diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2010-02-27 03:54:27 +0300 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2010-02-27 03:54:27 +0300 |
| commit | 64d497f55379b1e320a08ec2426468d96f5642ec (patch) | |
| tree | 22b9ab3c5e69c5cc2728cbc2ca7fc7623beef8f1 /arch/sh/boards/mach-highlander/irq-r7785rp.c | |
| parent | 37d4008484977f60d5d37499a2670c79b214dd46 (diff) | |
| parent | b5f5fe80fa98a60daa0fa94512d1599b1e26674c (diff) | |
| download | linux-64d497f55379b1e320a08ec2426468d96f5642ec.tar.xz | |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (187 commits)
sh: remove dead LED code for migo-r and ms7724se
sh: ecovec build fix for CONFIG_I2C=n
sh: ecovec r-standby support
sh: ms7724se r-standby support
sh: SH-Mobile R-standby register save/restore
clocksource: Fix up a registration/IRQ race in the sh drivers.
sh: ms7724: modify scan_timing for KEYSC
sh: ms7724: Add sh_sir support
sh: mach-ecovec24: Add sh_sir support
sh: wire up SET/GET_UNALIGN_CTL.
sh: allow alignment fault mode to be configured at kernel boot.
sh: sh7724: Update FSI/SPU2 clock
sh: always enable sh7724 vpu_clk and set to 166MHz on Ecovec
sh: add sh7724 kick callback to clk_div4_table
sh: introduce struct clk_div4_table
sh: clock-cpg div4 set_rate() shift fix
sh: Turn on speculative return for SH7785 and SH7786
sh: Merge legacy and dynamic PMB modes.
sh: Use uncached I/O helpers in PMB setup.
sh: Provide uncached I/O helpers.
...
Diffstat (limited to 'arch/sh/boards/mach-highlander/irq-r7785rp.c')
| -rw-r--r-- | arch/sh/boards/mach-highlander/irq-r7785rp.c | 16 |
1 files changed, 8 insertions, 8 deletions
diff --git a/arch/sh/boards/mach-highlander/irq-r7785rp.c b/arch/sh/boards/mach-highlander/irq-r7785rp.c index 3811b060a39b..558b24862776 100644 --- a/arch/sh/boards/mach-highlander/irq-r7785rp.c +++ b/arch/sh/boards/mach-highlander/irq-r7785rp.c @@ -66,20 +66,20 @@ static DECLARE_INTC_DESC(intc_desc, "r7785rp", vectors, unsigned char * __init highlander_plat_irq_setup(void) { - if ((ctrl_inw(0xa4000158) & 0xf000) != 0x1000) + if ((__raw_readw(0xa4000158) & 0xf000) != 0x1000) return NULL; printk(KERN_INFO "Using r7785rp interrupt controller.\n"); - ctrl_outw(0x0000, PA_IRLSSR1); /* FPGA IRLSSR1(CF_CD clear) */ + __raw_writew(0x0000, PA_IRLSSR1); /* FPGA IRLSSR1(CF_CD clear) */ /* Setup the FPGA IRL */ - ctrl_outw(0x0000, PA_IRLPRA); /* FPGA IRLA */ - ctrl_outw(0xe598, PA_IRLPRB); /* FPGA IRLB */ - ctrl_outw(0x7060, PA_IRLPRC); /* FPGA IRLC */ - ctrl_outw(0x0000, PA_IRLPRD); /* FPGA IRLD */ - ctrl_outw(0x4321, PA_IRLPRE); /* FPGA IRLE */ - ctrl_outw(0xdcba, PA_IRLPRF); /* FPGA IRLF */ + __raw_writew(0x0000, PA_IRLPRA); /* FPGA IRLA */ + __raw_writew(0xe598, PA_IRLPRB); /* FPGA IRLB */ + __raw_writew(0x7060, PA_IRLPRC); /* FPGA IRLC */ + __raw_writew(0x0000, PA_IRLPRD); /* FPGA IRLD */ + __raw_writew(0x4321, PA_IRLPRE); /* FPGA IRLE */ + __raw_writew(0xdcba, PA_IRLPRF); /* FPGA IRLF */ register_intc_controller(&intc_desc); return irl2irq; |