Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "Our first batch of fixes this release cycle, unfortunately a bit
  noisier than usual. Two major groups stand out:

   - Some pinctril dts/dtsi changes for stm32 due to a new driver being
     merged during the merge window, and this aligns the DT contents
     between the old format and the new. This could arguably be moved to
     the next merge window but it also seemed relatively harmless to
     include now.

   - Amlogic/meson had driver changes merged that required devicetree
     changes to avoid functional/performance regressions. I've already
     asked them to be more careful about this going forward, and making
     sure drivers are compatible with older DTs when they make these
     kind of changes. The platform is actively being upstreamed so
     there's a few things in flight, we've seen this happen before and
     sometimes it's hard to catch in time.

  Besides that there is the usual mix of minor fixes"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (33 commits)
  ARM: dts: stm32: use right pinctrl compatible for stm32f469
  ARM: dts: stm32: Fix STMPE1600 binding on stm32429i-eval board
  ARM: defconfig: update Gemini defconfig
  ARM: defconfig: FRAMEBUFFER_CONSOLE can no longer be =m
  arm64: dts: rockchip: add the grf clk for dw-mipi-dsi on rk3399
  reset: Restrict RESET_HSDK to ARC_SOC_HSDK or COMPILE_TEST
  ARM: dts: da850-evm: add serial and ethernet aliases
  ARM: dts: am43xx-epos-evm: Remove extra CPSW EMAC entry
  ARM: dts: am33xx: Add spi alias to match SOC schematics
  ARM: OMAP2+: hsmmc: fix logic to call either omap_hsmmc_init or omap_hsmmc_late_init but not both
  ARM: dts: dra7: Set a default parent to mcasp3_ahclkx_mux
  ARM: OMAP2+: dra7xx: Set OPT_CLKS_IN_RESET flag for gpio1
  ARM: dts: nokia n900: drop unneeded/undocumented parts of the dts
  arm64: dts: rockchip: Correct MIPI DPHY PLL clock on rk3399
  arm64: dt marvell: Fix AP806 system controller size
  MAINTAINERS: add Macchiatobin maintainers entry
  ARC: reset: remove the misleading v1 suffix all over
  ARC: reset: add missing DT binding documentation for HSDKv1 reset driver
  ARC: reset: Only build on archs that have IOMEM
  ARM: at91: Replace uses of virt_to_phys with __pa_symbol
  ...

37 files changed, 728 insertions, 456 deletions

diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 7d7ca054c557..e58fab8aec5d 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -36,6 +36,8 @@
 		phy1 = &usb1_phy;
 		ethernet0 = &cpsw_emac0;
 		ethernet1 = &cpsw_emac1;
+		spi0 = &spi0;
+		spi1 = &spi1;
 	};
 
 	cpus {
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 9d276af7c539..081fa68b6f98 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -388,6 +388,7 @@
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
 	status = "okay";
+	slaves = <1>;
 };
 
 &davinci_mdio {
@@ -402,11 +403,6 @@
 	phy-mode = "rmii";
 };
 
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "rmii";
-};
-
 &phy_sel {
 	rmii-clock-ext;
 };
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index 9c9088c99cc4..60cb084a8d92 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -67,7 +67,10 @@
 
 		usb1: ohci@00400000 {
 			num-ports = <3>;
-			atmel,vbus-gpio = <&pioA PIN_PA10 GPIO_ACTIVE_HIGH>;
+			atmel,vbus-gpio = <0 /* &pioA PIN_PD20 GPIO_ACTIVE_HIGH */
+					   &pioA PIN_PA27 GPIO_ACTIVE_HIGH
+					   0
+					  >;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb_default>;
 			status = "okay";
@@ -120,7 +123,7 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_mikrobus2_uart>;
 				atmel,use-dma-rx;
-				atmel-use-dma-tx;
+				atmel,use-dma-tx;
 				status = "okay";
 			};
 
@@ -178,7 +181,7 @@
 			uart4: serial@fc00c000 {
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
-				pinctrl-name = "default";
+				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_mikrobus1_uart>;
 				status = "okay";
 			};
@@ -330,7 +333,7 @@
 				};
 
 				pinctrl_led_gpio_default: led_gpio_default {
-					pinmux = <PIN_PA27__GPIO>,
+					pinmux = <PIN_PA10__GPIO>,
 						 <PIN_PB1__GPIO>,
 						 <PIN_PA31__GPIO>;
 					bias-pull-up;
@@ -396,7 +399,7 @@
 				};
 
 				pinctrl_usb_default: usb_default {
-					pinmux = <PIN_PA10__GPIO>,
+					pinmux = <PIN_PA27__GPIO>,
 						 <PIN_PD19__GPIO>;
 					bias-disable;
 				};
@@ -520,17 +523,17 @@
 
 		red {
 			label = "red";
-			gpios = <&pioA PIN_PA27 GPIO_ACTIVE_LOW>;
+			gpios = <&pioA PIN_PA10 GPIO_ACTIVE_HIGH>;
 		};
 
 		green {
 			label = "green";
-			gpios = <&pioA PIN_PB1 GPIO_ACTIVE_LOW>;
+			gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>;
 		};
 
 		blue {
 			label = "blue";
-			gpios = <&pioA PIN_PA31 GPIO_ACTIVE_LOW>;
+			gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index 67e72bc72e80..c75507922f7d 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -15,6 +15,13 @@
 	compatible = "ti,da850-evm", "ti,da850";
 	model = "DA850/AM1808/OMAP-L138 EVM";
 
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		ethernet0 = &eth0;
+	};
+
 	soc@1c00000 {
 		pmx_core: pinmux@14120 {
 			status = "okay";
diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index cf229dfabf61..e62b62875cba 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -1817,6 +1817,8 @@
 		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
 		ti,bit-shift = <24>;
 		reg = <0x1868>;
+		assigned-clocks = <&mcasp3_ahclkx_mux>;
+		assigned-clock-parents = <&abe_24m_fclk>;
 	};
 
 	mcasp3_aux_gfclk_mux: mcasp3_aux_gfclk_mux@1868 {
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 26c20e1167b9..4acd32a1c4ef 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -144,15 +144,6 @@
 		io-channel-names = "temp", "bsi", "vbat";
 	};
 
-	rear_camera: camera@0 {
-		compatible = "linux,camera";
-
-		module {
-			model = "TCM8341MD";
-			sensor = <&cam1>;
-		};
-	};
-
 	pwm9: dmtimer-pwm {
 		compatible = "ti,omap-dmtimer-pwm";
 		#pwm-cells = <3>;
@@ -189,10 +180,8 @@
 				clock-lanes = <1>;
 				data-lanes = <0>;
 				lane-polarity = <0 0>;
-				clock-inv = <0>;
 				/* Select strobe = <1> for back camera, <0> for front camera */
 				strobe = <1>;
-				crc = <0>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index 97b1c2321ba9..293ecb957227 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -47,6 +47,7 @@
 
