Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6: (25 commits)
  avr32: Add hardware power-down function call
  avr32: add include/asm-avr32/serial.h
  avr32: don't offer PARPORT_PC
  avr32: don't offer CONFIG_GEN_RTC
  avr32: don't offer CONFIG_RTC
  add include/asm-avr32/xor.h
  avr32: Remove two unused #defines from mm/init.c
  avr32: Implement set_rate(), set_parent() and mode() for pll1
  avr32: Generic clockevents support
  avr32: Move sleep code into mach-at32ap
  avr32: Use constants from sysreg.h in asm.h
  avr32: Delete mostly unused header asm/intc.h
  avr32: start clocksource cleanup
  avr32: pass i2c board info through at32_add_device_twi
  avr32: cleanup - use _AC macro to define PAGE_SIZE
  Generate raw keyboard codes for AVR32 architecture
  atmel_usba_udc: Add support for AT91CAP9 UDPHS
  atmel_usba_udc: Add missing kfree() in usba_udc_remove()
  atmel_usba_udc: move endpoint declarations into platform data.
  atmel_usba_udc: Kill GPIO_PIN_NONE
  ...

11 files changed, 385 insertions, 429 deletions

diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index 28e0caf4156c..09ad7995080c 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -47,6 +47,9 @@ config RWSEM_GENERIC_SPINLOCK
 config GENERIC_TIME
 	def_bool y
 
+config GENERIC_CLOCKEVENTS
+	def_bool y
+
 config RWSEM_XCHGADD_ALGORITHM
 	def_bool n
 
@@ -70,6 +73,8 @@ source "init/Kconfig"
 
 menu "System Type and features"
 
+source "kernel/time/Kconfig"
+
 config SUBARCH_AVR32B
 	bool
 config MMU
diff --git a/arch/avr32/kernel/entry-avr32b.S b/arch/avr32/kernel/entry-avr32b.S
index 8cf16d7a7040..5f31702d6b1c 100644
--- a/arch/avr32/kernel/entry-avr32b.S
+++ b/arch/avr32/kernel/entry-avr32b.S
@@ -741,26 +741,6 @@ irq_level\level:
 
 	.section .irq.text,"ax",@progbits
 
-.global cpu_idle_sleep
-cpu_idle_sleep:
-	mask_interrupts
-	get_thread_info r8
-	ld.w	r9, r8[TI_flags]
-	bld	r9, TIF_NEED_RESCHED
-	brcs	cpu_idle_enable_int_and_exit
-	sbr	r9, TIF_CPU_GOING_TO_SLEEP
-	st.w	r8[TI_flags], r9
-	unmask_interrupts
-	sleep 0
-cpu_idle_skip_sleep:
-	mask_interrupts
-	ld.w	r9, r8[TI_flags]
-	cbr	r9, TIF_CPU_GOING_TO_SLEEP
-	st.w	r8[TI_flags], r9
-cpu_idle_enable_int_and_exit:
-	unmask_interrupts
-	retal	r12
-
 	.global	irq_level0
 	.global	irq_level1
 	.global	irq_level2
diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c
index 7f4af0b1e111..6cf9df176274 100644
--- a/arch/avr32/kernel/process.c
+++ b/arch/avr32/kernel/process.c
@@ -18,11 +18,11 @@
 #include <asm/sysreg.h>
 #include <asm/ocd.h>
 
+#include <asm/arch/pm.h>
+
 void (*pm_power_off)(void) = NULL;
 EXPORT_SYMBOL(pm_power_off);
 
-extern void cpu_idle_sleep(void);
-
 /*
  * This file handles the architecture-dependent parts of process handling..
  */
@@ -54,6 +54,8 @@ void machine_halt(void)
 
 void machine_power_off(void)
 {
+	if (pm_power_off)
+		pm_power_off();
 }
 
 void machine_restart(char *cmd)
diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c
index 36a46c3ae308..00a9862380ff 100644
--- a/arch/avr32/kernel/time.c
+++ b/arch/avr32/kernel/time.c
@@ -1,16 +1,12 @@
 /*
  * Copyright (C) 2004-2007 Atmel Corporation
  *
- * Based on MIPS implementation arch/mips/kernel/time.c
- *   Copyright 2001 MontaVista Software Inc.
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
 #include <linux/clk.h>
-#include <linux/clocksource.h>
+#include <linux/clockchips.h>
 #include <linux/time.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
@@ -27,207 +23,133 @@
 #include <asm/io.h>
 #include <asm/sections.h>
 
-/* how many counter cycles in a jiffy? */
-static u32 cycles_per_jiffy;
+#include <asm/arch/pm.h>
 
-/* the count value for the next timer interrupt */
-static u32 expirelo;
 
