powerpc/eeh: pseries platform EEH PE address retrieval

There're 2 types of addresses used for EEH operations. The first
one would be BDF (Bus/Device/Function) address which is retrieved
from the reg property of the corresponding FDT node. Another one
is PE address that should be enquired from firmware through RTAS
call on pSeries platform. When issuing EEH operation, the PE address
has precedence over BDF address.

The patch implements retrieving PE address according to the given
BDF address on pSeries platform. Also, the struct eeh_early_enable_info
has been removed since the information can be figured out from
dn->pdn->phb->buid directly and that simplifies the code.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

1 files changed, 3 insertions, 64 deletions

diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 70a9617cc6c0..00797e079f49 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -91,8 +91,6 @@ static int ibm_set_slot_reset;
 static int ibm_read_slot_reset_state;
 static int ibm_read_slot_reset_state2;
 static int ibm_slot_error_detail;
-static int ibm_get_config_addr_info;
-static int ibm_get_config_addr_info2;
 static int ibm_configure_bridge;
 static int ibm_configure_pe;
 
@@ -1048,56 +1046,6 @@ void eeh_configure_bridge(struct pci_dn *pdn)
 	}
 }
 
-#define EEH_ENABLE 1
-
-struct eeh_early_enable_info {
-	unsigned int buid_hi;
-	unsigned int buid_lo;
-};
-
-/**
- * eeh_get_pe_addr - Retrieve PE address with given BDF address
- * @config_addr: BDF address
- * @info: BUID of the associated PHB
- *
- * There're 2 kinds of addresses existing in EEH core components:
- * BDF address and PE address. Besides, there has dedicated platform
- * dependent function call to retrieve the PE address according to
- * the given BDF address. Further more, we prefer PE address on BDF
- * address in EEH core components.
- */
-static int eeh_get_pe_addr(int config_addr,
-                        struct eeh_early_enable_info *info)
-{
-	unsigned int rets[3];
-	int ret;
-
-	/* Use latest config-addr token on power6 */
-	if (ibm_get_config_addr_info2 != RTAS_UNKNOWN_SERVICE) {
-		/* Make sure we have a PE in hand */
-		ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets,
-			config_addr, info->buid_hi, info->buid_lo, 1);
-		if (ret || (rets[0]==0))
-			return 0;
-
-		ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets,
-			config_addr, info->buid_hi, info->buid_lo, 0);
-		if (ret)
-			return 0;
-		return rets[0];
-	}
-
-	/* Use older config-addr token on power5 */
-	if (ibm_get_config_addr_info != RTAS_UNKNOWN_SERVICE) {
-		ret = rtas_call(ibm_get_config_addr_info, 4, 2, rets,
-			config_addr, info->buid_hi, info->buid_lo, 0);
-		if (ret)
-			return 0;
-		return rets[0];
-	}
-	return 0;
-}
-
 /**
  * eeh_early_enable - Early enable EEH on the indicated device
  * @dn: device node
@@ -1110,7 +1058,6 @@ static int eeh_get_pe_addr(int config_addr,
 static void *eeh_early_enable(struct device_node *dn, void *data)
 {
 	unsigned int rets[3];
-	struct eeh_early_enable_info *info = data;
 	int ret;
 	const u32 *class_code = of_get_property(dn, "class-code", NULL);
 	const u32 *vendor_id = of_get_property(dn, "vendor-id", NULL);
@@ -1155,7 +1102,7 @@ static void *eeh_early_enable(struct device_node *dn, void *data)
 			/* If the newer, better, ibm,get-config-addr-info is supported, 
 			 * then use that instead.
 			 */
-			pdn->eeh_pe_config_addr = eeh_get_pe_addr(pdn->eeh_config_addr, info);
+			pdn->eeh_pe_config_addr = eeh_ops->get_pe_addr(dn);
 
 			/* Some older systems (Power4) allow the
 			 * ibm,set-eeh-option call to succeed even on nodes
@@ -1264,7 +1211,6 @@ int __exit eeh_ops_unregister(const char *name)
 void __init eeh_init(void)
 {
 	struct device_node *phb, *np;
-	struct eeh_early_enable_info info;
 	int ret;
 
 	/* call platform initialization function */
@@ -1289,8 +1235,6 @@ void __init eeh_init(void)
 	ibm_read_slot_reset_state2 = rtas_token("ibm,read-slot-reset-state2");
 	ibm_read_slot_reset_state = rtas_token("ibm,read-slot-reset-state");
 	ibm_slot_error_detail = rtas_token("ibm,slot-error-detail");
-	ibm_get_config_addr_info = rtas_token("ibm,get-config-addr-info");
-	ibm_get_config_addr_info2 = rtas_token("ibm,get-config-addr-info2");
 	ibm_configure_bridge = rtas_token("ibm,configure-bridge");
 	ibm_configure_pe = rtas_token("ibm,configure-pe");
 
@@ -1313,9 +1257,7 @@ void __init eeh_init(void)
 		if (buid == 0 || PCI_DN(phb) == NULL)
 			continue;
 
-		info.buid_lo = BUID_LO(buid);
-		info.buid_hi = BUID_HI(buid);
-		traverse_pci_devices(phb, eeh_early_enable, &info);
+		traverse_pci_devices(phb, eeh_early_enable, NULL);
 	}
 
 	if (eeh_subsystem_enabled)
@@ -1339,7 +1281,6 @@ void __init eeh_init(void)
 static void eeh_add_device_early(struct device_node *dn)
 {
 	struct pci_controller *phb;
-	struct eeh_early_enable_info info;
 
 	if (!dn || !PCI_DN(dn))
 		return;
@@ -1349,9 +1290,7 @@ static void eeh_add_device_early(struct device_node *dn)
 	if (NULL == phb || 0 == phb->buid)
 		return;
 
-	info.buid_hi = BUID_HI(phb->buid);
-	info.buid_lo = BUID_LO(phb->buid);
-	eeh_early_enable(dn, &info);
+	eeh_early_enable(dn, NULL);
 }
 
 /**