 /dts-v1/;
 #include "stm32f429.dtsi"
+#include "stm32f429-pinctrl.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
 
@@ -202,10 +203,8 @@
 	stmpe1600: stmpe1600@42 {
 		compatible = "st,stmpe1600";
 		reg = <0x42>;
-		irq-gpio = <&gpioi 8 0>;
-		irq-trigger = <3>;
 		interrupts = <8 3>;
-		interrupt-parent = <&exti>;
+		interrupt-parent = <&gpioi>;
 		interrupt-controller;
 		wakeup-source;
 
diff --git a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
new file mode 100644
index 000000000000..7f3560c0211d
--- /dev/null
+++ b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
@@ -0,0 +1,343 @@
+/*
+ * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
+#include <dt-bindings/mfd/stm32f4-rcc.h>
+
+/ {
+	soc {
+		pinctrl: pin-controller {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x40020000 0x3000>;
+			interrupt-parent = <&exti>;
+			st,syscfg = <&syscfg 0x8>;
+			pins-are-numbered;
+
+			gpioa: gpio@40020000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>;
+				st,bank-name = "GPIOA";
+			};
+
+			gpiob: gpio@40020400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x400 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOB)>;
+				st,bank-name = "GPIOB";
+			};
+
+			gpioc: gpio@40020800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x800 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOC)>;
+				st,bank-name = "GPIOC";
+			};
+
+			gpiod: gpio@40020c00 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0xc00 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOD)>;
+				st,bank-name = "GPIOD";
+			};
+
+			gpioe: gpio@40021000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOE)>;
+				st,bank-name = "GPIOE";
+			};
+
+			gpiof: gpio@40021400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1400 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOF)>;
+				st,bank-name = "GPIOF";
+			};
+
+			gpiog: gpio@40021800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1800 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOG)>;
+				st,bank-name = "GPIOG";
+			};
+
+			gpioh: gpio@40021c00 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1c00 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOH)>;
+				st,bank-name = "GPIOH";
+			};
+
+			gpioi: gpio@40022000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOI)>;
+				st,bank-name = "GPIOI";
+			};
+
+			gpioj: gpio@40022400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2400 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOJ)>;
+				st,bank-name = "GPIOJ";
+			};
+
+			gpiok: gpio@40022800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2800 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOK)>;
+				st,bank-name = "GPIOK";
+			};
+
+			usart1_pins_a: usart1@0 {
+				pins1 {
+					pinmux = <STM32F429_PA9_FUNC_USART1_TX>;
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins2 {
+					pinmux = <STM32F429_PA10_FUNC_USART1_RX>;
+					bias-disable;
+				};
+			};
+
+			usart3_pins_a: usart3@0 {
+				pins1 {
+					pinmux = <STM32F429_PB10_FUNC_USART3_TX>;
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins2 {
+					pinmux = <STM32F429_PB11_FUNC_USART3_RX>;
+					bias-disable;
+				};
+			};
+
+			usbotg_fs_pins_a: usbotg_fs@0 {
+				pins {
+					pinmux = <STM32F429_PA10_FUNC_OTG_FS_ID>,
+						 <STM32F429_PA11_FUNC_OTG_FS_DM>,
+						 <STM32F429_PA12_FUNC_OTG_FS_DP>;
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			usbotg_fs_pins_b: usbotg_fs@1 {
+				pins {
+					pinmux = <STM32F429_PB12_FUNC_OTG_HS_ID>,
+						 <STM32F429_PB14_FUNC_OTG_HS_DM>,
+						 <STM32F429_PB15_FUNC_OTG_HS_DP>;
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			usbotg_hs_pins_a: usbotg_hs@0 {
+				pins {
+					pinmux = <STM32F429_PH4_FUNC_OTG_HS_ULPI_NXT>,
+						 <STM32F429_PI11_FUNC_OTG_HS_ULPI_DIR>,
+						 <STM32F429_PC0_FUNC_OTG_HS_ULPI_STP>,
+						 <STM32F429_PA5_FUNC_OTG_HS_ULPI_CK>,
+						 <STM32F429_PA3_FUNC_OTG_HS_ULPI_D0>,
+						 <STM32F429_PB0_FUNC_OTG_HS_ULPI_D1>,
+						 <STM32F429_PB1_FUNC_OTG_HS_ULPI_D2>,
+						 <STM32F429_PB10_FUNC_OTG_HS_ULPI_D3>,
+						 <STM32F429_PB11_FUNC_OTG_HS_ULPI_D4>,
+						 <STM32F429_PB12_FUNC_OTG_HS_ULPI_D5>,
+						 <STM32F429_PB13_FUNC_OTG_HS_ULPI_D6>,
+						 <STM32F429_PB5_FUNC_OTG_HS_ULPI_D7>;
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			ethernet_mii: mii@0 {
+				pins {
+					pinmux = <STM32F429_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>,
+						 <STM32F429_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>,
+						 <STM32F429_PC2_FUNC_ETH_MII_TXD2>,
+						 <STM32F429_PB8_FUNC_ETH_MII_TXD3>,
+						 <STM32F429_PC3_FUNC_ETH_MII_TX_CLK>,
+						 <STM32F429_PG11_FUNC_ETH_MII_TX_EN_ETH_RMII_TX_EN>,
+						 <STM32F429_PA2_FUNC_ETH_MDIO>,
+						 <STM32F429_PC1_FUNC_ETH_MDC>,
+						 <STM32F429_PA1_FUNC_ETH_MII_RX_CLK_ETH_RMII_REF_CLK>,
+						 <STM32F429_PA7_FUNC_ETH_MII_RX_DV_ETH_RMII_CRS_DV>,
+						 <STM32F429_PC4_FUNC_ETH_MII_RXD0_ETH_RMII_RXD0>,
+						 <STM32F429_PC5_FUNC_ETH_MII_RXD1_ETH_RMII_RXD1>,
+						 <STM32F429_PH6_FUNC_ETH_MII_RXD2>,
+						 <STM32F429_PH7_FUNC_ETH_MII_RXD3>;
+					slew-rate = <2>;
+				};
+			};
+
+			adc3_in8_pin: adc@200 {
+				pins {
+					pinmux = <STM32F429_PF10_FUNC_ANALOG>;
+				};
+			};
+
+			pwm1_pins: pwm@1 {
+				pins {
+					pinmux = <STM32F429_PA8_FUNC_TIM1_CH1>,
+						 <STM32F429_PB13_FUNC_TIM1_CH1N>,
+						 <STM32F429_PB12_FUNC_TIM1_BKIN>;
+				};
+			};
+
+			pwm3_pins: pwm@3 {
+				pins {
+					pinmux = <STM32F429_PB4_FUNC_TIM3_CH1>,
+						 <STM32F429_PB5_FUNC_TIM3_CH2>;
+				};
+			};
+
+			i2c1_pins: i2c1@0 {
+				pins {
+					pinmux = <STM32F429_PB9_FUNC_I2C1_SDA>,
+						 <STM32F429_PB6_FUNC_I2C1_SCL>;
+					bias-disable;
+					drive-open-drain;
+					slew-rate = <3>;
+				};
+			};
+
+			ltdc_pins: ltdc@0 {
+				pins {
+					pinmux = <STM32F429_PI12_FUNC_LCD_HSYNC>,
+						 <STM32F429_PI13_FUNC_LCD_VSYNC>,
+						 <STM32F429_PI14_FUNC_LCD_CLK>,
+						 <STM32F429_PI15_FUNC_LCD_R0>,
+						 <STM32F429_PJ0_FUNC_LCD_R1>,
+						 <STM32F429_PJ1_FUNC_LCD_R2>,
+						 <STM32F429_PJ2_FUNC_LCD_R3>,
+						 <STM32F429_PJ3_FUNC_LCD_R4>,
+						 <STM32F429_PJ4_FUNC_LCD_R5>,
+						 <STM32F429_PJ5_FUNC_LCD_R6>,
+						 <STM32F429_PJ6_FUNC_LCD_R7>,
+						 <STM32F429_PJ7_FUNC_LCD_G0>,
+						 <STM32F429_PJ8_FUNC_LCD_G1>,
+						 <STM32F429_PJ9_FUNC_LCD_G2>,
+						 <STM32F429_PJ10_FUNC_LCD_G3>,
+						 <STM32F429_PJ11_FUNC_LCD_G4>,
+						 <STM32F429_PJ12_FUNC_LCD_B0>,
+						 <STM32F429_PJ13_FUNC_LCD_B1>,
+						 <STM32F429_PJ14_FUNC_LCD_B2>,
+						 <STM32F429_PJ15_FUNC_LCD_B3>,
+						 <STM32F429_PK0_FUNC_LCD_G5>,
+						 <STM32F429_PK1_FUNC_LCD_G6>,
+						 <STM32F429_PK2_FUNC_LCD_G7>,
+						 <STM32F429_PK3_FUNC_LCD_B4>,
+						 <STM32F429_PK4_FUNC_LCD_B5>,
+						 <STM32F429_PK5_FUNC_LCD_B6>,
+						 <STM32F429_PK6_FUNC_LCD_B7>,
+						 <STM32F429_PK7_FUNC_LCD_DE>;
+					slew-rate = <2>;
+				};
+			};
+
+			dcmi_pins: dcmi@0 {
+				pins {
+					pinmux = <STM32F429_PA4_FUNC_DCMI_HSYNC>,
+						 <STM32F429_PB7_FUNC_DCMI_VSYNC>,
+						 <STM32F429_PA6_FUNC_DCMI_PIXCLK>,
+						 <STM32F429_PC6_FUNC_DCMI_D0>,
+						 <STM32F429_PC7_FUNC_DCMI_D1>,
+						 <STM32F429_PC8_FUNC_DCMI_D2>,
+						 <STM32F429_PC9_FUNC_DCMI_D3>,
+						 <STM32F429_PC11_FUNC_DCMI_D4>,
+						 <STM32F429_PD3_FUNC_DCMI_D5>,
+						 <STM32F429_PB8_FUNC_DCMI_D6>,
+						 <STM32F429_PE6_FUNC_DCMI_D7>,
+						 <STM32F429_PC10_FUNC_DCMI_D8>,
+						 <STM32F429_PC12_FUNC_DCMI_D9>,
+						 <STM32F429_PD6_FUNC_DCMI_D10>,
+						 <STM32F429_PD2_FUNC_DCMI_D11>;
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <3>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts
index c66d617e4245..5ceb2cf3777f 100644
--- a/arch/arm/boot/dts/stm32f429-disco.dts
+++ b/arch/arm/boot/dts/stm32f429-disco.dts
@@ -47,6 +47,7 @@
 