-cycle_t __weak read_cycle_count(void)
+static cycle_t read_cycle_count(void)
 {
 	return (cycle_t)sysreg_read(COUNT);
 }
 
-struct clocksource __weak clocksource_avr32 = {
-	.name		= "avr32",
-	.rating		= 350,
+/*
+ * The architectural cycle count registers are a fine clocksource unless
+ * the system idle loop use sleep states like "idle":  the CPU cycles
+ * measured by COUNT (and COMPARE) don't happen during sleep states.
+ * Their duration also changes if cpufreq changes the CPU clock rate.
+ * So we rate the clocksource using COUNT as very low quality.
+ */
+static struct clocksource counter = {
+	.name		= "avr32_counter",
+	.rating		= 50,
 	.read		= read_cycle_count,
 	.mask		= CLOCKSOURCE_MASK(32),
 	.shift		= 16,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-irqreturn_t __weak timer_interrupt(int irq, void *dev_id);
-
-struct irqaction timer_irqaction = {
-	.handler	= timer_interrupt,
-	.flags		= IRQF_DISABLED,
-	.name		= "timer",
-};
-
-/*
- * By default we provide the null RTC ops
- */
-static unsigned long null_rtc_get_time(void)
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
 {
-	return mktime(2007, 1, 1, 0, 0, 0);
-}
-
-static int null_rtc_set_time(unsigned long sec)
-{
-	return 0;
-}
+	struct clock_event_device *evdev = dev_id;
 
-static unsigned long (*rtc_get_time)(void) = null_rtc_get_time;
-static int (*rtc_set_time)(unsigned long) = null_rtc_set_time;
-
-static void avr32_timer_ack(void)
-{
-	u32 count;
-
-	/* Ack this timer interrupt and set the next one */
-	expirelo += cycles_per_jiffy;
-	/* setting COMPARE to 0 stops the COUNT-COMPARE */
-	if (expirelo == 0) {
-		sysreg_write(COMPARE, expirelo + 1);
-	} else {
-		sysreg_write(COMPARE, expirelo);
-	}
+	/*
+	 * Disable the interrupt until the clockevent subsystem
+	 * reprograms it.
+	 */
+	sysreg_write(COMPARE, 0);
 
-	/* Check to see if we have missed any timer interrupts */
-	count = sysreg_read(COUNT);
-	if ((count - expirelo) < 0x7fffffff) {
-		expirelo = count + cycles_per_jiffy;
-		sysreg_write(COMPARE, expirelo);
-	}
+	evdev->event_handler(evdev);
+	return IRQ_HANDLED;
 }
 
-int __weak avr32_hpt_init(void)
-{
-	int ret;
-	unsigned long mult, shift, count_hz;
-
-	count_hz = clk_get_rate(boot_cpu_data.clk);
-	shift = clocksource_avr32.shift;
-	mult = clocksource_hz2mult(count_hz, shift);
-	clocksource_avr32.mult = mult;
-
-	{
-		u64 tmp;
-
-		tmp = TICK_NSEC;
-		tmp <<= shift;
-		tmp += mult / 2;
-		do_div(tmp, mult);
-
-		cycles_per_jiffy = tmp;
-	}
+static struct irqaction timer_irqaction = {
+	.handler	= timer_interrupt,
+	.flags		= IRQF_TIMER | IRQF_DISABLED,
+	.name		= "avr32_comparator",
+};
 
-	ret = setup_irq(0, &timer_irqaction);
-	if (ret) {
-		pr_debug("timer: could not request IRQ 0: %d\n", ret);
-		return -ENODEV;
-	}
+static int comparator_next_event(unsigned long delta,
+		struct clock_event_device *evdev)
+{
+	unsigned long	flags;
 
-	printk(KERN_INFO "timer: AT32AP COUNT-COMPARE at irq 0, "
-			"%lu.%03lu MHz\n",
-			((count_hz + 500) / 1000) / 1000,
-			((count_hz + 500) / 1000) % 1000);
+	raw_local_irq_save(flags);
 
-	return 0;
-}
+	/* The time to read COUNT then update COMPARE must be less
+	 * than the min_delta_ns value for this clockevent source.
+	 */
+	sysreg_write(COMPARE, (sysreg_read(COUNT) + delta) ? : 1);
 
