MIPS: Remove PMC MSP71xx platform

No (active) developer owns this hardware, so let's remove Linux support.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

17 files changed, 0 insertions, 2248 deletions

diff --git a/arch/mips/pmcs-msp71xx/Kconfig b/arch/mips/pmcs-msp71xx/Kconfig
deleted file mode 100644
index b185b7620c97..000000000000
--- a/arch/mips/pmcs-msp71xx/Kconfig
+++ /dev/null
@@ -1,50 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-choice
-	prompt "PMC-Sierra MSP SOC type"
-	depends on PMC_MSP
-
-config PMC_MSP4200_EVAL
-	bool "PMC-Sierra MSP4200 Eval Board"
-	select IRQ_MSP_SLP
-	select HAVE_PCI
-	select MIPS_L1_CACHE_SHIFT_4
-
-config PMC_MSP4200_GW
-	bool "PMC-Sierra MSP4200 VoIP Gateway"
-	select IRQ_MSP_SLP
-	select HAVE_PCI
-
-config PMC_MSP7120_EVAL
-	bool "PMC-Sierra MSP7120 Eval Board"
-	select SYS_SUPPORTS_MULTITHREADING
-	select IRQ_MSP_CIC
-	select HAVE_PCI
-
-config PMC_MSP7120_GW
-	bool "PMC-Sierra MSP7120 Residential Gateway"
-	select SYS_SUPPORTS_MULTITHREADING
-	select IRQ_MSP_CIC
-	select HAVE_PCI
-	select MSP_HAS_USB
-	select MSP_ETH
-
-config PMC_MSP7120_FPGA
-	bool "PMC-Sierra MSP7120 FPGA"
-	select SYS_SUPPORTS_MULTITHREADING
-	select IRQ_MSP_CIC
-	select HAVE_PCI
-
-endchoice
-
-config MSP_HAS_USB
-	bool
-	depends on PMC_MSP
-
-config MSP_ETH
-	bool
-	select MSP_HAS_MAC
-	depends on PMC_MSP
-
-config MSP_HAS_MAC
-	bool
-	depends on PMC_MSP
diff --git a/arch/mips/pmcs-msp71xx/Makefile b/arch/mips/pmcs-msp71xx/Makefile
deleted file mode 100644
index c040bd6ed62d..000000000000
--- a/arch/mips/pmcs-msp71xx/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the PMC-Sierra MSP SOCs
-#
-obj-y += msp_prom.o msp_setup.o msp_irq.o \
-	 msp_time.o msp_serial.o msp_elb.o
-obj-$(CONFIG_PMC_MSP7120_GW) += msp_hwbutton.o
-obj-$(CONFIG_IRQ_MSP_SLP) += msp_irq_slp.o
-obj-$(CONFIG_IRQ_MSP_CIC) += msp_irq_cic.o msp_irq_per.o
-obj-$(CONFIG_PCI) += msp_pci.o
-obj-$(CONFIG_MSP_HAS_MAC) += msp_eth.o
-obj-$(CONFIG_MSP_HAS_USB) += msp_usb.o
-obj-$(CONFIG_MIPS_MT_SMP) += msp_smp.o
diff --git a/arch/mips/pmcs-msp71xx/Platform b/arch/mips/pmcs-msp71xx/Platform
deleted file mode 100644
index 7af0734a5007..000000000000
--- a/arch/mips/pmcs-msp71xx/Platform
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# PMC-Sierra MSP SOCs
-#
-platform-$(CONFIG_PMC_MSP)	+= pmcs-msp71xx/
-cflags-$(CONFIG_PMC_MSP)	+= -I$(srctree)/arch/mips/include/asm/mach-pmcs-msp71xx \
-					-mno-branch-likely
-load-$(CONFIG_PMC_MSP)		+= 0xffffffff80100000
diff --git a/arch/mips/pmcs-msp71xx/msp_elb.c b/arch/mips/pmcs-msp71xx/msp_elb.c
deleted file mode 100644
index 3e9641007216..000000000000
--- a/arch/mips/pmcs-msp71xx/msp_elb.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * Sets up the proper Chip Select configuration registers.  It is assumed that
- * PMON sets up the ADDR and MASK registers properly.
- *
- * Copyright 2005-2006 PMC-Sierra, Inc.
- * Author: Marc St-Jean, Marc_St-Jean@pmc-sierra.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <msp_regs.h>
-
-static int __init msp_elb_setup(void)
-{
-#if defined(CONFIG_PMC_MSP7120_GW) \
- || defined(CONFIG_PMC_MSP7120_EVAL)
-	/*
-	 * Force all CNFG to be identical and equal to CS0,
-	 * according to OPS doc
-	 */
-	*CS1_CNFG_REG = *CS2_CNFG_REG = *CS3_CNFG_REG = *CS0_CNFG_REG;
-#endif
-	return 0;
-}
-
-subsys_initcall(msp_elb_setup);
diff --git a/arch/mips/pmcs-msp71xx/msp_eth.c b/arch/mips/pmcs-msp71xx/msp_eth.c
deleted file mode 100644
index 15679b427f44..000000000000
--- a/arch/mips/pmcs-msp71xx/msp_eth.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * The setup file for ethernet related hardware on PMC-Sierra MSP processors.
- *
- * Copyright 2010 PMC-Sierra, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <msp_regs.h>
-#include <msp_int.h>
-#include <msp_gpio_macros.h>
-
-
-#define MSP_ETHERNET_GPIO0	14
-#define MSP_ETHERNET_GPIO1	15
-#define MSP_ETHERNET_GPIO2	16
-
-#define MSP_ETH_ID	"pmc_mspeth"
-#define MSP_ETH_SIZE	0xE0
-static struct resource msp_eth0_resources[] = {
-	[0] = {
-		.start	= MSP_MAC0_BASE,
-		.end	= MSP_MAC0_BASE + MSP_ETH_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= MSP_INT_MAC0,
-		.end	= MSP_INT_MAC0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource msp_eth1_resources[] = {
-	[0] = {
-		.start	= MSP_MAC1_BASE,
-		.end	= MSP_MAC1_BASE + MSP_ETH_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= MSP_INT_MAC1,
-		.end	= MSP_INT_MAC1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-
-
-static struct platform_device mspeth_device[] = {
-	[0] = {
-		.name	= MSP_ETH_ID,
-		.id	= 0,
-		.num_resources = ARRAY_SIZE(msp_eth0_resources),
-		.resource = msp_eth0_resources,
-	},
-	[1] = {
-		.name	= MSP_ETH_ID,
-		.id	= 1,
-		.num_resources = ARRAY_SIZE(msp_eth1_resources),
-		.resource = msp_eth1_resources,
-	},
-
-};
-#define msp_eth_devs	mspeth_device
-
-int __init msp_eth_setup(void)
-{
-	int i, ret = 0;
-
-	/* Configure the GPIO and take the ethernet PHY out of reset */
-	msp_gpio_pin_mode(MSP_GPIO_OUTPUT, MSP_ETHERNET_GPIO0);
-	msp_gpio_pin_hi(MSP_ETHERNET_GPIO0);
-
-	for (i = 0; i < ARRAY_SIZE(msp_eth_devs); i++) {
-		ret = platform_device_register(&msp_eth_devs[i]);
-		printk(KERN_INFO "device: %d, return value = %d\n", i, ret);
-		if (ret) {
-			platform_device_unregister(&msp_eth_devs[i]);
-			break;
-		}
-	}
-
-	if (ret)
-		printk(KERN_WARNING "Could not initialize "
-						"MSPETH device structures.\n");
-
-	return ret;
-}
-subsys_initcall(msp_eth_setup);
diff --git a/arch/mips/pmcs-msp71xx/msp_hwbutton.c b/arch/mips/pmcs-msp71xx/msp_hwbutton.c
deleted file mode 100644
index bb57ed9ea2bd..000000000000
--- a/arch/mips/pmcs-msp71xx/msp_hwbutton.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * Sets up interrupt handlers for various hardware switches which are
- * connected to interrupt lines.
- *
- * Copyright 2005-2207 PMC-Sierra, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-
-#include <msp_int.h>
-#include <msp_regs.h>
-#include <msp_regops.h>
-
-/* For hwbutton_interrupt->initial_state */
-#define HWBUTTON_HI	0x1
-#define HWBUTTON_LO	0x2
-
-/*
- * This struct describes a hardware button
- */
-struct hwbutton_interrupt {
-	char *name;			/* Name of button */
-	int irq;			/* Actual LINUX IRQ */
-	int eirq;			/* Extended IRQ number (0-7) */
-	int initial_state;		/* The "normal" state of the switch */
-	void (*handle_hi)(void *);	/* Handler: switch input has gone HI */
-	void (*handle_lo)(void *);	/* Handler: switch input has gone LO */
-	void *data;			/* Optional data to pass to handler */
-};
-
-#ifdef CONFIG_PMC_MSP7120_GW
-extern void msp_restart(char *);
-
-static void softreset_push(void *data)
-{
-	printk(KERN_WARNING "SOFTRESET switch was pushed\n");
-
-	/*
-	 * In the future you could move this to the release handler,
-	 * timing the difference between the 'push' and 'release', and only
-	 * doing this ungraceful restart if the button has been down for
-	 * a certain amount of time; otherwise doing a graceful restart.
