QE: Move QE from arch/powerpc to drivers/soc

ls1 has qe and ls1 has arm cpu.
move qe from arch/powerpc to drivers/soc/fsl
to adapt to powerpc and arm

Signed-off-by: Zhao Qiang <qiang.zhao@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>

12 files changed, 0 insertions, 3110 deletions

diff --git a/arch/powerpc/sysdev/qe_lib/Kconfig b/arch/powerpc/sysdev/qe_lib/Kconfig
deleted file mode 100644
index 3c251993bacd..000000000000
--- a/arch/powerpc/sysdev/qe_lib/Kconfig
+++ /dev/null
@@ -1,27 +0,0 @@
-#
-# QE Communication options
-#
-
-config UCC_SLOW
-	bool
-	default y if SERIAL_QE
-	help
-	  This option provides qe_lib support to UCC slow
-	  protocols: UART, BISYNC, QMC
-
-config UCC_FAST
-	bool
-	default y if UCC_GETH
-	help
-	  This option provides qe_lib support to UCC fast
-	  protocols: HDLC, Ethernet, ATM, transparent
-
-config UCC
-	bool
-	default y if UCC_FAST || UCC_SLOW
-
-config QE_USB
-	bool
-	default y if USB_FSL_QE
-	help
-	  QE USB Controller support
diff --git a/arch/powerpc/sysdev/qe_lib/Makefile b/arch/powerpc/sysdev/qe_lib/Makefile
deleted file mode 100644
index ffac5410c5c7..000000000000
--- a/arch/powerpc/sysdev/qe_lib/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# Makefile for the linux ppc-specific parts of QE
-#
-obj-$(CONFIG_QUICC_ENGINE)+= qe.o qe_common.o qe_ic.o qe_io.o
-obj-$(CONFIG_CPM)	+= qe_common.o
-obj-$(CONFIG_UCC)	+= ucc.o
-obj-$(CONFIG_UCC_SLOW)	+= ucc_slow.o
-obj-$(CONFIG_UCC_FAST)	+= ucc_fast.o
-obj-$(CONFIG_QE_USB)	+= usb.o
-obj-$(CONFIG_QE_GPIO)	+= gpio.o
diff --git a/arch/powerpc/sysdev/qe_lib/gpio.c b/arch/powerpc/sysdev/qe_lib/gpio.c
deleted file mode 100644
index 521e67a49dc4..000000000000
--- a/arch/powerpc/sysdev/qe_lib/gpio.c
+++ /dev/null
@@ -1,317 +0,0 @@
-/*
- * QUICC Engine GPIOs
- *
- * Copyright (c) MontaVista Software, Inc. 2008.
- *
- * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_gpio.h>
-#include <linux/gpio.h>
-#include <linux/slab.h>
-#include <linux/export.h>
-#include <asm/qe.h>
-
-struct qe_gpio_chip {
-	struct of_mm_gpio_chip mm_gc;
-	spinlock_t lock;
-
-	unsigned long pin_flags[QE_PIO_PINS];
-#define QE_PIN_REQUESTED 0
-
-	/* shadowed data register to clear/set bits safely */
-	u32 cpdata;
-
-	/* saved_regs used to restore dedicated functions */
-	struct qe_pio_regs saved_regs;
-};
-
-static inline struct qe_gpio_chip *
-to_qe_gpio_chip(struct of_mm_gpio_chip *mm_gc)
-{
-	return container_of(mm_gc, struct qe_gpio_chip, mm_gc);
-}
-
-static void qe_gpio_save_regs(struct of_mm_gpio_chip *mm_gc)
-{
-	struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
-	struct qe_pio_regs __iomem *regs = mm_gc->regs;
-
-	qe_gc->cpdata = in_be32(&regs->cpdata);
-	qe_gc->saved_regs.cpdata = qe_gc->cpdata;
-	qe_gc->saved_regs.cpdir1 = in_be32(&regs->cpdir1);
-	qe_gc->saved_regs.cpdir2 = in_be32(&regs->cpdir2);
-	qe_gc->saved_regs.cppar1 = in_be32(&regs->cppar1);
-	qe_gc->saved_regs.cppar2 = in_be32(&regs->cppar2);
-	qe_gc->saved_regs.cpodr = in_be32(&regs->cpodr);
-}
-
-static int qe_gpio_get(struct gpio_chip *gc, unsigned int gpio)
-{
-	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
-	struct qe_pio_regs __iomem *regs = mm_gc->regs;
-	u32 pin_mask = 1 << (QE_PIO_PINS - 1 - gpio);
-
-	return in_be32(&regs->cpdata) & pin_mask;
-}
-
-static void qe_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
-{
-	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
-	struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
-	struct qe_pio_regs __iomem *regs = mm_gc->regs;
-	unsigned long flags;
-	u32 pin_mask = 1 << (QE_PIO_PINS - 1 - gpio);
-
-	spin_lock_irqsave(&qe_gc->lock, flags);
-
-	if (val)
-		qe_gc->cpdata |= pin_mask;
-	else
-		qe_gc->cpdata &= ~pin_mask;
-
-	out_be32(&regs->cpdata, qe_gc->cpdata);
-
-	spin_unlock_irqrestore(&qe_gc->lock, flags);
-}
-
-static int qe_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
-{
-	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
-	struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
-	unsigned long flags;
-
-	spin_lock_irqsave(&qe_gc->lock, flags);
-
-	__par_io_config_pin(mm_gc->regs, gpio, QE_PIO_DIR_IN, 0, 0, 0);
-
-	spin_unlock_irqrestore(&qe_gc->lock, flags);
-
-	return 0;
-}
-
-static int qe_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
-{
-	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
-	struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
-	unsigned long flags;
-
-	qe_gpio_set(gc, gpio, val);
-
-	spin_lock_irqsave(&qe_gc->lock, flags);
-
-	__par_io_config_pin(mm_gc->regs, gpio, QE_PIO_DIR_OUT, 0, 0, 0);
-
-	spin_unlock_irqrestore(&qe_gc->lock, flags);
-
-	return 0;
-}
-
-struct qe_pin {
-	/*
-	 * The qe_gpio_chip name is unfortunate, we should change that to
-	 * something like qe_pio_controller. Someday.
-	 */
-	struct qe_gpio_chip *controller;
-	int num;
-};
-
-/**
- * qe_pin_request - Request a QE pin
- * @np:		device node to get a pin from
- * @index:	index of a pin in the device tree
- * Context:	non-atomic
- *
- * This function return qe_pin so that you could use it with the rest of
- * the QE Pin Multiplexing API.
- */
-struct qe_pin *qe_pin_request(struct device_node *np, int index)
-{
-	struct qe_pin *qe_pin;
-	struct gpio_chip *gc;
-	struct of_mm_gpio_chip *mm_gc;
-	struct qe_gpio_chip *qe_gc;
-	int err;
-	unsigned long flags;
-
-	qe_pin = kzalloc(sizeof(*qe_pin), GFP_KERNEL);
-	if (!qe_pin) {
-		pr_debug("%s: can't allocate memory\n", __func__);
-		return ERR_PTR(-ENOMEM);
-	}
-
-	err = of_get_gpio(np, index);
-	if (err < 0)
-		goto err0;
-	gc = gpio_to_chip(err);
-	if (WARN_ON(!gc))
-		goto err0;
-
-	if (!of_device_is_compatible(gc->of_node, "fsl,mpc8323-qe-pario-bank")) {
-		pr_debug("%s: tried to get a non-qe pin\n", __func__);
-		err = -EINVAL;
-		goto err0;
-	}
-
-	mm_gc = to_of_mm_gpio_chip(gc);
-	qe_gc = to_qe_gpio_chip(mm_gc);
-
-	spin_lock_irqsave(&qe_gc->lock, flags);
-
-	err -= gc->base;
-	if (test_and_set_bit(QE_PIN_REQUESTED, &qe_gc->pin_flags[err]) == 0) {
-		qe_pin->controller = qe_gc;
-		qe_pin->num = err;
-		err = 0;
-	} else {
-		err = -EBUSY;
-	}
-
-	spin_unlock_irqrestore(&qe_gc->lock, flags);
-
-	if (!err)
-		return qe_pin;
-err0:
-	kfree(qe_pin);
-	pr_debug("%s failed with status %d\n", __func__, err);
-	return ERR_PTR(err);
-}
-EXPORT_SYMBOL(qe_pin_request);
-
-/**
- * qe_pin_free - Free a pin
- * @qe_pin:	pointer to the qe_pin structure
- * Context:	any
- *
- * This function frees the qe_pin structure and makes a pin available
- * for further qe_pin_request() calls.
- */
-void qe_pin_free(struct qe_pin *qe_pin)
-{
-	struct qe_gpio_chip *qe_gc = qe_pin->controller;
-	unsigned long flags;
-	const int pin = qe_pin->num;
-
-	spin_lock_irqsave(&qe_gc->lock, flags);
-	test_and_clear_bit(QE_PIN_REQUESTED, &qe_gc->pin_flags[pin]);
-	spin_unlock_irqrestore(&qe_gc->lock, flags);
-
-	kfree(qe_pin);
-}
-EXPORT_SYMBOL(qe_pin_free);
-
-/**
- * qe_pin_set_dedicated - Revert a pin to a dedicated peripheral function mode
- * @qe_pin:	pointer to the qe_pin structure
- * Context:	any
- *
- * This function resets a pin to a dedicated peripheral function that
- * has been set up by the firmware.
- */
-void qe_pin_set_dedicated(struct qe_pin *qe_pin)
-{
-	struct qe_gpio_chip *qe_gc = qe_pin->controller;
-	struct qe_pio_regs __iomem *regs = qe_gc->mm_gc.regs;
-	struct qe_pio_regs *sregs = &qe_gc->saved_regs;
-	int pin = qe_pin->num;
-	u32 mask1 = 1 << (QE_PIO_PINS - (pin + 1));
-	u32 mask2 = 0x3 << (QE_PIO_PINS - (pin % (QE_PIO_PINS / 2) + 1) * 2);
-	bool second_reg = pin > (QE_PIO_PINS / 2) - 1;
-	unsigned long flags;
-
-	spin_lock_irqsave(&qe_gc->lock, flags);
-
-	if (second_reg) {
-		clrsetbits_be32(&regs->cpdir2, mask2, sregs->cpdir2 & mask2);
-		clrsetbits_be32(&regs->cppar2, mask2, sregs->cppar2 & mask2);
-	} else {
-		clrsetbits_be32(&regs->cpdir1, mask2, sregs->cpdir1 & mask2);
-		clrsetbits_be32(&regs->cppar1, mask2, sregs->cppar1 & mask2);
-	}
-
-	if (sregs->cpdata & mask1)
-		qe_gc->cpdata |= mask1;
-	else
-		qe_gc->cpdata &= ~mask1;
-
-	out_be32(&regs->cpdata, qe_gc->cpdata);
-	clrsetbits_be32(&regs->cpodr, mask1, sregs->cpodr & mask1);
-
-	spin_unlock_irqrestore(&qe_gc->lock, flags);
-}
-EXPORT_SYMBOL(qe_pin_set_dedicated);
-
-/**
- * qe_pin_set_gpio - Set a pin to the GPIO mode
- * @qe_pin:	pointer to the qe_pin structure
- * Context:	any
- *
- * This function sets a pin to the GPIO mode.
- */
-void qe_pin_set_gpio(struct qe_pin *qe_pin)
-{
-	struct qe_gpio_chip *qe_gc = qe_pin->controller;
-	struct qe_pio_regs __iomem *regs = qe_gc->mm_gc.regs;
-	unsigned long flags;
-
-	spin_lock_irqsave(&qe_gc->lock, flags);
-
-	/* Let's make it input by default, GPIO API is able to change that. */
-	__par_io_config_pin(regs, qe_pin->num, QE_PIO_DIR_IN, 0, 0, 0);
-
-	spin_unlock_irqrestore(&qe_gc->lock, flags);
-}
-EXPORT_SYMBOL(qe_pin_set_gpio);
-
-static int __init qe_add_gpiochips(void)
-{
-	struct device_node *np;
-
-	for_each_compatible_node(np, NULL, "fsl,mpc8323-qe-pario-bank") {
-		int ret;
-		struct qe_gpio_chip *qe_gc;
-		struct of_mm_gpio_chip *mm_gc;
-		struct gpio_chip *gc;
-
-		qe_gc = kzalloc(sizeof(*qe_gc), GFP_KERNEL);
-		if (!qe_gc) {
-			ret = -ENOMEM;
-			goto err;
-		}
-
-		spin_lock_init(&qe_gc->lock);
-
-		mm_gc = &qe_gc->mm_gc;
-		gc = &mm_gc->gc;
-
-		mm_gc->save_regs = qe_gpio_save_regs;
-		gc->ngpio = QE_PIO_PINS;
-		gc->direction_input = qe_gpio_dir_in;
-		gc->direction_output = qe_gpio_dir_out;
-		gc->get = qe_gpio_get;
-		gc->set = qe_gpio_set;
-
-		ret = of_mm_gpiochip_add(np, mm_gc);
-		if (ret)
-			goto err;
-		continue;
-err:
-		pr_err("%s: registration failed with status %d\n",
-		       np->full_name, ret);
-		kfree(qe_gc);
-		/* try others anyway */
-	}
-	return 0;
-}
-arch_initcall(qe_add_gpiochips);
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
deleted file mode 100644
index 88ae5c7ff4bb..000000000000
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ /dev/null
@@ -1,719 +0,0 @@
-/*
- * Copyright (C) 2006-2010 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Authors: 	Shlomi Gridish <gridish@freescale.com>
- * 		Li Yang <leoli@freescale.com>
- * Based on cpm2_common.c from Dan Malek (dmalek@jlc.net)
- *
- * Description:
- * General Purpose functions for the global management of the
- * QUICC Engine (QE).