-/*
- * Taken from MIPS c0_hpt_timer_init().
- *
- * The reason COUNT is written twice is probably to make sure we don't get any
- * timer interrupts while we are messing with the counter.
- */
-int __weak avr32_hpt_start(void)
-{
-	u32 count = sysreg_read(COUNT);
-	expirelo = (count / cycles_per_jiffy + 1) * cycles_per_jiffy;
-	sysreg_write(COUNT, expirelo - cycles_per_jiffy);
-	sysreg_write(COMPARE, expirelo);
-	sysreg_write(COUNT, count);
+	raw_local_irq_restore(flags);
 
 	return 0;
 }
 
-/*
- * local_timer_interrupt() does profiling and process accounting on a
- * per-CPU basis.
- *
- * In UP mode, it is invoked from the (global) timer_interrupt.
- */
-void local_timer_interrupt(int irq, void *dev_id)
+static void comparator_mode(enum clock_event_mode mode,
+		struct clock_event_device *evdev)
 {
-	if (current->pid)
-		profile_tick(CPU_PROFILING);
-	update_process_times(user_mode(get_irq_regs()));
+	switch (mode) {
+	case CLOCK_EVT_MODE_ONESHOT:
+		pr_debug("%s: start\n", evdev->name);
+		/* FALLTHROUGH */
+	case CLOCK_EVT_MODE_RESUME:
+		cpu_disable_idle_sleep();
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		sysreg_write(COMPARE, 0);
+		pr_debug("%s: stop\n", evdev->name);
+		cpu_enable_idle_sleep();
+		break;
+	default:
+		BUG();
+	}
 }
 
-irqreturn_t __weak timer_interrupt(int irq, void *dev_id)
-{
-	/* ack timer interrupt and try to set next interrupt */
-	avr32_timer_ack();
-
-	/*
-	 * Call the generic timer interrupt handler
-	 */
-	write_seqlock(&xtime_lock);
-	do_timer(1);
-	write_sequnlock(&xtime_lock);
-
-	/*
-	 * In UP mode, we call local_timer_interrupt() to do profiling
-	 * and process accounting.
-	 *
-	 * SMP is not supported yet.
-	 */
-	local_timer_interrupt(irq, dev_id);
-
-	return IRQ_HANDLED;
-}
+static struct clock_event_device comparator = {
+	.name		= "avr32_comparator",
+	.features	= CLOCK_EVT_FEAT_ONESHOT,
+	.shift		= 16,
+	.rating		= 50,
+	.cpumask	= CPU_MASK_CPU0,
+	.set_next_event	= comparator_next_event,
+	.set_mode	= comparator_mode,
+};
 
 void __init time_init(void)
 {
+	unsigned long counter_hz;
 	int ret;
 
-	/*
-	 * Make sure we don't get any COMPARE interrupts before we can
-	 * handle them.
-	 */
-	sysreg_write(COMPARE, 0);
-
-	xtime.tv_sec = rtc_get_time();
+	xtime.tv_sec = mktime(2007, 1, 1, 0, 0, 0);
 	xtime.tv_nsec = 0;
 
 	set_normalized_timespec(&wall_to_monotonic,
 				-xtime.tv_sec, -xtime.tv_nsec);
 
-	ret = avr32_hpt_init();
-	if (ret) {
-		pr_debug("timer: failed setup: %d\n", ret);
-		return;
-	}
+	/* figure rate for counter */
+	counter_hz = clk_get_rate(boot_cpu_data.clk);
+	counter.mult = clocksource_hz2mult(counter_hz, counter.shift);
 
-	ret = clocksource_register(&clocksource_avr32);
+	ret = clocksource_register(&counter);
 	if (ret)
 		pr_debug("timer: could not register clocksource: %d\n", ret);
 
-	ret = avr32_hpt_start();
-	if (ret) {
-		pr_debug("timer: failed starting: %d\n", ret);
-		return;
-	}
-}
+	/* setup COMPARE clockevent */
+	comparator.mult = div_sc(counter_hz, NSEC_PER_SEC, comparator.shift);
+	comparator.max_delta_ns = clockevent_delta2ns((u32)~0, &comparator);
+	comparator.min_delta_ns = clockevent_delta2ns(50, &comparator) + 1;
 
-static struct sysdev_class timer_class = {
-	.name = "timer",
-};
+	sysreg_write(COMPARE, 0);
+	timer_irqaction.dev_id = &comparator;
 
-static struct sys_device timer_device = {
-	.id	= 0,
-	.cls	= &timer_class,
-};
+	ret = setup_irq(0, &timer_irqaction);
+	if (ret)
+		pr_debug("timer: could not request IRQ 0: %d\n", ret);
+	else {
+		clockevents_register_device(&comparator);
 
