Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 630 insertions, 0 deletions

diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig
new file mode 100644
index 000000000000..fb1189641c74
--- /dev/null
+++ b/arch/sparc64/Kconfig
@@ -0,0 +1,630 @@
+# $Id: config.in,v 1.158 2002/01/24 22:14:44 davem Exp $
+# For a description of the syntax of this configuration file,
+# see the Configure script.
+#
+
+mainmenu "Linux/UltraSPARC Kernel Configuration"
+
+config 64BIT
+	def_bool y
+
+config MMU
+	bool
+	default y
+
+config TIME_INTERPOLATION
+	bool
+	default y
+
+choice
+	prompt "Kernel page size"
+	default SPARC64_PAGE_SIZE_8KB
+
+config SPARC64_PAGE_SIZE_8KB
+	bool "8KB"
+	help
+	  This lets you select the page size of the kernel.
+
+	  8KB and 64KB work quite well, since Sparc ELF sections
+	  provide for up to 64KB alignment.
+
+	  Therefore, 512KB and 4MB are for expert hackers only.
+
+	  If you don't know what to do, choose 8KB.
+
+config SPARC64_PAGE_SIZE_64KB
+	bool "64KB"
+
+config SPARC64_PAGE_SIZE_512KB
+	bool "512KB"
+
+config SPARC64_PAGE_SIZE_4MB
+	bool "4MB"
+
+endchoice
+
+source "init/Kconfig"
+
+config SYSVIPC_COMPAT
+	bool
+	depends on COMPAT && SYSVIPC
+	default y
+
+menu "General machine setup"
+
+config BBC_I2C
+	tristate "UltraSPARC-III bootbus i2c controller driver"
+	depends on PCI
+	help
+	  The BBC devices on the UltraSPARC III have two I2C controllers.  The
+	  first I2C controller connects mainly to configuration PROMs (NVRAM,
+	  CPU configuration, DIMM types, etc.).  The second I2C controller
+	  connects to environmental control devices such as fans and
+	  temperature sensors.  The second controller also connects to the
+	  smartcard reader, if present.  Say Y to enable support for these.
+
+config VT
+	bool "Virtual terminal" if EMBEDDED
+	select INPUT
+	default y
+	---help---
+	  If you say Y here, you will get support for terminal devices with
+	  display and keyboard devices. These are called "virtual" because you
+	  can run several virtual terminals (also called virtual consoles) on
+	  one physical terminal. This is rather useful, for example one
+	  virtual terminal can collect system messages and warnings, another
+	  one can be used for a text-mode user session, and a third could run
+	  an X session, all in parallel. Switching between virtual terminals
+	  is done with certain key combinations, usually Alt-<function key>.
+
+	  The setterm command ("man setterm") can be used to change the
+	  properties (such as colors or beeping) of a virtual terminal. The
+	  man page console_codes(4) ("man console_codes") contains the special
+	  character sequences that can be used to change those properties
+	  directly. The fonts used on virtual terminals can be changed with
+	  the setfont ("man setfont") command and the key bindings are defined
+	  with the loadkeys ("man loadkeys") command.
+
+	  You need at least one virtual terminal device in order to make use
+	  of your keyboard and monitor. Therefore, only people configuring an
+	  embedded system would want to say N here in order to save some
+	  memory; the only way to log into such a system is then via a serial
+	  or network connection.
+
+	  If unsure, say Y, or else you won't be able to do much with your new
+	  shiny Linux system :-)
+
+config VT_CONSOLE
+	bool "Support for console on virtual terminal" if EMBEDDED
+	depends on VT
+	default y
+	---help---
+	  The system console is the device which receives all kernel messages
+	  and warnings and which allows logins in single user mode. If you
+	  answer Y here, a virtual terminal (the device used to interact with
+	  a physical terminal) can be used as system console. This is the most
+	  common mode of operations, so you should say Y here unless you want
+	  the kernel messages be output only to a serial port (in which case
+	  you should say Y to "Console on serial port", below).
+
+	  If you do say Y here, by default the currently visible virtual
+	  terminal (/dev/tty0) will be used as system console. You can change
+	  that with a kernel command line option such as "console=tty3" which
+	  would use the third virtual terminal as system console. (Try "man
+	  bootparam" or see the documentation of your boot loader (lilo or
+	  loadlin) about how to pass options to the kernel at boot time.)
