Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull scheduler updates from Ingo Molnar:

 - massive CPU hotplug rework (Thomas Gleixner)

 - improve migration fairness (Peter Zijlstra)

 - CPU load calculation updates/cleanups (Yuyang Du)

 - cpufreq updates (Steve Muckle)

 - nohz optimizations (Frederic Weisbecker)

 - switch_mm() micro-optimization on x86 (Andy Lutomirski)

 - ... lots of other enhancements, fixes and cleanups.

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (66 commits)
  ARM: Hide finish_arch_post_lock_switch() from modules
  sched/core: Provide a tsk_nr_cpus_allowed() helper
  sched/core: Use tsk_cpus_allowed() instead of accessing ->cpus_allowed
  sched/loadavg: Fix loadavg artifacts on fully idle and on fully loaded systems
  sched/fair: Correct unit of load_above_capacity
  sched/fair: Clean up scale confusion
  sched/nohz: Fix affine unpinned timers mess
  sched/fair: Fix fairness issue on migration
  sched/core: Kill sched_class::task_waking to clean up the migration logic
  sched/fair: Prepare to fix fairness problems on migration
  sched/fair: Move record_wakee()
  sched/core: Fix comment typo in wake_q_add()
  sched/core: Remove unused variable
  sched: Make hrtick_notifier an explicit call
  sched/fair: Make ilb_notifier an explicit call
  sched/hotplug: Make activate() the last hotplug step
  sched/hotplug: Move migration CPU_DYING to sched_cpu_dying()
  sched/migration: Move CPU_ONLINE into scheduler state
  sched/migration: Move calc_load_migrate() into CPU_DYING
  sched/migration: Move prepare transition to SCHED_STARTING state
  ...

1 files changed, 5 insertions, 96 deletions

diff --git a/arch/x86/include/asm/mmu_context.h b/arch/x86/include/asm/mmu_context.h
index 84280029cafd..396348196aa7 100644
--- a/arch/x86/include/asm/mmu_context.h
+++ b/arch/x86/include/asm/mmu_context.h
@@ -115,103 +115,12 @@ static inline void destroy_context(struct mm_struct *mm)
 	destroy_context_ldt(mm);
 }
 
-static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
-			     struct task_struct *tsk)
-{
-	unsigned cpu = smp_processor_id();
+extern void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+		      struct task_struct *tsk);
 
-	if (likely(prev != next)) {
-#ifdef CONFIG_SMP
-		this_cpu_write(cpu_tlbstate.state, TLBSTATE_OK);
-		this_cpu_write(cpu_tlbstate.active_mm, next);
-#endif
-		cpumask_set_cpu(cpu, mm_cpumask(next));
-
-		/*
-		 * Re-load page tables.
-		 *
-		 * This logic has an ordering constraint:
-		 *
-		 *  CPU 0: Write to a PTE for 'next'
-		 *  CPU 0: load bit 1 in mm_cpumask.  if nonzero, send IPI.
-		 *  CPU 1: set bit 1 in next's mm_cpumask
-		 *  CPU 1: load from the PTE that CPU 0 writes (implicit)
-		 *
-		 * We need to prevent an outcome in which CPU 1 observes
-		 * the new PTE value and CPU 0 observes bit 1 clear in
-		 * mm_cpumask.  (If that occurs, then the IPI will never
-		 * be sent, and CPU 0's TLB will contain a stale entry.)
-		 *
-		 * The bad outcome can occur if either CPU's load is
-		 * reordered before that CPU's store, so both CPUs must
-		 * execute full barriers to prevent this from happening.
-		 *
-		 * Thus, switch_mm needs a full barrier between the
-		 * store to mm_cpumask and any operation that could load
-		 * from next->pgd.  TLB fills are special and can happen
-		 * due to instruction fetches or for no reason at all,
-		 * and neither LOCK nor MFENCE orders them.
-		 * Fortunately, load_cr3() is serializing and gives the
-		 * ordering guarantee we need.
-		 *
-		 */
-		load_cr3(next->pgd);
-
-		trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
-
-		/* Stop flush ipis for the previous mm */
-		cpumask_clear_cpu(cpu, mm_cpumask(prev));
-
-		/* Load per-mm CR4 state */
-		load_mm_cr4(next);
-
-#ifdef CONFIG_MODIFY_LDT_SYSCALL
-		/*
-		 * Load the LDT, if the LDT is different.
-		 *
-		 * It's possible that prev->context.ldt doesn't match
-		 * the LDT register.  This can happen if leave_mm(prev)
-		 * was called and then modify_ldt changed
-		 * prev->context.ldt but suppressed an IPI to this CPU.
-		 * In this case, prev->context.ldt != NULL, because we
-		 * never set context.ldt to NULL while the mm still
-		 * exists.  That means that next->context.ldt !=
-		 * prev->context.ldt, because mms never share an LDT.
-		 */
-		if (unlikely(prev->context.ldt != next->context.ldt))
-			load_mm_ldt(next);
-#endif
-	}
-#ifdef CONFIG_SMP
-	  else {
-		this_cpu_write(cpu_tlbstate.state, TLBSTATE_OK);
-		BUG_ON(this_cpu_read(cpu_tlbstate.active_mm) != next);
-
-		if (!cpumask_test_cpu(cpu, mm_cpumask(next))) {
-			/*
-			 * On established mms, the mm_cpumask is only changed
-			 * from irq context, from ptep_clear_flush() while in
-			 * lazy tlb mode, and here. Irqs are blocked during
-			 * schedule, protecting us from simultaneous changes.
-			 */
-			cpumask_set_cpu(cpu, mm_cpumask(next));
-
-			/*
-			 * We were in lazy tlb mode and leave_mm disabled
-			 * tlb flush IPI delivery. We must reload CR3
-			 * to make sure to use no freed page tables.
-			 *
-			 * As above, load_cr3() is serializing and orders TLB
-			 * fills with respect to the mm_cpumask write.
-			 */
-			load_cr3(next->pgd);
-			trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
-			load_mm_cr4(next);
-			load_mm_ldt(next);
-		}
-	}
-#endif
-}
+extern void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next,
+			       struct task_struct *tsk);
+#define switch_mm_irqs_off switch_mm_irqs_off
 
 #define activate_mm(prev, next)			\
 do {						\