-static int __init init_timer_sysfs(void)
-{
-	int err = sysdev_class_register(&timer_class);
-	if (!err)
-		err = sysdev_register(&timer_device);
-	return err;
+		pr_info("%s: irq 0, %lu.%03lu MHz\n", comparator.name,
+				((counter_hz + 500) / 1000) / 1000,
+				((counter_hz + 500) / 1000) % 1000);
+	}
 }
-
-device_initcall(init_timer_sysfs);
diff --git a/arch/avr32/mach-at32ap/Makefile b/arch/avr32/mach-at32ap/Makefile
index 5e9f8217befc..e89009439e4a 100644
--- a/arch/avr32/mach-at32ap/Makefile
+++ b/arch/avr32/mach-at32ap/Makefile
@@ -1,4 +1,3 @@
 obj-y				+= at32ap.o clock.o intc.o extint.o pio.o hsmc.o
-obj-$(CONFIG_CPU_AT32AP700X)	+= at32ap700x.o
-obj-$(CONFIG_CPU_AT32AP700X)	+= time-tc.o
+obj-$(CONFIG_CPU_AT32AP700X)	+= at32ap700x.o pm-at32ap700x.o
 obj-$(CONFIG_CPU_FREQ_AT32AP)	+= cpufreq.o
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 7678fee9a885..0f24b4f85c17 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -6,11 +6,13 @@
  * published by the Free Software Foundation.
  */
 #include <linux/clk.h>
+#include <linux/delay.h>
 #include <linux/fb.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/spi/spi.h>
+#include <linux/usb/atmel_usba_udc.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -98,6 +100,9 @@ unsigned long at32ap7000_osc_rates[3] = {
 	[2] = 12000000,
 };
 
+static struct clk osc0;
+static struct clk osc1;
+
 static unsigned long osc_get_rate(struct clk *clk)
 {
 	return at32ap7000_osc_rates[clk->index];
@@ -107,9 +112,6 @@ static unsigned long pll_get_rate(struct clk *clk, unsigned long control)
 {
 	unsigned long div, mul, rate;
 
-	if (!(control & PM_BIT(PLLEN)))
-		return 0;
-
 	div = PM_BFEXT(PLLDIV, control) + 1;
 	mul = PM_BFEXT(PLLMUL, control) + 1;
 
@@ -120,6 +122,71 @@ static unsigned long pll_get_rate(struct clk *clk, unsigned long control)
 	return rate;
 }
 
+static long pll_set_rate(struct clk *clk, unsigned long rate,
+			 u32 *pll_ctrl)
+{
+	unsigned long mul;
+	unsigned long mul_best_fit = 0;
+	unsigned long div;
+	unsigned long div_min;
+	unsigned long div_max;
+	unsigned long div_best_fit = 0;
+	unsigned long base;
+	unsigned long pll_in;
+	unsigned long actual = 0;
+	unsigned long rate_error;
+	unsigned long rate_error_prev = ~0UL;
+	u32 ctrl;
+
+	/* Rate must be between 80 MHz and 200 Mhz. */
+	if (rate < 80000000UL || rate > 200000000UL)
+		return -EINVAL;
+
+	ctrl = PM_BF(PLLOPT, 4);
+	base = clk->parent->get_rate(clk->parent);
+
+	/* PLL input frequency must be between 6 MHz and 32 MHz. */
+	div_min = DIV_ROUND_UP(base, 32000000UL);
+	div_max = base / 6000000UL;
+
+	if (div_max < div_min)
+		return -EINVAL;
+
+	for (div = div_min; div <= div_max; div++) {
+		pll_in = (base + div / 2) / div;
+		mul = (rate + pll_in / 2) / pll_in;
+
+		if (mul == 0)
+			continue;
+
+		actual = pll_in * mul;
+		rate_error = abs(actual - rate);
+
+		if (rate_error < rate_error_prev) {
+			mul_best_fit = mul;
+			div_best_fit = div;
+			rate_error_prev = rate_error;
+		}
+
+		if (rate_error == 0)
+			break;
+	}
+
+	if (div_best_fit == 0)
+		return -EINVAL;
+
+	ctrl |= PM_BF(PLLMUL, mul_best_fit - 1);
+	ctrl |= PM_BF(PLLDIV, div_best_fit - 1);
+	ctrl |= PM_BF(PLLCOUNT, 16);
+
+	if (clk->parent == &osc1)
+		ctrl |= PM_BIT(PLLOSC);
+
+	*pll_ctrl = ctrl;
+
+	return actual;
+}
+
 static unsigned long pll0_get_rate(struct clk *clk)
 {
 	u32 control;
@@ -129,6 +196,41 @@ static unsigned long pll0_get_rate(struct clk *clk)
 	return pll_get_rate(clk, control);
 }
 