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/spinlock.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/crc32.h>
-#include <linux/mod_devicetable.h>
-#include <linux/of_platform.h>
-#include <asm/irq.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/immap_qe.h>
-#include <asm/qe.h>
-#include <asm/prom.h>
-#include <asm/rheap.h>
-
-static void qe_snums_init(void);
-static int qe_sdma_init(void);
-
-static DEFINE_SPINLOCK(qe_lock);
-DEFINE_SPINLOCK(cmxgcr_lock);
-EXPORT_SYMBOL(cmxgcr_lock);
-
-/* QE snum state */
-enum qe_snum_state {
-	QE_SNUM_STATE_USED,
-	QE_SNUM_STATE_FREE
-};
-
-/* QE snum */
-struct qe_snum {
-	u8 num;
-	enum qe_snum_state state;
-};
-
-/* We allocate this here because it is used almost exclusively for
- * the communication processor devices.
- */
-struct qe_immap __iomem *qe_immr;
-EXPORT_SYMBOL(qe_immr);
-
-static struct qe_snum snums[QE_NUM_OF_SNUM];	/* Dynamically allocated SNUMs */
-static unsigned int qe_num_of_snum;
-
-static phys_addr_t qebase = -1;
-
-phys_addr_t get_qe_base(void)
-{
-	struct device_node *qe;
-	int size;
-	const u32 *prop;
-
-	if (qebase != -1)
-		return qebase;
-
-	qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
-	if (!qe) {
-		qe = of_find_node_by_type(NULL, "qe");
-		if (!qe)
-			return qebase;
-	}
-
-	prop = of_get_property(qe, "reg", &size);
-	if (prop && size >= sizeof(*prop))
-		qebase = of_translate_address(qe, prop);
-	of_node_put(qe);
-
-	return qebase;
-}
-
-EXPORT_SYMBOL(get_qe_base);
-
-void qe_reset(void)
-{
-	if (qe_immr == NULL)
-		qe_immr = ioremap(get_qe_base(), QE_IMMAP_SIZE);
-
-	qe_snums_init();
-
-	qe_issue_cmd(QE_RESET, QE_CR_SUBBLOCK_INVALID,
-		     QE_CR_PROTOCOL_UNSPECIFIED, 0);
-
-	/* Reclaim the MURAM memory for our use. */
-	qe_muram_init();
-
-	if (qe_sdma_init())
-		panic("sdma init failed!");
-}
-
-int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input)
-{
-	unsigned long flags;
-	u8 mcn_shift = 0, dev_shift = 0;
-	u32 ret;
-
-	spin_lock_irqsave(&qe_lock, flags);
-	if (cmd == QE_RESET) {
-		out_be32(&qe_immr->cp.cecr, (u32) (cmd | QE_CR_FLG));
-	} else {
-		if (cmd == QE_ASSIGN_PAGE) {
-			/* Here device is the SNUM, not sub-block */
-			dev_shift = QE_CR_SNUM_SHIFT;
-		} else if (cmd == QE_ASSIGN_RISC) {
-			/* Here device is the SNUM, and mcnProtocol is
-			 * e_QeCmdRiscAssignment value */
-			dev_shift = QE_CR_SNUM_SHIFT;
-			mcn_shift = QE_CR_MCN_RISC_ASSIGN_SHIFT;
-		} else {
-			if (device == QE_CR_SUBBLOCK_USB)
-				mcn_shift = QE_CR_MCN_USB_SHIFT;
-			else
-				mcn_shift = QE_CR_MCN_NORMAL_SHIFT;
-		}
-
-		out_be32(&qe_immr->cp.cecdr, cmd_input);
-		out_be32(&qe_immr->cp.cecr,
-			 (cmd | QE_CR_FLG | ((u32) device << dev_shift) | (u32)
-			  mcn_protocol << mcn_shift));
-	}
-
-	/* wait for the QE_CR_FLG to clear */
-	ret = spin_event_timeout((in_be32(&qe_immr->cp.cecr) & QE_CR_FLG) == 0,
-			   100, 0);
-	/* On timeout (e.g. failure), the expression will be false (ret == 0),
-	   otherwise it will be true (ret == 1). */
-	spin_unlock_irqrestore(&qe_lock, flags);
-
-	return ret == 1;
-}
-EXPORT_SYMBOL(qe_issue_cmd);
-
-/* Set a baud rate generator. This needs lots of work. There are
- * 16 BRGs, which can be connected to the QE channels or output
- * as clocks. The BRGs are in two different block of internal
- * memory mapped space.
- * The BRG clock is the QE clock divided by 2.
- * It was set up long ago during the initial boot phase and is
- * is given to us.
- * Baud rate clocks are zero-based in the driver code (as that maps
- * to port numbers). Documentation uses 1-based numbering.
- */
-static unsigned int brg_clk = 0;
-
-unsigned int qe_get_brg_clk(void)
-{
-	struct device_node *qe;
-	int size;
-	const u32 *prop;
-
-	if (brg_clk)
-		return brg_clk;
-
-	qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
-	if (!qe) {
-		qe = of_find_node_by_type(NULL, "qe");
-		if (!qe)
-			return brg_clk;
-	}
-
-	prop = of_get_property(qe, "brg-frequency", &size);
-	if (prop && size == sizeof(*prop))
-		brg_clk = *prop;
-
-	of_node_put(qe);
-
-	return brg_clk;
-}
-EXPORT_SYMBOL(qe_get_brg_clk);
-
-/* Program the BRG to the given sampling rate and multiplier
- *
- * @brg: the BRG, QE_BRG1 - QE_BRG16
- * @rate: the desired sampling rate
- * @multiplier: corresponds to the value programmed in GUMR_L[RDCR] or
- * GUMR_L[TDCR].  E.g., if this BRG is the RX clock, and GUMR_L[RDCR]=01,
- * then 'multiplier' should be 8.
- */
-int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier)
-{
-	u32 divisor, tempval;
-	u32 div16 = 0;
-
-	if ((brg < QE_BRG1) || (brg > QE_BRG16))
-		return -EINVAL;
-
-	divisor = qe_get_brg_clk() / (rate * multiplier);
-
-	if (divisor > QE_BRGC_DIVISOR_MAX + 1) {
-		div16 = QE_BRGC_DIV16;
-		divisor /= 16;
-	}
-
-	/* Errata QE_General4, which affects some MPC832x and MPC836x SOCs, says
-	   that the BRG divisor must be even if you're not using divide-by-16
-	   mode. */
-	if (!div16 && (divisor & 1) && (divisor > 3))
-		divisor++;
-
-	tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) |
-		QE_BRGC_ENABLE | div16;
-
-	out_be32(&qe_immr->brg.brgc[brg - QE_BRG1], tempval);
-
-	return 0;
-}
-EXPORT_SYMBOL(qe_setbrg);
-
-/* Convert a string to a QE clock source enum
- *
- * This function takes a string, typically from a property in the device
- * tree, and returns the corresponding "enum qe_clock" value.
-*/
-enum qe_clock qe_clock_source(const char *source)
-{
-	unsigned int i;
-
-	if (strcasecmp(source, "none") == 0)
-		return QE_CLK_NONE;
-
-	if (strncasecmp(source, "brg", 3) == 0) {
-		i = simple_strtoul(source + 3, NULL, 10);
-		if ((i >= 1) && (i <= 16))
-			return (QE_BRG1 - 1) + i;
-		else
-			return QE_CLK_DUMMY;
-	}
-
-	if (strncasecmp(source, "clk", 3) == 0) {
-		i = simple_strtoul(source + 3, NULL, 10);
-		if ((i >= 1) && (i <= 24))
-			return (QE_CLK1 - 1) + i;
-		else
-			return QE_CLK_DUMMY;
-	}
-
-	return QE_CLK_DUMMY;
-}
-EXPORT_SYMBOL(qe_clock_source);
-
-/* Initialize SNUMs (thread serial numbers) according to
- * QE Module Control chapter, SNUM table
- */
-static void qe_snums_init(void)
-{
-	int i;
-	static const u8 snum_init_76[] = {
-		0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D,
-		0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89,
-		0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9,
-		0xD8, 0xD9, 0xE8, 0xE9, 0x44, 0x45, 0x4C, 0x4D,
-		0x54, 0x55, 0x5C, 0x5D, 0x64, 0x65, 0x6C, 0x6D,
-		0x74, 0x75, 0x7C, 0x7D, 0x84, 0x85, 0x8C, 0x8D,
-		0x94, 0x95, 0x9C, 0x9D, 0xA4, 0xA5, 0xAC, 0xAD,
-		0xB4, 0xB5, 0xBC, 0xBD, 0xC4, 0xC5, 0xCC, 0xCD,
-		0xD4, 0xD5, 0xDC, 0xDD, 0xE4, 0xE5, 0xEC, 0xED,
-		0xF4, 0xF5, 0xFC, 0xFD,
-	};
-	static const u8 snum_init_46[] = {
-		0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D,
-		0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89,
-		0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9,
-		0xD8, 0xD9, 0xE8, 0xE9, 0x08, 0x09, 0x18, 0x19,
-		0x28, 0x29, 0x38, 0x39, 0x48, 0x49, 0x58, 0x59,
-		0x68, 0x69, 0x78, 0x79, 0x80, 0x81,
-	};
-	static const u8 *snum_init;
-
-	qe_num_of_snum = qe_get_num_of_snums();
-
-	if (qe_num_of_snum == 76)
-		snum_init = snum_init_76;
-	else
-		snum_init = snum_init_46;
-
-	for (i = 0; i < qe_num_of_snum; i++) {
-		snums[i].num = snum_init[i];
-		snums[i].state = QE_SNUM_STATE_FREE;
-	}
-}
-
-int qe_get_snum(void)
-{
-	unsigned long flags;
-	int snum = -EBUSY;
-	int i;
-
-	spin_lock_irqsave(&qe_lock, flags);
-	for (i = 0; i < qe_num_of_snum; i++) {
-		if (snums[i].state == QE_SNUM_STATE_FREE) {
-			snums[i].state = QE_SNUM_STATE_USED;
-			snum = snums[i].num;
-			break;
-		}
-	}
-	spin_unlock_irqrestore(&qe_lock, flags);
-
-	return snum;
-}
-EXPORT_SYMBOL(qe_get_snum);
-
-void qe_put_snum(u8 snum)
-{
-	int i;
-
-	for (i = 0; i < qe_num_of_snum; i++) {
-		if (snums[i].num == snum) {
-			snums[i].state = QE_SNUM_STATE_FREE;
-			break;
-		}
-	}
-}
-EXPORT_SYMBOL(qe_put_snum);
-
-static int qe_sdma_init(void)
-{
-	struct sdma __iomem *sdma = &qe_immr->sdma;
-	static unsigned long sdma_buf_offset = (unsigned long)-ENOMEM;
-
-	if (!sdma)
-		return -ENODEV;
-
-	/* allocate 2 internal temporary buffers (512 bytes size each) for
-	 * the SDMA */
-	if (IS_ERR_VALUE(sdma_buf_offset)) {
-		sdma_buf_offset = qe_muram_alloc(512 * 2, 4096);
-		if (IS_ERR_VALUE(sdma_buf_offset))
-			return -ENOMEM;
-	}
-
-	out_be32(&sdma->sdebcr, (u32) sdma_buf_offset & QE_SDEBCR_BA_MASK);
- 	out_be32(&sdma->sdmr, (QE_SDMR_GLB_1_MSK |
- 					(0x1 << QE_SDMR_CEN_SHIFT)));
-
-	return 0;
-}
-
-/* The maximum number of RISCs we support */
-#define MAX_QE_RISC     4
-
-/* Firmware information stored here for qe_get_firmware_info() */
-static struct qe_firmware_info qe_firmware_info;
-
-/*
- * Set to 1 if QE firmware has been uploaded, and therefore
- * qe_firmware_info contains valid data.
- */
-static int qe_firmware_uploaded;
-
-/*
- * Upload a QE microcode
- *
- * This function is a worker function for qe_upload_firmware().  It does
- * the actual uploading of the microcode.
- */
-static void qe_upload_microcode(const void *base,
-	const struct qe_microcode *ucode)
-{
-	const __be32 *code = base + be32_to_cpu(ucode->code_offset);
-	unsigned int i;
-
-	if (ucode->major || ucode->minor || ucode->revision)
-		printk(KERN_INFO "qe-firmware: "
-			"uploading microcode '%s' version %u.%u.%u\n",
-			ucode->id, ucode->major, ucode->minor, ucode->revision);
-	else
-		printk(KERN_INFO "qe-firmware: "
-			"uploading microcode '%s'\n", ucode->id);
-
-	/* Use auto-increment */
-	out_be32(&qe_immr->iram.iadd, be32_to_cpu(ucode->iram_offset) |
-		QE_IRAM_IADD_AIE | QE_IRAM_IADD_BADDR);
-
-	for (i = 0; i < be32_to_cpu(ucode->count); i++)
-		out_be32(&qe_immr->iram.idata, be32_to_cpu(code[i]));
-	
-	/* Set I-RAM Ready Register */
-	out_be32(&qe_immr->iram.iready, be32_to_cpu(QE_IRAM_READY));
-}
-
-/*
- * Upload a microcode to the I-RAM at a specific address.
- *
- * See Documentation/powerpc/qe_firmware.txt for information on QE microcode
- * uploading.
- *
- * Currently, only version 1 is supported, so the 'version' field must be
- * set to 1.
- *
- * The SOC model and revision are not validated, they are only displayed for
- * informational purposes.
- *
- * 'calc_size' is the calculated size, in bytes, of the firmware structure and
- * all of the microcode structures, minus the CRC.
- *
- * 'length' is the size that the structure says it is, including the CRC.
