAN Tank timer tick configuration.
@@ -187,6 +188,7 @@ static void glantank_power_off(void)
 
 static void __init glantank_init_machine(void)
 {
+	register_iop32x_gpio();
 	platform_device_register(&iop3xx_i2c0_device);
 	platform_device_register(&iop3xx_i2c1_device);
 	platform_device_register(&glantank_flash_device);
diff --git a/arch/arm/mach-iop32x/gpio-iop32x.h b/arch/arm/mach-iop32x/gpio-iop32x.h
new file mode 100644
index 000000000000..3c7309c02029
--- /dev/null
+++ b/arch/arm/mach-iop32x/gpio-iop32x.h
@@ -0,0 +1,10 @@
+static struct resource iop32x_gpio_res[] = {
+	DEFINE_RES_MEM((IOP3XX_PERIPHERAL_PHYS_BASE + 0x07c4), 0x10),
+};
+
+static inline void register_iop32x_gpio(void)
+{
+	platform_device_register_simple("gpio-iop", 0,
+					iop32x_gpio_res,
+					ARRAY_SIZE(iop32x_gpio_res));
+}
diff --git a/arch/arm/mach-iop32x/include/mach/gpio.h b/arch/arm/mach-iop32x/include/mach/gpio.h
deleted file mode 100644
index 708f4ec9db1d..000000000000
--- a/arch/arm/mach-iop32x/include/mach/gpio.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_ARCH_IOP32X_GPIO_H
-#define __ASM_ARCH_IOP32X_GPIO_H
-
-#include <asm/hardware/iop3xx-gpio.h>
-
-#endif
diff --git a/arch/arm/mach-iop32x/include/mach/iop32x.h b/arch/arm/mach-iop32x/include/mach/iop32x.h
index 941f363aca56..56ec864ec313 100644
--- a/arch/arm/mach-iop32x/include/mach/iop32x.h
+++ b/arch/arm/mach-iop32x/include/mach/iop32x.h
@@ -19,7 +19,6 @@
  * Peripherals that are shared between the iop32x and iop33x but
  * located at different addresses.
  */
-#define IOP3XX_GPIO_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x07c4 + (reg))
 #define IOP3XX_TIMER_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x07e0 + (reg))
 
 #include <asm/hardware/iop3xx.h>
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index f2cd2966212d..0e1392b20d18 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -37,6 +37,7 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <mach/time.h>
+#include "gpio-iop32x.h"
 
 /*
  * Until March of 2007 iq31244 platforms and ep80219 platforms shared the
@@ -283,6 +284,7 @@ void ep80219_power_off(void)
 
 static void __init iq31244_init_machine(void)
 {
+	register_iop32x_gpio();
 	platform_device_register(&iop3xx_i2c0_device);
 	platform_device_register(&iop3xx_i2c1_device);
 	platform_device_register(&iq31244_flash_device);
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
index 015435de90dd..66782ff1f46a 100644
--- a/arch/arm/mach-iop32x/iq80321.c
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -33,6 +33,7 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <mach/time.h>
+#include "gpio-iop32x.h"
 
 /*
  * IQ80321 timer tick configuration.
@@ -170,6 +171,7 @@ static struct platform_device iq80321_serial_device = {
 
 static void __init iq80321_init_machine(void)
 {
+	register_iop32x_gpio();
 	platform_device_register(&iop3xx_i2c0_device);
 	platform_device_register(&iop3xx_i2c1_device);
 	platform_device_register(&iq80321_flash_device);
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index 069144300b77..c1cd80ecc219 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -30,6 +30,7 @@
 #include <linux/platform_device.h>
 #include <linux/reboot.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -40,6 +41,7 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <mach/time.h>
+#include "gpio-iop32x.h"
 
