Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking changes from David Miller:

 1) Get rid of the error prone NLA_PUT*() macros that used an embedded
    goto.

 2) Kill off the token-ring and MCA networking drivers, from Paul
    Gortmaker.

 3) Reduce high-order allocations made by datagram AF_UNIX sockets, from
    Eric Dumazet.

 4) Add PTP hardware clock support to IGB and IXGBE, from Richard
    Cochran and Jacob Keller.

 5) Allow users to query timestamping capabilities of a card via
    ethtool, from Richard Cochran.

 6) Add loadbalance mode to the teaming driver, from Jiri Pirko.  Part
    of this is that we can now have BPF filters not attached to sockets,
    and the loadbalancing function is calculated using one.

 7) Francois Romieu went through the network drivers removing gratuitous
    uses of netdev->base_addr, perhaps some day we can remove it
    completely but it's used for ISA probing still.

 8) Add a BPF JIT for sparc.  I know, who cares, right? :-)

 9) Move networking sysctl registry away from using the compatability
    mode interfaces in the sysctl code.  From Eric W Biederman.

10) Pavel Emelyanov added a way to save and restore TCP socket state via
    TCP_REPAIR, TCP_REPAIR_QUEUE, and TCP_QUEUE_SEQ socket options as
    well as a way to forcefully bind a socket to a port via the
    sk->sk_reuse value SK_FORCE_REUSE.  There is also a
    TCP_REPAIR_OPTIONS which allows to reinstante the TCP options
    enabled on the connection.

11) Several enhancements from Eric Dumazet that, in particular, can
    enhance splice performance on TCP sockets significantly.

     a) Reset the offset of the per-socket sendmsg page when we know
        we're the only use of the page in linear_to_page().

     b) Add facilities such that skb->data can be backed a page rather
        than SLAB kmalloc'd memory.  In particular devices which were
        receiving into linear RX buffers can now end up providing paged
        data.

    The big result is that code like splice and GRO do not have to copy
    any more.

12) Allow a pure sender to more gracefully handle ACK backlogs in TCP.
    What can happen at high rates is that the sender hasn't grown his
    receive buffer limits at all (he's not receiving data so really
    doesn't need to), but the non-data ACKs consume receive buffer
    space.

    sk_add_backlog() is too aggressive in dropping frames in this case,
    so relax it's requirements by using the receive buffer plus the send
    buffer limit as the backlog limit instead of just the former.

    Also from Eric Dumazet.

13) Add ipv6 support to L2TP, from Benjamin LaHaise, James Chapman, and
    Chris Elston.

14) Implement TCP early retransmit (RFC 5827), from Yuchung Cheng.
    Basically, we can start fast retransmit before hiting the dupack
    threshold under certain conditions.

15) New CODEL active queue management packet scheduler, from Eric
    Dumazet based upon initial work by Dave Taht.

    Basically, the big feature is that packets are dropped (or ECN bits
    are set) based upon how long packets live in the queue, rather than
    the queue length (which is what RED uses).

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1341 commits)
  drivers/net/stmmac: seq_file fix memory leak
  ipv6/exthdrs: strict Pad1 and PadN check
  USB: qmi_wwan: Add ZTE (Vodafone) K3520-Z
  USB: qmi_wwan: Add ZTE (Vodafone) K3765-Z
  USB: qmi_wwan: Make forced int 4 whitelist generic
  net/ipv4: replace simple_strtoul with kstrtoul
  net/ipv4/ipconfig: neaten __setup placement
  net: qmi_wwan: Add Vodafone/Huawei K5005 support
  net: cdc_ether: Add ZTE WWAN matches before generic Ethernet
  ipv6: use skb coalescing in reassembly
  ipv4: use skb coalescing in defragmentation
  net: introduce skb_try_coalesce()
  net:ipv6:fixed space issues relating to operators.
  net:ipv6:fixed a trailing white space issue.
  ipv6: disable GSO on sockets hitting dst_allfrag
  tg3: use netdev_alloc_frag() API
  net: napi_frags_skb() is static
  ppp: avoid false drop_monitor false positives
  ipv6: bool/const conversions phase2
  ipx: Remove spurious NULL checking in ipx_ioctl().
  ...

6 files changed, 1081 insertions, 0 deletions

diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 6c0683d3fcba..5f6acce45a0d 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -30,6 +30,7 @@ config SPARC
 	select USE_GENERIC_SMP_HELPERS if SMP
 	select GENERIC_PCI_IOMAP
 	select HAVE_NMI_WATCHDOG if SPARC64
+	select HAVE_BPF_JIT
 
 config SPARC32
 	def_bool !64BIT
diff --git a/arch/sparc/Makefile b/arch/sparc/Makefile
index eddcfb36aafb..0e5de13b56c5 100644
--- a/arch/sparc/Makefile
+++ b/arch/sparc/Makefile
@@ -66,6 +66,7 @@ head-y                 += arch/sparc/kernel/init_task.o
 
 core-y                 += arch/sparc/kernel/
 core-y                 += arch/sparc/mm/ arch/sparc/math-emu/
+core-y                 += arch/sparc/net/
 
