Merge commit 'linus/master' into merge-linus

Conflicts:

	arch/x86/kvm/i8254.c

62 files changed, 1353 insertions, 829 deletions

diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 249ba01c6674..79c1154f88d4 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -2,6 +2,7 @@ config BAMBOO
 	bool "Bamboo"
 	depends on 44x
 	default n
+	select PPC44x_SIMPLE
 	select 440EP
 	select PCI
 	help
@@ -30,6 +31,7 @@ config SEQUOIA
 	bool "Sequoia"
 	depends on 44x
 	default n
+	select PPC44x_SIMPLE
 	select 440EPX
 	help
 	  This option enables support for the AMCC PPC440EPX evaluation board.
@@ -38,6 +40,7 @@ config TAISHAN
 	bool "Taishan"
 	depends on 44x
 	default n
+	select PPC44x_SIMPLE
 	select 440GX
 	select PCI
 	help
@@ -48,6 +51,7 @@ config KATMAI
 	bool "Katmai"
 	depends on 44x
 	default n
+	select PPC44x_SIMPLE
 	select 440SPe
 	select PCI
 	select PPC4xx_PCI_EXPRESS
@@ -58,6 +62,7 @@ config RAINIER
 	bool "Rainier"
 	depends on 44x
 	default n
+	select PPC44x_SIMPLE
 	select 440GRX
 	select PCI
 	help
@@ -76,20 +81,48 @@ config WARP
 	  See http://www.pikatechnologies.com/ and follow the "PIKA for Computer
 	  Telephony Developers" link for more information.
 
+config ARCHES
+	bool "Arches"
+	depends on 44x
+	default n
+	select PPC44x_SIMPLE
+	select 460EX # Odd since it uses 460GT but the effects are the same
+	select PCI
+	select PPC4xx_PCI_EXPRESS
+	help
+	  This option enables support for the AMCC Dual PPC460GT evaluation board.
+
 config CANYONLANDS
 	bool "Canyonlands"
 	depends on 44x
 	default n
+	select PPC44x_SIMPLE
 	select 460EX
 	select PCI
 	select PPC4xx_PCI_EXPRESS
+	select IBM_NEW_EMAC_RGMII
+	select IBM_NEW_EMAC_ZMII
 	help
 	  This option enables support for the AMCC PPC460EX evaluation board.
 
+config GLACIER
+	bool "Glacier"
+	depends on 44x
+	default n
+	select PPC44x_SIMPLE
+	select 460EX # Odd since it uses 460GT but the effects are the same
+	select PCI
+	select PPC4xx_PCI_EXPRESS
+	select IBM_NEW_EMAC_RGMII
+	select IBM_NEW_EMAC_ZMII
+	help
+	  This option enables support for the AMCC PPC460GT evaluation board.
+
 config YOSEMITE
 	bool "Yosemite"
 	depends on 44x
 	default n
+	select PPC44x_SIMPLE
 	select 440EP
 	select PCI
 	help
@@ -127,6 +160,13 @@ config XILINX_VIRTEX440_GENERIC_BOARD
 	  Most Virtex 5 designs should use this unless it needs to do some
 	  special configuration at board probe time.
 
+config PPC44x_SIMPLE
+	bool "Simple PowerPC 44x board support"
+	depends on 44x
+	default n
+	help
+	  This option enables the simple PowerPC 44x platform support.
+
 # 44x specific CPU modules, selected based on the board above.
 config 440EP
 	bool
@@ -170,8 +210,6 @@ config 460EX
 	bool
 	select PPC_FPU
 	select IBM_NEW_EMAC_EMAC4
-	select IBM_NEW_EMAC_RGMII
-	select IBM_NEW_EMAC_ZMII
 	select IBM_NEW_EMAC_TAH
 
 # 44x errata/workaround config symbols, selected by the CPU models above
diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile
index 8d0b1a192d62..698133180aee 100644
--- a/arch/powerpc/platforms/44x/Makefile
+++ b/arch/powerpc/platforms/44x/Makefile
@@ -1,13 +1,7 @@
 obj-$(CONFIG_44x)	:= misc_44x.o idle.o
+obj-$(CONFIG_PPC44x_SIMPLE) += ppc44x_simple.o
 obj-$(CONFIG_EBONY)	+= ebony.o
-obj-$(CONFIG_TAISHAN)	+= taishan.o
-obj-$(CONFIG_BAMBOO)	+= bamboo.o
-obj-$(CONFIG_YOSEMITE)	+= bamboo.o
 obj-$(CONFIG_SAM440EP) 	+= sam440ep.o
-obj-$(CONFIG_SEQUOIA)	+= sequoia.o
-obj-$(CONFIG_KATMAI)	+= katmai.o
-obj-$(CONFIG_RAINIER)	+= rainier.o
 obj-$(CONFIG_WARP)	+= warp.o
 obj-$(CONFIG_WARP)	+= warp-nand.o
-obj-$(CONFIG_CANYONLANDS) += canyonlands.o
 obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o
diff --git a/arch/powerpc/platforms/44x/bamboo.c b/arch/powerpc/platforms/44x/bamboo.c
deleted file mode 100644
index cef169e95156..000000000000
--- a/arch/powerpc/platforms/44x/bamboo.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Bamboo board specific routines
- *
- * Wade Farnsworth <wfarnsworth@mvista.com>
- * Copyright 2004 MontaVista Software Inc.
- *
- * Rewritten and ported to the merged powerpc tree:
- * Josh Boyer <jwboyer@linux.vnet.ibm.com>
- * Copyright 2007 IBM Corporation
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/init.h>
-#include <linux/of_platform.h>
-
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/time.h>
-#include <asm/uic.h>
-#include <asm/pci-bridge.h>
-#include <asm/ppc4xx.h>
-
-static __initdata struct of_device_id bamboo_of_bus[] = {
-	{ .compatible = "ibm,plb4", },
-	{ .compatible = "ibm,opb", },
-	{ .compatible = "ibm,ebc", },
-	{},
-};
-
-static int __init bamboo_device_probe(void)
-{
-	of_platform_bus_probe(NULL, bamboo_of_bus, NULL);
-
-	return 0;
-}
-machine_device_initcall(bamboo, bamboo_device_probe);
-
-static int __init bamboo_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-
-	if (!of_flat_dt_is_compatible(root, "amcc,bamboo"))
-		return 0;
-
-	ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
-
-	return 1;
-}
-
-define_machine(bamboo) {
-	.name 			= "Bamboo",
-	.probe 			= bamboo_probe,
-	.progress 		= udbg_progress,
-	.init_IRQ 		= uic_init_tree,
-	.get_irq 		= uic_get_irq,
-	.restart		= ppc4xx_reset_system,
-	.calibrate_decr 	= generic_calibrate_decr,
-};
diff --git a/arch/powerpc/platforms/44x/canyonlands.c b/arch/powerpc/platforms/44x/canyonlands.c
deleted file mode 100644
index 3949289f51df..000000000000
--- a/arch/powerpc/platforms/44x/canyonlands.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Canyonlands board specific routines
- *
- * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
- *
- * Based on the Katmai code by
- * Benjamin Herrenschmidt <benh@kernel.crashing.org>
- * Copyright 2007 IBM Corp.
- * Josh Boyer <jwboyer@linux.vnet.ibm.com>
- * Copyright 2007 IBM Corporation
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/init.h>
-#include <linux/of_platform.h>
-
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/time.h>
-#include <asm/uic.h>
-#include <asm/pci-bridge.h>
-#include <asm/ppc4xx.h>
-
-static __initdata struct of_device_id canyonlands_of_bus[] = {
-	{ .compatible = "ibm,plb4", },
-	{ .compatible = "ibm,opb", },
-	{ .compatible = "ibm,ebc", },
-	{},
-};
-
-static int __init canyonlands_device_probe(void)
-{
-	of_platform_bus_probe(NULL, canyonlands_of_bus, NULL);
-
-	return 0;
-}
-machine_device_initcall(canyonlands, canyonlands_device_probe);
-
-static int __init canyonlands_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-
-	if (!of_flat_dt_is_compatible(root, "amcc,canyonlands"))
-		return 0;
-
-	ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
-
-	return 1;
-}
-
-define_machine(canyonlands) {
-	.name 				= "Canyonlands",
-	.probe 				= canyonlands_probe,
-	.progress 			= udbg_progress,
-	.init_IRQ 			= uic_init_tree,
-	.get_irq 			= uic_get_irq,
-	.restart			= ppc4xx_reset_system,
-	.calibrate_decr			= generic_calibrate_decr,
-};
diff --git a/arch/powerpc/platforms/44x/katmai.c b/arch/powerpc/platforms/44x/katmai.c
deleted file mode 100644
index 44f4b3a00ced..000000000000
--- a/arch/powerpc/platforms/44x/katmai.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Katmai board specific routines
- *
- * Benjamin Herrenschmidt <benh@kernel.crashing.org>
- * Copyright 2007 IBM Corp.
- *
- * Based on the Bamboo code by
- * Josh Boyer <jwboyer@linux.vnet.ibm.com>
- * Copyright 2007 IBM Corporation
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/init.h>
-#include <linux/of_platform.h>
-
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/time.h>
-#include <asm/uic.h>
-#include <asm/pci-bridge.h>
-#include <asm/ppc4xx.h>
-
-static __initdata struct of_device_id katmai_of_bus[] = {
-	{ .compatible = "ibm,plb4", },
-	{ .compatible = "ibm,opb", },
-	{ .compatible = "ibm,ebc", },
-	{},
-};
-
-static int __init katmai_device_probe(void)
-{
-	of_platform_bus_probe(NULL, katmai_of_bus, NULL);
-
-	return 0;
-}
-machine_device_initcall(katmai, katmai_device_probe);
-
-static int __init katmai_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-
-	if (!of_flat_dt_is_compatible(root, "amcc,katmai"))
-		return 0;
-
-	ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
-
-	return 1;
-}
-
-define_machine(katmai) {
-	.name 				= "Katmai",
-	.probe 				= katmai_probe,
-	.progress 			= udbg_progress,
-	.init_IRQ 			= uic_init_tree,
-	.get_irq 			= uic_get_irq,
-	.restart			= ppc4xx_reset_system,
-	.calibrate_decr			= generic_calibrate_decr,
-};
diff --git a/arch/powerpc/platforms/44x/ppc44x_simple.c b/arch/powerpc/platforms/44x/ppc44x_simple.c
new file mode 100644
index 000000000000..29671262801f
--- /dev/null
+++ b/arch/powerpc/platforms/44x/ppc44x_simple.c
@@ -0,0 +1,88 @@
+/*
+ * Generic PowerPC 44x platform support
+ *
+ * Copyright 2008 IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; version 2 of the License.
+ *
+ * This implements simple platform support for PowerPC 44x chips.  This is
+ * mostly used for eval boards or other simple and "generic" 44x boards.  If
+ * your board has custom functions or hardware, then you will likely want to
+ * implement your own board.c file to accommodate it.
+ */
+
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/ppc4xx.h>
+#include <asm/prom.h>
+#include <asm/time.h>
+#include <asm/udbg.h>
+#include <asm/uic.h>
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+
+static __initdata struct of_device_id ppc44x_of_bus[] = {
+	{ .compatible = "ibm,plb4", },
+	{ .compatible = "ibm,opb", },
+	{ .compatible = "ibm,ebc", },
+	{ .compatible = "simple-bus", },
+	{},
+};
+
+static int __init ppc44x_device_probe(void)
+{
+	of_platform_bus_probe(NULL, ppc44x_of_bus, NULL);
+
+	return 0;
+}
+machine_device_initcall(ppc44x_simple, ppc44x_device_probe);
+
+/* This is the list of boards that can be supported by this simple
+ * platform code.  This does _not_ mean the boards are compatible,
+ * as they most certainly are not from a device tree perspective.
+ * However, their differences are handled by the device tree and the
+ * drivers and therefore they don't need custom board support files.
+ *
+ * Again, if your board needs to do things differently then create a
+ * board.c file for it rather than adding it to this list.
+ */
+static char *board[] __initdata = {
+	"amcc,arches",
+	"amcc,bamboo",
+	"amcc,canyonlands",
+	"amcc,glacier",
+	"ibm,ebony",
+	"amcc,katmai",
+	"amcc,rainier",
+	"amcc,sequoia",
+	"amcc,taishan",
+	"amcc,yosemite"
+};
+
+static int __init ppc44x_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+	int i = 0;
+
+	for (i = 0; i < ARRAY_SIZE(board); i++) {
+		if (of_flat_dt_is_compatible(root, board[i])) {
+			ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+define_machine(ppc44x_simple) {
+	.name = "PowerPC 44x Platform",
+	.probe = ppc44x_probe,
+	.progress = udbg_progress,
+	.init_IRQ = uic_init_tree,
+	.get_irq = uic_get_irq,
+	.restart = ppc4xx_reset_system,
+	.calibrate_decr = generic_calibrate_decr,
+};
diff --git a/arch/powerpc/platforms/44x/rainier.c b/arch/powerpc/platforms/44x/rainier.c
deleted file mode 100644
index 4f1ff84c4b63..000000000000
--- a/arch/powerpc/platforms/44x/rainier.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Rainier board specific routines
- *
- * Valentine Barshak <vbarshak@ru.mvista.com>
- * Copyright 2007 MontaVista Software Inc.
- *
- * Based on the Bamboo code by
- * Josh Boyer <jwboyer@linux.vnet.ibm.com>
- * Copyright 2007 IBM Corporation
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/init.h>
-#include <linux/of_platform.h>
-
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/time.h>
-#include <asm/uic.h>
-#include <asm/pci-bridge.h>
-#include <asm/ppc4xx.h>
-
-static __initdata struct of_device_id rainier_of_bus[] = {
-	{ .compatible = "ibm,plb4", },
-	{ .compatible = "ibm,opb", },
-	{ .compatible = "ibm,ebc", },
-	{},
-};
-
-static int __init rainier_device_probe(void)
-{
-	of_platform_bus_probe(NULL, rainier_of_bus, NULL);
-
-	return 0;
-}
-machine_device_initcall(rainier, rainier_device_probe);
-
-static int __init rainier_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-
-	if (!of_flat_dt_is_compatible(root, "amcc,rainier"))
-		return 0;
-
-	ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
-
-	return 1;
-}
-
-define_machine(rainier) {
-	.name 				= "Rainier",
-	.probe 				= rainier_probe,
-	.progress 			= udbg_progress,
-	.init_IRQ 			= uic_init_tree,
-	.get_irq 			= uic_get_irq,
-	.restart			= ppc4xx_reset_system,
-	.calibrate_decr			= generic_calibrate_decr,
-};
diff --git a/arch/powerpc/platforms/44x/sequoia.c b/arch/powerpc/platforms/44x/sequoia.c
deleted file mode 100644
index 49eb73daacdf..000000000000
--- a/arch/powerpc/platforms/44x/sequoia.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Sequoia board specific routines
- *
- * Valentine Barshak <vbarshak@ru.mvista.com>
- * Copyright 2007 MontaVista Software Inc.
- *
- * Based on the Bamboo code by
- * Josh Boyer <jwboyer@linux.vnet.ibm.com>
- * Copyright 2007 IBM Corporation
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/init.h>
-#include <linux/of_platform.h>
-
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/time.h>
-#include <asm/uic.h>
-#include <asm/pci-bridge.h>
-
-#include <asm/ppc4xx.h>
-
-static __initdata struct of_device_id sequoia_of_bus[] = {
-	{ .compatible = "ibm,plb4", },
-	{ .compatible = "ibm,opb", },
-	{ .compatible = "ibm,ebc", },
-	{},
-};
-
-static int __init sequoia_device_probe(void)
-{
-	of_platform_bus_probe(NULL, sequoia_of_bus, NULL);
-
-	return 0;
-}
-machine_device_initcall(sequoia, sequoia_device_probe);
-
-static int __init sequoia_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-
-	if (!of_flat_dt_is_compatible(root, "amcc,sequoia"))
-		return 0;
-
-	ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
-
-	return 1;
-}
-
-define_machine(sequoia) {
-	.name 				= "Sequoia",
-	.probe 				= sequoia_probe,
-	.progress 			= udbg_progress,
-	.init_IRQ 			= uic_init_tree,
-	.get_irq 			= uic_get_irq,
-	.restart			= ppc4xx_reset_system,
-	.calibrate_decr			= generic_calibrate_decr,
-};
diff --git a/arch/powerpc/platforms/44x/taishan.c b/arch/powerpc/platforms/44x/taishan.c
deleted file mode 100644
index 49c78b2098b4..000000000000
--- a/arch/powerpc/platforms/44x/taishan.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Taishan board specific routines based off ebony.c code
- * original copyrights below
- *
- * Matt Porter <mporter@kernel.crashing.org>
- * Copyright 2002-2005 MontaVista Software Inc.
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003-2005 Zultys Technologies
- *
- * Rewritten and ported to the merged powerpc tree:
- * Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation.
- *
- * Modified from ebony.c for taishan:
- * Copyright 2007 Hugh Blemings <hugh@au.ibm.com>, IBM Corporation.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/of_platform.h>
-
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/time.h>
-#include <asm/uic.h>
-#include <asm/pci-bridge.h>
-#include <asm/ppc4xx.h>
-
-static __initdata struct of_device_id taishan_of_bus[] = {
-	{ .compatible = "ibm,plb4", },
-	{ .compatible = "ibm,opb", },
-	{ .compatible = "ibm,ebc", },
-	{},
-};
-
-static int __init taishan_device_probe(void)
-{
-	of_platform_bus_probe(NULL, taishan_of_bus, NULL);
-
-	return 0;
-}
-machine_device_initcall(taishan, taishan_device_probe);
-
-/*
- * Called very early, MMU is off, device-tree isn't unflattened
- */
-static int __init taishan_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-
-	if (!of_flat_dt_is_compatible(root, "amcc,taishan"))
-		return 0;
-
-	ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
-
-	return 1;
-}
-
-define_machine(taishan) {
-	.name			= "Taishan",
-	.probe			= taishan_probe,
-	.progress		= udbg_progress,
-	.init_IRQ		= uic_init_tree,
-	.get_irq		= uic_get_irq,
-	.restart		= ppc4xx_reset_system,
-	.calibrate_decr		= generic_calibrate_decr,
-};
diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig
index c62f893ede19..326852c78b8f 100644
--- a/arch/powerpc/platforms/512x/Kconfig
+++ b/arch/powerpc/platforms/512x/Kconfig
@@ -3,6 +3,8 @@ config PPC_MPC512x
 	select FSL_SOC
 	select IPIC
 	select PPC_CLOCK
+	select PPC_PCI_CHOICE
+	select FSL_PCI if PCI
 