 /*
  * N2100 timer tick configuration.
@@ -288,8 +290,14 @@ static void n2100_power_off(void)
 
 static void n2100_restart(enum reboot_mode mode, const char *cmd)
 {
-	gpio_line_set(N2100_HARDWARE_RESET, GPIO_LOW);
-	gpio_line_config(N2100_HARDWARE_RESET, GPIO_OUT);
+	int ret;
+
+	ret = gpio_direction_output(N2100_HARDWARE_RESET, 0);
+	if (ret) {
+		pr_crit("could not drive reset GPIO low\n");
+		return;
+	}
+	/* Wait for reset to happen */
 	while (1)
 		;
 }
@@ -299,7 +307,7 @@ static struct timer_list power_button_poll_timer;
 
 static void power_button_poll(unsigned long dummy)
 {
-	if (gpio_line_get(N2100_POWER_BUTTON) == 0) {
+	if (gpio_get_value(N2100_POWER_BUTTON) == 0) {
 		ctrl_alt_del();
 		return;
 	}
@@ -308,9 +316,37 @@ static void power_button_poll(unsigned long dummy)
 	add_timer(&power_button_poll_timer);
 }
 
+static int __init n2100_request_gpios(void)
+{
+	int ret;
+
+	if (!machine_is_n2100())
+		return 0;
+
+	ret = gpio_request(N2100_HARDWARE_RESET, "reset");
+	if (ret)
+		pr_err("could not request reset GPIO\n");
+
+	ret = gpio_request(N2100_POWER_BUTTON, "power");
+	if (ret)
+		pr_err("could not request power GPIO\n");
+	else {
+		ret = gpio_direction_input(N2100_POWER_BUTTON);
+		if (ret)
+			pr_err("could not set power GPIO as input\n");
+	}
+	/* Set up power button poll timer */
+	init_timer(&power_button_poll_timer);
+	power_button_poll_timer.function = power_button_poll;
+	power_button_poll_timer.expires = jiffies + (HZ / 10);
+	add_timer(&power_button_poll_timer);
+	return 0;
+}
+device_initcall(n2100_request_gpios);
 
 static void __init n2100_init_machine(void)
 {
+	register_iop32x_gpio();
 	platform_device_register(&iop3xx_i2c0_device);
 	platform_device_register(&n2100_flash_device);
 	platform_device_register(&n2100_serial_device);
@@ -321,11 +357,6 @@ static void __init n2100_init_machine(void)
 		ARRAY_SIZE(n2100_i2c_devices));
 
 	pm_power_off = n2100_power_off;
-
-	init_timer(&power_button_poll_timer);
-	power_button_poll_timer.function = power_button_poll;
-	power_button_poll_timer.expires = jiffies + (HZ / 10);
-	add_timer(&power_button_poll_timer);
 }
 
 MACHINE_START(N2100, "Thecus N2100")
diff --git a/arch/arm/mach-iop33x/include/mach/gpio.h b/arch/arm/mach-iop33x/include/mach/gpio.h
deleted file mode 100644
index ddd55bba9bb9..000000000000
--- a/arch/arm/mach-iop33x/include/mach/gpio.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_ARCH_IOP33X_GPIO_H
-#define __ASM_ARCH_IOP33X_GPIO_H
-
-#include <asm/hardware/iop3xx-gpio.h>
-
-#endif
diff --git a/arch/arm/mach-iop33x/include/mach/iop33x.h b/arch/arm/mach-iop33x/include/mach/iop33x.h
index a89c0a234bff..c95122653094 100644
--- a/arch/arm/mach-iop33x/include/mach/iop33x.h
+++ b/arch/arm/mach-iop33x/include/mach/iop33x.h
@@ -18,7 +18,6 @@
  * Peripherals that are shared between the iop32x and iop33x but
  * located at different addresses.
  */
-#define IOP3XX_GPIO_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x1780 + (reg))
 #define IOP3XX_TIMER_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x07d0 + (reg))
 
 #include <asm/hardware/iop3xx.h>
diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
index c43304a10fa7..e2cb65cfbe23 100644
--- a/arch/arm/mach-iop33x/iq80331.c
+++ b/arch/arm/mach-iop33x/iq80331.c
@@ -122,8 +122,15 @@ static struct platform_device iq80331_flash_device = {
 	.resource	= &iq80331_flash_resource,
 };
 
