x86: remove the Voyager 32-bit subarch

Impact: remove unused/broken code

The Voyager subarch last built successfully on the v2.6.26 kernel
and has been stale since then and does not build on the v2.6.27,
v2.6.28 and v2.6.29-rc5 kernels.

No actual users beyond the maintainer reported this breakage.
Patches were sent and most of the fixes were accepted but the
discussion around how to do a few remaining issues cleanly
fizzled out with no resolution and the code remained broken.

In the v2.6.30 x86 tree development cycle 32-bit subarch support
has been reworked and removed - and the Voyager code, beyond the
build problems already known, needs serious and significant
changes and probably a rewrite to support it.

CONFIG_X86_VOYAGER has been marked BROKEN then. The maintainer has
been notified but no patches have been sent so far to fix it.

While all other subarchs have been converted to the new scheme,
voyager is still broken. We'd prefer to receive patches which
clean up the current situation in a constructive way, but even in
case of removal there is no obstacle to add that support back
after the issues have been sorted out in a mutually acceptable
fashion.

So remove this inactive code for now.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

21 files changed, 1 insertions, 4334 deletions

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 35efba546e03..5e2919c0ff92 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -302,7 +302,6 @@ config X86_EXTENDED_PLATFORM
 		SGI 320/540 (Visual Workstation)
 		Summit/EXA (IBM x440)
 		Unisys ES7000 IA32 series
-		Voyager (NCR)
 
 	  If you have one of these systems, or if you want to build a
 	  generic distribution kernel, say Y here - otherwise say N.
@@ -423,19 +422,6 @@ config X86_ES7000
 	  Support for Unisys ES7000 systems.  Say 'Y' here if this kernel is
 	  supposed to run on an IA32-based Unisys ES7000 system.
 
-config X86_VOYAGER
-	bool "Voyager (NCR)"
-	depends on SMP && !PCI && BROKEN
-	depends on X86_32_NON_STANDARD
-	---help---
-	  Voyager is an MCA-based 32-way capable SMP architecture proprietary
-	  to NCR Corp.  Machine classes 345x/35xx/4100/51xx are Voyager-based.
-
-	  *** WARNING ***
-
-	  If you do not specifically know you have a Voyager based machine,
-	  say N here, otherwise the kernel you build will not be bootable.
-
 config SCHED_OMIT_FRAME_POINTER
 	def_bool y
 	prompt "Single-depth WCHAN output"
diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
index cd48c7210016..c70eff69a1fb 100644
--- a/arch/x86/boot/Makefile
+++ b/arch/x86/boot/Makefile
@@ -32,7 +32,6 @@ setup-y		+= a20.o cmdline.o copy.o cpu.o cpucheck.o edd.o
 setup-y		+= header.o main.o mca.o memory.o pm.o pmjump.o
 setup-y		+= printf.o string.o tty.o video.o video-mode.o version.o
 setup-$(CONFIG_X86_APM_BOOT) += apm.o
-setup-$(CONFIG_X86_VOYAGER) += voyager.o
 
 # The link order of the video-*.o modules can matter.  In particular,
 # video-vga.o *must* be listed first, followed by video-vesa.o.
diff --git a/arch/x86/boot/a20.c b/arch/x86/boot/a20.c
index fba8e9c6a504..7c19ce8c2442 100644
--- a/arch/x86/boot/a20.c
+++ b/arch/x86/boot/a20.c
@@ -126,11 +126,6 @@ static void enable_a20_fast(void)
 
 int enable_a20(void)
 {
-#ifdef CONFIG_X86_VOYAGER
-	/* On Voyager, a20_test() is unsafe? */
-	enable_a20_kbc();
-	return 0;
-#else
        int loops = A20_ENABLE_LOOPS;
        int kbc_err;
 
@@ -164,5 +159,4 @@ int enable_a20(void)
        }
        
        return -1;
-#endif
 }
diff --git a/arch/x86/boot/boot.h b/arch/x86/boot/boot.h
index cc0ef13fba7a..7b2692e897e5 100644
--- a/arch/x86/boot/boot.h
+++ b/arch/x86/boot/boot.h
@@ -302,9 +302,6 @@ void probe_cards(int unsafe);
 /* video-vesa.c */
 void vesa_store_edid(void);
 
-/* voyager.c */
-int query_voyager(void);
-
 #endif /* __ASSEMBLY__ */
 
 #endif /* BOOT_BOOT_H */
diff --git a/arch/x86/boot/main.c b/arch/x86/boot/main.c
index 197421db1af1..58f0415d3ae0 100644
--- a/arch/x86/boot/main.c
+++ b/arch/x86/boot/main.c
@@ -149,11 +149,6 @@ void main(void)
 	/* Query MCA information */
 	query_mca();
 
-	/* Voyager */
-#ifdef CONFIG_X86_VOYAGER
-	query_voyager();
-#endif
-
 	/* Query Intel SpeedStep (IST) information */
 	query_ist();
 
