Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (365 commits)
  ALSA: hda - Disable sticky PCM stream assignment for AD codecs
  ALSA: usb - Creative USB X-Fi volume knob support
  ALSA: ca0106: Use card specific dac id for mute controls.
  ALSA: ca0106: Allow different sound cards to use different SPI channel mappings.
  ALSA: ca0106: Create a nice spot for mapping channels to dacs.
  ALSA: ca0106: Move enabling of front dac out of hardcoded setup sequence.
  ALSA: ca0106: Pull out dac powering routine into separate function.
  ALSA: ca0106 - add Sound Blaster 5.1vx info.
  ASoC: tlv320dac33: Use usleep_range for delays
  ALSA: usb-audio: add Novation Launchpad support
  ALSA: hda - Add workarounds for CT-IBG controllers
  ALSA: hda - Fix wrong TLV mute bit for STAC/IDT codecs
  ASoC: tpa6130a2: Error handling for broken chip
  ASoC: max98088: Staticise m98088_eq_band
  ASoC: soc-core: Fix codec->name memory leak
  ALSA: hda - Apply ideapad quirk to Acer laptops with Cxt5066
  ALSA: hda - Add some workarounds for Creative IBG
  ALSA: hda - Fix wrong SPDIF NID assignment for CA0110
  ALSA: hda - Fix codec rename rules for ALC662-compatible codecs
  ALSA: hda - Add alc_init_jacks() call to other codecs
  ...

5 files changed, 292 insertions, 37 deletions

diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
index 9535ce68caae..83c3218cb4da 100644
--- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
+++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
@@ -286,6 +286,7 @@
 
 		ssi@16100 {
 			compatible = "fsl,mpc8610-ssi";
+			status = "disabled";
 			cell-index = <1>;
 			reg = <0x16100 0x100>;
 			interrupt-parent = <&mpic>;
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index c3b113b2ca31..3aeb5949cfef 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -124,6 +124,9 @@ CONFIG_I2C_CPM=m
 CONFIG_I2C_MPC=y
 # CONFIG_HWMON is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+CONFIG_FB_FSL_DIU=y
+# CONFIG_VGA_CONSOLE is not set
 CONFIG_SOUND=y
 CONFIG_SND=y
 # CONFIG_SND_SUPPORT_OLD_API is not set
diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig
index a075da2ea3fb..d62c8016f4bc 100644
--- a/arch/powerpc/configs/mpc85xx_smp_defconfig
+++ b/arch/powerpc/configs/mpc85xx_smp_defconfig
@@ -126,6 +126,9 @@ CONFIG_I2C_CPM=m
 CONFIG_I2C_MPC=y
 # CONFIG_HWMON is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+CONFIG_FB_FSL_DIU=y
+# CONFIG_VGA_CONSOLE is not set
 CONFIG_SOUND=y
 CONFIG_SND=y
 # CONFIG_SND_SUPPORT_OLD_API is not set
diff --git a/arch/powerpc/include/asm/immap_86xx.h b/arch/powerpc/include/asm/fsl_guts.h
index 0f165e59c326..bebd12463ec9 100644
--- a/arch/powerpc/include/asm/immap_86xx.h
+++ b/arch/powerpc/include/asm/fsl_guts.h
@@ -1,5 +1,5 @@
 /**
- * MPC86xx Internal Memory Map
+ * Freecale 85xx and 86xx Global Utilties register set
  *
  * Authors: Jeff Brown
  *          Timur Tabi <timur@freescale.com>
@@ -10,73 +10,112 @@
  * under  the terms of  the GNU General  Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
- *
- * This header file defines structures for various 86xx SOC devices that are
- * used by multiple source files.
  */
 
-#ifndef __ASM_POWERPC_IMMAP_86XX_H__
-#define __ASM_POWERPC_IMMAP_86XX_H__
+#ifndef __ASM_POWERPC_FSL_GUTS_H__
+#define __ASM_POWERPC_FSL_GUTS_H__
 #ifdef __KERNEL__
 
-/* Global Utility Registers */
-struct ccsr_guts {
+/*
+ * These #ifdefs are safe because it's not possible to build a kernel that
+ * runs on e500 and e600 cores.