 /dts-v1/;
 #include "stm32f429.dtsi"
+#include "stm32f429-pinctrl.dtsi"
 #include <dt-bindings/input/input.h>
 
 / {
diff --git a/arch/arm/boot/dts/stm32f429-pinctrl.dtsi b/arch/arm/boot/dts/stm32f429-pinctrl.dtsi
new file mode 100644
index 000000000000..3e7a17d9112e
--- /dev/null
+++ b/arch/arm/boot/dts/stm32f429-pinctrl.dtsi
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "stm32f4-pinctrl.dtsi"
+
+/ {
+	soc {
+		pinctrl: pin-controller {
+			compatible = "st,stm32f429-pinctrl";
+
+			gpioa: gpio@40020000 {
+				gpio-ranges = <&pinctrl 0 0 16>;
+			};
+
+			gpiob: gpio@40020400 {
+				gpio-ranges = <&pinctrl 0 16 16>;
+			};
+
+			gpioc: gpio@40020800 {
+				gpio-ranges = <&pinctrl 0 32 16>;
+			};
+
+			gpiod: gpio@40020c00 {
+				gpio-ranges = <&pinctrl 0 48 16>;
+			};
+
+			gpioe: gpio@40021000 {
+				gpio-ranges = <&pinctrl 0 64 16>;
+			};
+
+			gpiof: gpio@40021400 {
+				gpio-ranges = <&pinctrl 0 80 16>;
+			};
+
+			gpiog: gpio@40021800 {
+				gpio-ranges = <&pinctrl 0 96 16>;
+			};
+
+			gpioh: gpio@40021c00 {
+				gpio-ranges = <&pinctrl 0 112 16>;
+			};
+
+			gpioi: gpio@40022000 {
+				gpio-ranges = <&pinctrl 0 128 16>;
+			};
+
+			gpioj: gpio@40022400 {
+				gpio-ranges = <&pinctrl 0 144 16>;
+			};
+
+			gpiok: gpio@40022800 {
+				gpio-ranges = <&pinctrl 0 160 8>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index dd7e99b1f43b..5b36eb114ddc 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -47,7 +47,6 @@
 
 #include "skeleton.dtsi"
 #include "armv7-m.dtsi"
-#include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
 #include <dt-bindings/clock/stm32fx-clock.h>
 #include <dt-bindings/mfd/stm32f4-rcc.h>
 
@@ -591,302 +590,6 @@
 			status = "disabled";
 		};
 
