Merge branch 'kbuild/rc-fixes' into kbuild/kconfig

We need to revert the temporary hack in 71ebc01, hence the merge.

1 files changed, 284 insertions, 0 deletions

diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c
index 707e572b7c40..e41ebbdb3e12 100644
--- a/arch/powerpc/platforms/512x/mpc512x_shared.c
+++ b/arch/powerpc/platforms/512x/mpc512x_shared.c
@@ -16,7 +16,11 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/of_platform.h>
+#include <linux/fsl-diu-fb.h>
+#include <linux/bootmem.h>
+#include <sysdev/fsl_soc.h>
 
+#include <asm/cacheflush.h>
 #include <asm/machdep.h>
 #include <asm/ipic.h>
 #include <asm/prom.h>
@@ -54,6 +58,286 @@ void mpc512x_restart(char *cmd)
 		;
 }
 
+struct fsl_diu_shared_fb {
+	u8		gamma[0x300];	/* 32-bit aligned! */
+	struct diu_ad	ad0;		/* 32-bit aligned! */
+	phys_addr_t	fb_phys;
+	size_t		fb_len;
+	bool		in_use;
+};
+
+unsigned int mpc512x_get_pixel_format(unsigned int bits_per_pixel,
+				      int monitor_port)
+{
+	switch (bits_per_pixel) {
+	case 32:
+		return 0x88883316;
+	case 24:
+		return 0x88082219;
+	case 16:
+		return 0x65053118;
+	}
+	return 0x00000400;
+}
+
+void mpc512x_set_gamma_table(int monitor_port, char *gamma_table_base)
+{
+}
+
+void mpc512x_set_monitor_port(int monitor_port)
+{
+}
+
+#define DIU_DIV_MASK	0x000000ff
+void mpc512x_set_pixel_clock(unsigned int pixclock)
+{
+	unsigned long bestval, bestfreq, speed, busfreq;
+	unsigned long minpixclock, maxpixclock, pixval;
+	struct mpc512x_ccm __iomem *ccm;
+	struct device_node *np;
+	u32 temp;
+	long err;
+	int i;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-clock");
+	if (!np) {
+		pr_err("Can't find clock control module.\n");
+		return;
+	}
+
+	ccm = of_iomap(np, 0);
+	of_node_put(np);
+	if (!ccm) {
+		pr_err("Can't map clock control module reg.\n");
+		return;
+	}
+
+	np = of_find_node_by_type(NULL, "cpu");
+	if (np) {
+		const unsigned int *prop =
+			of_get_property(np, "bus-frequency", NULL);
+
+		of_node_put(np);
+		if (prop) {
+			busfreq = *prop;
+		} else {
+			pr_err("Can't get bus-frequency property\n");
+			return;
+		}
+	} else {
+		pr_err("Can't find 'cpu' node.\n");
+		return;
+	}
+
+	/* Pixel Clock configuration */
+	pr_debug("DIU: Bus Frequency = %lu\n", busfreq);
+	speed = busfreq * 4; /* DIU_DIV ratio is 4 * CSB_CLK / DIU_CLK */
+
+	/* Calculate the pixel clock with the smallest error */
+	/* calculate the following in steps to avoid overflow */
+	pr_debug("DIU pixclock in ps - %d\n", pixclock);
+	temp = (1000000000 / pixclock) * 1000;
+	pixclock = temp;
+	pr_debug("DIU pixclock freq - %u\n", pixclock);
+
+	temp = temp / 20; /* pixclock * 0.05 */
+	pr_debug("deviation = %d\n", temp);
+	minpixclock = pixclock - temp;
+	maxpixclock = pixclock + temp;
+	pr_debug("DIU minpixclock - %lu\n", minpixclock);