diff --git a/arch/x86/boot/voyager.c b/arch/x86/boot/voyager.c
deleted file mode 100644
index 433909d61e5c..000000000000
--- a/arch/x86/boot/voyager.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/* -*- linux-c -*- ------------------------------------------------------- *
- *
- *   Copyright (C) 1991, 1992 Linus Torvalds
- *   Copyright 2007 rPath, Inc. - All Rights Reserved
- *
- *   This file is part of the Linux kernel, and is made available under
- *   the terms of the GNU General Public License version 2.
- *
- * ----------------------------------------------------------------------- */
-
-/*
- * Get the Voyager config information
- */
-
-#include "boot.h"
-
-int query_voyager(void)
-{
-	u8 err;
-	u16 es, di;
-	/* Abuse the apm_bios_info area for this */
-	u8 *data_ptr = (u8 *)&boot_params.apm_bios_info;
-
-	data_ptr[0] = 0xff;	/* Flag on config not found(?) */
-
-	asm("pushw %%es ; "
-	    "int $0x15 ; "
-	    "setc %0 ; "
-	    "movw %%es, %1 ; "
-	    "popw %%es"
-	    : "=q" (err), "=r" (es), "=D" (di)
-	    : "a" (0xffc0));
-
-	if (err)
-		return -1;	/* Not Voyager */
-
-	set_fs(es);
-	copy_from_fs(data_ptr, di, 7);	/* Table is 7 bytes apparently */
-	return 0;
-}
diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index 096dd5359cd9..5c023f6f652c 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -197,7 +197,6 @@ CONFIG_SPARSE_IRQ=y
 CONFIG_X86_FIND_SMP_CONFIG=y
 CONFIG_X86_MPPARSE=y
 # CONFIG_X86_ELAN is not set
-# CONFIG_X86_VOYAGER is not set
 # CONFIG_X86_GENERICARCH is not set
 # CONFIG_X86_VSMP is not set
 # CONFIG_X86_RDC321X is not set
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index 2efb5d5063ff..4157cc4a2bde 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -199,7 +199,6 @@ CONFIG_SPARSE_IRQ=y
 CONFIG_X86_FIND_SMP_CONFIG=y
 CONFIG_X86_MPPARSE=y
 # CONFIG_X86_ELAN is not set
-# CONFIG_X86_VOYAGER is not set
 # CONFIG_X86_GENERICARCH is not set
 # CONFIG_X86_VSMP is not set
 CONFIG_SCHED_OMIT_FRAME_POINTER=y
diff --git a/arch/x86/include/asm/mach-voyager/do_timer.h b/arch/x86/include/asm/mach-voyager/do_timer.h
deleted file mode 100644
index 9e5a459fd15b..000000000000
--- a/arch/x86/include/asm/mach-voyager/do_timer.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* defines for inline arch setup functions */
-#include <linux/clockchips.h>
-
-#include <asm/voyager.h>
-#include <asm/i8253.h>
-
-/**
- * do_timer_interrupt_hook - hook into timer tick
- *
- * Call the pit clock event handler. see asm/i8253.h
- **/
-static inline void do_timer_interrupt_hook(void)
-{
-	global_clock_event->event_handler(global_clock_event);
-	voyager_timer_interrupt();
-}
-
diff --git a/arch/x86/include/asm/mach-voyager/entry_arch.h b/arch/x86/include/asm/mach-voyager/entry_arch.h
deleted file mode 100644
index ae52624b5937..000000000000
--- a/arch/x86/include/asm/mach-voyager/entry_arch.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* -*- mode: c; c-basic-offset: 8 -*- */
-
-/* Copyright (C) 2002
- *
- * Author: James.Bottomley@HansenPartnership.com
- *
- * linux/arch/i386/voyager/entry_arch.h
- *
- * This file builds the VIC and QIC CPI gates
- */
-
-/* initialise the voyager interrupt gates 
- *
- * This uses the macros in irq.h to set up assembly jump gates.  The
- * calls are then redirected to the same routine with smp_ prefixed */
-BUILD_INTERRUPT(vic_sys_interrupt, VIC_SYS_INT)
-BUILD_INTERRUPT(vic_cmn_interrupt, VIC_CMN_INT)
-BUILD_INTERRUPT(vic_cpi_interrupt, VIC_CPI_LEVEL0);
-
-/* do all the QIC interrupts */
-BUILD_INTERRUPT(qic_timer_interrupt, QIC_TIMER_CPI);
-BUILD_INTERRUPT(qic_invalidate_interrupt, QIC_INVALIDATE_CPI);
-BUILD_INTERRUPT(qic_reschedule_interrupt, QIC_RESCHEDULE_CPI);
-BUILD_INTERRUPT(qic_enable_irq_interrupt, QIC_ENABLE_IRQ_CPI);
-BUILD_INTERRUPT(qic_call_function_interrupt, QIC_CALL_FUNCTION_CPI);
-BUILD_INTERRUPT(qic_call_function_single_interrupt, QIC_CALL_FUNCTION_SINGLE_CPI);
diff --git a/arch/x86/include/asm/mach-voyager/setup_arch.h b/arch/x86/include/asm/mach-voyager/setup_arch.h
deleted file mode 100644
index 71729ca05cd7..000000000000
--- a/arch/x86/include/asm/mach-voyager/setup_arch.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#include <asm/voyager.h>
-#include <asm/setup.h>
-#define VOYAGER_BIOS_INFO ((struct voyager_bios_info *) \
-			(&boot_params.apm_bios_info))
-
-/* Hook to call BIOS initialisation function */
-
-/* for voyager, pass the voyager BIOS/SUS info area to the detection
- * routines */
-
-#define ARCH_SETUP	voyager_detect(VOYAGER_BIOS_INFO);
-
diff --git a/arch/x86/include/asm/vic.h b/arch/x86/include/asm/vic.h
deleted file mode 100644
index 53100f353612..000000000000
--- a/arch/x86/include/asm/vic.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/* Copyright (C) 1999,2001
- *
- * Author: J.E.J.Bottomley@HansenPartnership.com
- *
- * Standard include definitions for the NCR Voyager Interrupt Controller */
-
-/* The eight CPI vectors.  To activate a CPI, you write a bit mask
- * corresponding to the processor set to be interrupted into the
- * relevant register.  That set of CPUs will then be interrupted with
- * the CPI */
-static const int VIC_CPI_Registers[] =
-	{0xFC00, 0xFC01, 0xFC08, 0xFC09,
-	 0xFC10, 0xFC11, 0xFC18, 0xFC19 };
-
-#define VIC_PROC_WHO_AM_I		0xfc29
-#	define	QUAD_IDENTIFIER		0xC0
-#	define  EIGHT_SLOT_IDENTIFIER	0xE0
-#define QIC_EXTENDED_PROCESSOR_SELECT	0xFC72
-#define VIC_CPI_BASE_REGISTER		0xFC41
-#define VIC_PROCESSOR_ID		0xFC21
-#	define VIC_CPU_MASQUERADE_ENABLE 0x8
-
-#define VIC_CLAIM_REGISTER_0		0xFC38
-#define VIC_CLAIM_REGISTER_1		0xFC39
-#define VIC_REDIRECT_REGISTER_0		0xFC60
-#define VIC_REDIRECT_REGISTER_1		0xFC61
-#define VIC_PRIORITY_REGISTER		0xFC20
-
-#define VIC_PRIMARY_MC_BASE		0xFC48
-#define VIC_SECONDARY_MC_BASE		0xFC49
-
-#define QIC_PROCESSOR_ID		0xFC71
-#	define	QIC_CPUID_ENABLE	0x08
-
-#define QIC_VIC_CPI_BASE_REGISTER	0xFC79
-#define QIC_CPI_BASE_REGISTER		0xFC7A
-
-#define QIC_MASK_REGISTER0		0xFC80
-/* NOTE: these are masked high, enabled low */
-#	define QIC_PERF_TIMER		0x01
-#	define QIC_LPE			0x02
-#	define QIC_SYS_INT		0x04
-#	define QIC_CMN_INT		0x08
-/* at the moment, just enable CMN_INT, disable SYS_INT */
-#	define QIC_DEFAULT_MASK0	(~(QIC_CMN_INT /* | VIC_SYS_INT */))
-#define QIC_MASK_REGISTER1		0xFC81
-#	define QIC_BOOT_CPI_MASK	0xFE
-/* Enable CPI's 1-6 inclusive */
-#	define QIC_CPI_ENABLE		0x81
-
-#define QIC_INTERRUPT_CLEAR0		0xFC8A
-#define QIC_INTERRUPT_CLEAR1		0xFC8B
-
-/* this is where we place the CPI vectors */
-#define VIC_DEFAULT_CPI_BASE		0xC0
-/* this is where we place the QIC CPI vectors */
-#define QIC_DEFAULT_CPI_BASE		0xD0
-
-#define VIC_BOOT_INTERRUPT_MASK		0xfe
-
-extern void smp_vic_timer_interrupt(void);
diff --git a/arch/x86/include/asm/voyager.h b/arch/x86/include/asm/voyager.h
deleted file mode 100644
index c1635d43616f..000000000000
--- a/arch/x86/include/asm/voyager.h
+++ /dev/null
@@ -1,571 +0,0 @@
-/* Copyright (C) 1999,2001
- *
- * Author: J.E.J.Bottomley@HansenPartnership.com
- *
- * Standard include definitions for the NCR Voyager system */
-
-#undef	VOYAGER_DEBUG
-#undef	VOYAGER_CAT_DEBUG
-
-#ifdef VOYAGER_DEBUG
-#define VDEBUG(x)	printk x
-#else
-#define VDEBUG(x)
-#endif
-
-/* There are three levels of voyager machine: 3,4 and 5. The rule is
- * if it's less than 3435 it's a Level 3 except for a 3360 which is
- * a level 4.  A 3435 or above is a Level 5 */
-#define VOYAGER_LEVEL5_AND_ABOVE	0x3435
-#define VOYAGER_LEVEL4			0x3360
-
-/* The L4 DINO ASIC */
-#define VOYAGER_DINO			0x43
-
-/* voyager ports in standard I/O space */
-#define VOYAGER_MC_SETUP	0x96
-
-
-#define	VOYAGER_CAT_CONFIG_PORT			0x97
-#	define VOYAGER_CAT_DESELECT		0xff
-#define VOYAGER_SSPB_RELOCATION_PORT		0x98
-
-/* Valid CAT controller commands */
-/* start instruction register cycle */
-#define VOYAGER_CAT_IRCYC			0x01
-/* start data register cycle */
-#define VOYAGER_CAT_DRCYC			0x02
-/* move to execute state */
-#define VOYAGER_CAT_RUN				0x0F
-/* end operation */
-#define VOYAGER_CAT_END				0x80
-/* hold in idle state */
-#define VOYAGER_CAT_HOLD			0x90
-/* single step an "intest" vector */
-#define VOYAGER_CAT_STEP			0xE0
-/* return cat controller to CLEMSON mode */
-#define VOYAGER_CAT_CLEMSON			0xFF
-
-/* the default cat command header */
-#define VOYAGER_CAT_HEADER			0x7F
-
-/* the range of possible CAT module ids in the system */
-#define VOYAGER_MIN_MODULE			0x10
-#define VOYAGER_MAX_MODULE			0x1f
-
-/* The voyager registers per asic */
-#define VOYAGER_ASIC_ID_REG			0x00
-#define VOYAGER_ASIC_TYPE_REG			0x01
-/* the sub address registers can be made auto incrementing on reads */
-#define VOYAGER_AUTO_INC_REG			0x02
-#	define VOYAGER_AUTO_INC			0x04
-#	define VOYAGER_NO_AUTO_INC		0xfb
-#define VOYAGER_SUBADDRDATA			0x03
-#define VOYAGER_SCANPATH			0x05
-#	define VOYAGER_CONNECT_ASIC		0x01
-#	define VOYAGER_DISCONNECT_ASIC		0xfe
-#define VOYAGER_SUBADDRLO			0x06
-#define VOYAGER_SUBADDRHI			0x07
-#define VOYAGER_SUBMODSELECT			0x08
-#define VOYAGER_SUBMODPRESENT			0x09
-
-#define VOYAGER_SUBADDR_LO			0xff
-#define VOYAGER_SUBADDR_HI			0xffff
-
-/* the maximum size of a scan path -- used to form instructions */
-#define VOYAGER_MAX_SCAN_PATH			0x100
-/* the biggest possible register size (in bytes) */
-#define VOYAGER_MAX_REG_SIZE			4
-
-/* Total number of possible modules (including submodules) */
-#define VOYAGER_MAX_MODULES			16
-/* Largest number of asics per module */
-#define VOYAGER_MAX_ASICS_PER_MODULE		7
-
-/* the CAT asic of each module is always the first one */
-#define VOYAGER_CAT_ID				0
-#define VOYAGER_PSI				0x1a
-
-/* voyager instruction operations and registers */
-#define VOYAGER_READ_CONFIG			0x1
-#define VOYAGER_WRITE_CONFIG			0x2
-#define VOYAGER_BYPASS				0xff
-
-typedef struct voyager_asic {
-	__u8	asic_addr;	/* ASIC address; Level 4 */
-	__u8	asic_type;      /* ASIC type */
-	__u8	asic_id;	/* ASIC id */
-	__u8	jtag_id[4];	/* JTAG id */
-	__u8	asic_location;	/* Location within scan path; start w/ 0 */
-	__u8	bit_location;	/* Location within bit stream; start w/ 0 */
-	__u8	ireg_length;	/* Instruction register length */
-	__u16	subaddr;	/* Amount of sub address space */
-	struct voyager_asic *next;	/* Next asic in linked list */
-} voyager_asic_t;
-
-typedef struct voyager_module {
-	__u8	module_addr;		/* Module address */
-	__u8	scan_path_connected;	/* Scan path connected */
-	__u16   ee_size;		/* Size of the EEPROM */
-	__u16   num_asics;		/* Number of Asics */
-	__u16   inst_bits;		/* Instruction bits in the scan path */
-	__u16   largest_reg;		/* Largest register in the scan path */
-	__u16   smallest_reg;		/* Smallest register in the scan path */
-	voyager_asic_t   *asic;		/* First ASIC in scan path (CAT_I) */
-	struct   voyager_module *submodule;	/* Submodule pointer */
-	struct   voyager_module *next;		/* Next module in linked list */
-} voyager_module_t;
-
-typedef struct voyager_eeprom_hdr {
-	 __u8  module_id[4];
-	 __u8  version_id;
-	 __u8  config_id;
-	 __u16 boundry_id;	/* boundary scan id */
-	 __u16 ee_size;		/* size of EEPROM */
-	 __u8  assembly[11];	/* assembly # */
-	 __u8  assembly_rev;	/* assembly rev */
-	 __u8  tracer[4];	/* tracer number */
-	 __u16 assembly_cksum;	/* asm checksum */
-	 __u16 power_consump;	/* pwr requirements */
-	 __u16 num_asics;	/* number of asics */
-	 __u16 bist_time;	/* min. bist time */
-	 __u16 err_log_offset;	/* error log offset */
-	 __u16 scan_path_offset;/* scan path offset */
-	 __u16 cct_offset;
-	 __u16 log_length;	/* length of err log */
-	 __u16 xsum_end;	/* offset to end of
-				   checksum */
-	 __u8  reserved[4];
-	 __u8  sflag;		/* starting sentinal */
-	 __u8  part_number[13];	/* prom part number */
-	 __u8  version[10];	/* version number */
-	 __u8  signature[8];
-	 __u16 eeprom_chksum;
-	 __u32  data_stamp_offset;
-	 __u8  eflag ;		 /* ending sentinal */
-} __attribute__((packed)) voyager_eprom_hdr_t;
-
-
-
-#define VOYAGER_EPROM_SIZE_OFFSET				\
-	((__u16)(&(((voyager_eprom_hdr_t *)0)->ee_size)))
-#define VOYAGER_XSUM_END_OFFSET		0x2a
-
-/* the following three definitions are for internal table layouts
- * in the module EPROMs.  We really only care about the IDs and
- * offsets */
-typedef struct voyager_sp_table {
-	__u8 asic_id;
-	__u8 bypass_flag;
-	__u16 asic_data_offset;
-	__u16 config_data_offset;
-} __attribute__((packed)) voyager_sp_table_t;
-
-typedef struct voyager_jtag_table {
-	__u8 icode[4];
-	__u8 runbist[4];
-	__u8 intest[4];
-	__u8 samp_preld[4];
-	__u8 ireg_len;
-} __attribute__((packed)) voyager_jtt_t;
-
-typedef struct voyager_asic_data_table {
-	__u8 jtag_id[4];
-	__u16 length_bsr;
-	__u16 length_bist_reg;
-	__u32 bist_clk;
-	__u16 subaddr_bits;
-	__u16 seed_bits;
-	__u16 sig_bits;
-	__u16 jtag_offset;
-} __attribute__((packed)) voyager_at_t;
-
-/* Voyager Interrupt Controller (VIC) registers */
-
-/* Base to add to Cross Processor Interrupts (CPIs) when triggering
- * the CPU IRQ line */
-/* register defines for the WCBICs (one per processor) */
-#define VOYAGER_WCBIC0	0x41		/* bus A node P1 processor 0 */
-#define VOYAGER_WCBIC1	0x49		/* bus A node P1 processor 1 */
-#define VOYAGER_WCBIC2	0x51		/* bus A node P2 processor 0 */
-#define VOYAGER_WCBIC3	0x59		/* bus A node P2 processor 1 */
-#define VOYAGER_WCBIC4	0x61		/* bus B node P1 processor 0 */
-#define VOYAGER_WCBIC5	0x69		/* bus B node P1 processor 1 */
-#define VOYAGER_WCBIC6	0x71		/* bus B node P2 processor 0 */
-#define VOYAGER_WCBIC7	0x79		/* bus B node P2 processor 1 */
-
-
-/* top of memory registers */
-#define VOYAGER_WCBIC_TOM_L	0x4
-#define VOYAGER_WCBIC_TOM_H	0x5
-
-/* register defines for Voyager Memory Contol (VMC)
- * these are present on L4 machines only */
-#define	VOYAGER_VMC1		0x81
-#define VOYAGER_VMC2		0x91
-#define VOYAGER_VMC3		0xa1
-#define VOYAGER_VMC4		0xb1
-
-/* VMC Ports */
-#define VOYAGER_VMC_MEMORY_SETUP	0x9
-#	define VMC_Interleaving		0x01
-#	define VMC_4Way			0x02
-#	define VMC_EvenCacheLines	0x04
-#	define VMC_HighLine		0x08
-#	define VMC_Start0_Enable	0x20
-#	define VMC_Start1_Enable	0x40
-#	define VMC_Vremap		0x80
-#define VOYAGER_VMC_BANK_DENSITY	0xa
-#	define	VMC_BANK_EMPTY		0
-#	define	VMC_BANK_4MB		1
-#	define	VMC_BANK_16MB		2
-#	define	VMC_BANK_64MB		3
-#	define	VMC_BANK0_MASK		0x03
-#	define	VMC_BANK1_MASK		0x0C
-#	define	VMC_BANK2_MASK		0x30
-#	define	VMC_BANK3_MASK		0xC0
-
-/* Magellan Memory Controller (MMC) defines - present on L5 */
-#define VOYAGER_MMC_ASIC_ID		1
-/* the two memory modules corresponding to memory cards in the system */
-#define VOYAGER_MMC_MEMORY0_MODULE	0x14
-#define VOYAGER_MMC_MEMORY1_MODULE	0x15
-/* the Magellan Memory Address (MMA) defines */
-#define VOYAGER_MMA_ASIC_ID		2
-
-/* Submodule number for the Quad Baseboard */
-#define VOYAGER_QUAD_BASEBOARD		1
-
-/* ASIC defines for the Quad Baseboard */
-#define VOYAGER_QUAD_QDATA0		1
-#define VOYAGER_QUAD_QDATA1		2
-#define VOYAGER_QUAD_QABC		3
-
-/* Useful areas in extended CMOS */
-#define VOYAGER_PROCESSOR_PRESENT_MASK	0x88a
-#define VOYAGER_MEMORY_CLICKMAP		0xa23
-#define VOYAGER_DUMP_LOCATION		0xb1a
-
-/* SUS In Control bit - used to tell SUS that we don't need to be
- * babysat anymore */
-#define VOYAGER_SUS_IN_CONTROL_PORT	0x3ff
-#	define VOYAGER_IN_CONTROL_FLAG	0x80
-
-/* Voyager PSI defines */
-#define VOYAGER_PSI_STATUS_REG		0x08
-#	define PSI_DC_FAIL		0x01
-#	define PSI_MON			0x02
-#	define PSI_FAULT		0x04
-#	define PSI_ALARM		0x08
-#	define PSI_CURRENT		0x10
-#	define PSI_DVM			0x20
-#	define PSI_PSCFAULT		0x40
-#	define PSI_STAT_CHG		0x80
-
-#define VOYAGER_PSI_SUPPLY_REG		0x8000
-	/* read */
-#	define PSI_FAIL_DC		0x01
-#	define PSI_FAIL_AC		0x02
-#	define PSI_MON_INT		0x04
-#	define PSI_SWITCH_OFF		0x08
-#	define PSI_HX_OFF		0x10
-#	define PSI_SECURITY		0x20
-#	define PSI_CMOS_BATT_LOW	0x40
-#	define PSI_CMOS_BATT_FAIL	0x80
-	/* write */
-#	define PSI_CLR_SWITCH_OFF	0x13
-#	define PSI_CLR_HX_OFF		0x14
-#	define PSI_CLR_CMOS_BATT_FAIL	0x17
-
-#define VOYAGER_PSI_MASK		0x8001
-#	define PSI_MASK_MASK		0x10
-
-#define VOYAGER_PSI_AC_FAIL_REG		0x8004
-#define	AC_FAIL_STAT_CHANGE		0x80
-
-#define VOYAGER_PSI_GENERAL_REG		0x8007
-	/* read */
-#	define PSI_SWITCH_ON		0x01
-#	define PSI_SWITCH_ENABLED	0x02
-#	define PSI_ALARM_ENABLED	0x08
-#	define PSI_SECURE_ENABLED	0x10
-#	define PSI_COLD_RESET		0x20
-#	define PSI_COLD_START		0x80
-	/* write */
-#	define PSI_POWER_DOWN		0x10
-#	define PSI_SWITCH_DISABLE	0x01
-#	define PSI_SWITCH_ENABLE	0x11
-#	define PSI_CLEAR		0x12
-#	define PSI_ALARM_DISABLE	0x03
-#	define PSI_ALARM_ENABLE		0x13
-#	define PSI_CLEAR_COLD_RESET	0x05
-#	define PSI_SET_COLD_RESET	0x15
-#	define PSI_CLEAR_COLD_START	0x07
-#	define PSI_SET_COLD_START	0x17
-
-
-
-struct voyager_bios_info {
-	__u8	len;
-	__u8	major;
-	__u8	minor;
-	__u8	debug;
-	__u8	num_classes;
-	__u8	class_1;
-	__u8	class_2;
-};
-
-/* The following structures and definitions are for the Kernel/SUS
- * interface these are needed to find out how SUS initialised any Quad
- * boards in the system */
-
-#define	NUMBER_OF_MC_BUSSES	2
-#define SLOTS_PER_MC_BUS	8
-#define MAX_CPUS                16      /* 16 way CPU system */
-#define MAX_PROCESSOR_BOARDS	4	/* 4 processor slot system */
-#define MAX_CACHE_LEVELS	4	/* # of cache levels supported */
-#define MAX_SHARED_CPUS		4	/* # of CPUs that can share a LARC */
-#define NUMBER_OF_POS_REGS	8
-
-typedef struct {
-	__u8	MC_Slot;
-	__u8	POS_Values[NUMBER_OF_POS_REGS];
-} __attribute__((packed)) MC_SlotInformation_t;
-
-struct QuadDescription {
-	__u8  Type;	/* for type 0 (DYADIC or MONADIC) all fields
-			 * will be zero except for slot */
-	__u8 StructureVersion;
-	__u32 CPI_BaseAddress;
-	__u32  LARC_BankSize;
-	__u32 LocalMemoryStateBits;
-	__u8  Slot; /* Processor slots 1 - 4 */
-} __attribute__((packed));
-
-struct ProcBoardInfo {
-	__u8 Type;
-	__u8 StructureVersion;
-	__u8 NumberOfBoards;
-	struct QuadDescription QuadData[MAX_PROCESSOR_BOARDS];
-} __attribute__((packed));
-
-struct CacheDescription {
-	__u8 Level;
-	__u32 TotalSize;
-	__u16 LineSize;
-	__u8  Associativity;
-	__u8  CacheType;
-	__u8  WriteType;
-	__u8  Number_CPUs_SharedBy;
-	__u8  Shared_CPUs_Hardware_IDs[MAX_SHARED_CPUS];
-
-} __attribute__((packed));
-
-struct CPU_Description {
-	__u8 CPU_HardwareId;
-	char *FRU_String;
-	__u8 NumberOfCacheLevels;
-	struct CacheDescription CacheLevelData[MAX_CACHE_LEVELS];
-} __attribute__((packed));
-
-struct CPU_Info {
-	__u8 Type;
-	__u8 StructureVersion;
-	__u8 NumberOf_CPUs;
-	struct CPU_Description CPU_Data[MAX_CPUS];
-} __attribute__((packed));
-
-
-/*
- * This structure will be used by SUS and the OS.
- * The assumption about this structure is that no blank space is
- * packed in it by our friend the compiler.
- */
-typedef struct {