 config PPC_MPC5121
 	bool
diff --git a/arch/powerpc/platforms/512x/mpc5121_ads.c b/arch/powerpc/platforms/512x/mpc5121_ads.c
index 5ebf6939a697..441abc488851 100644
--- a/arch/powerpc/platforms/512x/mpc5121_ads.c
+++ b/arch/powerpc/platforms/512x/mpc5121_ads.c
@@ -22,16 +22,26 @@
 #include <asm/prom.h>
 #include <asm/time.h>
 
+#include <sysdev/fsl_pci.h>
+
 #include "mpc512x.h"
 #include "mpc5121_ads.h"
 
 static void __init mpc5121_ads_setup_arch(void)
 {
+#ifdef CONFIG_PCI
+	struct device_node *np;
+#endif
 	printk(KERN_INFO "MPC5121 ADS board from Freescale Semiconductor\n");
 	/*
 	 * cpld regs are needed early
 	 */
 	mpc5121_ads_cpld_map();
+
+#ifdef CONFIG_PCI
+	for_each_compatible_node(np, "pci", "fsl,mpc5121-pci")
+		mpc83xx_add_bridge(np);
+#endif
 }
 
 static void __init mpc5121_ads_init_IRQ(void)
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c
index 4d5fd1dbd400..044b4e6e8743 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_common.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c
@@ -90,7 +90,7 @@ mpc5200_setup_xlb_arbiter(void)
 	of_node_put(np);
 	if (!xlb) {
 		printk(KERN_ERR __FILE__ ": "
-			"Error mapping XLB in mpc52xx_setup_cpu().  "
+			"Error mapping XLB in mpc52xx_setup_cpu(). "
 			"Expect some abnormal behavior\n");
 		return;
 	}
@@ -216,7 +216,8 @@ mpc52xx_restart(char *cmd)
 		out_be32(&mpc52xx_wdt->count, 0x000000ff);
 		out_be32(&mpc52xx_wdt->mode, 0x00009004);
 	} else
-		printk("mpc52xx_restart: Can't access wdt. "
+		printk(KERN_ERR __FILE__ ": "
+			"mpc52xx_restart: Can't access wdt. "
 			"Restart impossible, system halted.\n");
 
 	while (1);
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pci.c b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
index 5a382bb15f62..b49a18527661 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pci.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
@@ -265,8 +265,11 @@ mpc52xx_pci_setup(struct pci_controller *hose,
 	/* Memory windows */
 	res = &hose->mem_resources[0];
 	if (res->flags) {
-		pr_debug("mem_resource[0] = {.start=%x, .end=%x, .flags=%lx}\n",
-		         res->start, res->end, res->flags);
+		pr_debug("mem_resource[0] = "
+		         "{.start=%llx, .end=%llx, .flags=%llx}\n",
+		         (unsigned long long)res->start,
+			 (unsigned long long)res->end,
+			 (unsigned long long)res->flags);
 		out_be32(&pci_regs->iw0btar,
 		         MPC52xx_PCI_IWBTAR_TRANSLATION(res->start, res->start,
 		                  res->end - res->start + 1));
@@ -297,9 +300,11 @@ mpc52xx_pci_setup(struct pci_controller *hose,
 		printk(KERN_ERR "%s: Didn't find IO resources\n", __FILE__);
 		return;
 	}
-	pr_debug(".io_resource={.start=%x,.end=%x,.flags=%lx} "
+	pr_debug(".io_resource={.start=%llx,.end=%llx,.flags=%llx} "
 	         ".io_base_phys=0x%p\n",
-	         res->start, res->end, res->flags, (void*)hose->io_base_phys);
+	         (unsigned long long)res->start,
+		 (unsigned long long)res->end,
+		 (unsigned long long)res->flags, (void*)hose->io_base_phys);
 	out_be32(&pci_regs->iw2btar,
 	         MPC52xx_PCI_IWBTAR_TRANSLATION(hose->io_base_phys,
 	                                        res->start,
diff --git a/arch/powerpc/platforms/82xx/Kconfig b/arch/powerpc/platforms/82xx/Kconfig
index 75eb1ede5497..30f008b2f92e 100644
--- a/arch/powerpc/platforms/82xx/Kconfig
+++ b/arch/powerpc/platforms/82xx/Kconfig
@@ -38,6 +38,14 @@ config EP8248E
 	  This board is also resold by Freescale as the QUICCStart
 	  MPC8248 Evaluation System and/or the CWH-PPC-8248N-VE.
 
+config MGCOGE
+	bool "Keymile MGCOGE"
+	select 8272
+	select 8260
+	select FSL_SOC
+	help
+	  This enables support for the Keymile MGCOGE board.
+
 endif
 
 config PQ2ADS
diff --git a/arch/powerpc/platforms/82xx/Makefile b/arch/powerpc/platforms/82xx/Makefile
index 6cd5cd59bf2a..d982793f4dbd 100644
--- a/arch/powerpc/platforms/82xx/Makefile
+++ b/arch/powerpc/platforms/82xx/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_CPM2) += pq2.o
 obj-$(CONFIG_PQ2_ADS_PCI_PIC) += pq2ads-pci-pic.o
 obj-$(CONFIG_PQ2FADS) += pq2fads.o
 obj-$(CONFIG_EP8248E) += ep8248e.o
+obj-$(CONFIG_MGCOGE) += mgcoge.o
diff --git a/arch/powerpc/platforms/82xx/ep8248e.c b/arch/powerpc/platforms/82xx/ep8248e.c
index d5770fdf7f09..0eb6d7f62241 100644
--- a/arch/powerpc/platforms/82xx/ep8248e.c
+++ b/arch/powerpc/platforms/82xx/ep8248e.c
@@ -137,7 +137,7 @@ static int __devinit ep8248e_mdio_probe(struct of_device *ofdev,
 		bus->irq[i] = -1;
 
 	bus->name = "ep8248e-mdio-bitbang";
-	bus->dev = &ofdev->dev;
+	bus->parent = &ofdev->dev;
 	snprintf(bus->id, MII_BUS_ID_SIZE, "%x", res.start);
 
 	return mdiobus_register(bus);
diff --git a/arch/powerpc/platforms/82xx/mgcoge.c b/arch/powerpc/platforms/82xx/mgcoge.c
new file mode 100644
index 000000000000..c2af169c1d1d
--- /dev/null
+++ b/arch/powerpc/platforms/82xx/mgcoge.c
@@ -0,0 +1,129 @@
+/*
+ * Keymile mgcoge support
+ * Copyright 2008 DENX Software Engineering GmbH
+ * Author: Heiko Schocher <hs@denx.de>
+ *
+ * based on code from:
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/fsl_devices.h>
+#include <linux/of_platform.h>
+
+#include <asm/io.h>
+#include <asm/cpm2.h>
+#include <asm/udbg.h>
+#include <asm/machdep.h>
+#include <asm/time.h>
+#include <asm/mpc8260.h>
+#include <asm/prom.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/cpm2_pic.h>
+
+#include "pq2.h"
+
+static void __init mgcoge_pic_init(void)
+{
+	struct device_node *np = of_find_compatible_node(NULL, NULL, "fsl,pq2-pic");
+	if (!np) {
+		printk(KERN_ERR "PIC init: can not find cpm-pic node\n");
+		return;
+	}
+
+	cpm2_pic_init(np);
+	of_node_put(np);
+}
+
+struct cpm_pin {
+	int port, pin, flags;
+};
+
+static __initdata struct cpm_pin mgcoge_pins[] = {
+
+	/* SMC2 */
+	{1, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 9, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+
+	/* SCC4 */
+	{3, 25, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{3, 24, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{3,  9, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{3,  8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{4, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{4, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+};
+
+static void __init init_ioports(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(mgcoge_pins); i++) {
+		const struct cpm_pin *pin = &mgcoge_pins[i];
+		cpm2_set_pin(pin->port - 1, pin->pin, pin->flags);
+	}
+
+	cpm2_smc_clk_setup(CPM_CLK_SMC2, CPM_BRG8);
+	cpm2_clk_setup(CPM_CLK_SCC4, CPM_CLK7, CPM_CLK_RX);
+	cpm2_clk_setup(CPM_CLK_SCC4, CPM_CLK8, CPM_CLK_TX);
+}
+
+static void __init mgcoge_setup_arch(void)
+{
+	if (ppc_md.progress)
+		ppc_md.progress("mgcoge_setup_arch()", 0);
+
+	cpm2_reset();
+
+	/* When this is set, snooping CPM DMA from RAM causes
+	 * machine checks.  See erratum SIU18.
+	 */
+	clrbits32(&cpm2_immr->im_siu_conf.siu_82xx.sc_bcr, MPC82XX_BCR_PLDP);
+
+	init_ioports();
+
+	if (ppc_md.progress)
+		ppc_md.progress("mgcoge_setup_arch(), finish", 0);
+}
+
+static  __initdata struct of_device_id of_bus_ids[] = {
+	{ .compatible = "simple-bus", },
+	{},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+	of_platform_bus_probe(NULL, of_bus_ids, NULL);
+
+	return 0;
+}
+machine_device_initcall(mgcoge, declare_of_platform_devices);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init mgcoge_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+	return of_flat_dt_is_compatible(root, "keymile,mgcoge");
+}
+
+define_machine(mgcoge)
+{
+	.name = "Keymile MGCOGE",
+	.probe = mgcoge_probe,
+	.setup_arch = mgcoge_setup_arch,
+	.init_IRQ = mgcoge_pic_init,
+	.get_irq = cpm2_get_irq,
+	.calibrate_decr = generic_calibrate_decr,
+	.restart = pq2_restart,
+	.progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 6159c5d4e5f1..83c664afc897 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -19,7 +19,6 @@ config MPC831x_RDB
 config MPC832x_MDS
 	bool "Freescale MPC832x MDS"
 	select DEFAULT_UIMAGE
-	select QUICC_ENGINE
 	select PPC_MPC832x
 	help
 	  This option enables support for the MPC832x MDS evaluation board.
@@ -27,7 +26,6 @@ config MPC832x_MDS
 config MPC832x_RDB
 	bool "Freescale MPC832x RDB"
 	select DEFAULT_UIMAGE
-	select QUICC_ENGINE
 	select PPC_MPC832x
 	help
 	  This option enables support for the MPC8323 RDB board.
@@ -57,15 +55,12 @@ config MPC834x_ITX
 config MPC836x_MDS
 	bool "Freescale MPC836x MDS"
 	select DEFAULT_UIMAGE
-	select QUICC_ENGINE
 	help
 	  This option enables support for the MPC836x MDS Processor Board.
 
 config MPC836x_RDK
 	bool "Freescale/Logic MPC836x RDK"
 	select DEFAULT_UIMAGE
-	select QUICC_ENGINE
-	select QE_GPIO
 	select FSL_GTM
 	select FSL_LBC
 	help
diff --git a/arch/powerpc/platforms/83xx/mpc837x_mds.c b/arch/powerpc/platforms/83xx/mpc837x_mds.c
index be62de23bead..8bb13c807142 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_mds.c
@@ -85,8 +85,14 @@ static void __init mpc837x_mds_setup_arch(void)
 		ppc_md.progress("mpc837x_mds_setup_arch()", 0);
 
 #ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
+	for_each_compatible_node(np, "pci", "fsl,mpc8349-pci") {
+		if (!of_device_is_available(np)) {
+			pr_warning("%s: disabled by the firmware.\n",
+				   np->full_name);
+			continue;
+		}
 		mpc83xx_add_bridge(np);
+	}
 #endif
 	mpc837xmds_usb_cfg();
 }
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 291675b0097a..b79dc710ed34 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -33,7 +33,6 @@ config MPC85xx_CDS
 config MPC85xx_MDS
 	bool "Freescale MPC85xx MDS"
 	select DEFAULT_UIMAGE
-	select QUICC_ENGINE
 	select PHYLIB
 	help
 	  This option enables support for the MPC85xx MDS board
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
index d17807a6b89a..0293e3d3580f 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
@@ -213,7 +213,6 @@ static void mpc85xx_ads_show_cpuinfo(struct seq_file *m)
 	svid = mfspr(SPRN_SVR);
 
 	seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
-	seq_printf(m, "Machine\t\t: mpc85xx\n");
 	seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
 	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
 
diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c
index 6509ade71668..0c9a856f66b6 100644
--- a/arch/powerpc/platforms/85xx/sbc8560.c
+++ b/arch/powerpc/platforms/85xx/sbc8560.c
@@ -156,7 +156,7 @@ static void __init init_ioports(void)
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(sbc8560_pins); i++) {
-		struct cpm_pin *pin = &sbc8560_pins[i];
+		const struct cpm_pin *pin = &sbc8560_pins[i];
 		cpm2_set_pin(pin->port, pin->pin, pin->flags);
 	}
 
@@ -200,7 +200,6 @@ static void sbc8560_show_cpuinfo(struct seq_file *m)
 	svid = mfspr(SPRN_SVR);
 
 	seq_printf(m, "Vendor\t\t: Wind River\n");
-	seq_printf(m, "Machine\t\t: SBC8560\n");
 	seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
 	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
 
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 9355a5269431..77dd797a2580 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -31,6 +31,13 @@ config MPC8610_HPCD
 	help
 	  This option enables support for the MPC8610 HPCD board.
 