+static void pll1_mode(struct clk *clk, int enabled)
+{
+	unsigned long timeout;
+	u32 status;
+	u32 ctrl;
+
+	ctrl = pm_readl(PLL1);
+
+	if (enabled) {
+		if (!PM_BFEXT(PLLMUL, ctrl) && !PM_BFEXT(PLLDIV, ctrl)) {
+			pr_debug("clk %s: failed to enable, rate not set\n",
+					clk->name);
+			return;
+		}
+
+		ctrl |= PM_BIT(PLLEN);
+		pm_writel(PLL1, ctrl);
+
+		/* Wait for PLL lock. */
+		for (timeout = 10000; timeout; timeout--) {
+			status = pm_readl(ISR);
+			if (status & PM_BIT(LOCK1))
+				break;
+			udelay(10);
+		}
+
+		if (!(status & PM_BIT(LOCK1)))
+			printk(KERN_ERR "clk %s: timeout waiting for lock\n",
+					clk->name);
+	} else {
+		ctrl &= ~PM_BIT(PLLEN);
+		pm_writel(PLL1, ctrl);
+	}
+}
+
 static unsigned long pll1_get_rate(struct clk *clk)
 {
 	u32 control;
@@ -138,6 +240,49 @@ static unsigned long pll1_get_rate(struct clk *clk)
 	return pll_get_rate(clk, control);
 }
 
+static long pll1_set_rate(struct clk *clk, unsigned long rate, int apply)
+{
+	u32 ctrl = 0;
+	unsigned long actual_rate;
+
+	actual_rate = pll_set_rate(clk, rate, &ctrl);
+
+	if (apply) {
+		if (actual_rate != rate)
+			return -EINVAL;
+		if (clk->users > 0)
+			return -EBUSY;
+		pr_debug(KERN_INFO "clk %s: new rate %lu (actual rate %lu)\n",
+				clk->name, rate, actual_rate);
+		pm_writel(PLL1, ctrl);
+	}
+
+	return actual_rate;
+}
+
+static int pll1_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 ctrl;
+
+	if (clk->users > 0)
+		return -EBUSY;
+
+	ctrl = pm_readl(PLL1);
+	WARN_ON(ctrl & PM_BIT(PLLEN));
+
+	if (parent == &osc0)
+		ctrl &= ~PM_BIT(PLLOSC);
+	else if (parent == &osc1)
+		ctrl |= PM_BIT(PLLOSC);
+	else
+		return -EINVAL;
+
+	pm_writel(PLL1, ctrl);
+	clk->parent = parent;
+
+	return 0;
+}
+
 /*
  * The AT32AP7000 has five primary clock sources: One 32kHz
  * oscillator, two crystal oscillators and two PLLs.
@@ -166,7 +311,10 @@ static struct clk pll0 = {
 };
 static struct clk pll1 = {
 	.name		= "pll1",
+	.mode		= pll1_mode,
 	.get_rate	= pll1_get_rate,
+	.set_rate	= pll1_set_rate,
+	.set_parent	= pll1_set_parent,
 	.parent		= &osc0,
 };
 
@@ -605,19 +753,32 @@ static inline void set_ebi_sfr_bits(u32 mask)
 }
 
 /* --------------------------------------------------------------------
- *  System Timer/Counter (TC)
+ *  Timer/Counter (TC)
  * -------------------------------------------------------------------- */
-static struct resource at32_systc0_resource[] = {
+
+static struct resource at32_tcb0_resource[] = {
 	PBMEM(0xfff00c00),
 	IRQ(22),
 };
-struct platform_device at32_systc0_device = {
-	.name		= "systc",
+static struct platform_device at32_tcb0_device = {
+	.name		= "atmel_tcb",
 	.id		= 0,
-	.resource	= at32_systc0_resource,
-	.num_resources	= ARRAY_SIZE(at32_systc0_resource),
+	.resource	= at32_tcb0_resource,
+	.num_resources	= ARRAY_SIZE(at32_tcb0_resource),
 };
-DEV_CLK(pclk, at32_systc0, pbb, 3);
+DEV_CLK(t0_clk, at32_tcb0, pbb, 3);
+
+static struct resource at32_tcb1_resource[] = {
+	PBMEM(0xfff01000),
+	IRQ(23),
+};
+static struct platform_device at32_tcb1_device = {
+	.name		= "atmel_tcb",
+	.id		= 1,
+	.resource	= at32_tcb1_resource,
+	.num_resources	= ARRAY_SIZE(at32_tcb1_resource),
+};
+DEV_CLK(t0_clk, at32_tcb1, pbb, 4);
 
 /* --------------------------------------------------------------------
  *  PIO
@@ -669,7 +830,8 @@ void __init at32_add_system_devices(void)
 	platform_device_register(&pdc_device);
 	platform_device_register(&dmaca0_device);
 
-	platform_device_register(&at32_systc0_device);
+	platform_device_register(&at32_tcb0_device);
+	platform_device_register(&at32_tcb1_device);
 
 	platform_device_register(&pio0_device);
 	platform_device_register(&pio1_device);
@@ -989,7 +1151,9 @@ static struct clk atmel_twi0_pclk = {
 	.index		= 2,
 };
 
-struct platform_device *__init at32_add_device_twi(unsigned int id)
+struct platform_device *__init at32_add_device_twi(unsigned int id,
+						    struct i2c_board_info *b,
+						    unsigned int n)
 {
 	struct platform_device *pdev;
 