+static struct resource iq80331_gpio_res[] = {
+	DEFINE_RES_MEM((IOP3XX_PERIPHERAL_PHYS_BASE + 0x1780), 0x10),
+};
+
 static void __init iq80331_init_machine(void)
 {
+	platform_device_register_simple("gpio-iop", 0,
+					iq80331_gpio_res,
+					ARRAY_SIZE(iq80331_gpio_res));
 	platform_device_register(&iop3xx_i2c0_device);
 	platform_device_register(&iop3xx_i2c1_device);
 	platform_device_register(&iop33x_uart0_device);
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
index 8192987e78e5..0b6269d94f89 100644
--- a/arch/arm/mach-iop33x/iq80332.c
+++ b/arch/arm/mach-iop33x/iq80332.c
@@ -122,8 +122,15 @@ static struct platform_device iq80332_flash_device = {
 	.resource	= &iq80332_flash_resource,
 };
 
+static struct resource iq80332_gpio_res[] = {
+	DEFINE_RES_MEM((IOP3XX_PERIPHERAL_PHYS_BASE + 0x1780), 0x10),
+};
+
 static void __init iq80332_init_machine(void)
 {
+	platform_device_register_simple("gpio-iop", 0,
+					iq80332_gpio_res,
+					ARRAY_SIZE(iq80332_gpio_res));
 	platform_device_register(&iop3xx_i2c0_device);
 	platform_device_register(&iop3xx_i2c1_device);
 	platform_device_register(&iop33x_uart0_device);
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 5327decde5a0..9edaf4734fa8 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -81,6 +81,44 @@ void __init ixp4xx_map_io(void)
   	iotable_init(ixp4xx_io_desc, ARRAY_SIZE(ixp4xx_io_desc));
 }
 
+/*
+ * GPIO-functions
+ */
+/*
+ * The following converted to the real HW bits the gpio_line_config
+ */
+/* GPIO pin types */
+#define IXP4XX_GPIO_OUT 		0x1
+#define IXP4XX_GPIO_IN  		0x2
+
+/* GPIO signal types */
+#define IXP4XX_GPIO_LOW			0
+#define IXP4XX_GPIO_HIGH		1
+
+/* GPIO Clocks */
+#define IXP4XX_GPIO_CLK_0		14
+#define IXP4XX_GPIO_CLK_1		15
+
+static void gpio_line_config(u8 line, u32 direction)
+{
+	if (direction == IXP4XX_GPIO_IN)
+		*IXP4XX_GPIO_GPOER |= (1 << line);
+	else
+		*IXP4XX_GPIO_GPOER &= ~(1 << line);
+}
+
+static void gpio_line_get(u8 line, int *value)
+{
+	*value = (*IXP4XX_GPIO_GPINR >> line) & 0x1;
+}
+
+static void gpio_line_set(u8 line, int value)
+{
+	if (value == IXP4XX_GPIO_HIGH)
+	    *IXP4XX_GPIO_GPOUTR |= (1 << line);
+	else if (value == IXP4XX_GPIO_LOW)
+	    *IXP4XX_GPIO_GPOUTR &= ~(1 << line);
+}
 
 /*************************************************************************
  * IXP4xx chipset IRQ handling
@@ -117,17 +155,6 @@ static int ixp4xx_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
 	return -EINVAL;
 }
 
-int irq_to_gpio(unsigned int irq)
-{
-	int gpio = (irq < 32) ? irq2gpio[irq] : -EINVAL;
-
-	if (gpio == -1)
-		return -EINVAL;
-
-	return gpio;
-}
-EXPORT_SYMBOL(irq_to_gpio);
-
 static int ixp4xx_set_irq_type(struct irq_data *d, unsigned int type)
 {
 	int line = irq2gpio[d->irq];
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index 63de1b3fd06b..736dc692d540 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -26,6 +26,7 @@
 #include <linux/reboot.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
+#include <linux/gpio.h>
 