+config GEF_SBC610
+	bool "GE Fanuc SBC610"
+	select DEFAULT_UIMAGE
+	select HAS_RAPIDIO
+	help
+	  This option enables support for GE Fanuc's SBC610.
+
 endif
 
 config MPC8641
@@ -39,7 +46,7 @@ config MPC8641
 	select FSL_PCI if PCI
 	select PPC_UDBG_16550
 	select MPIC
-	default y if MPC8641_HPCN || SBC8641D
+	default y if MPC8641_HPCN || SBC8641D || GEF_SBC610
 
 config MPC8610
 	bool
diff --git a/arch/powerpc/platforms/86xx/Makefile b/arch/powerpc/platforms/86xx/Makefile
index 8fee37dec795..4a56ff619afd 100644
--- a/arch/powerpc/platforms/86xx/Makefile
+++ b/arch/powerpc/platforms/86xx/Makefile
@@ -7,3 +7,4 @@ obj-$(CONFIG_SMP)		+= mpc86xx_smp.o
 obj-$(CONFIG_MPC8641_HPCN)	+= mpc86xx_hpcn.o
 obj-$(CONFIG_SBC8641D)		+= sbc8641d.o
 obj-$(CONFIG_MPC8610_HPCD)	+= mpc8610_hpcd.o
+obj-$(CONFIG_GEF_SBC610)	+= gef_sbc610.o gef_pic.o
diff --git a/arch/powerpc/platforms/86xx/gef_pic.c b/arch/powerpc/platforms/86xx/gef_pic.c
new file mode 100644
index 000000000000..50d0a2b63809
--- /dev/null
+++ b/arch/powerpc/platforms/86xx/gef_pic.c
@@ -0,0 +1,258 @@
+/*
+ * Interrupt handling for GE Fanuc's FPGA based PIC
+ *
+ * Author: Martyn Welch <martyn.welch@gefanuc.com>
+ *
+ * 2008 (c) GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/irq.h>
+
+#include "gef_pic.h"
+
+#define DEBUG
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(fmt...) do { printk(KERN_DEBUG "gef_pic: " fmt); } while (0)
+#else
+#define DBG(fmt...) do { } while (0)
+#endif
+
+#define GEF_PIC_NUM_IRQS	32
+
+/* Interrupt Controller Interface Registers */
+#define GEF_PIC_INTR_STATUS	0x0000
+
+#define GEF_PIC_INTR_MASK(cpu)	(0x0010 + (0x4 * cpu))
+#define GEF_PIC_CPU0_INTR_MASK	GEF_PIC_INTR_MASK(0)
+#define GEF_PIC_CPU1_INTR_MASK	GEF_PIC_INTR_MASK(1)
+
+#define GEF_PIC_MCP_MASK(cpu)	(0x0018 + (0x4 * cpu))
+#define GEF_PIC_CPU0_MCP_MASK	GEF_PIC_MCP_MASK(0)
+#define GEF_PIC_CPU1_MCP_MASK	GEF_PIC_MCP_MASK(1)
+
+#define gef_irq_to_hw(virq)    ((unsigned int)irq_map[virq].hwirq)
+
+
+static DEFINE_SPINLOCK(gef_pic_lock);
+
+static void __iomem *gef_pic_irq_reg_base;
+static struct irq_host *gef_pic_irq_host;
+static int gef_pic_cascade_irq;
+
+/*
+ * Interrupt Controller Handling
+ *
+ * The interrupt controller handles interrupts for most on board interrupts,
+ * apart from PCI interrupts. For example on SBC610:
+ *
+ * 17:31 RO Reserved
+ * 16    RO PCI Express Doorbell 3 Status
+ * 15    RO PCI Express Doorbell 2 Status
+ * 14    RO PCI Express Doorbell 1 Status
+ * 13    RO PCI Express Doorbell 0 Status
+ * 12    RO Real Time Clock Interrupt Status
+ * 11    RO Temperature Interrupt Status
+ * 10    RO Temperature Critical Interrupt Status
+ * 9     RO Ethernet PHY1 Interrupt Status
+ * 8     RO Ethernet PHY3 Interrupt Status
+ * 7     RO PEX8548 Interrupt Status
+ * 6     RO Reserved
+ * 5     RO Watchdog 0 Interrupt Status
+ * 4     RO Watchdog 1 Interrupt Status
+ * 3     RO AXIS Message FIFO A Interrupt Status
+ * 2     RO AXIS Message FIFO B Interrupt Status
+ * 1     RO AXIS Message FIFO C Interrupt Status
+ * 0     RO AXIS Message FIFO D Interrupt Status
+ *
+ * Interrupts can be forwarded to one of two output lines. Nothing
+ * clever is done, so if the masks are incorrectly set, a single input
+ * interrupt could generate interrupts on both output lines!
+ *
+ * The dual lines are there to allow the chained interrupts to be easily
+ * passed into two different cores. We currently do not use this functionality
+ * in this driver.
+ *
+ * Controller can also be configured to generate Machine checks (MCP), again on
+ * two lines, to be attached to two different cores. It is suggested that these
+ * should be masked out.
+ */
+
+void gef_pic_cascade(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned int cascade_irq;
+
+	/*
+	 * See if we actually have an interrupt, call generic handling code if
+	 * we do.
+	 */
+	cascade_irq = gef_pic_get_irq();
+
+	if (cascade_irq != NO_IRQ)
+		generic_handle_irq(cascade_irq);
+
+	desc->chip->eoi(irq);
+
+}
+
+static void gef_pic_mask(unsigned int virq)
+{
+	unsigned long flags;
+	unsigned int hwirq;
+	u32 mask;
+
+	hwirq = gef_irq_to_hw(virq);
+
+	spin_lock_irqsave(&gef_pic_lock, flags);
+	mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0));
+	mask &= ~(1 << hwirq);
+	out_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0), mask);
+	spin_unlock_irqrestore(&gef_pic_lock, flags);
+}
+
+static void gef_pic_mask_ack(unsigned int virq)
+{
+	/* Don't think we actually have to do anything to ack an interrupt,
+	 * we just need to clear down the devices interrupt and it will go away
+	 */
+	gef_pic_mask(virq);
+}
+
+static void gef_pic_unmask(unsigned int virq)
+{
+	unsigned long flags;
+	unsigned int hwirq;
+	u32 mask;
+
+	hwirq = gef_irq_to_hw(virq);
+
+	spin_lock_irqsave(&gef_pic_lock, flags);
+	mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0));
+	mask |= (1 << hwirq);
+	out_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0), mask);
+	spin_unlock_irqrestore(&gef_pic_lock, flags);
+}
+
+static struct irq_chip gef_pic_chip = {
+	.typename	= "gefp",
+	.mask		= gef_pic_mask,
+	.mask_ack	= gef_pic_mask_ack,
+	.unmask		= gef_pic_unmask,
+};
+
+
+/* When an interrupt is being configured, this call allows some flexibilty
+ * in deciding which irq_chip structure is used
+ */
+static int gef_pic_host_map(struct irq_host *h, unsigned int virq,
+			  irq_hw_number_t hwirq)
+{
+	/* All interrupts are LEVEL sensitive */
+	get_irq_desc(virq)->status |= IRQ_LEVEL;
+	set_irq_chip_and_handler(virq, &gef_pic_chip, handle_level_irq);
+
+	return 0;
+}
+
+static int gef_pic_host_xlate(struct irq_host *h, struct device_node *ct,
+			    u32 *intspec, unsigned int intsize,
+			    irq_hw_number_t *out_hwirq, unsigned int *out_flags)
+{
+
+	*out_hwirq = intspec[0];
+	if (intsize > 1)
+		*out_flags = intspec[1];
+	else
+		*out_flags = IRQ_TYPE_LEVEL_HIGH;
+
+	return 0;
+}
+
+static struct irq_host_ops gef_pic_host_ops = {
+	.map	= gef_pic_host_map,
+	.xlate	= gef_pic_host_xlate,
+};
+
+
+/*
+ * Initialisation of PIC, this should be called in BSP
+ */
+void __init gef_pic_init(struct device_node *np)
+{
+	unsigned long flags;
+
+	/* Map the devices registers into memory */
+	gef_pic_irq_reg_base = of_iomap(np, 0);
+
+	spin_lock_irqsave(&gef_pic_lock, flags);
+
+	/* Initialise everything as masked. */
+	out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU0_INTR_MASK, 0);
+	out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU1_INTR_MASK, 0);
+
+	out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU0_MCP_MASK, 0);
+	out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU1_MCP_MASK, 0);
+
+	spin_unlock_irqrestore(&gef_pic_lock, flags);
+
+	/* Map controller */
+	gef_pic_cascade_irq = irq_of_parse_and_map(np, 0);
+	if (gef_pic_cascade_irq == NO_IRQ) {
+		printk(KERN_ERR "SBC610: failed to map cascade interrupt");
+		return;
+	}
+
+	/* Setup an irq_host structure */
+	gef_pic_irq_host = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR,
+					  GEF_PIC_NUM_IRQS,
+					  &gef_pic_host_ops, NO_IRQ);
+	if (gef_pic_irq_host == NULL)
+		return;
+
+	/* Chain with parent controller */
+	set_irq_chained_handler(gef_pic_cascade_irq, gef_pic_cascade);
+}
+
+/*
+ * This is called when we receive an interrupt with apparently comes from this
+ * chip - check, returning the highest interrupt generated or return NO_IRQ
+ */
+unsigned int gef_pic_get_irq(void)
+{
+	u32 cause, mask, active;
+	unsigned int virq = NO_IRQ;
+	int hwirq;
+
+	cause = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_STATUS);
+
+	mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0));
+
+	active = cause & mask;
+
+	if (active) {
+		for (hwirq = GEF_PIC_NUM_IRQS - 1; hwirq > -1; hwirq--) {
+			if (active & (0x1 << hwirq))
+				break;
+		}
+		virq = irq_linear_revmap(gef_pic_irq_host,
+			(irq_hw_number_t)hwirq);
+	}
+
+	return virq;
+}
+
diff --git a/arch/powerpc/platforms/86xx/gef_pic.h b/arch/powerpc/platforms/86xx/gef_pic.h
new file mode 100644
index 000000000000..6149916da3f4
--- /dev/null
+++ b/arch/powerpc/platforms/86xx/gef_pic.h
@@ -0,0 +1,11 @@
+#ifndef __GEF_PIC_H__
+#define __GEF_PIC_H__
+
+#include <linux/init.h>
+
+void gef_pic_cascade(unsigned int, struct irq_desc *);
+unsigned int gef_pic_get_irq(void);
+void gef_pic_init(struct device_node *);
+
+#endif /* __GEF_PIC_H__ */
+
diff --git a/arch/powerpc/platforms/86xx/gef_sbc610.c b/arch/powerpc/platforms/86xx/gef_sbc610.c
new file mode 100644
index 000000000000..821c45fac18b
--- /dev/null
+++ b/arch/powerpc/platforms/86xx/gef_sbc610.c
@@ -0,0 +1,221 @@
+/*
+ * GE Fanuc SBC610 board support
+ *
+ * Author: Martyn Welch <martyn.welch@gefanuc.com>
+ *
+ * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Based on: mpc86xx_hpcn.c (MPC86xx HPCN board specific routines)
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * NEC fixup adapted from arch/mips/pci/fixup-lm2e.c
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/of_platform.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpc86xx.h>
+#include <asm/prom.h>
+#include <mm/mmu_decl.h>
+#include <asm/udbg.h>
+
+#include <asm/mpic.h>
+
+#include <sysdev/fsl_pci.h>
+#include <sysdev/fsl_soc.h>
+
+#include "mpc86xx.h"
+#include "gef_pic.h"
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG (fmt...) do { printk(KERN_ERR "SBC610: " fmt); } while (0)
+#else
+#define DBG (fmt...) do { } while (0)
+#endif
+
+void __iomem *sbc610_regs;
+
+static void __init gef_sbc610_init_irq(void)
+{
+	struct device_node *cascade_node = NULL;
+
+	mpc86xx_init_irq();
+
+	/*
+	 * There is a simple interrupt handler in the main FPGA, this needs
+	 * to be cascaded into the MPIC
+	 */
+	cascade_node = of_find_compatible_node(NULL, NULL, "gef,fpga-pic");
+	if (!cascade_node) {
+		printk(KERN_WARNING "SBC610: No FPGA PIC\n");
+		return;
+	}
+
+	gef_pic_init(cascade_node);
+	of_node_put(cascade_node);
+}
+
+static void __init gef_sbc610_setup_arch(void)
+{
+	struct device_node *regs;
+#ifdef CONFIG_PCI
+	struct device_node *np;
+
+	for_each_compatible_node(np, "pci", "fsl,mpc8641-pcie") {
+		fsl_add_bridge(np, 1);
+	}
+#endif
+
+	printk(KERN_INFO "GE Fanuc Intelligent Platforms SBC610 6U VPX SBC\n");
+
+#ifdef CONFIG_SMP
+	mpc86xx_smp_init();
+#endif
+
+	/* Remap basic board registers */
+	regs = of_find_compatible_node(NULL, NULL, "gef,fpga-regs");
+	if (regs) {
+		sbc610_regs = of_iomap(regs, 0);
+		if (sbc610_regs == NULL)
+			printk(KERN_WARNING "Unable to map board registers\n");
+		of_node_put(regs);
+	}
+}
+
+/* Return the PCB revision */
+static unsigned int gef_sbc610_get_pcb_rev(void)
+{
+	unsigned int reg;
+
+	reg = ioread32(sbc610_regs);
+	return (reg >> 8) & 0xff;
+}
+
+/* Return the board (software) revision */
+static unsigned int gef_sbc610_get_board_rev(void)
+{
+	unsigned int reg;
+
+	reg = ioread32(sbc610_regs);
+	return (reg >> 16) & 0xff;
+}
+
+/* Return the FPGA revision */
+static unsigned int gef_sbc610_get_fpga_rev(void)
+{
+	unsigned int reg;
+
+	reg = ioread32(sbc610_regs);
+	return (reg >> 24) & 0xf;
+}
+
+static void gef_sbc610_show_cpuinfo(struct seq_file *m)
+{
+	uint memsize = total_memory;
+	uint svid = mfspr(SPRN_SVR);
+
+	seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n");
+
+	seq_printf(m, "Revision\t: %u%c\n", gef_sbc610_get_pcb_rev(),
+		('A' + gef_sbc610_get_board_rev() - 1));
+	seq_printf(m, "FPGA Revision\t: %u\n", gef_sbc610_get_fpga_rev());
+
+	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
+}
+
+static void __init gef_sbc610_nec_fixup(struct pci_dev *pdev)
+{
+	unsigned int val;
+
+	printk(KERN_INFO "Running NEC uPD720101 Fixup\n");
+
+	/* Ensure ports 1, 2, 3, 4 & 5 are enabled */
+	pci_read_config_dword(pdev, 0xe0, &val);
+	pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x5);
+
+	/* System clock is 48-MHz Oscillator and EHCI Enabled. */
+	pci_write_config_dword(pdev, 0xe4, 1 << 5);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
+	gef_sbc610_nec_fixup);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ *
+ * This function is called to determine whether the BSP is compatible with the
+ * supplied device-tree, which is assumed to be the correct one for the actual
+ * board. It is expected thati, in the future, a kernel may support multiple
+ * boards.
+ */
+static int __init gef_sbc610_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (of_flat_dt_is_compatible(root, "gef,sbc610"))
+		return 1;
+
+	return 0;
+}
+
+static long __init mpc86xx_time_init(void)
+{
+	unsigned int temp;
+
+	/* Set the time base to zero */
+	mtspr(SPRN_TBWL, 0);
+	mtspr(SPRN_TBWU, 0);
+
+	temp = mfspr(SPRN_HID0);
+	temp |= HID0_TBEN;
+	mtspr(SPRN_HID0, temp);
+	asm volatile("isync");
+
+	return 0;
+}
+
+static __initdata struct of_device_id of_bus_ids[] = {
+	{ .compatible = "simple-bus", },
+	{},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+	printk(KERN_DEBUG "Probe platform devices\n");
+	of_platform_bus_probe(NULL, of_bus_ids, NULL);
+
+	return 0;
+}
+machine_device_initcall(gef_sbc610, declare_of_platform_devices);
+
+define_machine(gef_sbc610) {
+	.name			= "GE Fanuc SBC610",
+	.probe			= gef_sbc610_probe,
+	.setup_arch		= gef_sbc610_setup_arch,
+	.init_IRQ		= gef_sbc610_init_irq,
+	.show_cpuinfo		= gef_sbc610_show_cpuinfo,
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.time_init		= mpc86xx_time_init,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+};
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index 5eedb710896e..e8d54ac5292c 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -238,7 +238,6 @@ static void __init mpc86xx_hpcd_setup_arch(void)
         }
 #endif
 #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
-	preallocate_diu_videomemory();
 	diu_ops.get_pixel_format	= mpc8610hpcd_get_pixel_format;
 	diu_ops.set_gamma_table		= mpc8610hpcd_set_gamma_table;
 	diu_ops.set_monitor_port	= mpc8610hpcd_set_monitor_port;
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index f712d9c0991b..2672829a71dc 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -101,19 +101,11 @@ mpc86xx_hpcn_setup_arch(void)
 static void
 mpc86xx_hpcn_show_cpuinfo(struct seq_file *m)
 {
-	struct device_node *root;
 	uint memsize = total_memory;
-	const char *model = "";
 	uint svid = mfspr(SPRN_SVR);
 