-	__u8	Mailbox_SUS;		/* Written to by SUS to give
-					   commands/response to the OS */
-	__u8	Mailbox_OS;		/* Written to by the OS to give
-					   commands/response to SUS */
-	__u8	SUS_MailboxVersion;	/* Tells the OS which iteration of the
-					   interface SUS supports */
-	__u8	OS_MailboxVersion;	/* Tells SUS which iteration of the
-					   interface the OS supports */
-	__u32	OS_Flags;		/* Flags set by the OS as info for
-					   SUS */
-	__u32	SUS_Flags;		/* Flags set by SUS as info
-					   for the OS */
-	__u32	WatchDogPeriod;		/* Watchdog period (in seconds) which
-					   the DP uses to see if the OS
-					   is dead */
-	__u32	WatchDogCount;		/* Updated by the OS on every tic. */
-	__u32	MemoryFor_SUS_ErrorLog;	/* Flat 32 bit address which tells SUS
-					   where to stuff the SUS error log
-					   on a dump */
-	MC_SlotInformation_t MC_SlotInfo[NUMBER_OF_MC_BUSSES*SLOTS_PER_MC_BUS];
-					/* Storage for MCA POS data */
-	/* All new SECOND_PASS_INTERFACE fields added from this point */
-	struct ProcBoardInfo    *BoardData;
-	struct CPU_Info         *CPU_Data;
-	/* All new fields must be added from this point */
-} Voyager_KernelSUS_Mbox_t;
-
-/* structure for finding the right memory address to send a QIC CPI to */
-struct voyager_qic_cpi {
-	/* Each cache line (32 bytes) can trigger a cpi.  The cpi
-	 * read/write may occur anywhere in the cache line---pick the
-	 * middle to be safe */
-	struct  {
-		__u32 pad1[3];
-		__u32 cpi;
-		__u32 pad2[4];
-	} qic_cpi[8];
-};
-
-struct voyager_status {
-	__u32	power_fail:1;
-	__u32	switch_off:1;
-	__u32	request_from_kernel:1;
-};
-
-struct voyager_psi_regs {
-	__u8 cat_id;
-	__u8 cat_dev;
-	__u8 cat_control;
-	__u8 subaddr;
-	__u8 dummy4;
-	__u8 checkbit;
-	__u8 subaddr_low;
-	__u8 subaddr_high;
-	__u8 intstatus;
-	__u8 stat1;
-	__u8 stat3;
-	__u8 fault;
-	__u8 tms;
-	__u8 gen;
-	__u8 sysconf;
-	__u8 dummy15;
-};
-
-struct voyager_psi_subregs {
-	__u8 supply;
-	__u8 mask;
-	__u8 present;
-	__u8 DCfail;
-	__u8 ACfail;
-	__u8 fail;
-	__u8 UPSfail;
-	__u8 genstatus;
-};
-
-struct voyager_psi {
-	struct voyager_psi_regs regs;
-	struct voyager_psi_subregs subregs;
-};
-
-struct voyager_SUS {
-#define	VOYAGER_DUMP_BUTTON_NMI		0x1
-#define VOYAGER_SUS_VALID		0x2
-#define VOYAGER_SYSINT_COMPLETE		0x3
-	__u8	SUS_mbox;
-#define VOYAGER_NO_COMMAND		0x0
-#define VOYAGER_IGNORE_DUMP		0x1
-#define VOYAGER_DO_DUMP			0x2
-#define VOYAGER_SYSINT_HANDSHAKE	0x3
-#define VOYAGER_DO_MEM_DUMP		0x4
-#define VOYAGER_SYSINT_WAS_RECOVERED	0x5
-	__u8	kernel_mbox;
-#define	VOYAGER_MAILBOX_VERSION		0x10
-	__u8	SUS_version;
-	__u8	kernel_version;
-#define VOYAGER_OS_HAS_SYSINT		0x1
-#define VOYAGER_OS_IN_PROGRESS		0x2
-#define VOYAGER_UPDATING_WDPERIOD	0x4
-	__u32	kernel_flags;
-#define VOYAGER_SUS_BOOTING		0x1
-#define VOYAGER_SUS_IN_PROGRESS		0x2
-	__u32	SUS_flags;
-	__u32	watchdog_period;
-	__u32	watchdog_count;
-	__u32	SUS_errorlog;
-	/* lots of system configuration stuff under here */
-};
-
-/* Variables exported by voyager_smp */
-extern __u32 voyager_extended_vic_processors;
-extern __u32 voyager_allowed_boot_processors;
-extern __u32 voyager_quad_processors;
-extern struct voyager_qic_cpi *voyager_quad_cpi_addr[NR_CPUS];
-extern struct voyager_SUS *voyager_SUS;
-
-/* variables exported always */
-extern struct task_struct *voyager_thread;
-extern int voyager_level;
-extern struct voyager_status voyager_status;
-
-/* functions exported by the voyager and voyager_smp modules */
-extern int voyager_cat_readb(__u8 module, __u8 asic, int reg);
-extern void voyager_cat_init(void);
-extern void voyager_detect(struct voyager_bios_info *);
-extern void voyager_trap_init(void);
-extern void voyager_setup_irqs(void);
-extern int voyager_memory_detect(int region, __u32 *addr, __u32 *length);
-extern void voyager_smp_intr_init(void);
-extern __u8 voyager_extended_cmos_read(__u16 cmos_address);
-extern void voyager_smp_dump(void);
-extern void voyager_timer_interrupt(void);
-extern void smp_local_timer_interrupt(void);
-extern void voyager_power_off(void);
-extern void smp_voyager_power_off(void *dummy);
-extern void voyager_restart(void);
-extern void voyager_cat_power_off(void);
-extern void voyager_cat_do_common_interrupt(void);
-extern void voyager_handle_nmi(void);
-extern void voyager_smp_intr_init(void);
-/* Commands for the following are */
-#define	VOYAGER_PSI_READ	0
-#define VOYAGER_PSI_WRITE	1
-#define VOYAGER_PSI_SUBREAD	2
-#define VOYAGER_PSI_SUBWRITE	3
-extern void voyager_cat_psi(__u8, __u16, __u8 *);
-
-/* These define the CPIs we use in linux */
-#define VIC_CPI_LEVEL0			0
-#define VIC_CPI_LEVEL1			1
-/* now the fake CPIs */
-#define VIC_TIMER_CPI			2
-#define VIC_INVALIDATE_CPI		3
-#define VIC_RESCHEDULE_CPI		4
-#define VIC_ENABLE_IRQ_CPI		5
-#define VIC_CALL_FUNCTION_CPI		6
-#define VIC_CALL_FUNCTION_SINGLE_CPI	7
-
-/* Now the QIC CPIs:  Since we don't need the two initial levels,
- * these are 2 less than the VIC CPIs */
-#define QIC_CPI_OFFSET			1
-#define QIC_TIMER_CPI			(VIC_TIMER_CPI - QIC_CPI_OFFSET)
-#define QIC_INVALIDATE_CPI		(VIC_INVALIDATE_CPI - QIC_CPI_OFFSET)
-#define QIC_RESCHEDULE_CPI		(VIC_RESCHEDULE_CPI - QIC_CPI_OFFSET)
-#define QIC_ENABLE_IRQ_CPI		(VIC_ENABLE_IRQ_CPI - QIC_CPI_OFFSET)
-#define QIC_CALL_FUNCTION_CPI		(VIC_CALL_FUNCTION_CPI - QIC_CPI_OFFSET)
-#define QIC_CALL_FUNCTION_SINGLE_CPI	(VIC_CALL_FUNCTION_SINGLE_CPI - QIC_CPI_OFFSET)
-
-#define VIC_START_FAKE_CPI		VIC_TIMER_CPI
-#define VIC_END_FAKE_CPI		VIC_CALL_FUNCTION_SINGLE_CPI
-
-/* this is the SYS_INT CPI. */
-#define VIC_SYS_INT			8
-#define VIC_CMN_INT			15
-
-/* This is the boot CPI for alternate processors.  It gets overwritten
- * by the above once the system has activated all available processors */
-#define VIC_CPU_BOOT_CPI		VIC_CPI_LEVEL0
-#define VIC_CPU_BOOT_ERRATA_CPI		(VIC_CPI_LEVEL0 + 8)
-
-extern asmlinkage void vic_cpi_interrupt(void);
-extern asmlinkage void vic_sys_interrupt(void);
-extern asmlinkage void vic_cmn_interrupt(void);
-extern asmlinkage void qic_timer_interrupt(void);
-extern asmlinkage void qic_invalidate_interrupt(void);
-extern asmlinkage void qic_reschedule_interrupt(void);
-extern asmlinkage void qic_enable_irq_interrupt(void);
-extern asmlinkage void qic_call_function_interrupt(void);
diff --git a/arch/x86/lguest/Kconfig b/arch/x86/lguest/Kconfig
index c70e12b1a637..8dab8f7844d3 100644
--- a/arch/x86/lguest/Kconfig
+++ b/arch/x86/lguest/Kconfig
@@ -3,7 +3,6 @@ config LGUEST_GUEST
 	select PARAVIRT
 	depends on X86_32
 	depends on !X86_PAE
-	depends on !X86_VOYAGER
 	select VIRTIO
 	select VIRTIO_RING
 	select VIRTIO_CONSOLE
diff --git a/arch/x86/mach-voyager/Makefile b/arch/x86/mach-voyager/Makefile
deleted file mode 100644
index 15c250b371d3..000000000000
--- a/arch/x86/mach-voyager/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-EXTRA_CFLAGS	:= -Iarch/x86/kernel
-obj-y			:= setup.o voyager_basic.o voyager_thread.o
-
-obj-$(CONFIG_SMP)	+= voyager_smp.o voyager_cat.o
diff --git a/arch/x86/mach-voyager/setup.c b/arch/x86/mach-voyager/setup.c
deleted file mode 100644
index 88c3c555634f..000000000000
--- a/arch/x86/mach-voyager/setup.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- *	Machine specific setup for generic
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <asm/arch_hooks.h>
-#include <asm/voyager.h>
-#include <asm/e820.h>
-#include <asm/io.h>
-#include <asm/setup.h>
-#include <asm/cpu.h>
-
-void __init pre_intr_init_hook(void)
-{
-	init_ISA_irqs();
-}
-
-/*
- * IRQ2 is cascade interrupt to second interrupt controller
- */
-static struct irqaction irq2 = {
-	.handler = no_action,
-	.mask = CPU_MASK_NONE,
-	.name = "cascade",
-};
-
-void __init intr_init_hook(void)
-{
-#ifdef CONFIG_SMP
-	voyager_smp_intr_init();
-#endif
-
-	setup_irq(2, &irq2);
-}
-
-static void voyager_disable_tsc(void)
-{
-	/* Voyagers run their CPUs from independent clocks, so disable
-	 * the TSC code because we can't sync them */
-	setup_clear_cpu_cap(X86_FEATURE_TSC);
-}
-
-void __init pre_setup_arch_hook(void)
-{
-	voyager_disable_tsc();
-}
-
-void __init pre_time_init_hook(void)
-{
-	voyager_disable_tsc();
-}
-
-void __init trap_init_hook(void)
-{
-}
-
-static struct irqaction irq0 = {
-	.handler = timer_interrupt,
-	.flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL | IRQF_TIMER,
-	.mask = CPU_MASK_NONE,
-	.name = "timer"
-};
-
-void __init time_init_hook(void)
-{
-	irq0.mask = cpumask_of_cpu(safe_smp_processor_id());
-	setup_irq(0, &irq0);
-}
-
-/* Hook for machine specific memory setup. */
-
-char *__init machine_specific_memory_setup(void)
-{
-	char *who;
-	int new_nr;
-
-	who = "NOT VOYAGER";
-
-	if (voyager_level == 5) {
-		__u32 addr, length;
-		int i;
-
-		who = "Voyager-SUS";
-
-		e820.nr_map = 0;
-		for (i = 0; voyager_memory_detect(i, &addr, &length); i++) {
-			e820_add_region(addr, length, E820_RAM);
-		}
-		return who;
-	} else if (voyager_level == 4) {
-		__u32 tom;
-		__u16 catbase = inb(VOYAGER_SSPB_RELOCATION_PORT) << 8;
-		/* select the DINO config space */
-		outb(VOYAGER_DINO, VOYAGER_CAT_CONFIG_PORT);
-		/* Read DINO top of memory register */
-		tom = ((inb(catbase + 0x4) & 0xf0) << 16)
-		    + ((inb(catbase + 0x5) & 0x7f) << 24);
-
-		if (inb(catbase) != VOYAGER_DINO) {
-			printk(KERN_ERR
-			       "Voyager: Failed to get DINO for L4, setting tom to EXT_MEM_K\n");
-			tom = (boot_params.screen_info.ext_mem_k) << 10;
-		}
-		who = "Voyager-TOM";
-		e820_add_region(0, 0x9f000, E820_RAM);
-		/* map from 1M to top of memory */
-		e820_add_region(1 * 1024 * 1024, tom - 1 * 1024 * 1024,
-				  E820_RAM);
-		/* FIXME: Should check the ASICs to see if I need to
-		 * take out the 8M window.  Just do it at the moment
-		 * */
-		e820_add_region(8 * 1024 * 1024, 8 * 1024 * 1024,
-				  E820_RESERVED);
-		return who;
-	}
-
-	return default_machine_specific_memory_setup();
-}
diff --git a/arch/x86/mach-voyager/voyager_basic.c b/arch/x86/mach-voyager/voyager_basic.c
deleted file mode 100644
index 46d6f8067690..000000000000
--- a/arch/x86/mach-voyager/voyager_basic.c
+++ /dev/null
@@ -1,317 +0,0 @@
-/* Copyright (C) 1999,2001 
- *
- * Author: J.E.J.Bottomley@HansenPartnership.com
- *
- * This file contains all the voyager specific routines for getting
- * initialisation of the architecture to function.  For additional
- * features see:
- *
- *	voyager_cat.c - Voyager CAT bus interface
- *	voyager_smp.c - Voyager SMP hal (emulates linux smp.c)
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/sched.h>
-#include <linux/ptrace.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/reboot.h>
-#include <linux/sysrq.h>
-#include <linux/smp.h>
-#include <linux/nodemask.h>
-#include <asm/io.h>
-#include <asm/voyager.h>
-#include <asm/vic.h>
-#include <linux/pm.h>
-#include <asm/tlbflush.h>
-#include <asm/arch_hooks.h>
-#include <asm/i8253.h>
-
-/*
- * Power off function, if any
- */
-void (*pm_power_off) (void);
-EXPORT_SYMBOL(pm_power_off);
-
-int voyager_level = 0;
-
-struct voyager_SUS *voyager_SUS = NULL;
-
-#ifdef CONFIG_SMP
-static void voyager_dump(int dummy1, struct tty_struct *dummy3)
-{
-	/* get here via a sysrq */
-	voyager_smp_dump();
-}
-
-static struct sysrq_key_op sysrq_voyager_dump_op = {
-	.handler = voyager_dump,
-	.help_msg = "Voyager",
-	.action_msg = "Dump Voyager Status",
-};
-#endif
-
-void voyager_detect(struct voyager_bios_info *bios)
-{
-	if (bios->len != 0xff) {
-		int class = (bios->class_1 << 8)
-		    | (bios->class_2 & 0xff);
-
-		printk("Voyager System detected.\n"
-		       "        Class %x, Revision %d.%d\n",
-		       class, bios->major, bios->minor);
-		if (class == VOYAGER_LEVEL4)
-			voyager_level = 4;
-		else if (class < VOYAGER_LEVEL5_AND_ABOVE)
-			voyager_level = 3;
-		else
-			voyager_level = 5;
-		printk("        Architecture Level %d\n", voyager_level);
-		if (voyager_level < 4)
-			printk
-			    ("\n**WARNING**: Voyager HAL only supports Levels 4 and 5 Architectures at the moment\n\n");
-		/* install the power off handler */
-		pm_power_off = voyager_power_off;
-#ifdef CONFIG_SMP
-		register_sysrq_key('v', &sysrq_voyager_dump_op);
-#endif
-	} else {
-		printk("\n\n**WARNING**: No Voyager Subsystem Found\n");
-	}
-}
-
-void voyager_system_interrupt(int cpl, void *dev_id)
-{
-	printk("Voyager: detected system interrupt\n");
-}
-
-/* Routine to read information from the extended CMOS area */
-__u8 voyager_extended_cmos_read(__u16 addr)
-{
-	outb(addr & 0xff, 0x74);
-	outb((addr >> 8) & 0xff, 0x75);
-	return inb(0x76);
-}
-
-/* internal definitions for the SUS Click Map of memory */
-
-#define CLICK_ENTRIES	16
-#define CLICK_SIZE	4096	/* click to byte conversion for Length */
-
-typedef struct ClickMap {
-	struct Entry {
-		__u32 Address;
-		__u32 Length;
-	} Entry[CLICK_ENTRIES];
-} ClickMap_t;
-
-/* This routine is pretty much an awful hack to read the bios clickmap by
- * mapping it into page 0.  There are usually three regions in the map:
- * 	Base Memory
- * 	Extended Memory
- *	zero length marker for end of map
- *
- * Returns are 0 for failure and 1 for success on extracting region.
- */
-int __init voyager_memory_detect(int region, __u32 * start, __u32 * length)
-{
-	int i;
-	int retval = 0;
-	__u8 cmos[4];
-	ClickMap_t *map;
-	unsigned long map_addr;
-	unsigned long old;
-
-	if (region >= CLICK_ENTRIES) {
-		printk("Voyager: Illegal ClickMap region %d\n", region);
-		return 0;
-	}
-
-	for (i = 0; i < sizeof(cmos); i++)
-		cmos[i] =
-		    voyager_extended_cmos_read(VOYAGER_MEMORY_CLICKMAP + i);
-
-	map_addr = *(unsigned long *)cmos;
-
-	/* steal page 0 for this */
-	old = pg0[0];
-	pg0[0] = ((map_addr & PAGE_MASK) | _PAGE_RW | _PAGE_PRESENT);
-	local_flush_tlb();
-	/* now clear everything out but page 0 */
-	map = (ClickMap_t *) (map_addr & (~PAGE_MASK));
-
-	/* zero length is the end of the clickmap */
-	if (map->Entry[region].Length != 0) {
-		*length = map->Entry[region].Length * CLICK_SIZE;
-		*start = map->Entry[region].Address;
-		retval = 1;
-	}
-
-	/* replace the mapping */
-	pg0[0] = old;
-	local_flush_tlb();
-	return retval;
-}
-
-/* voyager specific handling code for timer interrupts.  Used to hand
- * off the timer tick to the SMP code, since the VIC doesn't have an
- * internal timer (The QIC does, but that's another story). */
-void voyager_timer_interrupt(void)
-{
-	if ((jiffies & 0x3ff) == 0) {
-
-		/* There seems to be something flaky in either
-		 * hardware or software that is resetting the timer 0
-		 * count to something much higher than it should be
-		 * This seems to occur in the boot sequence, just
-		 * before root is mounted.  Therefore, every 10
-		 * seconds or so, we sanity check the timer zero count
-		 * and kick it back to where it should be.
-		 *
-		 * FIXME: This is the most awful hack yet seen.  I
-		 * should work out exactly what is interfering with
-		 * the timer count settings early in the boot sequence
-		 * and swiftly introduce it to something sharp and
-		 * pointy.  */
-		__u16 val;
-
-		spin_lock(&i8253_lock);
-
-		outb_p(0x00, 0x43);
-		val = inb_p(0x40);
-		val |= inb(0x40) << 8;
-		spin_unlock(&i8253_lock);
-
-		if (val > LATCH) {
-			printk
-			    ("\nVOYAGER: countdown timer value too high (%d), resetting\n\n",
-			     val);
-			spin_lock(&i8253_lock);
-			outb(0x34, 0x43);
-			outb_p(LATCH & 0xff, 0x40);	/* LSB */
-			outb(LATCH >> 8, 0x40);	/* MSB */
-			spin_unlock(&i8253_lock);
-		}
-	}
-#ifdef CONFIG_SMP
-	smp_vic_timer_interrupt();
-#endif
-}
-
-void voyager_power_off(void)
-{
-	printk("VOYAGER Power Off\n");
-
-	if (voyager_level == 5) {
-		voyager_cat_power_off();
-	} else if (voyager_level == 4) {
-		/* This doesn't apparently work on most L4 machines,
-		 * but the specs say to do this to get automatic power
-		 * off.  Unfortunately, if it doesn't power off the
-		 * machine, it ends up doing a cold restart, which
-		 * isn't really intended, so comment out the code */
-#if 0
-		int port;
-
-		/* enable the voyager Configuration Space */
-		outb((inb(VOYAGER_MC_SETUP) & 0xf0) | 0x8, VOYAGER_MC_SETUP);
-		/* the port for the power off flag is an offset from the
-		   floating base */
-		port = (inb(VOYAGER_SSPB_RELOCATION_PORT) << 8) + 0x21;
-		/* set the power off flag */
-		outb(inb(port) | 0x1, port);
-#endif
-	}
-	/* and wait for it to happen */
-	local_irq_disable();
-	for (;;)
-		halt();
-}
-
-/* copied from process.c */
-static inline void kb_wait(void)
-{
-	int i;
-
-	for (i = 0; i < 0x10000; i++)
-		if ((inb_p(0x64) & 0x02) == 0)
-			break;
-}
-
-void machine_shutdown(void)
-{
-	/* Architecture specific shutdown needed before a kexec */
-}
-
-void machine_restart(char *cmd)
-{
-	printk("Voyager Warm Restart\n");
-	kb_wait();
-
-	if (voyager_level == 5) {
-		/* write magic values to the RTC to inform system that
-		 * shutdown is beginning */
-		outb(0x8f, 0x70);
-		outb(0x5, 0x71);
-
-		udelay(50);
-		outb(0xfe, 0x64);	/* pull reset low */
-	} else if (voyager_level == 4) {
-		__u16 catbase = inb(VOYAGER_SSPB_RELOCATION_PORT) << 8;
-		__u8 basebd = inb(VOYAGER_MC_SETUP);
-
-		outb(basebd | 0x08, VOYAGER_MC_SETUP);
-		outb(0x02, catbase + 0x21);
-	}
-	local_irq_disable();
-	for (;;)
-		halt();
-}
-
-void machine_emergency_restart(void)
-{
-	/*for now, just hook this to a warm restart */
-	machine_restart(NULL);
-}
-
-void mca_nmi_hook(void)
-{
-	__u8 dumpval __maybe_unused = inb(0xf823);
-	__u8 swnmi __maybe_unused = inb(0xf813);
-
-	/* FIXME: assume dump switch pressed */
-	/* check to see if the dump switch was pressed */
-	VDEBUG(("VOYAGER: dumpval = 0x%x, swnmi = 0x%x\n", dumpval, swnmi));
-	/* clear swnmi */
-	outb(0xff, 0xf813);
-	/* tell SUS to ignore dump */
-	if (voyager_level == 5 && voyager_SUS != NULL) {
-		if (voyager_SUS->SUS_mbox == VOYAGER_DUMP_BUTTON_NMI) {
-			voyager_SUS->kernel_mbox = VOYAGER_NO_COMMAND;
-			voyager_SUS->kernel_flags |= VOYAGER_OS_IN_PROGRESS;
-			udelay(1000);
-			voyager_SUS->kernel_mbox = VOYAGER_IGNORE_DUMP;
-			voyager_SUS->kernel_flags &= ~VOYAGER_OS_IN_PROGRESS;
-		}
-	}
-	printk(KERN_ERR
-	       "VOYAGER: Dump switch pressed, printing CPU%d tracebacks\n",
-	       smp_processor_id());
-	show_stack(NULL, NULL);
-	show_state();
-}
-
-void machine_halt(void)
-{
-	/* treat a halt like a power off */
-	machine_power_off();
-}
-
-void machine_power_off(void)
-{
-	if (pm_power_off)
-		pm_power_off();
-}
diff --git a/arch/x86/mach-voyager/voyager_cat.c b/arch/x86/mach-voyager/voyager_cat.c
deleted file mode 100644
index 2ad598c104af..000000000000
--- a/arch/x86/mach-voyager/voyager_cat.c
+++ /dev/null
@@ -1,1197 +0,0 @@
-/* -*- mode: c; c-basic-offset: 8 -*- */
-
-/* Copyright (C) 1999,2001
- *
- * Author: J.E.J.Bottomley@HansenPartnership.com
- *
- * This file contains all the logic for manipulating the CAT bus