- */
-int qe_upload_firmware(const struct qe_firmware *firmware)
-{
-	unsigned int i;
-	unsigned int j;
-	u32 crc;
-	size_t calc_size = sizeof(struct qe_firmware);
-	size_t length;
-	const struct qe_header *hdr;
-
-	if (!firmware) {
-		printk(KERN_ERR "qe-firmware: invalid pointer\n");
-		return -EINVAL;
-	}
-
-	hdr = &firmware->header;
-	length = be32_to_cpu(hdr->length);
-
-	/* Check the magic */
-	if ((hdr->magic[0] != 'Q') || (hdr->magic[1] != 'E') ||
-	    (hdr->magic[2] != 'F')) {
-		printk(KERN_ERR "qe-firmware: not a microcode\n");
-		return -EPERM;
-	}
-
-	/* Check the version */
-	if (hdr->version != 1) {
-		printk(KERN_ERR "qe-firmware: unsupported version\n");
-		return -EPERM;
-	}
-
-	/* Validate some of the fields */
-	if ((firmware->count < 1) || (firmware->count > MAX_QE_RISC)) {
-		printk(KERN_ERR "qe-firmware: invalid data\n");
-		return -EINVAL;
-	}
-
-	/* Validate the length and check if there's a CRC */
-	calc_size += (firmware->count - 1) * sizeof(struct qe_microcode);
-
-	for (i = 0; i < firmware->count; i++)
-		/*
-		 * For situations where the second RISC uses the same microcode
-		 * as the first, the 'code_offset' and 'count' fields will be
-		 * zero, so it's okay to add those.
-		 */
-		calc_size += sizeof(__be32) *
-			be32_to_cpu(firmware->microcode[i].count);
-
-	/* Validate the length */
-	if (length != calc_size + sizeof(__be32)) {
-		printk(KERN_ERR "qe-firmware: invalid length\n");
-		return -EPERM;
-	}
-
-	/* Validate the CRC */
-	crc = be32_to_cpu(*(__be32 *)((void *)firmware + calc_size));
-	if (crc != crc32(0, firmware, calc_size)) {
-		printk(KERN_ERR "qe-firmware: firmware CRC is invalid\n");
-		return -EIO;
-	}
-
-	/*
-	 * If the microcode calls for it, split the I-RAM.
-	 */
-	if (!firmware->split)
-		setbits16(&qe_immr->cp.cercr, QE_CP_CERCR_CIR);
-
-	if (firmware->soc.model)
-		printk(KERN_INFO
-			"qe-firmware: firmware '%s' for %u V%u.%u\n",
-			firmware->id, be16_to_cpu(firmware->soc.model),
-			firmware->soc.major, firmware->soc.minor);
-	else
-		printk(KERN_INFO "qe-firmware: firmware '%s'\n",
-			firmware->id);
-
-	/*
-	 * The QE only supports one microcode per RISC, so clear out all the
-	 * saved microcode information and put in the new.
-	 */
-	memset(&qe_firmware_info, 0, sizeof(qe_firmware_info));
-	strlcpy(qe_firmware_info.id, firmware->id, sizeof(qe_firmware_info.id));
-	qe_firmware_info.extended_modes = firmware->extended_modes;
-	memcpy(qe_firmware_info.vtraps, firmware->vtraps,
-		sizeof(firmware->vtraps));
-
-	/* Loop through each microcode. */
-	for (i = 0; i < firmware->count; i++) {
-		const struct qe_microcode *ucode = &firmware->microcode[i];
-
-		/* Upload a microcode if it's present */
-		if (ucode->code_offset)
-			qe_upload_microcode(firmware, ucode);
-
-		/* Program the traps for this processor */
-		for (j = 0; j < 16; j++) {
-			u32 trap = be32_to_cpu(ucode->traps[j]);
-
-			if (trap)
-				out_be32(&qe_immr->rsp[i].tibcr[j], trap);
-		}
-
-		/* Enable traps */
-		out_be32(&qe_immr->rsp[i].eccr, be32_to_cpu(ucode->eccr));
-	}
-
-	qe_firmware_uploaded = 1;
-
-	return 0;
-}
-EXPORT_SYMBOL(qe_upload_firmware);
-
-/*
- * Get info on the currently-loaded firmware
- *
- * This function also checks the device tree to see if the boot loader has
- * uploaded a firmware already.
- */
-struct qe_firmware_info *qe_get_firmware_info(void)
-{
-	static int initialized;
-	struct property *prop;
-	struct device_node *qe;
-	struct device_node *fw = NULL;
-	const char *sprop;
-	unsigned int i;
-
-	/*
-	 * If we haven't checked yet, and a driver hasn't uploaded a firmware
-	 * yet, then check the device tree for information.
-	 */
-	if (qe_firmware_uploaded)
-		return &qe_firmware_info;
-
-	if (initialized)
-		return NULL;
-
-	initialized = 1;
-
-	/*
-	 * Newer device trees have an "fsl,qe" compatible property for the QE
-	 * node, but we still need to support older device trees.
-	*/
-	qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
-	if (!qe) {
-		qe = of_find_node_by_type(NULL, "qe");
-		if (!qe)
-			return NULL;
-	}
-
-	/* Find the 'firmware' child node */
-	for_each_child_of_node(qe, fw) {
-		if (strcmp(fw->name, "firmware") == 0)
-			break;
-	}
-
-	of_node_put(qe);
-
-	/* Did we find the 'firmware' node? */
-	if (!fw)
-		return NULL;
-
-	qe_firmware_uploaded = 1;
-
-	/* Copy the data into qe_firmware_info*/
-	sprop = of_get_property(fw, "id", NULL);
-	if (sprop)
-		strlcpy(qe_firmware_info.id, sprop,
-			sizeof(qe_firmware_info.id));
-
-	prop = of_find_property(fw, "extended-modes", NULL);
-	if (prop && (prop->length == sizeof(u64))) {
-		const u64 *iprop = prop->value;
-
-		qe_firmware_info.extended_modes = *iprop;
-	}
-
-	prop = of_find_property(fw, "virtual-traps", NULL);
-	if (prop && (prop->length == 32)) {
-		const u32 *iprop = prop->value;
-
-		for (i = 0; i < ARRAY_SIZE(qe_firmware_info.vtraps); i++)
-			qe_firmware_info.vtraps[i] = iprop[i];
-	}
-
-	of_node_put(fw);
-
-	return &qe_firmware_info;
-}
-EXPORT_SYMBOL(qe_get_firmware_info);
-
-unsigned int qe_get_num_of_risc(void)
-{
-	struct device_node *qe;
-	int size;
-	unsigned int num_of_risc = 0;
-	const u32 *prop;
-
-	qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
-	if (!qe) {
-		/* Older devices trees did not have an "fsl,qe"
-		 * compatible property, so we need to look for
-		 * the QE node by name.
-		 */
-		qe = of_find_node_by_type(NULL, "qe");
-		if (!qe)
-			return num_of_risc;
-	}
-
-	prop = of_get_property(qe, "fsl,qe-num-riscs", &size);
-	if (prop && size == sizeof(*prop))
-		num_of_risc = *prop;
-
-	of_node_put(qe);
-
-	return num_of_risc;
-}
-EXPORT_SYMBOL(qe_get_num_of_risc);
-
-unsigned int qe_get_num_of_snums(void)
-{
-	struct device_node *qe;
-	int size;
-	unsigned int num_of_snums;
-	const u32 *prop;
-
-	num_of_snums = 28; /* The default number of snum for threads is 28 */
-	qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
-	if (!qe) {
-		/* Older devices trees did not have an "fsl,qe"
-		 * compatible property, so we need to look for
-		 * the QE node by name.
-		 */
-		qe = of_find_node_by_type(NULL, "qe");
-		if (!qe)
-			return num_of_snums;
-	}
-
-	prop = of_get_property(qe, "fsl,qe-num-snums", &size);
-	if (prop && size == sizeof(*prop)) {
-		num_of_snums = *prop;
-		if ((num_of_snums < 28) || (num_of_snums > QE_NUM_OF_SNUM)) {
-			/* No QE ever has fewer than 28 SNUMs */
-			pr_err("QE: number of snum is invalid\n");
-			of_node_put(qe);
-			return -EINVAL;
-		}
-	}
-
-	of_node_put(qe);
-
-	return num_of_snums;
-}
-EXPORT_SYMBOL(qe_get_num_of_snums);
-
-static int __init qe_init(void)
-{
-	struct device_node *np;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,qe");
-	if (!np)
-		return -ENODEV;
-	qe_reset();
-	of_node_put(np);
-	return 0;
-}
-subsys_initcall(qe_init);
-
-#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC_85xx)
-static int qe_resume(struct platform_device *ofdev)
-{
-	if (!qe_alive_during_sleep())
-		qe_reset();
-	return 0;
-}
-
-static int qe_probe(struct platform_device *ofdev)
-{
-	return 0;
-}
-
-static const struct of_device_id qe_ids[] = {
-	{ .compatible = "fsl,qe", },
-	{ },
-};
-
-static struct platform_driver qe_driver = {
-	.driver = {
-		.name = "fsl-qe",
-		.of_match_table = qe_ids,
-	},
-	.probe = qe_probe,
-	.resume = qe_resume,
-};
-
-static int __init qe_drv_init(void)
-{
-	return platform_driver_register(&qe_driver);
-}
-device_initcall(qe_drv_init);
-#endif /* defined(CONFIG_SUSPEND) && defined(CONFIG_PPC_85xx) */
diff --git a/arch/powerpc/sysdev/qe_lib/qe_common.c b/arch/powerpc/sysdev/qe_lib/qe_common.c
deleted file mode 100644
index b90043f1503b..000000000000
--- a/arch/powerpc/sysdev/qe_lib/qe_common.c
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * Common CPM code
- *
- * Author: Scott Wood <scottwood@freescale.com>
- *
- * Copyright 2007-2008,2010 Freescale Semiconductor, Inc.
- *
- * Some parts derived from commproc.c/cpm2_common.c, which is:
- * Copyright (c) 1997 Dan error_act (dmalek@jlc.net)
- * Copyright (c) 1999-2001 Dan Malek <dan@embeddedalley.com>
- * Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com)
- * 2006 (c) MontaVista Software, Inc.
- * Vitaly Bordug <vbordug@ru.mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- */
-#include <linux/genalloc.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/of_device.h>
-#include <linux/spinlock.h>
-#include <linux/export.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <asm/qe.h>
-
-static struct gen_pool *muram_pool;
-static spinlock_t cpm_muram_lock;
-static u8 __iomem *muram_vbase;
-static phys_addr_t muram_pbase;
-
-struct muram_block {
-	struct list_head head;
-	unsigned long start;
-	int size;
-};
-
-static LIST_HEAD(muram_block_list);
-
-/* max address size we deal with */
-#define OF_MAX_ADDR_CELLS	4
-#define GENPOOL_OFFSET		(4096 * 8)
-
-int cpm_muram_init(void)
-{
-	struct device_node *np;
-	struct resource r;
-	u32 zero[OF_MAX_ADDR_CELLS] = {};
-	resource_size_t max = 0;
-	int i = 0;
-	int ret = 0;
-
-	if (muram_pbase)
-		return 0;
-
-	spin_lock_init(&cpm_muram_lock);
-	np = of_find_compatible_node(NULL, NULL, "fsl,cpm-muram-data");
-	if (!np) {
-		/* try legacy bindings */
-		np = of_find_node_by_name(NULL, "data-only");
-		if (!np) {
-			pr_err("Cannot find CPM muram data node");
-			ret = -ENODEV;
-			goto out_muram;
-		}
-	}
-
-	muram_pool = gen_pool_create(0, -1);
-	muram_pbase = of_translate_address(np, zero);
-	if (muram_pbase == (phys_addr_t)OF_BAD_ADDR) {
-		pr_err("Cannot translate zero through CPM muram node");
-		ret = -ENODEV;
-		goto out_pool;
-	}
-
-	while (of_address_to_resource(np, i++, &r) == 0) {
-		if (r.end > max)
-			max = r.end;
-		ret = gen_pool_add(muram_pool, r.start - muram_pbase +
-				   GENPOOL_OFFSET, resource_size(&r), -1);
-		if (ret) {
-			pr_err("QE: couldn't add muram to pool!\n");
-			goto out_pool;
-		}
-	}
-
-	muram_vbase = ioremap(muram_pbase, max - muram_pbase + 1);
-	if (!muram_vbase) {
-		pr_err("Cannot map QE muram");
-		ret = -ENOMEM;
-		goto out_pool;
-	}
-	goto out_muram;
-out_pool:
-	gen_pool_destroy(muram_pool);
-out_muram:
-	of_node_put(np);
-	return ret;
-}
-
-/*
- * cpm_muram_alloc - allocate the requested size worth of multi-user ram
- * @size: number of bytes to allocate
- * @align: requested alignment, in bytes
- *
- * This function returns an offset into the muram area.
- * Use cpm_dpram_addr() to get the virtual address of the area.
- * Use cpm_muram_free() to free the allocation.
- */
-unsigned long cpm_muram_alloc(unsigned long size, unsigned long align)
-{
-	unsigned long start;
-	unsigned long flags;
-	struct genpool_data_align muram_pool_data;
-
-	spin_lock_irqsave(&cpm_muram_lock, flags);
-	muram_pool_data.align = align;
-	start = cpm_muram_alloc_common(size, gen_pool_first_fit_align,
-				       &muram_pool_data);
-	spin_unlock_irqrestore(&cpm_muram_lock, flags);
-	return start;
-}
-EXPORT_SYMBOL(cpm_muram_alloc);
-
-/**
- * cpm_muram_free - free a chunk of multi-user ram
- * @offset: The beginning of the chunk as returned by cpm_muram_alloc().