+
+	  If unsure, say Y.
+
+config HW_CONSOLE
+	bool
+	default y
+
+config SMP
+	bool "Symmetric multi-processing support"
+	---help---
+	  This enables support for systems with more than one CPU. If you have
+	  a system with only one CPU, say N. If you have a system with more than
+	  one CPU, say Y.
+
+	  If you say N here, the kernel will run on single and multiprocessor
+	  machines, but will use only one CPU of a multiprocessor machine. If
+	  you say Y here, the kernel will run on many, but not all,
+	  singleprocessor machines. On a singleprocessor machine, the kernel
+	  will run faster if you say N here.
+
+	  People using multiprocessor machines who say Y here should also say
+	  Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
+	  Management" code will be disabled if you say Y here.
+
+	  See also the <file:Documentation/smp.txt>,
+	  <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  If you don't know what to do here, say N.
+
+config PREEMPT
+	bool "Preemptible Kernel"
+	help
+	  This option reduces the latency of the kernel when reacting to
+	  real-time or interactive events by allowing a low priority process to
+	  be preempted even if it is in kernel mode executing a system call.
+	  This allows applications to run more reliably even when the system is
+	  under load.
+
+	  Say Y here if you are building a kernel for a desktop, embedded
+	  or real-time system.  Say N if you are unsure.
+
+config NR_CPUS
+	int "Maximum number of CPUs (2-64)"
+	range 2 64
+	depends on SMP
+	default "32"
+
+source "drivers/cpufreq/Kconfig"
+
+config US3_FREQ
+	tristate "UltraSPARC-III CPU Frequency driver"
+	depends on CPU_FREQ
+	select CPU_FREQ_TABLE
+	help
+	  This adds the CPUFreq driver for UltraSPARC-III processors.
+
+	  For details, take a look at <file:Documentation/cpu-freq>.
+
+	  If in doubt, say N.
+
+config US2E_FREQ
+	tristate "UltraSPARC-IIe CPU Frequency driver"
+	depends on CPU_FREQ
+	select CPU_FREQ_TABLE
+	help
+	  This adds the CPUFreq driver for UltraSPARC-IIe processors.
+
+	  For details, take a look at <file:Documentation/cpu-freq>.
+
+	  If in doubt, say N.
+
+# Identify this as a Sparc64 build
+config SPARC64
+	bool
+	default y
+	help
+	  SPARC is a family of RISC microprocessors designed and marketed by
+	  Sun Microsystems, incorporated.  This port covers the newer 64-bit
+	  UltraSPARC.  The UltraLinux project maintains both the SPARC32 and
+	  SPARC64 ports; its web page is available at
+	  <http://www.ultralinux.org/>.
+
+# Global things across all Sun machines.
+config RWSEM_GENERIC_SPINLOCK
+	bool
+
+config RWSEM_XCHGADD_ALGORITHM
+	bool
+	default y
+
+config GENERIC_CALIBRATE_DELAY
+	bool
+	default y
+
+choice
+	prompt "SPARC64 Huge TLB Page Size"
+	depends on HUGETLB_PAGE
+	default HUGETLB_PAGE_SIZE_4MB
+
+config HUGETLB_PAGE_SIZE_4MB
+	bool "4MB"
+
+config HUGETLB_PAGE_SIZE_512K
+	depends on !SPARC64_PAGE_SIZE_4MB
+	bool "512K"
+
+config HUGETLB_PAGE_SIZE_64K
+	depends on !SPARC64_PAGE_SIZE_4MB && !SPARC64_PAGE_SIZE_512K
+	bool "64K"
+
+endchoice
+
+config GENERIC_ISA_DMA
+	bool
+	default y
+
+config ISA
+	bool
+	help
+	  Find out whether you have ISA slots on your motherboard.  ISA is the
+	  name of a bus system, i.e. the way the CPU talks to the other stuff
+	  inside your box.  Other bus systems are PCI, EISA, MicroChannel
+	  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
+	  newer boards don't support it.  If you have ISA, say Y, otherwise N.
+
+config ISAPNP
+	bool
+	help
+	  Say Y here if you would like support for ISA Plug and Play devices.