-	 */
-
-	msp_restart(NULL);
-}
-
-static void softreset_release(void *data)
-{
-	printk(KERN_WARNING "SOFTRESET switch was released\n");
-
-	/* Do nothing */
-}
-
-static void standby_on(void *data)
-{
-	printk(KERN_WARNING "STANDBY switch was set to ON (not implemented)\n");
-
-	/* TODO: Put board in standby mode */
-}
-
-static void standby_off(void *data)
-{
-	printk(KERN_WARNING
-		"STANDBY switch was set to OFF (not implemented)\n");
-
-	/* TODO: Take out of standby mode */
-}
-
-static struct hwbutton_interrupt softreset_sw = {
-	.name = "Softreset button",
-	.irq = MSP_INT_EXT0,
-	.eirq = 0,
-	.initial_state = HWBUTTON_HI,
-	.handle_hi = softreset_release,
-	.handle_lo = softreset_push,
-	.data = NULL,
-};
-
-static struct hwbutton_interrupt standby_sw = {
-	.name = "Standby switch",
-	.irq = MSP_INT_EXT1,
-	.eirq = 1,
-	.initial_state = HWBUTTON_HI,
-	.handle_hi = standby_off,
-	.handle_lo = standby_on,
-	.data = NULL,
-};
-#endif /* CONFIG_PMC_MSP7120_GW */
-
-static irqreturn_t hwbutton_handler(int irq, void *data)
-{
-	struct hwbutton_interrupt *hirq = data;
-	unsigned long cic_ext = *CIC_EXT_CFG_REG;
-
-	if (CIC_EXT_IS_ACTIVE_HI(cic_ext, hirq->eirq)) {
-		/* Interrupt: pin is now HI */
-		CIC_EXT_SET_ACTIVE_LO(cic_ext, hirq->eirq);
-		hirq->handle_hi(hirq->data);
-	} else {
-		/* Interrupt: pin is now LO */
-		CIC_EXT_SET_ACTIVE_HI(cic_ext, hirq->eirq);
-		hirq->handle_lo(hirq->data);
-	}
-
-	/*
-	 * Invert the POLARITY of this level interrupt to ack the interrupt
-	 * Thus next state change will invoke the opposite message
-	 */
-	*CIC_EXT_CFG_REG = cic_ext;
-
-	return IRQ_HANDLED;
-}
-
-static int msp_hwbutton_register(struct hwbutton_interrupt *hirq)
-{
-	unsigned long cic_ext;
-
-	if (hirq->handle_hi == NULL || hirq->handle_lo == NULL)
-		return -EINVAL;
-
-	cic_ext = *CIC_EXT_CFG_REG;
-	CIC_EXT_SET_TRIGGER_LEVEL(cic_ext, hirq->eirq);
-	if (hirq->initial_state == HWBUTTON_HI)
-		CIC_EXT_SET_ACTIVE_LO(cic_ext, hirq->eirq);
-	else
-		CIC_EXT_SET_ACTIVE_HI(cic_ext, hirq->eirq);
-	*CIC_EXT_CFG_REG = cic_ext;
-
-	return request_irq(hirq->irq, hwbutton_handler, 0,
-			   hirq->name, hirq);
-}
-
-static int __init msp_hwbutton_setup(void)
-{
-#ifdef CONFIG_PMC_MSP7120_GW
-	msp_hwbutton_register(&softreset_sw);
-	msp_hwbutton_register(&standby_sw);
-#endif
-	return 0;
-}
-
-subsys_initcall(msp_hwbutton_setup);
diff --git a/arch/mips/pmcs-msp71xx/msp_irq.c b/arch/mips/pmcs-msp71xx/msp_irq.c
deleted file mode 100644
index d525cc931d89..000000000000
--- a/arch/mips/pmcs-msp71xx/msp_irq.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * IRQ vector handles
- *
- * Copyright (C) 1995, 1996, 1997, 2003 by Ralf Baechle
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/ptrace.h>
-#include <linux/time.h>
-
-#include <asm/irq_cpu.h>
-#include <asm/setup.h>
-
-#include <msp_int.h>
-
-/* SLP bases systems */
-extern void msp_slp_irq_init(void);
-extern void msp_slp_irq_dispatch(void);
-
-/* CIC based systems */
-extern void msp_cic_irq_init(void);
-extern void msp_cic_irq_dispatch(void);
-
-/* VSMP support init */
-extern void msp_vsmp_int_init(void);
-
-/* vectored interrupt implementation */
-
-/* SW0/1 interrupts are used for SMP  */
-static inline void mac0_int_dispatch(void) { do_IRQ(MSP_INT_MAC0); }
-static inline void mac1_int_dispatch(void) { do_IRQ(MSP_INT_MAC1); }
-static inline void mac2_int_dispatch(void) { do_IRQ(MSP_INT_SAR); }
-static inline void usb_int_dispatch(void)  { do_IRQ(MSP_INT_USB);  }
-static inline void sec_int_dispatch(void)  { do_IRQ(MSP_INT_SEC);  }
-
-/*
- * The PMC-Sierra MSP interrupts are arranged in a 3 level cascaded
- * hierarchical system.	 The first level are the direct MIPS interrupts
- * and are assigned the interrupt range 0-7.  The second level is the SLM
- * interrupt controller and is assigned the range 8-39.	 The third level
- * comprises the Peripherial block, the PCI block, the PCI MSI block and
- * the SLP.  The PCI interrupts and the SLP errors are handled by the
- * relevant subsystems so the core interrupt code needs only concern
- * itself with the Peripheral block.  These are assigned interrupts in
- * the range 40-71.
- */
-
-asmlinkage void plat_irq_dispatch(void)
-{
-	u32 pending;
-
-	pending = read_c0_status() & read_c0_cause();
-
-	/*
-	 * jump to the correct interrupt routine
-	 * These are arranged in priority order and the timer
-	 * comes first!
-	 */
-
-#ifdef CONFIG_IRQ_MSP_CIC	/* break out the CIC stuff for now */
-	if (pending & C_IRQ4)	/* do the peripherals first, that's the timer */
-		msp_cic_irq_dispatch();
-
-	else if (pending & C_IRQ0)
-		do_IRQ(MSP_INT_MAC0);
-
-	else if (pending & C_IRQ1)
-		do_IRQ(MSP_INT_MAC1);
-
-	else if (pending & C_IRQ2)
-		do_IRQ(MSP_INT_USB);
-
-	else if (pending & C_IRQ3)
-		do_IRQ(MSP_INT_SAR);
-
-	else if (pending & C_IRQ5)
-		do_IRQ(MSP_INT_SEC);
-
-#else
-	if (pending & C_IRQ5)
-		do_IRQ(MSP_INT_TIMER);
-
-	else if (pending & C_IRQ0)
-		do_IRQ(MSP_INT_MAC0);
-
-	else if (pending & C_IRQ1)
-		do_IRQ(MSP_INT_MAC1);
-
-	else if (pending & C_IRQ3)
-		do_IRQ(MSP_INT_VE);
-
-	else if (pending & C_IRQ4)
-		msp_slp_irq_dispatch();
-#endif
-
-	else if (pending & C_SW0)	/* do software after hardware */
-		do_IRQ(MSP_INT_SW0);
-
-	else if (pending & C_SW1)
-		do_IRQ(MSP_INT_SW1);
-}
-
-void __init arch_init_irq(void)
-{
-	/* assume we'll be using vectored interrupt mode except in UP mode*/
-#ifdef CONFIG_MIPS_MT
-	BUG_ON(!cpu_has_vint);
-#endif
-	/* initialize the 1st-level CPU based interrupt controller */
-	mips_cpu_irq_init();
-
-#ifdef CONFIG_IRQ_MSP_CIC
-	msp_cic_irq_init();
-#ifdef CONFIG_MIPS_MT
-	set_vi_handler(MSP_INT_CIC, msp_cic_irq_dispatch);
-	set_vi_handler(MSP_INT_MAC0, mac0_int_dispatch);
-	set_vi_handler(MSP_INT_MAC1, mac1_int_dispatch);
-	set_vi_handler(MSP_INT_SAR, mac2_int_dispatch);
-	set_vi_handler(MSP_INT_USB, usb_int_dispatch);
-	set_vi_handler(MSP_INT_SEC, sec_int_dispatch);
-#ifdef CONFIG_MIPS_MT_SMP
-	msp_vsmp_int_init();
-#endif	/* CONFIG_MIPS_MT_SMP */
-#endif	/* CONFIG_MIPS_MT */
-	/* setup the cascaded interrupts */
-	if (request_irq(MSP_INT_CIC, no_action, IRQF_NO_THREAD,
-			"MSP CIC cascade", NULL))
-		pr_err("Failed to register MSP CIC cascade interrupt\n");
-	if (request_irq(MSP_INT_PER, no_action, IRQF_NO_THREAD,
-			"MSP PER cascade", NULL))
-		pr_err("Failed to register MSP PER cascade interrupt\n");
-
-#else
-	/*
-	 * Setup the 2nd-level SLP register based interrupt controller.