@@ -1009,6 +1173,9 @@ struct platform_device *__init at32_add_device_twi(unsigned int id)
 
 	atmel_twi0_pclk.dev = &pdev->dev;
 
+	if (b)
+		i2c_register_board_info(id, b, n);
+
 	platform_device_add(pdev);
 	return pdev;
 
@@ -1351,9 +1518,39 @@ static struct clk usba0_hclk = {
 	.index		= 6,
 };
 
+#define EP(nam, idx, maxpkt, maxbk, dma, isoc)			\
+	[idx] = {						\
+		.name		= nam,				\
+		.index		= idx,				\
+		.fifo_size	= maxpkt,			\
+		.nr_banks	= maxbk,			\
+		.can_dma	= dma,				\
+		.can_isoc	= isoc,				\
+	}
+
+static struct usba_ep_data at32_usba_ep[] __initdata = {
+	EP("ep0",     0,   64, 1, 0, 0),
+	EP("ep1",     1,  512, 2, 1, 1),
+	EP("ep2",     2,  512, 2, 1, 1),
+	EP("ep3-int", 3,   64, 3, 1, 0),
+	EP("ep4-int", 4,   64, 3, 1, 0),
+	EP("ep5",     5, 1024, 3, 1, 1),
+	EP("ep6",     6, 1024, 3, 1, 1),
+};
+
+#undef EP
+
 struct platform_device *__init
 at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
 {
+	/*
+	 * pdata doesn't have room for any endpoints, so we need to
+	 * append room for the ones we need right after it.
+	 */
+	struct {
+		struct usba_platform_data pdata;
+		struct usba_ep_data ep[7];
+	} usba_data;
 	struct platform_device *pdev;
 
 	if (id != 0)
@@ -1367,13 +1564,20 @@ at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
 					  ARRAY_SIZE(usba0_resource)))
 		goto out_free_pdev;
 
-	if (data) {
-		if (platform_device_add_data(pdev, data, sizeof(*data)))
-			goto out_free_pdev;
+	if (data)
+		usba_data.pdata.vbus_pin = data->vbus_pin;
+	else
+		usba_data.pdata.vbus_pin = -EINVAL;
+
+	data = &usba_data.pdata;
+	data->num_ep = ARRAY_SIZE(at32_usba_ep);
+	memcpy(data->ep, at32_usba_ep, sizeof(at32_usba_ep));
 
-		if (data->vbus_pin != GPIO_PIN_NONE)
-			at32_select_gpio(data->vbus_pin, 0);
-	}
+	if (platform_device_add_data(pdev, data, sizeof(usba_data)))
+		goto out_free_pdev;
+
+	if (data->vbus_pin >= 0)
+		at32_select_gpio(data->vbus_pin, 0);
 
 	usba0_pclk.dev = &pdev->dev;
 	usba0_hclk.dev = &pdev->dev;
@@ -1694,7 +1898,8 @@ struct clk *at32_clock_list[] = {
 	&pio2_mck,
 	&pio3_mck,
 	&pio4_mck,
-	&at32_systc0_pclk,
+	&at32_tcb0_t0_clk,
+	&at32_tcb1_t0_clk,
 	&atmel_usart0_usart,
 	&atmel_usart1_usart,
 	&atmel_usart2_usart,
diff --git a/arch/avr32/mach-at32ap/intc.c b/arch/avr32/mach-at32ap/intc.c
index 0b286cd53028..097cf4e84052 100644
--- a/arch/avr32/mach-at32ap/intc.c
+++ b/arch/avr32/mach-at32ap/intc.c
@@ -13,7 +13,6 @@
 #include <linux/irq.h>
 #include <linux/platform_device.h>
 