- * in a level 5 machine.
- *
- * The CAT bus is a serial configuration and test bus.  Its primary
- * uses are to probe the initial configuration of the system and to
- * diagnose error conditions when a system interrupt occurs.  The low
- * level interface is fairly primitive, so most of this file consists
- * of bit shift manipulations to send and receive packets on the
- * serial bus */
-
-#include <linux/types.h>
-#include <linux/completion.h>
-#include <linux/sched.h>
-#include <asm/voyager.h>
-#include <asm/vic.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <asm/io.h>
-
-#ifdef VOYAGER_CAT_DEBUG
-#define CDEBUG(x)	printk x
-#else
-#define CDEBUG(x)
-#endif
-
-/* the CAT command port */
-#define CAT_CMD		(sspb + 0xe)
-/* the CAT data port */
-#define CAT_DATA	(sspb + 0xd)
-
-/* the internal cat functions */
-static void cat_pack(__u8 * msg, __u16 start_bit, __u8 * data, __u16 num_bits);
-static void cat_unpack(__u8 * msg, __u16 start_bit, __u8 * data,
-		       __u16 num_bits);
-static void cat_build_header(__u8 * header, const __u16 len,
-			     const __u16 smallest_reg_bits,
-			     const __u16 longest_reg_bits);
-static int cat_sendinst(voyager_module_t * modp, voyager_asic_t * asicp,
-			__u8 reg, __u8 op);
-static int cat_getdata(voyager_module_t * modp, voyager_asic_t * asicp,
-		       __u8 reg, __u8 * value);
-static int cat_shiftout(__u8 * data, __u16 data_bytes, __u16 header_bytes,
-			__u8 pad_bits);
-static int cat_write(voyager_module_t * modp, voyager_asic_t * asicp, __u8 reg,
-		     __u8 value);
-static int cat_read(voyager_module_t * modp, voyager_asic_t * asicp, __u8 reg,
-		    __u8 * value);
-static int cat_subread(voyager_module_t * modp, voyager_asic_t * asicp,
-		       __u16 offset, __u16 len, void *buf);
-static int cat_senddata(voyager_module_t * modp, voyager_asic_t * asicp,
-			__u8 reg, __u8 value);
-static int cat_disconnect(voyager_module_t * modp, voyager_asic_t * asicp);
-static int cat_connect(voyager_module_t * modp, voyager_asic_t * asicp);
-
-static inline const char *cat_module_name(int module_id)
-{
-	switch (module_id) {
-	case 0x10:
-		return "Processor Slot 0";
-	case 0x11:
-		return "Processor Slot 1";
-	case 0x12:
-		return "Processor Slot 2";
-	case 0x13:
-		return "Processor Slot 4";
-	case 0x14:
-		return "Memory Slot 0";
-	case 0x15:
-		return "Memory Slot 1";
-	case 0x18:
-		return "Primary Microchannel";
-	case 0x19:
-		return "Secondary Microchannel";
-	case 0x1a:
-		return "Power Supply Interface";
-	case 0x1c:
-		return "Processor Slot 5";
-	case 0x1d:
-		return "Processor Slot 6";
-	case 0x1e:
-		return "Processor Slot 7";
-	case 0x1f:
-		return "Processor Slot 8";
-	default:
-		return "Unknown Module";
-	}
-}
-
-static int sspb = 0;		/* stores the super port location */
-int voyager_8slot = 0;		/* set to true if a 51xx monster */
-
-voyager_module_t *voyager_cat_list;
-
-/* the I/O port assignments for the VIC and QIC */
-static struct resource vic_res = {
-	.name = "Voyager Interrupt Controller",
-	.start = 0xFC00,
-	.end = 0xFC6F
-};
-static struct resource qic_res = {
-	.name = "Quad Interrupt Controller",
-	.start = 0xFC70,
-	.end = 0xFCFF
-};
-
-/* This function is used to pack a data bit stream inside a message.
- * It writes num_bits of the data buffer in msg starting at start_bit.
- * Note: This function assumes that any unused bit in the data stream
- * is set to zero so that the ors will work correctly */
-static void
-cat_pack(__u8 * msg, const __u16 start_bit, __u8 * data, const __u16 num_bits)
-{
-	/* compute initial shift needed */
-	const __u16 offset = start_bit % BITS_PER_BYTE;
-	__u16 len = num_bits / BITS_PER_BYTE;
-	__u16 byte = start_bit / BITS_PER_BYTE;
-	__u16 residue = (num_bits % BITS_PER_BYTE) + offset;
-	int i;
-
-	/* adjust if we have more than a byte of residue */
-	if (residue >= BITS_PER_BYTE) {
-		residue -= BITS_PER_BYTE;
-		len++;
-	}
-
-	/* clear out the bits.  We assume here that if len==0 then
-	 * residue >= offset.  This is always true for the catbus
-	 * operations */
-	msg[byte] &= 0xff << (BITS_PER_BYTE - offset);
-	msg[byte++] |= data[0] >> offset;
-	if (len == 0)
-		return;
-	for (i = 1; i < len; i++)
-		msg[byte++] = (data[i - 1] << (BITS_PER_BYTE - offset))
-		    | (data[i] >> offset);
-	if (residue != 0) {
-		__u8 mask = 0xff >> residue;
-		__u8 last_byte = data[i - 1] << (BITS_PER_BYTE - offset)
-		    | (data[i] >> offset);
-
-		last_byte &= ~mask;
-		msg[byte] &= mask;
-		msg[byte] |= last_byte;
-	}
-	return;
-}
-
-/* unpack the data again (same arguments as cat_pack()). data buffer
- * must be zero populated.
- *
- * Function: given a message string move to start_bit and copy num_bits into
- * data (starting at bit 0 in data).
- */
-static void
-cat_unpack(__u8 * msg, const __u16 start_bit, __u8 * data, const __u16 num_bits)
-{
-	/* compute initial shift needed */
-	const __u16 offset = start_bit % BITS_PER_BYTE;
-	__u16 len = num_bits / BITS_PER_BYTE;
-	const __u8 last_bits = num_bits % BITS_PER_BYTE;
-	__u16 byte = start_bit / BITS_PER_BYTE;
-	int i;
-
-	if (last_bits != 0)
-		len++;
-
-	/* special case: want < 8 bits from msg and we can get it from
-	 * a single byte of the msg */
-	if (len == 0 && BITS_PER_BYTE - offset >= num_bits) {
-		data[0] = msg[byte] << offset;
-		data[0] &= 0xff >> (BITS_PER_BYTE - num_bits);
-		return;
-	}
-	for (i = 0; i < len; i++) {
-		/* this annoying if has to be done just in case a read of
-		 * msg one beyond the array causes a panic */
-		if (offset != 0) {
-			data[i] = msg[byte++] << offset;
-			data[i] |= msg[byte] >> (BITS_PER_BYTE - offset);
-		} else {
-			data[i] = msg[byte++];
-		}
-	}
-	/* do we need to truncate the final byte */
-	if (last_bits != 0) {
-		data[i - 1] &= 0xff << (BITS_PER_BYTE - last_bits);
-	}
-	return;
-}
-
-static void
-cat_build_header(__u8 * header, const __u16 len, const __u16 smallest_reg_bits,
-		 const __u16 longest_reg_bits)
-{
-	int i;
-	__u16 start_bit = (smallest_reg_bits - 1) % BITS_PER_BYTE;
-	__u8 *last_byte = &header[len - 1];
-
-	if (start_bit == 0)
-		start_bit = 1;	/* must have at least one bit in the hdr */
-
-	for (i = 0; i < len; i++)
-		header[i] = 0;
-
-	for (i = start_bit; i > 0; i--)
-		*last_byte = ((*last_byte) << 1) + 1;
-
-}
-
-static int
-cat_sendinst(voyager_module_t * modp, voyager_asic_t * asicp, __u8 reg, __u8 op)
-{
-	__u8 parity, inst, inst_buf[4] = { 0 };
-	__u8 iseq[VOYAGER_MAX_SCAN_PATH], hseq[VOYAGER_MAX_REG_SIZE];
-	__u16 ibytes, hbytes, padbits;
-	int i;
-
-	/* 
-	 * Parity is the parity of the register number + 1 (READ_REGISTER
-	 * and WRITE_REGISTER always add '1' to the number of bits == 1)
-	 */
-	parity = (__u8) (1 + (reg & 0x01) +
-			 ((__u8) (reg & 0x02) >> 1) +
-			 ((__u8) (reg & 0x04) >> 2) +
-			 ((__u8) (reg & 0x08) >> 3)) % 2;
-
-	inst = ((parity << 7) | (reg << 2) | op);
-
-	outb(VOYAGER_CAT_IRCYC, CAT_CMD);
-	if (!modp->scan_path_connected) {
-		if (asicp->asic_id != VOYAGER_CAT_ID) {
-			printk
-			    ("**WARNING***: cat_sendinst has disconnected scan path not to CAT asic\n");
-			return 1;
-		}
-		outb(VOYAGER_CAT_HEADER, CAT_DATA);
-		outb(inst, CAT_DATA);
-		if (inb(CAT_DATA) != VOYAGER_CAT_HEADER) {
-			CDEBUG(("VOYAGER CAT: cat_sendinst failed to get CAT_HEADER\n"));
-			return 1;
-		}
-		return 0;
-	}
-	ibytes = modp->inst_bits / BITS_PER_BYTE;
-	if ((padbits = modp->inst_bits % BITS_PER_BYTE) != 0) {
-		padbits = BITS_PER_BYTE - padbits;
-		ibytes++;
-	}
-	hbytes = modp->largest_reg / BITS_PER_BYTE;
-	if (modp->largest_reg % BITS_PER_BYTE)
-		hbytes++;
-	CDEBUG(("cat_sendinst: ibytes=%d, hbytes=%d\n", ibytes, hbytes));
-	/* initialise the instruction sequence to 0xff */
-	for (i = 0; i < ibytes + hbytes; i++)
-		iseq[i] = 0xff;
-	cat_build_header(hseq, hbytes, modp->smallest_reg, modp->largest_reg);
-	cat_pack(iseq, modp->inst_bits, hseq, hbytes * BITS_PER_BYTE);
-	inst_buf[0] = inst;
-	inst_buf[1] = 0xFF >> (modp->largest_reg % BITS_PER_BYTE);
-	cat_pack(iseq, asicp->bit_location, inst_buf, asicp->ireg_length);
-#ifdef VOYAGER_CAT_DEBUG
-	printk("ins = 0x%x, iseq: ", inst);
-	for (i = 0; i < ibytes + hbytes; i++)
-		printk("0x%x ", iseq[i]);
-	printk("\n");
-#endif
-	if (cat_shiftout(iseq, ibytes, hbytes, padbits)) {
-		CDEBUG(("VOYAGER CAT: cat_sendinst: cat_shiftout failed\n"));
-		return 1;
-	}
-	CDEBUG(("CAT SHIFTOUT DONE\n"));
-	return 0;
-}
-
-static int
-cat_getdata(voyager_module_t * modp, voyager_asic_t * asicp, __u8 reg,
-	    __u8 * value)
-{
-	if (!modp->scan_path_connected) {
-		if (asicp->asic_id != VOYAGER_CAT_ID) {
-			CDEBUG(("VOYAGER CAT: ERROR: cat_getdata to CAT asic with scan path connected\n"));
-			return 1;
-		}
-		if (reg > VOYAGER_SUBADDRHI)
-			outb(VOYAGER_CAT_RUN, CAT_CMD);
-		outb(VOYAGER_CAT_DRCYC, CAT_CMD);
-		outb(VOYAGER_CAT_HEADER, CAT_DATA);
-		*value = inb(CAT_DATA);
-		outb(0xAA, CAT_DATA);
-		if (inb(CAT_DATA) != VOYAGER_CAT_HEADER) {
-			CDEBUG(("cat_getdata: failed to get VOYAGER_CAT_HEADER\n"));
-			return 1;
-		}
-		return 0;
-	} else {
-		__u16 sbits = modp->num_asics - 1 + asicp->ireg_length;
-		__u16 sbytes = sbits / BITS_PER_BYTE;
-		__u16 tbytes;
-		__u8 string[VOYAGER_MAX_SCAN_PATH],
-		    trailer[VOYAGER_MAX_REG_SIZE];
-		__u8 padbits;
-		int i;
-
-		outb(VOYAGER_CAT_DRCYC, CAT_CMD);
-
-		if ((padbits = sbits % BITS_PER_BYTE) != 0) {
-			padbits = BITS_PER_BYTE - padbits;
-			sbytes++;
-		}
-		tbytes = asicp->ireg_length / BITS_PER_BYTE;
-		if (asicp->ireg_length % BITS_PER_BYTE)
-			tbytes++;
-		CDEBUG(("cat_getdata: tbytes = %d, sbytes = %d, padbits = %d\n",
-			tbytes, sbytes, padbits));
-		cat_build_header(trailer, tbytes, 1, asicp->ireg_length);
-
-		for (i = tbytes - 1; i >= 0; i--) {
-			outb(trailer[i], CAT_DATA);
-			string[sbytes + i] = inb(CAT_DATA);
-		}
-
-		for (i = sbytes - 1; i >= 0; i--) {
-			outb(0xaa, CAT_DATA);
-			string[i] = inb(CAT_DATA);
-		}
-		*value = 0;
-		cat_unpack(string,
-			   padbits + (tbytes * BITS_PER_BYTE) +
-			   asicp->asic_location, value, asicp->ireg_length);
-#ifdef VOYAGER_CAT_DEBUG
-		printk("value=0x%x, string: ", *value);
-		for (i = 0; i < tbytes + sbytes; i++)
-			printk("0x%x ", string[i]);
-		printk("\n");
-#endif
-
-		/* sanity check the rest of the return */
-		for (i = 0; i < tbytes; i++) {
-			__u8 input = 0;
-
-			cat_unpack(string, padbits + (i * BITS_PER_BYTE),
-				   &input, BITS_PER_BYTE);
-			if (trailer[i] != input) {
-				CDEBUG(("cat_getdata: failed to sanity check rest of ret(%d) 0x%x != 0x%x\n", i, input, trailer[i]));
-				return 1;
-			}
-		}
-		CDEBUG(("cat_getdata DONE\n"));
-		return 0;
-	}
-}
-
-static int
-cat_shiftout(__u8 * data, __u16 data_bytes, __u16 header_bytes, __u8 pad_bits)
-{
-	int i;
-
-	for (i = data_bytes + header_bytes - 1; i >= header_bytes; i--)
-		outb(data[i], CAT_DATA);
-
-	for (i = header_bytes - 1; i >= 0; i--) {
-		__u8 header = 0;
-		__u8 input;
-
-		outb(data[i], CAT_DATA);
-		input = inb(CAT_DATA);
-		CDEBUG(("cat_shiftout: returned 0x%x\n", input));
-		cat_unpack(data, ((data_bytes + i) * BITS_PER_BYTE) - pad_bits,
-			   &header, BITS_PER_BYTE);
-		if (input != header) {
-			CDEBUG(("VOYAGER CAT: cat_shiftout failed to return header 0x%x != 0x%x\n", input, header));
-			return 1;
-		}
-	}
-	return 0;
-}
-
-static int
-cat_senddata(voyager_module_t * modp, voyager_asic_t * asicp,
-	     __u8 reg, __u8 value)
-{
-	outb(VOYAGER_CAT_DRCYC, CAT_CMD);
-	if (!modp->scan_path_connected) {
-		if (asicp->asic_id != VOYAGER_CAT_ID) {
-			CDEBUG(("VOYAGER CAT: ERROR: scan path disconnected when asic != CAT\n"));
-			return 1;
-		}
-		outb(VOYAGER_CAT_HEADER, CAT_DATA);
-		outb(value, CAT_DATA);
-		if (inb(CAT_DATA) != VOYAGER_CAT_HEADER) {
-			CDEBUG(("cat_senddata: failed to get correct header response to sent data\n"));
-			return 1;
-		}
-		if (reg > VOYAGER_SUBADDRHI) {
-			outb(VOYAGER_CAT_RUN, CAT_CMD);
-			outb(VOYAGER_CAT_END, CAT_CMD);
-			outb(VOYAGER_CAT_RUN, CAT_CMD);
-		}
-
-		return 0;
-	} else {
-		__u16 hbytes = asicp->ireg_length / BITS_PER_BYTE;
-		__u16 dbytes =
-		    (modp->num_asics - 1 + asicp->ireg_length) / BITS_PER_BYTE;
-		__u8 padbits, dseq[VOYAGER_MAX_SCAN_PATH],
-		    hseq[VOYAGER_MAX_REG_SIZE];
-		int i;
-
-		if ((padbits = (modp->num_asics - 1
-				+ asicp->ireg_length) % BITS_PER_BYTE) != 0) {
-			padbits = BITS_PER_BYTE - padbits;
-			dbytes++;
-		}
-		if (asicp->ireg_length % BITS_PER_BYTE)
-			hbytes++;
-
-		cat_build_header(hseq, hbytes, 1, asicp->ireg_length);
-
-		for (i = 0; i < dbytes + hbytes; i++)
-			dseq[i] = 0xff;
-		CDEBUG(("cat_senddata: dbytes=%d, hbytes=%d, padbits=%d\n",
-			dbytes, hbytes, padbits));
-		cat_pack(dseq, modp->num_asics - 1 + asicp->ireg_length,
-			 hseq, hbytes * BITS_PER_BYTE);
-		cat_pack(dseq, asicp->asic_location, &value,
-			 asicp->ireg_length);
-#ifdef VOYAGER_CAT_DEBUG
-		printk("dseq ");
-		for (i = 0; i < hbytes + dbytes; i++) {
-			printk("0x%x ", dseq[i]);
-		}
-		printk("\n");
-#endif
-		return cat_shiftout(dseq, dbytes, hbytes, padbits);
-	}
-}
-
-static int
-cat_write(voyager_module_t * modp, voyager_asic_t * asicp, __u8 reg, __u8 value)
-{
-	if (cat_sendinst(modp, asicp, reg, VOYAGER_WRITE_CONFIG))
-		return 1;
-	return cat_senddata(modp, asicp, reg, value);
-}
-
-static int
-cat_read(voyager_module_t * modp, voyager_asic_t * asicp, __u8 reg,
-	 __u8 * value)
-{
-	if (cat_sendinst(modp, asicp, reg, VOYAGER_READ_CONFIG))
-		return 1;
-	return cat_getdata(modp, asicp, reg, value);
-}
-
-static int
-cat_subaddrsetup(voyager_module_t * modp, voyager_asic_t * asicp, __u16 offset,
-		 __u16 len)
-{
-	__u8 val;
-
-	if (len > 1) {
-		/* set auto increment */
-		__u8 newval;
-
-		if (cat_read(modp, asicp, VOYAGER_AUTO_INC_REG, &val)) {
-			CDEBUG(("cat_subaddrsetup: read of VOYAGER_AUTO_INC_REG failed\n"));
-			return 1;
-		}
-		CDEBUG(("cat_subaddrsetup: VOYAGER_AUTO_INC_REG = 0x%x\n",
-			val));
-		newval = val | VOYAGER_AUTO_INC;
-		if (newval != val) {
-			if (cat_write(modp, asicp, VOYAGER_AUTO_INC_REG, val)) {
-				CDEBUG(("cat_subaddrsetup: write to VOYAGER_AUTO_INC_REG failed\n"));
-				return 1;
-			}
-		}
-	}
-	if (cat_write(modp, asicp, VOYAGER_SUBADDRLO, (__u8) (offset & 0xff))) {
-		CDEBUG(("cat_subaddrsetup: write to SUBADDRLO failed\n"));
-		return 1;
-	}
-	if (asicp->subaddr > VOYAGER_SUBADDR_LO) {
-		if (cat_write
-		    (modp, asicp, VOYAGER_SUBADDRHI, (__u8) (offset >> 8))) {
-			CDEBUG(("cat_subaddrsetup: write to SUBADDRHI failed\n"));
-			return 1;
-		}
-		cat_read(modp, asicp, VOYAGER_SUBADDRHI, &val);
-		CDEBUG(("cat_subaddrsetup: offset = %d, hi = %d\n", offset,
-			val));
-	}
-	cat_read(modp, asicp, VOYAGER_SUBADDRLO, &val);
-	CDEBUG(("cat_subaddrsetup: offset = %d, lo = %d\n", offset, val));
-	return 0;
-}
-
-static int
-cat_subwrite(voyager_module_t * modp, voyager_asic_t * asicp, __u16 offset,
-	     __u16 len, void *buf)
-{
-	int i, retval;
-
-	/* FIXME: need special actions for VOYAGER_CAT_ID here */
-	if (asicp->asic_id == VOYAGER_CAT_ID) {
-		CDEBUG(("cat_subwrite: ATTEMPT TO WRITE TO CAT ASIC\n"));
-		/* FIXME -- This is supposed to be handled better
-		 * There is a problem writing to the cat asic in the
-		 * PSI.  The 30us delay seems to work, though */
-		udelay(30);
-	}
-
-	if ((retval = cat_subaddrsetup(modp, asicp, offset, len)) != 0) {
-		printk("cat_subwrite: cat_subaddrsetup FAILED\n");
-		return retval;
-	}
-
-	if (cat_sendinst
-	    (modp, asicp, VOYAGER_SUBADDRDATA, VOYAGER_WRITE_CONFIG)) {
-		printk("cat_subwrite: cat_sendinst FAILED\n");
-		return 1;
-	}
-	for (i = 0; i < len; i++) {
-		if (cat_senddata(modp, asicp, 0xFF, ((__u8 *) buf)[i])) {
-			printk
-			    ("cat_subwrite: cat_sendata element at %d FAILED\n",
-			     i);
-			return 1;
-		}
-	}
-	return 0;
-}
-static int
-cat_subread(voyager_module_t * modp, voyager_asic_t * asicp, __u16 offset,
-	    __u16 len, void *buf)
-{
-	int i, retval;
-
-	if ((retval = cat_subaddrsetup(modp, asicp, offset, len)) != 0) {
-		CDEBUG(("cat_subread: cat_subaddrsetup FAILED\n"));
-		return retval;
-	}
-
-	if (cat_sendinst(modp, asicp, VOYAGER_SUBADDRDATA, VOYAGER_READ_CONFIG)) {
-		CDEBUG(("cat_subread: cat_sendinst failed\n"));
-		return 1;
-	}
-	for (i = 0; i < len; i++) {
-		if (cat_getdata(modp, asicp, 0xFF, &((__u8 *) buf)[i])) {
-			CDEBUG(("cat_subread: cat_getdata element %d failed\n",
-				i));
-			return 1;
-		}
-	}
-	return 0;
-}
-
-/* buffer for storing EPROM data read in during initialisation */
-static __initdata __u8 eprom_buf[0xFFFF];
-static voyager_module_t *voyager_initial_module;
-
-/* Initialise the cat bus components.  We assume this is called by the
- * boot cpu *after* all memory initialisation has been done (so we can
- * use kmalloc) but before smp initialisation, so we can probe the SMP
- * configuration and pick up necessary information.  */
-void __init voyager_cat_init(void)
-{
-	voyager_module_t **modpp = &voyager_initial_module;
-	voyager_asic_t **asicpp;
-	voyager_asic_t *qabc_asic = NULL;
-	int i, j;
-	unsigned long qic_addr = 0;
-	__u8 qabc_data[0x20];
-	__u8 num_submodules, val;
-	voyager_eprom_hdr_t *eprom_hdr = (voyager_eprom_hdr_t *) & eprom_buf[0];
-
-	__u8 cmos[4];
-	unsigned long addr;
-
-	/* initiallise the SUS mailbox */
-	for (i = 0; i < sizeof(cmos); i++)
-		cmos[i] = voyager_extended_cmos_read(VOYAGER_DUMP_LOCATION + i);
-	addr = *(unsigned long *)cmos;
-	if ((addr & 0xff000000) != 0xff000000) {
-		printk(KERN_ERR
-		       "Voyager failed to get SUS mailbox (addr = 0x%lx\n",
-		       addr);
-	} else {
-		static struct resource res;
-
-		res.name = "voyager SUS";
-		res.start = addr;
-		res.end = addr + 0x3ff;
-
-		request_resource(&iomem_resource, &res);
-		voyager_SUS = (struct voyager_SUS *)
-		    ioremap(addr, 0x400);
-		printk(KERN_NOTICE "Voyager SUS mailbox version 0x%x\n",
-		       voyager_SUS->SUS_version);
-		voyager_SUS->kernel_version = VOYAGER_MAILBOX_VERSION;
-		voyager_SUS->kernel_flags = VOYAGER_OS_HAS_SYSINT;
-	}
-
-	/* clear the processor counts */
-	voyager_extended_vic_processors = 0;
-	voyager_quad_processors = 0;
-
-	printk("VOYAGER: beginning CAT bus probe\n");
-	/* set up the SuperSet Port Block which tells us where the
-	 * CAT communication port is */
-	sspb = inb(VOYAGER_SSPB_RELOCATION_PORT) * 0x100;
-	VDEBUG(("VOYAGER DEBUG: sspb = 0x%x\n", sspb));
-
-	/* now find out if were 8 slot or normal */
-	if ((inb(VIC_PROC_WHO_AM_I) & EIGHT_SLOT_IDENTIFIER)
-	    == EIGHT_SLOT_IDENTIFIER) {
-		voyager_8slot = 1;
-		printk(KERN_NOTICE
-		       "Voyager: Eight slot 51xx configuration detected\n");
-	}
-
-	for (i = VOYAGER_MIN_MODULE; i <= VOYAGER_MAX_MODULE; i++) {
-		__u8 input;
-		int asic;
-		__u16 eprom_size;
-		__u16 sp_offset;
-
-		outb(VOYAGER_CAT_DESELECT, VOYAGER_CAT_CONFIG_PORT);