- */
-int cpm_muram_free(unsigned long offset)
-{
-	unsigned long flags;
-	int size;
-	struct muram_block *tmp;
-
-	size = 0;
-	spin_lock_irqsave(&cpm_muram_lock, flags);
-	list_for_each_entry(tmp, &muram_block_list, head) {
-		if (tmp->start == offset) {
-			size = tmp->size;
-			list_del(&tmp->head);
-			kfree(tmp);
-			break;
-		}
-	}
-	gen_pool_free(muram_pool, offset + GENPOOL_OFFSET, size);
-	spin_unlock_irqrestore(&cpm_muram_lock, flags);
-	return size;
-}
-EXPORT_SYMBOL(cpm_muram_free);
-
-/*
- * cpm_muram_alloc_fixed - reserve a specific region of multi-user ram
- * @offset: offset of allocation start address
- * @size: number of bytes to allocate
- * This function returns an offset into the muram area
- * Use cpm_dpram_addr() to get the virtual address of the area.
- * Use cpm_muram_free() to free the allocation.
- */
-unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size)
-{
-	unsigned long start;
-	unsigned long flags;
-	struct genpool_data_fixed muram_pool_data_fixed;
-
-	spin_lock_irqsave(&cpm_muram_lock, flags);
-	muram_pool_data_fixed.offset = offset + GENPOOL_OFFSET;
-	start = cpm_muram_alloc_common(size, gen_pool_fixed_alloc,
-				       &muram_pool_data_fixed);
-	spin_unlock_irqrestore(&cpm_muram_lock, flags);
-	return start;
-}
-EXPORT_SYMBOL(cpm_muram_alloc_fixed);
-
-/*
- * cpm_muram_alloc_common - cpm_muram_alloc common code
- * @size: number of bytes to allocate
- * @algo: algorithm for alloc.
- * @data: data for genalloc's algorithm.
- *
- * This function returns an offset into the muram area.
- */
-unsigned long cpm_muram_alloc_common(unsigned long size, genpool_algo_t algo,
-				     void *data)
-{
-	struct muram_block *entry;
-	unsigned long start;
-
-	start = gen_pool_alloc_algo(muram_pool, size, algo, data);
-	if (!start)
-		goto out2;
-	start = start - GENPOOL_OFFSET;
-	memset_io(cpm_muram_addr(start), 0, size);
-	entry = kmalloc(sizeof(*entry), GFP_KERNEL);
-	if (!entry)
-		goto out1;
-	entry->start = start;
-	entry->size = size;
-	list_add(&entry->head, &muram_block_list);
-
-	return start;
-out1:
-	gen_pool_free(muram_pool, start, size);
-out2:
-	return (unsigned long)-ENOMEM;
-}
-
-/**
- * cpm_muram_addr - turn a muram offset into a virtual address
- * @offset: muram offset to convert
- */
-void __iomem *cpm_muram_addr(unsigned long offset)
-{
-	return muram_vbase + offset;
-}
-EXPORT_SYMBOL(cpm_muram_addr);
-
-unsigned long cpm_muram_offset(void __iomem *addr)
-{
-	return addr - (void __iomem *)muram_vbase;
-}
-EXPORT_SYMBOL(cpm_muram_offset);
-
-/**
- * cpm_muram_dma - turn a muram virtual address into a DMA address
- * @offset: virtual address from cpm_muram_addr() to convert
- */
-dma_addr_t cpm_muram_dma(void __iomem *addr)
-{
-	return muram_pbase + ((u8 __iomem *)addr - muram_vbase);
-}
-EXPORT_SYMBOL(cpm_muram_dma);
diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c
deleted file mode 100644
index ef36f16f9f6f..000000000000
--- a/arch/powerpc/sysdev/qe_lib/qe_ic.c
+++ /dev/null
@@ -1,502 +0,0 @@
-/*
- * arch/powerpc/sysdev/qe_lib/qe_ic.c
- *
- * Copyright (C) 2006 Freescale Semiconductor, Inc.  All rights reserved.
- *
- * Author: Li Yang <leoli@freescale.com>
- * Based on code from Shlomi Gridish <gridish@freescale.com>
- *
- * QUICC ENGINE Interrupt Controller
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/slab.h>
-#include <linux/stddef.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/device.h>
-#include <linux/spinlock.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/qe_ic.h>
-
-#include "qe_ic.h"
-
-static DEFINE_RAW_SPINLOCK(qe_ic_lock);
-
-static struct qe_ic_info qe_ic_info[] = {
-	[1] = {
-	       .mask = 0x00008000,
-	       .mask_reg = QEIC_CIMR,
-	       .pri_code = 0,
-	       .pri_reg = QEIC_CIPWCC,
-	       },
-	[2] = {
-	       .mask = 0x00004000,
-	       .mask_reg = QEIC_CIMR,
-	       .pri_code = 1,
-	       .pri_reg = QEIC_CIPWCC,
-	       },
-	[3] = {
-	       .mask = 0x00002000,
-	       .mask_reg = QEIC_CIMR,
-	       .pri_code = 2,
-	       .pri_reg = QEIC_CIPWCC,
-	       },
-	[10] = {
-		.mask = 0x00000040,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 1,
-		.pri_reg = QEIC_CIPZCC,
-		},
-	[11] = {
-		.mask = 0x00000020,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 2,
-		.pri_reg = QEIC_CIPZCC,
-		},
-	[12] = {
-		.mask = 0x00000010,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 3,
-		.pri_reg = QEIC_CIPZCC,
-		},
-	[13] = {
-		.mask = 0x00000008,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 4,
-		.pri_reg = QEIC_CIPZCC,
-		},
-	[14] = {
-		.mask = 0x00000004,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 5,
-		.pri_reg = QEIC_CIPZCC,
-		},
-	[15] = {
-		.mask = 0x00000002,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 6,
-		.pri_reg = QEIC_CIPZCC,
-		},
-	[20] = {
-		.mask = 0x10000000,
-		.mask_reg = QEIC_CRIMR,
-		.pri_code = 3,
-		.pri_reg = QEIC_CIPRTA,
-		},
-	[25] = {
-		.mask = 0x00800000,
-		.mask_reg = QEIC_CRIMR,
-		.pri_code = 0,
-		.pri_reg = QEIC_CIPRTB,
-		},
-	[26] = {
-		.mask = 0x00400000,
-		.mask_reg = QEIC_CRIMR,
-		.pri_code = 1,
-		.pri_reg = QEIC_CIPRTB,
-		},
-	[27] = {
-		.mask = 0x00200000,
-		.mask_reg = QEIC_CRIMR,
-		.pri_code = 2,
-		.pri_reg = QEIC_CIPRTB,
-		},
-	[28] = {
-		.mask = 0x00100000,
-		.mask_reg = QEIC_CRIMR,
-		.pri_code = 3,
-		.pri_reg = QEIC_CIPRTB,
-		},
-	[32] = {
-		.mask = 0x80000000,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 0,
-		.pri_reg = QEIC_CIPXCC,
-		},
-	[33] = {
-		.mask = 0x40000000,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 1,
-		.pri_reg = QEIC_CIPXCC,
-		},
-	[34] = {
-		.mask = 0x20000000,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 2,
-		.pri_reg = QEIC_CIPXCC,
-		},
-	[35] = {
-		.mask = 0x10000000,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 3,
-		.pri_reg = QEIC_CIPXCC,
-		},
-	[36] = {
-		.mask = 0x08000000,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 4,
-		.pri_reg = QEIC_CIPXCC,
-		},
-	[40] = {
-		.mask = 0x00800000,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 0,
-		.pri_reg = QEIC_CIPYCC,
-		},
-	[41] = {
-		.mask = 0x00400000,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 1,
-		.pri_reg = QEIC_CIPYCC,
-		},
-	[42] = {
-		.mask = 0x00200000,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 2,
-		.pri_reg = QEIC_CIPYCC,
-		},
-	[43] = {
-		.mask = 0x00100000,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 3,
-		.pri_reg = QEIC_CIPYCC,
-		},
-};
-
-static inline u32 qe_ic_read(volatile __be32  __iomem * base, unsigned int reg)
-{
-	return in_be32(base + (reg >> 2));
-}
-
-static inline void qe_ic_write(volatile __be32  __iomem * base, unsigned int reg,
-			       u32 value)
-{
-	out_be32(base + (reg >> 2), value);
-}
-
-static inline struct qe_ic *qe_ic_from_irq(unsigned int virq)
-{
-	return irq_get_chip_data(virq);
-}
-
-static inline struct qe_ic *qe_ic_from_irq_data(struct irq_data *d)
-{
-	return irq_data_get_irq_chip_data(d);
-}
-
-static void qe_ic_unmask_irq(struct irq_data *d)
-{
-	struct qe_ic *qe_ic = qe_ic_from_irq_data(d);
-	unsigned int src = irqd_to_hwirq(d);
-	unsigned long flags;
-	u32 temp;
-
-	raw_spin_lock_irqsave(&qe_ic_lock, flags);
-
-	temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
-	qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
-		    temp | qe_ic_info[src].mask);
-
-	raw_spin_unlock_irqrestore(&qe_ic_lock, flags);
-}
-
-static void qe_ic_mask_irq(struct irq_data *d)
-{
-	struct qe_ic *qe_ic = qe_ic_from_irq_data(d);
-	unsigned int src = irqd_to_hwirq(d);
-	unsigned long flags;
-	u32 temp;
-
-	raw_spin_lock_irqsave(&qe_ic_lock, flags);
-
-	temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
-	qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
-		    temp & ~qe_ic_info[src].mask);
-
-	/* Flush the above write before enabling interrupts; otherwise,
-	 * spurious interrupts will sometimes happen.  To be 100% sure
-	 * that the write has reached the device before interrupts are
-	 * enabled, the mask register would have to be read back; however,
-	 * this is not required for correctness, only to avoid wasting
-	 * time on a large number of spurious interrupts.  In testing,
-	 * a sync reduced the observed spurious interrupts to zero.
-	 */
-	mb();
-
-	raw_spin_unlock_irqrestore(&qe_ic_lock, flags);
-}
-
-static struct irq_chip qe_ic_irq_chip = {
-	.name = "QEIC",
-	.irq_unmask = qe_ic_unmask_irq,
-	.irq_mask = qe_ic_mask_irq,
-	.irq_mask_ack = qe_ic_mask_irq,
-};
-
-static int qe_ic_host_match(struct irq_domain *h, struct device_node *node,
-			    enum irq_domain_bus_token bus_token)
-{
-	/* Exact match, unless qe_ic node is NULL */
-	struct device_node *of_node = irq_domain_get_of_node(h);
-	return of_node == NULL || of_node == node;
-}
-
-static int qe_ic_host_map(struct irq_domain *h, unsigned int virq,
-			  irq_hw_number_t hw)
-{
-	struct qe_ic *qe_ic = h->host_data;
-	struct irq_chip *chip;
-
-	if (qe_ic_info[hw].mask == 0) {
-		printk(KERN_ERR "Can't map reserved IRQ\n");
-		return -EINVAL;
-	}
-	/* Default chip */
-	chip = &qe_ic->hc_irq;
-
-	irq_set_chip_data(virq, qe_ic);
-	irq_set_status_flags(virq, IRQ_LEVEL);
-
-	irq_set_chip_and_handler(virq, chip, handle_level_irq);
-
-	return 0;
-}
-
-static const struct irq_domain_ops qe_ic_host_ops = {
-	.match = qe_ic_host_match,
-	.map = qe_ic_host_map,
-	.xlate = irq_domain_xlate_onetwocell,
-};
-
-/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
-unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic)
-{
-	int irq;
-
-	BUG_ON(qe_ic == NULL);
-
-	/* get the interrupt source vector. */
-	irq = qe_ic_read(qe_ic->regs, QEIC_CIVEC) >> 26;
-
-	if (irq == 0)
-		return NO_IRQ;
-
-	return irq_linear_revmap(qe_ic->irqhost, irq);
-}
-
-/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
-unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic)
-{
-	int irq;
-
-	BUG_ON(qe_ic == NULL);
-
-	/* get the interrupt source vector. */
-	irq = qe_ic_read(qe_ic->regs, QEIC_CHIVEC) >> 26;
-
-	if (irq == 0)
-		return NO_IRQ;
-
-	return irq_linear_revmap(qe_ic->irqhost, irq);
-}
-
