MIPS: MSP71xx: Move code.

Now that Yosemite's gone we can move the MSP71xx code one level up.

Shane McDonald <mcdonald.shane@gmail.com>'s
https://patchwork.linux-mips.org/patch/4736/ has been folded into this
patch.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 0 insertions, 245 deletions

diff --git a/arch/mips/pmc-sierra/msp71xx/msp_setup.c b/arch/mips/pmc-sierra/msp71xx/msp_setup.c
deleted file mode 100644
index 1651cfdbfe7b..000000000000
--- a/arch/mips/pmc-sierra/msp71xx/msp_setup.c
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
- * The generic setup file for PMC-Sierra MSP processors
- *
- * Copyright 2005-2007 PMC-Sierra, Inc,
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute	it and/or modify it
- * under  the terms of	the GNU General	 Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <asm/bootinfo.h>
-#include <asm/cacheflush.h>
-#include <asm/r4kcache.h>
-#include <asm/reboot.h>
-#include <asm/smp-ops.h>
-#include <asm/time.h>
-
-#include <msp_prom.h>
-#include <msp_regs.h>
-
-#if defined(CONFIG_PMC_MSP7120_GW)
-#include <msp_regops.h>
-#define MSP_BOARD_RESET_GPIO	9
-#endif
-
-extern void msp_serial_setup(void);
-extern void pmctwiled_setup(void);
-
-#if defined(CONFIG_PMC_MSP7120_EVAL) || \
-    defined(CONFIG_PMC_MSP7120_GW) || \
-    defined(CONFIG_PMC_MSP7120_FPGA)
-/*
- * Performs the reset for MSP7120-based boards
- */
-void msp7120_reset(void)
-{
-	void *start, *end, *iptr;
-	register int i;
-
-	/* Diasble all interrupts */
-	local_irq_disable();
-#ifdef CONFIG_SYS_SUPPORTS_MULTITHREADING
-	dvpe();
-#endif
-
-	/* Cache the reset code of this function */
-	__asm__ __volatile__ (
-		"	.set	push				\n"
-		"	.set	mips3				\n"
-		"	la	%0,startpoint			\n"
-		"	la	%1,endpoint			\n"
-		"	.set	pop				\n"
-		: "=r" (start), "=r" (end)
-		:
-	);
-
-	for (iptr = (void *)((unsigned int)start & ~(L1_CACHE_BYTES - 1));
-	     iptr < end; iptr += L1_CACHE_BYTES)
-		cache_op(Fill, iptr);
-
-	__asm__ __volatile__ (
-		"startpoint:					\n"
-	);
-
-	/* Put the DDRC into self-refresh mode */
-	DDRC_INDIRECT_WRITE(DDRC_CTL(10), 0xb, 1 << 16);
-
-	/*
-	 * IMPORTANT!
-	 * DO NOT do anything from here on out that might even
-	 * think about fetching from RAM - i.e., don't call any
-	 * non-inlined functions, and be VERY sure that any inline
-	 * functions you do call do NOT access any sort of RAM
-	 * anywhere!
-	 */
-
-	/* Wait a bit for the DDRC to settle */
-	for (i = 0; i < 100000000; i++);
-
-#if defined(CONFIG_PMC_MSP7120_GW)
-	/*
-	 * Set GPIO 9 HI, (tied to board reset logic)
-	 * GPIO 9 is the 4th GPIO of register 3
-	 *
-	 * NOTE: We cannot use the higher-level msp_gpio_mode()/out()
-	 * as GPIO char driver may not be enabled and it would look up
-	 * data inRAM!
-	 */
-	set_value_reg32(GPIO_CFG3_REG, 0xf000, 0x8000);
-	set_reg32(GPIO_DATA3_REG, 8);
-
-	/*
-	 * In case GPIO9 doesn't reset the board (jumper configurable!)
-	 * fallback to device reset below.
-	 */
-#endif
-	/* Set bit 1 of the MSP7120 reset register */
-	*RST_SET_REG = 0x00000001;
-
-	__asm__ __volatile__ (
-		"endpoint:					\n"
-	);
-}
-#endif
-
-void msp_restart(char *command)
-{
-	printk(KERN_WARNING "Now rebooting .......\n");