 libs-y                 += arch/sparc/prom/
 libs-y                 += arch/sparc/lib/
diff --git a/arch/sparc/net/Makefile b/arch/sparc/net/Makefile
new file mode 100644
index 000000000000..1306a58ac541
--- /dev/null
+++ b/arch/sparc/net/Makefile
@@ -0,0 +1,4 @@
+#
+# Arch-specific network modules
+#
+obj-$(CONFIG_BPF_JIT) += bpf_jit_asm.o bpf_jit_comp.o
diff --git a/arch/sparc/net/bpf_jit.h b/arch/sparc/net/bpf_jit.h
new file mode 100644
index 000000000000..33d6b375ff12
--- /dev/null
+++ b/arch/sparc/net/bpf_jit.h
@@ -0,0 +1,68 @@
+#ifndef _BPF_JIT_H
+#define _BPF_JIT_H
+
+/* Conventions:
+ *  %g1 : temporary
+ *  %g2 : Secondary temporary used by SKB data helper stubs.
+ *  %g3 : packet offset passed into SKB data helper stubs.
+ *  %o0 : pointer to skb (first argument given to JIT function)
+ *  %o1 : BPF A accumulator
+ *  %o2 : BPF X accumulator
+ *  %o3 : Holds saved %o7 so we can call helper functions without needing
+ *        to allocate a register window.
+ *  %o4 : skb->len - skb->data_len
+ *  %o5 : skb->data
+ */
+
+#ifndef __ASSEMBLER__
+#define G0		0x00
+#define G1		0x01
+#define G3		0x03
+#define G6		0x06
+#define O0		0x08
+#define O1		0x09
+#define O2		0x0a
+#define O3		0x0b
+#define O4		0x0c
+#define O5		0x0d
+#define SP		0x0e
+#define O7		0x0f
+#define FP		0x1e
+
+#define r_SKB		O0
+#define r_A		O1
+#define r_X		O2
+#define r_saved_O7	O3
+#define r_HEADLEN	O4
+#define r_SKB_DATA	O5
+#define r_TMP		G1
+#define r_TMP2		G2
+#define r_OFF		G3
+
+/* assembly code in arch/sparc/net/bpf_jit_asm.S */
+extern u32 bpf_jit_load_word[];
+extern u32 bpf_jit_load_half[];
+extern u32 bpf_jit_load_byte[];
+extern u32 bpf_jit_load_byte_msh[];
+extern u32 bpf_jit_load_word_positive_offset[];
+extern u32 bpf_jit_load_half_positive_offset[];
+extern u32 bpf_jit_load_byte_positive_offset[];
+extern u32 bpf_jit_load_byte_msh_positive_offset[];
+extern u32 bpf_jit_load_word_negative_offset[];
+extern u32 bpf_jit_load_half_negative_offset[];
+extern u32 bpf_jit_load_byte_negative_offset[];
+extern u32 bpf_jit_load_byte_msh_negative_offset[];
+
+#else
+#define r_SKB		%o0
+#define r_A		%o1
+#define r_X		%o2
+#define r_saved_O7	%o3
+#define r_HEADLEN	%o4
+#define r_SKB_DATA	%o5
+#define r_TMP		%g1
+#define r_TMP2		%g2
+#define r_OFF		%g3
+#endif
+
+#endif /* _BPF_JIT_H */
diff --git a/arch/sparc/net/bpf_jit_asm.S b/arch/sparc/net/bpf_jit_asm.S
new file mode 100644
index 000000000000..9d016c7017f7
--- /dev/null
+++ b/arch/sparc/net/bpf_jit_asm.S
@@ -0,0 +1,205 @@
+#include <asm/ptrace.h>
+
+#include "bpf_jit.h"
+
+#ifdef CONFIG_SPARC64
+#define SAVE_SZ		176
+#define SCRATCH_OFF	STACK_BIAS + 128
+#define BE_PTR(label)	be,pn %xcc, label
+#else
+#define SAVE_SZ		96
+#define SCRATCH_OFF	72
+#define BE_PTR(label)	be label
+#endif
+
+#define SKF_MAX_NEG_OFF	(-0x200000) /* SKF_LL_OFF from filter.h */
+
+	.text
+	.globl	bpf_jit_load_word
+bpf_jit_load_word:
+	cmp	r_OFF, 0
+	bl	bpf_slow_path_word_neg
+	 nop
+	.globl	bpf_jit_load_word_positive_offset
+bpf_jit_load_word_positive_offset:
+	sub	r_HEADLEN, r_OFF, r_TMP
+	cmp	r_TMP, 3
+	ble	bpf_slow_path_word
+	 add	r_SKB_DATA, r_OFF, r_TMP
+	andcc	r_TMP, 3, %g0
+	bne	load_word_unaligned
+	 nop
+	retl
+	 ld	[r_TMP], r_A
+load_word_unaligned:
+	ldub	[r_TMP + 0x0], r_OFF
+	ldub	[r_TMP + 0x1], r_TMP2
+	sll	r_OFF, 8, r_OFF
+	or	r_OFF, r_TMP2, r_OFF
+	ldub	[r_TMP + 0x2], r_TMP2
+	sll	r_OFF, 8, r_OFF
+	or	r_OFF, r_TMP2, r_OFF
+	ldub	[r_TMP + 0x3], r_TMP2
+	sll	r_OFF, 8, r_OFF
+	retl
+	 or	r_OFF, r_TMP2, r_A
+
+	.globl	bpf_jit_load_half
+bpf_jit_load_half:
+	cmp	r_OFF, 0
+	bl	bpf_slow_path_half_neg
+	 nop
+	.globl	bpf_jit_load_half_positive_offset
+bpf_jit_load_half_positive_offset:
+	sub	r_HEADLEN, r_OFF, r_TMP
+	cmp	r_TMP, 1
+	ble	bpf_slow_path_half
+	 add	r_SKB_DATA, r_OFF, r_TMP
+	andcc	r_TMP, 1, %g0
+	bne	load_half_unaligned
+	 nop
+	retl
+	 lduh	[r_TMP], r_A
+load_half_unaligned:
+	ldub	[r_TMP + 0x0], r_OFF
+	ldub	[r_TMP + 0x1], r_TMP2
+	sll	r_OFF, 8, r_OFF
+	retl
+	 or	r_OFF, r_TMP2, r_A
+
+	.globl	bpf_jit_load_byte
+bpf_jit_load_byte:
+	cmp	r_OFF, 0