-void __init qe_ic_init(struct device_node *node, unsigned int flags,
-		       void (*low_handler)(struct irq_desc *desc),
-		       void (*high_handler)(struct irq_desc *desc))
-{
-	struct qe_ic *qe_ic;
-	struct resource res;
-	u32 temp = 0, ret, high_active = 0;
-
-	ret = of_address_to_resource(node, 0, &res);
-	if (ret)
-		return;
-
-	qe_ic = kzalloc(sizeof(*qe_ic), GFP_KERNEL);
-	if (qe_ic == NULL)
-		return;
-
-	qe_ic->irqhost = irq_domain_add_linear(node, NR_QE_IC_INTS,
-					       &qe_ic_host_ops, qe_ic);
-	if (qe_ic->irqhost == NULL) {
-		kfree(qe_ic);
-		return;
-	}
-
-	qe_ic->regs = ioremap(res.start, resource_size(&res));
-
-	qe_ic->hc_irq = qe_ic_irq_chip;
-
-	qe_ic->virq_high = irq_of_parse_and_map(node, 0);
-	qe_ic->virq_low = irq_of_parse_and_map(node, 1);
-
-	if (qe_ic->virq_low == NO_IRQ) {
-		printk(KERN_ERR "Failed to map QE_IC low IRQ\n");
-		kfree(qe_ic);
-		return;
-	}
-
-	/* default priority scheme is grouped. If spread mode is    */
-	/* required, configure cicr accordingly.                    */
-	if (flags & QE_IC_SPREADMODE_GRP_W)
-		temp |= CICR_GWCC;
-	if (flags & QE_IC_SPREADMODE_GRP_X)
-		temp |= CICR_GXCC;
-	if (flags & QE_IC_SPREADMODE_GRP_Y)
-		temp |= CICR_GYCC;
-	if (flags & QE_IC_SPREADMODE_GRP_Z)
-		temp |= CICR_GZCC;
-	if (flags & QE_IC_SPREADMODE_GRP_RISCA)
-		temp |= CICR_GRTA;
-	if (flags & QE_IC_SPREADMODE_GRP_RISCB)
-		temp |= CICR_GRTB;
-
-	/* choose destination signal for highest priority interrupt */
-	if (flags & QE_IC_HIGH_SIGNAL) {
-		temp |= (SIGNAL_HIGH << CICR_HPIT_SHIFT);
-		high_active = 1;
-	}
-
-	qe_ic_write(qe_ic->regs, QEIC_CICR, temp);
-
-	irq_set_handler_data(qe_ic->virq_low, qe_ic);
-	irq_set_chained_handler(qe_ic->virq_low, low_handler);
-
-	if (qe_ic->virq_high != NO_IRQ &&
-			qe_ic->virq_high != qe_ic->virq_low) {
-		irq_set_handler_data(qe_ic->virq_high, qe_ic);
-		irq_set_chained_handler(qe_ic->virq_high, high_handler);
-	}
-}
-
-void qe_ic_set_highest_priority(unsigned int virq, int high)
-{
-	struct qe_ic *qe_ic = qe_ic_from_irq(virq);
-	unsigned int src = virq_to_hw(virq);
-	u32 temp = 0;
-
-	temp = qe_ic_read(qe_ic->regs, QEIC_CICR);
-
-	temp &= ~CICR_HP_MASK;
-	temp |= src << CICR_HP_SHIFT;
-
-	temp &= ~CICR_HPIT_MASK;
-	temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << CICR_HPIT_SHIFT;
-
-	qe_ic_write(qe_ic->regs, QEIC_CICR, temp);
-}
-
-/* Set Priority level within its group, from 1 to 8 */
-int qe_ic_set_priority(unsigned int virq, unsigned int priority)
-{
-	struct qe_ic *qe_ic = qe_ic_from_irq(virq);
-	unsigned int src = virq_to_hw(virq);
-	u32 temp;
-
-	if (priority > 8 || priority == 0)
-		return -EINVAL;
-	if (src > 127)
-		return -EINVAL;
-	if (qe_ic_info[src].pri_reg == 0)
-		return -EINVAL;
-
-	temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].pri_reg);
-
-	if (priority < 4) {
-		temp &= ~(0x7 << (32 - priority * 3));
-		temp |= qe_ic_info[src].pri_code << (32 - priority * 3);
-	} else {
-		temp &= ~(0x7 << (24 - priority * 3));
-		temp |= qe_ic_info[src].pri_code << (24 - priority * 3);
-	}
-
-	qe_ic_write(qe_ic->regs, qe_ic_info[src].pri_reg, temp);
-
-	return 0;
-}
-
-/* Set a QE priority to use high irq, only priority 1~2 can use high irq */
-int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high)
-{
-	struct qe_ic *qe_ic = qe_ic_from_irq(virq);
-	unsigned int src = virq_to_hw(virq);
-	u32 temp, control_reg = QEIC_CICNR, shift = 0;
-
-	if (priority > 2 || priority == 0)
-		return -EINVAL;
-
-	switch (qe_ic_info[src].pri_reg) {
-	case QEIC_CIPZCC:
-		shift = CICNR_ZCC1T_SHIFT;
-		break;
-	case QEIC_CIPWCC:
-		shift = CICNR_WCC1T_SHIFT;
-		break;
-	case QEIC_CIPYCC:
-		shift = CICNR_YCC1T_SHIFT;
-		break;
-	case QEIC_CIPXCC:
-		shift = CICNR_XCC1T_SHIFT;
-		break;
-	case QEIC_CIPRTA:
-		shift = CRICR_RTA1T_SHIFT;
-		control_reg = QEIC_CRICR;
-		break;
-	case QEIC_CIPRTB:
-		shift = CRICR_RTB1T_SHIFT;
-		control_reg = QEIC_CRICR;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	shift += (2 - priority) * 2;
-	temp = qe_ic_read(qe_ic->regs, control_reg);
-	temp &= ~(SIGNAL_MASK << shift);
-	temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << shift;
-	qe_ic_write(qe_ic->regs, control_reg, temp);
-
-	return 0;
-}
-
-static struct bus_type qe_ic_subsys = {
-	.name = "qe_ic",
-	.dev_name = "qe_ic",
-};
-
-static struct device device_qe_ic = {
-	.id = 0,
-	.bus = &qe_ic_subsys,
-};
-
-static int __init init_qe_ic_sysfs(void)
-{
-	int rc;
-
-	printk(KERN_DEBUG "Registering qe_ic with sysfs...\n");
-
-	rc = subsys_system_register(&qe_ic_subsys, NULL);
-	if (rc) {
-		printk(KERN_ERR "Failed registering qe_ic sys class\n");
-		return -ENODEV;
-	}
-	rc = device_register(&device_qe_ic);
-	if (rc) {
-		printk(KERN_ERR "Failed registering qe_ic sys device\n");
-		return -ENODEV;
-	}
-	return 0;
-}
-
-subsys_initcall(init_qe_ic_sysfs);
diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.h b/arch/powerpc/sysdev/qe_lib/qe_ic.h
deleted file mode 100644
index efef7ab9b753..000000000000
--- a/arch/powerpc/sysdev/qe_lib/qe_ic.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * arch/powerpc/sysdev/qe_lib/qe_ic.h
- *
- * QUICC ENGINE Interrupt Controller Header
- *
- * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Author: Li Yang <leoli@freescale.com>
- * Based on code from Shlomi Gridish <gridish@freescale.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#ifndef _POWERPC_SYSDEV_QE_IC_H
-#define _POWERPC_SYSDEV_QE_IC_H
-
-#include <asm/qe_ic.h>
-
-#define NR_QE_IC_INTS		64
-
-/* QE IC registers offset */
-#define QEIC_CICR		0x00
-#define QEIC_CIVEC		0x04
-#define QEIC_CRIPNR		0x08
-#define QEIC_CIPNR		0x0c
-#define QEIC_CIPXCC		0x10
-#define QEIC_CIPYCC		0x14
-#define QEIC_CIPWCC		0x18
-#define QEIC_CIPZCC		0x1c
-#define QEIC_CIMR		0x20
-#define QEIC_CRIMR		0x24
-#define QEIC_CICNR		0x28
-#define QEIC_CIPRTA		0x30
-#define QEIC_CIPRTB		0x34
-#define QEIC_CRICR		0x3c
-#define QEIC_CHIVEC		0x60
-
-/* Interrupt priority registers */
-#define CIPCC_SHIFT_PRI0	29
-#define CIPCC_SHIFT_PRI1	26
-#define CIPCC_SHIFT_PRI2	23
-#define CIPCC_SHIFT_PRI3	20
-#define CIPCC_SHIFT_PRI4	13
-#define CIPCC_SHIFT_PRI5	10
-#define CIPCC_SHIFT_PRI6	7
-#define CIPCC_SHIFT_PRI7	4
-
-/* CICR priority modes */
-#define CICR_GWCC		0x00040000
-#define CICR_GXCC		0x00020000
-#define CICR_GYCC		0x00010000
-#define CICR_GZCC		0x00080000
-#define CICR_GRTA		0x00200000
-#define CICR_GRTB		0x00400000
-#define CICR_HPIT_SHIFT		8
-#define CICR_HPIT_MASK		0x00000300
-#define CICR_HP_SHIFT		24
-#define CICR_HP_MASK		0x3f000000
-
-/* CICNR */
-#define CICNR_WCC1T_SHIFT	20
-#define CICNR_ZCC1T_SHIFT	28
-#define CICNR_YCC1T_SHIFT	12
-#define CICNR_XCC1T_SHIFT	4
-
-/* CRICR */
-#define CRICR_RTA1T_SHIFT	20
-#define CRICR_RTB1T_SHIFT	28
-
-/* Signal indicator */
-#define SIGNAL_MASK		3
-#define SIGNAL_HIGH		2
-#define SIGNAL_LOW		0
-
-struct qe_ic {
-	/* Control registers offset */
-	volatile u32 __iomem *regs;
-
-	/* The remapper for this QEIC */
-	struct irq_domain *irqhost;
-
-	/* The "linux" controller struct */
-	struct irq_chip hc_irq;
-
-	/* VIRQ numbers of QE high/low irqs */
-	unsigned int virq_high;
-	unsigned int virq_low;
-};
-
-/*
- * QE interrupt controller internal structure
- */
-struct qe_ic_info {
-	u32	mask;	  /* location of this source at the QIMR register. */
-	u32	mask_reg; /* Mask register offset */
-	u8	pri_code; /* for grouped interrupts sources - the interrupt
-			     code as appears at the group priority register */
-	u32	pri_reg;  /* Group priority register offset */
-};
-
-#endif /* _POWERPC_SYSDEV_QE_IC_H */
diff --git a/arch/powerpc/sysdev/qe_lib/qe_io.c b/arch/powerpc/sysdev/qe_lib/qe_io.c
deleted file mode 100644
index 7ea0174f6d3d..000000000000
--- a/arch/powerpc/sysdev/qe_lib/qe_io.c
+++ /dev/null
@@ -1,192 +0,0 @@
-/*
- * arch/powerpc/sysdev/qe_lib/qe_io.c
- *
- * QE Parallel I/O ports configuration routines
- *
- * Copyright 2006 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Author: Li Yang <LeoLi@freescale.com>
- * Based on code from Shlomi Gridish <gridish@freescale.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/ioport.h>
-
-#include <asm/io.h>
-#include <asm/qe.h>
-#include <asm/prom.h>
-#include <sysdev/fsl_soc.h>
-
-#undef DEBUG
-
-static struct qe_pio_regs __iomem *par_io;
-static int num_par_io_ports = 0;
-
-int par_io_init(struct device_node *np)
-{
-	struct resource res;
-	int ret;
-	const u32 *num_ports;
-
-	/* Map Parallel I/O ports registers */
-	ret = of_address_to_resource(np, 0, &res);
-	if (ret)
-		return ret;
-	par_io = ioremap(res.start, resource_size(&res));
-
-	num_ports = of_get_property(np, "num-ports", NULL);
-	if (num_ports)
-		num_par_io_ports = *num_ports;
-
-	return 0;
-}
-
-void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin, int dir,
-			 int open_drain, int assignment, int has_irq)
-{
-	u32 pin_mask1bit;
-	u32 pin_mask2bits;
-	u32 new_mask2bits;
-	u32 tmp_val;
-
-	/* calculate pin location for single and 2 bits information */
-	pin_mask1bit = (u32) (1 << (QE_PIO_PINS - (pin + 1)));
-
-	/* Set open drain, if required */
-	tmp_val = in_be32(&par_io->cpodr);
-	if (open_drain)
-		out_be32(&par_io->cpodr, pin_mask1bit | tmp_val);
-	else
-		out_be32(&par_io->cpodr, ~pin_mask1bit & tmp_val);
-
-	/* define direction */
-	tmp_val = (pin > (QE_PIO_PINS / 2) - 1) ?
-		in_be32(&par_io->cpdir2) :
-		in_be32(&par_io->cpdir1);
-
-	/* get all bits mask for 2 bit per port */
-	pin_mask2bits = (u32) (0x3 << (QE_PIO_PINS -
-				(pin % (QE_PIO_PINS / 2) + 1) * 2));
-
-	/* Get the final mask we need for the right definition */
-	new_mask2bits = (u32) (dir << (QE_PIO_PINS -
-				(pin % (QE_PIO_PINS / 2) + 1) * 2));
-
-	/* clear and set 2 bits mask */
-	if (pin > (QE_PIO_PINS / 2) - 1) {
-		out_be32(&par_io->cpdir2,
-			 ~pin_mask2bits & tmp_val);
-		tmp_val &= ~pin_mask2bits;
-		out_be32(&par_io->cpdir2, new_mask2bits | tmp_val);
-	} else {
-		out_be32(&par_io->cpdir1,
-			 ~pin_mask2bits & tmp_val);
-		tmp_val &= ~pin_mask2bits;
-		out_be32(&par_io->cpdir1, new_mask2bits | tmp_val);
-	}
-	/* define pin assignment */
-	tmp_val = (pin > (QE_PIO_PINS / 2) - 1) ?