-		outb(i, VOYAGER_CAT_CONFIG_PORT);
-
-		/* check the presence of the module */
-		outb(VOYAGER_CAT_RUN, CAT_CMD);
-		outb(VOYAGER_CAT_IRCYC, CAT_CMD);
-		outb(VOYAGER_CAT_HEADER, CAT_DATA);
-		/* stream series of alternating 1's and 0's to stimulate
-		 * response */
-		outb(0xAA, CAT_DATA);
-		input = inb(CAT_DATA);
-		outb(VOYAGER_CAT_END, CAT_CMD);
-		if (input != VOYAGER_CAT_HEADER) {
-			continue;
-		}
-		CDEBUG(("VOYAGER DEBUG: found module id 0x%x, %s\n", i,
-			cat_module_name(i)));
-		*modpp = kmalloc(sizeof(voyager_module_t), GFP_KERNEL);	/*&voyager_module_storage[cat_count++]; */
-		if (*modpp == NULL) {
-			printk("**WARNING** kmalloc failure in cat_init\n");
-			continue;
-		}
-		memset(*modpp, 0, sizeof(voyager_module_t));
-		/* need temporary asic for cat_subread.  It will be
-		 * filled in correctly later */
-		(*modpp)->asic = kmalloc(sizeof(voyager_asic_t), GFP_KERNEL);	/*&voyager_asic_storage[asic_count]; */
-		if ((*modpp)->asic == NULL) {
-			printk("**WARNING** kmalloc failure in cat_init\n");
-			continue;
-		}
-		memset((*modpp)->asic, 0, sizeof(voyager_asic_t));
-		(*modpp)->asic->asic_id = VOYAGER_CAT_ID;
-		(*modpp)->asic->subaddr = VOYAGER_SUBADDR_HI;
-		(*modpp)->module_addr = i;
-		(*modpp)->scan_path_connected = 0;
-		if (i == VOYAGER_PSI) {
-			/* Exception leg for modules with no EEPROM */
-			printk("Module \"%s\"\n", cat_module_name(i));
-			continue;
-		}
-
-		CDEBUG(("cat_init: Reading eeprom for module 0x%x at offset %d\n", i, VOYAGER_XSUM_END_OFFSET));
-		outb(VOYAGER_CAT_RUN, CAT_CMD);
-		cat_disconnect(*modpp, (*modpp)->asic);
-		if (cat_subread(*modpp, (*modpp)->asic,
-				VOYAGER_XSUM_END_OFFSET, sizeof(eprom_size),
-				&eprom_size)) {
-			printk
-			    ("**WARNING**: Voyager couldn't read EPROM size for module 0x%x\n",
-			     i);
-			outb(VOYAGER_CAT_END, CAT_CMD);
-			continue;
-		}
-		if (eprom_size > sizeof(eprom_buf)) {
-			printk
-			    ("**WARNING**: Voyager insufficient size to read EPROM data, module 0x%x.  Need %d\n",
-			     i, eprom_size);
-			outb(VOYAGER_CAT_END, CAT_CMD);
-			continue;
-		}
-		outb(VOYAGER_CAT_END, CAT_CMD);
-		outb(VOYAGER_CAT_RUN, CAT_CMD);
-		CDEBUG(("cat_init: module 0x%x, eeprom_size %d\n", i,
-			eprom_size));
-		if (cat_subread
-		    (*modpp, (*modpp)->asic, 0, eprom_size, eprom_buf)) {
-			outb(VOYAGER_CAT_END, CAT_CMD);
-			continue;
-		}
-		outb(VOYAGER_CAT_END, CAT_CMD);
-		printk("Module \"%s\", version 0x%x, tracer 0x%x, asics %d\n",
-		       cat_module_name(i), eprom_hdr->version_id,
-		       *((__u32 *) eprom_hdr->tracer), eprom_hdr->num_asics);
-		(*modpp)->ee_size = eprom_hdr->ee_size;
-		(*modpp)->num_asics = eprom_hdr->num_asics;
-		asicpp = &((*modpp)->asic);
-		sp_offset = eprom_hdr->scan_path_offset;
-		/* All we really care about are the Quad cards.  We
-		 * identify them because they are in a processor slot
-		 * and have only four asics */
-		if ((i < 0x10 || (i >= 0x14 && i < 0x1c) || i > 0x1f)) {
-			modpp = &((*modpp)->next);
-			continue;
-		}
-		/* Now we know it's in a processor slot, does it have
-		 * a quad baseboard submodule */
-		outb(VOYAGER_CAT_RUN, CAT_CMD);
-		cat_read(*modpp, (*modpp)->asic, VOYAGER_SUBMODPRESENT,
-			 &num_submodules);
-		/* lowest two bits, active low */
-		num_submodules = ~(0xfc | num_submodules);
-		CDEBUG(("VOYAGER CAT: %d submodules present\n",
-			num_submodules));
-		if (num_submodules == 0) {
-			/* fill in the dyadic extended processors */
-			__u8 cpu = i & 0x07;
-
-			printk("Module \"%s\": Dyadic Processor Card\n",
-			       cat_module_name(i));
-			voyager_extended_vic_processors |= (1 << cpu);
-			cpu += 4;
-			voyager_extended_vic_processors |= (1 << cpu);
-			outb(VOYAGER_CAT_END, CAT_CMD);
-			continue;
-		}
-
-		/* now we want to read the asics on the first submodule,
-		 * which should be the quad base board */
-
-		cat_read(*modpp, (*modpp)->asic, VOYAGER_SUBMODSELECT, &val);
-		CDEBUG(("cat_init: SUBMODSELECT value = 0x%x\n", val));
-		val = (val & 0x7c) | VOYAGER_QUAD_BASEBOARD;
-		cat_write(*modpp, (*modpp)->asic, VOYAGER_SUBMODSELECT, val);
-
-		outb(VOYAGER_CAT_END, CAT_CMD);
-
-		CDEBUG(("cat_init: Reading eeprom for module 0x%x at offset %d\n", i, VOYAGER_XSUM_END_OFFSET));
-		outb(VOYAGER_CAT_RUN, CAT_CMD);
-		cat_disconnect(*modpp, (*modpp)->asic);
-		if (cat_subread(*modpp, (*modpp)->asic,
-				VOYAGER_XSUM_END_OFFSET, sizeof(eprom_size),
-				&eprom_size)) {
-			printk
-			    ("**WARNING**: Voyager couldn't read EPROM size for module 0x%x\n",
-			     i);
-			outb(VOYAGER_CAT_END, CAT_CMD);
-			continue;
-		}
-		if (eprom_size > sizeof(eprom_buf)) {
-			printk
-			    ("**WARNING**: Voyager insufficient size to read EPROM data, module 0x%x.  Need %d\n",
-			     i, eprom_size);
-			outb(VOYAGER_CAT_END, CAT_CMD);
-			continue;
-		}
-		outb(VOYAGER_CAT_END, CAT_CMD);
-		outb(VOYAGER_CAT_RUN, CAT_CMD);
-		CDEBUG(("cat_init: module 0x%x, eeprom_size %d\n", i,
-			eprom_size));
-		if (cat_subread
-		    (*modpp, (*modpp)->asic, 0, eprom_size, eprom_buf)) {
-			outb(VOYAGER_CAT_END, CAT_CMD);
-			continue;
-		}
-		outb(VOYAGER_CAT_END, CAT_CMD);
-		/* Now do everything for the QBB submodule 1 */
-		(*modpp)->ee_size = eprom_hdr->ee_size;
-		(*modpp)->num_asics = eprom_hdr->num_asics;
-		asicpp = &((*modpp)->asic);
-		sp_offset = eprom_hdr->scan_path_offset;
-		/* get rid of the dummy CAT asic and read the real one */
-		kfree((*modpp)->asic);
-		for (asic = 0; asic < (*modpp)->num_asics; asic++) {
-			int j;
-			voyager_asic_t *asicp = *asicpp = kzalloc(sizeof(voyager_asic_t), GFP_KERNEL);	/*&voyager_asic_storage[asic_count++]; */
-			voyager_sp_table_t *sp_table;
-			voyager_at_t *asic_table;
-			voyager_jtt_t *jtag_table;
-
-			if (asicp == NULL) {
-				printk
-				    ("**WARNING** kmalloc failure in cat_init\n");
-				continue;
-			}
-			asicpp = &(asicp->next);
-			asicp->asic_location = asic;
-			sp_table =
-			    (voyager_sp_table_t *) (eprom_buf + sp_offset);
-			asicp->asic_id = sp_table->asic_id;
-			asic_table =
-			    (voyager_at_t *) (eprom_buf +
-					      sp_table->asic_data_offset);
-			for (j = 0; j < 4; j++)
-				asicp->jtag_id[j] = asic_table->jtag_id[j];
-			jtag_table =
-			    (voyager_jtt_t *) (eprom_buf +
-					       asic_table->jtag_offset);
-			asicp->ireg_length = jtag_table->ireg_len;
-			asicp->bit_location = (*modpp)->inst_bits;
-			(*modpp)->inst_bits += asicp->ireg_length;
-			if (asicp->ireg_length > (*modpp)->largest_reg)
-				(*modpp)->largest_reg = asicp->ireg_length;
-			if (asicp->ireg_length < (*modpp)->smallest_reg ||
-			    (*modpp)->smallest_reg == 0)
-				(*modpp)->smallest_reg = asicp->ireg_length;
-			CDEBUG(("asic 0x%x, ireg_length=%d, bit_location=%d\n",
-				asicp->asic_id, asicp->ireg_length,
-				asicp->bit_location));
-			if (asicp->asic_id == VOYAGER_QUAD_QABC) {
-				CDEBUG(("VOYAGER CAT: QABC ASIC found\n"));
-				qabc_asic = asicp;
-			}
-			sp_offset += sizeof(voyager_sp_table_t);
-		}
-		CDEBUG(("Module inst_bits = %d, largest_reg = %d, smallest_reg=%d\n", (*modpp)->inst_bits, (*modpp)->largest_reg, (*modpp)->smallest_reg));
-		/* OK, now we have the QUAD ASICs set up, use them.
-		 * we need to:
-		 *
-		 * 1. Find the Memory area for the Quad CPIs.
-		 * 2. Find the Extended VIC processor
-		 * 3. Configure a second extended VIC processor (This
-		 *    cannot be done for the 51xx.
-		 * */
-		outb(VOYAGER_CAT_RUN, CAT_CMD);
-		cat_connect(*modpp, (*modpp)->asic);
-		CDEBUG(("CAT CONNECTED!!\n"));
-		cat_subread(*modpp, qabc_asic, 0, sizeof(qabc_data), qabc_data);
-		qic_addr = qabc_data[5] << 8;
-		qic_addr = (qic_addr | qabc_data[6]) << 8;
-		qic_addr = (qic_addr | qabc_data[7]) << 8;
-		printk
-		    ("Module \"%s\": Quad Processor Card; CPI 0x%lx, SET=0x%x\n",
-		     cat_module_name(i), qic_addr, qabc_data[8]);
-#if 0				/* plumbing fails---FIXME */
-		if ((qabc_data[8] & 0xf0) == 0) {
-			/* FIXME: 32 way 8 CPU slot monster cannot be
-			 * plumbed this way---need to check for it */
-
-			printk("Plumbing second Extended Quad Processor\n");
-			/* second VIC line hardwired to Quad CPU 1 */
-			qabc_data[8] |= 0x20;
-			cat_subwrite(*modpp, qabc_asic, 8, 1, &qabc_data[8]);
-#ifdef VOYAGER_CAT_DEBUG
-			/* verify plumbing */
-			cat_subread(*modpp, qabc_asic, 8, 1, &qabc_data[8]);
-			if ((qabc_data[8] & 0xf0) == 0) {
-				CDEBUG(("PLUMBING FAILED: 0x%x\n",
-					qabc_data[8]));
-			}
-#endif
-		}
-#endif
-
-		{
-			struct resource *res =
-			    kzalloc(sizeof(struct resource), GFP_KERNEL);
-			res->name = kmalloc(128, GFP_KERNEL);
-			sprintf((char *)res->name, "Voyager %s Quad CPI",
-				cat_module_name(i));
-			res->start = qic_addr;
-			res->end = qic_addr + 0x3ff;
-			request_resource(&iomem_resource, res);
-		}
-
-		qic_addr = (unsigned long)ioremap_cache(qic_addr, 0x400);
-
-		for (j = 0; j < 4; j++) {
-			__u8 cpu;
-
-			if (voyager_8slot) {
-				/* 8 slot has a different mapping,
-				 * each slot has only one vic line, so
-				 * 1 cpu in each slot must be < 8 */
-				cpu = (i & 0x07) + j * 8;
-			} else {
-				cpu = (i & 0x03) + j * 4;
-			}
-			if ((qabc_data[8] & (1 << j))) {
-				voyager_extended_vic_processors |= (1 << cpu);
-			}
-			if (qabc_data[8] & (1 << (j + 4))) {
-				/* Second SET register plumbed: Quad
-				 * card has two VIC connected CPUs.
-				 * Secondary cannot be booted as a VIC
-				 * CPU */
-				voyager_extended_vic_processors |= (1 << cpu);
-				voyager_allowed_boot_processors &=
-				    (~(1 << cpu));
-			}
-
-			voyager_quad_processors |= (1 << cpu);
-			voyager_quad_cpi_addr[cpu] = (struct voyager_qic_cpi *)
-			    (qic_addr + (j << 8));
-			CDEBUG(("CPU%d: CPI address 0x%lx\n", cpu,
-				(unsigned long)voyager_quad_cpi_addr[cpu]));
-		}
-		outb(VOYAGER_CAT_END, CAT_CMD);
-
-		*asicpp = NULL;
-		modpp = &((*modpp)->next);
-	}
-	*modpp = NULL;
-	printk
-	    ("CAT Bus Initialisation finished: extended procs 0x%x, quad procs 0x%x, allowed vic boot = 0x%x\n",
-	     voyager_extended_vic_processors, voyager_quad_processors,
-	     voyager_allowed_boot_processors);
-	request_resource(&ioport_resource, &vic_res);
-	if (voyager_quad_processors)
-		request_resource(&ioport_resource, &qic_res);
-	/* set up the front power switch */
-}
-
-int voyager_cat_readb(__u8 module, __u8 asic, int reg)
-{
-	return 0;
-}
-
-static int cat_disconnect(voyager_module_t * modp, voyager_asic_t * asicp)
-{
-	__u8 val;
-	int err = 0;
-
-	if (!modp->scan_path_connected)
-		return 0;
-	if (asicp->asic_id != VOYAGER_CAT_ID) {
-		CDEBUG(("cat_disconnect: ASIC is not CAT\n"));
-		return 1;
-	}
-	err = cat_read(modp, asicp, VOYAGER_SCANPATH, &val);
-	if (err) {
-		CDEBUG(("cat_disconnect: failed to read SCANPATH\n"));
-		return err;
-	}
-	val &= VOYAGER_DISCONNECT_ASIC;
-	err = cat_write(modp, asicp, VOYAGER_SCANPATH, val);
-	if (err) {
-		CDEBUG(("cat_disconnect: failed to write SCANPATH\n"));
-		return err;
-	}
-	outb(VOYAGER_CAT_END, CAT_CMD);
-	outb(VOYAGER_CAT_RUN, CAT_CMD);
-	modp->scan_path_connected = 0;
-
-	return 0;
-}
-
-static int cat_connect(voyager_module_t * modp, voyager_asic_t * asicp)
-{
-	__u8 val;
-	int err = 0;
-
-	if (modp->scan_path_connected)
-		return 0;
-	if (asicp->asic_id != VOYAGER_CAT_ID) {
-		CDEBUG(("cat_connect: ASIC is not CAT\n"));
-		return 1;
-	}
-
-	err = cat_read(modp, asicp, VOYAGER_SCANPATH, &val);
-	if (err) {
-		CDEBUG(("cat_connect: failed to read SCANPATH\n"));
-		return err;
-	}
-	val |= VOYAGER_CONNECT_ASIC;
-	err = cat_write(modp, asicp, VOYAGER_SCANPATH, val);
-	if (err) {
-		CDEBUG(("cat_connect: failed to write SCANPATH\n"));
-		return err;
-	}
-	outb(VOYAGER_CAT_END, CAT_CMD);
-	outb(VOYAGER_CAT_RUN, CAT_CMD);
-	modp->scan_path_connected = 1;
-
-	return 0;
-}
-
-void voyager_cat_power_off(void)
-{
-	/* Power the machine off by writing to the PSI over the CAT
-	 * bus */
-	__u8 data;
-	voyager_module_t psi = { 0 };
-	voyager_asic_t psi_asic = { 0 };
-
-	psi.asic = &psi_asic;
-	psi.asic->asic_id = VOYAGER_CAT_ID;
-	psi.asic->subaddr = VOYAGER_SUBADDR_HI;
-	psi.module_addr = VOYAGER_PSI;
-	psi.scan_path_connected = 0;
-
-	outb(VOYAGER_CAT_END, CAT_CMD);
-	/* Connect the PSI to the CAT Bus */
-	outb(VOYAGER_CAT_DESELECT, VOYAGER_CAT_CONFIG_PORT);
-	outb(VOYAGER_PSI, VOYAGER_CAT_CONFIG_PORT);
-	outb(VOYAGER_CAT_RUN, CAT_CMD);
-	cat_disconnect(&psi, &psi_asic);
-	/* Read the status */
-	cat_subread(&psi, &psi_asic, VOYAGER_PSI_GENERAL_REG, 1, &data);
-	outb(VOYAGER_CAT_END, CAT_CMD);
-	CDEBUG(("PSI STATUS 0x%x\n", data));
-	/* These two writes are power off prep and perform */
-	data = PSI_CLEAR;
-	outb(VOYAGER_CAT_RUN, CAT_CMD);
-	cat_subwrite(&psi, &psi_asic, VOYAGER_PSI_GENERAL_REG, 1, &data);
-	outb(VOYAGER_CAT_END, CAT_CMD);
-	data = PSI_POWER_DOWN;
-	outb(VOYAGER_CAT_RUN, CAT_CMD);
-	cat_subwrite(&psi, &psi_asic, VOYAGER_PSI_GENERAL_REG, 1, &data);
-	outb(VOYAGER_CAT_END, CAT_CMD);
-}
-
-struct voyager_status voyager_status = { 0 };
-
-void voyager_cat_psi(__u8 cmd, __u16 reg, __u8 * data)
-{
-	voyager_module_t psi = { 0 };
-	voyager_asic_t psi_asic = { 0 };
-
-	psi.asic = &psi_asic;
-	psi.asic->asic_id = VOYAGER_CAT_ID;
-	psi.asic->subaddr = VOYAGER_SUBADDR_HI;
-	psi.module_addr = VOYAGER_PSI;
-	psi.scan_path_connected = 0;
-
-	outb(VOYAGER_CAT_END, CAT_CMD);
-	/* Connect the PSI to the CAT Bus */
-	outb(VOYAGER_CAT_DESELECT, VOYAGER_CAT_CONFIG_PORT);
-	outb(VOYAGER_PSI, VOYAGER_CAT_CONFIG_PORT);
-	outb(VOYAGER_CAT_RUN, CAT_CMD);
-	cat_disconnect(&psi, &psi_asic);
-	switch (cmd) {
-	case VOYAGER_PSI_READ:
-		cat_read(&psi, &psi_asic, reg, data);
-		break;
-	case VOYAGER_PSI_WRITE:
-		cat_write(&psi, &psi_asic, reg, *data);
-		break;
-	case VOYAGER_PSI_SUBREAD:
-		cat_subread(&psi, &psi_asic, reg, 1, data);
-		break;
-	case VOYAGER_PSI_SUBWRITE:
-		cat_subwrite(&psi, &psi_asic, reg, 1, data);
-		break;
-	default:
-		printk(KERN_ERR "Voyager PSI, unrecognised command %d\n", cmd);
-		break;
-	}
-	outb(VOYAGER_CAT_END, CAT_CMD);
-}
-
-void voyager_cat_do_common_interrupt(void)
-{
-	/* This is caused either by a memory parity error or something
-	 * in the PSI */
-	__u8 data;
-	voyager_module_t psi = { 0 };
-	voyager_asic_t psi_asic = { 0 };
-	struct voyager_psi psi_reg;
-	int i;
-      re_read:
-	psi.asic = &psi_asic;
-	psi.asic->asic_id = VOYAGER_CAT_ID;
-	psi.asic->subaddr = VOYAGER_SUBADDR_HI;
-	psi.module_addr = VOYAGER_PSI;
-	psi.scan_path_connected = 0;
-
-	outb(VOYAGER_CAT_END, CAT_CMD);
-	/* Connect the PSI to the CAT Bus */
-	outb(VOYAGER_CAT_DESELECT, VOYAGER_CAT_CONFIG_PORT);
-	outb(VOYAGER_PSI, VOYAGER_CAT_CONFIG_PORT);
-	outb(VOYAGER_CAT_RUN, CAT_CMD);
-	cat_disconnect(&psi, &psi_asic);
-	/* Read the status.  NOTE: Need to read *all* the PSI regs here
-	 * otherwise the cmn int will be reasserted */
-	for (i = 0; i < sizeof(psi_reg.regs); i++) {
-		cat_read(&psi, &psi_asic, i, &((__u8 *) & psi_reg.regs)[i]);
-	}
-	outb(VOYAGER_CAT_END, CAT_CMD);
-	if ((psi_reg.regs.checkbit & 0x02) == 0) {
-		psi_reg.regs.checkbit |= 0x02;
-		cat_write(&psi, &psi_asic, 5, psi_reg.regs.checkbit);
-		printk("VOYAGER RE-READ PSI\n");
-		goto re_read;
-	}
-	outb(VOYAGER_CAT_RUN, CAT_CMD);
-	for (i = 0; i < sizeof(psi_reg.subregs); i++) {
-		/* This looks strange, but the PSI doesn't do auto increment
-		 * correctly */
-		cat_subread(&psi, &psi_asic, VOYAGER_PSI_SUPPLY_REG + i,
-			    1, &((__u8 *) & psi_reg.subregs)[i]);
-	}
-	outb(VOYAGER_CAT_END, CAT_CMD);
-#ifdef VOYAGER_CAT_DEBUG
-	printk("VOYAGER PSI: ");
-	for (i = 0; i < sizeof(psi_reg.regs); i++)
-		printk("%02x ", ((__u8 *) & psi_reg.regs)[i]);
-	printk("\n           ");
-	for (i = 0; i < sizeof(psi_reg.subregs); i++)
-		printk("%02x ", ((__u8 *) & psi_reg.subregs)[i]);
-	printk("\n");
-#endif
-	if (psi_reg.regs.intstatus & PSI_MON) {
-		/* switch off or power fail */
-
-		if (psi_reg.subregs.supply & PSI_SWITCH_OFF) {
-			if (voyager_status.switch_off) {
-				printk(KERN_ERR
-				       "Voyager front panel switch turned off again---Immediate power off!\n");
-				voyager_cat_power_off();
-				/* not reached */
-			} else {
-				printk(KERN_ERR
-				       "Voyager front panel switch turned off\n");
-				voyager_status.switch_off = 1;
-				voyager_status.request_from_kernel = 1;
-				wake_up_process(voyager_thread);
-			}
-			/* Tell the hardware we're taking care of the
-			 * shutdown, otherwise it will power the box off
-			 * within 3 seconds of the switch being pressed and,
-			 * which is much more important to us, continue to 
-			 * assert the common interrupt */
-			data = PSI_CLR_SWITCH_OFF;
-			outb(VOYAGER_CAT_RUN, CAT_CMD);
-			cat_subwrite(&psi, &psi_asic, VOYAGER_PSI_SUPPLY_REG,
-				     1, &data);
-			outb(VOYAGER_CAT_END, CAT_CMD);
-		} else {
-
-			VDEBUG(("Voyager ac fail reg 0x%x\n",
-				psi_reg.subregs.ACfail));
-			if ((psi_reg.subregs.ACfail & AC_FAIL_STAT_CHANGE) == 0) {
-				/* No further update */
-				return;
-			}
-#if 0
-			/* Don't bother trying to find out who failed.
-			 * FIXME: This probably makes the code incorrect on
-			 * anything other than a 345x */
-			for (i = 0; i < 5; i++) {
-				if (psi_reg.subregs.ACfail & (1 << i)) {
-					break;
-				}
-			}
-			printk(KERN_NOTICE "AC FAIL IN SUPPLY %d\n", i);
-#endif
-			/* DON'T do this: it shuts down the AC PSI 
-			   outb(VOYAGER_CAT_RUN, CAT_CMD);
-			   data = PSI_MASK_MASK | i;
-			   cat_subwrite(&psi, &psi_asic, VOYAGER_PSI_MASK,
-			   1, &data);
-			   outb(VOYAGER_CAT_END, CAT_CMD);
-			 */
-			printk(KERN_ERR "Voyager AC power failure\n");
-			outb(VOYAGER_CAT_RUN, CAT_CMD);
-			data = PSI_COLD_START;
-			cat_subwrite(&psi, &psi_asic, VOYAGER_PSI_GENERAL_REG,
-				     1, &data);
-			outb(VOYAGER_CAT_END, CAT_CMD);
-			voyager_status.power_fail = 1;
-			voyager_status.request_from_kernel = 1;
-			wake_up_process(voyager_thread);
-		}
-
-	} else if (psi_reg.regs.intstatus & PSI_FAULT) {
-		/* Major fault! */
-		printk(KERN_ERR
-		       "Voyager PSI Detected major fault, immediate power off!\n");
-		voyager_cat_power_off();
-		/* not reached */
-	} else if (psi_reg.regs.intstatus & (PSI_DC_FAIL | PSI_ALARM
-					     | PSI_CURRENT | PSI_DVM
-					     | PSI_PSCFAULT | PSI_STAT_CHG)) {
-		/* other psi fault */
-
-		printk(KERN_WARNING "Voyager PSI status 0x%x\n", data);
-		/* clear the PSI fault */
-		outb(VOYAGER_CAT_RUN, CAT_CMD);
-		cat_write(&psi, &psi_asic, VOYAGER_PSI_STATUS_REG, 0);
-		outb(VOYAGER_CAT_END, CAT_CMD);
-	}
-}
diff --git a/arch/x86/mach-voyager/voyager_smp.c b/arch/x86/mach-voyager/voyager_smp.c
deleted file mode 100644
index 98e3c2bc7563..000000000000
--- a/arch/x86/mach-voyager/voyager_smp.c
+++ /dev/null
@@ -1,1805 +0,0 @@
-/* -*- mode: c; c-basic-offset: 8 -*- */
-
-/* Copyright (C) 1999,2001
- *
- * Author: J.E.J.Bottomley@HansenPartnership.com
- *