+	  Some information is in <file:Documentation/isapnp.txt>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called isapnp.
+
+	  If unsure, say Y.
+
+config EISA
+	bool
+	---help---
+	  The Extended Industry Standard Architecture (EISA) bus was
+	  developed as an open alternative to the IBM MicroChannel bus.
+
+	  The EISA bus provided some of the features of the IBM MicroChannel
+	  bus while maintaining backward compatibility with cards made for
+	  the older ISA bus.  The EISA bus saw limited use between 1988 and
+	  1995 when it was made obsolete by the PCI bus.
+
+	  Say Y here if you are building a kernel for an EISA-based machine.
+
+	  Otherwise, say N.
+
+config MCA
+	bool
+	help
+	  MicroChannel Architecture is found in some IBM PS/2 machines and
+	  laptops.  It is a bus system similar to PCI or ISA. See
+	  <file:Documentation/mca.txt> (and especially the web page given
+	  there) before attempting to build an MCA bus kernel.
+
+config PCMCIA
+	tristate
+	---help---
+	  Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
+	  computer.  These are credit-card size devices such as network cards,
+	  modems or hard drives often used with laptops computers.  There are
+	  actually two varieties of these cards: the older 16 bit PCMCIA cards
+	  and the newer 32 bit CardBus cards.  If you want to use CardBus
+	  cards, you need to say Y here and also to "CardBus support" below.
+
+	  To use your PC-cards, you will need supporting software from David
+	  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
+	  for location).  Please also read the PCMCIA-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as modules, choose M here: the
+	  modules will be called pcmcia_core and ds.
+
+config SBUS
+	bool
+	default y
+
+config SBUSCHAR
+	bool
+	default y
+
+config SUN_AUXIO
+	bool
+	default y
+
+config SUN_IO
+	bool
+	default y
+
+config PCI
+	bool "PCI support"
+	help
+	  Find out whether you have a PCI motherboard. PCI is the name of a
+	  bus system, i.e. the way the CPU talks to the other stuff inside
+	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
+	  VESA. If you have PCI, say Y, otherwise N.
+
+	  The PCI-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>, contains valuable
+	  information about which PCI hardware does work under Linux and which
+	  doesn't.
+
+config PCI_DOMAINS
+	bool
+	default PCI
+
+config RTC
+	tristate
+	depends on PCI
+	default y
+	---help---
+	  If you say Y here and create a character special file /dev/rtc with
+	  major number 10 and minor number 135 using mknod ("man mknod"), you
+	  will get access to the real time clock (or hardware clock) built
+	  into your computer.
+
+	  Every PC has such a clock built in. It can be used to generate
+	  signals from as low as 1Hz up to 8192Hz, and can also be used
+	  as a 24 hour alarm. It reports status information via the file
+	  /proc/driver/rtc and its behaviour is set by various ioctls on
+	  /dev/rtc.
+
+	  If you run Linux on a multiprocessor machine and said Y to
+	  "Symmetric Multi Processing" above, you should say Y here to read
+	  and set the RTC in an SMP compatible fashion.
+
+	  If you think you have a use for such a device (such as periodic data
+	  sampling), then say Y here, and read <file:Documentation/rtc.txt>
+	  for details.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rtc.
+
+source "drivers/pci/Kconfig"
+
+config SUN_OPENPROMFS
+	tristate "Openprom tree appears in /proc/openprom"
+	help
+	  If you say Y, the OpenPROM device tree will be available as a
+	  virtual file system, which you can mount to /proc/openprom by "mount
+	  -t openpromfs none /proc/openprom".
+
+	  To compile the /proc/openprom support as a module, choose M here: the
+	  module will be called openpromfs.  If unsure, choose M.
+
+config SPARC32_COMPAT
+	bool "Kernel support for Linux/Sparc 32bit binary compatibility"
+	help
+	  This allows you to run 32-bit binaries on your Ultra.
+	  Everybody wants this; say Y.
+
+config COMPAT
+	bool
+	depends on SPARC32_COMPAT
+	default y
+
+config UID16
+	bool
+	depends on SPARC32_COMPAT
+	default y
+
+config BINFMT_ELF32
+	tristate "Kernel support for 32-bit ELF binaries"
+	depends on SPARC32_COMPAT
+	help
+	  This allows you to run 32-bit Linux/ELF binaries on your Ultra.