-		pinctrl: pin-controller {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "st,stm32f429-pinctrl";
-			ranges = <0 0x40020000 0x3000>;
-			interrupt-parent = <&exti>;
-			st,syscfg = <&syscfg 0x8>;
-			pins-are-numbered;
-
-			gpioa: gpio@40020000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x0 0x400>;
-				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>;
-				st,bank-name = "GPIOA";
-			};
-
-			gpiob: gpio@40020400 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x400 0x400>;
-				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOB)>;
-				st,bank-name = "GPIOB";
-			};
-
-			gpioc: gpio@40020800 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x800 0x400>;
-				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOC)>;
-				st,bank-name = "GPIOC";
-			};
-
-			gpiod: gpio@40020c00 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0xc00 0x400>;
-				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOD)>;
-				st,bank-name = "GPIOD";
-			};
-
-			gpioe: gpio@40021000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x1000 0x400>;
-				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOE)>;
-				st,bank-name = "GPIOE";
-			};
-
-			gpiof: gpio@40021400 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x1400 0x400>;
-				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOF)>;
-				st,bank-name = "GPIOF";
-			};
-
-			gpiog: gpio@40021800 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x1800 0x400>;
-				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOG)>;
-				st,bank-name = "GPIOG";
-			};
-
-			gpioh: gpio@40021c00 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x1c00 0x400>;
-				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOH)>;
-				st,bank-name = "GPIOH";
-			};
-
-			gpioi: gpio@40022000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x2000 0x400>;
-				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOI)>;
-				st,bank-name = "GPIOI";
-			};
-
-			gpioj: gpio@40022400 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x2400 0x400>;
-				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOJ)>;
-				st,bank-name = "GPIOJ";
-			};
-
-			gpiok: gpio@40022800 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x2800 0x400>;
-				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOK)>;
-				st,bank-name = "GPIOK";
-			};
-
-			usart1_pins_a: usart1@0 {
-				pins1 {
-					pinmux = <STM32F429_PA9_FUNC_USART1_TX>;
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <0>;
-				};
-				pins2 {
-					pinmux = <STM32F429_PA10_FUNC_USART1_RX>;
-					bias-disable;
-				};
-			};
-
-			usart3_pins_a: usart3@0 {
-				pins1 {
-					pinmux = <STM32F429_PB10_FUNC_USART3_TX>;
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <0>;
-				};
-				pins2 {
-					pinmux = <STM32F429_PB11_FUNC_USART3_RX>;
-					bias-disable;
-				};
-			};
-
-			usbotg_fs_pins_a: usbotg_fs@0 {
-				pins {
-					pinmux = <STM32F429_PA10_FUNC_OTG_FS_ID>,
-						 <STM32F429_PA11_FUNC_OTG_FS_DM>,
-						 <STM32F429_PA12_FUNC_OTG_FS_DP>;
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <2>;
-				};
-			};
-
-			usbotg_fs_pins_b: usbotg_fs@1 {
-				pins {
-					pinmux = <STM32F429_PB12_FUNC_OTG_HS_ID>,
-						 <STM32F429_PB14_FUNC_OTG_HS_DM>,
-						 <STM32F429_PB15_FUNC_OTG_HS_DP>;
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <2>;
-				};
-			};
-
-			usbotg_hs_pins_a: usbotg_hs@0 {
-				pins {
-					pinmux = <STM32F429_PH4_FUNC_OTG_HS_ULPI_NXT>,
-						 <STM32F429_PI11_FUNC_OTG_HS_ULPI_DIR>,
-						 <STM32F429_PC0_FUNC_OTG_HS_ULPI_STP>,
-						 <STM32F429_PA5_FUNC_OTG_HS_ULPI_CK>,
-						 <STM32F429_PA3_FUNC_OTG_HS_ULPI_D0>,
-						 <STM32F429_PB0_FUNC_OTG_HS_ULPI_D1>,
-						 <STM32F429_PB1_FUNC_OTG_HS_ULPI_D2>,
-						 <STM32F429_PB10_FUNC_OTG_HS_ULPI_D3>,
-						 <STM32F429_PB11_FUNC_OTG_HS_ULPI_D4>,
-						 <STM32F429_PB12_FUNC_OTG_HS_ULPI_D5>,
-						 <STM32F429_PB13_FUNC_OTG_HS_ULPI_D6>,
-						 <STM32F429_PB5_FUNC_OTG_HS_ULPI_D7>;
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <2>;
-				};
-			};
-
-			ethernet_mii: mii@0 {
-				pins {
-					pinmux = <STM32F429_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>,
-						 <STM32F429_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>,
-						 <STM32F429_PC2_FUNC_ETH_MII_TXD2>,
-						 <STM32F429_PB8_FUNC_ETH_MII_TXD3>,
-						 <STM32F429_PC3_FUNC_ETH_MII_TX_CLK>,
-						 <STM32F429_PG11_FUNC_ETH_MII_TX_EN_ETH_RMII_TX_EN>,
-						 <STM32F429_PA2_FUNC_ETH_MDIO>,
-						 <STM32F429_PC1_FUNC_ETH_MDC>,
-						 <STM32F429_PA1_FUNC_ETH_MII_RX_CLK_ETH_RMII_REF_CLK>,
-						 <STM32F429_PA7_FUNC_ETH_MII_RX_DV_ETH_RMII_CRS_DV>,
-						 <STM32F429_PC4_FUNC_ETH_MII_RXD0_ETH_RMII_RXD0>,
-						 <STM32F429_PC5_FUNC_ETH_MII_RXD1_ETH_RMII_RXD1>,
-						 <STM32F429_PH6_FUNC_ETH_MII_RXD2>,
-						 <STM32F429_PH7_FUNC_ETH_MII_RXD3>;
-					slew-rate = <2>;
-				};
-			};
-
-			adc3_in8_pin: adc@200 {
-				pins {
-					pinmux = <STM32F429_PF10_FUNC_ANALOG>;
-				};
-			};
-
-			pwm1_pins: pwm@1 {
-				pins {
-					pinmux = <STM32F429_PA8_FUNC_TIM1_CH1>,
-						 <STM32F429_PB13_FUNC_TIM1_CH1N>,
-						 <STM32F429_PB12_FUNC_TIM1_BKIN>;
-				};
-			};
-
-			pwm3_pins: pwm@3 {
-				pins {
-					pinmux = <STM32F429_PB4_FUNC_TIM3_CH1>,
-						 <STM32F429_PB5_FUNC_TIM3_CH2>;
-				};
-			};
-
-			i2c1_pins: i2c1@0 {
-				pins {
-					pinmux = <STM32F429_PB9_FUNC_I2C1_SDA>,
-						 <STM32F429_PB6_FUNC_I2C1_SCL>;
-					bias-disable;
-					drive-open-drain;
-					slew-rate = <3>;
-				};
-			};
-
-			ltdc_pins: ltdc@0 {
-				pins {
-					pinmux = <STM32F429_PI12_FUNC_LCD_HSYNC>,
-						 <STM32F429_PI13_FUNC_LCD_VSYNC>,
-						 <STM32F429_PI14_FUNC_LCD_CLK>,
-						 <STM32F429_PI15_FUNC_LCD_R0>,
-						 <STM32F429_PJ0_FUNC_LCD_R1>,
-						 <STM32F429_PJ1_FUNC_LCD_R2>,
-						 <STM32F429_PJ2_FUNC_LCD_R3>,
-						 <STM32F429_PJ3_FUNC_LCD_R4>,
-						 <STM32F429_PJ4_FUNC_LCD_R5>,
-						 <STM32F429_PJ5_FUNC_LCD_R6>,
-						 <STM32F429_PJ6_FUNC_LCD_R7>,
-						 <STM32F429_PJ7_FUNC_LCD_G0>,
-						 <STM32F429_PJ8_FUNC_LCD_G1>,
-						 <STM32F429_PJ9_FUNC_LCD_G2>,
-						 <STM32F429_PJ10_FUNC_LCD_G3>,
-						 <STM32F429_PJ11_FUNC_LCD_G4>,
-						 <STM32F429_PJ12_FUNC_LCD_B0>,
-						 <STM32F429_PJ13_FUNC_LCD_B1>,
-						 <STM32F429_PJ14_FUNC_LCD_B2>,
-						 <STM32F429_PJ15_FUNC_LCD_B3>,
-						 <STM32F429_PK0_FUNC_LCD_G5>,
-						 <STM32F429_PK1_FUNC_LCD_G6>,
-						 <STM32F429_PK2_FUNC_LCD_G7>,
-						 <STM32F429_PK3_FUNC_LCD_B4>,
-						 <STM32F429_PK4_FUNC_LCD_B5>,
-						 <STM32F429_PK5_FUNC_LCD_B6>,
-						 <STM32F429_PK6_FUNC_LCD_B7>,
-						 <STM32F429_PK7_FUNC_LCD_DE>;
-					slew-rate = <2>;
-				};
-			};
-
-			dcmi_pins: dcmi@0 {
-				pins {
-					pinmux = <STM32F429_PA4_FUNC_DCMI_HSYNC>,
-						 <STM32F429_PB7_FUNC_DCMI_VSYNC>,
-						 <STM32F429_PA6_FUNC_DCMI_PIXCLK>,
-						 <STM32F429_PC6_FUNC_DCMI_D0>,
-						 <STM32F429_PC7_FUNC_DCMI_D1>,
-						 <STM32F429_PC8_FUNC_DCMI_D2>,
-						 <STM32F429_PC9_FUNC_DCMI_D3>,
-						 <STM32F429_PC11_FUNC_DCMI_D4>,
-						 <STM32F429_PD3_FUNC_DCMI_D5>,
-						 <STM32F429_PB8_FUNC_DCMI_D6>,
-						 <STM32F429_PE6_FUNC_DCMI_D7>,
-						 <STM32F429_PC10_FUNC_DCMI_D8>,
-						 <STM32F429_PC12_FUNC_DCMI_D9>,
-						 <STM32F429_PD6_FUNC_DCMI_D10>,
-						 <STM32F429_PD2_FUNC_DCMI_D11>;
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <3>;
-				};
-			};
-		};
-
 		crc: crc@40023000 {
 			compatible = "st,stm32f4-crc";
 			reg = <0x40023000 0x400>;
diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
index 6ae1f037f3f0..c18acbe4cf4e 100644
--- a/arch/arm/boot/dts/stm32f469-disco.dts
+++ b/arch/arm/boot/dts/stm32f469-disco.dts
@@ -47,6 +47,7 @@
 