+ */
+
+#if !defined(CONFIG_PPC_85xx) && !defined(CONFIG_PPC_86xx)
+#error Only 85xx and 86xx SOCs are supported
+#endif
+
+/**
+ * Global Utility Registers.
+ *
+ * Not all registers defined in this structure are available on all chips, so
+ * you are expected to know whether a given register actually exists on your
+ * chip before you access it.
+ *
+ * Also, some registers are similar on different chips but have slightly
+ * different names.  In these cases, one name is chosen to avoid extraneous
+ * #ifdefs.
+ */
+#ifdef CONFIG_PPC_85xx
+struct ccsr_guts_85xx {
+#else
+struct ccsr_guts_86xx {
+#endif
 	__be32	porpllsr;	/* 0x.0000 - POR PLL Ratio Status Register */
 	__be32	porbmsr;	/* 0x.0004 - POR Boot Mode Status Register */
 	__be32	porimpscr;	/* 0x.0008 - POR I/O Impedance Status and Control Register */
 	__be32	pordevsr;	/* 0x.000c - POR I/O Device Status Register */
 	__be32	pordbgmsr;	/* 0x.0010 - POR Debug Mode Status Register */
-	u8	res1[0x20 - 0x14];
+	__be32	pordevsr2;	/* 0x.0014 - POR device status register 2 */
+	u8	res018[0x20 - 0x18];
 	__be32	porcir;		/* 0x.0020 - POR Configuration Information Register */
-	u8	res2[0x30 - 0x24];
+	u8	res024[0x30 - 0x24];
 	__be32	gpiocr;		/* 0x.0030 - GPIO Control Register */
-	u8	res3[0x40 - 0x34];
+	u8	res034[0x40 - 0x34];
 	__be32	gpoutdr;	/* 0x.0040 - General-Purpose Output Data Register */
-	u8	res4[0x50 - 0x44];
+	u8	res044[0x50 - 0x44];
 	__be32	gpindr;		/* 0x.0050 - General-Purpose Input Data Register */
-	u8	res5[0x60 - 0x54];
+	u8	res054[0x60 - 0x54];
 	__be32	pmuxcr;		/* 0x.0060 - Alternate Function Signal Multiplex Control */
-	u8	res6[0x70 - 0x64];
+        __be32  pmuxcr2;	/* 0x.0064 - Alternate function signal multiplex control 2 */
+        __be32  dmuxcr;		/* 0x.0068 - DMA Mux Control Register */
+        u8	res06c[0x70 - 0x6c];
 	__be32	devdisr;	/* 0x.0070 - Device Disable Control */
 	__be32	devdisr2;	/* 0x.0074 - Device Disable Control 2 */
-	u8	res7[0x80 - 0x78];
+	u8	res078[0x7c - 0x78];
+	__be32  pmjcr;		/* 0x.007c - 4 Power Management Jog Control Register */
 	__be32	powmgtcsr;	/* 0x.0080 - Power Management Status and Control Register */
-	u8	res8[0x90 - 0x84];
+	__be32  pmrccr;		/* 0x.0084 - Power Management Reset Counter Configuration Register */
+	__be32  pmpdccr;	/* 0x.0088 - Power Management Power Down Counter Configuration Register */
+	__be32  pmcdr;		/* 0x.008c - 4Power management clock disable register */
 	__be32	mcpsumr;	/* 0x.0090 - Machine Check Summary Register */
 	__be32	rstrscr;	/* 0x.0094 - Reset Request Status and Control Register */
-	u8	res9[0xA0 - 0x98];
+	__be32  ectrstcr;	/* 0x.0098 - Exception reset control register */
+	__be32  autorstsr;	/* 0x.009c - Automatic reset status register */
