[MIPS] Support for several more SNI RM models.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 27 insertions, 215 deletions

diff --git a/arch/mips/sni/setup.c b/arch/mips/sni/setup.c
index afeb7f13e5b5..68d7cf609b4f 100644
--- a/arch/mips/sni/setup.c
+++ b/arch/mips/sni/setup.c
@@ -6,16 +6,10 @@
  * for more details.
  *
  * Copyright (C) 1996, 97, 98, 2000, 03, 04, 06 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
  */
 #include <linux/eisa.h>
-#include <linux/hdreg.h>
-#include <linux/ioport.h>
-#include <linux/sched.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/mc146818rtc.h>
-#include <linux/pm.h>
-#include <linux/pci.h>
 #include <linux/console.h>
 #include <linux/fb.h>
 #include <linux/screen_info.h>
@@ -25,52 +19,16 @@
 #include <asm/sgialib.h>
 #endif
 
-#include <asm/bcache.h>
-#include <asm/bootinfo.h>
 #include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/mc146818-time.h>
-#include <asm/processor.h>
 #include <asm/reboot.h>
 #include <asm/sni.h>
-#include <asm/time.h>
-#include <asm/traps.h>
+
+unsigned int sni_brd_type;
 
 extern void sni_machine_restart(char *command);
 extern void sni_machine_halt(void);
 extern void sni_machine_power_off(void);
 
-void __init plat_timer_setup(struct irqaction *irq)
-{
-	/* set the clock to 100 Hz */
-	outb_p(0x34,0x43);		/* binary, mode 2, LSB/MSB, ch 0 */
-	outb_p(LATCH & 0xff , 0x40);	/* LSB */
-	outb(LATCH >> 8 , 0x40);	/* MSB */
-	setup_irq(0, irq);
-}
-
-/*
- * A bit more gossip about the iron we're running on ...
- */
-static inline void sni_pcimt_detect(void)
-{
-	char boardtype[80];
-	unsigned char csmsr;
-	char *p = boardtype;
-	unsigned int asic;
-
-	csmsr = *(volatile unsigned char *)PCIMT_CSMSR;
-
-	p += sprintf(p, "%s PCI", (csmsr & 0x80) ? "RM200" : "RM300");
-	if ((csmsr & 0x80) == 0)
-		p += sprintf(p, ", board revision %s",
-		             (csmsr & 0x20) ? "D" : "C");
-	asic = csmsr & 0x80;
-	asic = (csmsr & 0x08) ? asic : !asic;
-	p += sprintf(p, ", ASIC PCI Rev %s", asic ? "1.0" : "1.1");
-	printk("%s.\n", boardtype);
-}
-
 static void __init sni_display_setup(void)
 {
 #if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE) && defined(CONFIG_ARC)
@@ -90,175 +48,11 @@ static void __init sni_display_setup(void)
 #endif
 }
 