 	seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
 
-	root = of_find_node_by_path("/");
-	if (root)
-		model = of_get_property(root, "model", NULL);
-	seq_printf(m, "Machine\t\t: %s\n", model);
-	of_node_put(root);
-
 	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
 	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
 }
diff --git a/arch/powerpc/platforms/86xx/sbc8641d.c b/arch/powerpc/platforms/86xx/sbc8641d.c
index 00e6fad3b3ca..da677a74e2d1 100644
--- a/arch/powerpc/platforms/86xx/sbc8641d.c
+++ b/arch/powerpc/platforms/86xx/sbc8641d.c
@@ -63,19 +63,11 @@ sbc8641_setup_arch(void)
 static void
 sbc8641_show_cpuinfo(struct seq_file *m)
 {
-	struct device_node *root;
 	uint memsize = total_memory;
-	const char *model = "";
 	uint svid = mfspr(SPRN_SVR);
 
 	seq_printf(m, "Vendor\t\t: Wind River Systems\n");
 
-	root = of_find_node_by_path("/");
-	if (root)
-		model = of_get_property(root, "model", NULL);
-	seq_printf(m, "Machine\t\t: %s\n", model);
-	of_node_put(root);
-
 	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
 	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
 }
diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig
index 71d7562e190b..48a920a98e7b 100644
--- a/arch/powerpc/platforms/8xx/Kconfig
+++ b/arch/powerpc/platforms/8xx/Kconfig
@@ -49,6 +49,12 @@ config PPC_ADDER875
 	  This enables support for the Analogue & Micro Adder 875
 	  board.
 
+config PPC_MGSUVD
+	bool "MGSUVD"
+	select CPM1
+	help
+	  This enables support for the Keymile MGSUVD board.
+
 endchoice
 
 menu "Freescale Ethernet driver platform-specific options"
diff --git a/arch/powerpc/platforms/8xx/Makefile b/arch/powerpc/platforms/8xx/Makefile
index 7b71d9c8fb45..bdbfd7496018 100644
--- a/arch/powerpc/platforms/8xx/Makefile
+++ b/arch/powerpc/platforms/8xx/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_MPC885ADS)   += mpc885ads_setup.o
 obj-$(CONFIG_MPC86XADS)   += mpc86xads_setup.o
 obj-$(CONFIG_PPC_EP88XC)  += ep88xc.o
 obj-$(CONFIG_PPC_ADDER875) += adder875.o
+obj-$(CONFIG_PPC_MGSUVD) += mgsuvd.o
diff --git a/arch/powerpc/platforms/8xx/mgsuvd.c b/arch/powerpc/platforms/8xx/mgsuvd.c
new file mode 100644
index 000000000000..ca3cb071772c
--- /dev/null
+++ b/arch/powerpc/platforms/8xx/mgsuvd.c
@@ -0,0 +1,92 @@
+/*
+ *
+ * Platform setup for the Keymile mgsuvd board
+ *
+ * Heiko Schocher <hs@denx.de>
+ *
+ * Copyright 2008 DENX Software Engineering GmbH
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/ioport.h>
+#include <linux/of_platform.h>
+
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/processor.h>
+#include <asm/cpm1.h>
+#include <asm/prom.h>
+#include <asm/fs_pd.h>
+
+#include "mpc8xx.h"
+
+struct cpm_pin {
+	int port, pin, flags;
+};
+
+static __initdata struct cpm_pin mgsuvd_pins[] = {
+	/* SMC1 */
+	{CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */
+	{CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
+
+	/* SCC3 */
+	{CPM_PORTA, 10, CPM_PIN_INPUT},
+	{CPM_PORTA, 11, CPM_PIN_INPUT},
+	{CPM_PORTA, 3, CPM_PIN_INPUT},
+	{CPM_PORTA, 2, CPM_PIN_INPUT},
+	{CPM_PORTC, 13, CPM_PIN_INPUT},
+};
+
+static void __init init_ioports(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(mgsuvd_pins); i++) {
+		struct cpm_pin *pin = &mgsuvd_pins[i];
+		cpm1_set_pin(pin->port, pin->pin, pin->flags);
+	}
+
+	setbits16(&mpc8xx_immr->im_ioport.iop_pcso, 0x300);
+	cpm1_clk_setup(CPM_CLK_SCC3, CPM_CLK5, CPM_CLK_RX);
+	cpm1_clk_setup(CPM_CLK_SCC3, CPM_CLK6, CPM_CLK_TX);
+	cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX);
+}
+
+static void __init mgsuvd_setup_arch(void)
+{
+	cpm_reset();
+	init_ioports();
+}
+
+static __initdata struct of_device_id of_bus_ids[] = {
+	{ .compatible = "simple-bus" },
+	{},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+	of_platform_bus_probe(NULL, of_bus_ids, NULL);
+	return 0;
+}
+machine_device_initcall(mgsuvd, declare_of_platform_devices);
+
+static int __init mgsuvd_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+	return of_flat_dt_is_compatible(root, "keymile,mgsuvd");
+}
+
+define_machine(mgsuvd) {
+	.name           = "MGSUVD",
+	.probe          = mgsuvd_probe,
+	.setup_arch     = mgsuvd_setup_arch,
+	.init_IRQ       = mpc8xx_pics_init,
+	.get_irq        = mpc8xx_get_irq,
+	.restart        = mpc8xx_restart,
+	.calibrate_decr = mpc8xx_calibrate_decr,
+	.set_rtc_time   = mpc8xx_set_rtc_time,
+	.get_rtc_time   = mpc8xx_get_rtc_time,
+};
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 4c900efa164e..47e956c871fe 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -239,7 +239,8 @@ config TAU_AVERAGE
 	  If in doubt, say N here.
 
 config QUICC_ENGINE
-	bool
+	bool "Freescale QUICC Engine (QE) Support"
+	depends on FSL_SOC
 	select PPC_LIB_RHEAP
 	select CRC32
 	help
@@ -248,6 +249,15 @@ config QUICC_ENGINE
 	  Selecting this option means that you wish to build a kernel
 	  for a machine with a QE coprocessor.
 
+config QE_GPIO
+	bool "QE GPIO support"
+	depends on QUICC_ENGINE
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	  Say Y here if you're going to use hardware that connects to the
+	  QE GPIOs.
+
 config CPM2
 	bool "Enable support for the CPM2 (Communications Processor Module)"
 	depends on MPC85xx || 8260
@@ -293,4 +303,13 @@ config OF_RTC
 
 source "arch/powerpc/sysdev/bestcomm/Kconfig"
 
+config MPC8xxx_GPIO
+	bool "MPC8xxx GPIO support"
+	depends on PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || PPC_85xx || PPC_86xx
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	  Say Y here if you're going to use hardware that connects to the
+	  MPC831x/834x/837x/8572/8610 GPIOs.
+
 endmenu
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 7f6512733862..548efa55c8fe 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -50,6 +50,7 @@ config 44x
 	select PPC_UDBG_16550
 	select 4xx_SOC
 	select PPC_PCI_CHOICE
+	select PHYS_64BIT
 
 config E200
 	bool "Freescale e200"
@@ -128,18 +129,19 @@ config FSL_EMB_PERFMON
 
 config PTE_64BIT
 	bool
-	depends on 44x || E500
-	default y if 44x
-	default y if E500 && PHYS_64BIT
+	depends on 44x || E500 || PPC_86xx
+	default y if PHYS_64BIT
 
 config PHYS_64BIT
-	bool 'Large physical address support' if E500
-	depends on 44x || E500
-	select RESOURCES_64BIT
-	default y if 44x
+	bool 'Large physical address support' if E500 || PPC_86xx
+	depends on (44x || E500 || PPC_86xx) && !PPC_83xx && !PPC_82xx
 	---help---
 	  This option enables kernel support for larger than 32-bit physical
-	  addresses.  This features is not be available on all e500 cores.
+	  addresses.  This feature may not be available on all cores.
+
+	  If you have more than 3.5GB of RAM or so, you also need to enable
+	  SWIOTLB under Kernel Options for this to work.  The actual number
+	  is platform-dependent.
 
 	  If in doubt, say N here.
 
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index e06420af5fe9..ef92e7146215 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -556,11 +556,11 @@ static struct iommu_table *cell_get_iommu_table(struct device *dev)
 	 * node's iommu. We -might- do something smarter later though it may
 	 * never be necessary
 	 */
-	iommu = cell_iommu_for_node(archdata->numa_node);
+	iommu = cell_iommu_for_node(dev_to_node(dev));
 	if (iommu == NULL || list_empty(&iommu->windows)) {
 		printk(KERN_ERR "iommu: missing iommu for %s (node %d)\n",
 		       archdata->of_node ? archdata->of_node->full_name : "?",
-		       archdata->numa_node);
+		       dev_to_node(dev));
 		return NULL;
 	}
 	window = list_entry(iommu->windows.next, struct iommu_window, list);
@@ -577,7 +577,7 @@ static void *dma_fixed_alloc_coherent(struct device *dev, size_t size,
 		return iommu_alloc_coherent(dev, cell_get_iommu_table(dev),
 					    size, dma_handle,
 					    device_to_mask(dev), flag,
-					    dev->archdata.numa_node);
+					    dev_to_node(dev));
 	else
 		return dma_direct_ops.alloc_coherent(dev, size, dma_handle,
 						     flag);
diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c
index 690ca7b0dcf6..cb85d237e492 100644
--- a/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@@ -298,8 +298,8 @@ spufs_mkdir(struct inode *dir, struct dentry *dentry, unsigned int flags,
 
 	d_instantiate(dentry, inode);
 	dget(dentry);
-	dir->i_nlink++;
-	dentry->d_inode->i_nlink++;
+	inc_nlink(dir);
+	inc_nlink(dentry->d_inode);
 	goto out;
 
 out_free_ctx:
@@ -496,6 +496,8 @@ spufs_create_context(struct inode *inode, struct dentry *dentry,
 	ret = spufs_context_open(dget(dentry), mntget(mnt));
 	if (ret < 0) {
 		WARN_ON(spufs_rmdir(inode, dentry));
+		if (affinity)
+			mutex_unlock(&gang->aff_mutex);
 		mutex_unlock(&inode->i_mutex);
 		spu_forget(SPUFS_I(dentry->d_inode)->i_ctx);
 		goto out;
@@ -538,8 +540,8 @@ spufs_mkgang(struct inode *dir, struct dentry *dentry, int mode)
 	inode->i_fop = &simple_dir_operations;
 
 	d_instantiate(dentry, inode);
-	dir->i_nlink++;
-	dentry->d_inode->i_nlink++;
+	inc_nlink(dir);
+	inc_nlink(dentry->d_inode);
 	return ret;
 
 out_iput:
@@ -659,7 +661,7 @@ enum {
 	Opt_uid, Opt_gid, Opt_mode, Opt_debug, Opt_err,
 };
 