 	__be32	pvr;		/* 0x.00a0 - Processor Version Register */
 	__be32	svr;		/* 0x.00a4 - System Version Register */
-	u8	res10[0xB0 - 0xA8];
+	u8	res0a8[0xb0 - 0xa8];
 	__be32	rstcr;		/* 0x.00b0 - Reset Control Register */
-	u8	res11[0xC0 - 0xB4];
+	u8	res0b4[0xc0 - 0xb4];
+#ifdef CONFIG_PPC_85xx
+	__be32  iovselsr;	/* 0x.00c0 - I/O voltage select status register */
+#else
 	__be32	elbcvselcr;	/* 0x.00c0 - eLBC Voltage Select Ctrl Reg */
-	u8	res12[0x800 - 0xC4];
+#endif
+	u8	res0c4[0x224 - 0xc4];
+	__be32  iodelay1;	/* 0x.0224 - IO delay control register 1 */
+	__be32  iodelay2;	/* 0x.0228 - IO delay control register 2 */
+	u8	res22c[0x800 - 0x22c];
 	__be32	clkdvdr;	/* 0x.0800 - Clock Divide Register */
-	u8	res13[0x900 - 0x804];
+	u8	res804[0x900 - 0x804];
 	__be32	ircr;		/* 0x.0900 - Infrared Control Register */
-	u8	res14[0x908 - 0x904];
+	u8	res904[0x908 - 0x904];
 	__be32	dmacr;		/* 0x.0908 - DMA Control Register */
-	u8	res15[0x914 - 0x90C];
+	u8	res90c[0x914 - 0x90c];
 	__be32	elbccr;		/* 0x.0914 - eLBC Control Register */
-	u8	res16[0xB20 - 0x918];
+	u8	res918[0xb20 - 0x918];
 	__be32	ddr1clkdr;	/* 0x.0b20 - DDR1 Clock Disable Register */
 	__be32	ddr2clkdr;	/* 0x.0b24 - DDR2 Clock Disable Register */
 	__be32	ddrclkdr;	/* 0x.0b28 - DDR Clock Disable Register */
-	u8	res17[0xE00 - 0xB2C];
+	u8	resb2c[0xe00 - 0xb2c];
 	__be32	clkocr;		/* 0x.0e00 - Clock Out Select Register */
-	u8	res18[0xE10 - 0xE04];
+	u8	rese04[0xe10 - 0xe04];
 	__be32	ddrdllcr;	/* 0x.0e10 - DDR DLL Control Register */
-	u8	res19[0xE20 - 0xE14];
+	u8	rese14[0xe20 - 0xe14];
 	__be32	lbcdllcr;	/* 0x.0e20 - LBC DLL Control Register */
-	u8	res20[0xF04 - 0xE24];
+	__be32  cpfor;		/* 0x.0e24 - L2 charge pump fuse override register */
+	u8	rese28[0xf04 - 0xe28];
 	__be32	srds1cr0;	/* 0x.0f04 - SerDes1 Control Register 0 */
 	__be32	srds1cr1;	/* 0x.0f08 - SerDes1 Control Register 0 */
-	u8	res21[0xF40 - 0xF0C];
-	__be32	srds2cr0;	/* 0x.0f40 - SerDes1 Control Register 0 */
-	__be32	srds2cr1;	/* 0x.0f44 - SerDes1 Control Register 0 */
+	u8	resf0c[0xf2c - 0xf0c];
+	__be32  itcr;		/* 0x.0f2c - Internal transaction control register */
+	u8	resf30[0xf40 - 0xf30];
+	__be32	srds2cr0;	/* 0x.0f40 - SerDes2 Control Register 0 */
+	__be32	srds2cr1;	/* 0x.0f44 - SerDes2 Control Register 0 */
 } __attribute__ ((packed));
 
+#ifdef CONFIG_PPC_86xx
+
 #define CCSR_GUTS_DMACR_DEV_SSI	0	/* DMA controller/channel set to SSI */
 #define CCSR_GUTS_DMACR_DEV_IR	1	/* DMA controller/channel set to IR */
 
@@ -93,7 +132,7 @@ struct ccsr_guts {
  * ch: The channel on the DMA controller (0, 1, 2, or 3)
  * device: The device to set as the source (CCSR_GUTS_DMACR_DEV_xx)
  */
-static inline void guts_set_dmacr(struct ccsr_guts __iomem *guts,
+static inline void guts_set_dmacr(struct ccsr_guts_86xx __iomem *guts,
