x86/traps: Initialize DR6 by writing its architectural reset value

commit 5f465c148c61e876b6d6eacd8e8e365f2d47758f upstream.

Initialize DR6 by writing its architectural reset value to avoid
incorrectly zeroing DR6 to clear DR6.BLD at boot time, which leads
to a false bus lock detected warning.

The Intel SDM says:

  1) Certain debug exceptions may clear bits 0-3 of DR6.

  2) BLD induced #DB clears DR6.BLD and any other debug exception
     doesn't modify DR6.BLD.

  3) RTM induced #DB clears DR6.RTM and any other debug exception
     sets DR6.RTM.

  To avoid confusion in identifying debug exceptions, debug handlers
  should set DR6.BLD and DR6.RTM, and clear other DR6 bits before
  returning.

The DR6 architectural reset value 0xFFFF0FF0, already defined as
macro DR6_RESERVED, satisfies these requirements, so just use it to
reinitialize DR6 whenever needed.

Since clear_all_debug_regs() no longer zeros all debug registers,
rename it to initialize_debug_regs() to better reflect its current
behavior.

Since debug_read_clear_dr6() no longer clears DR6, rename it to
debug_read_reset_dr6() to better reflect its current behavior.

Fixes: ebb1064e7c2e9 ("x86/traps: Handle #DB for bus lock")
Reported-by: Sohil Mehta <sohil.mehta@intel.com>
Suggested-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/lkml/06e68373-a92b-472e-8fd9-ba548119770c@intel.com/
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250620231504.2676902-2-xin%40zytor.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 20 insertions, 1 deletions

diff --git a/arch/x86/include/uapi/asm/debugreg.h b/arch/x86/include/uapi/asm/debugreg.h
index 0007ba077c0c..41da492dfb01 100644
--- a/arch/x86/include/uapi/asm/debugreg.h
+++ b/arch/x86/include/uapi/asm/debugreg.h
@@ -15,7 +15,26 @@
    which debugging register was responsible for the trap.  The other bits
    are either reserved or not of interest to us. */
 
-/* Define reserved bits in DR6 which are always set to 1 */
+/*
+ * Define bits in DR6 which are set to 1 by default.
+ *
+ * This is also the DR6 architectural value following Power-up, Reset or INIT.
+ *
+ * Note, with the introduction of Bus Lock Detection (BLD) and Restricted
+ * Transactional Memory (RTM), the DR6 register has been modified:
+ *
+ * 1) BLD flag (bit 11) is no longer reserved to 1 if the CPU supports
+ *    Bus Lock Detection.  The assertion of a bus lock could clear it.
+ *
+ * 2) RTM flag (bit 16) is no longer reserved to 1 if the CPU supports
+ *    restricted transactional memory.  #DB occurred inside an RTM region
+ *    could clear it.
+ *
+ * Apparently, DR6.BLD and DR6.RTM are active low bits.
+ *
+ * As a result, DR6_RESERVED is an incorrect name now, but it is kept for
+ * compatibility.
+ */
 #define DR6_RESERVED	(0xFFFF0FF0)
 
 #define DR_TRAP0	(0x1)		/* db0 */