-	 * VSMP support support is not enabled for SLP.
-	 */
-	msp_slp_irq_init();
-
-	/* setup the cascaded SLP/PER interrupts */
-	if (request_irq(MSP_INT_SLP, no_action, IRQF_NO_THREAD,
-			"MSP CIC cascade", NULL))
-		pr_err("Failed to register MSP CIC cascade interrupt\n");
-	if (request_irq(MSP_INT_PER, no_action, IRQF_NO_THREAD,
-			"MSP PER cascade", NULL))
-		pr_err("Failed to register MSP PER cascade interrupt\n");
-#endif
-}
diff --git a/arch/mips/pmcs-msp71xx/msp_irq_cic.c b/arch/mips/pmcs-msp71xx/msp_irq_cic.c
deleted file mode 100644
index 0706010cc99f..000000000000
--- a/arch/mips/pmcs-msp71xx/msp_irq_cic.c
+++ /dev/null
@@ -1,208 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2010 PMC-Sierra, Inc, derived from irq_cpu.c
- *
- * This file define the irq handler for MSP CIC subsystem interrupts.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/bitops.h>
-#include <linux/irq.h>
-
-#include <asm/mipsregs.h>
-
-#include <msp_cic_int.h>
-#include <msp_regs.h>
-
-/*
- * External API
- */
-extern void msp_per_irq_init(void);
-extern void msp_per_irq_dispatch(void);
-
-
-/*
- * Convenience Macro.  Should be somewhere generic.
- */
-#define get_current_vpe()   \
-	((read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE)
-
-#ifdef CONFIG_SMP
-
-#define LOCK_VPE(flags, mtflags) \
-do {				\
-	local_irq_save(flags);	\
-	mtflags = dmt();	\
-} while (0)
-
-#define UNLOCK_VPE(flags, mtflags) \
-do {				\
-	emt(mtflags);		\
-	local_irq_restore(flags);\
-} while (0)
-
-#define LOCK_CORE(flags, mtflags) \
-do {				\
-	local_irq_save(flags);	\
-	mtflags = dvpe();	\
-} while (0)
-
-#define UNLOCK_CORE(flags, mtflags)		\
-do {				\
-	evpe(mtflags);		\
-	local_irq_restore(flags);\
-} while (0)
-
-#else
-
-#define LOCK_VPE(flags, mtflags)
-#define UNLOCK_VPE(flags, mtflags)
-#endif
-
-/* ensure writes to cic are completed */
-static inline void cic_wmb(void)
-{
-	const volatile void __iomem *cic_mem = CIC_VPE0_MSK_REG;
-	volatile u32 dummy_read;
-
-	wmb();
-	dummy_read = __raw_readl(cic_mem);
-	dummy_read++;
-}
-
-static void unmask_cic_irq(struct irq_data *d)
-{
-	volatile u32   *cic_msk_reg = CIC_VPE0_MSK_REG;
-	int vpe;
-#ifdef CONFIG_SMP
-	unsigned int mtflags;
-	unsigned long  flags;
-
-	/*
-	* Make sure we have IRQ affinity.  It may have changed while
-	* we were processing the IRQ.
-	*/
-	if (!cpumask_test_cpu(smp_processor_id(),
-			      irq_data_get_affinity_mask(d)))
-		return;
-#endif
-
-	vpe = get_current_vpe();
-	LOCK_VPE(flags, mtflags);
-	cic_msk_reg[vpe] |= (1 << (d->irq - MSP_CIC_INTBASE));
-	UNLOCK_VPE(flags, mtflags);
-	cic_wmb();
-}
-
-static void mask_cic_irq(struct irq_data *d)
-{
-	volatile u32 *cic_msk_reg = CIC_VPE0_MSK_REG;
-	int	vpe = get_current_vpe();
-#ifdef CONFIG_SMP
-	unsigned long flags, mtflags;
-#endif
-	LOCK_VPE(flags, mtflags);
-	cic_msk_reg[vpe] &= ~(1 << (d->irq - MSP_CIC_INTBASE));
-	UNLOCK_VPE(flags, mtflags);
-	cic_wmb();
-}
-static void msp_cic_irq_ack(struct irq_data *d)
-{
-	mask_cic_irq(d);
-	/*
-	* Only really necessary for 18, 16-14 and sometimes 3:0
-	* (since these can be edge sensitive) but it doesn't
-	* hurt for the others
-	*/
-	*CIC_STS_REG = (1 << (d->irq - MSP_CIC_INTBASE));
-}
-
-/* Note: Limiting to VSMP.  */
-
-#ifdef CONFIG_MIPS_MT_SMP
-static int msp_cic_irq_set_affinity(struct irq_data *d,
-				    const struct cpumask *cpumask, bool force)
-{
-	int cpu;
-	unsigned long flags;
-	unsigned int  mtflags;
-	unsigned long imask = (1 << (d->irq - MSP_CIC_INTBASE));
-	volatile u32 *cic_mask = (volatile u32 *)CIC_VPE0_MSK_REG;
-
-	/* timer balancing should be disabled in kernel code */
-	BUG_ON(d->irq == MSP_INT_VPE0_TIMER || d->irq == MSP_INT_VPE1_TIMER);
-
-	LOCK_CORE(flags, mtflags);
-	/* enable if any of each VPE's TCs require this IRQ */
-	for_each_online_cpu(cpu) {
-		if (cpumask_test_cpu(cpu, cpumask))
-			cic_mask[cpu] |= imask;
-		else
-			cic_mask[cpu] &= ~imask;
-
-	}
-
-	UNLOCK_CORE(flags, mtflags);
-	return 0;
-
-}
-#endif
-
-static struct irq_chip msp_cic_irq_controller = {
-	.name = "MSP_CIC",
-	.irq_mask = mask_cic_irq,
-	.irq_mask_ack = msp_cic_irq_ack,
-	.irq_unmask = unmask_cic_irq,
-	.irq_ack = msp_cic_irq_ack,
-#ifdef CONFIG_MIPS_MT_SMP
-	.irq_set_affinity = msp_cic_irq_set_affinity,
-#endif
-};
-
-void __init msp_cic_irq_init(void)
-{
-	int i;
-	/* Mask/clear interrupts. */
-	*CIC_VPE0_MSK_REG = 0x00000000;
-	*CIC_VPE1_MSK_REG = 0x00000000;
-	*CIC_STS_REG	  = 0xFFFFFFFF;
-	/*
-	* The MSP7120 RG and EVBD boards use IRQ[6:4] for PCI.
-	* These inputs map to EXT_INT_POL[6:4] inside the CIC.
-	* They are to be active low, level sensitive.
-	*/
-	*CIC_EXT_CFG_REG &= 0xFFFF8F8F;
-
-	/* initialize all the IRQ descriptors */
-	for (i = MSP_CIC_INTBASE ; i < MSP_CIC_INTBASE + 32 ; i++) {
-		irq_set_chip_and_handler(i, &msp_cic_irq_controller,
-					 handle_level_irq);
-	}
-
-	/* Initialize the PER interrupt sub-system */
-	 msp_per_irq_init();
-}
-
-/* CIC masked by CIC vector processing before dispatch called */
-void msp_cic_irq_dispatch(void)
-{
-	volatile u32	*cic_msk_reg = (volatile u32 *)CIC_VPE0_MSK_REG;
-	u32	cic_mask;
-	u32	 pending;
-	int	cic_status = *CIC_STS_REG;
-	cic_mask = cic_msk_reg[get_current_vpe()];
-	pending = cic_status & cic_mask;
-	if (pending & (1 << (MSP_INT_VPE0_TIMER - MSP_CIC_INTBASE))) {
-		do_IRQ(MSP_INT_VPE0_TIMER);
-	} else if (pending & (1 << (MSP_INT_VPE1_TIMER - MSP_CIC_INTBASE))) {
-		do_IRQ(MSP_INT_VPE1_TIMER);
-	} else if (pending & (1 << (MSP_INT_PER - MSP_CIC_INTBASE))) {
-		msp_per_irq_dispatch();
-	} else if (pending) {
-		do_IRQ(ffs(pending) + MSP_CIC_INTBASE - 1);
-	} else{
-		spurious_interrupt();
-	}
-}
diff --git a/arch/mips/pmcs-msp71xx/msp_irq_per.c b/arch/mips/pmcs-msp71xx/msp_irq_per.c
deleted file mode 100644
index b284412b2923..000000000000
--- a/arch/mips/pmcs-msp71xx/msp_irq_per.c
+++ /dev/null
@@ -1,127 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2010 PMC-Sierra, Inc, derived from irq_cpu.c
- *
- * This file define the irq handler for MSP PER subsystem interrupts.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/spinlock.h>
-#include <linux/bitops.h>
-
-#include <asm/mipsregs.h>
-
-#include <msp_cic_int.h>
-#include <msp_regs.h>
-
-
-/*
- * Convenience Macro.  Should be somewhere generic.
- */
-#define get_current_vpe()	\
-	((read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE)
-
-#ifdef CONFIG_SMP
-/*
- * The PER registers must be protected from concurrent access.
