Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Arnd Bergmann:
 "This round of fixes has two larger changes that came in last week:

   - a couple of patches all intended to finally turn on USB support on
     various Amlogic SoC based boards. The respective driver were not
     finalized until very late before the merge window and the DT
     portion is the last bit now.

   - a defconfig update for gemini that had repeatedly missed the cut
     but that is required to actually boot any real machines with the
     default build.

  The rest are the usual small changes:

   - a fix for a nasty build regression on the OMAP memory drivers

   - a fix for a boot problem on Intel/Altera SocFPGA

   - a MAINTAINER file update

   - a couple of fixes for issues found by automated testing (kernelci,
     coverity, sparse, ...)

   - a few incorrect DT entries are updated to match the hardware"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: defconfig: Update Gemini defconfig
  ARM: s3c24xx: jive: Fix some GPIO names
  HISI LPC: Add Kconfig MFD_CORE dependency
  ARM: dts: Fix NAS4220B pin config
  MAINTAINERS: Remove myself as maintainer
  arm64: dts: correct SATA addresses for Stingray
  ARM64: dts: meson-gxm-khadas-vim2: enable the USB controller
  ARM64: dts: meson-gxl-nexbox-a95x: enable the USB controller
  ARM64: dts: meson-gxl-s905x-libretech-cc: enable the USB controller
  ARM64: dts: meson-gx-p23x-q20x: enable the USB controller
  ARM64: dts: meson-gxl-s905x-p212: enable the USB controller
  ARM64: dts: meson-gxm: add GXM specific USB host configuration
  ARM64: dts: meson-gxl: add USB host support
  ARM: OMAP2+: Fix build when using split object directories
  soc: bcm2835: Make !RASPBERRYPI_FIRMWARE dummies return failure
  soc: bcm: raspberrypi-power: Fix use of __packed
  ARM: dts: Fix cm2 and prm sizes for omap4
  ARM: socfpga_defconfig: Remove QSPI Sector 4K size force
  firmware: arm_scmi: remove redundant null check on array
  arm64: dts: juno: drop unnecessary address-cells and size-cells properties

18 files changed, 196 insertions, 71 deletions

diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini-nas4220b.dts
index 8bbb6f85d161..4785fbcc41ed 100644
--- a/arch/arm/boot/dts/gemini-nas4220b.dts
+++ b/arch/arm/boot/dts/gemini-nas4220b.dts
@@ -134,37 +134,37 @@
 						function = "gmii";
 						groups = "gmii_gmac0_grp";
 					};
-					/* Settings come from OpenWRT */
+					/* Settings come from OpenWRT, pins on SL3516 */
 					conf0 {
-						pins = "R8 GMAC0 RXDV", "U11 GMAC1 RXDV";
+						pins = "V8 GMAC0 RXDV", "T10 GMAC1 RXDV";
 						skew-delay = <0>;
 					};
 					conf1 {
-						pins = "T8 GMAC0 RXC", "T11 GMAC1 RXC";
+						pins = "Y7 GMAC0 RXC", "Y11 GMAC1 RXC";
 						skew-delay = <15>;
 					};
 					conf2 {
-						pins = "P8 GMAC0 TXEN", "V11 GMAC1 TXEN";
+						pins = "T8 GMAC0 TXEN", "W11 GMAC1 TXEN";
 						skew-delay = <7>;
 					};
 					conf3 {
-						pins = "V7 GMAC0 TXC";
+						pins = "U8 GMAC0 TXC";
 						skew-delay = <11>;
 					};
 					conf4 {
-						pins = "P10 GMAC1 TXC";
+						pins = "V11 GMAC1 TXC";
 						skew-delay = <10>;
 					};
 					conf5 {
 						/* The data lines all have default skew */
-						pins = "U8 GMAC0 RXD0", "V8 GMAC0 RXD1",
-						       "P9 GMAC0 RXD2", "R9 GMAC0 RXD3",
-						       "U7 GMAC0 TXD0", "T7 GMAC0 TXD1",
-						       "R7 GMAC0 TXD2", "P7 GMAC0 TXD3",
-						       "R11 GMAC1 RXD0", "P11 GMAC1 RXD1",
-						       "V12 GMAC1 RXD2", "U12 GMAC1 RXD3",
-						       "R10 GMAC1 TXD0", "T10 GMAC1 TXD1",
-						       "U10 GMAC1 TXD2", "V10 GMAC1 TXD3";
+						pins = "W8 GMAC0 RXD0", "V9 GMAC0 RXD1",
+						       "Y8 GMAC0 RXD2", "U9 GMAC0 RXD3",
+						       "T7 GMAC0 TXD0", "U6 GMAC0 TXD1",
+						       "V7 GMAC0 TXD2", "U7 GMAC0 TXD3",
+						       "Y12 GMAC1 RXD0", "V12 GMAC1 RXD1",
+						       "T11 GMAC1 RXD2", "W12 GMAC1 RXD3",
+						       "U10 GMAC1 TXD0", "Y10 GMAC1 TXD1",
+						       "W10 GMAC1 TXD2", "T9 GMAC1 TXD3";
 						skew-delay = <7>;
 					};
 					/* Set up drive strength on GMAC0 to 16 mA */
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 475904894b86..e554b6e039f3 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -163,10 +163,10 @@
 