-static match_table_t spufs_tokens = {
+static const match_table_t spufs_tokens = {
 	{ Opt_uid,   "uid=%d" },
 	{ Opt_gid,   "gid=%d" },
 	{ Opt_mode,  "mode=%o" },
@@ -755,6 +757,7 @@ spufs_create_root(struct super_block *sb, void *data)
 	inode->i_op = &simple_dir_inode_operations;
 	inode->i_fop = &simple_dir_operations;
 	SPUFS_I(inode)->i_ctx = NULL;
+	inc_nlink(inode);
 
 	ret = -EINVAL;
 	if (!spufs_parse_options(sb, data, inode))
diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index 1c1b627ee843..67595bc380dc 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -643,9 +643,10 @@ static struct spu *find_victim(struct spu_context *ctx)
 			    !(tmp->flags & SPU_CREATE_NOSCHED) &&
 			    (!victim || tmp->prio > victim->prio)) {
 				victim = spu->ctx;
-				get_spu_context(victim);
 			}
 		}
+		if (victim)
+			get_spu_context(victim);
 		mutex_unlock(&cbe_spu_info[node].list_mutex);
 
 		if (victim) {
@@ -727,17 +728,33 @@ static void spu_schedule(struct spu *spu, struct spu_context *ctx)
 	/* not a candidate for interruptible because it's called either
 	   from the scheduler thread or from spu_deactivate */
 	mutex_lock(&ctx->state_mutex);
-	__spu_schedule(spu, ctx);
+	if (ctx->state == SPU_STATE_SAVED)
+		__spu_schedule(spu, ctx);
 	spu_release(ctx);
 }
 
-static void spu_unschedule(struct spu *spu, struct spu_context *ctx)
+/**
+ * spu_unschedule - remove a context from a spu, and possibly release it.
+ * @spu:	The SPU to unschedule from
+ * @ctx:	The context currently scheduled on the SPU
+ * @free_spu	Whether to free the SPU for other contexts
+ *
+ * Unbinds the context @ctx from the SPU @spu. If @free_spu is non-zero, the
+ * SPU is made available for other contexts (ie, may be returned by
+ * spu_get_idle). If this is zero, the caller is expected to schedule another
+ * context to this spu.
+ *
+ * Should be called with ctx->state_mutex held.
+ */
+static void spu_unschedule(struct spu *spu, struct spu_context *ctx,
+		int free_spu)
 {
 	int node = spu->node;
 
 	mutex_lock(&cbe_spu_info[node].list_mutex);
 	cbe_spu_info[node].nr_active--;
-	spu->alloc_state = SPU_FREE;
+	if (free_spu)
+		spu->alloc_state = SPU_FREE;
 	spu_unbind_context(spu, ctx);
 	ctx->stats.invol_ctx_switch++;
 	spu->stats.invol_ctx_switch++;
@@ -837,7 +854,7 @@ static int __spu_deactivate(struct spu_context *ctx, int force, int max_prio)
 	if (spu) {
 		new = grab_runnable_context(max_prio, spu->node);
 		if (new || force) {
-			spu_unschedule(spu, ctx);
+			spu_unschedule(spu, ctx, new == NULL);
 			if (new) {
 				if (new->flags & SPU_CREATE_NOSCHED)
 					wake_up(&new->stop_wq);
@@ -910,7 +927,7 @@ static noinline void spusched_tick(struct spu_context *ctx)
 
 	new = grab_runnable_context(ctx->prio + 1, spu->node);
 	if (new) {
-		spu_unschedule(spu, ctx);
+		spu_unschedule(spu, ctx, 0);
 		if (test_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags))
 			spu_add_to_rq(ctx);
 	} else {
diff --git a/arch/powerpc/platforms/chrp/pci.c b/arch/powerpc/platforms/chrp/pci.c
index 768c262b9368..d3cde6b9d2df 100644
--- a/arch/powerpc/platforms/chrp/pci.c
+++ b/arch/powerpc/platforms/chrp/pci.c
@@ -260,13 +260,13 @@ chrp_find_bridges(void)
 				dev->full_name);
 			continue;
 		}
-		hose->first_busno = bus_range[0];
+		hose->first_busno = hose->self_busno = bus_range[0];
 		hose->last_busno = bus_range[1];
 
 		model = of_get_property(dev, "model", NULL);
 		if (model == NULL)
 			model = "<none>";
-		if (of_device_is_compatible(dev, "IBM,python")) {
+		if (strncmp(model, "IBM, Python", 11) == 0) {
 			setup_python(hose, dev);
 		} else if (is_mot
 			   || strncmp(model, "Motorola, Grackle", 17) == 0) {
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index 1ba7ce5aafae..272d79a8d289 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -17,7 +17,6 @@
 #include <linux/ptrace.h>
 #include <linux/slab.h>
 #include <linux/user.h>
-#include <linux/a.out.h>
 #include <linux/tty.h>
 #include <linux/major.h>
 #include <linux/interrupt.h>
diff --git a/arch/powerpc/platforms/chrp/time.c b/arch/powerpc/platforms/chrp/time.c
index 96d1e4b3c493..054dfe5b8e77 100644
--- a/arch/powerpc/platforms/chrp/time.c
+++ b/arch/powerpc/platforms/chrp/time.c
@@ -94,12 +94,12 @@ int chrp_set_rtc_time(struct rtc_time *tmarg)
 	chrp_cmos_clock_write((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
 
 	if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-		BIN_TO_BCD(tm.tm_sec);
-		BIN_TO_BCD(tm.tm_min);
-		BIN_TO_BCD(tm.tm_hour);
-		BIN_TO_BCD(tm.tm_mon);
-		BIN_TO_BCD(tm.tm_mday);
-		BIN_TO_BCD(tm.tm_year);
+		tm.tm_sec = bin2bcd(tm.tm_sec);
+		tm.tm_min = bin2bcd(tm.tm_min);
+		tm.tm_hour = bin2bcd(tm.tm_hour);
+		tm.tm_mon = bin2bcd(tm.tm_mon);
+		tm.tm_mday = bin2bcd(tm.tm_mday);
+		tm.tm_year = bin2bcd(tm.tm_year);
 	}
 	chrp_cmos_clock_write(tm.tm_sec,RTC_SECONDS);
 	chrp_cmos_clock_write(tm.tm_min,RTC_MINUTES);
@@ -136,12 +136,12 @@ void chrp_get_rtc_time(struct rtc_time *tm)
 	} while (sec != chrp_cmos_clock_read(RTC_SECONDS));
 
 	if (!(chrp_cmos_clock_read(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-		BCD_TO_BIN(sec);
-		BCD_TO_BIN(min);
-		BCD_TO_BIN(hour);
-		BCD_TO_BIN(day);
-		BCD_TO_BIN(mon);
-		BCD_TO_BIN(year);
+		sec = bcd2bin(sec);
+		min = bcd2bin(min);
+		hour = bcd2bin(hour);
+		day = bcd2bin(day);
+		mon = bcd2bin(mon);
+		year = bcd2bin(year);
 	}
 	if (year < 70)
 		year += 100;
diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
index 84e2d78b9a62..7a2ba39d7811 100644
--- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
+++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
@@ -164,7 +164,6 @@ static void __init mpc7448_hpc2_init_IRQ(void)
 void mpc7448_hpc2_show_cpuinfo(struct seq_file *m)
 {
 	seq_printf(m, "vendor\t\t: Freescale Semiconductor\n");
-	seq_printf(m, "machine\t\t: MPC7448hpc2\n");
 }
 
 void mpc7448_hpc2_restart(char *cmd)
diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c
index ef74a0763ec1..8c619963becc 100644
--- a/arch/powerpc/platforms/fsl_uli1575.c
+++ b/arch/powerpc/platforms/fsl_uli1575.c
@@ -219,11 +219,21 @@ static void __devinit quirk_final_uli5249(struct pci_dev *dev)
 	int i;
 	u8 *dummy;
 	struct pci_bus *bus = dev->bus;
+	resource_size_t end = 0;
+
+	for (i = PCI_BRIDGE_RESOURCES; i < PCI_BRIDGE_RESOURCES+3; i++) {
+		unsigned long flags = pci_resource_flags(dev, i);
+		if ((flags & (IORESOURCE_MEM|IORESOURCE_PREFETCH)) == IORESOURCE_MEM)
+			end = pci_resource_end(dev, i);
+	}
 
 	for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
 		if ((bus->resource[i]) &&
 			(bus->resource[i]->flags & IORESOURCE_MEM)) {
-			dummy = ioremap(bus->resource[i]->end - 3, 0x4);
+			if (bus->resource[i]->end == end)
+				dummy = ioremap(bus->resource[i]->start, 0x4);
+			else
+				dummy = ioremap(bus->resource[i]->end - 3, 0x4);
 			if (dummy) {
 				in_8(dummy);
 				iounmap(dummy);
diff --git a/arch/powerpc/platforms/iseries/exception.S b/arch/powerpc/platforms/iseries/exception.S
index 8ff330d026ca..2f581521eb9b 100644
--- a/arch/powerpc/platforms/iseries/exception.S
+++ b/arch/powerpc/platforms/iseries/exception.S
@@ -38,12 +38,13 @@
 
 	.globl system_reset_iSeries
 system_reset_iSeries:
+	bl	.relative_toc
 	mfspr	r13,SPRN_SPRG3		/* Get alpaca address */
-	LOAD_REG_IMMEDIATE(r23, alpaca)
+	LOAD_REG_ADDR(r23, alpaca)
 	li	r0,ALPACA_SIZE
 	sub	r23,r13,r23
 	divdu	r23,r23,r0		/* r23 has cpu number */
-	LOAD_REG_IMMEDIATE(r13, paca)
+	LOAD_REG_ADDR(r13, paca)
 	mulli	r0,r23,PACA_SIZE
 	add	r13,r13,r0
 	mtspr	SPRN_SPRG3,r13		/* Save it away for the future */
@@ -60,14 +61,14 @@ system_reset_iSeries:
 	mtspr	SPRN_CTRLT,r4
 
 /* Spin on __secondary_hold_spinloop until it is updated by the boot cpu. */
-/* In the UP case we'll yeild() later, and we will not access the paca anyway */
+/* In the UP case we'll yield() later, and we will not access the paca anyway */
 #ifdef CONFIG_SMP
 1:
 	HMT_LOW
-	LOAD_REG_IMMEDIATE(r23, __secondary_hold_spinloop)
+	LOAD_REG_ADDR(r23, __secondary_hold_spinloop)
 	ld	r23,0(r23)
 	sync
-	LOAD_REG_IMMEDIATE(r3,current_set)
+	LOAD_REG_ADDR(r3,current_set)
 	sldi	r28,r24,3		/* get current_set[cpu#] */
 	ldx	r3,r3,r28
 	addi	r1,r3,THREAD_SIZE
@@ -90,7 +91,7 @@ system_reset_iSeries:
 	lbz	r23,PACAPROCSTART(r13)	/* Test if this processor
 					 * should start */
 	sync
-	LOAD_REG_IMMEDIATE(r3,current_set)
+	LOAD_REG_ADDR(r3,current_set)
 	sldi	r28,r24,3		/* get current_set[cpu#] */
 	ldx	r3,r3,r28
 	addi	r1,r3,THREAD_SIZE
@@ -255,8 +256,8 @@ hardware_interrupt_iSeries_masked:
 
 _INIT_STATIC(__start_initialization_iSeries)
 	/* Clear out the BSS */
-	LOAD_REG_IMMEDIATE(r11,__bss_stop)
-	LOAD_REG_IMMEDIATE(r8,__bss_start)
+	LOAD_REG_ADDR(r11,__bss_stop)
+	LOAD_REG_ADDR(r8,__bss_start)
 	sub	r11,r11,r8		/* bss size			*/
 	addi	r11,r11,7		/* round up to an even double word */
 	rldicl. r11,r11,61,3		/* shift right by 3		*/
@@ -267,15 +268,11 @@ _INIT_STATIC(__start_initialization_iSeries)
 3:	stdu	r0,8(r8)
 	bdnz	3b
 4:
-	LOAD_REG_IMMEDIATE(r1,init_thread_union)
+	LOAD_REG_ADDR(r1,init_thread_union)
 	addi	r1,r1,THREAD_SIZE
 	li	r0,0
 	stdu	r0,-STACK_FRAME_OVERHEAD(r1)
 
-	LOAD_REG_IMMEDIATE(r2,__toc_start)
-	addi	r2,r2,0x4000
-	addi	r2,r2,0x4000
-
 	bl	.iSeries_early_setup
 	bl	.early_setup
 
diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c
index 731d7b157749..3689c2413d24 100644
--- a/arch/powerpc/platforms/iseries/mf.c
+++ b/arch/powerpc/platforms/iseries/mf.c
@@ -722,13 +722,13 @@ static int mf_set_rtc(struct rtc_time *tm)
 	day = tm->tm_mday;
 	mon = tm->tm_mon + 1;
 
-	BIN_TO_BCD(sec);
-	BIN_TO_BCD(min);
-	BIN_TO_BCD(hour);
-	BIN_TO_BCD(mon);
-	BIN_TO_BCD(day);
-	BIN_TO_BCD(y1);
-	BIN_TO_BCD(y2);
+	sec = bin2bcd(sec);
+	min = bin2bcd(min);
+	hour = bin2bcd(hour);
+	mon = bin2bcd(mon);
+	day = bin2bcd(day);
+	y1 = bin2bcd(y1);
+	y2 = bin2bcd(y2);
 
 	memset(ce_time, 0, sizeof(ce_time));
 	ce_time[3] = 0x41;
@@ -777,12 +777,12 @@ static int rtc_set_tm(int rc, u8 *ce_msg, struct rtc_time *tm)
 		u8 day = ce_msg[10];
 		u8 mon = ce_msg[11];
 