- */
-
-static DEFINE_SPINLOCK(per_lock);
-#endif
-
-/* ensure writes to per are completed */
-
-static inline void per_wmb(void)
-{
-	const volatile void __iomem *per_mem = PER_INT_MSK_REG;
-	volatile u32 dummy_read;
-
-	wmb();
-	dummy_read = __raw_readl(per_mem);
-	dummy_read++;
-}
-
-static inline void unmask_per_irq(struct irq_data *d)
-{
-#ifdef CONFIG_SMP
-	unsigned long flags;
-	spin_lock_irqsave(&per_lock, flags);
-	*PER_INT_MSK_REG |= (1 << (d->irq - MSP_PER_INTBASE));
-	spin_unlock_irqrestore(&per_lock, flags);
-#else
-	*PER_INT_MSK_REG |= (1 << (d->irq - MSP_PER_INTBASE));
-#endif
-	per_wmb();
-}
-
-static inline void mask_per_irq(struct irq_data *d)
-{
-#ifdef CONFIG_SMP
-	unsigned long flags;
-	spin_lock_irqsave(&per_lock, flags);
-	*PER_INT_MSK_REG &= ~(1 << (d->irq - MSP_PER_INTBASE));
-	spin_unlock_irqrestore(&per_lock, flags);
-#else
-	*PER_INT_MSK_REG &= ~(1 << (d->irq - MSP_PER_INTBASE));
-#endif
-	per_wmb();
-}
-
-static inline void msp_per_irq_ack(struct irq_data *d)
-{
-	mask_per_irq(d);
-	/*
-	 * In the PER interrupt controller, only bits 11 and 10
-	 * are write-to-clear, (SPI TX complete, SPI RX complete).
-	 * It does nothing for any others.
-	 */
-	*PER_INT_STS_REG = (1 << (d->irq - MSP_PER_INTBASE));
-}
-
-#ifdef CONFIG_SMP
-static int msp_per_irq_set_affinity(struct irq_data *d,
-				    const struct cpumask *affinity, bool force)
-{
-	/* WTF is this doing ????? */
-	unmask_per_irq(d);
-	return 0;
-}
-#endif
-
-static struct irq_chip msp_per_irq_controller = {
-	.name = "MSP_PER",
-	.irq_enable = unmask_per_irq,
-	.irq_disable = mask_per_irq,
-	.irq_ack = msp_per_irq_ack,
-#ifdef CONFIG_SMP
-	.irq_set_affinity = msp_per_irq_set_affinity,
-#endif
-};
-
-void __init msp_per_irq_init(void)
-{
-	int i;
-	/* Mask/clear interrupts. */
-	*PER_INT_MSK_REG  = 0x00000000;
-	*PER_INT_STS_REG  = 0xFFFFFFFF;
-	/* initialize all the IRQ descriptors */
-	for (i = MSP_PER_INTBASE; i < MSP_PER_INTBASE + 32; i++) {
-		irq_set_chip(i, &msp_per_irq_controller);
-	}
-}
-
-void msp_per_irq_dispatch(void)
-{
-	u32	per_mask = *PER_INT_MSK_REG;
-	u32	per_status = *PER_INT_STS_REG;
-	u32	pending;
-
-	pending = per_status & per_mask;
-	if (pending) {
-		do_IRQ(ffs(pending) + MSP_PER_INTBASE - 1);
-	} else {
-		spurious_interrupt();
-	}
-}
diff --git a/arch/mips/pmcs-msp71xx/msp_irq_slp.c b/arch/mips/pmcs-msp71xx/msp_irq_slp.c
deleted file mode 100644
index 097a5fd3b06b..000000000000
--- a/arch/mips/pmcs-msp71xx/msp_irq_slp.c
+++ /dev/null
@@ -1,102 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * This file define the irq handler for MSP SLM subsystem interrupts.
- *
- * Copyright 2005-2006 PMC-Sierra, Inc, derived from irq_cpu.c
- * Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/bitops.h>
-
-#include <asm/mipsregs.h>
-
-#include <msp_slp_int.h>
-#include <msp_regs.h>
-
-static inline void unmask_msp_slp_irq(struct irq_data *d)
-{
-	unsigned int irq = d->irq;
-
-	/* check for PER interrupt range */
-	if (irq < MSP_PER_INTBASE)
-		*SLP_INT_MSK_REG |= (1 << (irq - MSP_SLP_INTBASE));
-	else
-		*PER_INT_MSK_REG |= (1 << (irq - MSP_PER_INTBASE));
-}
-
-static inline void mask_msp_slp_irq(struct irq_data *d)
-{
-	unsigned int irq = d->irq;
-
-	/* check for PER interrupt range */
-	if (irq < MSP_PER_INTBASE)
-		*SLP_INT_MSK_REG &= ~(1 << (irq - MSP_SLP_INTBASE));
-	else
-		*PER_INT_MSK_REG &= ~(1 << (irq - MSP_PER_INTBASE));
-}
-
-/*
- * While we ack the interrupt interrupts are disabled and thus we don't need
- * to deal with concurrency issues.  Same for msp_slp_irq_end.
- */
-static inline void ack_msp_slp_irq(struct irq_data *d)
-{
-	unsigned int irq = d->irq;
-
-	/* check for PER interrupt range */
-	if (irq < MSP_PER_INTBASE)
-		*SLP_INT_STS_REG = (1 << (irq - MSP_SLP_INTBASE));
-	else
-		*PER_INT_STS_REG = (1 << (irq - MSP_PER_INTBASE));
-}
-
-static struct irq_chip msp_slp_irq_controller = {
-	.name = "MSP_SLP",
-	.irq_ack = ack_msp_slp_irq,
-	.irq_mask = mask_msp_slp_irq,
-	.irq_unmask = unmask_msp_slp_irq,
-};
-
-void __init msp_slp_irq_init(void)
-{
-	int i;
-
-	/* Mask/clear interrupts. */
-	*SLP_INT_MSK_REG = 0x00000000;
-	*PER_INT_MSK_REG = 0x00000000;
-	*SLP_INT_STS_REG = 0xFFFFFFFF;
-	*PER_INT_STS_REG = 0xFFFFFFFF;
-
-	/* initialize all the IRQ descriptors */
-	for (i = MSP_SLP_INTBASE; i < MSP_PER_INTBASE + 32; i++)
-		irq_set_chip_and_handler(i, &msp_slp_irq_controller,
-					 handle_level_irq);
-}
-
-void msp_slp_irq_dispatch(void)
-{
-	u32 pending;
-	int intbase;
-
-	intbase = MSP_SLP_INTBASE;
-	pending = *SLP_INT_STS_REG & *SLP_INT_MSK_REG;
-
-	/* check for PER interrupt */
-	if (pending == (1 << (MSP_INT_PER - MSP_SLP_INTBASE))) {
-		intbase = MSP_PER_INTBASE;
-		pending = *PER_INT_STS_REG & *PER_INT_MSK_REG;
-	}
-
-	/* check for spurious interrupt */
-	if (pending == 0x00000000) {
-		printk(KERN_ERR "Spurious %s interrupt?\n",
-			(intbase == MSP_SLP_INTBASE) ? "SLP" : "PER");
-		return;
-	}
-
-	/* dispatch the irq */
-	do_IRQ(ffs(pending) + intbase - 1);
-}
diff --git a/arch/mips/pmcs-msp71xx/msp_pci.c b/arch/mips/pmcs-msp71xx/msp_pci.c
deleted file mode 100644
index 428dea23c35c..000000000000
--- a/arch/mips/pmcs-msp71xx/msp_pci.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * The setup file for PCI related hardware on PMC-Sierra MSP processors.
- *
- * Copyright 2005-2006 PMC-Sierra, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-
-#include <msp_prom.h>
-#include <msp_regs.h>
-
-extern void msp_pci_init(void);
-
-static int __init msp_pci_setup(void)
-{
-#if 0 /* Linux 2.6 initialization code to be completed */
-	if (getdeviceid() & DEV_ID_SINGLE_PC) {
-		/* If single card mode */
-		slmRegs *sreg = (slmRegs *) SREG_BASE;
-
-		sreg->single_pc_enable = SINGLE_PCCARD;
-	}
-#endif
-
-	msp_pci_init();
-
-	return 0;
-}
-
-subsys_initcall(msp_pci_setup);
diff --git a/arch/mips/pmcs-msp71xx/msp_prom.c b/arch/mips/pmcs-msp71xx/msp_prom.c
deleted file mode 100644
index 800a21b8b8b0..000000000000
--- a/arch/mips/pmcs-msp71xx/msp_prom.c
+++ /dev/null
@@ -1,513 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- *    PROM library initialisation code, assuming a version of
- *    pmon is the boot code.
- *
- * Copyright 2000,2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *         	ppopov@mvista.com or source@mvista.com
- *
- * This file was derived from Carsten Langgaard's
- * arch/mips/mips-boards/xx files.