+	bl	bpf_slow_path_byte_neg
+	 nop
+	.globl	bpf_jit_load_byte_positive_offset
+bpf_jit_load_byte_positive_offset:
+	cmp	r_OFF, r_HEADLEN
+	bge	bpf_slow_path_byte
+	 nop
+	retl
+	 ldub	[r_SKB_DATA + r_OFF], r_A
+
+	.globl	bpf_jit_load_byte_msh
+bpf_jit_load_byte_msh:
+	cmp	r_OFF, 0
+	bl	bpf_slow_path_byte_msh_neg
+	 nop
+	.globl	bpf_jit_load_byte_msh_positive_offset
+bpf_jit_load_byte_msh_positive_offset:
+	cmp	r_OFF, r_HEADLEN
+	bge	bpf_slow_path_byte_msh
+	 nop
+	ldub	[r_SKB_DATA + r_OFF], r_OFF
+	and	r_OFF, 0xf, r_OFF
+	retl
+	 sll	r_OFF, 2, r_X
+
+#define bpf_slow_path_common(LEN)	\
+	save	%sp, -SAVE_SZ, %sp;	\
+	mov	%i0, %o0;		\
+	mov	r_OFF, %o1;		\
+	add	%fp, SCRATCH_OFF, %o2;	\
+	call	skb_copy_bits;		\
+	 mov	(LEN), %o3;		\
+	cmp	%o0, 0;			\
+	restore;
+
+bpf_slow_path_word:
+	bpf_slow_path_common(4)
+	bl	bpf_error
+	 ld	[%sp + SCRATCH_OFF], r_A
+	retl
+	 nop
+bpf_slow_path_half:
+	bpf_slow_path_common(2)
+	bl	bpf_error
+	 lduh	[%sp + SCRATCH_OFF], r_A
+	retl
+	 nop
+bpf_slow_path_byte:
+	bpf_slow_path_common(1)
+	bl	bpf_error
+	 ldub	[%sp + SCRATCH_OFF], r_A
+	retl
+	 nop
+bpf_slow_path_byte_msh:
+	bpf_slow_path_common(1)
+	bl	bpf_error
+	 ldub	[%sp + SCRATCH_OFF], r_A
+	and	r_OFF, 0xf, r_OFF
+	retl
+	 sll	r_OFF, 2, r_X
+
+#define bpf_negative_common(LEN)			\
+	save	%sp, -SAVE_SZ, %sp;			\
+	mov	%i0, %o0;				\
+	mov	r_OFF, %o1;				\
+	call	bpf_internal_load_pointer_neg_helper;	\
+	 mov	(LEN), %o2;				\
+	mov	%o0, r_TMP;				\
+	cmp	%o0, 0;					\
+	BE_PTR(bpf_error);				\
+	 restore;
+
+bpf_slow_path_word_neg:
+	sethi	%hi(SKF_MAX_NEG_OFF), r_TMP
+	cmp	r_OFF, r_TMP
+	bl	bpf_error
+	 nop
+	.globl	bpf_jit_load_word_negative_offset
+bpf_jit_load_word_negative_offset:
+	bpf_negative_common(4)
+	andcc	r_TMP, 3, %g0
+	bne	load_word_unaligned
+	 nop
+	retl
+	 ld	[r_TMP], r_A
+
+bpf_slow_path_half_neg:
+	sethi	%hi(SKF_MAX_NEG_OFF), r_TMP
+	cmp	r_OFF, r_TMP
+	bl	bpf_error
+	 nop
+	.globl	bpf_jit_load_half_negative_offset
+bpf_jit_load_half_negative_offset:
+	bpf_negative_common(2)
+	andcc	r_TMP, 1, %g0
+	bne	load_half_unaligned
+	 nop
+	retl
+	 lduh	[r_TMP], r_A
+
+bpf_slow_path_byte_neg:
+	sethi	%hi(SKF_MAX_NEG_OFF), r_TMP
+	cmp	r_OFF, r_TMP
+	bl	bpf_error
+	 nop
+	.globl	bpf_jit_load_byte_negative_offset
+bpf_jit_load_byte_negative_offset:
+	bpf_negative_common(1)
+	retl
+	 ldub	[r_TMP], r_A
+
+bpf_slow_path_byte_msh_neg:
+	sethi	%hi(SKF_MAX_NEG_OFF), r_TMP
+	cmp	r_OFF, r_TMP
+	bl	bpf_error
+	 nop
+	.globl	bpf_jit_load_byte_msh_negative_offset
+bpf_jit_load_byte_msh_negative_offset:
+	bpf_negative_common(1)
+	ldub	[r_TMP], r_OFF
+	and	r_OFF, 0xf, r_OFF
+	retl
+	 sll	r_OFF, 2, r_X
+
+bpf_error:
+	/* Make the JIT program return zero.  The JIT epilogue
+	 * stores away the original %o7 into r_saved_O7.  The
+	 * normal leaf function return is to use "retl" which
+	 * would evalute to "jmpl %o7 + 8, %g0" but we want to
+	 * use the saved value thus the sequence you see here.
+	 */
+	jmpl	r_saved_O7 + 8, %g0
+	 clr	%o0
diff --git a/arch/sparc/net/bpf_jit_comp.c b/arch/sparc/net/bpf_jit_comp.c
new file mode 100644
index 000000000000..1a69244e785b
--- /dev/null
+++ b/arch/sparc/net/bpf_jit_comp.c
@@ -0,0 +1,802 @@
+#include <linux/moduleloader.h>
+#include <linux/workqueue.h>
+#include <linux/netdevice.h>
+#include <linux/filter.h>
+#include <linux/cache.h>
+
+#include <asm/cacheflush.h>
+#include <asm/ptrace.h>
+
+#include "bpf_jit.h"
+
+int bpf_jit_enable __read_mostly;
+
+static inline bool is_simm13(unsigned int value)
+{
+	return value + 0x1000 < 0x2000;
+}
+
+static void bpf_flush_icache(void *start_, void *end_)
+{
+#ifdef CONFIG_SPARC64
+	/* Cheetah's I-cache is fully coherent.  */
+	if (tlb_type == spitfire) {
+		unsigned long start = (unsigned long) start_;
+		unsigned long end = (unsigned long) end_;
+
+		start &= ~7UL;
+		end = (end + 7UL) & ~7UL;
+		while (start < end) {
+			flushi(start);
+			start += 32;
+		}
+	}
+#endif
+}
+
+#define SEEN_DATAREF 1 /* might call external helpers */
+#define SEEN_XREG    2 /* ebx is used */
+#define SEEN_MEM     4 /* use mem[] for temporary storage */
