diff options
| author | Mathieu Malaterre <malat@debian.org> | 2017-12-14 19:54:00 +0300 |
|---|---|---|
| committer | Michael Ellerman <mpe@ellerman.id.au> | 2018-01-21 15:37:45 +0300 |
| commit | 600ecc1936be075f611f299755e2de90b205eb82 (patch) | |
| tree | 32ba6cfe6a1aa8a5d2f9fa6d66e9443c1b0aefa0 /arch/powerpc/boot/dts/mpc832x_rdb.dts | |
| parent | 00f7b29f6e9b8ab900b1de19e72c457fd6702ccb (diff) | |
| download | linux-600ecc1936be075f611f299755e2de90b205eb82.tar.xz | |
powerpc/boot/dts: Remove leading 0x and 0s from bindings notation
Improve the DTS files by removing all the leading "0x" and zeros to
fix the following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and:
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -E -i -e "s/@0x([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" -e "s/@0+([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" {} +
For simplicity, two sed expressions were used to solve each warnings
separately.
To make the regex expression more robust a few other issues were
resolved, namely setting unit-address to lower case, and adding a
whitespace before the the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove
leading 0x from bindings notation")
Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Diffstat (limited to 'arch/powerpc/boot/dts/mpc832x_rdb.dts')
| -rw-r--r-- | arch/powerpc/boot/dts/mpc832x_rdb.dts | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts index 91df1eb16667..647cae14c16d 100644 --- a/arch/powerpc/boot/dts/mpc832x_rdb.dts +++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts @@ -175,7 +175,7 @@ gpio-controller; }; - ucc2pio:ucc_pin@02 { + ucc2pio:ucc_pin@2 { pio-map = < /* port pin dir open_drain assignment has_irq */ 3 4 3 0 2 0 /* MDIO */ @@ -197,7 +197,7 @@ 0 30 1 0 1 0 /* TX_EN */ 0 31 2 0 1 0>; /* CRS */ }; - ucc3pio:ucc_pin@03 { + ucc3pio:ucc_pin@3 { pio-map = < /* port pin dir open_drain assignment has_irq */ 0 13 2 0 1 0 /* RX_CLK (CLK9) */ @@ -310,12 +310,12 @@ reg = <0x3120 0x18>; compatible = "fsl,ucc-mdio"; - phy00:ethernet-phy@00 { + phy00:ethernet-phy@0 { interrupt-parent = <&ipic>; interrupts = <0>; reg = <0x0>; }; - phy04:ethernet-phy@04 { + phy04:ethernet-phy@4 { interrupt-parent = <&ipic>; interrupts = <0>; reg = <0x4>; |