-		BCD_TO_BIN(sec);
-		BCD_TO_BIN(min);
-		BCD_TO_BIN(hour);
-		BCD_TO_BIN(day);
-		BCD_TO_BIN(mon);
-		BCD_TO_BIN(year);
+		sec = bcd2bin(sec);
+		min = bcd2bin(min);
+		hour = bcd2bin(hour);
+		day = bcd2bin(day);
+		mon = bcd2bin(mon);
+		year = bcd2bin(year);
 
 		if (year <= 69)
 			year += 100;
diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c
index 364714757cf1..d4c61c3c9669 100644
--- a/arch/powerpc/platforms/maple/setup.c
+++ b/arch/powerpc/platforms/maple/setup.c
@@ -23,7 +23,6 @@
 #include <linux/ptrace.h>
 #include <linux/slab.h>
 #include <linux/user.h>
-#include <linux/a.out.h>
 #include <linux/tty.h>
 #include <linux/string.h>
 #include <linux/delay.h>
diff --git a/arch/powerpc/platforms/maple/time.c b/arch/powerpc/platforms/maple/time.c
index 53bca132fb48..eac569dee27c 100644
--- a/arch/powerpc/platforms/maple/time.c
+++ b/arch/powerpc/platforms/maple/time.c
@@ -68,12 +68,12 @@ void maple_get_rtc_time(struct rtc_time *tm)
 
 	if (!(maple_clock_read(RTC_CONTROL) & RTC_DM_BINARY)
 	    || RTC_ALWAYS_BCD) {
-		BCD_TO_BIN(tm->tm_sec);
-		BCD_TO_BIN(tm->tm_min);
-		BCD_TO_BIN(tm->tm_hour);
-		BCD_TO_BIN(tm->tm_mday);
-		BCD_TO_BIN(tm->tm_mon);
-		BCD_TO_BIN(tm->tm_year);
+		tm->tm_sec = bcd2bin(tm->tm_sec);
+		tm->tm_min = bcd2bin(tm->tm_min);
+		tm->tm_hour = bcd2bin(tm->tm_hour);
+		tm->tm_mday = bcd2bin(tm->tm_mday);
+		tm->tm_mon = bcd2bin(tm->tm_mon);
+		tm->tm_year = bcd2bin(tm->tm_year);
 	  }
 	if ((tm->tm_year + 1900) < 1970)
 		tm->tm_year += 100;
@@ -104,12 +104,12 @@ int maple_set_rtc_time(struct rtc_time *tm)
 	year = tm->tm_year;
 
 	if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-		BIN_TO_BCD(sec);
-		BIN_TO_BCD(min);
-		BIN_TO_BCD(hour);
-		BIN_TO_BCD(mon);
-		BIN_TO_BCD(mday);
-		BIN_TO_BCD(year);
+		sec = bin2bcd(sec);
+		min = bin2bcd(min);
+		hour = bin2bcd(hour);
+		mon = bin2bcd(mon);
+		mday = bin2bcd(mday);
+		year = bin2bcd(year);
 	}
 	maple_clock_write(sec, RTC_SECONDS);
 	maple_clock_write(min, RTC_MINUTES);
diff --git a/arch/powerpc/platforms/pasemi/gpio_mdio.c b/arch/powerpc/platforms/pasemi/gpio_mdio.c
index ab6955412ba4..75cc165d5bee 100644
--- a/arch/powerpc/platforms/pasemi/gpio_mdio.c
+++ b/arch/powerpc/platforms/pasemi/gpio_mdio.c
@@ -230,7 +230,7 @@ static int __devinit gpio_mdio_probe(struct of_device *ofdev,
 	if (!priv)
 		goto out;
 
-	new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL);
+	new_bus = mdiobus_alloc();
 
 	if (!new_bus)
 		goto out_free_priv;
@@ -272,7 +272,7 @@ static int __devinit gpio_mdio_probe(struct of_device *ofdev,
 	prop = of_get_property(np, "mdio-pin", NULL);
 	priv->mdio_pin = *prop;
 
-	new_bus->dev = dev;
+	new_bus->parent = dev;
 	dev_set_drvdata(dev, new_bus);
 
 	err = mdiobus_register(new_bus);
@@ -306,7 +306,7 @@ static int gpio_mdio_remove(struct of_device *dev)
 
 	kfree(bus->priv);
 	bus->priv = NULL;
-	kfree(bus);
+	mdiobus_free(bus);
 
 	return 0;
 }
diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c
index 5169ecc37123..e6c0040ee797 100644
--- a/arch/powerpc/platforms/powermac/feature.c
+++ b/arch/powerpc/platforms/powermac/feature.c
@@ -2677,7 +2677,7 @@ static void __init probe_one_macio(const char *name, const char *compat, int typ
 	macio_chips[i].of_node	= node;
 	macio_chips[i].type	= type;
 	macio_chips[i].base	= base;
-	macio_chips[i].flags	= MACIO_FLAG_SCCB_ON | MACIO_FLAG_SCCB_ON;
+	macio_chips[i].flags	= MACIO_FLAG_SCCA_ON | MACIO_FLAG_SCCB_ON;
 	macio_chips[i].name	= macio_names[type];
 	revp = of_get_property(node, "revision-id", NULL);
 	if (revp)
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 88ccf3a08a9c..82c14d203d8b 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -33,7 +33,6 @@
 #include <linux/ptrace.h>
 #include <linux/slab.h>
 #include <linux/user.h>
-#include <linux/a.out.h>
 #include <linux/tty.h>
 #include <linux/string.h>
 #include <linux/delay.h>
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index 4ae3d00e0bdd..40f72c2a4699 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -787,7 +787,7 @@ static void __devinit smp_core99_kick_cpu(int nr)
 {
 	unsigned int save_vector;
 	unsigned long target, flags;
-	unsigned int *vector = (unsigned int *)(KERNELBASE+0x100);
+	unsigned int *vector = (unsigned int *)(PAGE_OFFSET+0x100);
 
 	if (nr < 0 || nr > 3)
 		return;
@@ -801,7 +801,7 @@ static void __devinit smp_core99_kick_cpu(int nr)
 	save_vector = *vector;
 
 	/* Setup fake reset vector that does
-	 *   b __secondary_start_pmac_0 + nr*8 - KERNELBASE
+	 *   b __secondary_start_pmac_0 + nr*8
 	 */
 	target = (unsigned long) __secondary_start_pmac_0 + nr * 8;
 	patch_branch(vector, target, BRANCH_SET_LINK);
diff --git a/arch/powerpc/platforms/powermac/time.c b/arch/powerpc/platforms/powermac/time.c
index bbbefd64ab59..59eb840d8ce2 100644
--- a/arch/powerpc/platforms/powermac/time.c
+++ b/arch/powerpc/platforms/powermac/time.c
@@ -93,11 +93,14 @@ static void to_rtc_time(unsigned long now, struct rtc_time *tm)
 }
 #endif
 
+#if defined(CONFIG_ADB_CUDA) || defined(CONFIG_ADB_PMU) || \
+    defined(CONFIG_PMAC_SMU)
 static unsigned long from_rtc_time(struct rtc_time *tm)
 {
 	return mktime(tm->tm_year+1900, tm->tm_mon+1, tm->tm_mday,
 		      tm->tm_hour, tm->tm_min, tm->tm_sec);
 }
+#endif
 
 #ifdef CONFIG_ADB_CUDA
 static unsigned long cuda_get_time(void)
diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c
index 280ee88cb0b0..a789bf58ca8b 100644
--- a/arch/powerpc/platforms/ps3/system-bus.c
+++ b/arch/powerpc/platforms/ps3/system-bus.c
@@ -762,7 +762,7 @@ int ps3_system_bus_device_register(struct ps3_system_bus_device *dev)
 	};
 
 	dev->core.archdata.of_node = NULL;
-	dev->core.archdata.numa_node = 0;
+	set_dev_node(&dev->core, 0);
 
 	pr_debug("%s:%d add %s\n", __func__, __LINE__, dev->core.bus_id);
 
diff --git a/arch/powerpc/platforms/pseries/cmm.c b/arch/powerpc/platforms/pseries/cmm.c
index 38fe32a7cc70..5cd4d2761620 100644
--- a/arch/powerpc/platforms/pseries/cmm.c
+++ b/arch/powerpc/platforms/pseries/cmm.c
@@ -121,7 +121,7 @@ static long cmm_alloc_pages(long nr)
 			npa = (struct cmm_page_array *)__get_free_page(GFP_NOIO | __GFP_NOWARN |
 								       __GFP_NORETRY | __GFP_NOMEMALLOC);
 			if (!npa) {
-				pr_info("%s: Can not allocate new page list\n", __FUNCTION__);
+				pr_info("%s: Can not allocate new page list\n", __func__);
 				free_page(addr);
 				break;
 			}
@@ -138,7 +138,7 @@ static long cmm_alloc_pages(long nr)
 		}
 
 		if ((rc = plpar_page_set_loaned(__pa(addr)))) {
-			pr_err("%s: Can not set page to loaned. rc=%ld\n", __FUNCTION__, rc);
+			pr_err("%s: Can not set page to loaned. rc=%ld\n", __func__, rc);
 			spin_unlock(&cmm_lock);
 			free_page(addr);
 			break;
diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c
index 8c1ca477c52c..0ad56ff7b4a0 100644
--- a/arch/powerpc/platforms/pseries/eeh_driver.c
+++ b/arch/powerpc/platforms/pseries/eeh_driver.c
@@ -41,7 +41,7 @@ static inline const char * pcid_name (struct pci_dev *pdev)
 	return "";
 }
 
-#ifdef DEBUG
+#if 0
 static void print_device_node_tree(struct pci_dn *pdn, int dent)
 {
 	int i;
diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
index a1a368dd2d99..140d02a5232a 100644
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -21,7 +21,7 @@ static int pseries_remove_lmb(unsigned long base, unsigned int lmb_size)
 	struct zone *zone;
 	int ret;
 
-	start_pfn = base >> PFN_SECTION_SHIFT;
+	start_pfn = base >> PAGE_SHIFT;
 	zone = page_zone(pfn_to_page(start_pfn));
 
 	/*
diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c
index 7637bd38c795..c591a25b0b0d 100644
--- a/arch/powerpc/platforms/pseries/reconfig.c
+++ b/arch/powerpc/platforms/pseries/reconfig.c
@@ -466,11 +466,11 @@ static int do_update_property(char *buf, size_t bufsize)
 		else
 			action = PSERIES_DRCONF_MEM_REMOVE;
 
-		blocking_notifier_call_chain(&pSeries_reconfig_chain,
-					     action, value);
+		rc = blocking_notifier_call_chain(&pSeries_reconfig_chain,
+						  action, value);
 	}
 
-	return 0;
+	return rc;
 }
 
 /**
diff --git a/arch/powerpc/platforms/pseries/rtasd.c b/arch/powerpc/platforms/pseries/rtasd.c
index c9ffd8c225f1..f4e55be2eea9 100644
--- a/arch/powerpc/platforms/pseries/rtasd.c
+++ b/arch/powerpc/platforms/pseries/rtasd.c
@@ -295,19 +295,29 @@ static ssize_t rtas_log_read(struct file * file, char __user * buf,
 	if (!tmp)
 		return -ENOMEM;
 
-
 	spin_lock_irqsave(&rtasd_log_lock, s);
 	/* if it's 0, then we know we got the last one (the one in NVRAM) */
-	if (rtas_log_size == 0 && logging_enabled)
-		nvram_clear_error_log();
-	spin_unlock_irqrestore(&rtasd_log_lock, s);
+	while (rtas_log_size == 0) {
+		if (file->f_flags & O_NONBLOCK) {
+			spin_unlock_irqrestore(&rtasd_log_lock, s);
+			error = -EAGAIN;
+			goto out;
+		}
 
+		if (!logging_enabled) {
+			spin_unlock_irqrestore(&rtasd_log_lock, s);
+			error = -ENODATA;
+			goto out;
+		}
+		nvram_clear_error_log();
 
-	error = wait_event_interruptible(rtas_log_wait, rtas_log_size);
-	if (error)
-		goto out;
+		spin_unlock_irqrestore(&rtasd_log_lock, s);
+		error = wait_event_interruptible(rtas_log_wait, rtas_log_size);
+		if (error)
+			goto out;
+		spin_lock_irqsave(&rtasd_log_lock, s);
+	}
 
-	spin_lock_irqsave(&rtasd_log_lock, s);
 	offset = rtas_error_log_buffer_max * (rtas_log_start & LOG_NUMBER_MASK);
 	memcpy(tmp, &rtas_log_buf[offset], count);
 
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 7b01d67b4e48..ec341707e41b 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -25,7 +25,6 @@
 #include <linux/unistd.h>
 #include <linux/slab.h>
 #include <linux/user.h>
-#include <linux/a.out.h>
 #include <linux/tty.h>
 #include <linux/major.h>
 #include <linux/interrupt.h>
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 9d8f8c84ab89..e00f96baa381 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -37,7 +37,6 @@
 #include <asm/paca.h>
 #include <asm/time.h>
 #include <asm/machdep.h>
-#include "xics.h"
 #include <asm/cputable.h>
 #include <asm/firmware.h>
 #include <asm/system.h>
@@ -49,6 +48,7 @@
 
 #include "plpar_wrappers.h"
 #include "pseries.h"
+#include "xics.h"
 
 
 /*
@@ -105,36 +105,6 @@ static inline int __devinit smp_startup_cpu(unsigned int lcpu)
 }
 
 #ifdef CONFIG_XICS
-static inline void smp_xics_do_message(int cpu, int msg)
-{
-	set_bit(msg, &xics_ipi_message[cpu].value);
-	mb();
-	xics_cause_IPI(cpu);
-}
-
-static void smp_xics_message_pass(int target, int msg)
-{
-	unsigned int i;
-
-	if (target < NR_CPUS) {
-		smp_xics_do_message(target, msg);
-	} else {
-		for_each_online_cpu(i) {
-			if (target == MSG_ALL_BUT_SELF
-			    && i == smp_processor_id())
-				continue;
-			smp_xics_do_message(i, msg);
-		}
-	}
-}
-
-static int __init smp_xics_probe(void)
-{
-	xics_request_IPIs();
-
-	return cpus_weight(cpu_possible_map);
-}
-
 static void __devinit smp_xics_setup_cpu(int cpu)
 {
 	if (cpu != boot_cpuid)
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index 0fc830f576f5..e1904774a70f 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -9,32 +9,30 @@
  *  2 of the License, or (at your option) any later version.
  */
 
-
 #include <linux/types.h>
 #include <linux/threads.h>
 #include <linux/kernel.h>
 #include <linux/irq.h>
 #include <linux/smp.h>
 #include <linux/interrupt.h>
-#include <linux/signal.h>
 #include <linux/init.h>
-#include <linux/gfp.h>
 #include <linux/radix-tree.h>
 #include <linux/cpu.h>
+#include <linux/of.h>
 
 #include <asm/firmware.h>
-#include <asm/prom.h>
 #include <asm/io.h>
 #include <asm/pgtable.h>
 #include <asm/smp.h>
 #include <asm/rtas.h>
 #include <asm/hvcall.h>
 #include <asm/machdep.h>
-#include <asm/i8259.h>
 
 #include "xics.h"
 #include "plpar_wrappers.h"
 
+static struct irq_host *xics_host;
+
 #define XICS_IPI		2
 #define XICS_IRQ_SPURIOUS	0
 