 /dts-v1/;
 #include "stm32f429.dtsi"
+#include "stm32f469-pinctrl.dtsi"
 
 / {
 	model = "STMicroelectronics STM32F469i-DISCO board";
diff --git a/arch/arm/boot/dts/stm32f469-pinctrl.dtsi b/arch/arm/boot/dts/stm32f469-pinctrl.dtsi
new file mode 100644
index 000000000000..fff542662eea
--- /dev/null
+++ b/arch/arm/boot/dts/stm32f469-pinctrl.dtsi
@@ -0,0 +1,96 @@
+/*
+ * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "stm32f4-pinctrl.dtsi"
+
+/ {
+	soc {
+		pinctrl: pin-controller {
+			compatible = "st,stm32f469-pinctrl";
+
+			gpioa: gpio@40020000 {
+				gpio-ranges = <&pinctrl 0 0 16>;
+			};
+
+			gpiob: gpio@40020400 {
+				gpio-ranges = <&pinctrl 0 16 16>;
+			};
+
+			gpioc: gpio@40020800 {
+				gpio-ranges = <&pinctrl 0 32 16>;
+			};
+
+			gpiod: gpio@40020c00 {
+				gpio-ranges = <&pinctrl 0 48 16>;
+			};
+
+			gpioe: gpio@40021000 {
+				gpio-ranges = <&pinctrl 0 64 16>;
+			};
+
+			gpiof: gpio@40021400 {
+				gpio-ranges = <&pinctrl 0 80 16>;
+			};
+
+			gpiog: gpio@40021800 {
+				gpio-ranges = <&pinctrl 0 96 16>;
+			};
+
+			gpioh: gpio@40021c00 {
+				gpio-ranges = <&pinctrl 0 112 16>;
+			};
+
+			gpioi: gpio@40022000 {
+				gpio-ranges = <&pinctrl 0 128 16>;
+			};
+
+			gpioj: gpio@40022400 {
+				gpio-ranges = <&pinctrl 0 144 6>,
+					      <&pinctrl 12 156 4>;
+			};
+
+			gpiok: gpio@40022800 {
+				gpio-ranges = <&pinctrl 3 163 5>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/configs/gemini_defconfig b/arch/arm/configs/gemini_defconfig
index d2d75fa664a6..2a63fa10c813 100644
--- a/arch/arm/configs/gemini_defconfig
+++ b/arch/arm/configs/gemini_defconfig
@@ -32,6 +32,7 @@ CONFIG_BLK_DEV_RAM_SIZE=16384
 CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_ATA=y
+CONFIG_PATA_FTIDE010=y
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
@@ -55,8 +56,8 @@ CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_GEMINI=y
 CONFIG_DMADEVICES=y
+CONFIG_AMBA_PL08X=y
 # CONFIG_DNOTIFY is not set
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig
index 64e3a2a8cede..d5e1370ec303 100644
--- a/arch/arm/configs/pxa_defconfig
+++ b/arch/arm/configs/pxa_defconfig
@@ -471,7 +471,7 @@ CONFIG_LCD_PLATFORM=m
 CONFIG_LCD_TOSA=m
 CONFIG_BACKLIGHT_PWM=m
 CONFIG_BACKLIGHT_TOSA=m
-CONFIG_FRAMEBUFFER_CONSOLE=m
+CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_LOGO=y
 CONFIG_SOUND=m
diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig
index 44d4fa57ba0a..070e5074f1ee 100644
--- a/arch/arm/configs/viper_defconfig
+++ b/arch/arm/configs/viper_defconfig
@@ -113,7 +113,7 @@ CONFIG_FB_PXA_PARAMETERS=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_BACKLIGHT_PWM=m
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=m
+CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 CONFIG_SOUND=m
 CONFIG_SND=m
diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig
index 8d4c0c926c34..09e7050d5653 100644
--- a/arch/arm/configs/zeus_defconfig
+++ b/arch/arm/configs/zeus_defconfig
@@ -112,7 +112,7 @@ CONFIG_FB_PXA=m
 CONFIG_FB_PXA_PARAMETERS=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=m
+CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 CONFIG_SOUND=m
 CONFIG_SND=m
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 5036f996e694..849014c01cf4 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -533,8 +533,8 @@ static void __init at91_pm_backup_init(void)
 	}
 