+	pr_debug("DIU maxpixclock - %lu\n", maxpixclock);
+	pixval = speed/pixclock;
+	pr_debug("DIU pixval = %lu\n", pixval);
+
+	err = LONG_MAX;
+	bestval = pixval;
+	pr_debug("DIU bestval = %lu\n", bestval);
+
+	bestfreq = 0;
+	for (i = -1; i <= 1; i++) {
+		temp = speed / (pixval+i);
+		pr_debug("DIU test pixval i=%d, pixval=%lu, temp freq. = %u\n",
+			i, pixval, temp);
+		if ((temp < minpixclock) || (temp > maxpixclock))
+			pr_debug("DIU exceeds monitor range (%lu to %lu)\n",
+				minpixclock, maxpixclock);
+		else if (abs(temp - pixclock) < err) {
+			pr_debug("Entered the else if block %d\n", i);
+			err = abs(temp - pixclock);
+			bestval = pixval + i;
+			bestfreq = temp;
+		}
+	}
+
+	pr_debug("DIU chose = %lx\n", bestval);
+	pr_debug("DIU error = %ld\n NomPixClk ", err);
+	pr_debug("DIU: Best Freq = %lx\n", bestfreq);
+	/* Modify DIU_DIV in CCM SCFR1 */
+	temp = in_be32(&ccm->scfr1);
+	pr_debug("DIU: Current value of SCFR1: 0x%08x\n", temp);
+	temp &= ~DIU_DIV_MASK;
+	temp |= (bestval & DIU_DIV_MASK);
+	out_be32(&ccm->scfr1, temp);
+	pr_debug("DIU: Modified value of SCFR1: 0x%08x\n", temp);
+	iounmap(ccm);
+}
+
+ssize_t mpc512x_show_monitor_port(int monitor_port, char *buf)
+{
+	return sprintf(buf, "0 - 5121 LCD\n");
+}
+
+int mpc512x_set_sysfs_monitor_port(int val)
+{
+	return 0;
+}
+
+static struct fsl_diu_shared_fb __attribute__ ((__aligned__(8))) diu_shared_fb;
+
+#if defined(CONFIG_FB_FSL_DIU) || \
+    defined(CONFIG_FB_FSL_DIU_MODULE)
+static inline void mpc512x_free_bootmem(struct page *page)
+{
+	__ClearPageReserved(page);
+	BUG_ON(PageTail(page));
+	BUG_ON(atomic_read(&page->_count) > 1);
+	atomic_set(&page->_count, 1);
+	__free_page(page);
+	totalram_pages++;
+}
+
+void mpc512x_release_bootmem(void)
+{
+	unsigned long addr = diu_shared_fb.fb_phys & PAGE_MASK;
+	unsigned long size = diu_shared_fb.fb_len;
+	unsigned long start, end;
+
+	if (diu_shared_fb.in_use) {
+		start = PFN_UP(addr);
+		end = PFN_DOWN(addr + size);
+
+		for (; start < end; start++)
+			mpc512x_free_bootmem(pfn_to_page(start));
+
+		diu_shared_fb.in_use = false;
+	}
+	diu_ops.release_bootmem	= NULL;
+}
+#endif
+
+/*
+ * Check if DIU was pre-initialized. If so, perform steps
+ * needed to continue displaying through the whole boot process.
+ * Move area descriptor and gamma table elsewhere, they are
+ * destroyed by bootmem allocator otherwise. The frame buffer
+ * address range will be reserved in setup_arch() after bootmem
+ * allocator is up.
+ */
+void __init mpc512x_init_diu(void)
+{
+	struct device_node *np;
+	struct diu __iomem *diu_reg;
+	phys_addr_t desc;
+	void __iomem *vaddr;
+	unsigned long mode, pix_fmt, res, bpp;
+	unsigned long dst;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-diu");
+	if (!np) {
+		pr_err("No DIU node\n");
+		return;
+	}
+
+	diu_reg = of_iomap(np, 0);
+	of_node_put(np);