@@ -47,6 +45,20 @@
  */
 #define IPI_PRIORITY		4
 
+static unsigned int default_server = 0xFF;
+static unsigned int default_distrib_server = 0;
+static unsigned int interrupt_server_size = 8;
+
+/* RTAS service tokens */
+static int ibm_get_xive;
+static int ibm_set_xive;
+static int ibm_int_on;
+static int ibm_int_off;
+
+
+/* Direct hardware low level accessors */
+
+/* The part of the interrupt presentation layer that we care about */
 struct xics_ipl {
 	union {
 		u32 word;
@@ -65,27 +77,6 @@ struct xics_ipl {
 
 static struct xics_ipl __iomem *xics_per_cpu[NR_CPUS];
 
-static unsigned int default_server = 0xFF;
-static unsigned int default_distrib_server = 0;
-static unsigned int interrupt_server_size = 8;
-
-static struct irq_host *xics_host;
-
-/*
- * XICS only has a single IPI, so encode the messages per CPU
- */
-struct xics_ipi_struct xics_ipi_message[NR_CPUS] __cacheline_aligned;
-
-/* RTAS service tokens */
-static int ibm_get_xive;
-static int ibm_set_xive;
-static int ibm_int_on;
-static int ibm_int_off;
-
-
-/* Direct HW low level accessors */
-
-
 static inline unsigned int direct_xirr_info_get(void)
 {
 	int cpu = smp_processor_id();
@@ -93,7 +84,7 @@ static inline unsigned int direct_xirr_info_get(void)
 	return in_be32(&xics_per_cpu[cpu]->xirr.word);
 }
 
-static inline void direct_xirr_info_set(int value)
+static inline void direct_xirr_info_set(unsigned int value)
 {
 	int cpu = smp_processor_id();
 
@@ -115,7 +106,6 @@ static inline void direct_qirr_info(int n_cpu, u8 value)
 
 /* LPAR low level accessors */
 
-
 static inline unsigned int lpar_xirr_info_get(void)
 {
 	unsigned long lpar_rc;
@@ -127,15 +117,14 @@ static inline unsigned int lpar_xirr_info_get(void)
 	return (unsigned int)return_value;
 }
 
-static inline void lpar_xirr_info_set(int value)
+static inline void lpar_xirr_info_set(unsigned int value)
 {
 	unsigned long lpar_rc;
-	unsigned long val64 = value & 0xffffffff;
 
-	lpar_rc = plpar_eoi(val64);
+	lpar_rc = plpar_eoi(value);
 	if (lpar_rc != H_SUCCESS)
-		panic("bad return code EOI - rc = %ld, value=%lx\n", lpar_rc,
-		      val64);
+		panic("bad return code EOI - rc = %ld, value=%x\n", lpar_rc,
+		      value);
 }
 
 static inline void lpar_cppr_info(u8 value)
@@ -157,48 +146,7 @@ static inline void lpar_qirr_info(int n_cpu , u8 value)
 }
 
 
-/* High level handlers and init code */
-
-static void xics_update_irq_servers(void)
-{
-	int i, j;
-	struct device_node *np;
-	u32 ilen;
-	const u32 *ireg, *isize;
-	u32 hcpuid;
-
-	/* Find the server numbers for the boot cpu. */
-	np = of_get_cpu_node(boot_cpuid, NULL);
-	BUG_ON(!np);
-
-	ireg = of_get_property(np, "ibm,ppc-interrupt-gserver#s", &ilen);
-	if (!ireg) {
-		of_node_put(np);
-		return;
-	}
-
-	i = ilen / sizeof(int);
-	hcpuid = get_hard_smp_processor_id(boot_cpuid);
-
-	/* Global interrupt distribution server is specified in the last
-	 * entry of "ibm,ppc-interrupt-gserver#s" property. Get the last
-	 * entry fom this property for current boot cpu id and use it as
-	 * default distribution server
-	 */
-	for (j = 0; j < i; j += 2) {
-		if (ireg[j] == hcpuid) {
-			default_server = hcpuid;
-			default_distrib_server = ireg[j+1];
-
-			isize = of_get_property(np,
-					"ibm,interrupt-server#-size", NULL);
-			if (isize)
-				interrupt_server_size = *isize;
-		}
-	}
-
-	of_node_put(np);
-}
+/* Interface to generic irq subsystem */
 
 #ifdef CONFIG_SMP
 static int get_irq_server(unsigned int virq, unsigned int strict_check)
@@ -208,9 +156,6 @@ static int get_irq_server(unsigned int virq, unsigned int strict_check)
 	cpumask_t cpumask = irq_desc[virq].affinity;
 	cpumask_t tmp = CPU_MASK_NONE;
 
-	if (! cpu_isset(default_server, cpu_online_map))
-		xics_update_irq_servers();
-
 	if (!distribute_irqs)
 		return default_server;
 
@@ -238,7 +183,6 @@ static int get_irq_server(unsigned int virq, unsigned int strict_check)
 }
 #endif
 
-
 static void xics_unmask_irq(unsigned int virq)
 {
 	unsigned int irq;
@@ -257,21 +201,28 @@ static void xics_unmask_irq(unsigned int virq)
 	call_status = rtas_call(ibm_set_xive, 3, 1, NULL, irq, server,
 				DEFAULT_PRIORITY);
 	if (call_status != 0) {
-		printk(KERN_ERR "xics_enable_irq: irq=%u: ibm_set_xive "
-		       "returned %d\n", irq, call_status);
-		printk("set_xive %x, server %x\n", ibm_set_xive, server);
+		printk(KERN_ERR
+			"%s: ibm_set_xive irq %u server %x returned %d\n",
+			__func__, irq, server, call_status);
 		return;
 	}
 
 	/* Now unmask the interrupt (often a no-op) */
 	call_status = rtas_call(ibm_int_on, 1, 1, NULL, irq);
 	if (call_status != 0) {
-		printk(KERN_ERR "xics_enable_irq: irq=%u: ibm_int_on "
-		       "returned %d\n", irq, call_status);
+		printk(KERN_ERR "%s: ibm_int_on irq=%u returned %d\n",
+			__func__, irq, call_status);
 		return;
 	}
 }
 
+static unsigned int xics_startup(unsigned int virq)
+{
+	/* unmask it */
+	xics_unmask_irq(virq);
+	return 0;
+}
+
 static void xics_mask_real_irq(unsigned int irq)
 {
 	int call_status;
@@ -281,8 +232,8 @@ static void xics_mask_real_irq(unsigned int irq)
 
 	call_status = rtas_call(ibm_int_off, 1, 1, NULL, irq);
 	if (call_status != 0) {
-		printk(KERN_ERR "xics_disable_real_irq: irq=%u: "
-		       "ibm_int_off returned %d\n", irq, call_status);
+		printk(KERN_ERR "%s: ibm_int_off irq=%u returned %d\n",
+			__func__, irq, call_status);
 		return;
 	}
 
@@ -290,8 +241,8 @@ static void xics_mask_real_irq(unsigned int irq)
 	call_status = rtas_call(ibm_set_xive, 3, 1, NULL, irq,
 				default_server, 0xff);
 	if (call_status != 0) {
-		printk(KERN_ERR "xics_disable_irq: irq=%u: ibm_set_xive(0xff)"
-		       " returned %d\n", irq, call_status);
+		printk(KERN_ERR "%s: ibm_set_xive(0xff) irq=%u returned %d\n",
+			__func__, irq, call_status);
 		return;
 	}
 }
@@ -308,132 +259,77 @@ static void xics_mask_irq(unsigned int virq)
 	xics_mask_real_irq(irq);
 }
 
-static unsigned int xics_startup(unsigned int virq)
-{
-	unsigned int irq;
-
-	/* force a reverse mapping of the interrupt so it gets in the cache */
-	irq = (unsigned int)irq_map[virq].hwirq;
-	irq_radix_revmap(xics_host, irq);
-
-	/* unmask it */
-	xics_unmask_irq(virq);
-	return 0;
-}
-
-static void xics_eoi_direct(unsigned int virq)
+static void xics_mask_unknown_vec(unsigned int vec)
 {
-	unsigned int irq = (unsigned int)irq_map[virq].hwirq;
-
-	iosync();
-	direct_xirr_info_set((0xff << 24) | irq);
+	printk(KERN_ERR "Interrupt %u (real) is invalid, disabling it.\n", vec);
+	xics_mask_real_irq(vec);
 }
 
-
-static void xics_eoi_lpar(unsigned int virq)
+static inline unsigned int xics_xirr_vector(unsigned int xirr)
 {
-	unsigned int irq = (unsigned int)irq_map[virq].hwirq;
-
-	iosync();
-	lpar_xirr_info_set((0xff << 24) | irq);
+	/*
+	 * The top byte is the old cppr, to be restored on EOI.
+	 * The remaining 24 bits are the vector.
+	 */
+	return xirr & 0x00ffffff;
 }
 
-static inline unsigned int xics_remap_irq(unsigned int vec)
+static unsigned int xics_get_irq_direct(void)
 {
+	unsigned int xirr = direct_xirr_info_get();
+	unsigned int vec = xics_xirr_vector(xirr);
 	unsigned int irq;
 
-	vec &= 0x00ffffff;
-
 	if (vec == XICS_IRQ_SPURIOUS)
 		return NO_IRQ;
-	irq = irq_radix_revmap(xics_host, vec);
+
+	irq = irq_radix_revmap_lookup(xics_host, vec);
 	if (likely(irq != NO_IRQ))
 		return irq;
 
-	printk(KERN_ERR "Interrupt %u (real) is invalid,"
-	       " disabling it.\n", vec);
-	xics_mask_real_irq(vec);
-	return NO_IRQ;
-}
+	/* We don't have a linux mapping, so have rtas mask it. */
+	xics_mask_unknown_vec(vec);
 
-static unsigned int xics_get_irq_direct(void)
-{
-	return xics_remap_irq(direct_xirr_info_get());
+	/* We might learn about it later, so EOI it */
+	direct_xirr_info_set(xirr);
+	return NO_IRQ;
 }
 
 static unsigned int xics_get_irq_lpar(void)
 {
-	return xics_remap_irq(lpar_xirr_info_get());
-}
-
-#ifdef CONFIG_SMP
-
-static irqreturn_t xics_ipi_dispatch(int cpu)
-{
-	WARN_ON(cpu_is_offline(cpu));
+	unsigned int xirr = lpar_xirr_info_get();
+	unsigned int vec = xics_xirr_vector(xirr);
+	unsigned int irq;
 
-	while (xics_ipi_message[cpu].value) {
-		if (test_and_clear_bit(PPC_MSG_CALL_FUNCTION,
-				       &xics_ipi_message[cpu].value)) {
-			mb();
-			smp_message_recv(PPC_MSG_CALL_FUNCTION);
-		}
-		if (test_and_clear_bit(PPC_MSG_RESCHEDULE,
-				       &xics_ipi_message[cpu].value)) {
-			mb();
-			smp_message_recv(PPC_MSG_RESCHEDULE);
-		}
-		if (test_and_clear_bit(PPC_MSG_CALL_FUNC_SINGLE,
-				       &xics_ipi_message[cpu].value)) {
-			mb();
-			smp_message_recv(PPC_MSG_CALL_FUNC_SINGLE);
-		}
-#if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC)
-		if (test_and_clear_bit(PPC_MSG_DEBUGGER_BREAK,
-				       &xics_ipi_message[cpu].value)) {
-			mb();
-			smp_message_recv(PPC_MSG_DEBUGGER_BREAK);
-		}
-#endif
-	}
-	return IRQ_HANDLED;
-}
+	if (vec == XICS_IRQ_SPURIOUS)
+		return NO_IRQ;
 
-static irqreturn_t xics_ipi_action_direct(int irq, void *dev_id)
-{
-	int cpu = smp_processor_id();
+	irq = irq_radix_revmap_lookup(xics_host, vec);
+	if (likely(irq != NO_IRQ))
+		return irq;
 
-	direct_qirr_info(cpu, 0xff);
+	/* We don't have a linux mapping, so have RTAS mask it. */
+	xics_mask_unknown_vec(vec);
 
-	return xics_ipi_dispatch(cpu);
+	/* We might learn about it later, so EOI it */
+	lpar_xirr_info_set(xirr);
+	return NO_IRQ;
 }
 
-static irqreturn_t xics_ipi_action_lpar(int irq, void *dev_id)
+static void xics_eoi_direct(unsigned int virq)
 {
-	int cpu = smp_processor_id();
-
-	lpar_qirr_info(cpu, 0xff);
+	unsigned int irq = (unsigned int)irq_map[virq].hwirq;
 
-	return xics_ipi_dispatch(cpu);
+	iosync();
+	direct_xirr_info_set((0xff << 24) | irq);
 }
 
-void xics_cause_IPI(int cpu)
+static void xics_eoi_lpar(unsigned int virq)
 {
-	if (firmware_has_feature(FW_FEATURE_LPAR))
-		lpar_qirr_info(cpu, IPI_PRIORITY);
-	else
-		direct_qirr_info(cpu, IPI_PRIORITY);
-}
-
-#endif /* CONFIG_SMP */
+	unsigned int irq = (unsigned int)irq_map[virq].hwirq;
 
-static void xics_set_cpu_priority(unsigned char cppr)
-{
-	if (firmware_has_feature(FW_FEATURE_LPAR))
-		lpar_cppr_info(cppr);
-	else
-		direct_cppr_info(cppr);
 	iosync();
+	lpar_xirr_info_set((0xff << 24) | irq);
 }
 
 static void xics_set_affinity(unsigned int virq, cpumask_t cpumask)
@@ -450,8 +346,8 @@ static void xics_set_affinity(unsigned int virq, cpumask_t cpumask)
 	status = rtas_call(ibm_get_xive, 1, 3, xics_status, irq);
 
 	if (status) {
-		printk(KERN_ERR "xics_set_affinity: irq=%u ibm,get-xive "
-		       "returns %d\n", irq, status);
+		printk(KERN_ERR "%s: ibm,get-xive irq=%u returns %d\n",
+			__func__, irq, status);
 		return;
 	}
 
@@ -463,8 +359,9 @@ static void xics_set_affinity(unsigned int virq, cpumask_t cpumask)
 	if (irq_server == -1) {
 		char cpulist[128];
 		cpumask_scnprintf(cpulist, sizeof(cpulist), cpumask);
-		printk(KERN_WARNING "xics_set_affinity: No online cpus in "
-				"the mask %s for irq %d\n", cpulist, virq);
+		printk(KERN_WARNING
+			"%s: No online cpus in the mask %s for irq %d\n",
+			__func__, cpulist, virq);
 		return;
 	}
 
@@ -472,28 +369,12 @@ static void xics_set_affinity(unsigned int virq, cpumask_t cpumask)
 				irq, irq_server, xics_status[1]);
 
 	if (status) {
-		printk(KERN_ERR "xics_set_affinity: irq=%u ibm,set-xive "
-		       "returns %d\n", irq, status);
+		printk(KERN_ERR "%s: ibm,set-xive irq=%u returns %d\n",
+			__func__, irq, status);
 		return;
 	}
 }
 