 	unsigned int co, unsigned int ch, unsigned int device)
 {
 	unsigned int shift = 16 + (8 * (1 - co) + 2 * (3 - ch));
@@ -129,7 +168,7 @@ static inline void guts_set_dmacr(struct ccsr_guts __iomem *guts,
  * ch: The channel on the DMA controller (0, 1, 2, or 3)
  * value: the new value for the bit (0 or 1)
  */
-static inline void guts_set_pmuxcr_dma(struct ccsr_guts __iomem *guts,
+static inline void guts_set_pmuxcr_dma(struct ccsr_guts_86xx __iomem *guts,
 	unsigned int co, unsigned int ch, unsigned int value)
 {
 	if ((ch == 0) || (ch == 3)) {
@@ -152,5 +191,7 @@ static inline void guts_set_pmuxcr_dma(struct ccsr_guts __iomem *guts,
 #define CCSR_GUTS_CLKDVDR_SSICLK_MASK	0x000000FF
 #define CCSR_GUTS_CLKDVDR_SSICLK(x) ((x) & CCSR_GUTS_CLKDVDR_SSICLK_MASK)
 
-#endif /* __ASM_POWERPC_IMMAP_86XX_H__ */
-#endif /* __KERNEL__ */
+#endif
+
+#endif
+#endif
diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c
index 2b390d19a1d1..7eb5c40c069f 100644
--- a/arch/powerpc/platforms/85xx/p1022_ds.c
+++ b/arch/powerpc/platforms/85xx/p1022_ds.c
@@ -8,7 +8,6 @@
  * Copyright 2010 Freescale Semiconductor, Inc.
  *
  * This file is taken from the Freescale P1022DS BSP, with modifications:
- * 1) No DIU support (pending rewrite of DIU code)
  * 2) No AMP support
  * 3) No PCI endpoint support
  *
@@ -20,12 +19,211 @@
 #include <linux/pci.h>
 #include <linux/of_platform.h>
 #include <linux/memblock.h>
-
+#include <asm/div64.h>
 #include <asm/mpic.h>
 #include <asm/swiotlb.h>
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
+#include <asm/fsl_guts.h>
+
+#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
+
+/*
+ * Board-specific initialization of the DIU.  This code should probably be
+ * executed when the DIU is opened, rather than in arch code, but the DIU
+ * driver does not have a mechanism for this (yet).
+ *
+ * This is especially problematic on the P1022DS because the local bus (eLBC)
+ * and the DIU video signals share the same pins, which means that enabling the
+ * DIU will disable access to NOR flash.
+ */
+
+/* DIU Pixel Clock bits of the CLKDVDR Global Utilities register */
+#define CLKDVDR_PXCKEN		0x80000000
+#define CLKDVDR_PXCKINV		0x10000000
+#define CLKDVDR_PXCKDLY		0x06000000
+#define CLKDVDR_PXCLK_MASK	0x00FF0000
+
+/* Some ngPIXIS register definitions */
+#define PX_BRDCFG1_DVIEN	0x80
+#define PX_BRDCFG1_DFPEN	0x40
+#define PX_BRDCFG1_BACKLIGHT	0x20
+#define PX_BRDCFG1_DDCEN	0x10
+
+/*
+ * DIU Area Descriptor
+ *
+ * Note that we need to byte-swap the value before it's written to the AD
+ * register.  So even though the registers don't look like they're in the same
+ * bit positions as they are on the MPC8610, the same value is written to the
+ * AD register on the MPC8610 and on the P1022.
