Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights:

   1) Support SPI based w5100 devices, from Akinobu Mita.

   2) Partial Segmentation Offload, from Alexander Duyck.

   3) Add GMAC4 support to stmmac driver, from Alexandre TORGUE.

   4) Allow cls_flower stats offload, from Amir Vadai.

   5) Implement bpf blinding, from Daniel Borkmann.

   6) Optimize _ASYNC_ bit twiddling on sockets, unless the socket is
      actually using FASYNC these atomics are superfluous.  From Eric
      Dumazet.

   7) Run TCP more preemptibly, also from Eric Dumazet.

   8) Support LED blinking, EEPROM dumps, and rxvlan offloading in mlx5e
      driver, from Gal Pressman.

   9) Allow creating ppp devices via rtnetlink, from Guillaume Nault.

  10) Improve BPF usage documentation, from Jesper Dangaard Brouer.

  11) Support tunneling offloads in qed, from Manish Chopra.

  12) aRFS offloading in mlx5e, from Maor Gottlieb.

  13) Add RFS and RPS support to SCTP protocol, from Marcelo Ricardo
      Leitner.

  14) Add MSG_EOR support to TCP, this allows controlling packet
      coalescing on application record boundaries for more accurate
      socket timestamp sampling.  From Martin KaFai Lau.

  15) Fix alignment of 64-bit netlink attributes across the board, from
      Nicolas Dichtel.

  16) Per-vlan stats in bridging, from Nikolay Aleksandrov.

  17) Several conversions of drivers to ethtool ksettings, from Philippe
      Reynes.

  18) Checksum neutral ILA in ipv6, from Tom Herbert.

  19) Factorize all of the various marvell dsa drivers into one, from
      Vivien Didelot

  20) Add VF support to qed driver, from Yuval Mintz"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1649 commits)
  Revert "phy dp83867: Fix compilation with CONFIG_OF_MDIO=m"
  Revert "phy dp83867: Make rgmii parameters optional"
  r8169: default to 64-bit DMA on recent PCIe chips
  phy dp83867: Make rgmii parameters optional
  phy dp83867: Fix compilation with CONFIG_OF_MDIO=m
  bpf: arm64: remove callee-save registers use for tmp registers
  asix: Fix offset calculation in asix_rx_fixup() causing slow transmissions
  switchdev: pass pointer to fib_info instead of copy
  net_sched: close another race condition in tcf_mirred_release()
  tipc: fix nametable publication field in nl compat
  drivers: net: Don't print unpopulated net_device name
  qed: add support for dcbx.
  ravb: Add missing free_irq() calls to ravb_close()
  qed: Remove a stray tab
  net: ethernet: fec-mpc52xx: use phy_ethtool_{get|set}_link_ksettings
  net: ethernet: fec-mpc52xx: use phydev from struct net_device
  bpf, doc: fix typo on bpf_asm descriptions
  stmmac: hardware TX COE doesn't work when force_thresh_dma_mode is set
  net: ethernet: fs-enet: use phy_ethtool_{get|set}_link_ksettings
  net: ethernet: fs-enet: use phydev from struct net_device
  ...

2 files changed, 55 insertions, 17 deletions

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 7bb15747fea2..ace79d2da2c3 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -91,7 +91,7 @@ config X86
 	select HAVE_ARCH_SOFT_DIRTY		if X86_64
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE
-	select HAVE_BPF_JIT			if X86_64
+	select HAVE_EBPF_JIT			if X86_64
 	select HAVE_CC_STACKPROTECTOR
 	select HAVE_CMPXCHG_DOUBLE
 	select HAVE_CMPXCHG_LOCAL
diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
index 4286f3618bd0..fe04a04dab8e 100644
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -110,11 +110,16 @@ static void bpf_flush_icache(void *start, void *end)
 	((int)K < 0 ? ((int)K >= SKF_LL_OFF ? func##_negative_offset : func) : func##_positive_offset)
 
 /* pick a register outside of BPF range for JIT internal work */
-#define AUX_REG (MAX_BPF_REG + 1)
+#define AUX_REG (MAX_BPF_JIT_REG + 1)
 
-/* the following table maps BPF registers to x64 registers.
- * x64 register r12 is unused, since if used as base address register
- * in load/store instructions, it always needs an extra byte of encoding
+/* The following table maps BPF registers to x64 registers.
+ *
+ * x64 register r12 is unused, since if used as base address
+ * register in load/store instructions, it always needs an
+ * extra byte of encoding and is callee saved.
+ *
+ *  r9 caches skb->len - skb->data_len
+ * r10 caches skb->data, and used for blinding (if enabled)
  */
 static const int reg2hex[] = {
 	[BPF_REG_0] = 0,  /* rax */
@@ -128,6 +133,7 @@ static const int reg2hex[] = {
 	[BPF_REG_8] = 6,  /* r14 callee saved */
 	[BPF_REG_9] = 7,  /* r15 callee saved */
 	[BPF_REG_FP] = 5, /* rbp readonly */
+	[BPF_REG_AX] = 2, /* r10 temp register */
 	[AUX_REG] = 3,    /* r11 temp register */
 };
 