- * This file provides all the same external entries as smp.c but uses
- * the voyager hal to provide the functionality
- */
-#include <linux/cpu.h>
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/kernel_stat.h>
-#include <linux/delay.h>
-#include <linux/mc146818rtc.h>
-#include <linux/cache.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/bootmem.h>
-#include <linux/completion.h>
-#include <asm/desc.h>
-#include <asm/voyager.h>
-#include <asm/vic.h>
-#include <asm/mtrr.h>
-#include <asm/pgalloc.h>
-#include <asm/tlbflush.h>
-#include <asm/arch_hooks.h>
-#include <asm/trampoline.h>
-
-/* TLB state -- visible externally, indexed physically */
-DEFINE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate) = { &init_mm, 0 };
-
-/* CPU IRQ affinity -- set to all ones initially */
-static unsigned long cpu_irq_affinity[NR_CPUS] __cacheline_aligned =
-	{[0 ... NR_CPUS-1]  = ~0UL };
-
-/* per CPU data structure (for /proc/cpuinfo et al), visible externally
- * indexed physically */
-DEFINE_PER_CPU_SHARED_ALIGNED(struct cpuinfo_x86, cpu_info);
-EXPORT_PER_CPU_SYMBOL(cpu_info);
-
-/* physical ID of the CPU used to boot the system */
-unsigned char boot_cpu_id;
-
-/* The memory line addresses for the Quad CPIs */
-struct voyager_qic_cpi *voyager_quad_cpi_addr[NR_CPUS] __cacheline_aligned;
-
-/* The masks for the Extended VIC processors, filled in by cat_init */
-__u32 voyager_extended_vic_processors = 0;
-
-/* Masks for the extended Quad processors which cannot be VIC booted */
-__u32 voyager_allowed_boot_processors = 0;
-
-/* The mask for the Quad Processors (both extended and non-extended) */
-__u32 voyager_quad_processors = 0;
-
-/* Total count of live CPUs, used in process.c to display
- * the CPU information and in irq.c for the per CPU irq
- * activity count.  Finally exported by i386_ksyms.c */
-static int voyager_extended_cpus = 1;
-
-/* Used for the invalidate map that's also checked in the spinlock */
-static volatile unsigned long smp_invalidate_needed;
-
-/* Bitmask of CPUs present in the system - exported by i386_syms.c, used
- * by scheduler but indexed physically */
-cpumask_t phys_cpu_present_map = CPU_MASK_NONE;
-
-/* The internal functions */
-static void send_CPI(__u32 cpuset, __u8 cpi);
-static void ack_CPI(__u8 cpi);
-static int ack_QIC_CPI(__u8 cpi);
-static void ack_special_QIC_CPI(__u8 cpi);
-static void ack_VIC_CPI(__u8 cpi);
-static void send_CPI_allbutself(__u8 cpi);
-static void mask_vic_irq(unsigned int irq);
-static void unmask_vic_irq(unsigned int irq);
-static unsigned int startup_vic_irq(unsigned int irq);
-static void enable_local_vic_irq(unsigned int irq);
-static void disable_local_vic_irq(unsigned int irq);
-static void before_handle_vic_irq(unsigned int irq);
-static void after_handle_vic_irq(unsigned int irq);
-static void set_vic_irq_affinity(unsigned int irq, const struct cpumask *mask);
-static void ack_vic_irq(unsigned int irq);
-static void vic_enable_cpi(void);
-static void do_boot_cpu(__u8 cpuid);
-static void do_quad_bootstrap(void);
-static void initialize_secondary(void);
-
-int hard_smp_processor_id(void);
-int safe_smp_processor_id(void);
-
-/* Inline functions */
-static inline void send_one_QIC_CPI(__u8 cpu, __u8 cpi)
-{
-	voyager_quad_cpi_addr[cpu]->qic_cpi[cpi].cpi =
-	    (smp_processor_id() << 16) + cpi;
-}
-
-static inline void send_QIC_CPI(__u32 cpuset, __u8 cpi)
-{
-	int cpu;
-
-	for_each_online_cpu(cpu) {
-		if (cpuset & (1 << cpu)) {
-#ifdef VOYAGER_DEBUG
-			if (!cpu_online(cpu))
-				VDEBUG(("CPU%d sending cpi %d to CPU%d not in "
-					"cpu_online_map\n",
-					hard_smp_processor_id(), cpi, cpu));
-#endif
-			send_one_QIC_CPI(cpu, cpi - QIC_CPI_OFFSET);
-		}
-	}
-}
-
-static inline void wrapper_smp_local_timer_interrupt(void)
-{
-	irq_enter();
-	smp_local_timer_interrupt();
-	irq_exit();
-}
-
-static inline void send_one_CPI(__u8 cpu, __u8 cpi)
-{
-	if (voyager_quad_processors & (1 << cpu))
-		send_one_QIC_CPI(cpu, cpi - QIC_CPI_OFFSET);
-	else
-		send_CPI(1 << cpu, cpi);
-}
-
-static inline void send_CPI_allbutself(__u8 cpi)
-{
-	__u8 cpu = smp_processor_id();
-	__u32 mask = cpus_addr(cpu_online_map)[0] & ~(1 << cpu);
-	send_CPI(mask, cpi);
-}
-
-static inline int is_cpu_quad(void)
-{
-	__u8 cpumask = inb(VIC_PROC_WHO_AM_I);
-	return ((cpumask & QUAD_IDENTIFIER) == QUAD_IDENTIFIER);
-}
-
-static inline int is_cpu_extended(void)
-{
-	__u8 cpu = hard_smp_processor_id();
-
-	return (voyager_extended_vic_processors & (1 << cpu));
-}
-
-static inline int is_cpu_vic_boot(void)
-{
-	__u8 cpu = hard_smp_processor_id();
-
-	return (voyager_extended_vic_processors
-		& voyager_allowed_boot_processors & (1 << cpu));
-}
-
-static inline void ack_CPI(__u8 cpi)
-{
-	switch (cpi) {
-	case VIC_CPU_BOOT_CPI:
-		if (is_cpu_quad() && !is_cpu_vic_boot())
-			ack_QIC_CPI(cpi);
-		else
-			ack_VIC_CPI(cpi);
-		break;
-	case VIC_SYS_INT:
-	case VIC_CMN_INT:
-		/* These are slightly strange.  Even on the Quad card,
-		 * They are vectored as VIC CPIs */
-		if (is_cpu_quad())
-			ack_special_QIC_CPI(cpi);
-		else
-			ack_VIC_CPI(cpi);
-		break;
-	default:
-		printk("VOYAGER ERROR: CPI%d is in common CPI code\n", cpi);
-		break;
-	}
-}
-
-/* local variables */
-
-/* The VIC IRQ descriptors -- these look almost identical to the
- * 8259 IRQs except that masks and things must be kept per processor
- */
-static struct irq_chip vic_chip = {
-	.name = "VIC",
-	.startup = startup_vic_irq,
-	.mask = mask_vic_irq,
-	.unmask = unmask_vic_irq,
-	.set_affinity = set_vic_irq_affinity,
-};
-
-/* used to count up as CPUs are brought on line (starts at 0) */
-static int cpucount = 0;
-
-/* The per cpu profile stuff - used in smp_local_timer_interrupt */
-static DEFINE_PER_CPU(int, prof_multiplier) = 1;
-static DEFINE_PER_CPU(int, prof_old_multiplier) = 1;
-static DEFINE_PER_CPU(int, prof_counter) = 1;
-
-/* the map used to check if a CPU has booted */
-static __u32 cpu_booted_map;
-
-/* the synchronize flag used to hold all secondary CPUs spinning in
- * a tight loop until the boot sequence is ready for them */
-static cpumask_t smp_commenced_mask = CPU_MASK_NONE;
-
-/* This is for the new dynamic CPU boot code */
-
-/* The per processor IRQ masks (these are usually kept in sync) */
-static __u16 vic_irq_mask[NR_CPUS] __cacheline_aligned;
-
-/* the list of IRQs to be enabled by the VIC_ENABLE_IRQ_CPI */
-static __u16 vic_irq_enable_mask[NR_CPUS] __cacheline_aligned = { 0 };
-
-/* Lock for enable/disable of VIC interrupts */
-static __cacheline_aligned DEFINE_SPINLOCK(vic_irq_lock);
-
-/* The boot processor is correctly set up in PC mode when it
- * comes up, but the secondaries need their master/slave 8259
- * pairs initializing correctly */
-
-/* Interrupt counters (per cpu) and total - used to try to
- * even up the interrupt handling routines */
-static long vic_intr_total = 0;
-static long vic_intr_count[NR_CPUS] __cacheline_aligned = { 0 };
-static unsigned long vic_tick[NR_CPUS] __cacheline_aligned = { 0 };
-
-/* Since we can only use CPI0, we fake all the other CPIs */
-static unsigned long vic_cpi_mailbox[NR_CPUS] __cacheline_aligned;
-
-/* debugging routine to read the isr of the cpu's pic */
-static inline __u16 vic_read_isr(void)
-{
-	__u16 isr;
-
-	outb(0x0b, 0xa0);
-	isr = inb(0xa0) << 8;
-	outb(0x0b, 0x20);
-	isr |= inb(0x20);
-
-	return isr;
-}
-
-static __init void qic_setup(void)
-{
-	if (!is_cpu_quad()) {
-		/* not a quad, no setup */
-		return;
-	}
-	outb(QIC_DEFAULT_MASK0, QIC_MASK_REGISTER0);
-	outb(QIC_CPI_ENABLE, QIC_MASK_REGISTER1);
-
-	if (is_cpu_extended()) {
-		/* the QIC duplicate of the VIC base register */
-		outb(VIC_DEFAULT_CPI_BASE, QIC_VIC_CPI_BASE_REGISTER);
-		outb(QIC_DEFAULT_CPI_BASE, QIC_CPI_BASE_REGISTER);
-
-		/* FIXME: should set up the QIC timer and memory parity
-		 * error vectors here */
-	}
-}
-
-static __init void vic_setup_pic(void)
-{
-	outb(1, VIC_REDIRECT_REGISTER_1);
-	/* clear the claim registers for dynamic routing */
-	outb(0, VIC_CLAIM_REGISTER_0);
-	outb(0, VIC_CLAIM_REGISTER_1);
-
-	outb(0, VIC_PRIORITY_REGISTER);
-	/* Set the Primary and Secondary Microchannel vector
-	 * bases to be the same as the ordinary interrupts
-	 *
-	 * FIXME: This would be more efficient using separate
-	 * vectors. */
-	outb(FIRST_EXTERNAL_VECTOR, VIC_PRIMARY_MC_BASE);
-	outb(FIRST_EXTERNAL_VECTOR, VIC_SECONDARY_MC_BASE);
-	/* Now initiallise the master PIC belonging to this CPU by
-	 * sending the four ICWs */
-
-	/* ICW1: level triggered, ICW4 needed */
-	outb(0x19, 0x20);
-
-	/* ICW2: vector base */
-	outb(FIRST_EXTERNAL_VECTOR, 0x21);
-
-	/* ICW3: slave at line 2 */
-	outb(0x04, 0x21);
-
-	/* ICW4: 8086 mode */
-	outb(0x01, 0x21);
-
-	/* now the same for the slave PIC */
-
-	/* ICW1: level trigger, ICW4 needed */
-	outb(0x19, 0xA0);
-
-	/* ICW2: slave vector base */
-	outb(FIRST_EXTERNAL_VECTOR + 8, 0xA1);
-
-	/* ICW3: slave ID */
-	outb(0x02, 0xA1);
-
-	/* ICW4: 8086 mode */
-	outb(0x01, 0xA1);
-}
-
-static void do_quad_bootstrap(void)
-{
-	if (is_cpu_quad() && is_cpu_vic_boot()) {
-		int i;
-		unsigned long flags;
-		__u8 cpuid = hard_smp_processor_id();
-
-		local_irq_save(flags);
-
-		for (i = 0; i < 4; i++) {
-			/* FIXME: this would be >>3 &0x7 on the 32 way */
-			if (((cpuid >> 2) & 0x03) == i)
-				/* don't lower our own mask! */
-				continue;
-
-			/* masquerade as local Quad CPU */
-			outb(QIC_CPUID_ENABLE | i, QIC_PROCESSOR_ID);
-			/* enable the startup CPI */
-			outb(QIC_BOOT_CPI_MASK, QIC_MASK_REGISTER1);
-			/* restore cpu id */
-			outb(0, QIC_PROCESSOR_ID);
-		}
-		local_irq_restore(flags);
-	}
-}
-
-void prefill_possible_map(void)
-{
-	/* This is empty on voyager because we need a much
-	 * earlier detection which is done in find_smp_config */
-}
-
-/* Set up all the basic stuff: read the SMP config and make all the
- * SMP information reflect only the boot cpu.  All others will be
- * brought on-line later. */
-void __init find_smp_config(void)
-{
-	int i;
-
-	boot_cpu_id = hard_smp_processor_id();
-
-	printk("VOYAGER SMP: Boot cpu is %d\n", boot_cpu_id);
-
-	/* initialize the CPU structures (moved from smp_boot_cpus) */
-	for (i = 0; i < nr_cpu_ids; i++)
-		cpu_irq_affinity[i] = ~0;
-	cpu_online_map = cpumask_of_cpu(boot_cpu_id);
-
-	/* The boot CPU must be extended */
-	voyager_extended_vic_processors = 1 << boot_cpu_id;
-	/* initially, all of the first 8 CPUs can boot */
-	voyager_allowed_boot_processors = 0xff;
-	/* set up everything for just this CPU, we can alter
-	 * this as we start the other CPUs later */
-	/* now get the CPU disposition from the extended CMOS */
-	cpus_addr(phys_cpu_present_map)[0] =
-	    voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK);
-	cpus_addr(phys_cpu_present_map)[0] |=
-	    voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 1) << 8;
-	cpus_addr(phys_cpu_present_map)[0] |=
-	    voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK +
-				       2) << 16;
-	cpus_addr(phys_cpu_present_map)[0] |=
-	    voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK +
-				       3) << 24;
-	init_cpu_possible(&phys_cpu_present_map);
-	printk("VOYAGER SMP: phys_cpu_present_map = 0x%lx\n",
-	       cpus_addr(phys_cpu_present_map)[0]);
-	/* Here we set up the VIC to enable SMP */
-	/* enable the CPIs by writing the base vector to their register */
-	outb(VIC_DEFAULT_CPI_BASE, VIC_CPI_BASE_REGISTER);
-	outb(1, VIC_REDIRECT_REGISTER_1);
-	/* set the claim registers for static routing --- Boot CPU gets
-	 * all interrupts untill all other CPUs started */
-	outb(0xff, VIC_CLAIM_REGISTER_0);
-	outb(0xff, VIC_CLAIM_REGISTER_1);
-	/* Set the Primary and Secondary Microchannel vector
-	 * bases to be the same as the ordinary interrupts
-	 *
-	 * FIXME: This would be more efficient using separate
-	 * vectors. */
-	outb(FIRST_EXTERNAL_VECTOR, VIC_PRIMARY_MC_BASE);
-	outb(FIRST_EXTERNAL_VECTOR, VIC_SECONDARY_MC_BASE);
-
-	/* Finally tell the firmware that we're driving */
-	outb(inb(VOYAGER_SUS_IN_CONTROL_PORT) | VOYAGER_IN_CONTROL_FLAG,
-	     VOYAGER_SUS_IN_CONTROL_PORT);
-
-	current_thread_info()->cpu = boot_cpu_id;
-	percpu_write(cpu_number, boot_cpu_id);
-}
-
-/*
- *	The bootstrap kernel entry code has set these up. Save them
- *	for a given CPU, id is physical */
-void __init smp_store_cpu_info(int id)
-{
-	struct cpuinfo_x86 *c = &cpu_data(id);
-
-	*c = boot_cpu_data;
-	c->cpu_index = id;
-
-	identify_secondary_cpu(c);
-}
-
-/* Routine initially called when a non-boot CPU is brought online */
-static void __init start_secondary(void *unused)
-{
-	__u8 cpuid = hard_smp_processor_id();
-
-	cpu_init();
-
-	/* OK, we're in the routine */
-	ack_CPI(VIC_CPU_BOOT_CPI);
-
-	/* setup the 8259 master slave pair belonging to this CPU ---
-	 * we won't actually receive any until the boot CPU
-	 * relinquishes it's static routing mask */
-	vic_setup_pic();
-
-	qic_setup();
-
-	if (is_cpu_quad() && !is_cpu_vic_boot()) {
-		/* clear the boot CPI */
-		__u8 dummy;
-
-		dummy =
-		    voyager_quad_cpi_addr[cpuid]->qic_cpi[VIC_CPU_BOOT_CPI].cpi;
-		printk("read dummy %d\n", dummy);
-	}
-
-	/* lower the mask to receive CPIs */
-	vic_enable_cpi();
-
-	VDEBUG(("VOYAGER SMP: CPU%d, stack at about %p\n", cpuid, &cpuid));
-
-	notify_cpu_starting(cpuid);
-
-	/* enable interrupts */
-	local_irq_enable();
-
-	/* get our bogomips */
-	calibrate_delay();
-
-	/* save our processor parameters */
-	smp_store_cpu_info(cpuid);
-
-	/* if we're a quad, we may need to bootstrap other CPUs */
-	do_quad_bootstrap();
-
-	/* FIXME: this is rather a poor hack to prevent the CPU
-	 * activating softirqs while it's supposed to be waiting for
-	 * permission to proceed.  Without this, the new per CPU stuff
-	 * in the softirqs will fail */
-	local_irq_disable();
-	cpu_set(cpuid, cpu_callin_map);
-
-	/* signal that we're done */
-	cpu_booted_map = 1;
-
-	while (!cpu_isset(cpuid, smp_commenced_mask))
-		rep_nop();
-	local_irq_enable();
-
-	local_flush_tlb();
-
-	cpu_set(cpuid, cpu_online_map);
-	wmb();
-	cpu_idle();
-}
-
-/* Routine to kick start the given CPU and wait for it to report ready
- * (or timeout in startup).  When this routine returns, the requested
- * CPU is either fully running and configured or known to be dead.
- *
- * We call this routine sequentially 1 CPU at a time, so no need for
- * locking */
-
-static void __init do_boot_cpu(__u8 cpu)
-{
-	struct task_struct *idle;
-	int timeout;
-	unsigned long flags;
-	int quad_boot = (1 << cpu) & voyager_quad_processors
-	    & ~(voyager_extended_vic_processors
-		& voyager_allowed_boot_processors);
-
-	/* This is the format of the CPI IDT gate (in real mode) which
-	 * we're hijacking to boot the CPU */
-	union IDTFormat {
-		struct seg {
-			__u16 Offset;
-			__u16 Segment;
-		} idt;
-		__u32 val;
-	} hijack_source;
-
-	__u32 *hijack_vector;
-	__u32 start_phys_address = setup_trampoline();
-
-	/* There's a clever trick to this: The linux trampoline is
-	 * compiled to begin at absolute location zero, so make the
-	 * address zero but have the data segment selector compensate
-	 * for the actual address */
-	hijack_source.idt.Offset = start_phys_address & 0x000F;
-	hijack_source.idt.Segment = (start_phys_address >> 4) & 0xFFFF;
-
-	cpucount++;
-	alternatives_smp_switch(1);
-
-	idle = fork_idle(cpu);
-	if (IS_ERR(idle))
-		panic("failed fork for CPU%d", cpu);
-	idle->thread.ip = (unsigned long)start_secondary;
-	/* init_tasks (in sched.c) is indexed logically */
-	stack_start.sp = (void *)idle->thread.sp;
-
-	per_cpu(current_task, cpu) = idle;
-	early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu);
-	irq_ctx_init(cpu);
-
-	/* Note: Don't modify initial ss override */
-	VDEBUG(("VOYAGER SMP: Booting CPU%d at 0x%lx[%x:%x], stack %p\n", cpu,
-		(unsigned long)hijack_source.val, hijack_source.idt.Segment,
-		hijack_source.idt.Offset, stack_start.sp));
-
-	/* init lowmem identity mapping */
-	clone_pgd_range(swapper_pg_dir, swapper_pg_dir + KERNEL_PGD_BOUNDARY,
-			min_t(unsigned long, KERNEL_PGD_PTRS, KERNEL_PGD_BOUNDARY));
-	flush_tlb_all();
-
-	if (quad_boot) {
-		printk("CPU %d: non extended Quad boot\n", cpu);
-		hijack_vector =
-		    (__u32 *)
-		    phys_to_virt((VIC_CPU_BOOT_CPI + QIC_DEFAULT_CPI_BASE) * 4);
-		*hijack_vector = hijack_source.val;
-	} else {
-		printk("CPU%d: extended VIC boot\n", cpu);
-		hijack_vector =
-		    (__u32 *)
-		    phys_to_virt((VIC_CPU_BOOT_CPI + VIC_DEFAULT_CPI_BASE) * 4);
-		*hijack_vector = hijack_source.val;
-		/* VIC errata, may also receive interrupt at this address */
-		hijack_vector =
-		    (__u32 *)
-		    phys_to_virt((VIC_CPU_BOOT_ERRATA_CPI +
-				  VIC_DEFAULT_CPI_BASE) * 4);
-		*hijack_vector = hijack_source.val;
-	}
-	/* All non-boot CPUs start with interrupts fully masked.  Need
-	 * to lower the mask of the CPI we're about to send.  We do
-	 * this in the VIC by masquerading as the processor we're
-	 * about to boot and lowering its interrupt mask */
-	local_irq_save(flags);
-	if (quad_boot) {
-		send_one_QIC_CPI(cpu, VIC_CPU_BOOT_CPI);
-	} else {
-		outb(VIC_CPU_MASQUERADE_ENABLE | cpu, VIC_PROCESSOR_ID);
-		/* here we're altering registers belonging to `cpu' */
-
-		outb(VIC_BOOT_INTERRUPT_MASK, 0x21);
-		/* now go back to our original identity */
-		outb(boot_cpu_id, VIC_PROCESSOR_ID);
-
-		/* and boot the CPU */
-
-		send_CPI((1 << cpu), VIC_CPU_BOOT_CPI);
-	}
-	cpu_booted_map = 0;
-	local_irq_restore(flags);
-
-	/* now wait for it to become ready (or timeout) */
-	for (timeout = 0; timeout < 50000; timeout++) {
-		if (cpu_booted_map)
-			break;
-		udelay(100);
-	}
-	/* reset the page table */
-	zap_low_mappings();
-
-	if (cpu_booted_map) {
-		VDEBUG(("CPU%d: Booted successfully, back in CPU %d\n",
-			cpu, smp_processor_id()));
-
-		printk("CPU%d: ", cpu);
-		print_cpu_info(&cpu_data(cpu));
-		wmb();
-		cpu_set(cpu, cpu_callout_map);
-		cpu_set(cpu, cpu_present_map);
-	} else {
-		printk("CPU%d FAILED TO BOOT: ", cpu);
-		if (*
-		    ((volatile unsigned char *)phys_to_virt(start_phys_address))
-		    == 0xA5)
-			printk("Stuck.\n");
-		else
-			printk("Not responding.\n");
-
-		cpucount--;
-	}
-}
-
-void __init smp_boot_cpus(void)
-{
-	int i;
-
-	/* CAT BUS initialisation must be done after the memory */
-	/* FIXME: The L4 has a catbus too, it just needs to be
-	 * accessed in a totally different way */
-	if (voyager_level == 5) {
-		voyager_cat_init();
-
-		/* now that the cat has probed the Voyager System Bus, sanity
-		 * check the cpu map */
-		if (((voyager_quad_processors | voyager_extended_vic_processors)
-		     & cpus_addr(phys_cpu_present_map)[0]) !=
-		    cpus_addr(phys_cpu_present_map)[0]) {
-			/* should panic */
-			printk("\n\n***WARNING*** "
-			       "Sanity check of CPU present map FAILED\n");
-		}
-	} else if (voyager_level == 4)