+
+#define S13(X)		((X) & 0x1fff)
+#define IMMED		0x00002000
+#define RD(X)		((X) << 25)
+#define RS1(X)		((X) << 14)
+#define RS2(X)		((X))
+#define OP(X)		((X) << 30)
+#define OP2(X)		((X) << 22)
+#define OP3(X)		((X) << 19)
+#define COND(X)		((X) << 25)
+#define F1(X)		OP(X)
+#define F2(X, Y)	(OP(X) | OP2(Y))
+#define F3(X, Y)	(OP(X) | OP3(Y))
+
+#define CONDN		COND(0x0)
+#define CONDE		COND(0x1)
+#define CONDLE		COND(0x2)
+#define CONDL		COND(0x3)
+#define CONDLEU		COND(0x4)
+#define CONDCS		COND(0x5)
+#define CONDNEG		COND(0x6)
+#define CONDVC		COND(0x7)
+#define CONDA		COND(0x8)
+#define CONDNE		COND(0x9)
+#define CONDG		COND(0xa)
+#define CONDGE		COND(0xb)
+#define CONDGU		COND(0xc)
+#define CONDCC		COND(0xd)
+#define CONDPOS		COND(0xe)
+#define CONDVS		COND(0xf)
+
+#define CONDGEU		CONDCC
+#define CONDLU		CONDCS
+
+#define WDISP22(X)	(((X) >> 2) & 0x3fffff)
+
+#define BA		(F2(0, 2) | CONDA)
+#define BGU		(F2(0, 2) | CONDGU)
+#define BLEU		(F2(0, 2) | CONDLEU)
+#define BGEU		(F2(0, 2) | CONDGEU)
+#define BLU		(F2(0, 2) | CONDLU)
+#define BE		(F2(0, 2) | CONDE)
+#define BNE		(F2(0, 2) | CONDNE)
+
+#ifdef CONFIG_SPARC64
+#define BNE_PTR		(F2(0, 1) | CONDNE | (2 << 20))
+#else
+#define BNE_PTR		BNE
+#endif
+
+#define SETHI(K, REG)	\
+	(F2(0, 0x4) | RD(REG) | (((K) >> 10) & 0x3fffff))
+#define OR_LO(K, REG)	\
+	(F3(2, 0x02) | IMMED | RS1(REG) | ((K) & 0x3ff) | RD(REG))
+
+#define ADD		F3(2, 0x00)
+#define AND		F3(2, 0x01)
+#define ANDCC		F3(2, 0x11)
+#define OR		F3(2, 0x02)
+#define SUB		F3(2, 0x04)
+#define SUBCC		F3(2, 0x14)
+#define MUL		F3(2, 0x0a)	/* umul */
+#define DIV		F3(2, 0x0e)	/* udiv */
+#define SLL		F3(2, 0x25)
+#define SRL		F3(2, 0x26)
+#define JMPL		F3(2, 0x38)
+#define CALL		F1(1)
+#define BR		F2(0, 0x01)
+#define RD_Y		F3(2, 0x28)
+#define WR_Y		F3(2, 0x30)
+
+#define LD32		F3(3, 0x00)
+#define LD8		F3(3, 0x01)
+#define LD16		F3(3, 0x02)
+#define LD64		F3(3, 0x0b)
+#define ST32		F3(3, 0x04)
+
+#ifdef CONFIG_SPARC64
+#define LDPTR		LD64
+#define BASE_STACKFRAME	176
+#else
+#define LDPTR		LD32
+#define BASE_STACKFRAME	96
+#endif
+
+#define LD32I		(LD32 | IMMED)
+#define LD8I		(LD8 | IMMED)
+#define LD16I		(LD16 | IMMED)
+#define LD64I		(LD64 | IMMED)
+#define LDPTRI		(LDPTR | IMMED)
+#define ST32I		(ST32 | IMMED)
+
+#define emit_nop()		\
+do {				\
+	*prog++ = SETHI(0, G0);	\
+} while (0)
+
+#define emit_neg()					\
+do {	/* sub %g0, r_A, r_A */				\
+	*prog++ = SUB | RS1(G0) | RS2(r_A) | RD(r_A);	\
+} while (0)
+
+#define emit_reg_move(FROM, TO)				\
+do {	/* or %g0, FROM, TO */				\
+	*prog++ = OR | RS1(G0) | RS2(FROM) | RD(TO);	\
+} while (0)
+
+#define emit_clear(REG)					\
+do {	/* or %g0, %g0, REG */				\
+	*prog++ = OR | RS1(G0) | RS2(G0) | RD(REG);	\
+} while (0)
+
+#define emit_set_const(K, REG)					\
+do {	/* sethi %hi(K), REG */					\
+	*prog++ = SETHI(K, REG);				\
+	/* or REG, %lo(K), REG */				\
+	*prog++ = OR_LO(K, REG);				\
+} while (0)
+
+	/* Emit
+	 *
+	 *	OP	r_A, r_X, r_A
+	 */
+#define emit_alu_X(OPCODE)					\
+do {								\
+	seen |= SEEN_XREG;					\
+	*prog++ = OPCODE | RS1(r_A) | RS2(r_X) | RD(r_A);	\
+} while (0)
+
+	/* Emit either:
+	 *
+	 *	OP	r_A, K, r_A
+	 *
+	 * or
+	 *
+	 *	sethi	%hi(K), r_TMP
+	 *	or	r_TMP, %lo(K), r_TMP
+	 *	OP	r_A, r_TMP, r_A
+	 *
+	 * depending upon whether K fits in a signed 13-bit
+	 * immediate instruction field.  Emit nothing if K
+	 * is zero.
+	 */
+#define emit_alu_K(OPCODE, K)					\
+do {								\
+	if (K) {						\
+		unsigned int _insn = OPCODE;			\
+		_insn |= RS1(r_A) | RD(r_A);			\
+		if (is_simm13(K)) {				\
+			*prog++ = _insn | IMMED | S13(K);	\
+		} else {					\
+			emit_set_const(K, r_TMP);		\
+			*prog++ = _insn | RS2(r_TMP);		\
+		}						\
+	}							\
+} while (0)
+
+#define emit_loadimm(K, DEST)						\
+do {									\
+	if (is_simm13(K)) {						\
+		/* or %g0, K, DEST */					\
+		*prog++ = OR | IMMED | RS1(G0) | S13(K) | RD(DEST);	\
+	} else {							\
+		emit_set_const(K, DEST);				\
+	}								\
+} while (0)
+
+#define emit_loadptr(BASE, STRUCT, FIELD, DEST)				\