 			cm2: cm2@8000 {
 				compatible = "ti,omap4-cm2", "simple-bus";
-				reg = <0x8000 0x3000>;
+				reg = <0x8000 0x2000>;
 				#address-cells = <1>;
 				#size-cells = <1>;
-				ranges = <0 0x8000 0x3000>;
+				ranges = <0 0x8000 0x2000>;
 
 				cm2_clocks: clocks {
 					#address-cells = <1>;
@@ -250,11 +250,11 @@
 
 				prm: prm@6000 {
 					compatible = "ti,omap4-prm";
-					reg = <0x6000 0x3000>;
+					reg = <0x6000 0x2000>;
 					interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 					#address-cells = <1>;
 					#size-cells = <1>;
-					ranges = <0 0x6000 0x3000>;
+					ranges = <0 0x6000 0x2000>;
 
 					prm_clocks: clocks {
 						#address-cells = <1>;
diff --git a/arch/arm/configs/gemini_defconfig b/arch/arm/configs/gemini_defconfig
index 2a63fa10c813..553777ac2814 100644
--- a/arch/arm/configs/gemini_defconfig
+++ b/arch/arm/configs/gemini_defconfig
@@ -1,6 +1,7 @@
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_USER_NS=y
 CONFIG_RELAY=y
@@ -12,15 +13,21 @@ CONFIG_ARCH_GEMINI=y
 CONFIG_PCI=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+CONFIG_CMA=y
 CONFIG_CMDLINE="console=ttyS0,115200n8"
 CONFIG_KEXEC=y
 CONFIG_BINFMT_MISC=y
 CONFIG_PM=y
+CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
@@ -33,6 +40,11 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_ATA=y
 CONFIG_PATA_FTIDE010=y
+CONFIG_NETDEVICES=y
+CONFIG_GEMINI_ETHERNET=y
+CONFIG_MDIO_BITBANG=y
+CONFIG_MDIO_GPIO=y
+CONFIG_REALTEK_PHY=y
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
@@ -43,9 +55,19 @@ CONFIG_SERIAL_8250_NR_UARTS=1
 CONFIG_SERIAL_8250_RUNTIME_UARTS=1
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
+CONFIG_I2C_GPIO=y
+CONFIG_SPI=y
+CONFIG_SPI_GPIO=y
+CONFIG_SENSORS_GPIO_FAN=y
+CONFIG_SENSORS_LM75=y
+CONFIG_THERMAL=y
 CONFIG_WATCHDOG=y
-CONFIG_GEMINI_WATCHDOG=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_DRM=y
+CONFIG_DRM_PANEL_ILITEK_IL9322=y
+CONFIG_DRM_TVE200=y
+CONFIG_LOGO=y
 CONFIG_USB=y
 CONFIG_USB_MON=y
 CONFIG_USB_FOTG210_HCD=y
@@ -54,6 +76,7 @@ CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_DISK=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
 CONFIG_DMADEVICES=y
diff --git a/arch/arm/configs/socfpga_defconfig b/arch/arm/configs/socfpga_defconfig
index 2620ce790db0..371fca4e1ab7 100644
--- a/arch/arm/configs/socfpga_defconfig
+++ b/arch/arm/configs/socfpga_defconfig
@@ -57,6 +57,7 @@ CONFIG_MTD_M25P80=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_DENALI_DT=y
 CONFIG_MTD_SPI_NOR=y
+# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
 CONFIG_SPI_CADENCE_QUADSPI=y
 CONFIG_OF_OVERLAY=y
 CONFIG_OF_CONFIGFS=y
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 4603c30fef73..0d9ce58bc464 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -243,8 +243,4 @@ arch/arm/mach-omap2/pm-asm-offsets.s: arch/arm/mach-omap2/pm-asm-offsets.c
 include/generated/ti-pm-asm-offsets.h: arch/arm/mach-omap2/pm-asm-offsets.s FORCE
 	$(call filechk,offsets,__TI_PM_ASM_OFFSETS_H__)
 