- *
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/export.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/interrupt.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-#include <asm-generic/sections.h>
-#include <asm/page.h>
-
-#include <msp_prom.h>
-#include <msp_regs.h>
-
-/* global PROM environment variables and pointers */
-int prom_argc;
-char **prom_argv, **prom_envp;
-int *prom_vec;
-
-/* debug flag */
-int init_debug = 1;
-
-/* memory blocks */
-struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS];
-
-#define MAX_PROM_MEM 5
-static phys_addr_t prom_mem_base[MAX_PROM_MEM] __initdata;
-static phys_addr_t prom_mem_size[MAX_PROM_MEM] __initdata;
-static unsigned int nr_prom_mem __initdata;
-
-/* default feature sets */
-static char msp_default_features[] =
-#if defined(CONFIG_PMC_MSP4200_EVAL) \
- || defined(CONFIG_PMC_MSP4200_GW)
-	"ERER";
-#elif defined(CONFIG_PMC_MSP7120_EVAL) \
- || defined(CONFIG_PMC_MSP7120_GW)
-	"EMEMSP";
-#elif defined(CONFIG_PMC_MSP7120_FPGA)
-	"EMEM";
-#endif
-
-/* conversion functions */
-static inline unsigned char str2hexnum(unsigned char c)
-{
-	if (c >= '0' && c <= '9')
-		return c - '0';
-	if (c >= 'a' && c <= 'f')
-		return c - 'a' + 10;
-	return 0; /* foo */
-}
-
-int str2eaddr(unsigned char *ea, unsigned char *str)
-{
-	int index = 0;
-	unsigned char num = 0;
-
-	while (*str != '\0') {
-		if ((*str == '.') || (*str == ':')) {
-			ea[index++] = num;
-			num = 0;
-			str++;
-		} else {
-			num = num << 4;
-			num |= str2hexnum(*str++);
-		}
-	}
-
-	if (index == 5) {
-		ea[index++] = num;
-		return 0;
-	} else
-		return -1;
-}
-EXPORT_SYMBOL(str2eaddr);
-
-static inline unsigned long str2hex(unsigned char *str)
-{
-	int value = 0;
-
-	while (*str) {
-		value = value << 4;
-		value |= str2hexnum(*str++);
-	}
-
-	return value;
-}
-
-/* function to query the system information */
-const char *get_system_type(void)
-{
-#if defined(CONFIG_PMC_MSP4200_EVAL)
-	return "PMC-Sierra MSP4200 Eval Board";
-#elif defined(CONFIG_PMC_MSP4200_GW)
-	return "PMC-Sierra MSP4200 VoIP Gateway";
-#elif defined(CONFIG_PMC_MSP7120_EVAL)
-	return "PMC-Sierra MSP7120 Eval Board";
-#elif defined(CONFIG_PMC_MSP7120_GW)
-	return "PMC-Sierra MSP7120 Residential Gateway";
-#elif defined(CONFIG_PMC_MSP7120_FPGA)
-	return "PMC-Sierra MSP7120 FPGA";
-#else
-	#error "What is the type of *your* MSP?"
-#endif
-}
-
-int get_ethernet_addr(char *ethaddr_name, char *ethernet_addr)
-{
-	char *ethaddr_str;
-
-	ethaddr_str = prom_getenv(ethaddr_name);
-	if (!ethaddr_str) {
-		printk(KERN_WARNING "%s not set in boot prom\n", ethaddr_name);
-		return -1;
-	}
-
-	if (str2eaddr(ethernet_addr, ethaddr_str) == -1) {
-		printk(KERN_WARNING "%s badly formatted-<%s>\n",
-			ethaddr_name, ethaddr_str);
-		return -1;
-	}
-
-	if (init_debug > 1) {
-		int i;
-		printk(KERN_DEBUG "get_ethernet_addr: for %s ", ethaddr_name);
-		for (i = 0; i < 5; i++)
-			printk(KERN_DEBUG "%02x:",
-				(unsigned char)*(ethernet_addr+i));
-		printk(KERN_DEBUG "%02x\n", *(ethernet_addr+i));
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(get_ethernet_addr);
-
-static char *get_features(void)
-{
-	char *feature = prom_getenv(FEATURES);
-
-	if (feature == NULL) {
-		/* default features based on MACHINE_TYPE */
-		feature = msp_default_features;
-	}
-
-	return feature;
-}
-
-static char test_feature(char c)
-{
-	char *feature = get_features();
-
-	while (*feature) {
-		if (*feature++ == c)
-			return *feature;
-		feature++;
-	}
-
-	return FEATURE_NOEXIST;
-}
-
-unsigned long get_deviceid(void)
-{
-	char *deviceid = prom_getenv(DEVICEID);
-
-	if (deviceid == NULL)
-		return *DEV_ID_REG;
-	else
-		return str2hex(deviceid);
-}
-
-char identify_pci(void)
-{
-	return test_feature(PCI_KEY);
-}
-EXPORT_SYMBOL(identify_pci);
-
-char identify_pcimux(void)
-{
-	return test_feature(PCIMUX_KEY);
-}
-
-char identify_sec(void)
-{
-	return test_feature(SEC_KEY);
-}
-EXPORT_SYMBOL(identify_sec);
-
-char identify_spad(void)
-{
-	return test_feature(SPAD_KEY);
-}
-EXPORT_SYMBOL(identify_spad);
-
-char identify_tdm(void)
-{
-	return test_feature(TDM_KEY);
-}
-EXPORT_SYMBOL(identify_tdm);
-
-char identify_zsp(void)
-{
-	return test_feature(ZSP_KEY);
-}
-EXPORT_SYMBOL(identify_zsp);
-
-static char identify_enetfeature(char key, unsigned long interface_num)
-{
-	char *feature = get_features();
-
-	while (*feature) {
-		if (*feature++ == key && interface_num-- == 0)
-			return *feature;
-		feature++;
-	}
-
-	return FEATURE_NOEXIST;
-}
-
-char identify_enet(unsigned long interface_num)
-{
-	return identify_enetfeature(ENET_KEY, interface_num);
-}
-EXPORT_SYMBOL(identify_enet);
-
-char identify_enetTxD(unsigned long interface_num)
-{
-	return identify_enetfeature(ENETTXD_KEY, interface_num);
-}
-EXPORT_SYMBOL(identify_enetTxD);
-
-unsigned long identify_family(void)
-{
-	unsigned long deviceid;
-
-	deviceid = get_deviceid();
-
-	return deviceid & CPU_DEVID_FAMILY;
-}
-EXPORT_SYMBOL(identify_family);
-
-unsigned long identify_revision(void)
-{
-	unsigned long deviceid;
-
-	deviceid = get_deviceid();
-
-	return deviceid & CPU_DEVID_REVISION;
-}
-EXPORT_SYMBOL(identify_revision);
-
-/* PROM environment functions */
-char *prom_getenv(char *env_name)
-{
-	/*
-	 * Return a pointer to the given environment variable.	prom_envp
-	 * points to a null terminated array of pointers to variables.