+	if (!diu_reg) {
+		pr_err("Can't map DIU\n");
+		return;
+	}
+
+	mode = in_be32(&diu_reg->diu_mode);
+	if (mode != MFB_MODE1) {
+		pr_info("%s: DIU OFF\n", __func__);
+		goto out;
+	}
+
+	desc = in_be32(&diu_reg->desc[0]);
+	vaddr = ioremap(desc, sizeof(struct diu_ad));
+	if (!vaddr) {
+		pr_err("Can't map DIU area desc.\n");
+		goto out;
+	}
+	memcpy(&diu_shared_fb.ad0, vaddr, sizeof(struct diu_ad));
+	/* flush fb area descriptor */
+	dst = (unsigned long)&diu_shared_fb.ad0;
+	flush_dcache_range(dst, dst + sizeof(struct diu_ad) - 1);
+
+	res = in_be32(&diu_reg->disp_size);
+	pix_fmt = in_le32(vaddr);
+	bpp = ((pix_fmt >> 16) & 0x3) + 1;
+	diu_shared_fb.fb_phys = in_le32(vaddr + 4);
+	diu_shared_fb.fb_len = ((res & 0xfff0000) >> 16) * (res & 0xfff) * bpp;
+	diu_shared_fb.in_use = true;
+	iounmap(vaddr);
+
+	desc = in_be32(&diu_reg->gamma);
+	vaddr = ioremap(desc, sizeof(diu_shared_fb.gamma));
+	if (!vaddr) {
+		pr_err("Can't map DIU area desc.\n");
+		diu_shared_fb.in_use = false;
+		goto out;
+	}
+	memcpy(&diu_shared_fb.gamma, vaddr, sizeof(diu_shared_fb.gamma));
+	/* flush gamma table */
+	dst = (unsigned long)&diu_shared_fb.gamma;
+	flush_dcache_range(dst, dst + sizeof(diu_shared_fb.gamma) - 1);
+
+	iounmap(vaddr);
+	out_be32(&diu_reg->gamma, virt_to_phys(&diu_shared_fb.gamma));
+	out_be32(&diu_reg->desc[1], 0);
+	out_be32(&diu_reg->desc[2], 0);
+	out_be32(&diu_reg->desc[0], virt_to_phys(&diu_shared_fb.ad0));
+
+out:
+	iounmap(diu_reg);
+}
+
+void __init mpc512x_setup_diu(void)
+{
+	int ret;
+
+	/*
+	 * We do not allocate and configure new area for bitmap buffer
+	 * because it would requere copying bitmap data (splash image)
+	 * and so negatively affect boot time. Instead we reserve the
+	 * already configured frame buffer area so that it won't be
+	 * destroyed. The starting address of the area to reserve and
+	 * also it's length is passed to reserve_bootmem(). It will be
+	 * freed later on first open of fbdev, when splash image is not
+	 * needed any more.
+	 */
+	if (diu_shared_fb.in_use) {
+		ret = reserve_bootmem(diu_shared_fb.fb_phys,
+				      diu_shared_fb.fb_len,
+				      BOOTMEM_EXCLUSIVE);
+		if (ret) {
+			pr_err("%s: reserve bootmem failed\n", __func__);
+			diu_shared_fb.in_use = false;
+		}
+	}
+
+#if defined(CONFIG_FB_FSL_DIU) || \
+    defined(CONFIG_FB_FSL_DIU_MODULE)
+	diu_ops.get_pixel_format	= mpc512x_get_pixel_format;
+	diu_ops.set_gamma_table		= mpc512x_set_gamma_table;
+	diu_ops.set_monitor_port	= mpc512x_set_monitor_port;
+	diu_ops.set_pixel_clock		= mpc512x_set_pixel_clock;
+	diu_ops.show_monitor_port	= mpc512x_show_monitor_port;
+	diu_ops.set_sysfs_monitor_port	= mpc512x_set_sysfs_monitor_port;
+	diu_ops.release_bootmem		= mpc512x_release_bootmem;
+#endif
+}
+
 void __init mpc512x_init_IRQ(void)
 {
 	struct device_node *np;