-# For rule to generate ti-emif-asm-offsets.h dependency
-include drivers/memory/Makefile.asm-offsets
-
-arch/arm/mach-omap2/sleep33xx.o: include/generated/ti-pm-asm-offsets.h include/generated/ti-emif-asm-offsets.h
-arch/arm/mach-omap2/sleep43xx.o: include/generated/ti-pm-asm-offsets.h include/generated/ti-emif-asm-offsets.h
+$(obj)/sleep33xx.o $(obj)/sleep43xx.o: include/generated/ti-pm-asm-offsets.h
diff --git a/arch/arm/mach-omap2/pm-asm-offsets.c b/arch/arm/mach-omap2/pm-asm-offsets.c
index 6d4392da7c11..b9846b19e5e2 100644
--- a/arch/arm/mach-omap2/pm-asm-offsets.c
+++ b/arch/arm/mach-omap2/pm-asm-offsets.c
@@ -7,9 +7,12 @@
 
 #include <linux/kbuild.h>
 #include <linux/platform_data/pm33xx.h>
+#include <linux/ti-emif-sram.h>
 
 int main(void)
 {
+	ti_emif_asm_offsets();
+
 	DEFINE(AMX3_PM_WFI_FLAGS_OFFSET,
 	       offsetof(struct am33xx_pm_sram_data, wfi_flags));
 	DEFINE(AMX3_PM_L2_AUX_CTRL_VAL_OFFSET,
diff --git a/arch/arm/mach-omap2/sleep33xx.S b/arch/arm/mach-omap2/sleep33xx.S
index 218d79930b04..322b3bb868b4 100644
--- a/arch/arm/mach-omap2/sleep33xx.S
+++ b/arch/arm/mach-omap2/sleep33xx.S
@@ -6,7 +6,6 @@
  *	Dave Gerlach, Vaibhav Bedia
  */
 
-#include <generated/ti-emif-asm-offsets.h>
 #include <generated/ti-pm-asm-offsets.h>
 #include <linux/linkage.h>
 #include <linux/ti-emif-sram.h>
diff --git a/arch/arm/mach-omap2/sleep43xx.S b/arch/arm/mach-omap2/sleep43xx.S
index b24be624e8b9..8903814a6677 100644
--- a/arch/arm/mach-omap2/sleep43xx.S
+++ b/arch/arm/mach-omap2/sleep43xx.S
@@ -6,7 +6,6 @@
  *	Dave Gerlach, Vaibhav Bedia
  */
 