-		voyager_extended_vic_processors =
-		    cpus_addr(phys_cpu_present_map)[0];
-
-	/* this sets up the idle task to run on the current cpu */
-	voyager_extended_cpus = 1;
-	/* Remove the global_irq_holder setting, it triggers a BUG() on
-	 * schedule at the moment */
-	//global_irq_holder = boot_cpu_id;
-
-	/* FIXME: Need to do something about this but currently only works
-	 * on CPUs with a tsc which none of mine have.
-	 smp_tune_scheduling();
-	 */
-	smp_store_cpu_info(boot_cpu_id);
-	/* setup the jump vector */
-	initial_code = (unsigned long)initialize_secondary;
-	printk("CPU%d: ", boot_cpu_id);
-	print_cpu_info(&cpu_data(boot_cpu_id));
-
-	if (is_cpu_quad()) {
-		/* booting on a Quad CPU */
-		printk("VOYAGER SMP: Boot CPU is Quad\n");
-		qic_setup();
-		do_quad_bootstrap();
-	}
-
-	/* enable our own CPIs */
-	vic_enable_cpi();
-
-	cpu_set(boot_cpu_id, cpu_online_map);
-	cpu_set(boot_cpu_id, cpu_callout_map);
-
-	/* loop over all the extended VIC CPUs and boot them.  The
-	 * Quad CPUs must be bootstrapped by their extended VIC cpu */
-	for (i = 0; i < nr_cpu_ids; i++) {
-		if (i == boot_cpu_id || !cpu_isset(i, phys_cpu_present_map))
-			continue;
-		do_boot_cpu(i);
-		/* This udelay seems to be needed for the Quad boots
-		 * don't remove unless you know what you're doing */
-		udelay(1000);
-	}
-	/* we could compute the total bogomips here, but why bother?,
-	 * Code added from smpboot.c */
-	{
-		unsigned long bogosum = 0;
-
-		for_each_online_cpu(i)
-			bogosum += cpu_data(i).loops_per_jiffy;
-		printk(KERN_INFO "Total of %d processors activated "
-		       "(%lu.%02lu BogoMIPS).\n",
-		       cpucount + 1, bogosum / (500000 / HZ),
-		       (bogosum / (5000 / HZ)) % 100);
-	}
-	voyager_extended_cpus = hweight32(voyager_extended_vic_processors);
-	printk("VOYAGER: Extended (interrupt handling CPUs): "
-	       "%d, non-extended: %d\n", voyager_extended_cpus,
-	       num_booting_cpus() - voyager_extended_cpus);
-	/* that's it, switch to symmetric mode */
-	outb(0, VIC_PRIORITY_REGISTER);
-	outb(0, VIC_CLAIM_REGISTER_0);
-	outb(0, VIC_CLAIM_REGISTER_1);
-
-	VDEBUG(("VOYAGER SMP: Booted with %d CPUs\n", num_booting_cpus()));
-}
-
-/* Reload the secondary CPUs task structure (this function does not
- * return ) */
-static void __init initialize_secondary(void)
-{
-#if 0
-	// AC kernels only
-	set_current(hard_get_current());
-#endif
-
-	/*
-	 * We don't actually need to load the full TSS,
-	 * basically just the stack pointer and the eip.
-	 */
-
-	asm volatile ("movl %0,%%esp\n\t"
-		      "jmp *%1"::"r" (current->thread.sp),
-		      "r"(current->thread.ip));
-}
-
-/* handle a Voyager SYS_INT -- If we don't, the base board will
- * panic the system.
- *
- * System interrupts occur because some problem was detected on the
- * various busses.  To find out what you have to probe all the
- * hardware via the CAT bus.  FIXME: At the moment we do nothing. */
-void smp_vic_sys_interrupt(struct pt_regs *regs)
-{
-	ack_CPI(VIC_SYS_INT);
-	printk("Voyager SYSTEM INTERRUPT\n");
-}
-
-/* Handle a voyager CMN_INT; These interrupts occur either because of
- * a system status change or because a single bit memory error
- * occurred.  FIXME: At the moment, ignore all this. */
-void smp_vic_cmn_interrupt(struct pt_regs *regs)
-{
-	static __u8 in_cmn_int = 0;
-	static DEFINE_SPINLOCK(cmn_int_lock);
-
-	/* common ints are broadcast, so make sure we only do this once */
-	_raw_spin_lock(&cmn_int_lock);
-	if (in_cmn_int)
-		goto unlock_end;
-
-	in_cmn_int++;
-	_raw_spin_unlock(&cmn_int_lock);
-
-	VDEBUG(("Voyager COMMON INTERRUPT\n"));
-
-	if (voyager_level == 5)
-		voyager_cat_do_common_interrupt();
-
-	_raw_spin_lock(&cmn_int_lock);
-	in_cmn_int = 0;
-      unlock_end:
-	_raw_spin_unlock(&cmn_int_lock);
-	ack_CPI(VIC_CMN_INT);
-}
-
-/*
- * Reschedule call back. Nothing to do, all the work is done
- * automatically when we return from the interrupt.  */
-static void smp_reschedule_interrupt(void)
-{
-	/* do nothing */
-}
-
-static struct mm_struct *flush_mm;
-static unsigned long flush_va;
-static DEFINE_SPINLOCK(tlbstate_lock);
-
-/*
- * We cannot call mmdrop() because we are in interrupt context,
- * instead update mm->cpu_vm_mask.
- *
- * We need to reload %cr3 since the page tables may be going
- * away from under us..
- */
-static inline void voyager_leave_mm(unsigned long cpu)
-{
-	if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_OK)
-		BUG();
-	cpu_clear(cpu, per_cpu(cpu_tlbstate, cpu).active_mm->cpu_vm_mask);
-	load_cr3(swapper_pg_dir);
-}
-
-/*
- * Invalidate call-back
- */
-static void smp_invalidate_interrupt(void)
-{
-	__u8 cpu = smp_processor_id();
-
-	if (!test_bit(cpu, &smp_invalidate_needed))
-		return;
-	/* This will flood messages.  Don't uncomment unless you see
-	 * Problems with cross cpu invalidation
-	 VDEBUG(("VOYAGER SMP: CPU%d received INVALIDATE_CPI\n",
-	 smp_processor_id()));
-	 */
-
-	if (flush_mm == per_cpu(cpu_tlbstate, cpu).active_mm) {
-		if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_OK) {
-			if (flush_va == TLB_FLUSH_ALL)
-				local_flush_tlb();
-			else
-				__flush_tlb_one(flush_va);
-		} else
-			voyager_leave_mm(cpu);
-	}
-	smp_mb__before_clear_bit();
-	clear_bit(cpu, &smp_invalidate_needed);
-	smp_mb__after_clear_bit();
-}
-
-/* All the new flush operations for 2.4 */
-
-/* This routine is called with a physical cpu mask */
-static void
-voyager_flush_tlb_others(unsigned long cpumask, struct mm_struct *mm,
-			 unsigned long va)
-{
-	int stuck = 50000;
-
-	if (!cpumask)
-		BUG();
-	if ((cpumask & cpus_addr(cpu_online_map)[0]) != cpumask)
-		BUG();
-	if (cpumask & (1 << smp_processor_id()))
-		BUG();
-	if (!mm)
-		BUG();
-
-	spin_lock(&tlbstate_lock);
-
-	flush_mm = mm;
-	flush_va = va;
-	atomic_set_mask(cpumask, &smp_invalidate_needed);
-	/*
-	 * We have to send the CPI only to
-	 * CPUs affected.
-	 */
-	send_CPI(cpumask, VIC_INVALIDATE_CPI);
-
-	while (smp_invalidate_needed) {
-		mb();
-		if (--stuck == 0) {
-			printk("***WARNING*** Stuck doing invalidate CPI "
-			       "(CPU%d)\n", smp_processor_id());
-			break;
-		}
-	}
-
-	/* Uncomment only to debug invalidation problems
-	   VDEBUG(("VOYAGER SMP: Completed invalidate CPI (CPU%d)\n", cpu));
-	 */
-
-	flush_mm = NULL;
-	flush_va = 0;
-	spin_unlock(&tlbstate_lock);
-}
-
-void flush_tlb_current_task(void)
-{
-	struct mm_struct *mm = current->mm;
-	unsigned long cpu_mask;
-
-	preempt_disable();
-
-	cpu_mask = cpus_addr(mm->cpu_vm_mask)[0] & ~(1 << smp_processor_id());
-	local_flush_tlb();
-	if (cpu_mask)
-		voyager_flush_tlb_others(cpu_mask, mm, TLB_FLUSH_ALL);
-
-	preempt_enable();
-}
-
-void flush_tlb_mm(struct mm_struct *mm)
-{
-	unsigned long cpu_mask;
-
-	preempt_disable();
-
-	cpu_mask = cpus_addr(mm->cpu_vm_mask)[0] & ~(1 << smp_processor_id());
-
-	if (current->active_mm == mm) {
-		if (current->mm)
-			local_flush_tlb();
-		else
-			voyager_leave_mm(smp_processor_id());
-	}
-	if (cpu_mask)
-		voyager_flush_tlb_others(cpu_mask, mm, TLB_FLUSH_ALL);
-
-	preempt_enable();
-}
-
-void flush_tlb_page(struct vm_area_struct *vma, unsigned long va)
-{
-	struct mm_struct *mm = vma->vm_mm;
-	unsigned long cpu_mask;
-
-	preempt_disable();
-
-	cpu_mask = cpus_addr(mm->cpu_vm_mask)[0] & ~(1 << smp_processor_id());
-	if (current->active_mm == mm) {
-		if (current->mm)
-			__flush_tlb_one(va);
-		else
-			voyager_leave_mm(smp_processor_id());
-	}
-
-	if (cpu_mask)
-		voyager_flush_tlb_others(cpu_mask, mm, va);
-
-	preempt_enable();
-}
-
-EXPORT_SYMBOL(flush_tlb_page);
-
-/* enable the requested IRQs */
-static void smp_enable_irq_interrupt(void)
-{
-	__u8 irq;
-	__u8 cpu = get_cpu();
-
-	VDEBUG(("VOYAGER SMP: CPU%d enabling irq mask 0x%x\n", cpu,
-		vic_irq_enable_mask[cpu]));
-
-	spin_lock(&vic_irq_lock);
-	for (irq = 0; irq < 16; irq++) {
-		if (vic_irq_enable_mask[cpu] & (1 << irq))
-			enable_local_vic_irq(irq);
-	}
-	vic_irq_enable_mask[cpu] = 0;
-	spin_unlock(&vic_irq_lock);
-
-	put_cpu_no_resched();
-}
-
-/*
- *	CPU halt call-back
- */
-static void smp_stop_cpu_function(void *dummy)
-{
-	VDEBUG(("VOYAGER SMP: CPU%d is STOPPING\n", smp_processor_id()));
-	cpu_clear(smp_processor_id(), cpu_online_map);
-	local_irq_disable();
-	for (;;)
-		halt();
-}
-
-/* execute a thread on a new CPU.  The function to be called must be
- * previously set up.  This is used to schedule a function for
- * execution on all CPUs - set up the function then broadcast a
- * function_interrupt CPI to come here on each CPU */
-static void smp_call_function_interrupt(void)
-{
-	irq_enter();
-	generic_smp_call_function_interrupt();
-	__get_cpu_var(irq_stat).irq_call_count++;
-	irq_exit();
-}
-
-static void smp_call_function_single_interrupt(void)
-{
-	irq_enter();
-	generic_smp_call_function_single_interrupt();
-	__get_cpu_var(irq_stat).irq_call_count++;
-	irq_exit();
-}
-
-/* Sorry about the name.  In an APIC based system, the APICs
- * themselves are programmed to send a timer interrupt.  This is used
- * by linux to reschedule the processor.  Voyager doesn't have this,
- * so we use the system clock to interrupt one processor, which in
- * turn, broadcasts a timer CPI to all the others --- we receive that
- * CPI here.  We don't use this actually for counting so losing
- * ticks doesn't matter
- *
- * FIXME: For those CPUs which actually have a local APIC, we could
- * try to use it to trigger this interrupt instead of having to
- * broadcast the timer tick.  Unfortunately, all my pentium DYADs have
- * no local APIC, so I can't do this
- *
- * This function is currently a placeholder and is unused in the code */
-void smp_apic_timer_interrupt(struct pt_regs *regs)
-{
-	struct pt_regs *old_regs = set_irq_regs(regs);
-	wrapper_smp_local_timer_interrupt();
-	set_irq_regs(old_regs);
-}
-
-/* All of the QUAD interrupt GATES */
-void smp_qic_timer_interrupt(struct pt_regs *regs)
-{
-	struct pt_regs *old_regs = set_irq_regs(regs);
-	ack_QIC_CPI(QIC_TIMER_CPI);
-	wrapper_smp_local_timer_interrupt();
-	set_irq_regs(old_regs);
-}
-
-void smp_qic_invalidate_interrupt(struct pt_regs *regs)
-{
-	ack_QIC_CPI(QIC_INVALIDATE_CPI);
-	smp_invalidate_interrupt();
-}
-
-void smp_qic_reschedule_interrupt(struct pt_regs *regs)
-{
-	ack_QIC_CPI(QIC_RESCHEDULE_CPI);
-	smp_reschedule_interrupt();
-}
-
-void smp_qic_enable_irq_interrupt(struct pt_regs *regs)
-{
-	ack_QIC_CPI(QIC_ENABLE_IRQ_CPI);
-	smp_enable_irq_interrupt();
-}
-
-void smp_qic_call_function_interrupt(struct pt_regs *regs)
-{
-	ack_QIC_CPI(QIC_CALL_FUNCTION_CPI);
-	smp_call_function_interrupt();
-}
-
-void smp_qic_call_function_single_interrupt(struct pt_regs *regs)
-{
-	ack_QIC_CPI(QIC_CALL_FUNCTION_SINGLE_CPI);
-	smp_call_function_single_interrupt();
-}
-
-void smp_vic_cpi_interrupt(struct pt_regs *regs)
-{
-	struct pt_regs *old_regs = set_irq_regs(regs);
-	__u8 cpu = smp_processor_id();
-
-	if (is_cpu_quad())
-		ack_QIC_CPI(VIC_CPI_LEVEL0);
-	else
-		ack_VIC_CPI(VIC_CPI_LEVEL0);
-
-	if (test_and_clear_bit(VIC_TIMER_CPI, &vic_cpi_mailbox[cpu]))
-		wrapper_smp_local_timer_interrupt();
-	if (test_and_clear_bit(VIC_INVALIDATE_CPI, &vic_cpi_mailbox[cpu]))
-		smp_invalidate_interrupt();
-	if (test_and_clear_bit(VIC_RESCHEDULE_CPI, &vic_cpi_mailbox[cpu]))
-		smp_reschedule_interrupt();
-	if (test_and_clear_bit(VIC_ENABLE_IRQ_CPI, &vic_cpi_mailbox[cpu]))
-		smp_enable_irq_interrupt();
-	if (test_and_clear_bit(VIC_CALL_FUNCTION_CPI, &vic_cpi_mailbox[cpu]))
-		smp_call_function_interrupt();
-	if (test_and_clear_bit(VIC_CALL_FUNCTION_SINGLE_CPI, &vic_cpi_mailbox[cpu]))
-		smp_call_function_single_interrupt();
-	set_irq_regs(old_regs);
-}
-
-static void do_flush_tlb_all(void *info)
-{
-	unsigned long cpu = smp_processor_id();
-
-	__flush_tlb_all();
-	if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_LAZY)
-		voyager_leave_mm(cpu);
-}
-
-/* flush the TLB of every active CPU in the system */
-void flush_tlb_all(void)
-{
-	on_each_cpu(do_flush_tlb_all, 0, 1);
-}
-
-/* send a reschedule CPI to one CPU by physical CPU number*/
-static void voyager_smp_send_reschedule(int cpu)
-{
-	send_one_CPI(cpu, VIC_RESCHEDULE_CPI);
-}
-
-int hard_smp_processor_id(void)
-{
-	__u8 i;
-	__u8 cpumask = inb(VIC_PROC_WHO_AM_I);
-	if ((cpumask & QUAD_IDENTIFIER) == QUAD_IDENTIFIER)
-		return cpumask & 0x1F;
-
-	for (i = 0; i < 8; i++) {
-		if (cpumask & (1 << i))
-			return i;
-	}
-	printk("** WARNING ** Illegal cpuid returned by VIC: %d", cpumask);
-	return 0;
-}
-
-int safe_smp_processor_id(void)
-{
-	return hard_smp_processor_id();
-}
-
-/* broadcast a halt to all other CPUs */
-static void voyager_smp_send_stop(void)
-{
-	smp_call_function(smp_stop_cpu_function, NULL, 1);
-}
-
-/* this function is triggered in time.c when a clock tick fires
- * we need to re-broadcast the tick to all CPUs */
-void smp_vic_timer_interrupt(void)
-{
-	send_CPI_allbutself(VIC_TIMER_CPI);
-	smp_local_timer_interrupt();
-}
-
-/* local (per CPU) timer interrupt.  It does both profiling and
- * process statistics/rescheduling.
- *
- * We do profiling in every local tick, statistics/rescheduling
- * happen only every 'profiling multiplier' ticks. The default
- * multiplier is 1 and it can be changed by writing the new multiplier
- * value into /proc/profile.
- */
-void smp_local_timer_interrupt(void)
-{
-	int cpu = smp_processor_id();
-	long weight;
-
-	profile_tick(CPU_PROFILING);
-	if (--per_cpu(prof_counter, cpu) <= 0) {
-		/*
-		 * The multiplier may have changed since the last time we got
-		 * to this point as a result of the user writing to
-		 * /proc/profile. In this case we need to adjust the APIC
-		 * timer accordingly.
-		 *
-		 * Interrupts are already masked off at this point.
-		 */
-		per_cpu(prof_counter, cpu) = per_cpu(prof_multiplier, cpu);
-		if (per_cpu(prof_counter, cpu) !=
-		    per_cpu(prof_old_multiplier, cpu)) {
-			/* FIXME: need to update the vic timer tick here */
-			per_cpu(prof_old_multiplier, cpu) =
-			    per_cpu(prof_counter, cpu);
-		}
-
-		update_process_times(user_mode_vm(get_irq_regs()));
-	}
-
-	if (((1 << cpu) & voyager_extended_vic_processors) == 0)
-		/* only extended VIC processors participate in
-		 * interrupt distribution */
-		return;
-
-	/*
-	 * We take the 'long' return path, and there every subsystem
-	 * grabs the appropriate locks (kernel lock/ irq lock).
-	 *
-	 * we might want to decouple profiling from the 'long path',
-	 * and do the profiling totally in assembly.
-	 *
-	 * Currently this isn't too much of an issue (performance wise),
-	 * we can take more than 100K local irqs per second on a 100 MHz P5.
-	 */
-
-	if ((++vic_tick[cpu] & 0x7) != 0)
-		return;
-	/* get here every 16 ticks (about every 1/6 of a second) */
-
-	/* Change our priority to give someone else a chance at getting
-	 * the IRQ. The algorithm goes like this:
-	 *
-	 * In the VIC, the dynamically routed interrupt is always
-	 * handled by the lowest priority eligible (i.e. receiving
-	 * interrupts) CPU.  If >1 eligible CPUs are equal lowest, the
-	 * lowest processor number gets it.
-	 *
-	 * The priority of a CPU is controlled by a special per-CPU
-	 * VIC priority register which is 3 bits wide 0 being lowest
-	 * and 7 highest priority..
-	 *
-	 * Therefore we subtract the average number of interrupts from
-	 * the number we've fielded.  If this number is negative, we
-	 * lower the activity count and if it is positive, we raise
-	 * it.
-	 *
-	 * I'm afraid this still leads to odd looking interrupt counts:
-	 * the totals are all roughly equal, but the individual ones
-	 * look rather skewed.
-	 *
-	 * FIXME: This algorithm is total crap when mixed with SMP
-	 * affinity code since we now try to even up the interrupt
-	 * counts when an affinity binding is keeping them on a
-	 * particular CPU*/
-	weight = (vic_intr_count[cpu] * voyager_extended_cpus
-		  - vic_intr_total) >> 4;
-	weight += 4;
-	if (weight > 7)
-		weight = 7;
-	if (weight < 0)
-		weight = 0;
-
-	outb((__u8) weight, VIC_PRIORITY_REGISTER);
-
-#ifdef VOYAGER_DEBUG
-	if ((vic_tick[cpu] & 0xFFF) == 0) {
-		/* print this message roughly every 25 secs */
-		printk("VOYAGER SMP: vic_tick[%d] = %lu, weight = %ld\n",
-		       cpu, vic_tick[cpu], weight);
-	}
-#endif
-}
-
-/* setup the profiling timer */
-int setup_profiling_timer(unsigned int multiplier)
-{
-	int i;
-
-	if ((!multiplier))
-		return -EINVAL;
-
-	/*
-	 * Set the new multiplier for each CPU. CPUs don't start using the
-	 * new values until the next timer interrupt in which they do process
-	 * accounting.
-	 */
-	for (i = 0; i < nr_cpu_ids; ++i)
-		per_cpu(prof_multiplier, i) = multiplier;
-
-	return 0;
-}
-
-/* This is a bit of a mess, but forced on us by the genirq changes
- * there's no genirq handler that really does what voyager wants
- * so hack it up with the simple IRQ handler */
-static void handle_vic_irq(unsigned int irq, struct irq_desc *desc)
-{
-	before_handle_vic_irq(irq);
-	handle_simple_irq(irq, desc);
-	after_handle_vic_irq(irq);
-}
-
-/*  The CPIs are handled in the per cpu 8259s, so they must be
- *  enabled to be received: FIX: enabling the CPIs in the early
- *  boot sequence interferes with bug checking; enable them later
- *  on in smp_init */
-#define VIC_SET_GATE(cpi, vector) \
-	set_intr_gate((cpi) + VIC_DEFAULT_CPI_BASE, (vector))
-#define QIC_SET_GATE(cpi, vector) \
-	set_intr_gate((cpi) + QIC_DEFAULT_CPI_BASE, (vector))
-
-void __init voyager_smp_intr_init(void)
-{
-	int i;
-
-	/* initialize the per cpu irq mask to all disabled */
-	for (i = 0; i < nr_cpu_ids; i++)
-		vic_irq_mask[i] = 0xFFFF;
-
-	VIC_SET_GATE(VIC_CPI_LEVEL0, vic_cpi_interrupt);
-
-	VIC_SET_GATE(VIC_SYS_INT, vic_sys_interrupt);
-	VIC_SET_GATE(VIC_CMN_INT, vic_cmn_interrupt);
-
-	QIC_SET_GATE(QIC_TIMER_CPI, qic_timer_interrupt);
-	QIC_SET_GATE(QIC_INVALIDATE_CPI, qic_invalidate_interrupt);
-	QIC_SET_GATE(QIC_RESCHEDULE_CPI, qic_reschedule_interrupt);
-	QIC_SET_GATE(QIC_ENABLE_IRQ_CPI, qic_enable_irq_interrupt);
-	QIC_SET_GATE(QIC_CALL_FUNCTION_CPI, qic_call_function_interrupt);
-
-	/* now put the VIC descriptor into the first 48 IRQs
-	 *
-	 * This is for later: first 16 correspond to PC IRQs; next 16
-	 * are Primary MC IRQs and final 16 are Secondary MC IRQs */
-	for (i = 0; i < 48; i++)
-		set_irq_chip_and_handler(i, &vic_chip, handle_vic_irq);
-}
-
-/* send a CPI at level cpi to a set of cpus in cpuset (set 1 bit per
- * processor to receive CPI */
-static void send_CPI(__u32 cpuset, __u8 cpi)
-{
-	int cpu;
-	__u32 quad_cpuset = (cpuset & voyager_quad_processors);
-
-	if (cpi < VIC_START_FAKE_CPI) {
-		/* fake CPI are only used for booting, so send to the
-		 * extended quads as well---Quads must be VIC booted */
-		outb((__u8) (cpuset), VIC_CPI_Registers[cpi]);
-		return;
-	}
-	if (quad_cpuset)