-		in_be32(&par_io->cppar2) :
-		in_be32(&par_io->cppar1);
-
-	new_mask2bits = (u32) (assignment << (QE_PIO_PINS -
-			(pin % (QE_PIO_PINS / 2) + 1) * 2));
-	/* clear and set 2 bits mask */
-	if (pin > (QE_PIO_PINS / 2) - 1) {
-		out_be32(&par_io->cppar2,
-			 ~pin_mask2bits & tmp_val);
-		tmp_val &= ~pin_mask2bits;
-		out_be32(&par_io->cppar2, new_mask2bits | tmp_val);
-	} else {
-		out_be32(&par_io->cppar1,
-			 ~pin_mask2bits & tmp_val);
-		tmp_val &= ~pin_mask2bits;
-		out_be32(&par_io->cppar1, new_mask2bits | tmp_val);
-	}
-}
-EXPORT_SYMBOL(__par_io_config_pin);
-
-int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
-		      int assignment, int has_irq)
-{
-	if (!par_io || port >= num_par_io_ports)
-		return -EINVAL;
-
-	__par_io_config_pin(&par_io[port], pin, dir, open_drain, assignment,
-			    has_irq);
-	return 0;
-}
-EXPORT_SYMBOL(par_io_config_pin);
-
-int par_io_data_set(u8 port, u8 pin, u8 val)
-{
-	u32 pin_mask, tmp_val;
-
-	if (port >= num_par_io_ports)
-		return -EINVAL;
-	if (pin >= QE_PIO_PINS)
-		return -EINVAL;
-	/* calculate pin location */
-	pin_mask = (u32) (1 << (QE_PIO_PINS - 1 - pin));
-
-	tmp_val = in_be32(&par_io[port].cpdata);
-
-	if (val == 0)		/* clear */
-		out_be32(&par_io[port].cpdata, ~pin_mask & tmp_val);
-	else			/* set */
-		out_be32(&par_io[port].cpdata, pin_mask | tmp_val);
-
-	return 0;
-}
-EXPORT_SYMBOL(par_io_data_set);
-
-int par_io_of_config(struct device_node *np)
-{
-	struct device_node *pio;
-	const phandle *ph;
-	int pio_map_len;
-	const unsigned int *pio_map;
-
-	if (par_io == NULL) {
-		printk(KERN_ERR "par_io not initialized\n");
-		return -1;
-	}
-
-	ph = of_get_property(np, "pio-handle", NULL);
-	if (ph == NULL) {
-		printk(KERN_ERR "pio-handle not available\n");
-		return -1;
-	}
-
-	pio = of_find_node_by_phandle(*ph);
-
-	pio_map = of_get_property(pio, "pio-map", &pio_map_len);
-	if (pio_map == NULL) {
-		printk(KERN_ERR "pio-map is not set!\n");
-		return -1;
-	}
-	pio_map_len /= sizeof(unsigned int);
-	if ((pio_map_len % 6) != 0) {
-		printk(KERN_ERR "pio-map format wrong!\n");
-		return -1;
-	}
-
-	while (pio_map_len > 0) {
-		par_io_config_pin((u8) pio_map[0], (u8) pio_map[1],
-				(int) pio_map[2], (int) pio_map[3],
-				(int) pio_map[4], (int) pio_map[5]);
-		pio_map += 6;
-		pio_map_len -= 6;
-	}
-	of_node_put(pio);
-	return 0;
-}
-EXPORT_SYMBOL(par_io_of_config);
diff --git a/arch/powerpc/sysdev/qe_lib/ucc.c b/arch/powerpc/sysdev/qe_lib/ucc.c
deleted file mode 100644
index 621575b7e84a..000000000000
--- a/arch/powerpc/sysdev/qe_lib/ucc.c
+++ /dev/null
@@ -1,212 +0,0 @@
-/*
- * arch/powerpc/sysdev/qe_lib/ucc.c
- *
- * QE UCC API Set - UCC specific routines implementations.
- *
- * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Authors: 	Shlomi Gridish <gridish@freescale.com>
- * 		Li Yang <leoli@freescale.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/stddef.h>
-#include <linux/spinlock.h>
-#include <linux/export.h>
-
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/immap_qe.h>
-#include <asm/qe.h>
-#include <asm/ucc.h>
-
-int ucc_set_qe_mux_mii_mng(unsigned int ucc_num)
-{
-	unsigned long flags;
-
-	if (ucc_num > UCC_MAX_NUM - 1)
-		return -EINVAL;
-
-	spin_lock_irqsave(&cmxgcr_lock, flags);
-	clrsetbits_be32(&qe_immr->qmx.cmxgcr, QE_CMXGCR_MII_ENET_MNG,
-		ucc_num << QE_CMXGCR_MII_ENET_MNG_SHIFT);
-	spin_unlock_irqrestore(&cmxgcr_lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(ucc_set_qe_mux_mii_mng);
-
-/* Configure the UCC to either Slow or Fast.
- *
- * A given UCC can be figured to support either "slow" devices (e.g. UART)
- * or "fast" devices (e.g. Ethernet).
- *
- * 'ucc_num' is the UCC number, from 0 - 7.
- *
- * This function also sets the UCC_GUEMR_SET_RESERVED3 bit because that bit
- * must always be set to 1.
- */
-int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed)
-{
-	u8 __iomem *guemr;
-
-	/* The GUEMR register is at the same location for both slow and fast
-	   devices, so we just use uccX.slow.guemr. */
-	switch (ucc_num) {
-	case 0: guemr = &qe_immr->ucc1.slow.guemr;
-		break;
-	case 1: guemr = &qe_immr->ucc2.slow.guemr;
-		break;
-	case 2: guemr = &qe_immr->ucc3.slow.guemr;
-		break;
-	case 3: guemr = &qe_immr->ucc4.slow.guemr;
-		break;
-	case 4: guemr = &qe_immr->ucc5.slow.guemr;
-		break;
-	case 5: guemr = &qe_immr->ucc6.slow.guemr;
-		break;
-	case 6: guemr = &qe_immr->ucc7.slow.guemr;
-		break;
-	case 7: guemr = &qe_immr->ucc8.slow.guemr;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	clrsetbits_8(guemr, UCC_GUEMR_MODE_MASK,
-		UCC_GUEMR_SET_RESERVED3 | speed);
-
-	return 0;
-}
-
-static void get_cmxucr_reg(unsigned int ucc_num, __be32 __iomem **cmxucr,
-	unsigned int *reg_num, unsigned int *shift)
-{
-	unsigned int cmx = ((ucc_num & 1) << 1) + (ucc_num > 3);
-
-	*reg_num = cmx + 1;
-	*cmxucr = &qe_immr->qmx.cmxucr[cmx];
-	*shift = 16 - 8 * (ucc_num & 2);
-}
-
-int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask)
-{
-	__be32 __iomem *cmxucr;
-	unsigned int reg_num;
-	unsigned int shift;
-
-	/* check if the UCC number is in range. */
-	if (ucc_num > UCC_MAX_NUM - 1)
-		return -EINVAL;
-
-	get_cmxucr_reg(ucc_num, &cmxucr, &reg_num, &shift);
-
-	if (set)
-		setbits32(cmxucr, mask << shift);
-	else
-		clrbits32(cmxucr, mask << shift);
-
-	return 0;
-}
-
-int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock,
-	enum comm_dir mode)
-{
-	__be32 __iomem *cmxucr;
-	unsigned int reg_num;
-	unsigned int shift;
-	u32 clock_bits = 0;
-
-	/* check if the UCC number is in range. */
-	if (ucc_num > UCC_MAX_NUM - 1)
-		return -EINVAL;
-
-	/* The communications direction must be RX or TX */
-	if (!((mode == COMM_DIR_RX) || (mode == COMM_DIR_TX)))
-		return -EINVAL;
-
-	get_cmxucr_reg(ucc_num, &cmxucr, &reg_num, &shift);
-
-	switch (reg_num) {
-	case 1:
-		switch (clock) {
-		case QE_BRG1:	clock_bits = 1; break;
-		case QE_BRG2:	clock_bits = 2; break;
-		case QE_BRG7:	clock_bits = 3; break;
-		case QE_BRG8:	clock_bits = 4; break;
-		case QE_CLK9:	clock_bits = 5; break;
-		case QE_CLK10:	clock_bits = 6; break;
-		case QE_CLK11:	clock_bits = 7; break;
-		case QE_CLK12:	clock_bits = 8; break;
-		case QE_CLK15:	clock_bits = 9; break;
-		case QE_CLK16:	clock_bits = 10; break;
-		default: break;
-		}
-		break;
-	case 2:
-		switch (clock) {
-		case QE_BRG5:	clock_bits = 1; break;
-		case QE_BRG6:	clock_bits = 2; break;
-		case QE_BRG7:	clock_bits = 3; break;
-		case QE_BRG8:	clock_bits = 4; break;
-		case QE_CLK13:	clock_bits = 5; break;
-		case QE_CLK14:	clock_bits = 6; break;
-		case QE_CLK19:	clock_bits = 7; break;
-		case QE_CLK20:	clock_bits = 8; break;
-		case QE_CLK15:	clock_bits = 9; break;
-		case QE_CLK16:	clock_bits = 10; break;
-		default: break;
-		}
-		break;
-	case 3:
-		switch (clock) {
-		case QE_BRG9:	clock_bits = 1; break;
-		case QE_BRG10:	clock_bits = 2; break;
-		case QE_BRG15:	clock_bits = 3; break;
-		case QE_BRG16:	clock_bits = 4; break;
-		case QE_CLK3:	clock_bits = 5; break;
-		case QE_CLK4:	clock_bits = 6; break;
-		case QE_CLK17:	clock_bits = 7; break;
-		case QE_CLK18:	clock_bits = 8; break;
-		case QE_CLK7:	clock_bits = 9; break;
-		case QE_CLK8:	clock_bits = 10; break;
-		case QE_CLK16:	clock_bits = 11; break;
-		default: break;
-		}
-		break;
-	case 4:
-		switch (clock) {
-		case QE_BRG13:	clock_bits = 1; break;
-		case QE_BRG14:	clock_bits = 2; break;
-		case QE_BRG15:	clock_bits = 3; break;
-		case QE_BRG16:	clock_bits = 4; break;
-		case QE_CLK5:	clock_bits = 5; break;
-		case QE_CLK6:	clock_bits = 6; break;
-		case QE_CLK21:	clock_bits = 7; break;
-		case QE_CLK22:	clock_bits = 8; break;
-		case QE_CLK7:	clock_bits = 9; break;
-		case QE_CLK8:	clock_bits = 10; break;
-		case QE_CLK16:	clock_bits = 11; break;
-		default: break;
-		}
-		break;
-	default: break;
-	}
-
-	/* Check for invalid combination of clock and UCC number */
-	if (!clock_bits)
-		return -ENOENT;
-
-	if (mode == COMM_DIR_RX)
-		shift += 4;
-
-	clrsetbits_be32(cmxucr, QE_CMXUCR_TX_CLK_SRC_MASK << shift,
-		clock_bits << shift);
-
-	return 0;
-}
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_fast.c b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
deleted file mode 100644
index 65aaf15032ae..000000000000
--- a/arch/powerpc/sysdev/qe_lib/ucc_fast.c
+++ /dev/null
@@ -1,363 +0,0 @@
-/*
- * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Authors: 	Shlomi Gridish <gridish@freescale.com>
- * 		Li Yang <leoli@freescale.com>
- *
- * Description:
- * QE UCC Fast API Set - UCC Fast specific routines implementations.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/stddef.h>
-#include <linux/interrupt.h>
-#include <linux/err.h>
-#include <linux/export.h>
-
-#include <asm/io.h>
-#include <asm/immap_qe.h>
-#include <asm/qe.h>
-
-#include <asm/ucc.h>
-#include <asm/ucc_fast.h>
-
-void ucc_fast_dump_regs(struct ucc_fast_private * uccf)
-{
-	printk(KERN_INFO "UCC%u Fast registers:\n", uccf->uf_info->ucc_num);
-	printk(KERN_INFO "Base address: 0x%p\n", uccf->uf_regs);
-
-	printk(KERN_INFO "gumr  : addr=0x%p, val=0x%08x\n",
-		  &uccf->uf_regs->gumr, in_be32(&uccf->uf_regs->gumr));
-	printk(KERN_INFO "upsmr : addr=0x%p, val=0x%08x\n",
-		  &uccf->uf_regs->upsmr, in_be32(&uccf->uf_regs->upsmr));
-	printk(KERN_INFO "utodr : addr=0x%p, val=0x%04x\n",
-		  &uccf->uf_regs->utodr, in_be16(&uccf->uf_regs->utodr));
-	printk(KERN_INFO "udsr  : addr=0x%p, val=0x%04x\n",
-		  &uccf->uf_regs->udsr, in_be16(&uccf->uf_regs->udsr));
-	printk(KERN_INFO "ucce  : addr=0x%p, val=0x%08x\n",
-		  &uccf->uf_regs->ucce, in_be32(&uccf->uf_regs->ucce));
-	printk(KERN_INFO "uccm  : addr=0x%p, val=0x%08x\n",
-		  &uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm));
-	printk(KERN_INFO "uccs  : addr=0x%p, val=0x%02x\n",
-		  &uccf->uf_regs->uccs, in_8(&uccf->uf_regs->uccs));
-	printk(KERN_INFO "urfb  : addr=0x%p, val=0x%08x\n",
-		  &uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb));
-	printk(KERN_INFO "urfs  : addr=0x%p, val=0x%04x\n",
-		  &uccf->uf_regs->urfs, in_be16(&uccf->uf_regs->urfs));
-	printk(KERN_INFO "urfet : addr=0x%p, val=0x%04x\n",
-		  &uccf->uf_regs->urfet, in_be16(&uccf->uf_regs->urfet));
-	printk(KERN_INFO "urfset: addr=0x%p, val=0x%04x\n",
-		  &uccf->uf_regs->urfset, in_be16(&uccf->uf_regs->urfset));
-	printk(KERN_INFO "utfb  : addr=0x%p, val=0x%08x\n",
-		  &uccf->uf_regs->utfb, in_be32(&uccf->uf_regs->utfb));
-	printk(KERN_INFO "utfs  : addr=0x%p, val=0x%04x\n",
-		  &uccf->uf_regs->utfs, in_be16(&uccf->uf_regs->utfs));
-	printk(KERN_INFO "utfet : addr=0x%p, val=0x%04x\n",
-		  &uccf->uf_regs->utfet, in_be16(&uccf->uf_regs->utfet));
-	printk(KERN_INFO "utftt : addr=0x%p, val=0x%04x\n",
-		  &uccf->uf_regs->utftt, in_be16(&uccf->uf_regs->utftt));
-	printk(KERN_INFO "utpt  : addr=0x%p, val=0x%04x\n",
-		  &uccf->uf_regs->utpt, in_be16(&uccf->uf_regs->utpt));
-	printk(KERN_INFO "urtry : addr=0x%p, val=0x%08x\n",
-		  &uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry));
-	printk(KERN_INFO "guemr : addr=0x%p, val=0x%02x\n",
-		  &uccf->uf_regs->guemr, in_8(&uccf->uf_regs->guemr));
-}
-EXPORT_SYMBOL(ucc_fast_dump_regs);
-
-u32 ucc_fast_get_qe_cr_subblock(int uccf_num)
-{
-	switch (uccf_num) {
-	case 0: return QE_CR_SUBBLOCK_UCCFAST1;
-	case 1: return QE_CR_SUBBLOCK_UCCFAST2;
-	case 2: return QE_CR_SUBBLOCK_UCCFAST3;
-	case 3: return QE_CR_SUBBLOCK_UCCFAST4;
-	case 4: return QE_CR_SUBBLOCK_UCCFAST5;
-	case 5: return QE_CR_SUBBLOCK_UCCFAST6;
-	case 6: return QE_CR_SUBBLOCK_UCCFAST7;
-	case 7: return QE_CR_SUBBLOCK_UCCFAST8;
-	default: return QE_CR_SUBBLOCK_INVALID;
-	}
-}
-EXPORT_SYMBOL(ucc_fast_get_qe_cr_subblock);
-
-void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf)