 #include <mach/hardware.h>
 
@@ -161,11 +162,8 @@ static struct platform_device *dsmg600_devices[] __initdata = {
 
 static void dsmg600_power_off(void)
 {
-	/* enable the pwr cntl gpio */
-	gpio_line_config(DSMG600_PO_GPIO, IXP4XX_GPIO_OUT);
-
-	/* poweroff */
-	gpio_line_set(DSMG600_PO_GPIO, IXP4XX_GPIO_HIGH);
+	/* enable the pwr cntl and drive it high */
+	gpio_direction_output(DSMG600_PO_GPIO, 1);
 }
 
 /* This is used to make sure the power-button pusher is serious.  The button
@@ -202,7 +200,7 @@ static void dsmg600_power_handler(unsigned long data)
 			ctrl_alt_del();
 
 			/* Change the state of the power LED to "blink" */
-			gpio_line_set(DSMG600_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
+			gpio_set_value(DSMG600_LED_PWR_GPIO, 0);
 		} else {
 			power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
 		}
@@ -228,6 +226,40 @@ static void __init dsmg600_timer_init(void)
     ixp4xx_timer_init();
 }
 
+static int __init dsmg600_gpio_init(void)
+{
+	if (!machine_is_dsmg600())
+		return 0;
+
+	gpio_request(DSMG600_RB_GPIO, "reset button");
+	if (request_irq(gpio_to_irq(DSMG600_RB_GPIO), &dsmg600_reset_handler,
+		IRQF_DISABLED | IRQF_TRIGGER_LOW,
+		"DSM-G600 reset button", NULL) < 0) {
+
+		printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
+			gpio_to_irq(DSMG600_RB_GPIO));
+	}
+
+	/*
+	 * The power button on the D-Link DSM-G600 is on GPIO 15, but
+	 * it cannot handle interrupts on that GPIO line.  So we'll
+	 * have to poll it with a kernel timer.
+	 */
+
+	/* Make sure that the power button GPIO is set up as an input */
+	gpio_request(DSMG600_PB_GPIO, "power button");
+	gpio_direction_input(DSMG600_PB_GPIO);
+	/* Request poweroff GPIO line */
+	gpio_request(DSMG600_PO_GPIO, "power off button");
+
+	/* Set the initial value for the power button IRQ handler */
+	power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
+
+	mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
+	return 0;
+}
+device_initcall(dsmg600_gpio_init);
+
 static void __init dsmg600_init(void)
 {
 	ixp4xx_sys_init();
@@ -251,27 +283,6 @@ static void __init dsmg600_init(void)
 	platform_add_devices(dsmg600_devices, ARRAY_SIZE(dsmg600_devices));
 
 	pm_power_off = dsmg600_power_off;
-
-	if (request_irq(gpio_to_irq(DSMG600_RB_GPIO), &dsmg600_reset_handler,
-		IRQF_DISABLED | IRQF_TRIGGER_LOW,
-		"DSM-G600 reset button", NULL) < 0) {
-
-		printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
-			gpio_to_irq(DSMG600_RB_GPIO));
-	}
-
-	/* The power button on the D-Link DSM-G600 is on GPIO 15, but
-	 * it cannot handle interrupts on that GPIO line.  So we'll
-	 * have to poll it with a kernel timer.
-	 */
-
-	/* Make sure that the power button GPIO is set up as an input */
-	gpio_line_config(DSMG600_PB_GPIO, IXP4XX_GPIO_IN);
-
-	/* Set the initial value for the power button IRQ handler */
-	power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
-
-	mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
 }
 
 MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
diff --git a/arch/arm/mach-ixp4xx/include/mach/platform.h b/arch/arm/mach-ixp4xx/include/mach/platform.h
index 4c4c6a6f4526..75c4c6572ad0 100644
--- a/arch/arm/mach-ixp4xx/include/mach/platform.h
+++ b/arch/arm/mach-ixp4xx/include/mach/platform.h
@@ -131,44 +131,5 @@ struct pci_sys_data;
 extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
 extern struct pci_ops ixp4xx_ops;
 