@@ -141,7 +147,8 @@ static bool is_ereg(u32 reg)
 			     BIT(AUX_REG) |
 			     BIT(BPF_REG_7) |
 			     BIT(BPF_REG_8) |
-			     BIT(BPF_REG_9));
+			     BIT(BPF_REG_9) |
+			     BIT(BPF_REG_AX));
 }
 
 /* add modifiers if 'reg' maps to x64 registers r8..r15 */
@@ -182,6 +189,7 @@ static void jit_fill_hole(void *area, unsigned int size)
 struct jit_context {
 	int cleanup_addr; /* epilogue code offset */
 	bool seen_ld_abs;
+	bool seen_ax_reg;
 };
 
 /* maximum number of bytes emitted while JITing one eBPF insn */
@@ -345,6 +353,7 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
 	struct bpf_insn *insn = bpf_prog->insnsi;
 	int insn_cnt = bpf_prog->len;
 	bool seen_ld_abs = ctx->seen_ld_abs | (oldproglen == 0);
+	bool seen_ax_reg = ctx->seen_ax_reg | (oldproglen == 0);
 	bool seen_exit = false;
 	u8 temp[BPF_MAX_INSN_SIZE + BPF_INSN_SAFETY];
 	int i, cnt = 0;
@@ -367,6 +376,9 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
 		int ilen;
 		u8 *func;
 
+		if (dst_reg == BPF_REG_AX || src_reg == BPF_REG_AX)
+			ctx->seen_ax_reg = seen_ax_reg = true;
+
 		switch (insn->code) {
 			/* ALU */
 		case BPF_ALU | BPF_ADD | BPF_X:
@@ -1002,6 +1014,10 @@ common_load:
 			 * sk_load_* helpers also use %r10 and %r9d.
 			 * See bpf_jit.S
 			 */
+			if (seen_ax_reg)
+				/* r10 = skb->data, mov %r10, off32(%rbx) */
+				EMIT3_off32(0x4c, 0x8b, 0x93,
+					    offsetof(struct sk_buff, data));
 			EMIT1_off32(0xE8, jmp_offset); /* call */
 			break;
 
@@ -1073,25 +1089,37 @@ void bpf_jit_compile(struct bpf_prog *prog)
 {
 }
 
-void bpf_int_jit_compile(struct bpf_prog *prog)
+struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 {
 	struct bpf_binary_header *header = NULL;
+	struct bpf_prog *tmp, *orig_prog = prog;
 	int proglen, oldproglen = 0;
 	struct jit_context ctx = {};
+	bool tmp_blinded = false;
 	u8 *image = NULL;
 	int *addrs;
 	int pass;
 	int i;
 
 	if (!bpf_jit_enable)
-		return;
+		return orig_prog;
 
-	if (!prog || !prog->len)
-		return;
+	tmp = bpf_jit_blind_constants(prog);
+	/* If blinding was requested and we failed during blinding,
+	 * we must fall back to the interpreter.
+	 */
+	if (IS_ERR(tmp))
+		return orig_prog;
+	if (tmp != prog) {
+		tmp_blinded = true;
+		prog = tmp;
+	}
 
 	addrs = kmalloc(prog->len * sizeof(*addrs), GFP_KERNEL);
-	if (!addrs)
-		return;
+	if (!addrs) {
+		prog = orig_prog;
+		goto out;
+	}
 
 	/* Before first pass, make a rough estimation of addrs[]
 	 * each bpf instruction is translated to less than 64 bytes
@@ -1113,21 +1141,25 @@ void bpf_int_jit_compile(struct bpf_prog *prog)
 			image = NULL;
 			if (header)
 				bpf_jit_binary_free(header);
-			goto out;
+			prog = orig_prog;
+			goto out_addrs;
 		}
 		if (image) {
 			if (proglen != oldproglen) {
 				pr_err("bpf_jit: proglen=%d != oldproglen=%d\n",
 				       proglen, oldproglen);
-				goto out;
+				prog = orig_prog;
+				goto out_addrs;
 			}
 			break;
 		}
 		if (proglen == oldproglen) {
 			header = bpf_jit_binary_alloc(proglen, &image,
 						      1, jit_fill_hole);
-			if (!header)
-				goto out;
+			if (!header) {
+				prog = orig_prog;
+				goto out_addrs;
+			}
 		}
 		oldproglen = proglen;
 	}
@@ -1141,8 +1173,14 @@ void bpf_int_jit_compile(struct bpf_prog *prog)
 		prog->bpf_func = (void *)image;
 		prog->jited = 1;
 	}
-out:
+
+out_addrs:
 	kfree(addrs);
+out:
+	if (tmp_blinded)
+		bpf_jit_prog_release_other(prog, prog == orig_prog ?
+					   tmp : orig_prog);
+	return prog;
 }
 
 void bpf_jit_free(struct bpf_prog *fp)