+ */
+#define AD_BYTE_F		0x10000000
+#define AD_ALPHA_C_MASK		0x0E000000
+#define AD_ALPHA_C_SHIFT	25
+#define AD_BLUE_C_MASK		0x01800000
+#define AD_BLUE_C_SHIFT		23
+#define AD_GREEN_C_MASK		0x00600000
+#define AD_GREEN_C_SHIFT	21
+#define AD_RED_C_MASK		0x00180000
+#define AD_RED_C_SHIFT		19
+#define AD_PALETTE		0x00040000
+#define AD_PIXEL_S_MASK		0x00030000
+#define AD_PIXEL_S_SHIFT	16
+#define AD_COMP_3_MASK		0x0000F000
+#define AD_COMP_3_SHIFT		12
+#define AD_COMP_2_MASK		0x00000F00
+#define AD_COMP_2_SHIFT		8
+#define AD_COMP_1_MASK		0x000000F0
+#define AD_COMP_1_SHIFT		4
+#define AD_COMP_0_MASK		0x0000000F
+#define AD_COMP_0_SHIFT		0
+
+#define MAKE_AD(alpha, red, blue, green, size, c0, c1, c2, c3) \
+	cpu_to_le32(AD_BYTE_F | (alpha << AD_ALPHA_C_SHIFT) | \
+	(blue << AD_BLUE_C_SHIFT) | (green << AD_GREEN_C_SHIFT) | \
+	(red << AD_RED_C_SHIFT) | (c3 << AD_COMP_3_SHIFT) | \
+	(c2 << AD_COMP_2_SHIFT) | (c1 << AD_COMP_1_SHIFT) | \
+	(c0 << AD_COMP_0_SHIFT) | (size << AD_PIXEL_S_SHIFT))
+
+/**
+ * p1022ds_get_pixel_format: return the Area Descriptor for a given pixel depth
+ *
+ * The Area Descriptor is a 32-bit value that determine which bits in each
+ * pixel are to be used for each color.
+ */
+static unsigned int p1022ds_get_pixel_format(unsigned int bits_per_pixel,
+	int monitor_port)
+{
+	switch (bits_per_pixel) {
+	case 32:
+		/* 0x88883316 */
+		return MAKE_AD(3, 2, 0, 1, 3, 8, 8, 8, 8);
+	case 24:
+		/* 0x88082219 */
+		return MAKE_AD(4, 0, 1, 2, 2, 0, 8, 8, 8);
+	case 16:
+		/* 0x65053118 */
+		return MAKE_AD(4, 2, 1, 0, 1, 5, 6, 5, 0);
+	default:
+		pr_err("fsl-diu: unsupported pixel depth %u\n", bits_per_pixel);
+		return 0;
+	}
+}
+
+/**
+ * p1022ds_set_gamma_table: update the gamma table, if necessary
+ *
+ * On some boards, the gamma table for some ports may need to be modified.
+ * This is not the case on the P1022DS, so we do nothing.