 	pm_bu->suspended = 0;
-	pm_bu->canary = virt_to_phys(&canary);
-	pm_bu->resume = virt_to_phys(cpu_resume);
+	pm_bu->canary = __pa_symbol(&canary);
+	pm_bu->resume = __pa_symbol(cpu_resume);
 
 	return;
 
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index 5b614388d72f..6d28aa20a7d3 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -58,10 +58,10 @@ void omap_hsmmc_late_init(struct omap2_hsmmc_info *c)
 	struct platform_device *pdev;
 	int res;
 
-	if (omap_hsmmc_done != 1)
+	if (omap_hsmmc_done)
 		return;
 
-	omap_hsmmc_done++;
+	omap_hsmmc_done = 1;
 
 	for (; c->mmc; c++) {
 		pdev = c->pdev;
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index f040244c57e7..2f4f7002f38d 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -839,6 +839,7 @@ static struct omap_hwmod dra7xx_gpio1_hwmod = {
 	.name		= "gpio1",
 	.class		= &dra7xx_gpio_hwmod_class,
 	.clkdm_name	= "wkupaon_clkdm",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.main_clk	= "wkupaon_iclk_mux",
 	.prcm = {
 		.omap4 = {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
index c89010e56488..4157987f4a3d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
@@ -168,7 +168,8 @@
 &sd_emmc_a {
 	status = "okay";
 	pinctrl-0 = <&sdio_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 	#address-cells = <1>;
 	#size-cells = <0>;
 
@@ -194,7 +195,8 @@
 &sd_emmc_b {
 	status = "okay";
 	pinctrl-0 = <&sdcard_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <4>;
 	cap-sd-highspeed;
@@ -212,10 +214,10 @@
 &sd_emmc_c {
 	status = "okay";
 	pinctrl-0 = <&emmc_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <8>;
-	cap-sd-highspeed;
 	cap-mmc-highspeed;
 	max-frequency = <200000000>;
 	non-removable;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
index 9697a7a79464..4b17a76959b2 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
@@ -107,6 +107,9 @@
 
 		states = <3300000 0>,
 		         <1800000 1>;
+
+		regulator-settling-time-up-us = <100>;
+		regulator-settling-time-down-us = <5000>;
 	};
 
 	wifi_32k: wifi-32k {
@@ -250,7 +253,8 @@
 &sd_emmc_a {
 	status = "okay";
 	pinctrl-0 = <&sdio_pins>, <&sdio_irq_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 	#address-cells = <1>;
 	#size-cells = <0>;
 
@@ -276,11 +280,16 @@
 &sd_emmc_b {
 	status = "okay";
 	pinctrl-0 = <&sdcard_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <4>;
 	cap-sd-highspeed;
-	max-frequency = <100000000>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	max-frequency = <200000000>;
 	disable-wp;
 
 	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
@@ -294,10 +303,10 @@
 &sd_emmc_c {
 	status = "disabled";
 	pinctrl-0 = <&emmc_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <8>;
-	cap-sd-highspeed;
 	max-frequency = <200000000>;
 	non-removable;
 	disable-wp;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
index 9c59c3c6d1b6..38dfdde5c147 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
@@ -51,7 +51,7 @@
 / {
 	compatible = "nexbox,a95x", "amlogic,meson-gxbb";
 	model = "NEXBOX A95X";
-	
+
 	aliases {
 		serial0 = &uart_AO;
 	};
@@ -232,7 +232,8 @@
 &sd_emmc_a {
 	status = "okay";
 	pinctrl-0 = <&sdio_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 	#address-cells = <1>;
 	#size-cells = <0>;
 
@@ -253,7 +254,8 @@
 &sd_emmc_b {
 	status = "okay";
 	pinctrl-0 = <&sdcard_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <4>;
 	cap-sd-highspeed;
@@ -271,10 +273,10 @@
 &sd_emmc_c {
 	status = "okay";
 	pinctrl-0 = <&emmc_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <8>;
-	cap-sd-highspeed;
 	cap-mmc-highspeed;
 	max-frequency = <200000000>;
 	non-removable;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index d147c853ab05..1ffa1c238a72 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -50,7 +50,7 @@
 / {
 	compatible = "hardkernel,odroid-c2", "amlogic,meson-gxbb";
 	model = "Hardkernel ODROID-C2";
-	
+
 	aliases {
 		serial0 = &uart_AO;
 	};
@@ -253,7 +253,8 @@
 &sd_emmc_b {
 	status = "okay";
 	pinctrl-0 = <&sdcard_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <4>;
 	cap-sd-highspeed;
@@ -271,10 +272,10 @@
 &sd_emmc_c {
 	status = "okay";
 	pinctrl-0 = <&emmc_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <8>;
-	cap-sd-highspeed;
 	max-frequency = <200000000>;
 	non-removable;
 	disable-wp;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
index 81ffc689a5bf..23c08c3afd0a 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
@@ -194,7 +194,8 @@
 &sd_emmc_a {
 	status = "okay";
 	pinctrl-0 = <&sdio_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 	#address-cells = <1>;
 	#size-cells = <0>;
 
@@ -220,10 +221,14 @@
 &sd_emmc_b {
 	status = "okay";
 	pinctrl-0 = <&sdcard_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <4>;
 	cap-sd-highspeed;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
 	max-frequency = <100000000>;
 	disable-wp;
 
@@ -238,10 +243,10 @@
 &sd_emmc_c {
 	status = "okay";
 	pinctrl-0 = <&emmc_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <8>;
-	cap-sd-highspeed;
 	cap-mmc-highspeed;
 	max-frequency = <200000000>;
 	non-removable;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index 346753fb6324..f2bc6dea1fc6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -155,7 +155,8 @@
 &sd_emmc_a {
 	status = "okay";
 	pinctrl-0 = <&sdio_pins &sdio_irq_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 	#address-cells = <1>;
 	#size-cells = <0>;
 