-
-#if defined(CONFIG_PMC_MSP7120_EVAL) || \
-    defined(CONFIG_PMC_MSP7120_GW) || \
-    defined(CONFIG_PMC_MSP7120_FPGA)
-	msp7120_reset();
-#else
-	/* No chip-specific reset code, just jump to the ROM reset vector */
-	set_c0_status(ST0_BEV | ST0_ERL);
-	change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
-	flush_cache_all();
-	write_c0_wired(0);
-
-	__asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
-#endif
-}
-
-void msp_halt(void)
-{
-	printk(KERN_WARNING "\n** You can safely turn off the power\n");
-	while (1)
-		/* If possible call official function to get CPU WARs */
-		if (cpu_wait)
-			(*cpu_wait)();
-		else
-			__asm__(".set\tmips3\n\t" "wait\n\t" ".set\tmips0");
-}
-
-void msp_power_off(void)
-{
-	msp_halt();
-}
-
-void __init plat_mem_setup(void)
-{
-	_machine_restart = msp_restart;
-	_machine_halt = msp_halt;
-	pm_power_off = msp_power_off;
-}
-
-extern struct plat_smp_ops msp_smtc_smp_ops;
-
-void __init prom_init(void)
-{
-	unsigned long family;
-	unsigned long revision;
-
-	prom_argc = fw_arg0;
-	prom_argv = (char **)fw_arg1;
-	prom_envp = (char **)fw_arg2;
-
-	/*
-	 * Someday we can use this with PMON2000 to get a
-	 * platform call prom routines for output etc. without
-	 * having to use grody hacks.  For now it's unused.
-	 *
-	 * struct callvectors *cv = (struct callvectors *) fw_arg3;
-	 */
-	family = identify_family();
-	revision = identify_revision();
-
-	switch (family) {
-	case FAMILY_FPGA:
-		if (FPGA_IS_MSP4200(revision)) {
-			/* Old-style revision ID */
-			mips_machtype = MACH_MSP4200_FPGA;
-		} else {
-			mips_machtype = MACH_MSP_OTHER;
-		}
-		break;
-
-	case FAMILY_MSP4200:
-#if defined(CONFIG_PMC_MSP4200_EVAL)
-		mips_machtype  = MACH_MSP4200_EVAL;
-#elif defined(CONFIG_PMC_MSP4200_GW)
-		mips_machtype  = MACH_MSP4200_GW;
-#else
-		mips_machtype = MACH_MSP_OTHER;
-#endif
-		break;
-
-	case FAMILY_MSP4200_FPGA:
-		mips_machtype  = MACH_MSP4200_FPGA;
-		break;
-
-	case FAMILY_MSP7100:
-#if defined(CONFIG_PMC_MSP7120_EVAL)
-		mips_machtype = MACH_MSP7120_EVAL;
-#elif defined(CONFIG_PMC_MSP7120_GW)
-		mips_machtype = MACH_MSP7120_GW;
-#else
-		mips_machtype = MACH_MSP_OTHER;
-#endif
-		break;
-
-	case FAMILY_MSP7100_FPGA:
-		mips_machtype  = MACH_MSP7120_FPGA;
-		break;
-
-	default:
-		/* we don't recognize the machine */
-		mips_machtype  = MACH_UNKNOWN;
-		panic("***Bogosity factor five***, exiting");
-		break;
-	}
-
-	prom_init_cmdline();
-
-	prom_meminit();
-
-	/*
-	 * Sub-system setup follows.
-	 * Setup functions can	either be called here or using the
-	 * subsys_initcall mechanism (i.e. see msp_pci_setup). The
-	 * order in which they are called can be changed by using the
-	 * link order in arch/mips/pmc-sierra/msp71xx/Makefile.
-	 *
-	 * NOTE: Please keep sub-system specific initialization code
-	 * in separate specific files.
-	 */
-	msp_serial_setup();
-
-	if (register_vsmp_smp_ops()) {
-#ifdef CONFIG_MIPS_MT_SMTC
-		register_smp_ops(&msp_smtc_smp_ops);
-#endif
-	}
-
-#ifdef CONFIG_PMCTWILED
-	/*
-	 * Setup LED states before the subsys_initcall loads other
-	 * dependent drivers/modules.
-	 */
-	pmctwiled_setup();
-#endif
-}