-void xics_setup_cpu(void)
-{
-	xics_set_cpu_priority(0xff);
-
-	/*
-	 * Put the calling processor into the GIQ.  This is really only
-	 * necessary from a secondary thread as the OF start-cpu interface
-	 * performs this function for us on primary threads.
-	 *
-	 * XXX: undo of teardown on kexec needs this too, as may hotplug
-	 */
-	rtas_set_indicator_fast(GLOBAL_INTERRUPT_QUEUE,
-		(1UL << interrupt_server_size) - 1 - default_distrib_server, 1);
-}
-
-
 static struct irq_chip xics_pic_direct = {
 	.typename = " XICS     ",
 	.startup = xics_startup,
@@ -503,7 +384,6 @@ static struct irq_chip xics_pic_direct = {
 	.set_affinity = xics_set_affinity
 };
 
-
 static struct irq_chip xics_pic_lpar = {
 	.typename = " XICS     ",
 	.startup = xics_startup,
@@ -513,6 +393,9 @@ static struct irq_chip xics_pic_lpar = {
 	.set_affinity = xics_set_affinity
 };
 
+
+/* Interface to arch irq controller subsystem layer */
+
 /* Points to the irq_chip we're actually using */
 static struct irq_chip *xics_irq_chip;
 
@@ -530,6 +413,9 @@ static int xics_host_map(struct irq_host *h, unsigned int virq,
 {
 	pr_debug("xics: map virq %d, hwirq 0x%lx\n", virq, hw);
 
+	/* Insert the interrupt mapping into the radix tree for fast lookup */
+	irq_radix_revmap_insert(xics_host, virq, hw);
+
 	get_irq_desc(virq)->status |= IRQ_LEVEL;
 	set_irq_chip_and_handler(virq, xics_irq_chip, handle_fasteoi_irq);
 	return 0;
@@ -569,10 +455,169 @@ static void __init xics_init_host(void)
 	irq_set_default_host(xics_host);
 }
 
+
+/* Inter-processor interrupt support */
+
+#ifdef CONFIG_SMP
+/*
+ * XICS only has a single IPI, so encode the messages per CPU
+ */
+struct xics_ipi_struct {
+        unsigned long value;
+	} ____cacheline_aligned;
+
+static struct xics_ipi_struct xics_ipi_message[NR_CPUS] __cacheline_aligned;
+
+static inline void smp_xics_do_message(int cpu, int msg)
+{
+	set_bit(msg, &xics_ipi_message[cpu].value);
+	mb();
+	if (firmware_has_feature(FW_FEATURE_LPAR))
+		lpar_qirr_info(cpu, IPI_PRIORITY);
+	else
+		direct_qirr_info(cpu, IPI_PRIORITY);
+}
+
+void smp_xics_message_pass(int target, int msg)
+{
+	unsigned int i;
+
+	if (target < NR_CPUS) {
+		smp_xics_do_message(target, msg);
+	} else {
+		for_each_online_cpu(i) {
+			if (target == MSG_ALL_BUT_SELF
+			    && i == smp_processor_id())
+				continue;
+			smp_xics_do_message(i, msg);
+		}
+	}
+}
+
+static irqreturn_t xics_ipi_dispatch(int cpu)
+{
+	WARN_ON(cpu_is_offline(cpu));
+
+	mb();	/* order mmio clearing qirr */
+	while (xics_ipi_message[cpu].value) {
+		if (test_and_clear_bit(PPC_MSG_CALL_FUNCTION,
+				       &xics_ipi_message[cpu].value)) {
+			smp_message_recv(PPC_MSG_CALL_FUNCTION);
+		}
+		if (test_and_clear_bit(PPC_MSG_RESCHEDULE,
+				       &xics_ipi_message[cpu].value)) {
+			smp_message_recv(PPC_MSG_RESCHEDULE);
+		}
+		if (test_and_clear_bit(PPC_MSG_CALL_FUNC_SINGLE,
+				       &xics_ipi_message[cpu].value)) {
+			smp_message_recv(PPC_MSG_CALL_FUNC_SINGLE);
+		}
+#if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC)
+		if (test_and_clear_bit(PPC_MSG_DEBUGGER_BREAK,
+				       &xics_ipi_message[cpu].value)) {
+			smp_message_recv(PPC_MSG_DEBUGGER_BREAK);
+		}
+#endif
+	}
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t xics_ipi_action_direct(int irq, void *dev_id)
+{
+	int cpu = smp_processor_id();
+
+	direct_qirr_info(cpu, 0xff);
+
+	return xics_ipi_dispatch(cpu);
+}
+
+static irqreturn_t xics_ipi_action_lpar(int irq, void *dev_id)
+{
+	int cpu = smp_processor_id();
+
+	lpar_qirr_info(cpu, 0xff);
+
+	return xics_ipi_dispatch(cpu);
+}
+
+static void xics_request_ipi(void)
+{
+	unsigned int ipi;
+	int rc;
+
+	ipi = irq_create_mapping(xics_host, XICS_IPI);
+	BUG_ON(ipi == NO_IRQ);
+
+	/*
+	 * IPIs are marked IRQF_DISABLED as they must run with irqs
+	 * disabled
+	 */
+	set_irq_handler(ipi, handle_percpu_irq);
+	if (firmware_has_feature(FW_FEATURE_LPAR))
+		rc = request_irq(ipi, xics_ipi_action_lpar,
+				IRQF_DISABLED|IRQF_PERCPU, "IPI", NULL);
+	else
+		rc = request_irq(ipi, xics_ipi_action_direct,
+				IRQF_DISABLED|IRQF_PERCPU, "IPI", NULL);
+	BUG_ON(rc);
+}
+
+int __init smp_xics_probe(void)
+{
+	xics_request_ipi();
+
+	return cpus_weight(cpu_possible_map);
+}
+
+#endif /* CONFIG_SMP */
+
+
+/* Initialization */
+
+static void xics_update_irq_servers(void)
+{
+	int i, j;
+	struct device_node *np;
+	u32 ilen;
+	const u32 *ireg, *isize;
+	u32 hcpuid;
+
+	/* Find the server numbers for the boot cpu. */
+	np = of_get_cpu_node(boot_cpuid, NULL);
+	BUG_ON(!np);
+
+	ireg = of_get_property(np, "ibm,ppc-interrupt-gserver#s", &ilen);
+	if (!ireg) {
+		of_node_put(np);
+		return;
+	}
+
+	i = ilen / sizeof(int);
+	hcpuid = get_hard_smp_processor_id(boot_cpuid);
+
+	/* Global interrupt distribution server is specified in the last
+	 * entry of "ibm,ppc-interrupt-gserver#s" property. Get the last
+	 * entry fom this property for current boot cpu id and use it as
+	 * default distribution server
+	 */
+	for (j = 0; j < i; j += 2) {
+		if (ireg[j] == hcpuid) {
+			default_server = hcpuid;
+			default_distrib_server = ireg[j+1];
+		}
+	}
+
+	/* get the bit size of server numbers */
+	isize = of_get_property(np, "ibm,interrupt-server#-size", NULL);
+	if (isize)
+		interrupt_server_size = *isize;
+
+	of_node_put(np);
+}
+
 static void __init xics_map_one_cpu(int hw_id, unsigned long addr,
 				     unsigned long size)
 {
-#ifdef CONFIG_SMP
 	int i;
 
 	/* This may look gross but it's good enough for now, we don't quite
@@ -586,11 +631,6 @@ static void __init xics_map_one_cpu(int hw_id, unsigned long addr,
 			return;
 		}
 	}
-#else
-	if (hw_id != 0)
-		return;
-	xics_per_cpu[0] = ioremap(addr, size);
-#endif /* CONFIG_SMP */
 }
 
 static void __init xics_init_one_node(struct device_node *np,
@@ -652,15 +692,17 @@ void __init xics_init_IRQ(void)
 
 	for_each_node_by_type(np, "PowerPC-External-Interrupt-Presentation") {
 		found = 1;
-		if (firmware_has_feature(FW_FEATURE_LPAR))
+		if (firmware_has_feature(FW_FEATURE_LPAR)) {
+			of_node_put(np);
 			break;
+			}
 		xics_init_one_node(np, &indx);
 	}
 	if (found == 0)
 		return;
 
-	xics_init_host();
 	xics_update_irq_servers();
+	xics_init_host();
 
 	if (firmware_has_feature(FW_FEATURE_LPAR))
 		ppc_md.get_irq = xics_get_irq_lpar;
@@ -672,30 +714,31 @@ void __init xics_init_IRQ(void)
 	ppc64_boot_msg(0x21, "XICS Done");
 }
 
+/* Cpu startup, shutdown, and hotplug */
 
-#ifdef CONFIG_SMP
-void xics_request_IPIs(void)
+static void xics_set_cpu_priority(unsigned char cppr)
 {
-	unsigned int ipi;
-	int rc;
-
-	ipi = irq_create_mapping(xics_host, XICS_IPI);
-	BUG_ON(ipi == NO_IRQ);
-
-	/*
-	 * IPIs are marked IRQF_DISABLED as they must run with irqs
-	 * disabled
-	 */
-	set_irq_handler(ipi, handle_percpu_irq);
 	if (firmware_has_feature(FW_FEATURE_LPAR))
-		rc = request_irq(ipi, xics_ipi_action_lpar, IRQF_DISABLED,
-				"IPI", NULL);
+		lpar_cppr_info(cppr);
 	else
-		rc = request_irq(ipi, xics_ipi_action_direct, IRQF_DISABLED,
-				"IPI", NULL);
-	BUG_ON(rc);
+		direct_cppr_info(cppr);
+	iosync();
+}
+
+/* Have the calling processor join or leave the specified global queue */
+static void xics_set_cpu_giq(unsigned int gserver, unsigned int join)
+{
+	int status = rtas_set_indicator_fast(GLOBAL_INTERRUPT_QUEUE,
+		(1UL << interrupt_server_size) - 1 - gserver, join);
+	WARN_ON(status < 0);
+}
+
+void xics_setup_cpu(void)
+{
+	xics_set_cpu_priority(0xff);
+
+	xics_set_cpu_giq(default_distrib_server, 1);
 }
-#endif /* CONFIG_SMP */
 
 void xics_teardown_cpu(void)
 {
@@ -703,9 +746,7 @@ void xics_teardown_cpu(void)
 
 	xics_set_cpu_priority(0);
 
-	/*
-	 * Clear IPI
-	 */
+	/* Clear any pending IPI request */
 	if (firmware_has_feature(FW_FEATURE_LPAR))
 		lpar_qirr_info(cpu, 0xff);
 	else
@@ -714,34 +755,28 @@ void xics_teardown_cpu(void)
 
 void xics_kexec_teardown_cpu(int secondary)
 {
-	unsigned int ipi;
-	struct irq_desc *desc;
-
 	xics_teardown_cpu();
 
 	/*
-	 * we need to EOI the IPI
+	 * we take the ipi irq but and never return so we
+	 * need to EOI the IPI, but want to leave our priority 0
 	 *
-	 * probably need to check all the other interrupts too
+	 * should we check all the other interrupts too?
 	 * should we be flagging idle loop instead?
 	 * or creating some task to be scheduled?
 	 */
 
-	ipi = irq_find_mapping(xics_host, XICS_IPI);
-	if (ipi == XICS_IRQ_SPURIOUS)
-		return;
-	desc = get_irq_desc(ipi);
-	if (desc->chip && desc->chip->eoi)
-		desc->chip->eoi(ipi);
+	if (firmware_has_feature(FW_FEATURE_LPAR))
+		lpar_xirr_info_set((0x00 << 24) | XICS_IPI);
+	else
+		direct_xirr_info_set((0x00 << 24) | XICS_IPI);
 
 	/*
 	 * Some machines need to have at least one cpu in the GIQ,
 	 * so leave the master cpu in the group.
 	 */
 	if (secondary)
-		rtas_set_indicator_fast(GLOBAL_INTERRUPT_QUEUE,
-				   (1UL << interrupt_server_size) - 1 -
-				   default_distrib_server, 0);
+		xics_set_cpu_giq(default_distrib_server, 0);
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
@@ -749,17 +784,18 @@ void xics_kexec_teardown_cpu(int secondary)
 /* Interrupts are disabled. */
 void xics_migrate_irqs_away(void)
 {
-	int status;
 	int cpu = smp_processor_id(), hw_cpu = hard_smp_processor_id();
 	unsigned int irq, virq;
 
+	/* If we used to be the default server, move to the new "boot_cpuid" */
+	if (hw_cpu == default_server)
+		xics_update_irq_servers();
+
 	/* Reject any interrupt that was queued to us... */
 	xics_set_cpu_priority(0);
 
-	/* remove ourselves from the global interrupt queue */
-	status = rtas_set_indicator_fast(GLOBAL_INTERRUPT_QUEUE,
-		(1UL << interrupt_server_size) - 1 - default_distrib_server, 0);
-	WARN_ON(status < 0);
+	/* Remove ourselves from the global interrupt queue */
+	xics_set_cpu_giq(default_distrib_server, 0);
 
 	/* Allow IPIs again... */
 	xics_set_cpu_priority(DEFAULT_PRIORITY);
@@ -767,6 +803,7 @@ void xics_migrate_irqs_away(void)
 	for_each_irq(virq) {
 		struct irq_desc *desc;
 		int xics_status[2];
+		int status;
 		unsigned long flags;
 
 		/* We cant set affinity on ISA interrupts */
@@ -790,9 +827,8 @@ void xics_migrate_irqs_away(void)
 
 		status = rtas_call(ibm_get_xive, 1, 3, xics_status, irq);
 		if (status) {
-			printk(KERN_ERR "migrate_irqs_away: irq=%u "
-					"ibm,get-xive returns %d\n",
-					virq, status);
+			printk(KERN_ERR "%s: ibm,get-xive irq=%u returns %d\n",
+					__func__, irq, status);
 			goto unlock;
 		}
 
diff --git a/arch/powerpc/platforms/pseries/xics.h b/arch/powerpc/platforms/pseries/xics.h
index 1c5321ae8f2f..d1d5a83039ae 100644
--- a/arch/powerpc/platforms/pseries/xics.h
+++ b/arch/powerpc/platforms/pseries/xics.h
@@ -12,20 +12,12 @@
 #ifndef _POWERPC_KERNEL_XICS_H
 #define _POWERPC_KERNEL_XICS_H
 
-#include <linux/cache.h>
-
 extern void xics_init_IRQ(void);
 extern void xics_setup_cpu(void);
 extern void xics_teardown_cpu(void);
 extern void xics_kexec_teardown_cpu(int secondary);
-extern void xics_cause_IPI(int cpu);
-extern  void xics_request_IPIs(void);
 extern void xics_migrate_irqs_away(void);
-
-struct xics_ipi_struct {
-	volatile unsigned long value;
-} ____cacheline_aligned;
-
-extern struct xics_ipi_struct xics_ipi_message[NR_CPUS] __cacheline_aligned;
+extern int smp_xics_probe(void);
+extern void smp_xics_message_pass(int target, int msg);
 
 #endif /* _POWERPC_KERNEL_XICS_H */