@@ -181,7 +182,8 @@
 &sd_emmc_b {
 	status = "okay";
 	pinctrl-0 = <&sdcard_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <4>;
 	cap-sd-highspeed;
@@ -198,10 +200,10 @@
 &sd_emmc_c {
 	status = "okay";
 	pinctrl-0 = <&emmc_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <8>;
-	cap-sd-highspeed;
 	cap-mmc-highspeed;
 	max-frequency = <200000000>;
 	non-removable;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 52f1687e7a09..af834cdbba79 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -392,6 +392,17 @@
 			};
 		};
 
+		emmc_clk_gate_pins: emmc_clk_gate {
+			mux {
+				groups = "BOOT_8";
+				function = "gpio_periphs";
+			};
+			cfg-pull-down {
+				pins = "BOOT_8";
+				bias-pull-down;
+			};
+		};
+
 		nor_pins: nor {
 			mux {
 				groups = "nor_d",
@@ -430,6 +441,17 @@
 			};
 		};
 
+		sdcard_clk_gate_pins: sdcard_clk_gate {
+			mux {
+				groups = "CARD_2";
+				function = "gpio_periphs";
+			};
+			cfg-pull-down {
+				pins = "CARD_2";
+				bias-pull-down;
+			};
+		};
+
 		sdio_pins: sdio {
 			mux {
 				groups = "sdio_d0",
@@ -442,6 +464,17 @@
 			};
 		};
 
+		sdio_clk_gate_pins: sdio_clk_gate {
+			mux {
+				groups = "GPIOX_4";
+				function = "gpio_periphs";
+			};
+			cfg-pull-down {
+				pins = "GPIOX_4";
+				bias-pull-down;
+			};
+		};
+
 		sdio_irq_pins: sdio_irq {
 			mux {
 				groups = "sdio_irq";
@@ -661,21 +694,21 @@
 
 &sd_emmc_a {
 	clocks = <&clkc CLKID_SD_EMMC_A>,
-		 <&xtal>,
+		 <&clkc CLKID_SD_EMMC_A_CLK0>,
 		 <&clkc CLKID_FCLK_DIV2>;
 	clock-names = "core", "clkin0", "clkin1";
 };
 
 &sd_emmc_b {
 	clocks = <&clkc CLKID_SD_EMMC_B>,
-		 <&xtal>,
+		 <&clkc CLKID_SD_EMMC_B_CLK0>,
 		 <&clkc CLKID_FCLK_DIV2>;
 	clock-names = "core", "clkin0", "clkin1";
 };
 
 &sd_emmc_c {
 	clocks = <&clkc CLKID_SD_EMMC_C>,
-		 <&xtal>,
+		 <&clkc CLKID_SD_EMMC_C_CLK0>,
 		 <&clkc CLKID_FCLK_DIV2>;
 	clock-names = "core", "clkin0", "clkin1";
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
index 2a5804ce7f4b..977b4240f3c1 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
@@ -123,7 +123,8 @@
 &sd_emmc_b {
 	status = "okay";
 	pinctrl-0 = <&sdcard_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <4>;
 	cap-sd-highspeed;
@@ -141,10 +142,10 @@
 &sd_emmc_c {
 	status = "okay";
 	pinctrl-0 = <&emmc_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <8>;
-	cap-sd-highspeed;
 	cap-mmc-highspeed;
 	max-frequency = <100000000>;
 	non-removable;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
index 69ca14ac10fa..64c54c92e214 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
@@ -91,6 +91,9 @@
 
 		states = <3300000 0>,
 			 <1800000 1>;
+
+		regulator-settling-time-up-us = <200>;
+		regulator-settling-time-down-us = <50000>;
 	};
 
 	vddio_boot: regulator-vddio_boot {
@@ -197,10 +200,14 @@
 &sd_emmc_b {
 	status = "okay";
 	pinctrl-0 = <&sdcard_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <4>;
 	cap-sd-highspeed;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
 	max-frequency = <100000000>;
 	disable-wp;
 
@@ -215,10 +222,12 @@
 &sd_emmc_c {
 	status = "okay";
 	pinctrl-0 = <&emmc_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <8>;
 	cap-mmc-highspeed;
+	mmc-ddr-3_3v;
 	max-frequency = <50000000>;
 	non-removable;
 	disable-wp;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
index 4c2ac7650fcd..1b8f32867aa1 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
@@ -189,7 +189,8 @@
 &sd_emmc_a {
 	status = "okay";
 	pinctrl-0 = <&sdio_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 	#address-cells = <1>;
 	#size-cells = <0>;
 
@@ -210,7 +211,8 @@
 &sd_emmc_b {
 	status = "okay";
 	pinctrl-0 = <&sdcard_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <4>;
 	cap-sd-highspeed;
@@ -228,10 +230,10 @@
 &sd_emmc_c {
 	status = "okay";
 	pinctrl-0 = <&emmc_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <8>;
-	cap-sd-highspeed;
 	cap-mmc-highspeed;
 	max-frequency = <200000000>;
 	non-removable;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
index f3eea8e89d12..129af9068814 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
@@ -95,7 +95,8 @@
 &sd_emmc_a {
 	status = "okay";
 	pinctrl-0 = <&sdio_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 	#address-cells = <1>;
 	#size-cells = <0>;
 
@@ -116,7 +117,8 @@
 &sd_emmc_b {
 	status = "okay";
 	pinctrl-0 = <&sdcard_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <4>;
 	cap-sd-highspeed;
@@ -134,10 +136,10 @@
 &sd_emmc_c {
 	status = "okay";
 	pinctrl-0 = <&emmc_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <8>;
-	cap-sd-highspeed;
 	cap-mmc-highspeed;
 	max-frequency = <200000000>;
 	non-removable;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index d6876e64979e..d8dd3298b15c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -281,6 +281,17 @@
 			};
 		};
 
+		emmc_clk_gate_pins: emmc_clk_gate {
+			mux {
+				groups = "BOOT_8";
+				function = "gpio_periphs";
+			};
+			cfg-pull-down {
+				pins = "BOOT_8";
+				bias-pull-down;
+			};
+		};
+
 		nor_pins: nor {
 			mux {
 				groups = "nor_d",
@@ -319,6 +330,17 @@
 			};
 		};
 
+		sdcard_clk_gate_pins: sdcard_clk_gate {
+			mux {
+				groups = "CARD_2";
+				function = "gpio_periphs";
+			};
+			cfg-pull-down {
+				pins = "CARD_2";
+				bias-pull-down;
+			};
+		};
+
 		sdio_pins: sdio {
 			mux {
 				groups = "sdio_d0",
@@ -331,6 +353,17 @@
 			};
 		};
 