-#include <generated/ti-emif-asm-offsets.h>
 #include <generated/ti-pm-asm-offsets.h>
 #include <linux/linkage.h>
 #include <linux/ti-emif-sram.h>
diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c
index 59589a4a0d4b..885e8f12e4b9 100644
--- a/arch/arm/mach-s3c24xx/mach-jive.c
+++ b/arch/arm/mach-s3c24xx/mach-jive.c
@@ -427,9 +427,9 @@ static struct gpiod_lookup_table jive_wm8750_gpiod_table = {
 	.dev_id         = "spi_gpio",
 	.table          = {
 		GPIO_LOOKUP("GPIOB", 4,
-			    "gpio-sck", GPIO_ACTIVE_HIGH),
+			    "sck", GPIO_ACTIVE_HIGH),
 		GPIO_LOOKUP("GPIOB", 9,
-			    "gpio-mosi", GPIO_ACTIVE_HIGH),
+			    "mosi", GPIO_ACTIVE_HIGH),
 		GPIO_LOOKUP("GPIOH", 10,
 			    "cs", GPIO_ACTIVE_HIGH),
 		{ },
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
index 4eef36b22538..88e712ea757a 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
@@ -212,3 +212,7 @@
 	pinctrl-0 = <&uart_ao_a_pins>;
 	pinctrl-names = "default";
 };
+
+&usb0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
index 22bf37404ff1..3e3eb31748a3 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
@@ -271,3 +271,15 @@
 	pinctrl-0 = <&uart_ao_a_pins>;
 	pinctrl-names = "default";
 };
+
+&usb0 {
+	status = "okay";
+};
+
+&usb2_phy0 {
+	/*
+	 * even though the schematics don't show it:
+	 * HDMI_5V is also used as supply for the USB VBUS.
+	 */
+	phy-supply = <&hdmi_5v>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
index 69c721a70e44..6739697be1de 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
@@ -215,3 +215,7 @@
 	pinctrl-0 = <&uart_ao_a_pins>;
 	pinctrl-names = "default";
 };
+
+&usb0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
index 0a0953fbc7d4..0cfd701809de 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
@@ -185,3 +185,7 @@
 	pinctrl-0 = <&uart_ao_a_pins>;
 	pinctrl-names = "default";
 };
+
+&usb0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index e1a39cbed8c9..dba365ed4bd5 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -20,6 +20,67 @@
 			no-map;
 		};
 	};
+
+	soc {
+		usb0: usb@c9000000 {
+			status = "disabled";
+			compatible = "amlogic,meson-gxl-dwc3";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&clkc CLKID_USB>;
+			clock-names = "usb_general";
+			resets = <&reset RESET_USB_OTG>;
+			reset-names = "usb_otg";
+
+			dwc3: dwc3@c9000000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0xc9000000 0x0 0x100000>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				maximum-speed = "high-speed";
+				snps,dis_u2_susphy_quirk;
+				phys = <&usb3_phy>, <&usb2_phy0>, <&usb2_phy1>;
+			};
+		};
+	};
+};
+
+&apb {
+	usb2_phy0: phy@78000 {
+		compatible = "amlogic,meson-gxl-usb2-phy";
+		#phy-cells = <0>;
+		reg = <0x0 0x78000 0x0 0x20>;
+		clocks = <&clkc CLKID_USB>;
+		clock-names = "phy";
+		resets = <&reset RESET_USB_OTG>;
+		reset-names = "phy";
+		status = "okay";
+	};
+
+	usb2_phy1: phy@78020 {
+		compatible = "amlogic,meson-gxl-usb2-phy";
+		#phy-cells = <0>;
+		reg = <0x0 0x78020 0x0 0x20>;
+		clocks = <&clkc CLKID_USB>;
+		clock-names = "phy";
+		resets = <&reset RESET_USB_OTG>;
+		reset-names = "phy";
+		status = "okay";
+	};
+
+	usb3_phy: phy@78080 {
+		compatible = "amlogic,meson-gxl-usb3-phy";
+		#phy-cells = <0>;
+		reg = <0x0 0x78080 0x0 0x20>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clkc CLKID_USB>, <&clkc_AO CLKID_AO_CEC_32K>;
+		clock-names = "phy", "peripheral";
+		resets = <&reset RESET_USB_OTG>, <&reset RESET_USB_OTG>;
+		reset-names = "phy", "peripheral";
+		status = "okay";
+	};
 };
 