-		send_QIC_CPI(quad_cpuset, cpi);
-	cpuset &= ~quad_cpuset;
-	cpuset &= 0xff;		/* only first 8 CPUs vaild for VIC CPI */
-	if (cpuset == 0)
-		return;
-	for_each_online_cpu(cpu) {
-		if (cpuset & (1 << cpu))
-			set_bit(cpi, &vic_cpi_mailbox[cpu]);
-	}
-	if (cpuset)
-		outb((__u8) cpuset, VIC_CPI_Registers[VIC_CPI_LEVEL0]);
-}
-
-/* Acknowledge receipt of CPI in the QIC, clear in QIC hardware and
- * set the cache line to shared by reading it.
- *
- * DON'T make this inline otherwise the cache line read will be
- * optimised away
- * */
-static int ack_QIC_CPI(__u8 cpi)
-{
-	__u8 cpu = hard_smp_processor_id();
-
-	cpi &= 7;
-
-	outb(1 << cpi, QIC_INTERRUPT_CLEAR1);
-	return voyager_quad_cpi_addr[cpu]->qic_cpi[cpi].cpi;
-}
-
-static void ack_special_QIC_CPI(__u8 cpi)
-{
-	switch (cpi) {
-	case VIC_CMN_INT:
-		outb(QIC_CMN_INT, QIC_INTERRUPT_CLEAR0);
-		break;
-	case VIC_SYS_INT:
-		outb(QIC_SYS_INT, QIC_INTERRUPT_CLEAR0);
-		break;
-	}
-	/* also clear at the VIC, just in case (nop for non-extended proc) */
-	ack_VIC_CPI(cpi);
-}
-
-/* Acknowledge receipt of CPI in the VIC (essentially an EOI) */
-static void ack_VIC_CPI(__u8 cpi)
-{
-#ifdef VOYAGER_DEBUG
-	unsigned long flags;
-	__u16 isr;
-	__u8 cpu = smp_processor_id();
-
-	local_irq_save(flags);
-	isr = vic_read_isr();
-	if ((isr & (1 << (cpi & 7))) == 0) {
-		printk("VOYAGER SMP: CPU%d lost CPI%d\n", cpu, cpi);
-	}
-#endif
-	/* send specific EOI; the two system interrupts have
-	 * bit 4 set for a separate vector but behave as the
-	 * corresponding 3 bit intr */
-	outb_p(0x60 | (cpi & 7), 0x20);
-
-#ifdef VOYAGER_DEBUG
-	if ((vic_read_isr() & (1 << (cpi & 7))) != 0) {
-		printk("VOYAGER SMP: CPU%d still asserting CPI%d\n", cpu, cpi);
-	}
-	local_irq_restore(flags);
-#endif
-}
-
-/* cribbed with thanks from irq.c */
-#define __byte(x,y)	(((unsigned char *)&(y))[x])
-#define cached_21(cpu)	(__byte(0,vic_irq_mask[cpu]))
-#define cached_A1(cpu)	(__byte(1,vic_irq_mask[cpu]))
-
-static unsigned int startup_vic_irq(unsigned int irq)
-{
-	unmask_vic_irq(irq);
-
-	return 0;
-}
-
-/* The enable and disable routines.  This is where we run into
- * conflicting architectural philosophy.  Fundamentally, the voyager
- * architecture does not expect to have to disable interrupts globally
- * (the IRQ controllers belong to each CPU).  The processor masquerade
- * which is used to start the system shouldn't be used in a running OS
- * since it will cause great confusion if two separate CPUs drive to
- * the same IRQ controller (I know, I've tried it).
- *
- * The solution is a variant on the NCR lazy SPL design:
- *
- * 1) To disable an interrupt, do nothing (other than set the
- *    IRQ_DISABLED flag).  This dares the interrupt actually to arrive.
- *
- * 2) If the interrupt dares to come in, raise the local mask against
- *    it (this will result in all the CPU masks being raised
- *    eventually).
- *
- * 3) To enable the interrupt, lower the mask on the local CPU and
- *    broadcast an Interrupt enable CPI which causes all other CPUs to
- *    adjust their masks accordingly.  */
-
-static void unmask_vic_irq(unsigned int irq)
-{
-	/* linux doesn't to processor-irq affinity, so enable on
-	 * all CPUs we know about */
-	int cpu = smp_processor_id(), real_cpu;
-	__u16 mask = (1 << irq);
-	__u32 processorList = 0;
-	unsigned long flags;
-
-	VDEBUG(("VOYAGER: unmask_vic_irq(%d) CPU%d affinity 0x%lx\n",
-		irq, cpu, cpu_irq_affinity[cpu]));
-	spin_lock_irqsave(&vic_irq_lock, flags);
-	for_each_online_cpu(real_cpu) {
-		if (!(voyager_extended_vic_processors & (1 << real_cpu)))
-			continue;
-		if (!(cpu_irq_affinity[real_cpu] & mask)) {
-			/* irq has no affinity for this CPU, ignore */
-			continue;
-		}
-		if (real_cpu == cpu) {
-			enable_local_vic_irq(irq);
-		} else if (vic_irq_mask[real_cpu] & mask) {
-			vic_irq_enable_mask[real_cpu] |= mask;
-			processorList |= (1 << real_cpu);
-		}
-	}
-	spin_unlock_irqrestore(&vic_irq_lock, flags);
-	if (processorList)
-		send_CPI(processorList, VIC_ENABLE_IRQ_CPI);
-}
-
-static void mask_vic_irq(unsigned int irq)
-{
-	/* lazy disable, do nothing */
-}
-
-static void enable_local_vic_irq(unsigned int irq)
-{
-	__u8 cpu = smp_processor_id();
-	__u16 mask = ~(1 << irq);
-	__u16 old_mask = vic_irq_mask[cpu];
-
-	vic_irq_mask[cpu] &= mask;
-	if (vic_irq_mask[cpu] == old_mask)
-		return;
-
-	VDEBUG(("VOYAGER DEBUG: Enabling irq %d in hardware on CPU %d\n",
-		irq, cpu));
-
-	if (irq & 8) {
-		outb_p(cached_A1(cpu), 0xA1);
-		(void)inb_p(0xA1);
-	} else {
-		outb_p(cached_21(cpu), 0x21);
-		(void)inb_p(0x21);
-	}
-}
-
-static void disable_local_vic_irq(unsigned int irq)
-{
-	__u8 cpu = smp_processor_id();
-	__u16 mask = (1 << irq);
-	__u16 old_mask = vic_irq_mask[cpu];
-
-	if (irq == 7)
-		return;
-
-	vic_irq_mask[cpu] |= mask;
-	if (old_mask == vic_irq_mask[cpu])
-		return;
-
-	VDEBUG(("VOYAGER DEBUG: Disabling irq %d in hardware on CPU %d\n",
-		irq, cpu));
-
-	if (irq & 8) {
-		outb_p(cached_A1(cpu), 0xA1);
-		(void)inb_p(0xA1);
-	} else {
-		outb_p(cached_21(cpu), 0x21);
-		(void)inb_p(0x21);
-	}
-}
-
-/* The VIC is level triggered, so the ack can only be issued after the
- * interrupt completes.  However, we do Voyager lazy interrupt
- * handling here: It is an extremely expensive operation to mask an
- * interrupt in the vic, so we merely set a flag (IRQ_DISABLED).  If
- * this interrupt actually comes in, then we mask and ack here to push
- * the interrupt off to another CPU */
-static void before_handle_vic_irq(unsigned int irq)
-{
-	irq_desc_t *desc = irq_to_desc(irq);
-	__u8 cpu = smp_processor_id();
-
-	_raw_spin_lock(&vic_irq_lock);
-	vic_intr_total++;
-	vic_intr_count[cpu]++;
-
-	if (!(cpu_irq_affinity[cpu] & (1 << irq))) {
-		/* The irq is not in our affinity mask, push it off
-		 * onto another CPU */
-		VDEBUG(("VOYAGER DEBUG: affinity triggered disable of irq %d "
-			"on cpu %d\n", irq, cpu));
-		disable_local_vic_irq(irq);
-		/* set IRQ_INPROGRESS to prevent the handler in irq.c from
-		 * actually calling the interrupt routine */
-		desc->status |= IRQ_REPLAY | IRQ_INPROGRESS;
-	} else if (desc->status & IRQ_DISABLED) {
-		/* Damn, the interrupt actually arrived, do the lazy
-		 * disable thing. The interrupt routine in irq.c will
-		 * not handle a IRQ_DISABLED interrupt, so nothing more
-		 * need be done here */
-		VDEBUG(("VOYAGER DEBUG: lazy disable of irq %d on CPU %d\n",
-			irq, cpu));
-		disable_local_vic_irq(irq);
-		desc->status |= IRQ_REPLAY;
-	} else {
-		desc->status &= ~IRQ_REPLAY;
-	}
-
-	_raw_spin_unlock(&vic_irq_lock);
-}
-
-/* Finish the VIC interrupt: basically mask */
-static void after_handle_vic_irq(unsigned int irq)
-{
-	irq_desc_t *desc = irq_to_desc(irq);
-
-	_raw_spin_lock(&vic_irq_lock);
-	{
-		unsigned int status = desc->status & ~IRQ_INPROGRESS;
-#ifdef VOYAGER_DEBUG
-		__u16 isr;
-#endif
-
-		desc->status = status;
-		if ((status & IRQ_DISABLED))
-			disable_local_vic_irq(irq);
-#ifdef VOYAGER_DEBUG
-		/* DEBUG: before we ack, check what's in progress */
-		isr = vic_read_isr();
-		if ((isr & (1 << irq) && !(status & IRQ_REPLAY)) == 0) {
-			int i;
-			__u8 cpu = smp_processor_id();
-			__u8 real_cpu;
-			int mask;	/* Um... initialize me??? --RR */
-
-			printk("VOYAGER SMP: CPU%d lost interrupt %d\n",
-			       cpu, irq);
-			for_each_possible_cpu(real_cpu, mask) {
-
-				outb(VIC_CPU_MASQUERADE_ENABLE | real_cpu,
-				     VIC_PROCESSOR_ID);
-				isr = vic_read_isr();
-				if (isr & (1 << irq)) {
-					printk
-					    ("VOYAGER SMP: CPU%d ack irq %d\n",
-					     real_cpu, irq);
-					ack_vic_irq(irq);
-				}
-				outb(cpu, VIC_PROCESSOR_ID);
-			}
-		}
-#endif /* VOYAGER_DEBUG */
-		/* as soon as we ack, the interrupt is eligible for
-		 * receipt by another CPU so everything must be in
-		 * order here  */
-		ack_vic_irq(irq);
-		if (status & IRQ_REPLAY) {
-			/* replay is set if we disable the interrupt
-			 * in the before_handle_vic_irq() routine, so
-			 * clear the in progress bit here to allow the
-			 * next CPU to handle this correctly */
-			desc->status &= ~(IRQ_REPLAY | IRQ_INPROGRESS);
-		}
-#ifdef VOYAGER_DEBUG
-		isr = vic_read_isr();
-		if ((isr & (1 << irq)) != 0)
-			printk("VOYAGER SMP: after_handle_vic_irq() after "
-			       "ack irq=%d, isr=0x%x\n", irq, isr);
-#endif /* VOYAGER_DEBUG */
-	}
-	_raw_spin_unlock(&vic_irq_lock);
-
-	/* All code after this point is out of the main path - the IRQ
-	 * may be intercepted by another CPU if reasserted */
-}
-
-/* Linux processor - interrupt affinity manipulations.
- *
- * For each processor, we maintain a 32 bit irq affinity mask.
- * Initially it is set to all 1's so every processor accepts every
- * interrupt.  In this call, we change the processor's affinity mask:
- *
- * Change from enable to disable:
- *
- * If the interrupt ever comes in to the processor, we will disable it
- * and ack it to push it off to another CPU, so just accept the mask here.
- *
- * Change from disable to enable:
- *
- * change the mask and then do an interrupt enable CPI to re-enable on
- * the selected processors */
-
-void set_vic_irq_affinity(unsigned int irq, const struct cpumask *mask)
-{
-	/* Only extended processors handle interrupts */
-	unsigned long real_mask;
-	unsigned long irq_mask = 1 << irq;
-	int cpu;
-
-	real_mask = cpus_addr(*mask)[0] & voyager_extended_vic_processors;
-
-	if (cpus_addr(*mask)[0] == 0)
-		/* can't have no CPUs to accept the interrupt -- extremely
-		 * bad things will happen */
-		return;
-
-	if (irq == 0)
-		/* can't change the affinity of the timer IRQ.  This
-		 * is due to the constraint in the voyager
-		 * architecture that the CPI also comes in on and IRQ
-		 * line and we have chosen IRQ0 for this.  If you
-		 * raise the mask on this interrupt, the processor
-		 * will no-longer be able to accept VIC CPIs */
-		return;
-
-	if (irq >= 32)
-		/* You can only have 32 interrupts in a voyager system
-		 * (and 32 only if you have a secondary microchannel
-		 * bus) */
-		return;
-
-	for_each_online_cpu(cpu) {
-		unsigned long cpu_mask = 1 << cpu;
-
-		if (cpu_mask & real_mask) {
-			/* enable the interrupt for this cpu */
-			cpu_irq_affinity[cpu] |= irq_mask;
-		} else {
-			/* disable the interrupt for this cpu */
-			cpu_irq_affinity[cpu] &= ~irq_mask;
-		}
-	}
-	/* this is magic, we now have the correct affinity maps, so
-	 * enable the interrupt.  This will send an enable CPI to
-	 * those CPUs who need to enable it in their local masks,
-	 * causing them to correct for the new affinity . If the
-	 * interrupt is currently globally disabled, it will simply be
-	 * disabled again as it comes in (voyager lazy disable).  If
-	 * the affinity map is tightened to disable the interrupt on a
-	 * cpu, it will be pushed off when it comes in */
-	unmask_vic_irq(irq);
-}
-
-static void ack_vic_irq(unsigned int irq)
-{
-	if (irq & 8) {
-		outb(0x62, 0x20);	/* Specific EOI to cascade */
-		outb(0x60 | (irq & 7), 0xA0);
-	} else {
-		outb(0x60 | (irq & 7), 0x20);
-	}
-}
-
-/* enable the CPIs.  In the VIC, the CPIs are delivered by the 8259
- * but are not vectored by it.  This means that the 8259 mask must be
- * lowered to receive them */
-static __init void vic_enable_cpi(void)
-{
-	__u8 cpu = smp_processor_id();
-
-	/* just take a copy of the current mask (nop for boot cpu) */
-	vic_irq_mask[cpu] = vic_irq_mask[boot_cpu_id];
-
-	enable_local_vic_irq(VIC_CPI_LEVEL0);
-	enable_local_vic_irq(VIC_CPI_LEVEL1);
-	/* for sys int and cmn int */
-	enable_local_vic_irq(7);
-
-	if (is_cpu_quad()) {
-		outb(QIC_DEFAULT_MASK0, QIC_MASK_REGISTER0);
-		outb(QIC_CPI_ENABLE, QIC_MASK_REGISTER1);
-		VDEBUG(("VOYAGER SMP: QIC ENABLE CPI: CPU%d: MASK 0x%x\n",
-			cpu, QIC_CPI_ENABLE));
-	}
-
-	VDEBUG(("VOYAGER SMP: ENABLE CPI: CPU%d: MASK 0x%x\n",
-		cpu, vic_irq_mask[cpu]));
-}
-
-void voyager_smp_dump()
-{
-	int old_cpu = smp_processor_id(), cpu;
-
-	/* dump the interrupt masks of each processor */
-	for_each_online_cpu(cpu) {
-		__u16 imr, isr, irr;
-		unsigned long flags;
-
-		local_irq_save(flags);
-		outb(VIC_CPU_MASQUERADE_ENABLE | cpu, VIC_PROCESSOR_ID);
-		imr = (inb(0xa1) << 8) | inb(0x21);
-		outb(0x0a, 0xa0);
-		irr = inb(0xa0) << 8;
-		outb(0x0a, 0x20);
-		irr |= inb(0x20);
-		outb(0x0b, 0xa0);
-		isr = inb(0xa0) << 8;
-		outb(0x0b, 0x20);
-		isr |= inb(0x20);
-		outb(old_cpu, VIC_PROCESSOR_ID);
-		local_irq_restore(flags);
-		printk("\tCPU%d: mask=0x%x, IMR=0x%x, IRR=0x%x, ISR=0x%x\n",
-		       cpu, vic_irq_mask[cpu], imr, irr, isr);
-#if 0
-		/* These lines are put in to try to unstick an un ack'd irq */
-		if (isr != 0) {
-			int irq;
-			for (irq = 0; irq < 16; irq++) {
-				if (isr & (1 << irq)) {
-					printk("\tCPU%d: ack irq %d\n",
-					       cpu, irq);
-					local_irq_save(flags);
-					outb(VIC_CPU_MASQUERADE_ENABLE | cpu,
-					     VIC_PROCESSOR_ID);
-					ack_vic_irq(irq);
-					outb(old_cpu, VIC_PROCESSOR_ID);
-					local_irq_restore(flags);
-				}
-			}
-		}
-#endif
-	}
-}
-
-void smp_voyager_power_off(void *dummy)
-{
-	if (smp_processor_id() == boot_cpu_id)
-		voyager_power_off();
-	else
-		smp_stop_cpu_function(NULL);
-}
-
-static void __init voyager_smp_prepare_cpus(unsigned int max_cpus)
-{
-	/* FIXME: ignore max_cpus for now */
-	smp_boot_cpus();
-}
-
-static void __cpuinit voyager_smp_prepare_boot_cpu(void)
-{
-	int cpu = smp_processor_id();
-	switch_to_new_gdt(cpu);
-
-	cpu_set(cpu, cpu_online_map);
-	cpu_set(cpu, cpu_callout_map);
-	cpu_set(cpu, cpu_possible_map);
-	cpu_set(cpu, cpu_present_map);
-
-}
-
-static int __cpuinit voyager_cpu_up(unsigned int cpu)
-{
-	/* This only works at boot for x86.  See "rewrite" above. */
-	if (cpu_isset(cpu, smp_commenced_mask))
-		return -ENOSYS;
-
-	/* In case one didn't come up */
-	if (!cpu_isset(cpu, cpu_callin_map))
-		return -EIO;
-	/* Unleash the CPU! */
-	cpu_set(cpu, smp_commenced_mask);
-	while (!cpu_online(cpu))
-		mb();
-	return 0;
-}
-
-static void __init voyager_smp_cpus_done(unsigned int max_cpus)
-{
-	zap_low_mappings();
-}
-
-void __init smp_setup_processor_id(void)
-{
-	current_thread_info()->cpu = hard_smp_processor_id();
-}
-
-static void voyager_send_call_func(const struct cpumask *callmask)
-{
-	__u32 mask = cpus_addr(*callmask)[0] & ~(1 << smp_processor_id());
-	send_CPI(mask, VIC_CALL_FUNCTION_CPI);
-}
-
-static void voyager_send_call_func_single(int cpu)
-{
-	send_CPI(1 << cpu, VIC_CALL_FUNCTION_SINGLE_CPI);
-}
-
-struct smp_ops smp_ops = {
-	.smp_prepare_boot_cpu = voyager_smp_prepare_boot_cpu,
-	.smp_prepare_cpus = voyager_smp_prepare_cpus,
-	.cpu_up = voyager_cpu_up,
-	.smp_cpus_done = voyager_smp_cpus_done,
-
-	.smp_send_stop = voyager_smp_send_stop,
-	.smp_send_reschedule = voyager_smp_send_reschedule,
-
-	.send_call_func_ipi = voyager_send_call_func,
-	.send_call_func_single_ipi = voyager_send_call_func_single,
-};
diff --git a/arch/x86/mach-voyager/voyager_thread.c b/arch/x86/mach-voyager/voyager_thread.c
deleted file mode 100644
index 15464a20fb38..000000000000
--- a/arch/x86/mach-voyager/voyager_thread.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/* -*- mode: c; c-basic-offset: 8 -*- */
-
-/* Copyright (C) 2001
- *
- * Author: J.E.J.Bottomley@HansenPartnership.com
- *
- * This module provides the machine status monitor thread for the
- * voyager architecture.  This allows us to monitor the machine
- * environment (temp, voltage, fan function) and the front panel and
- * internal UPS.  If a fault is detected, this thread takes corrective
- * action (usually just informing init)
- * */
-
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/kernel_stat.h>
-#include <linux/delay.h>
-#include <linux/mc146818rtc.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/kmod.h>
-#include <linux/completion.h>
-#include <linux/sched.h>
-#include <linux/kthread.h>
-#include <asm/desc.h>
-#include <asm/voyager.h>
-#include <asm/vic.h>
-#include <asm/mtrr.h>
-#include <asm/msr.h>
-
-struct task_struct *voyager_thread;
-static __u8 set_timeout;
-
-static int execute(const char *string)
-{
-	int ret;
-
-	char *envp[] = {
-		"HOME=/",
-		"TERM=linux",
-		"PATH=/sbin:/usr/sbin:/bin:/usr/bin",
-		NULL,
-	};
-	char *argv[] = {
-		"/bin/bash",
-		"-c",
-		(char *)string,
-		NULL,
-	};
-
-	if ((ret =
-	     call_usermodehelper(argv[0], argv, envp, UMH_WAIT_PROC)) != 0) {
-		printk(KERN_ERR "Voyager failed to run \"%s\": %i\n", string,
-		       ret);
-	}
-	return ret;
-}
-
-static void check_from_kernel(void)
-{
-	if (voyager_status.switch_off) {
-
-		/* FIXME: This should be configurable via proc */
-		execute("umask 600; echo 0 > /etc/initrunlvl; kill -HUP 1");
-	} else if (voyager_status.power_fail) {
-		VDEBUG(("Voyager daemon detected AC power failure\n"));
-
-		/* FIXME: This should be configureable via proc */
-		execute("umask 600; echo F > /etc/powerstatus; kill -PWR 1");
-		set_timeout = 1;
-	}
-}
-
-static void check_continuing_condition(void)
-{
-	if (voyager_status.power_fail) {
-		__u8 data;
-		voyager_cat_psi(VOYAGER_PSI_SUBREAD,
-				VOYAGER_PSI_AC_FAIL_REG, &data);
-		if ((data & 0x1f) == 0) {
-			/* all power restored */
-			printk(KERN_NOTICE
-			       "VOYAGER AC power restored, cancelling shutdown\n");
-			/* FIXME: should be user configureable */
-			execute
-			    ("umask 600; echo O > /etc/powerstatus; kill -PWR 1");
-			set_timeout = 0;
-		}
-	}
-}
-
-static int thread(void *unused)
-{
-	printk(KERN_NOTICE "Voyager starting monitor thread\n");
-
-	for (;;) {
-		set_current_state(TASK_INTERRUPTIBLE);
-		schedule_timeout(set_timeout ? HZ : MAX_SCHEDULE_TIMEOUT);
-
-		VDEBUG(("Voyager Daemon awoken\n"));
-		if (voyager_status.request_from_kernel == 0) {
-			/* probably awoken from timeout */
-			check_continuing_condition();
-		} else {
-			check_from_kernel();
-			voyager_status.request_from_kernel = 0;
-		}
-	}
-}
-
-static int __init voyager_thread_start(void)
-{
-	voyager_thread = kthread_run(thread, NULL, "kvoyagerd");
-	if (IS_ERR(voyager_thread)) {
-		printk(KERN_ERR
-		       "Voyager: Failed to create system monitor thread.\n");
-		return PTR_ERR(voyager_thread);
-	}
-	return 0;
-}
-
-static void __exit voyager_thread_stop(void)
-{
-	kthread_stop(voyager_thread);
-}
-
-module_init(voyager_thread_start);
-module_exit(voyager_thread_stop);
diff --git a/arch/x86/xen/Kconfig b/arch/x86/xen/Kconfig
index 87b9ab166423..b83e119fbeb0 100644
--- a/arch/x86/xen/Kconfig
+++ b/arch/x86/xen/Kconfig
@@ -6,7 +6,7 @@ config XEN
 	bool "Xen guest support"
 	select PARAVIRT
 	select PARAVIRT_CLOCK
-	depends on X86_64 || (X86_32 && X86_PAE && !(X86_VISWS || X86_VOYAGER))
+	depends on X86_64 || (X86_32 && X86_PAE && !X86_VISWS)
 	depends on X86_CMPXCHG && X86_TSC
 	help
 	  This is the Linux Xen port.  Enabling this will allow the