-	 * Environment variables are stored in the form of "memsize=64"
-	 */
-
-	char **var = prom_envp;
-	int i = strlen(env_name);
-
-	while (*var) {
-		if (strncmp(env_name, *var, i) == 0) {
-			return *var + strlen(env_name) + 1;
-		}
-		var++;
-	}
-
-	return NULL;
-}
-
-/* PROM commandline functions */
-void  __init prom_init_cmdline(void)
-{
-	char *cp;
-	int actr;
-
-	actr = 1; /* Always ignore argv[0] */
-
-	cp = &(arcs_cmdline[0]);
-	while (actr < prom_argc) {
-		strcpy(cp, prom_argv[actr]);
-		cp += strlen(prom_argv[actr]);
-		*cp++ = ' ';
-		actr++;
-	}
-	if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
-		--cp;
-	*cp = '\0';
-}
-
-/* memory allocation functions */
-static int __init prom_memtype_classify(unsigned int type)
-{
-	switch (type) {
-	case yamon_free:
-		return BOOT_MEM_RAM;
-	case yamon_prom:
-		return BOOT_MEM_ROM_DATA;
-	default:
-		return BOOT_MEM_RESERVED;
-	}
-}
-
-void __init prom_meminit(void)
-{
-	struct prom_pmemblock *p;
-
-	p = prom_getmdesc();
-
-	while (p->size) {
-		long type;
-		unsigned long base, size;
-
-		type = prom_memtype_classify(p->type);
-		base = p->base;
-		size = p->size;
-
-		add_memory_region(base, size, type);
-		p++;
-
-		if (type == BOOT_MEM_ROM_DATA) {
-			if (nr_prom_mem >= MAX_PROM_MEM) {
-				pr_err("Too many ROM DATA regions");
-				continue;
-			}
-			prom_mem_base[nr_prom_mem] = base;
-			prom_mem_size[nr_prom_mem] = size;
-			nr_prom_mem++;
-		}
-	}
-}
-
-void __init prom_free_prom_memory(void)
-{
-	int	argc;
-	char	**argv;
-	char	**envp;
-	char	*ptr;
-	int	len = 0;
-	int	i;
-
-	/*
-	 * preserve environment variables and command line from pmon/bbload
-	 * first preserve the command line
-	 */
-	for (argc = 0; argc < prom_argc; argc++) {
-		len += sizeof(char *);			/* length of pointer */
-		len += strlen(prom_argv[argc]) + 1;	/* length of string */
-	}
-	len += sizeof(char *);		/* plus length of null pointer */
-
-	argv = kmalloc(len, GFP_KERNEL);
-	ptr = (char *) &argv[prom_argc + 1];	/* strings follow array */
-
-	for (argc = 0; argc < prom_argc; argc++) {
-		argv[argc] = ptr;
-		strcpy(ptr, prom_argv[argc]);
-		ptr += strlen(prom_argv[argc]) + 1;
-	}
-	argv[prom_argc] = NULL;		/* end array with null pointer */
-	prom_argv = argv;
-
-	/* next preserve the environment variables */
-	len = 0;
-	i = 0;
-	for (envp = prom_envp; *envp != NULL; envp++) {
-		i++;		/* count number of environment variables */
-		len += sizeof(char *);		/* length of pointer */
-		len += strlen(*envp) + 1;	/* length of string */
-	}
-	len += sizeof(char *);		/* plus length of null pointer */
-
-	envp = kmalloc(len, GFP_KERNEL);
-	ptr = (char *) &envp[i+1];
-
-	for (argc = 0; argc < i; argc++) {
-		envp[argc] = ptr;
-		strcpy(ptr, prom_envp[argc]);
-		ptr += strlen(prom_envp[argc]) + 1;
-	}
-	envp[i] = NULL;			/* end array with null pointer */
-	prom_envp = envp;
-
-	for (i = 0; i < nr_prom_mem; i++) {
-		free_init_pages("prom memory",
-			prom_mem_base[i], prom_mem_base[i] + prom_mem_size[i]);
-	}
-}
-
-struct prom_pmemblock *__init prom_getmdesc(void)
-{
-	static char	memsz_env[] __initdata = "memsize";
-	static char	heaptop_env[] __initdata = "heaptop";
-	char		*str;
-	unsigned int	memsize;
-	unsigned int	heaptop;
-	int i;
-
-	str = prom_getenv(memsz_env);
-	if (!str) {
-		ppfinit("memsize not set in boot prom, "
-			"set to default (32Mb)\n");
-		memsize = 0x02000000;
-	} else {
-		memsize = simple_strtol(str, NULL, 0);
-
-		if (memsize == 0) {
-			/* if memsize is a bad size, use reasonable default */
-			memsize = 0x02000000;
-		}
-
-		/* convert to physical address (removing caching bits, etc) */
-		memsize = CPHYSADDR(memsize);
-	}
-
-	str = prom_getenv(heaptop_env);
-	if (!str) {
-		heaptop = CPHYSADDR((u32)&_text);
-		ppfinit("heaptop not set in boot prom, "
-			"set to default 0x%08x\n", heaptop);
-	} else {
-		heaptop = simple_strtol(str, NULL, 16);
-		if (heaptop == 0) {
-			/* heaptop conversion bad, might have 0xValue */
-			heaptop = simple_strtol(str, NULL, 0);
-
-			if (heaptop == 0) {
-				/* heaptop still bad, use reasonable default */
-				heaptop = CPHYSADDR((u32)&_text);
-			}
-		}
-
-		/* convert to physical address (removing caching bits, etc) */
-		heaptop = CPHYSADDR((u32)heaptop);
-	}
-
-	/* the base region */
-	i = 0;
-	mdesc[i].type = BOOT_MEM_RESERVED;
-	mdesc[i].base = 0x00000000;
-	mdesc[i].size = PAGE_ALIGN(0x300 + 0x80);
-		/* jtag interrupt vector + sizeof vector */
-
-	/* PMON data */
-	if (heaptop > mdesc[i].base + mdesc[i].size) {
-		i++;			/* 1 */
-		mdesc[i].type = BOOT_MEM_ROM_DATA;
-		mdesc[i].base = mdesc[i-1].base + mdesc[i-1].size;
-		mdesc[i].size = heaptop - mdesc[i].base;
-	}
-
-	/* end of PMON data to start of kernel -- probably zero .. */
-	if (heaptop != CPHYSADDR((u32)_text)) {
-		i++;	/* 2 */
-		mdesc[i].type = BOOT_MEM_RAM;
-		mdesc[i].base = heaptop;
-		mdesc[i].size = CPHYSADDR((u32)_text) - mdesc[i].base;
-	}
-
-	/*  kernel proper */
-	i++;			/* 3 */
-	mdesc[i].type = BOOT_MEM_RESERVED;
-	mdesc[i].base = CPHYSADDR((u32)_text);
-	mdesc[i].size = CPHYSADDR(PAGE_ALIGN((u32)_end)) - mdesc[i].base;
-
-	/* Remainder of RAM -- under memsize */
-	i++;			/* 5 */
-	mdesc[i].type = yamon_free;
-	mdesc[i].base = mdesc[i-1].base + mdesc[i-1].size;
-	mdesc[i].size = memsize - mdesc[i].base;
-
-	return &mdesc[0];
-}
diff --git a/arch/mips/pmcs-msp71xx/msp_serial.c b/arch/mips/pmcs-msp71xx/msp_serial.c
deleted file mode 100644
index 940c684f6921..000000000000
--- a/arch/mips/pmcs-msp71xx/msp_serial.c
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * The setup file for serial related hardware on PMC-Sierra MSP processors.
- *
- * Copyright 2005 PMC-Sierra, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_reg.h>
-#include <linux/slab.h>
-
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/serial.h>
-#include <linux/serial_8250.h>
-
-#include <msp_prom.h>
-#include <msp_int.h>
-#include <msp_regs.h>
-
-struct msp_uart_data {
-	int	last_lcr;
-};
-
-static void msp_serial_out(struct uart_port *p, int offset, int value)
-{
-	struct msp_uart_data *d = p->private_data;
-
-	if (offset == UART_LCR)
-		d->last_lcr = value;
-
-	offset <<= p->regshift;
-	writeb(value, p->membase + offset);
-}
-
-static unsigned int msp_serial_in(struct uart_port *p, int offset)
-{
-	offset <<= p->regshift;
-
-	return readb(p->membase + offset);
-}
-
-static int msp_serial_handle_irq(struct uart_port *p)
-{
-	struct msp_uart_data *d = p->private_data;
-	unsigned int iir = readb(p->membase + (UART_IIR << p->regshift));
-
-	if (serial8250_handle_irq(p, iir)) {
-		return 1;
-	} else if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY) {
-		/*
-		 * The DesignWare APB UART has an Busy Detect (0x07) interrupt
-		 * meaning an LCR write attempt occurred while the UART was
-		 * busy. The interrupt must be cleared by reading the UART
-		 * status register (USR) and the LCR re-written.
-		 *
-		 * Note: MSP reserves 0x20 bytes of address space for the UART
-		 * and the USR is mapped in a separate block at an offset of
-		 * 0xc0 from the start of the UART.
