summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
authorEric Miao <eric.y.miao@gmail.com>2010-01-11 11:17:25 +0300
committerEric Miao <eric.y.miao@gmail.com>2010-05-11 19:25:00 +0400
commitb6eede112673678f8a7a1680d6ad12245443829d (patch)
tree02431b17ebddb2d4c290901f05e33079763b914e /arch
parent1fe8c2bcad52d16e4d31d3680b9bb536c56df3d8 (diff)
downloadlinux-b6eede112673678f8a7a1680d6ad12245443829d.tar.xz
[ARM] pxa/spitz: use generic GPIO API and remove pxa_gpio_mode()
REVISIT: change to GPIO18 is ugly, need to make sure whether that's really necessary - GPIO18_RDY as an VLIO input signal - we don't normally need to do such kind of trick during low power mode. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/mach-pxa/spitz.c4
-rw-r--r--arch/arm/mach-pxa/spitz_pm.c28
2 files changed, 24 insertions, 8 deletions
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 01bdd7500df4..451029ea9eec 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -86,6 +86,7 @@ static unsigned long spitz_pin_config[] __initdata = {
/* GPIOs */
GPIO9_GPIO, /* SPITZ_GPIO_nSD_DETECT */
+ GPIO16_GPIO, /* SPITZ_GPIO_SYNC */
GPIO81_GPIO, /* SPITZ_GPIO_nSD_WP */
GPIO41_GPIO, /* SPITZ_GPIO_USB_CONNECT */
GPIO37_GPIO, /* SPITZ_GPIO_USB_HOST */
@@ -119,7 +120,8 @@ static unsigned long spitz_pin_config[] __initdata = {
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
- GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
+ GPIO0_GPIO | WAKEUP_ON_EDGE_RISE, /* SPITZ_GPIO_KEY_INT */
+ GPIO1_GPIO | WAKEUP_ON_EDGE_FALL, /* SPITZ_GPIO_RESET */
};
/*
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index fc5a70c40358..4209ddf6da61 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -24,9 +24,10 @@
#include <mach/sharpsl.h>
#include <mach/spitz.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/pxa27x.h>
+
#include "sharpsl.h"
+#include "generic.h"
#define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */
#define SHARPSL_CHARGE_ON_TEMP 0xe0 /* 2.9V */
@@ -37,10 +38,17 @@
static int spitz_last_ac_status;
+static struct gpio spitz_charger_gpios[] = {
+ { SPITZ_GPIO_KEY_INT, GPIOF_IN, "Keyboard Interrupt" },
+ { SPITZ_GPIO_SYNC, GPIOF_IN, "Sync" },
+ { SPITZ_GPIO_ADC_TEMP_ON, GPIOF_OUT_INIT_LOW, "ADC Temp On" },
+ { SPITZ_GPIO_JK_B, GPIOF_OUT_INIT_LOW, "JK B" },
+ { SPITZ_GPIO_CHRG_ON, GPIOF_OUT_INIT_LOW, "Charger On" },
+};
+
static void spitz_charger_init(void)
{
- pxa_gpio_mode(SPITZ_GPIO_KEY_INT | GPIO_IN);
- pxa_gpio_mode(SPITZ_GPIO_SYNC | GPIO_IN);
+ gpio_request_array(ARRAY_AND_SIZE(spitz_charger_gpios));
}
static void spitz_measure_temp(int on)
@@ -76,6 +84,11 @@ static void spitz_discharge1(int on)
gpio_set_value(SPITZ_GPIO_LED_GREEN, on);
}
+static unsigned long gpio18_config[] = {
+ GPIO18_RDY,
+ GPIO18_GPIO,
+};
+
static void spitz_presuspend(void)
{
spitz_last_ac_status = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
@@ -97,7 +110,9 @@ static void spitz_presuspend(void)
PGSR3 &= ~SPITZ_GPIO_G3_STROBE_BIT;
PGSR2 |= GPIO_bit(SPITZ_GPIO_KEY_STROBE0);
- pxa_gpio_mode(GPIO18_RDY|GPIO_OUT | GPIO_DFLT_HIGH);
+ pxa2xx_mfp_config(&gpio18_config[0], 1);
+ gpio_request_one(18, GPIOF_OUT_INIT_HIGH, "Unknown");
+ gpio_free(18);
PRER = GPIO_bit(SPITZ_GPIO_KEY_INT);
PFER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET);
@@ -114,8 +129,7 @@ static void spitz_presuspend(void)
static void spitz_postsuspend(void)
{
- pxa_gpio_mode(GPIO18_RDY_MD);
- pxa_gpio_mode(10 | GPIO_IN);
+ pxa2xx_mfp_config(&gpio18_config[1], 1);
}
static int spitz_should_wakeup(unsigned int resume_on_alarm)