 &ethmac {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
index 4fd46c1546a7..0868da476e41 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
@@ -406,3 +406,7 @@
 	status = "okay";
 	vref-supply = <&vddio_ao18>;
 };
+
+&usb0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
index d076a7c425dd..247888d68a3a 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
@@ -80,6 +80,19 @@
 	};
 };
 
+&apb {
+	usb2_phy2: phy@78040 {
+		compatible = "amlogic,meson-gxl-usb2-phy";
+		#phy-cells = <0>;
+		reg = <0x0 0x78040 0x0 0x20>;
+		clocks = <&clkc CLKID_USB>;
+		clock-names = "phy";
+		resets = <&reset RESET_USB_OTG>;
+		reset-names = "phy";
+		status = "okay";
+	};
+};
+
 &clkc_AO {
 	compatible = "amlogic,meson-gxm-aoclkc", "amlogic,meson-gx-aoclkc";
 };
@@ -100,3 +113,7 @@
 &hdmi_tx {
 	compatible = "amlogic,meson-gxm-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
 };
+
+&dwc3 {
+	phys = <&usb3_phy>, <&usb2_phy0>, <&usb2_phy1>, <&usb2_phy2>;
+};
diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
index 2ac43221ddb6..69804c5f1197 100644
--- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
@@ -56,8 +56,6 @@
 
 			gpio_keys {
 				compatible = "gpio-keys";
-				#address-cells = <1>;
-				#size-cells = <0>;
 
 				power-button {
 					debounce_interval = <50>;
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi
index 4b5465da81d8..8c68e0c26f1b 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi
@@ -36,11 +36,11 @@
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x67d00000 0x00800000>;
 
-		sata0: ahci@210000 {
+		sata0: ahci@0 {
 			compatible = "brcm,iproc-ahci", "generic-ahci";
-			reg = <0x00210000 0x1000>;
+			reg = <0x00000000 0x1000>;
 			reg-names = "ahci";
-			interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -52,9 +52,9 @@
 			};
 		};
 
-		sata_phy0: sata_phy@212100 {
+		sata_phy0: sata_phy@2100 {
 			compatible = "brcm,iproc-sr-sata-phy";
-			reg = <0x00212100 0x1000>;
+			reg = <0x00002100 0x1000>;
 			reg-names = "phy";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -66,11 +66,11 @@
 			};
 		};
 
-		sata1: ahci@310000 {
+		sata1: ahci@10000 {
 			compatible = "brcm,iproc-ahci", "generic-ahci";
-			reg = <0x00310000 0x1000>;
+			reg = <0x00010000 0x1000>;
 			reg-names = "ahci";
-			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -82,9 +82,9 @@
 			};
 		};
 
-		sata_phy1: sata_phy@312100 {
+		sata_phy1: sata_phy@12100 {
 			compatible = "brcm,iproc-sr-sata-phy";
-			reg = <0x00312100 0x1000>;
+			reg = <0x00012100 0x1000>;
 			reg-names = "phy";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -96,11 +96,11 @@
 			};
 		};
 
-		sata2: ahci@120000 {
+		sata2: ahci@20000 {
 			compatible = "brcm,iproc-ahci", "generic-ahci";
-			reg = <0x00120000 0x1000>;
+			reg = <0x00020000 0x1000>;
 			reg-names = "ahci";
-			interrupts = <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -112,9 +112,9 @@
 			};
 		};
 