+do {	unsigned int _off = offsetof(STRUCT, FIELD);			\
+	BUILD_BUG_ON(FIELD_SIZEOF(STRUCT, FIELD) != sizeof(void *));	\
+	*prog++ = LDPTRI | RS1(BASE) | S13(_off) | RD(DEST);		\
+} while (0)
+
+#define emit_load32(BASE, STRUCT, FIELD, DEST)				\
+do {	unsigned int _off = offsetof(STRUCT, FIELD);			\
+	BUILD_BUG_ON(FIELD_SIZEOF(STRUCT, FIELD) != sizeof(u32));	\
+	*prog++ = LD32I | RS1(BASE) | S13(_off) | RD(DEST);		\
+} while (0)
+
+#define emit_load16(BASE, STRUCT, FIELD, DEST)				\
+do {	unsigned int _off = offsetof(STRUCT, FIELD);			\
+	BUILD_BUG_ON(FIELD_SIZEOF(STRUCT, FIELD) != sizeof(u16));	\
+	*prog++ = LD16I | RS1(BASE) | S13(_off) | RD(DEST);		\
+} while (0)
+
+#define __emit_load8(BASE, STRUCT, FIELD, DEST)				\
+do {	unsigned int _off = offsetof(STRUCT, FIELD);			\
+	*prog++ = LD8I | RS1(BASE) | S13(_off) | RD(DEST);		\
+} while (0)
+
+#define emit_load8(BASE, STRUCT, FIELD, DEST)				\
+do {	BUILD_BUG_ON(FIELD_SIZEOF(STRUCT, FIELD) != sizeof(u8));	\
+	__emit_load8(BASE, STRUCT, FIELD, DEST);			\
+} while (0)
+
+#define emit_ldmem(OFF, DEST)					\
+do {	*prog++ = LD32I | RS1(FP) | S13(-(OFF)) | RD(DEST);	\
+} while (0)
+
+#define emit_stmem(OFF, SRC)					\
+do {	*prog++ = LD32I | RS1(FP) | S13(-(OFF)) | RD(SRC);	\
+} while (0)
+
+#ifdef CONFIG_SMP
+#ifdef CONFIG_SPARC64
+#define emit_load_cpu(REG)						\
+	emit_load16(G6, struct thread_info, cpu, REG)
+#else
+#define emit_load_cpu(REG)						\
+	emit_load32(G6, struct thread_info, cpu, REG)
+#endif
+#else
+#define emit_load_cpu(REG)	emit_clear(REG)
+#endif
+
+#define emit_skb_loadptr(FIELD, DEST) \
+	emit_loadptr(r_SKB, struct sk_buff, FIELD, DEST)
+#define emit_skb_load32(FIELD, DEST) \
+	emit_load32(r_SKB, struct sk_buff, FIELD, DEST)
+#define emit_skb_load16(FIELD, DEST) \
+	emit_load16(r_SKB, struct sk_buff, FIELD, DEST)
+#define __emit_skb_load8(FIELD, DEST) \
+	__emit_load8(r_SKB, struct sk_buff, FIELD, DEST)
+#define emit_skb_load8(FIELD, DEST) \
+	emit_load8(r_SKB, struct sk_buff, FIELD, DEST)
+
+#define emit_jmpl(BASE, IMM_OFF, LREG) \
+	*prog++ = (JMPL | IMMED | RS1(BASE) | S13(IMM_OFF) | RD(LREG))
+
+#define emit_call(FUNC)					\
+do {	void *_here = image + addrs[i] - 8;		\
+	unsigned int _off = (void *)(FUNC) - _here;	\
+	*prog++ = CALL | (((_off) >> 2) & 0x3fffffff);	\
+	emit_nop();					\
+} while (0)
+
+#define emit_branch(BR_OPC, DEST)			\
+do {	unsigned int _here = addrs[i] - 8;		\
+	*prog++ = BR_OPC | WDISP22((DEST) - _here);	\
+} while (0)
+
+#define emit_branch_off(BR_OPC, OFF)			\
+do {	*prog++ = BR_OPC | WDISP22(OFF);		\
+} while (0)
+
+#define emit_jump(DEST)		emit_branch(BA, DEST)
+
+#define emit_read_y(REG)	*prog++ = RD_Y | RD(REG)
+#define emit_write_y(REG)	*prog++ = WR_Y | IMMED | RS1(REG) | S13(0)
+
+#define emit_cmp(R1, R2) \
+	*prog++ = (SUBCC | RS1(R1) | RS2(R2) | RD(G0))
+
+#define emit_cmpi(R1, IMM) \
+	*prog++ = (SUBCC | IMMED | RS1(R1) | S13(IMM) | RD(G0));
+
+#define emit_btst(R1, R2) \
+	*prog++ = (ANDCC | RS1(R1) | RS2(R2) | RD(G0))
+
+#define emit_btsti(R1, IMM) \
+	*prog++ = (ANDCC | IMMED | RS1(R1) | S13(IMM) | RD(G0));
+
+#define emit_sub(R1, R2, R3) \
+	*prog++ = (SUB | RS1(R1) | RS2(R2) | RD(R3))
+
+#define emit_subi(R1, IMM, R3) \
+	*prog++ = (SUB | IMMED | RS1(R1) | S13(IMM) | RD(R3))
+
+#define emit_add(R1, R2, R3) \
+	*prog++ = (ADD | RS1(R1) | RS2(R2) | RD(R3))
+
+#define emit_addi(R1, IMM, R3) \
+	*prog++ = (ADD | IMMED | RS1(R1) | S13(IMM) | RD(R3))
+
+#define emit_alloc_stack(SZ) \
+	*prog++ = (SUB | IMMED | RS1(SP) | S13(SZ) | RD(SP))
+
+#define emit_release_stack(SZ) \
+	*prog++ = (ADD | IMMED | RS1(SP) | S13(SZ) | RD(SP))
+
+/* A note about branch offset calculations.  The addrs[] array,
+ * indexed by BPF instruction, records the address after all the
+ * sparc instructions emitted for that BPF instruction.
+ *
+ * The most common case is to emit a branch at the end of such
+ * a code sequence.  So this would be two instructions, the
+ * branch and it's delay slot.
+ *
+ * Therefore by default the branch emitters calculate the branch
+ * offset field as:
+ *