+		sdio_clk_gate_pins: sdio_clk_gate {
+			mux {
+				groups = "GPIOX_4";
+				function = "gpio_periphs";
+			};
+			cfg-pull-down {
+				pins = "GPIOX_4";
+				bias-pull-down;
+			};
+		};
+
 		sdio_irq_pins: sdio_irq {
 			mux {
 				groups = "sdio_irq";
@@ -603,21 +636,21 @@
 
 &sd_emmc_a {
 	clocks = <&clkc CLKID_SD_EMMC_A>,
-		 <&xtal>,
+		 <&clkc CLKID_SD_EMMC_A_CLK0>,
 		 <&clkc CLKID_FCLK_DIV2>;
 	clock-names = "core", "clkin0", "clkin1";
 };
 
 &sd_emmc_b {
 	clocks = <&clkc CLKID_SD_EMMC_B>,
-		 <&xtal>,
+		 <&clkc CLKID_SD_EMMC_B_CLK0>,
 		 <&clkc CLKID_FCLK_DIV2>;
        clock-names = "core", "clkin0", "clkin1";
 };
 
 &sd_emmc_c {
 	clocks = <&clkc CLKID_SD_EMMC_C>,
-		 <&xtal>,
+		 <&clkc CLKID_SD_EMMC_C_CLK0>,
 		 <&clkc CLKID_FCLK_DIV2>;
 	clock-names = "core", "clkin0", "clkin1";
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
index 9b10c5f4f8c0..22c697732f66 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
@@ -175,7 +175,8 @@
 &sd_emmc_b {
 	status = "okay";
 	pinctrl-0 = <&sdcard_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <4>;
 	cap-sd-highspeed;
@@ -193,10 +194,10 @@
 &sd_emmc_c {
 	status = "okay";
 	pinctrl-0 = <&emmc_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <8>;
-	cap-sd-highspeed;
 	cap-mmc-highspeed;
 	max-frequency = <200000000>;
 	non-removable;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
index 08f1dd69b679..470f72bb863c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
@@ -220,7 +220,6 @@
 	pinctrl-names = "default";
 
 	bus-width = <8>;
-	cap-sd-highspeed;
 	cap-mmc-highspeed;
 	max-frequency = <200000000>;
 	non-removable;
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
index 4d360713ed12..30d48ecf46e0 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
@@ -254,7 +254,7 @@
 
 			ap_syscon: system-controller@6f4000 {
 				compatible = "syscon", "simple-mfd";
-				reg = <0x6f4000 0x1000>;
+				reg = <0x6f4000 0x2000>;
 
 				ap_clk: clock {
 					compatible = "marvell,ap806-clock";
@@ -265,7 +265,7 @@
 					compatible = "marvell,ap806-pinctrl";
 				};
 
-				ap_gpio: gpio {
+				ap_gpio: gpio@1040 {
 					compatible = "marvell,armada-8k-gpio";
 					offset = <0x1040>;
 					ngpios = <20>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
index e0518b4bc6c2..19fbaa5e7bdd 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
@@ -113,8 +113,7 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
-			clocks = <&cru ARMCLKL>;
-			operating-points-v2 = <&cluster0_opp>;
+
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
@@ -123,8 +122,6 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
-			clocks = <&cru ARMCLKL>;
-			operating-points-v2 = <&cluster0_opp>;
 		};
 
 		cpu_l2: cpu@2 {
@@ -132,8 +129,6 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
-			clocks = <&cru ARMCLKL>;
-			operating-points-v2 = <&cluster0_opp>;
 		};
 
 		cpu_l3: cpu@3 {
@@ -141,8 +136,6 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
-			clocks = <&cru ARMCLKL>;
-			operating-points-v2 = <&cluster0_opp>;
 		};
 
 		cpu_b0: cpu@100 {
@@ -150,8 +143,7 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
-			clocks = <&cru ARMCLKB>;
-			operating-points-v2 = <&cluster1_opp>;
+
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
@@ -160,8 +152,6 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x101>;
 			enable-method = "psci";
-			clocks = <&cru ARMCLKB>;
-			operating-points-v2 = <&cluster1_opp>;
 		};
 
 		cpu_b2: cpu@102 {
@@ -169,8 +159,6 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x102>;
 			enable-method = "psci";
-			clocks = <&cru ARMCLKB>;
-			operating-points-v2 = <&cluster1_opp>;
 		};
 
 		cpu_b3: cpu@103 {
@@ -178,62 +166,6 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x103>;
 			enable-method = "psci";
-			clocks = <&cru ARMCLKB>;
-			operating-points-v2 = <&cluster1_opp>;
-		};
-	};
-
-	cluster0_opp: opp-table0 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp00 {
-			opp-hz = /bits/ 64 <312000000>;
-			opp-microvolt = <950000>;
-			clock-latency-ns = <40000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <408000000>;
-			opp-microvolt = <950000>;
-		};
-		opp02 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <950000>;
-		};
-		opp03 {
-			opp-hz = /bits/ 64 <816000000>;
-			opp-microvolt = <1025000>;
-		};
-		opp04 {
-			opp-hz = /bits/ 64 <1008000000>;
-			opp-microvolt = <1125000>;
-		};
-	};
-
-	cluster1_opp: opp-table1 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp00 {
-			opp-hz = /bits/ 64 <312000000>;
-			opp-microvolt = <950000>;
-			clock-latency-ns = <40000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <408000000>;
-			opp-microvolt = <950000>;
-		};
-		opp02 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <950000>;
-		};
-		opp03 {
-			opp-hz = /bits/ 64 <816000000>;
-			opp-microvolt = <975000>;
-		};
-		opp04 {
-			opp-hz = /bits/ 64 <1008000000>;
-			opp-microvolt = <1050000>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index d79e9b3265b9..ab7629c5b856 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1629,9 +1629,9 @@
 		compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi";
 		reg = <0x0 0xff960000 0x0 0x8000>;
 		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>;
-		clocks = <&cru SCLK_MIPIDPHY_REF>, <&cru PCLK_MIPI_DSI0>,
-			 <&cru SCLK_DPHY_TX0_CFG>;
-		clock-names = "ref", "pclk", "phy_cfg";
+		clocks = <&cru SCLK_DPHY_PLL>, <&cru PCLK_MIPI_DSI0>,
+			 <&cru SCLK_DPHY_TX0_CFG>, <&cru PCLK_VIO_GRF>;
+		clock-names = "ref", "pclk", "phy_cfg", "grf";
 		power-domains = <&power RK3399_PD_VIO>;
 		rockchip,grf = <&grf>;
 		status = "disabled";