-{
-	out_be16(&uccf->uf_regs->utodr, UCC_FAST_TOD);
-}
-EXPORT_SYMBOL(ucc_fast_transmit_on_demand);
-
-void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode)
-{
-	struct ucc_fast __iomem *uf_regs;
-	u32 gumr;
-
-	uf_regs = uccf->uf_regs;
-
-	/* Enable reception and/or transmission on this UCC. */
-	gumr = in_be32(&uf_regs->gumr);
-	if (mode & COMM_DIR_TX) {
-		gumr |= UCC_FAST_GUMR_ENT;
-		uccf->enabled_tx = 1;
-	}
-	if (mode & COMM_DIR_RX) {
-		gumr |= UCC_FAST_GUMR_ENR;
-		uccf->enabled_rx = 1;
-	}
-	out_be32(&uf_regs->gumr, gumr);
-}
-EXPORT_SYMBOL(ucc_fast_enable);
-
-void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode)
-{
-	struct ucc_fast __iomem *uf_regs;
-	u32 gumr;
-
-	uf_regs = uccf->uf_regs;
-
-	/* Disable reception and/or transmission on this UCC. */
-	gumr = in_be32(&uf_regs->gumr);
-	if (mode & COMM_DIR_TX) {
-		gumr &= ~UCC_FAST_GUMR_ENT;
-		uccf->enabled_tx = 0;
-	}
-	if (mode & COMM_DIR_RX) {
-		gumr &= ~UCC_FAST_GUMR_ENR;
-		uccf->enabled_rx = 0;
-	}
-	out_be32(&uf_regs->gumr, gumr);
-}
-EXPORT_SYMBOL(ucc_fast_disable);
-
-int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret)
-{
-	struct ucc_fast_private *uccf;
-	struct ucc_fast __iomem *uf_regs;
-	u32 gumr;
-	int ret;
-
-	if (!uf_info)
-		return -EINVAL;
-
-	/* check if the UCC port number is in range. */
-	if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) {
-		printk(KERN_ERR "%s: illegal UCC number\n", __func__);
-		return -EINVAL;
-	}
-
-	/* Check that 'max_rx_buf_length' is properly aligned (4). */
-	if (uf_info->max_rx_buf_length & (UCC_FAST_MRBLR_ALIGNMENT - 1)) {
-		printk(KERN_ERR "%s: max_rx_buf_length not aligned\n",
-			__func__);
-		return -EINVAL;
-	}
-
-	/* Validate Virtual Fifo register values */
-	if (uf_info->urfs < UCC_FAST_URFS_MIN_VAL) {
-		printk(KERN_ERR "%s: urfs is too small\n", __func__);
-		return -EINVAL;
-	}
-
-	if (uf_info->urfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-		printk(KERN_ERR "%s: urfs is not aligned\n", __func__);
-		return -EINVAL;
-	}
-
-	if (uf_info->urfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-		printk(KERN_ERR "%s: urfet is not aligned.\n", __func__);
-		return -EINVAL;
-	}
-
-	if (uf_info->urfset & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-		printk(KERN_ERR "%s: urfset is not aligned\n", __func__);
-		return -EINVAL;
-	}
-
-	if (uf_info->utfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-		printk(KERN_ERR "%s: utfs is not aligned\n", __func__);
-		return -EINVAL;
-	}
-
-	if (uf_info->utfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-		printk(KERN_ERR "%s: utfet is not aligned\n", __func__);
-		return -EINVAL;
-	}
-
-	if (uf_info->utftt & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-		printk(KERN_ERR "%s: utftt is not aligned\n", __func__);
-		return -EINVAL;
-	}
-
-	uccf = kzalloc(sizeof(struct ucc_fast_private), GFP_KERNEL);
-	if (!uccf) {
-		printk(KERN_ERR "%s: Cannot allocate private data\n",
-			__func__);
-		return -ENOMEM;
-	}
-
-	/* Fill fast UCC structure */
-	uccf->uf_info = uf_info;
-	/* Set the PHY base address */
-	uccf->uf_regs = ioremap(uf_info->regs, sizeof(struct ucc_fast));
-	if (uccf->uf_regs == NULL) {
-		printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__);
-		kfree(uccf);
-		return -ENOMEM;
-	}
-
-	uccf->enabled_tx = 0;
-	uccf->enabled_rx = 0;
-	uccf->stopped_tx = 0;
-	uccf->stopped_rx = 0;
-	uf_regs = uccf->uf_regs;
-	uccf->p_ucce = &uf_regs->ucce;
-	uccf->p_uccm = &uf_regs->uccm;
-#ifdef CONFIG_UGETH_TX_ON_DEMAND
-	uccf->p_utodr = &uf_regs->utodr;
-#endif
-#ifdef STATISTICS
-	uccf->tx_frames = 0;
-	uccf->rx_frames = 0;
-	uccf->rx_discarded = 0;
-#endif				/* STATISTICS */
-
-	/* Set UCC to fast type */
-	ret = ucc_set_type(uf_info->ucc_num, UCC_SPEED_TYPE_FAST);
-	if (ret) {
-		printk(KERN_ERR "%s: cannot set UCC type\n", __func__);
-		ucc_fast_free(uccf);
-		return ret;
-	}
-
-	uccf->mrblr = uf_info->max_rx_buf_length;
-
-	/* Set GUMR */
-	/* For more details see the hardware spec. */
-	gumr = uf_info->ttx_trx;
-	if (uf_info->tci)
-		gumr |= UCC_FAST_GUMR_TCI;
-	if (uf_info->cdp)
-		gumr |= UCC_FAST_GUMR_CDP;
-	if (uf_info->ctsp)
-		gumr |= UCC_FAST_GUMR_CTSP;
-	if (uf_info->cds)
-		gumr |= UCC_FAST_GUMR_CDS;
-	if (uf_info->ctss)
-		gumr |= UCC_FAST_GUMR_CTSS;
-	if (uf_info->txsy)
-		gumr |= UCC_FAST_GUMR_TXSY;
-	if (uf_info->rsyn)
-		gumr |= UCC_FAST_GUMR_RSYN;
-	gumr |= uf_info->synl;
-	if (uf_info->rtsm)
-		gumr |= UCC_FAST_GUMR_RTSM;
-	gumr |= uf_info->renc;
-	if (uf_info->revd)
-		gumr |= UCC_FAST_GUMR_REVD;
-	gumr |= uf_info->tenc;
-	gumr |= uf_info->tcrc;
-	gumr |= uf_info->mode;
-	out_be32(&uf_regs->gumr, gumr);
-
-	/* Allocate memory for Tx Virtual Fifo */
-	uccf->ucc_fast_tx_virtual_fifo_base_offset =
-	    qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
-	if (IS_ERR_VALUE(uccf->ucc_fast_tx_virtual_fifo_base_offset)) {
-		printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO\n",
-			__func__);
-		uccf->ucc_fast_tx_virtual_fifo_base_offset = 0;
-		ucc_fast_free(uccf);
-		return -ENOMEM;
-	}
-
-	/* Allocate memory for Rx Virtual Fifo */
-	uccf->ucc_fast_rx_virtual_fifo_base_offset =
-		qe_muram_alloc(uf_info->urfs +
-			   UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR,
-			   UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
-	if (IS_ERR_VALUE(uccf->ucc_fast_rx_virtual_fifo_base_offset)) {
-		printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO\n",
-			__func__);
-		uccf->ucc_fast_rx_virtual_fifo_base_offset = 0;
-		ucc_fast_free(uccf);
-		return -ENOMEM;
-	}
-
-	/* Set Virtual Fifo registers */
-	out_be16(&uf_regs->urfs, uf_info->urfs);
-	out_be16(&uf_regs->urfet, uf_info->urfet);
-	out_be16(&uf_regs->urfset, uf_info->urfset);
-	out_be16(&uf_regs->utfs, uf_info->utfs);
-	out_be16(&uf_regs->utfet, uf_info->utfet);
-	out_be16(&uf_regs->utftt, uf_info->utftt);
-	/* utfb, urfb are offsets from MURAM base */
-	out_be32(&uf_regs->utfb, uccf->ucc_fast_tx_virtual_fifo_base_offset);
-	out_be32(&uf_regs->urfb, uccf->ucc_fast_rx_virtual_fifo_base_offset);
-
-	/* Mux clocking */
-	/* Grant Support */
-	ucc_set_qe_mux_grant(uf_info->ucc_num, uf_info->grant_support);
-	/* Breakpoint Support */
-	ucc_set_qe_mux_bkpt(uf_info->ucc_num, uf_info->brkpt_support);
-	/* Set Tsa or NMSI mode. */
-	ucc_set_qe_mux_tsa(uf_info->ucc_num, uf_info->tsa);
-	/* If NMSI (not Tsa), set Tx and Rx clock. */
-	if (!uf_info->tsa) {
-		/* Rx clock routing */
-		if ((uf_info->rx_clock != QE_CLK_NONE) &&
-		    ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->rx_clock,
-					COMM_DIR_RX)) {
-			printk(KERN_ERR "%s: illegal value for RX clock\n",
-			       __func__);
-			ucc_fast_free(uccf);
-			return -EINVAL;
-		}
-		/* Tx clock routing */
-		if ((uf_info->tx_clock != QE_CLK_NONE) &&
-		    ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->tx_clock,
-					COMM_DIR_TX)) {
-			printk(KERN_ERR "%s: illegal value for TX clock\n",
-			       __func__);
-			ucc_fast_free(uccf);
-			return -EINVAL;
-		}
-	}
-
-	/* Set interrupt mask register at UCC level. */
-	out_be32(&uf_regs->uccm, uf_info->uccm_mask);
-
-	/* First, clear anything pending at UCC level,
-	 * otherwise, old garbage may come through
-	 * as soon as the dam is opened. */
-
-	/* Writing '1' clears */
-	out_be32(&uf_regs->ucce, 0xffffffff);
-
-	*uccf_ret = uccf;
-	return 0;
-}
-EXPORT_SYMBOL(ucc_fast_init);
-
-void ucc_fast_free(struct ucc_fast_private * uccf)
-{
-	if (!uccf)
-		return;
-
-	if (uccf->ucc_fast_tx_virtual_fifo_base_offset)
-		qe_muram_free(uccf->ucc_fast_tx_virtual_fifo_base_offset);
-
-	if (uccf->ucc_fast_rx_virtual_fifo_base_offset)
-		qe_muram_free(uccf->ucc_fast_rx_virtual_fifo_base_offset);
-
-	if (uccf->uf_regs)
-		iounmap(uccf->uf_regs);
-
-	kfree(uccf);
-}
-EXPORT_SYMBOL(ucc_fast_free);
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
deleted file mode 100644
index 5f91628209eb..000000000000
--- a/arch/powerpc/sysdev/qe_lib/ucc_slow.c
+++ /dev/null
@@ -1,374 +0,0 @@
-/*
- * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Authors: 	Shlomi Gridish <gridish@freescale.com>
- * 		Li Yang <leoli@freescale.com>
- *
- * Description:
- * QE UCC Slow API Set - UCC Slow specific routines implementations.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/stddef.h>
-#include <linux/interrupt.h>
-#include <linux/err.h>
-#include <linux/export.h>
-
-#include <asm/io.h>
-#include <asm/immap_qe.h>
-#include <asm/qe.h>
-
-#include <asm/ucc.h>
-#include <asm/ucc_slow.h>
-
-u32 ucc_slow_get_qe_cr_subblock(int uccs_num)
-{
-	switch (uccs_num) {
-	case 0: return QE_CR_SUBBLOCK_UCCSLOW1;
-	case 1: return QE_CR_SUBBLOCK_UCCSLOW2;
-	case 2: return QE_CR_SUBBLOCK_UCCSLOW3;
-	case 3: return QE_CR_SUBBLOCK_UCCSLOW4;
-	case 4: return QE_CR_SUBBLOCK_UCCSLOW5;
-	case 5: return QE_CR_SUBBLOCK_UCCSLOW6;
-	case 6: return QE_CR_SUBBLOCK_UCCSLOW7;
-	case 7: return QE_CR_SUBBLOCK_UCCSLOW8;
-	default: return QE_CR_SUBBLOCK_INVALID;
-	}
-}
-EXPORT_SYMBOL(ucc_slow_get_qe_cr_subblock);
-
-void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs)
-{
-	struct ucc_slow_info *us_info = uccs->us_info;
-	u32 id;
-
-	id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
-	qe_issue_cmd(QE_GRACEFUL_STOP_TX, id,
-			 QE_CR_PROTOCOL_UNSPECIFIED, 0);
-}
-EXPORT_SYMBOL(ucc_slow_graceful_stop_tx);
-
-void ucc_slow_stop_tx(struct ucc_slow_private * uccs)
-{
-	struct ucc_slow_info *us_info = uccs->us_info;
-	u32 id;
-
-	id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
-	qe_issue_cmd(QE_STOP_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
-}
-EXPORT_SYMBOL(ucc_slow_stop_tx);
-
-void ucc_slow_restart_tx(struct ucc_slow_private * uccs)
-{
-	struct ucc_slow_info *us_info = uccs->us_info;
-	u32 id;
-
-	id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
-	qe_issue_cmd(QE_RESTART_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
-}
-EXPORT_SYMBOL(ucc_slow_restart_tx);
-
-void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode)
-{
-	struct ucc_slow *us_regs;
-	u32 gumr_l;
-
-	us_regs = uccs->us_regs;
-
-	/* Enable reception and/or transmission on this UCC. */
-	gumr_l = in_be32(&us_regs->gumr_l);
-	if (mode & COMM_DIR_TX) {
-		gumr_l |= UCC_SLOW_GUMR_L_ENT;
-		uccs->enabled_tx = 1;
-	}
-	if (mode & COMM_DIR_RX) {
-		gumr_l |= UCC_SLOW_GUMR_L_ENR;
-		uccs->enabled_rx = 1;
-	}
-	out_be32(&us_regs->gumr_l, gumr_l);
-}
-EXPORT_SYMBOL(ucc_slow_enable);
-
-void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode)
-{
-	struct ucc_slow *us_regs;
-	u32 gumr_l;
-
-	us_regs = uccs->us_regs;
-
-	/* Disable reception and/or transmission on this UCC. */
-	gumr_l = in_be32(&us_regs->gumr_l);
-	if (mode & COMM_DIR_TX) {
-		gumr_l &= ~UCC_SLOW_GUMR_L_ENT;
-		uccs->enabled_tx = 0;
-	}
-	if (mode & COMM_DIR_RX) {
-		gumr_l &= ~UCC_SLOW_GUMR_L_ENR;
-		uccs->enabled_rx = 0;
-	}
-	out_be32(&us_regs->gumr_l, gumr_l);
-}
-EXPORT_SYMBOL(ucc_slow_disable);
-
-/* Initialize the UCC for Slow operations
- *
- * The caller should initialize the following us_info
- */
-int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret)
-{
-	struct ucc_slow_private *uccs;
-	u32 i;
-	struct ucc_slow __iomem *us_regs;
-	u32 gumr;
-	struct qe_bd *bd;
-	u32 id;
-	u32 command;
-	int ret = 0;
-
-	if (!us_info)
-		return -EINVAL;
-
-	/* check if the UCC port number is in range. */
-	if ((us_info->ucc_num < 0) || (us_info->ucc_num > UCC_MAX_NUM - 1)) {
-		printk(KERN_ERR "%s: illegal UCC number\n", __func__);
-		return -EINVAL;
-	}
-
-	/*
-	 * Set mrblr
-	 * Check that 'max_rx_buf_length' is properly aligned (4), unless
-	 * rfw is 1, meaning that QE accepts one byte at a time, unlike normal
-	 * case when QE accepts 32 bits at a time.