+	  Everybody wants this; say Y.
+
+config BINFMT_AOUT32
+	bool "Kernel support for 32-bit (ie. SunOS) a.out binaries"
+	depends on SPARC32_COMPAT
+	help
+	  This allows you to run 32-bit a.out format binaries on your Ultra.
+	  If you want to run SunOS binaries (see SunOS binary emulation below)
+	  or other a.out binaries, say Y. If unsure, say N.
+
+source "fs/Kconfig.binfmt"
+
+config SUNOS_EMUL
+	bool "SunOS binary emulation"
+	depends on BINFMT_AOUT32
+	help
+	  This allows you to run most SunOS binaries.  If you want to do this,
+	  say Y here and place appropriate files in /usr/gnemul/sunos. See
+	  <http://www.ultralinux.org/faq.html> for more information.  If you
+	  want to run SunOS binaries on an Ultra you must also say Y to
+	  "Kernel support for 32-bit a.out binaries" above.
+
+config SOLARIS_EMUL
+	tristate "Solaris binary emulation (EXPERIMENTAL)"
+	depends on SPARC32_COMPAT && EXPERIMENTAL
+	help
+	  This is experimental code which will enable you to run (many)
+	  Solaris binaries on your SPARC Linux machine.
+
+	  To compile this code as a module, choose M here: the
+	  module will be called solaris.
+
+source "drivers/parport/Kconfig"
+
+config PRINTER
+	tristate "Parallel printer support"
+	depends on PARPORT
+	---help---
+	  If you intend to attach a printer to the parallel port of your Linux
+	  box (as opposed to using a serial printer; if the connector at the
+	  printer has 9 or 25 holes ["female"], then it's serial), say Y.
+	  Also read the Printing-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  It is possible to share one parallel port among several devices
+	  (e.g. printer and ZIP drive) and it is safe to compile the
+	  corresponding drivers into the kernel.
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/parport.txt>.  The module will be called lp.
+
+	  If you have several parallel ports, you can specify which ports to
+	  use with the "lp" kernel command line option.  (Try "man bootparam"
+	  or see the documentation of your boot loader (lilo or loadlin) about
+	  how to pass options to the kernel at boot time.)  The syntax of the
+	  "lp" command line option can be found in <file:drivers/char/lp.c>.
+
+	  If you have more than 8 printers, you need to increase the LP_NO
+	  macro in lp.c and the PARPORT_MAX macro in parport.h.
+
+config ENVCTRL
+	tristate "SUNW, envctrl support"
+	depends on PCI
+	help
+	  Kernel support for temperature and fan monitoring on Sun SME
+	  machines.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called envctrl.
+
+config DISPLAY7SEG
+	tristate "7-Segment Display support"
+	depends on PCI
+	---help---
+	  This is the driver for the 7-segment display and LED present on
+	  Sun Microsystems CompactPCI models CP1400 and CP1500.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called display7seg.
+
+	  If you do not have a CompactPCI model CP1400 or CP1500, or
+	  another UltraSPARC-IIi-cEngine boardset with a 7-segment display,
+	  you should say N to this option.
+
+config CMDLINE_BOOL
+	bool "Default bootloader kernel arguments"
+
+config CMDLINE
+	string "Initial kernel command string"
+	depends on CMDLINE_BOOL
+	default "console=ttyS0,9600 root=/dev/sda1"
+	help
+	  Say Y here if you want to be able to pass default arguments to
+	  the kernel. This will be overridden by the bootloader, if you
+	  use one (such as SILO). This is most useful if you want to boot
+	  a kernel from TFTP, and want default options to be available
+	  with having them passed on the command line.
+
+	  NOTE: This option WILL override the PROM bootargs setting!