+ *	destination - (addrs[i] - 8)
+ *
+ * This "addrs[i] - 8" is the address of the branch itself or
+ * what "." would be in assembler notation.  The "8" part is
+ * how we take into consideration the branch and it's delay
+ * slot mentioned above.
+ *
+ * Sometimes we need to emit a branch earlier in the code
+ * sequence.  And in these situations we adjust "destination"
+ * to accomodate this difference.  For example, if we needed
+ * to emit a branch (and it's delay slot) right before the
+ * final instruction emitted for a BPF opcode, we'd use
+ * "destination + 4" instead of just plain "destination" above.
+ *
+ * This is why you see all of these funny emit_branch() and
+ * emit_jump() calls with adjusted offsets.
+ */
+
+void bpf_jit_compile(struct sk_filter *fp)
+{
+	unsigned int cleanup_addr, proglen, oldproglen = 0;
+	u32 temp[8], *prog, *func, seen = 0, pass;
+	const struct sock_filter *filter = fp->insns;
+	int i, flen = fp->len, pc_ret0 = -1;
+	unsigned int *addrs;
+	void *image;
+
+	if (!bpf_jit_enable)
+		return;
+
+	addrs = kmalloc(flen * sizeof(*addrs), GFP_KERNEL);
+	if (addrs == NULL)
+		return;
+
+	/* Before first pass, make a rough estimation of addrs[]
+	 * each bpf instruction is translated to less than 64 bytes
+	 */
+	for (proglen = 0, i = 0; i < flen; i++) {
+		proglen += 64;
+		addrs[i] = proglen;
+	}
+	cleanup_addr = proglen; /* epilogue address */
+	image = NULL;
+	for (pass = 0; pass < 10; pass++) {
+		u8 seen_or_pass0 = (pass == 0) ? (SEEN_XREG | SEEN_DATAREF | SEEN_MEM) : seen;
+
+		/* no prologue/epilogue for trivial filters (RET something) */
+		proglen = 0;
+		prog = temp;
+
+		/* Prologue */
+		if (seen_or_pass0) {
+			if (seen_or_pass0 & SEEN_MEM) {
+				unsigned int sz = BASE_STACKFRAME;
+				sz += BPF_MEMWORDS * sizeof(u32);
+				emit_alloc_stack(sz);
+			}
+
+			/* Make sure we dont leek kernel memory. */
+			if (seen_or_pass0 & SEEN_XREG)
+				emit_clear(r_X);
+
+			/* If this filter needs to access skb data,
+			 * load %o4 and %o5 with:
+			 *  %o4 = skb->len - skb->data_len
+			 *  %o5 = skb->data
+			 * And also back up %o7 into r_saved_O7 so we can
+			 * invoke the stubs using 'call'.
+			 */
+			if (seen_or_pass0 & SEEN_DATAREF) {
+				emit_load32(r_SKB, struct sk_buff, len, r_HEADLEN);
+				emit_load32(r_SKB, struct sk_buff, data_len, r_TMP);
+				emit_sub(r_HEADLEN, r_TMP, r_HEADLEN);
+				emit_loadptr(r_SKB, struct sk_buff, data, r_SKB_DATA);
+			}
+		}
+		emit_reg_move(O7, r_saved_O7);
+
+		switch (filter[0].code) {
+		case BPF_S_RET_K:
+		case BPF_S_LD_W_LEN:
+		case BPF_S_ANC_PROTOCOL:
+		case BPF_S_ANC_PKTTYPE:
+		case BPF_S_ANC_IFINDEX:
+		case BPF_S_ANC_MARK:
+		case BPF_S_ANC_RXHASH:
+		case BPF_S_ANC_CPU:
+		case BPF_S_ANC_QUEUE:
+		case BPF_S_LD_W_ABS:
+		case BPF_S_LD_H_ABS:
+		case BPF_S_LD_B_ABS:
+			/* The first instruction sets the A register (or is
+			 * a "RET 'constant'")
+			 */
+			break;
+		default:
+			/* Make sure we dont leak kernel information to the
+			 * user.
+			 */
+			emit_clear(r_A); /* A = 0 */
+		}
+
+		for (i = 0; i < flen; i++) {
+			unsigned int K = filter[i].k;
+			unsigned int t_offset;
+			unsigned int f_offset;
+			u32 t_op, f_op;
+			int ilen;
+
+			switch (filter[i].code) {
+			case BPF_S_ALU_ADD_X:	/* A += X; */
+				emit_alu_X(ADD);
+				break;
+			case BPF_S_ALU_ADD_K:	/* A += K; */
+				emit_alu_K(ADD, K);
+				break;
+			case BPF_S_ALU_SUB_X:	/* A -= X; */
+				emit_alu_X(SUB);
+				break;
+			case BPF_S_ALU_SUB_K:	/* A -= K */
+				emit_alu_K(SUB, K);
+				break;
+			case BPF_S_ALU_AND_X:	/* A &= X */
+				emit_alu_X(AND);
+				break;
+			case BPF_S_ALU_AND_K:	/* A &= K */
+				emit_alu_K(AND, K);
+				break;
+			case BPF_S_ALU_OR_X:	/* A |= X */
+				emit_alu_X(OR);
+				break;
+			case BPF_S_ALU_OR_K:	/* A |= K */
+				emit_alu_K(OR, K);
+				break;
+			case BPF_S_ALU_LSH_X:	/* A <<= X */
+				emit_alu_X(SLL);
+				break;
+			case BPF_S_ALU_LSH_K:	/* A <<= K */
+				emit_alu_K(SLL, K);
+				break;
+			case BPF_S_ALU_RSH_X:	/* A >>= X */
+				emit_alu_X(SRL);
+				break;
+			case BPF_S_ALU_RSH_K:	/* A >>= K */