-	 */
-	if ((!us_info->rfw) &&
-		(us_info->max_rx_buf_length & (UCC_SLOW_MRBLR_ALIGNMENT - 1))) {
-		printk(KERN_ERR "max_rx_buf_length not aligned.\n");
-		return -EINVAL;
-	}
-
-	uccs = kzalloc(sizeof(struct ucc_slow_private), GFP_KERNEL);
-	if (!uccs) {
-		printk(KERN_ERR "%s: Cannot allocate private data\n",
-			__func__);
-		return -ENOMEM;
-	}
-
-	/* Fill slow UCC structure */
-	uccs->us_info = us_info;
-	/* Set the PHY base address */
-	uccs->us_regs = ioremap(us_info->regs, sizeof(struct ucc_slow));
-	if (uccs->us_regs == NULL) {
-		printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__);
-		kfree(uccs);
-		return -ENOMEM;
-	}
-
-	uccs->saved_uccm = 0;
-	uccs->p_rx_frame = 0;
-	us_regs = uccs->us_regs;
-	uccs->p_ucce = (u16 *) & (us_regs->ucce);
-	uccs->p_uccm = (u16 *) & (us_regs->uccm);
-#ifdef STATISTICS
-	uccs->rx_frames = 0;
-	uccs->tx_frames = 0;
-	uccs->rx_discarded = 0;
-#endif				/* STATISTICS */
-
-	/* Get PRAM base */
-	uccs->us_pram_offset =
-		qe_muram_alloc(UCC_SLOW_PRAM_SIZE, ALIGNMENT_OF_UCC_SLOW_PRAM);
-	if (IS_ERR_VALUE(uccs->us_pram_offset)) {
-		printk(KERN_ERR "%s: cannot allocate MURAM for PRAM", __func__);
-		ucc_slow_free(uccs);
-		return -ENOMEM;
-	}
-	id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
-	qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, id, us_info->protocol,
-		     uccs->us_pram_offset);
-
-	uccs->us_pram = qe_muram_addr(uccs->us_pram_offset);
-
-	/* Set UCC to slow type */
-	ret = ucc_set_type(us_info->ucc_num, UCC_SPEED_TYPE_SLOW);
-	if (ret) {
-		printk(KERN_ERR "%s: cannot set UCC type", __func__);
-		ucc_slow_free(uccs);
-		return ret;
-	}
-
-	out_be16(&uccs->us_pram->mrblr, us_info->max_rx_buf_length);
-
-	INIT_LIST_HEAD(&uccs->confQ);
-
-	/* Allocate BDs. */
-	uccs->rx_base_offset =
-		qe_muram_alloc(us_info->rx_bd_ring_len * sizeof(struct qe_bd),
-				QE_ALIGNMENT_OF_BD);
-	if (IS_ERR_VALUE(uccs->rx_base_offset)) {
-		printk(KERN_ERR "%s: cannot allocate %u RX BDs\n", __func__,
-			us_info->rx_bd_ring_len);
-		uccs->rx_base_offset = 0;
-		ucc_slow_free(uccs);
-		return -ENOMEM;
-	}
-
-	uccs->tx_base_offset =
-		qe_muram_alloc(us_info->tx_bd_ring_len * sizeof(struct qe_bd),
-			QE_ALIGNMENT_OF_BD);
-	if (IS_ERR_VALUE(uccs->tx_base_offset)) {
-		printk(KERN_ERR "%s: cannot allocate TX BDs", __func__);
-		uccs->tx_base_offset = 0;
-		ucc_slow_free(uccs);
-		return -ENOMEM;
-	}
-
-	/* Init Tx bds */
-	bd = uccs->confBd = uccs->tx_bd = qe_muram_addr(uccs->tx_base_offset);
-	for (i = 0; i < us_info->tx_bd_ring_len - 1; i++) {
-		/* clear bd buffer */
-		out_be32(&bd->buf, 0);
-		/* set bd status and length */
-		out_be32((u32 *) bd, 0);
-		bd++;
-	}
-	/* for last BD set Wrap bit */
-	out_be32(&bd->buf, 0);
-	out_be32((u32 *) bd, cpu_to_be32(T_W));
-
-	/* Init Rx bds */
-	bd = uccs->rx_bd = qe_muram_addr(uccs->rx_base_offset);
-	for (i = 0; i < us_info->rx_bd_ring_len - 1; i++) {
-		/* set bd status and length */
-		out_be32((u32*)bd, 0);
-		/* clear bd buffer */
-		out_be32(&bd->buf, 0);
-		bd++;
-	}
-	/* for last BD set Wrap bit */
-	out_be32((u32*)bd, cpu_to_be32(R_W));
-	out_be32(&bd->buf, 0);
-
-	/* Set GUMR (For more details see the hardware spec.). */
-	/* gumr_h */
-	gumr = us_info->tcrc;
-	if (us_info->cdp)
-		gumr |= UCC_SLOW_GUMR_H_CDP;
-	if (us_info->ctsp)
-		gumr |= UCC_SLOW_GUMR_H_CTSP;
-	if (us_info->cds)
-		gumr |= UCC_SLOW_GUMR_H_CDS;
-	if (us_info->ctss)
-		gumr |= UCC_SLOW_GUMR_H_CTSS;
-	if (us_info->tfl)
-		gumr |= UCC_SLOW_GUMR_H_TFL;
-	if (us_info->rfw)
-		gumr |= UCC_SLOW_GUMR_H_RFW;
-	if (us_info->txsy)
-		gumr |= UCC_SLOW_GUMR_H_TXSY;
-	if (us_info->rtsm)
-		gumr |= UCC_SLOW_GUMR_H_RTSM;
-	out_be32(&us_regs->gumr_h, gumr);
-
-	/* gumr_l */
-	gumr = us_info->tdcr | us_info->rdcr | us_info->tenc | us_info->renc |
-		us_info->diag | us_info->mode;
-	if (us_info->tci)
-		gumr |= UCC_SLOW_GUMR_L_TCI;
-	if (us_info->rinv)
-		gumr |= UCC_SLOW_GUMR_L_RINV;
-	if (us_info->tinv)
-		gumr |= UCC_SLOW_GUMR_L_TINV;
-	if (us_info->tend)
-		gumr |= UCC_SLOW_GUMR_L_TEND;
-	out_be32(&us_regs->gumr_l, gumr);
-
-	/* Function code registers */
-
-	/* if the data is in cachable memory, the 'global' */
-	/* in the function code should be set. */
-	uccs->us_pram->tbmr = UCC_BMR_BO_BE;
-	uccs->us_pram->rbmr = UCC_BMR_BO_BE;
-
-	/* rbase, tbase are offsets from MURAM base */
-	out_be16(&uccs->us_pram->rbase, uccs->rx_base_offset);
-	out_be16(&uccs->us_pram->tbase, uccs->tx_base_offset);
-
-	/* Mux clocking */
-	/* Grant Support */
-	ucc_set_qe_mux_grant(us_info->ucc_num, us_info->grant_support);
-	/* Breakpoint Support */
-	ucc_set_qe_mux_bkpt(us_info->ucc_num, us_info->brkpt_support);
-	/* Set Tsa or NMSI mode. */
-	ucc_set_qe_mux_tsa(us_info->ucc_num, us_info->tsa);
-	/* If NMSI (not Tsa), set Tx and Rx clock. */
-	if (!us_info->tsa) {
-		/* Rx clock routing */
-		if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->rx_clock,
-					COMM_DIR_RX)) {
-			printk(KERN_ERR "%s: illegal value for RX clock\n",
-			       __func__);
-			ucc_slow_free(uccs);
-			return -EINVAL;
-		}
-		/* Tx clock routing */
-		if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->tx_clock,
-					COMM_DIR_TX)) {
-			printk(KERN_ERR "%s: illegal value for TX clock\n",
-			       __func__);
-			ucc_slow_free(uccs);
-			return -EINVAL;
-		}
-	}
-
-	/* Set interrupt mask register at UCC level. */
-	out_be16(&us_regs->uccm, us_info->uccm_mask);
-
-	/* First, clear anything pending at UCC level,
-	 * otherwise, old garbage may come through
-	 * as soon as the dam is opened. */
-
-	/* Writing '1' clears */
-	out_be16(&us_regs->ucce, 0xffff);
-
-	/* Issue QE Init command */
-	if (us_info->init_tx && us_info->init_rx)
-		command = QE_INIT_TX_RX;
-	else if (us_info->init_tx)
-		command = QE_INIT_TX;
-	else
-		command = QE_INIT_RX;	/* We know at least one is TRUE */
-
-	qe_issue_cmd(command, id, us_info->protocol, 0);
-
-	*uccs_ret = uccs;
-	return 0;
-}
-EXPORT_SYMBOL(ucc_slow_init);
-
-void ucc_slow_free(struct ucc_slow_private * uccs)
-{
-	if (!uccs)
-		return;
-
-	if (uccs->rx_base_offset)
-		qe_muram_free(uccs->rx_base_offset);
-
-	if (uccs->tx_base_offset)
-		qe_muram_free(uccs->tx_base_offset);
-
-	if (uccs->us_pram)
-		qe_muram_free(uccs->us_pram_offset);
-
-	if (uccs->us_regs)
-		iounmap(uccs->us_regs);
-
-	kfree(uccs);
-}
-EXPORT_SYMBOL(ucc_slow_free);
-
diff --git a/arch/powerpc/sysdev/qe_lib/usb.c b/arch/powerpc/sysdev/qe_lib/usb.c
deleted file mode 100644
index 27f23bd15eb6..000000000000
--- a/arch/powerpc/sysdev/qe_lib/usb.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * QE USB routines
- *
- * Copyright 2006 Freescale Semiconductor, Inc.
- *               Shlomi Gridish <gridish@freescale.com>
- *               Jerry Huang <Chang-Ming.Huang@freescale.com>
- * Copyright (c) MontaVista Software, Inc. 2008.
- *               Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/export.h>
-#include <linux/io.h>
-#include <asm/immap_qe.h>
-#include <asm/qe.h>
-
-int qe_usb_clock_set(enum qe_clock clk, int rate)
-{
-	struct qe_mux __iomem *mux = &qe_immr->qmx;
-	unsigned long flags;
-	u32 val;
-
-	switch (clk) {
-	case QE_CLK3:  val = QE_CMXGCR_USBCS_CLK3;  break;
-	case QE_CLK5:  val = QE_CMXGCR_USBCS_CLK5;  break;
-	case QE_CLK7:  val = QE_CMXGCR_USBCS_CLK7;  break;
-	case QE_CLK9:  val = QE_CMXGCR_USBCS_CLK9;  break;
-	case QE_CLK13: val = QE_CMXGCR_USBCS_CLK13; break;
-	case QE_CLK17: val = QE_CMXGCR_USBCS_CLK17; break;
-	case QE_CLK19: val = QE_CMXGCR_USBCS_CLK19; break;
-	case QE_CLK21: val = QE_CMXGCR_USBCS_CLK21; break;
-	case QE_BRG9:  val = QE_CMXGCR_USBCS_BRG9;  break;
-	case QE_BRG10: val = QE_CMXGCR_USBCS_BRG10; break;
-	default:
-		pr_err("%s: requested unknown clock %d\n", __func__, clk);
-		return -EINVAL;
-	}
-
-	if (qe_clock_is_brg(clk))
-		qe_setbrg(clk, rate, 1);
-
-	spin_lock_irqsave(&cmxgcr_lock, flags);
-
-	clrsetbits_be32(&mux->cmxgcr, QE_CMXGCR_USBCS, val);
-
-	spin_unlock_irqrestore(&cmxgcr_lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(qe_usb_clock_set);