-		 */
-		(void)readb(p->membase + 0xc0);
-		writeb(d->last_lcr, p->membase + (UART_LCR << p->regshift));
-
-		return 1;
-	}
-
-	return 0;
-}
-
-void __init msp_serial_setup(void)
-{
-	char	*s;
-	char	*endp;
-	struct uart_port up;
-	unsigned int uartclk;
-
-	memset(&up, 0, sizeof(up));
-
-	/* Check if clock was specified in environment */
-	s = prom_getenv("uartfreqhz");
-	if(!(s && *s && (uartclk = simple_strtoul(s, &endp, 10)) && *endp == 0))
-		uartclk = MSP_BASE_BAUD;
-	ppfinit("UART clock set to %d\n", uartclk);
-
-	/* Initialize first serial port */
-	up.mapbase	= MSP_UART0_BASE;
-	up.membase	= ioremap(up.mapbase, MSP_UART_REG_LEN);
-	up.irq		= MSP_INT_UART0;
-	up.uartclk	= uartclk;
-	up.regshift	= 2;
-	up.iotype	= UPIO_MEM;
-	up.flags	= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
-	up.type		= PORT_16550A;
-	up.line		= 0;
-	up.serial_out	= msp_serial_out;
-	up.serial_in	= msp_serial_in;
-	up.handle_irq	= msp_serial_handle_irq;
-	up.private_data = kzalloc(sizeof(struct msp_uart_data), GFP_KERNEL);
-	if (!up.private_data) {
-		pr_err("failed to allocate uart private data\n");
-		return;
-	}
-	if (early_serial_setup(&up)) {
-		kfree(up.private_data);
-		pr_err("Early serial init of port 0 failed\n");
-	}
-
-	/* Initialize the second serial port, if one exists */
-	switch (mips_machtype) {
-		case MACH_MSP4200_EVAL:
-		case MACH_MSP4200_GW:
-		case MACH_MSP4200_FPGA:
-		case MACH_MSP7120_EVAL:
-		case MACH_MSP7120_GW:
-		case MACH_MSP7120_FPGA:
-			/* Enable UART1 on MSP4200 and MSP7120 */
-			*GPIO_CFG2_REG = 0x00002299;
-			break;
-
-		default:
-			return; /* No second serial port, good-bye. */
-	}
-
-	up.mapbase	= MSP_UART1_BASE;
-	up.membase	= ioremap(up.mapbase, MSP_UART_REG_LEN);
-	up.irq		= MSP_INT_UART1;
-	up.line		= 1;
-	up.private_data		= (void*)UART1_STATUS_REG;
-	if (early_serial_setup(&up)) {
-		kfree(up.private_data);
-		pr_err("Early serial init of port 1 failed\n");
-	}
-}
diff --git a/arch/mips/pmcs-msp71xx/msp_setup.c b/arch/mips/pmcs-msp71xx/msp_setup.c
deleted file mode 100644
index e0f20f487d96..000000000000
--- a/arch/mips/pmcs-msp71xx/msp_setup.c
+++ /dev/null
@@ -1,228 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * The generic setup file for PMC-Sierra MSP processors
- *
- * Copyright 2005-2007 PMC-Sierra, Inc,
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- */
-
-#include <linux/delay.h>
-
-#include <asm/bootinfo.h>
-#include <asm/cacheflush.h>
-#include <asm/idle.h>
-#include <asm/r4kcache.h>
-#include <asm/reboot.h>
-#include <asm/smp-ops.h>
-#include <asm/time.h>
-
-#include <msp_prom.h>
-#include <msp_regs.h>
-
-#if defined(CONFIG_PMC_MSP7120_GW)
-#include <msp_regops.h>
-#define MSP_BOARD_RESET_GPIO	9
-#endif
-
-extern void msp_serial_setup(void);
-
-#if defined(CONFIG_PMC_MSP7120_EVAL) || \
-    defined(CONFIG_PMC_MSP7120_GW) || \
-    defined(CONFIG_PMC_MSP7120_FPGA)
-/*
- * Performs the reset for MSP7120-based boards
- */
-void msp7120_reset(void)
-{
-	void *start, *end, *iptr;
-
-	/* Diasble all interrupts */
-	local_irq_disable();
-#ifdef CONFIG_SYS_SUPPORTS_MULTITHREADING
-	dvpe();
-#endif
-
-	/* Cache the reset code of this function */
-	__asm__ __volatile__ (
-		"	.set	push				\n"
-		"	.set	arch=r4000			\n"
-		"	la	%0,startpoint			\n"
-		"	la	%1,endpoint			\n"
-		"	.set	pop				\n"
-		: "=r" (start), "=r" (end)
-		:
-	);
-
-	for (iptr = (void *)((unsigned int)start & ~(L1_CACHE_BYTES - 1));
-	     iptr < end; iptr += L1_CACHE_BYTES)
-		cache_op(Fill_I, iptr);
-
-	__asm__ __volatile__ (
-		"startpoint:					\n"
-	);
-
-	/* Put the DDRC into self-refresh mode */
-	DDRC_INDIRECT_WRITE(DDRC_CTL(10), 0xb, 1 << 16);
-
-	/*
-	 * IMPORTANT!
-	 * DO NOT do anything from here on out that might even
-	 * think about fetching from RAM - i.e., don't call any
-	 * non-inlined functions, and be VERY sure that any inline
-	 * functions you do call do NOT access any sort of RAM
-	 * anywhere!
-	 */
-
-	/* Wait a bit for the DDRC to settle */
-	mdelay(125);
-
-#if defined(CONFIG_PMC_MSP7120_GW)
-	/*
-	 * Set GPIO 9 HI, (tied to board reset logic)
-	 * GPIO 9 is the 4th GPIO of register 3
-	 *
-	 * NOTE: We cannot use the higher-level msp_gpio_mode()/out()
-	 * as GPIO char driver may not be enabled and it would look up
-	 * data inRAM!
-	 */
-	set_value_reg32(GPIO_CFG3_REG, 0xf000, 0x8000);
-	set_reg32(GPIO_DATA3_REG, 8);
-
-	/*
-	 * In case GPIO9 doesn't reset the board (jumper configurable!)
-	 * fallback to device reset below.
-	 */
-#endif
-	/* Set bit 1 of the MSP7120 reset register */
-	*RST_SET_REG = 0x00000001;
-
-	__asm__ __volatile__ (
-		"endpoint:					\n"
-	);
-}
-#endif
-
-void msp_restart(char *command)
-{
-	printk(KERN_WARNING "Now rebooting .......\n");
-
-#if defined(CONFIG_PMC_MSP7120_EVAL) || \
-    defined(CONFIG_PMC_MSP7120_GW) || \
-    defined(CONFIG_PMC_MSP7120_FPGA)
-	msp7120_reset();
-#else
-	/* No chip-specific reset code, just jump to the ROM reset vector */
-	set_c0_status(ST0_BEV | ST0_ERL);
-	change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
-	__flush_cache_all();
-	write_c0_wired(0);
-
-	__asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
-#endif
-}
-
-void msp_halt(void)
-{
-	printk(KERN_WARNING "\n** You can safely turn off the power\n");
-	while (1)
-		/* If possible call official function to get CPU WARs */
-		if (cpu_wait)
-			(*cpu_wait)();
-		else
-			__asm__(".set\tmips3\n\t" "wait\n\t" ".set\tmips0");
-}
-
-void msp_power_off(void)
-{
-	msp_halt();
-}
-
-void __init plat_mem_setup(void)
-{
-	_machine_restart = msp_restart;
-	_machine_halt = msp_halt;
-	pm_power_off = msp_power_off;
-}
-
-void __init prom_init(void)
-{
-	unsigned long family;
-	unsigned long revision;
-
-	prom_argc = fw_arg0;
-	prom_argv = (char **)fw_arg1;
-	prom_envp = (char **)fw_arg2;
-
-	/*
-	 * Someday we can use this with PMON2000 to get a
-	 * platform call prom routines for output etc. without
-	 * having to use grody hacks.  For now it's unused.
-	 *
-	 * struct callvectors *cv = (struct callvectors *) fw_arg3;
-	 */
-	family = identify_family();
-	revision = identify_revision();
-
-	switch (family) {
-	case FAMILY_FPGA:
-		if (FPGA_IS_MSP4200(revision)) {
-			/* Old-style revision ID */
-			mips_machtype = MACH_MSP4200_FPGA;
-		} else {
-			mips_machtype = MACH_MSP_OTHER;
-		}
-		break;
-
-	case FAMILY_MSP4200:
-#if defined(CONFIG_PMC_MSP4200_EVAL)
-		mips_machtype  = MACH_MSP4200_EVAL;
-#elif defined(CONFIG_PMC_MSP4200_GW)
-		mips_machtype  = MACH_MSP4200_GW;
-#else
-		mips_machtype = MACH_MSP_OTHER;
-#endif
-		break;
-
-	case FAMILY_MSP4200_FPGA:
-		mips_machtype  = MACH_MSP4200_FPGA;
-		break;
-
-	case FAMILY_MSP7100:
-#if defined(CONFIG_PMC_MSP7120_EVAL)
-		mips_machtype = MACH_MSP7120_EVAL;
-#elif defined(CONFIG_PMC_MSP7120_GW)
-		mips_machtype = MACH_MSP7120_GW;
-#else
-		mips_machtype = MACH_MSP_OTHER;
-#endif
-		break;
-
-	case FAMILY_MSP7100_FPGA:
-		mips_machtype  = MACH_MSP7120_FPGA;
-		break;
-
-	default:
-		/* we don't recognize the machine */
-		mips_machtype  = MACH_UNKNOWN;
-		panic("***Bogosity factor five***, exiting");
-		break;
-	}
-
-	prom_init_cmdline();
-
-	prom_meminit();
-
-	/*
-	 * Sub-system setup follows.
-	 * Setup functions can	either be called here or using the
-	 * subsys_initcall mechanism (i.e. see msp_pci_setup). The
-	 * order in which they are called can be changed by using the
-	 * link order in arch/mips/pmc-sierra/msp71xx/Makefile.
-	 *
-	 * NOTE: Please keep sub-system specific initialization code
-	 * in separate specific files.
-	 */
-	msp_serial_setup();
-
-	register_vsmp_smp_ops();
-}
diff --git a/arch/mips/pmcs-msp71xx/msp_smp.c b/arch/mips/pmcs-msp71xx/msp_smp.c
deleted file mode 100644
index 00092e2924ec..000000000000
--- a/arch/mips/pmcs-msp71xx/msp_smp.c
+++ /dev/null
@@ -1,56 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2000, 2001, 2004 MIPS Technologies, Inc.
- * Copyright (C) 2001 Ralf Baechle
- * Copyright (C) 2010 PMC-Sierra, Inc.
- *
- *  VSMP support for MSP platforms . Derived from malta vsmp support.