-/*
- * GPIO-functions
- */
-/*
- * The following converted to the real HW bits the gpio_line_config
- */
-/* GPIO pin types */
-#define IXP4XX_GPIO_OUT 		0x1
-#define IXP4XX_GPIO_IN  		0x2
-
-/* GPIO signal types */
-#define IXP4XX_GPIO_LOW			0
-#define IXP4XX_GPIO_HIGH		1
-
-/* GPIO Clocks */
-#define IXP4XX_GPIO_CLK_0		14
-#define IXP4XX_GPIO_CLK_1		15
-
-static inline void gpio_line_config(u8 line, u32 direction)
-{
-	if (direction == IXP4XX_GPIO_IN)
-		*IXP4XX_GPIO_GPOER |= (1 << line);
-	else
-		*IXP4XX_GPIO_GPOER &= ~(1 << line);
-}
-
-static inline void gpio_line_get(u8 line, int *value)
-{
-	*value = (*IXP4XX_GPIO_GPINR >> line) & 0x1;
-}
-
-static inline void gpio_line_set(u8 line, int value)
-{
-	if (value == IXP4XX_GPIO_HIGH)
-	    *IXP4XX_GPIO_GPOUTR |= (1 << line);
-	else if (value == IXP4XX_GPIO_LOW)
-	    *IXP4XX_GPIO_GPOUTR &= ~(1 << line);
-}
-
 #endif // __ASSEMBLY__
 
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index 22d688b7d513..e7b8befa8729 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -20,6 +20,7 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/delay.h>
+#include <linux/gpio.h>
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
@@ -80,10 +81,10 @@ ixdp425_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 
 	if (ctrl & NAND_CTRL_CHANGE) {
 		if (ctrl & NAND_NCE) {
-			gpio_line_set(IXDP425_NAND_NCE_PIN, IXP4XX_GPIO_LOW);
+			gpio_set_value(IXDP425_NAND_NCE_PIN, 0);
 			udelay(5);
 		} else
-			gpio_line_set(IXDP425_NAND_NCE_PIN, IXP4XX_GPIO_HIGH);
+			gpio_set_value(IXDP425_NAND_NCE_PIN, 1);
 
 		offset = (ctrl & NAND_CLE) ? IXDP425_NAND_CMD_BYTE : 0;
 		offset |= (ctrl & NAND_ALE) ? IXDP425_NAND_ADDR_BYTE : 0;
@@ -227,7 +228,8 @@ static void __init ixdp425_init(void)
 	ixdp425_flash_nand_resource.start = IXP4XX_EXP_BUS_BASE(3),
 	ixdp425_flash_nand_resource.end   = IXP4XX_EXP_BUS_BASE(3) + 0x10 - 1;
 
-	gpio_line_config(IXDP425_NAND_NCE_PIN, IXP4XX_GPIO_OUT);
+	gpio_request(IXDP425_NAND_NCE_PIN, "NAND NCE pin");
+	gpio_direction_output(IXDP425_NAND_NCE_PIN, 0);
 
 	/* Configure expansion bus for NAND Flash */
 	*IXP4XX_EXP_CS3 = IXP4XX_EXP_BUS_CS_EN |
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index ed667ce9f576..507cb5233537 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -184,11 +184,8 @@ static void nas100d_power_off(void)
 {
 	/* This causes the box to drop the power and go dead. */
 
-	/* enable the pwr cntl gpio */
-	gpio_line_config(NAS100D_PO_GPIO, IXP4XX_GPIO_OUT);
-
-	/* do the deed */
-	gpio_line_set(NAS100D_PO_GPIO, IXP4XX_GPIO_HIGH);
+	/* enable the pwr cntl gpio and assert power off */
+	gpio_direction_output(NAS100D_PO_GPIO, 1);
 }
 
 /* This is used to make sure the power-button pusher is serious.  The button
@@ -225,7 +222,7 @@ static void nas100d_power_handler(unsigned long data)
 			ctrl_alt_del();
 