+				emit_alu_K(SRL, K);
+				break;
+			case BPF_S_ALU_MUL_X:	/* A *= X; */
+				emit_alu_X(MUL);
+				break;
+			case BPF_S_ALU_MUL_K:	/* A *= K */
+				emit_alu_K(MUL, K);
+				break;
+			case BPF_S_ALU_DIV_K:	/* A /= K */
+				emit_alu_K(MUL, K);
+				emit_read_y(r_A);
+				break;
+			case BPF_S_ALU_DIV_X:	/* A /= X; */
+				emit_cmpi(r_X, 0);
+				if (pc_ret0 > 0) {
+					t_offset = addrs[pc_ret0 - 1];
+#ifdef CONFIG_SPARC32
+					emit_branch(BE, t_offset + 20);
+#else
+					emit_branch(BE, t_offset + 8);
+#endif
+					emit_nop(); /* delay slot */
+				} else {
+					emit_branch_off(BNE, 16);
+					emit_nop();
+#ifdef CONFIG_SPARC32
+					emit_jump(cleanup_addr + 20);
+#else
+					emit_jump(cleanup_addr + 8);
+#endif
+					emit_clear(r_A);
+				}
+				emit_write_y(G0);
+#ifdef CONFIG_SPARC32
+				/* The Sparc v8 architecture requires
+				 * three instructions between a %y
+				 * register write and the first use.
+				 */
+				emit_nop();
+				emit_nop();
+				emit_nop();
+#endif
+				emit_alu_X(DIV);
+				break;
+			case BPF_S_ALU_NEG:
+				emit_neg();
+				break;
+			case BPF_S_RET_K:
+				if (!K) {
+					if (pc_ret0 == -1)
+						pc_ret0 = i;
+					emit_clear(r_A);
+				} else {
+					emit_loadimm(K, r_A);
+				}
+				/* Fallthrough */
+			case BPF_S_RET_A:
+				if (seen_or_pass0) {
+					if (i != flen - 1) {
+						emit_jump(cleanup_addr);
+						emit_nop();
+						break;
+					}
+					if (seen_or_pass0 & SEEN_MEM) {
+						unsigned int sz = BASE_STACKFRAME;
+						sz += BPF_MEMWORDS * sizeof(u32);
+						emit_release_stack(sz);
+					}
+				}
+				/* jmpl %r_saved_O7 + 8, %g0 */
+				emit_jmpl(r_saved_O7, 8, G0);
+				emit_reg_move(r_A, O0); /* delay slot */
+				break;
+			case BPF_S_MISC_TAX:
+				seen |= SEEN_XREG;
+				emit_reg_move(r_A, r_X);
+				break;
+			case BPF_S_MISC_TXA:
+				seen |= SEEN_XREG;
+				emit_reg_move(r_X, r_A);
+				break;
+			case BPF_S_ANC_CPU:
+				emit_load_cpu(r_A);
+				break;
+			case BPF_S_ANC_PROTOCOL:
+				emit_skb_load16(protocol, r_A);
+				break;
+#if 0
+				/* GCC won't let us take the address of
+				 * a bit field even though we very much
+				 * know what we are doing here.
+				 */
+			case BPF_S_ANC_PKTTYPE:
+				__emit_skb_load8(pkt_type, r_A);
+				emit_alu_K(SRL, 5);
+				break;
+#endif
+			case BPF_S_ANC_IFINDEX:
+				emit_skb_loadptr(dev, r_A);
+				emit_cmpi(r_A, 0);
+				emit_branch(BNE_PTR, cleanup_addr + 4);
+				emit_nop();
+				emit_load32(r_A, struct net_device, ifindex, r_A);
+				break;
+			case BPF_S_ANC_MARK:
+				emit_skb_load32(mark, r_A);
+				break;
+			case BPF_S_ANC_QUEUE:
+				emit_skb_load16(queue_mapping, r_A);
+				break;
+			case BPF_S_ANC_HATYPE:
+				emit_skb_loadptr(dev, r_A);
+				emit_cmpi(r_A, 0);
+				emit_branch(BNE_PTR, cleanup_addr + 4);
+				emit_nop();
+				emit_load16(r_A, struct net_device, type, r_A);
+				break;
+			case BPF_S_ANC_RXHASH:
+				emit_skb_load32(rxhash, r_A);
+				break;
+
+			case BPF_S_LD_IMM:
+				emit_loadimm(K, r_A);
+				break;
+			case BPF_S_LDX_IMM:
+				emit_loadimm(K, r_X);
+				break;
+			case BPF_S_LD_MEM:
+				emit_ldmem(K * 4, r_A);
+				break;
+			case BPF_S_LDX_MEM:
+				emit_ldmem(K * 4, r_X);
+				break;
+			case BPF_S_ST:
+				emit_stmem(K * 4, r_A);
+				break;
+			case BPF_S_STX:
+				emit_stmem(K * 4, r_X);
+				break;
+
+#define CHOOSE_LOAD_FUNC(K, func) \
+	((int)K < 0 ? ((int)K >= SKF_LL_OFF ? func##_negative_offset : func) : func##_positive_offset)
+
+			case BPF_S_LD_W_ABS:
+				func = CHOOSE_LOAD_FUNC(K, bpf_jit_load_word);
+common_load:			seen |= SEEN_DATAREF;
+				emit_loadimm(K, r_OFF);
+				emit_call(func);
+				break;
+			case BPF_S_LD_H_ABS:
+				func = CHOOSE_LOAD_FUNC(K, bpf_jit_load_half);
+				goto common_load;
+			case BPF_S_LD_B_ABS:
+				func = CHOOSE_LOAD_FUNC(K, bpf_jit_load_byte);
+				goto common_load;
+			case BPF_S_LDX_B_MSH:
+				func = CHOOSE_LOAD_FUNC(K, bpf_jit_load_byte_msh);
+				goto common_load;
+			case BPF_S_LD_W_IND:
+				func = bpf_jit_load_word;
+common_load_ind:		seen |= SEEN_DATAREF | SEEN_XREG;