-#include <asm/intc.h>
 #include <asm/io.h>
 
 #include "intc.h"
diff --git a/arch/avr32/mach-at32ap/pm-at32ap700x.S b/arch/avr32/mach-at32ap/pm-at32ap700x.S
new file mode 100644
index 000000000000..949e2485e278
--- /dev/null
+++ b/arch/avr32/mach-at32ap/pm-at32ap700x.S
@@ -0,0 +1,66 @@
+/*
+ * Low-level Power Management code.
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <asm/asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+#include <asm/arch/pm.h>
+
+	.section .bss, "wa", @nobits
+	.global	disable_idle_sleep
+	.type	disable_idle_sleep, @object
+disable_idle_sleep:
+	.int	4
+	.size	disable_idle_sleep, . - disable_idle_sleep
+
+	/* Keep this close to the irq handlers */
+	.section .irq.text, "ax", @progbits
+
+	/*
+	 * void cpu_enter_idle(void)
+	 *
+	 * Put the CPU into "idle" mode, in which it will consume
+	 * significantly less power.
+	 *
+	 * If an interrupt comes along in the window between
+	 * unmask_interrupts and the sleep instruction below, the
+	 * interrupt code will adjust the return address so that we
+	 * never execute the sleep instruction. This is required
+	 * because the AP7000 doesn't unmask interrupts when entering
+	 * sleep modes; later CPUs may not need this workaround.
+	 */
+	.global	cpu_enter_idle
+	.type	cpu_enter_idle, @function
+cpu_enter_idle:
+	mask_interrupts
+	get_thread_info r8
+	ld.w	r9, r8[TI_flags]
+	bld	r9, TIF_NEED_RESCHED
+	brcs	.Lret_from_sleep
+	sbr	r9, TIF_CPU_GOING_TO_SLEEP
+	st.w	r8[TI_flags], r9
+	unmask_interrupts
+	sleep	CPU_SLEEP_IDLE
+	.size	cpu_idle_sleep, . - cpu_idle_sleep
+
+	/*
+	 * Common return path for PM functions that don't run from
+	 * SRAM.
+	 */
+	.global cpu_idle_skip_sleep
+	.type	cpu_idle_skip_sleep, @function
+cpu_idle_skip_sleep:
+	mask_interrupts
+	ld.w	r9, r8[TI_flags]
+	cbr	r9, TIF_CPU_GOING_TO_SLEEP
+	st.w	r8[TI_flags], r9
+.Lret_from_sleep:
+	unmask_interrupts
+	retal	r12
+	.size	cpu_idle_skip_sleep, . - cpu_idle_skip_sleep
diff --git a/arch/avr32/mach-at32ap/time-tc.c b/arch/avr32/mach-at32ap/time-tc.c
deleted file mode 100644
index 10265863c982..000000000000
--- a/arch/avr32/mach-at32ap/time-tc.c
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Atmel Corporation
- *
- * Based on MIPS implementation arch/mips/kernel/time.c
- *   Copyright 2001 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/clk.h>
-#include <linux/clocksource.h>
-#include <linux/time.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/kernel_stat.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/profile.h>
-#include <linux/sysdev.h>
-#include <linux/err.h>
-
-#include <asm/div64.h>
-#include <asm/sysreg.h>
-#include <asm/io.h>
-#include <asm/sections.h>
-
-#include <asm/arch/time.h>
-
-/* how many counter cycles in a jiffy? */
-static u32 cycles_per_jiffy;
-
-/* the count value for the next timer interrupt */
-static u32 expirelo;
-
-/* the I/O registers of the TC module */
-static void __iomem *ioregs;
-
-cycle_t read_cycle_count(void)
-{
-	return (cycle_t)timer_read(ioregs, 0, CV);
-}
-
-struct clocksource clocksource_avr32 = {
-	.name		= "avr32",
-	.rating		= 342,
-	.read		= read_cycle_count,
-	.mask		= CLOCKSOURCE_MASK(16),
-	.shift		= 16,
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static void avr32_timer_ack(void)
-{
-	u16 count = expirelo;
-
-	/* Ack this timer interrupt and set the next one, use a u16
-	 * variable so it will wrap around correctly */
-	count += cycles_per_jiffy;
-	expirelo = count;
-	timer_write(ioregs, 0, RC, expirelo);
-
-	/* Check to see if we have missed any timer interrupts */
-	count = timer_read(ioregs, 0, CV);
-	if ((count - expirelo) < 0x7fff) {
-		expirelo = count + cycles_per_jiffy;
-		timer_write(ioregs, 0, RC, expirelo);
-	}
-}
-
-u32 avr32_hpt_read(void)
-{
-	return timer_read(ioregs, 0, CV);
-}
-
-static int avr32_timer_calc_div_and_set_jiffies(struct clk *pclk)
-{