 			/* Change the state of the power LED to "blink" */
-			gpio_line_set(NAS100D_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
+			gpio_set_value(NAS100D_LED_PWR_GPIO, 0);
 		} else {
 			power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
 		}
@@ -242,6 +239,33 @@ static irqreturn_t nas100d_reset_handler(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static int __init nas100d_gpio_init(void)
+{
+	if (!machine_is_nas100d())
+		return 0;
+
+	/*
+	 * The power button on the Iomega NAS100d is on GPIO 14, but
+	 * it cannot handle interrupts on that GPIO line.  So we'll
+	 * have to poll it with a kernel timer.
+	 */
+
+	/* Request the power off GPIO */
+	gpio_request(NAS100D_PO_GPIO, "power off");
+
+	/* Make sure that the power button GPIO is set up as an input */
+	gpio_request(NAS100D_PB_GPIO, "power button");
+	gpio_direction_input(NAS100D_PB_GPIO);
+
+	/* Set the initial value for the power button IRQ handler */
+	power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
+
+	mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500));
+
+	return 0;
+}
+device_initcall(nas100d_gpio_init);
+
 static void __init nas100d_init(void)
 {
 	uint8_t __iomem *f;
@@ -278,19 +302,6 @@ static void __init nas100d_init(void)
 			gpio_to_irq(NAS100D_RB_GPIO));
 	}
 
-	/* The power button on the Iomega NAS100d is on GPIO 14, but
-	 * it cannot handle interrupts on that GPIO line.  So we'll
-	 * have to poll it with a kernel timer.
-	 */
-
-	/* Make sure that the power button GPIO is set up as an input */
-	gpio_line_config(NAS100D_PB_GPIO, IXP4XX_GPIO_IN);
-
-	/* Set the initial value for the power button IRQ handler */
-	power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
-
-	mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500));
-
 	/*
 	 * Map in a portion of the flash and read the MAC address.
 	 * Since it is stored in BE in the flash itself, we need to
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index 7e55236c26ea..ba5f1cda2a9d 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -197,11 +197,8 @@ static void nslu2_power_off(void)
 {
 	/* This causes the box to drop the power and go dead. */
 
-	/* enable the pwr cntl gpio */
-	gpio_line_config(NSLU2_PO_GPIO, IXP4XX_GPIO_OUT);
-
-	/* do the deed */
-	gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH);
+	/* enable the pwr cntl gpio and assert power off */
+	gpio_direction_output(NSLU2_PO_GPIO, 1);
 }
 
 static irqreturn_t nslu2_power_handler(int irq, void *dev_id)
@@ -223,6 +220,16 @@ static irqreturn_t nslu2_reset_handler(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static int __init nslu2_gpio_init(void)
+{
+	if (!machine_is_nslu2())
+		return 0;
+
+	/* Request the power off GPIO */
+	return gpio_request(NSLU2_PO_GPIO, "power off");
+}
+device_initcall(nslu2_gpio_init);
+
 static void __init nslu2_timer_init(void)
 {
     /* The xtal on this machine is non-standard. */
diff --git a/arch/arm/mach-mmp/include/mach/gpio.h b/arch/arm/mach-mmp/include/mach/gpio.h
deleted file mode 100644
index 13219ebf5128..000000000000
--- a/arch/arm/mach-mmp/include/mach/gpio.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef __ASM_MACH_GPIO_H
-#define __ASM_MACH_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-#include <mach/cputype.h>
-
-#endif /* __ASM_MACH_GPIO_H */
diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h
deleted file mode 100644
index 0248e433bc98..000000000000
--- a/arch/arm/mach-pxa/include/mach/gpio.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/gpio.h
- *
- * PXA GPIO wrappers for arch-neutral GPIO calls
- *
- * Written by Philipp Zabel <philipp.zabel@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_PXA_GPIO_H
-#define __ASM_ARCH_PXA_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-
-#endif
diff --git a/arch/arm/mach-w90x900/include/mach/gpio.h b/arch/arm/mach-w90x900/include/mach/gpio.h
deleted file mode 100644
index 5385a4203277..000000000000
--- a/arch/arm/mach-w90x900/include/mach/gpio.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * linux/arch/arm/mach-w90p910/include/mach/gpio.h
- *
- * Generic w90p910 GPIO handling
- *
- *  Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_W90P910_GPIO_H
-#define __ASM_ARCH_W90P910_GPIO_H
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-	return gpio;
-}
-#define gpio_to_irq gpio_to_irq
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return irq;
-}
-
-#endif
diff --git a/arch/arm/plat-iop/Makefile b/arch/arm/plat-iop/Makefile
index a99dc15a70f7..224e56c6049b 100644
--- a/arch/arm/plat-iop/Makefile
+++ b/arch/arm/plat-iop/Makefile
@@ -5,7 +5,6 @@
 obj-y :=
 