-static struct resource sni_io_resource = {
-	.start	= 0x00001000UL,
-	.end	= 0x03bfffffUL,
-	.name	= "PCIMT IO MEM",
-	.flags	= IORESOURCE_IO,
-};
-
-static struct resource pcimt_io_resources[] = {
-	{
-		.start	= 0x00,
-		.end	= 0x1f,
-		.name	= "dma1",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	=  0x40,
-		.end	= 0x5f,
-		.name	= "timer",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	=  0x60,
-		.end	= 0x6f,
-		.name	= "keyboard",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	=  0x80,
-		.end	= 0x8f,
-		.name	= "dma page reg",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	=  0xc0,
-		.end	= 0xdf,
-		.name	= "dma2",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	=  0xcfc,
-		.end	= 0xcff,
-		.name	= "PCI config data",
-		.flags	= IORESOURCE_BUSY
-	}
-};
-
-static struct resource sni_mem_resource = {
-	.start	= 0x10000000UL,
-	.end	= 0xffffffffUL,
-	.name	= "PCIMT PCI MEM",
-	.flags	= IORESOURCE_MEM
-};
-
-/*
- * The RM200/RM300 has a few holes in it's PCI/EISA memory address space used
- * for other purposes.  Be paranoid and allocate all of the before the PCI
- * code gets a chance to to map anything else there ...
- *
- * This leaves the following areas available:
- *
- * 0x10000000 - 0x1009ffff (640kB) PCI/EISA/ISA Bus Memory
- * 0x10100000 - 0x13ffffff ( 15MB) PCI/EISA/ISA Bus Memory
- * 0x18000000 - 0x1fbfffff (124MB) PCI/EISA Bus Memory
- * 0x1ff08000 - 0x1ffeffff (816kB) PCI/EISA Bus Memory
- * 0xa0000000 - 0xffffffff (1.5GB) PCI/EISA Bus Memory
- */
-static struct resource pcimt_mem_resources[] = {
-	{
-		.start	= 0x100a0000,
-		.end	= 0x100bffff,
-		.name	= "Video RAM area",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x100c0000,
-		.end	= 0x100fffff,
-		.name	= "ISA Reserved",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x14000000,
-		.end	= 0x17bfffff,
-		.name	= "PCI IO",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x17c00000,
-		.end	= 0x17ffffff,
-		.name	= "Cache Replacement Area",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x1a000000,
-		.end	= 0x1a000003,
-		.name	= "PCI INT Acknowledge",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x1fc00000,
-		.end	= 0x1fc7ffff,
-		.name	= "Boot PROM",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x1fc80000,
-		.end	= 0x1fcfffff,
-		.name	= "Diag PROM",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x1fd00000,
-		.end	= 0x1fdfffff,
-		.name	= "X-Bus",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x1fe00000,
-		.end	= 0x1fefffff,
-		.name	= "BIOS map",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x1ff00000,
-		.end	= 0x1ff7ffff,
-		.name	= "NVRAM / EEPROM",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x1fff0000,
-		.end	= 0x1fffefff,
-		.name	= "ASIC PCI",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x1ffff000,
-		.end	= 0x1fffffff,
-		.name	= "MP Agent",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x20000000,
-		.end	= 0x9fffffff,
-		.name	= "Main Memory",
-		.flags	= IORESOURCE_BUSY
-	}
-};
-
-static void __init sni_resource_init(void)
-{
-	int i;
-
-	/* request I/O space for devices used on all i[345]86 PCs */
-	for (i = 0; i < ARRAY_SIZE(pcimt_io_resources); i++)
-		request_resource(&ioport_resource, pcimt_io_resources + i);
-
-	/* request mem space for pcimt-specific devices */
-	for (i = 0; i < ARRAY_SIZE(pcimt_mem_resources); i++)
-		request_resource(&sni_mem_resource, pcimt_mem_resources + i);
-
-	ioport_resource.end = sni_io_resource.end;
-}
-
-extern struct pci_ops sni_pci_ops;
-
-static struct pci_controller sni_controller = {
-	.pci_ops	= &sni_pci_ops,
-	.mem_resource	= &sni_mem_resource,
-	.mem_offset	= 0x10000000UL,
-	.io_resource	= &sni_io_resource,
-	.io_offset	= 0x00000000UL
-};
-
-static inline void sni_pcimt_time_init(void)
-{
-	rtc_mips_get_time = mc146818_get_cmos_time;
-	rtc_mips_set_time = mc146818_set_rtc_mmss;
-}
 
 void __init plat_mem_setup(void)
 {
-	sni_pcimt_detect();
-	sni_pcimt_sc_init();
-	sni_pcimt_time_init();
-
 	set_io_port_base(SNI_PORT_BASE);
-	ioport_resource.end = sni_io_resource.end;
+//	ioport_resource.end = sni_io_resource.end;
 
 	/*
 	 * Setup (E)ISA I/O memory access stuff
@@ -268,15 +62,33 @@ void __init plat_mem_setup(void)
 	EISA_bus = 1;
 #endif
 
-	sni_resource_init();
+	switch (sni_brd_type) {
+	case SNI_BRD_10:
+	case SNI_BRD_10NEW:
+	case SNI_BRD_TOWER_OASIC:
+	case SNI_BRD_MINITOWER:
+	        sni_a20r_init();
+	        break;
+
+	case SNI_BRD_PCI_TOWER:
+	case SNI_BRD_PCI_TOWER_CPLUS:
+	        sni_pcit_init();
+		break;
+
+	case SNI_BRD_RM200:
+	        sni_rm200_init();
+	        break;
+
+	case SNI_BRD_PCI_MTOWER:
+	case SNI_BRD_PCI_DESKTOP:
+	case SNI_BRD_PCI_MTOWER_CPLUS:
+	        sni_pcimt_init();
+	        break;
+	}
 
 	_machine_restart = sni_machine_restart;
 	_machine_halt = sni_machine_halt;
 	pm_power_off = sni_machine_power_off;
 
 	sni_display_setup();
-
-#ifdef CONFIG_PCI
-	register_pci_controller(&sni_controller);
-#endif
 }