+				if (K) {
+					if (is_simm13(K)) {
+						emit_addi(r_X, K, r_OFF);
+					} else {
+						emit_loadimm(K, r_TMP);
+						emit_add(r_X, r_TMP, r_OFF);
+					}
+				} else {
+					emit_reg_move(r_X, r_OFF);
+				}
+				emit_call(func);
+				break;
+			case BPF_S_LD_H_IND:
+				func = bpf_jit_load_half;
+				goto common_load_ind;
+			case BPF_S_LD_B_IND:
+				func = bpf_jit_load_byte;
+				goto common_load_ind;
+			case BPF_S_JMP_JA:
+				emit_jump(addrs[i + K]);
+				emit_nop();
+				break;
+
+#define COND_SEL(CODE, TOP, FOP)	\
+	case CODE:			\
+		t_op = TOP;		\
+		f_op = FOP;		\
+		goto cond_branch
+
+			COND_SEL(BPF_S_JMP_JGT_K, BGU, BLEU);
+			COND_SEL(BPF_S_JMP_JGE_K, BGEU, BLU);
+			COND_SEL(BPF_S_JMP_JEQ_K, BE, BNE);
+			COND_SEL(BPF_S_JMP_JSET_K, BNE, BE);
+			COND_SEL(BPF_S_JMP_JGT_X, BGU, BLEU);
+			COND_SEL(BPF_S_JMP_JGE_X, BGEU, BLU);
+			COND_SEL(BPF_S_JMP_JEQ_X, BE, BNE);
+			COND_SEL(BPF_S_JMP_JSET_X, BNE, BE);
+
+cond_branch:			f_offset = addrs[i + filter[i].jf];
+				t_offset = addrs[i + filter[i].jt];
+
+				/* same targets, can avoid doing the test :) */
+				if (filter[i].jt == filter[i].jf) {
+					emit_jump(t_offset);
+					emit_nop();
+					break;
+				}
+
+				switch (filter[i].code) {
+				case BPF_S_JMP_JGT_X:
+				case BPF_S_JMP_JGE_X:
+				case BPF_S_JMP_JEQ_X:
+					seen |= SEEN_XREG;
+					emit_cmp(r_A, r_X);
+					break;
+				case BPF_S_JMP_JSET_X:
+					seen |= SEEN_XREG;
+					emit_btst(r_A, r_X);
+					break;
+				case BPF_S_JMP_JEQ_K:
+				case BPF_S_JMP_JGT_K:
+				case BPF_S_JMP_JGE_K:
+					if (is_simm13(K)) {
+						emit_cmpi(r_A, K);
+					} else {
+						emit_loadimm(K, r_TMP);
+						emit_cmp(r_A, r_TMP);
+					}
+					break;
+				case BPF_S_JMP_JSET_K:
+					if (is_simm13(K)) {
+						emit_btsti(r_A, K);
+					} else {
+						emit_loadimm(K, r_TMP);
+						emit_btst(r_A, r_TMP);
+					}
+					break;
+				}
+				if (filter[i].jt != 0) {
+					if (filter[i].jf)
+						t_offset += 8;
+					emit_branch(t_op, t_offset);
+					emit_nop(); /* delay slot */
+					if (filter[i].jf) {
+						emit_jump(f_offset);
+						emit_nop();
+					}
+					break;
+				}
+				emit_branch(f_op, f_offset);
+				emit_nop(); /* delay slot */
+				break;
+
+			default:
+				/* hmm, too complex filter, give up with jit compiler */
+				goto out;
+			}
+			ilen = (void *) prog - (void *) temp;
+			if (image) {
+				if (unlikely(proglen + ilen > oldproglen)) {
+					pr_err("bpb_jit_compile fatal error\n");
+					kfree(addrs);
+					module_free(NULL, image);
+					return;
+				}
+				memcpy(image + proglen, temp, ilen);
+			}
+			proglen += ilen;
+			addrs[i] = proglen;
+			prog = temp;
+		}
+		/* last bpf instruction is always a RET :
+		 * use it to give the cleanup instruction(s) addr
+		 */
+		cleanup_addr = proglen - 8; /* jmpl; mov r_A,%o0; */
+		if (seen_or_pass0 & SEEN_MEM)
+			cleanup_addr -= 4; /* add %sp, X, %sp; */
+
+		if (image) {
+			if (proglen != oldproglen)
+				pr_err("bpb_jit_compile proglen=%u != oldproglen=%u\n",
+				       proglen, oldproglen);
+			break;
+		}
+		if (proglen == oldproglen) {
+			image = module_alloc(max_t(unsigned int,
+						   proglen,
+						   sizeof(struct work_struct)));
+			if (!image)
+				goto out;
+		}
+		oldproglen = proglen;
+	}
+
+	if (bpf_jit_enable > 1)
+		pr_err("flen=%d proglen=%u pass=%d image=%p\n",
+		       flen, proglen, pass, image);
+
+	if (image) {
+		if (bpf_jit_enable > 1)
+			print_hex_dump(KERN_ERR, "JIT code: ", DUMP_PREFIX_ADDRESS,
+				       16, 1, image, proglen, false);
+		bpf_flush_icache(image, image + proglen);
+		fp->bpf_func = (void *)image;
+	}
+out:
+	kfree(addrs);
+	return;
+}
+
+static void jit_free_defer(struct work_struct *arg)
+{
+	module_free(NULL, arg);
+}
+
+/* run from softirq, we must use a work_struct to call
+ * module_free() from process context
+ */
+void bpf_jit_free(struct sk_filter *fp)
+{
+	if (fp->bpf_func != sk_run_filter) {
+		struct work_struct *work = (struct work_struct *)fp->bpf_func;
+
+		INIT_WORK(work, jit_free_defer);
+		schedule_work(work);
+	}
+}