 # IOP32X
-obj-$(CONFIG_ARCH_IOP32X) += gpio.o
 obj-$(CONFIG_ARCH_IOP32X) += i2c.o
 obj-$(CONFIG_ARCH_IOP32X) += pci.o
 obj-$(CONFIG_ARCH_IOP32X) += setup.o
@@ -16,7 +15,6 @@ obj-$(CONFIG_ARCH_IOP32X) += pmu.o
 obj-$(CONFIG_ARCH_IOP32X) += restart.o
 
 # IOP33X
-obj-$(CONFIG_ARCH_IOP33X) += gpio.o
 obj-$(CONFIG_ARCH_IOP33X) += i2c.o
 obj-$(CONFIG_ARCH_IOP33X) += pci.o
 obj-$(CONFIG_ARCH_IOP33X) += setup.o
diff --git a/arch/arm/plat-iop/gpio.c b/arch/arm/plat-iop/gpio.c
deleted file mode 100644
index 697de6dc4936..000000000000
--- a/arch/arm/plat-iop/gpio.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * arch/arm/plat-iop/gpio.c
- * GPIO handling for Intel IOP3xx processors.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/gpio.h>
-#include <linux/export.h>
-#include <asm/hardware/iop3xx.h>
-#include <mach/gpio.h>
-
-void gpio_line_config(int line, int direction)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	if (direction == GPIO_IN) {
-		*IOP3XX_GPOE |= 1 << line;
-	} else if (direction == GPIO_OUT) {
-		*IOP3XX_GPOE &= ~(1 << line);
-	}
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(gpio_line_config);
-
-int gpio_line_get(int line)
-{
-	return !!(*IOP3XX_GPID & (1 << line));
-}
-EXPORT_SYMBOL(gpio_line_get);
-
-void gpio_line_set(int line, int value)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	if (value == GPIO_LOW) {
-		*IOP3XX_GPOD &= ~(1 << line);
-	} else if (value == GPIO_HIGH) {
-		*IOP3XX_GPOD |= 1 << line;
-	}
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(gpio_line_set);
-
-static int iop3xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
-{
-	gpio_line_config(gpio, GPIO_IN);
-	return 0;
-}
-
-static int iop3xx_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, int level)
-{
-	gpio_line_set(gpio, level);
-	gpio_line_config(gpio, GPIO_OUT);
-	return 0;
-}
-
-static int iop3xx_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
-{
-	return gpio_line_get(gpio);
-}
-
-static void iop3xx_gpio_set_value(struct gpio_chip *chip, unsigned gpio, int value)
-{
-	gpio_line_set(gpio, value);
-}
-
-static struct gpio_chip iop3xx_chip = {
-	.label			= "iop3xx",
-	.direction_input	= iop3xx_gpio_direction_input,
-	.get			= iop3xx_gpio_get_value,
-	.direction_output	= iop3xx_gpio_direction_output,
-	.set			= iop3xx_gpio_set_value,
-	.base			= 0,
-	.ngpio			= IOP3XX_N_GPIOS,
-};
-
-static int __init iop3xx_gpio_setup(void)
-{
-	return gpiochip_add(&iop3xx_chip);
-}
-arch_initcall(iop3xx_gpio_setup);