+*/
+static void p1022ds_set_gamma_table(int monitor_port, char *gamma_table_base)
+{
+}
+
+/**
+ * p1022ds_set_monitor_port: switch the output to a different monitor port
+ *
+ */
+static void p1022ds_set_monitor_port(int monitor_port)
+{
+	struct device_node *pixis_node;
+	u8 __iomem *brdcfg1;
+
+	pixis_node = of_find_compatible_node(NULL, NULL, "fsl,p1022ds-pixis");
+	if (!pixis_node) {
+		pr_err("p1022ds: missing ngPIXIS node\n");
+		return;
+	}
+
+	brdcfg1 = of_iomap(pixis_node, 0);
+	if (!brdcfg1) {
+		pr_err("p1022ds: could not map ngPIXIS registers\n");
+		return;
+	}
+	brdcfg1 += 9;	/* BRDCFG1 is at offset 9 in the ngPIXIS */
+
+	switch (monitor_port) {
+	case 0: /* DVI */
+		/* Enable the DVI port, disable the DFP and the backlight */
+		clrsetbits_8(brdcfg1, PX_BRDCFG1_DFPEN | PX_BRDCFG1_BACKLIGHT,
+			     PX_BRDCFG1_DVIEN);
+		break;
+	case 1: /* Single link LVDS */
+		/* Enable the DFP port, disable the DVI and the backlight */
+		clrsetbits_8(brdcfg1, PX_BRDCFG1_DVIEN | PX_BRDCFG1_BACKLIGHT,
+			     PX_BRDCFG1_DFPEN);
+		break;
+	default:
+		pr_err("p1022ds: unsupported monitor port %i\n", monitor_port);
+	}
+}
+
+/**
+ * p1022ds_set_pixel_clock: program the DIU's clock
+ *
+ * @pixclock: the wavelength, in picoseconds, of the clock
+ */
+void p1022ds_set_pixel_clock(unsigned int pixclock)
+{
+	struct device_node *guts_np = NULL;
+	struct ccsr_guts_85xx __iomem *guts;
+	unsigned long freq;
+	u64 temp;
+	u32 pxclk;
+
+	/* Map the global utilities registers. */
+	guts_np = of_find_compatible_node(NULL, NULL, "fsl,p1022-guts");
+	if (!guts_np) {
+		pr_err("p1022ds: missing global utilties device node\n");
+		return;
+	}
+
+	guts = of_iomap(guts_np, 0);
+	of_node_put(guts_np);
+	if (!guts) {
+		pr_err("p1022ds: could not map global utilties device\n");
+		return;
+	}
+
+	/* Convert pixclock from a wavelength to a frequency */
+	temp = 1000000000000ULL;
+	do_div(temp, pixclock);
+	freq = temp;
+
+	/* pixclk is the ratio of the platform clock to the pixel clock */
+	pxclk = DIV_ROUND_CLOSEST(fsl_get_sys_freq(), freq);
+
+	/* Disable the pixel clock, and set it to non-inverted and no delay */
+	clrbits32(&guts->clkdvdr,
+		  CLKDVDR_PXCKEN | CLKDVDR_PXCKDLY | CLKDVDR_PXCLK_MASK);
+
+	/* Enable the clock and set the pxclk */
+	setbits32(&guts->clkdvdr, CLKDVDR_PXCKEN | (pxclk << 16));
+}
+
+/**
+ * p1022ds_show_monitor_port: show the current monitor
+ *
+ * This function returns a string indicating whether the current monitor is
+ * set to DVI or LVDS.
+ */
+ssize_t p1022ds_show_monitor_port(int monitor_port, char *buf)
+{
+	return sprintf(buf, "%c0 - DVI\n%c1 - Single link LVDS\n",
+		monitor_port == 0 ? '*' : ' ', monitor_port == 1 ? '*' : ' ');
+}
+
+/**
+ * p1022ds_set_sysfs_monitor_port: set the monitor port for sysfs
+ */
+int p1022ds_set_sysfs_monitor_port(int val)
+{
+	return val < 2 ? val : 0;
+}
+
+#endif
 
 void __init p1022_ds_pic_init(void)
 {
@@ -92,6 +290,15 @@ static void __init p1022_ds_setup_arch(void)
 	}
 #endif
 
+#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
+	diu_ops.get_pixel_format	= p1022ds_get_pixel_format;
+	diu_ops.set_gamma_table		= p1022ds_set_gamma_table;
+	diu_ops.set_monitor_port	= p1022ds_set_monitor_port;
+	diu_ops.set_pixel_clock		= p1022ds_set_pixel_clock;
+	diu_ops.show_monitor_port	= p1022ds_show_monitor_port;
+	diu_ops.set_sysfs_monitor_port	= p1022ds_set_sysfs_monitor_port;
+#endif
+
 #ifdef CONFIG_SMP
 	mpc85xx_smp_init();
 #endif