-		sata_phy2: sata_phy@122100 {
+		sata_phy2: sata_phy@22100 {
 			compatible = "brcm,iproc-sr-sata-phy";
-			reg = <0x00122100 0x1000>;
+			reg = <0x00022100 0x1000>;
 			reg-names = "phy";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -126,11 +126,11 @@
 			};
 		};
 
-		sata3: ahci@130000 {
+		sata3: ahci@30000 {
 			compatible = "brcm,iproc-ahci", "generic-ahci";
-			reg = <0x00130000 0x1000>;
+			reg = <0x00030000 0x1000>;
 			reg-names = "ahci";
-			interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -142,9 +142,9 @@
 			};
 		};
 
-		sata_phy3: sata_phy@132100 {
+		sata_phy3: sata_phy@32100 {
 			compatible = "brcm,iproc-sr-sata-phy";
-			reg = <0x00132100 0x1000>;
+			reg = <0x00032100 0x1000>;
 			reg-names = "phy";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -156,11 +156,11 @@
 			};
 		};
 
-		sata4: ahci@330000 {
+		sata4: ahci@100000 {
 			compatible = "brcm,iproc-ahci", "generic-ahci";
-			reg = <0x00330000 0x1000>;
+			reg = <0x00100000 0x1000>;
 			reg-names = "ahci";
-			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -172,9 +172,9 @@
 			};
 		};
 
-		sata_phy4: sata_phy@332100 {
+		sata_phy4: sata_phy@102100 {
 			compatible = "brcm,iproc-sr-sata-phy";
-			reg = <0x00332100 0x1000>;
+			reg = <0x00102100 0x1000>;
 			reg-names = "phy";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -186,11 +186,11 @@
 			};
 		};
 
-		sata5: ahci@400000 {
+		sata5: ahci@110000 {
 			compatible = "brcm,iproc-ahci", "generic-ahci";
-			reg = <0x00400000 0x1000>;
+			reg = <0x00110000 0x1000>;
 			reg-names = "ahci";
-			interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -202,9 +202,9 @@
 			};
 		};
 
-		sata_phy5: sata_phy@402100 {
+		sata_phy5: sata_phy@112100 {
 			compatible = "brcm,iproc-sr-sata-phy";
-			reg = <0x00402100 0x1000>;
+			reg = <0x00112100 0x1000>;
 			reg-names = "phy";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -216,11 +216,11 @@
 			};
 		};
 
-		sata6: ahci@410000 {
+		sata6: ahci@120000 {
 			compatible = "brcm,iproc-ahci", "generic-ahci";
-			reg = <0x00410000 0x1000>;
+			reg = <0x00120000 0x1000>;
 			reg-names = "ahci";
-			interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -232,9 +232,9 @@
 			};
 		};
 
-		sata_phy6: sata_phy@412100 {
+		sata_phy6: sata_phy@122100 {
 			compatible = "brcm,iproc-sr-sata-phy";
-			reg = <0x00412100 0x1000>;
+			reg = <0x00122100 0x1000>;
 			reg-names = "phy";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -246,11 +246,11 @@
 			};
 		};
 
-		sata7: ahci@420000 {
+		sata7: ahci@130000 {
 			compatible = "brcm,iproc-ahci", "generic-ahci";
-			reg = <0x00420000 0x1000>;
+			reg = <0x00130000 0x1000>;
 			reg-names = "ahci";
-			interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -262,9 +262,9 @@
 			};
 		};
 
-		sata_phy7: sata_phy@422100 {
+		sata_phy7: sata_phy@132100 {
 			compatible = "brcm,iproc-sr-sata-phy";
-			reg = <0x00422100 0x1000>;
+			reg = <0x00132100 0x1000>;
 			reg-names = "phy";
 			#address-cells = <1>;
 			#size-cells = <0>;