+
+endmenu
+
+source "drivers/base/Kconfig"
+
+source "drivers/video/Kconfig"
+
+source "drivers/serial/Kconfig"
+
+source "drivers/sbus/char/Kconfig"
+
+source "drivers/mtd/Kconfig"
+
+source "drivers/block/Kconfig"
+
+source "drivers/ide/Kconfig"
+
+source "drivers/scsi/Kconfig"
+
+source "drivers/fc4/Kconfig"
+
+source "drivers/md/Kconfig"
+
+if PCI
+source "drivers/message/fusion/Kconfig"
+endif
+
+source "drivers/ieee1394/Kconfig"
+
+source "net/Kconfig"
+
+source "drivers/isdn/Kconfig"
+
+source "drivers/telephony/Kconfig"
+
+# This one must be before the filesystem configs. -DaveM
+
+menu "Unix98 PTY support"
+
+config UNIX98_PTYS
+	bool "Unix98 PTY support"
+	---help---
+	  A pseudo terminal (PTY) is a software device consisting of two
+	  halves: a master and a slave. The slave device behaves identical to
+	  a physical terminal; the master device is used by a process to
+	  read data from and write data to the slave, thereby emulating a
+	  terminal. Typical programs for the master side are telnet servers
+	  and xterms.
+
+	  Linux has traditionally used the BSD-like names /dev/ptyxx for
+	  masters and /dev/ttyxx for slaves of pseudo terminals. This scheme
+	  has a number of problems. The GNU C library glibc 2.1 and later,
+	  however, supports the Unix98 naming standard: in order to acquire a
+	  pseudo terminal, a process opens /dev/ptmx; the number of the pseudo
+	  terminal is then made available to the process and the pseudo
+	  terminal slave can be accessed as /dev/pts/<number>. What was
+	  traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
+
+	  The entries in /dev/pts/ are created on the fly by a virtual
+	  file system; therefore, if you say Y here you should say Y to
+	  "/dev/pts file system for Unix98 PTYs" as well.
+
+	  If you want to say Y here, you need to have the C library glibc 2.1
+	  or later (equal to libc-6.1, check with "ls -l /lib/libc.so.*").
+	  Read the instructions in <file:Documentation/Changes> pertaining to
+	  pseudo terminals. It's safe to say N.
+
+config UNIX98_PTY_COUNT
+	int "Maximum number of Unix98 PTYs in use (0-2048)"
+	depends on UNIX98_PTYS
+	default "256"
+	help
+	  The maximum number of Unix98 PTYs that can be used at any one time.
+	  The default is 256, and should be enough for desktop systems. Server
+	  machines which support incoming telnet/rlogin/ssh connections and/or
+	  serve several X terminals may want to increase this: every incoming
+	  connection and every xterm uses up one PTY.
+
+	  When not in use, each additional set of 256 PTYs occupy
+	  approximately 8 KB of kernel memory on 32-bit architectures.
+
+endmenu
+
+menu "XFree86 DRI support"
+
+config DRM
+	bool "Direct Rendering Manager (XFree86 DRI support)"
+	help
+	  Kernel-level support for the Direct Rendering Infrastructure (DRI)
+	  introduced in XFree86 4.0. If you say Y here, you need to select
+	  the module that's right for your graphics card from the list below.
+	  These modules provide support for synchronization, security, and
+	  DMA transfers. Please see <http://dri.sourceforge.net/> for more
+	  details.  You should also select and configure AGP
+	  (/dev/agpgart) support.
+
+config DRM_FFB
+	tristate "Creator/Creator3D"
+	depends on DRM && BROKEN
+	help
+	  Choose this option if you have one of Sun's Creator3D-based graphics
+	  and frame buffer cards.  Product page at
+	  <http://www.sun.com/desktop/products/Graphics/creator3d.html>.
+
+config DRM_TDFX
+	tristate "3dfx Banshee/Voodoo3+"
+	depends on DRM
+	help
+	  Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
+	  graphics card.  If M is selected, the module will be called tdfx.
+
+config DRM_R128
+	tristate "ATI Rage 128"
+	depends on DRM
+	help
+	  Choose this option if you have an ATI Rage 128 graphics card.  If M
+	  is selected, the module will be called r128.  AGP support for
+	  this card is strongly suggested (unless you have a PCI version).
+
+endmenu
+
+source "drivers/input/Kconfig"
+
+source "drivers/i2c/Kconfig"
+
+source "fs/Kconfig"
+
+source "drivers/media/Kconfig"
+
+source "sound/Kconfig"
+
+source "drivers/usb/Kconfig"
+
+source "drivers/infiniband/Kconfig"
+
+source "drivers/char/watchdog/Kconfig"
+
+source "arch/sparc64/oprofile/Kconfig"
+
+source "arch/sparc64/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"