-	unsigned int cycles_max = (clocksource_avr32.mask + 1) / 2;
-	unsigned int divs[] = { 4, 8, 16, 32 };
-	int divs_size = ARRAY_SIZE(divs);
-	int i = 0;
-	unsigned long count_hz;
-	unsigned long shift;
-	unsigned long mult;
-	int clock_div = -1;
-	u64 tmp;
-
-	shift = clocksource_avr32.shift;
-
-	do {
-		count_hz = clk_get_rate(pclk) / divs[i];
-		mult = clocksource_hz2mult(count_hz, shift);
-		clocksource_avr32.mult = mult;
-
-		tmp = TICK_NSEC;
-		tmp <<= shift;
-		tmp += mult / 2;
-		do_div(tmp, mult);
-
-		cycles_per_jiffy = tmp;
-	} while (cycles_per_jiffy > cycles_max && ++i < divs_size);
-
-	clock_div = i + 1;
-
-	if (clock_div > divs_size) {
-		pr_debug("timer: could not calculate clock divider\n");
-		return -EFAULT;
-	}
-
-	/* Set the clock divider */
-	timer_write(ioregs, 0, CMR, TIMER_BF(CMR_TCCLKS, clock_div));
-
-	return 0;
-}
-
-int avr32_hpt_init(unsigned int count)
-{
-	struct resource *regs;
-	struct clk *pclk;
-	int irq = -1;
-	int ret = 0;
-
-	ret = -ENXIO;
-
-	irq = platform_get_irq(&at32_systc0_device, 0);
-	if (irq < 0) {
-		pr_debug("timer: could not get irq\n");
-		goto out_error;
-	}
-
-	pclk = clk_get(&at32_systc0_device.dev, "pclk");
-	if (IS_ERR(pclk)) {
-		pr_debug("timer: could not get clk: %ld\n", PTR_ERR(pclk));
-		goto out_error;
-	}
-	clk_enable(pclk);
-
-	regs = platform_get_resource(&at32_systc0_device, IORESOURCE_MEM, 0);
-	if (!regs) {
-		pr_debug("timer: could not get resource\n");
-		goto out_error_clk;
-	}
-
-	ioregs = ioremap(regs->start, regs->end - regs->start + 1);
-	if (!ioregs) {
-		pr_debug("timer: could not get ioregs\n");
-		goto out_error_clk;
-	}
-
-	ret = avr32_timer_calc_div_and_set_jiffies(pclk);
-	if (ret)
-		goto out_error_io;
-
-	ret = setup_irq(irq, &timer_irqaction);
-	if (ret) {
-		pr_debug("timer: could not request irq %d: %d\n",
-				irq, ret);
-		goto out_error_io;
-	}
-
-	expirelo = (timer_read(ioregs, 0, CV) / cycles_per_jiffy + 1)
-		* cycles_per_jiffy;
-
-	/* Enable clock and interrupts on RC compare */
-	timer_write(ioregs, 0, CCR, TIMER_BIT(CCR_CLKEN));
-	timer_write(ioregs, 0, IER, TIMER_BIT(IER_CPCS));
-	/* Set cycles to first interrupt */
-	timer_write(ioregs, 0,  RC, expirelo);
-
-	printk(KERN_INFO "timer: AT32AP system timer/counter at 0x%p irq %d\n",
-			ioregs, irq);
-
-	return 0;
-
-out_error_io:
-	iounmap(ioregs);
-out_error_clk:
-	clk_put(pclk);
-out_error:
-	return ret;
-}
-
-int avr32_hpt_start(void)
-{
-	timer_write(ioregs, 0, CCR, TIMER_BIT(CCR_SWTRG));
-	return 0;
-}
-
-irqreturn_t timer_interrupt(int irq, void *dev_id)
-{
-	unsigned int sr = timer_read(ioregs, 0, SR);
-
-	if (sr & TIMER_BIT(SR_CPCS)) {
-		/* ack timer interrupt and try to set next interrupt */
-		avr32_timer_ack();
-
-		/*
-		 * Call the generic timer interrupt handler
-		 */
-		write_seqlock(&xtime_lock);
-		do_timer(1);
-		write_sequnlock(&xtime_lock);
-
-		/*
-		 * In UP mode, we call local_timer_interrupt() to do profiling
-		 * and process accounting.
-		 *
-		 * SMP is not supported yet.
-		 */
-		local_timer_interrupt(irq, dev_id);
-
-		return IRQ_HANDLED;
-	}
-
-	return IRQ_NONE;
-}
diff --git a/arch/avr32/mm/init.c b/arch/avr32/mm/init.c
index 480760bde63f..0e64ddc45e37 100644
--- a/arch/avr32/mm/init.c
+++ b/arch/avr32/mm/init.c
@@ -34,9 +34,6 @@ struct page *empty_zero_page;
  */
 unsigned long mmu_context_cache = NO_CONTEXT;
 
-#define START_PFN	(NODE_DATA(0)->bdata->node_boot_start >> PAGE_SHIFT)
-#define MAX_LOW_PFN	(NODE_DATA(0)->bdata->node_low_pfn)
-
 void show_mem(void)
 {
 	int total = 0, reserved = 0, cached = 0;
diff --git a/arch/avr32/oprofile/op_model_avr32.c b/arch/avr32/oprofile/op_model_avr32.c
index e2f876bfc86b..df42325c7f81 100644
--- a/arch/avr32/oprofile/op_model_avr32.c
+++ b/arch/avr32/oprofile/op_model_avr32.c
@@ -16,7 +16,6 @@
 #include <linux/sched.h>
 #include <linux/types.h>
 
-#include <asm/intc.h>
 #include <asm/sysreg.h>
 #include <asm/system.h>