- */
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-
-#include <asm/setup.h>
-
-#ifdef CONFIG_MIPS_MT_SMP
-#define MIPS_CPU_IPI_RESCHED_IRQ 0	/* SW int 0 for resched */
-#define MIPS_CPU_IPI_CALL_IRQ 1		/* SW int 1 for call */
-
-
-static void ipi_resched_dispatch(void)
-{
-	do_IRQ(MIPS_CPU_IPI_RESCHED_IRQ);
-}
-
-static void ipi_call_dispatch(void)
-{
-	do_IRQ(MIPS_CPU_IPI_CALL_IRQ);
-}
-
-static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id)
-{
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t ipi_call_interrupt(int irq, void *dev_id)
-{
-	generic_smp_call_function_interrupt();
-
-	return IRQ_HANDLED;
-}
-
-void __init arch_init_ipiirq(int irq, const char *name, irq_handler_t handler)
-{
-	if (request_irq(irq, handler, IRQF_PERCPU, name, NULL))
-		pr_err("Failed to request irq %d (%s)\n", irq, name);
-	irq_set_handler(irq, handle_percpu_irq);
-}
-
-void __init msp_vsmp_int_init(void)
-{
-	set_vi_handler(MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch);
-	set_vi_handler(MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch);
-	arch_init_ipiirq(MIPS_CPU_IPI_RESCHED_IRQ, "IPI_resched",
-			 ipi_resched_interrupt);
-	arch_init_ipiirq(MIPS_CPU_IPI_CALL_IRQ, "IPI_call", ipi_call_interrupt);
-}
-#endif /* CONFIG_MIPS_MT_SMP */
diff --git a/arch/mips/pmcs-msp71xx/msp_time.c b/arch/mips/pmcs-msp71xx/msp_time.c
deleted file mode 100644
index 9c629829f447..000000000000
--- a/arch/mips/pmcs-msp71xx/msp_time.c
+++ /dev/null
@@ -1,90 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Setting up the clock on MSP SOCs.  No RTC typically.
- *
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
- *
- * ########################################################################
- *
- * ########################################################################
- */
-
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/ptrace.h>
-
-#include <asm/cevt-r4k.h>
-#include <asm/mipsregs.h>
-#include <asm/time.h>
-
-#include <msp_prom.h>
-#include <msp_int.h>
-#include <msp_regs.h>
-
-#define get_current_vpe()   \
-	((read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE)
-
-static int tim_installed;
-
-void __init plat_time_init(void)
-{
-	char	*endp, *s;
-	unsigned long cpu_rate = 0;
-
-	if (cpu_rate == 0) {
-		s = prom_getenv("clkfreqhz");
-		cpu_rate = simple_strtoul(s, &endp, 10);
-		if (endp != NULL && *endp != 0) {
-			printk(KERN_ERR
-				"Clock rate in Hz parse error: %s\n", s);
-			cpu_rate = 0;
-		}
-	}
-
-	if (cpu_rate == 0) {
-		s = prom_getenv("clkfreq");
-		cpu_rate = 1000 * simple_strtoul(s, &endp, 10);
-		if (endp != NULL && *endp != 0) {
-			printk(KERN_ERR
-				"Clock rate in MHz parse error: %s\n", s);
-			cpu_rate = 0;
-		}
-	}
-
-	if (cpu_rate == 0) {
-#if defined(CONFIG_PMC_MSP7120_EVAL) \
- || defined(CONFIG_PMC_MSP7120_GW)
-		cpu_rate = 400000000;
-#elif defined(CONFIG_PMC_MSP7120_FPGA)
-		cpu_rate = 25000000;
-#else
-		cpu_rate = 150000000;
-#endif
-		printk(KERN_ERR
-			"Failed to determine CPU clock rate, "
-			"assuming %ld hz ...\n", cpu_rate);
-	}
-
-	printk(KERN_WARNING "Clock rate set to %ld\n", cpu_rate);
-
-	/* timer frequency is 1/2 clock rate */
-	mips_hpt_frequency = cpu_rate/2;
-}
-
-unsigned int get_c0_compare_int(void)
-{
-	unsigned long flags = IRQF_PERCPU | IRQF_TIMER | IRQF_SHARED;
-
-	/* MIPS_MT modes may want timer for second VPE */
-	if ((get_current_vpe()) && !tim_installed) {
-		if (request_irq(MSP_INT_VPE1_TIMER, c0_compare_interrupt, flags,
-				"timer", c0_compare_interrupt))
-			pr_err("Failed to register timer interrupt\n");
-		tim_installed++;
-	}
-
-	return get_current_vpe() ? MSP_INT_VPE1_TIMER : MSP_INT_VPE0_TIMER;
-}
diff --git a/arch/mips/pmcs-msp71xx/msp_usb.c b/arch/mips/pmcs-msp71xx/msp_usb.c
deleted file mode 100644
index d38ac70b5a2e..000000000000
--- a/arch/mips/pmcs-msp71xx/msp_usb.c
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * The setup file for USB related hardware on PMC-Sierra MSP processors.
- *
- * Copyright 2006 PMC-Sierra, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_GADGET)
-
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-
-#include <asm/mipsregs.h>
-
-#include <msp_regs.h>
-#include <msp_int.h>
-#include <msp_prom.h>
-#include <msp_usb.h>
-
-
-#if defined(CONFIG_USB_EHCI_HCD)
-static struct resource msp_usbhost0_resources[] = {
-	[0] = { /* EHCI-HS operational and capabilities registers */
-		.start	= MSP_USB0_HS_START,
-		.end	= MSP_USB0_HS_END,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= MSP_INT_USB,
-		.end	= MSP_INT_USB,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = { /* MSBus-to-AMBA bridge register space */
-		.start	= MSP_USB0_MAB_START,
-		.end	= MSP_USB0_MAB_END,
-		.flags	= IORESOURCE_MEM,
-	},
-	[3] = { /* Identification and general hardware parameters */
-		.start	= MSP_USB0_ID_START,
-		.end	= MSP_USB0_ID_END,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static u64 msp_usbhost0_dma_mask = 0xffffffffUL;
-
-static struct mspusb_device msp_usbhost0_device = {
-	.dev	= {
-		.name	= "pmcmsp-ehci",
-		.id	= 0,
-		.dev	= {
-			.dma_mask = &msp_usbhost0_dma_mask,
-			.coherent_dma_mask = 0xffffffffUL,
-		},
-		.num_resources	= ARRAY_SIZE(msp_usbhost0_resources),
-		.resource	= msp_usbhost0_resources,
-	},
-};
-#endif /* CONFIG_USB_EHCI_HCD */
-
-#if defined(CONFIG_USB_GADGET)
-static struct resource msp_usbdev0_resources[] = {
-	[0] = { /* EHCI-HS operational and capabilities registers */
-		.start	= MSP_USB0_HS_START,
-		.end	= MSP_USB0_HS_END,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= MSP_INT_USB,
-		.end	= MSP_INT_USB,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = { /* MSBus-to-AMBA bridge register space */
-		.start	= MSP_USB0_MAB_START,
-		.end	= MSP_USB0_MAB_END,
-		.flags	= IORESOURCE_MEM,
-	},
-	[3] = { /* Identification and general hardware parameters */
-		.start	= MSP_USB0_ID_START,
-		.end	= MSP_USB0_ID_END,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static u64 msp_usbdev_dma_mask = 0xffffffffUL;
-
-/* This may need to be converted to a mspusb_device, too. */
-static struct mspusb_device msp_usbdev0_device = {
-	.dev	= {
-		.name	= "msp71xx_udc",
-		.id	= 0,
-		.dev	= {
-			.dma_mask = &msp_usbdev_dma_mask,
-			.coherent_dma_mask = 0xffffffffUL,
-		},
-		.num_resources	= ARRAY_SIZE(msp_usbdev0_resources),
-		.resource	= msp_usbdev0_resources,
-	},
-};
-#endif /* CONFIG_USB_GADGET */
-
-static int __init msp_usb_setup(void)
-{
-	char		*strp;
-	char		envstr[32];
-	struct platform_device *msp_devs[NUM_USB_DEVS];
-	unsigned int val;
-
-	/* construct environment name usbmode */
-	/* set usbmode <host/device> as pmon environment var */
-	/*
-	 * Could this perhaps be integrated into the "features" env var?
-	 * Use the features key "U", and follow with "H" for host-mode,
-	 * "D" for device-mode.	 If it works for Ethernet, why not USB...
-	 *  -- hammtrev, 2007/03/22
-	 */
-	snprintf(&envstr[0], sizeof(envstr), "usbmode");
-
-	/* set default host mode */
-	val = 1;
-
-	/* get environment string */
-	strp = prom_getenv(&envstr[0]);
-	if (strp) {
-		/* compare string */
-		if (!strcmp(strp, "device"))
-			val = 0;
-	}
-
-	if (val) {
-#if defined(CONFIG_USB_EHCI_HCD)
-		msp_devs[0] = &msp_usbhost0_device.dev;
-		ppfinit("platform add USB HOST done %s.\n", msp_devs[0]->name);
-#else
-		ppfinit("%s: echi_hcd not supported\n", __FILE__);
-#endif	/* CONFIG_USB_EHCI_HCD */
-	} else {
-#if defined(CONFIG_USB_GADGET)
-		/* get device mode structure */
-		msp_devs[0] = &msp_usbdev0_device.dev;
-		ppfinit("platform add USB DEVICE done %s.\n"
-					, msp_devs[0]->name);
-#else
-		ppfinit("%s: usb_gadget not supported\n", __FILE__);
-#endif	/* CONFIG_USB_GADGET */
-	}
-	/* add device */
-	platform_add_devices(msp_devs, ARRAY_SIZE(msp_devs));
-
-	return 0;
-}
-
-subsys_initcall(msp_usb_setup);
-#endif /* CONFIG_USB_EHCI_HCD || CONFIG_USB_GADGET */