MIPS: Move headfiles to new location below arch/mips/include

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 574 insertions, 0 deletions

diff --git a/arch/mips/include/asm/stackframe.h b/arch/mips/include/asm/stackframe.h
new file mode 100644
index 000000000000..4c37c4e5f72e
--- /dev/null
+++ b/arch/mips/include/asm/stackframe.h
@@ -0,0 +1,574 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 95, 96, 99, 2001 Ralf Baechle
+ * Copyright (C) 1994, 1995, 1996 Paul M. Antoine.
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Copyright (C) 2007  Maciej W. Rozycki
+ */
+#ifndef _ASM_STACKFRAME_H
+#define _ASM_STACKFRAME_H
+
+#include <linux/threads.h>
+
+#include <asm/asm.h>
+#include <asm/asmmacro.h>
+#include <asm/mipsregs.h>
+#include <asm/asm-offsets.h>
+
+/*
+ * For SMTC kernel, global IE should be left set, and interrupts
+ * controlled exclusively via IXMT.
+ */
+#ifdef CONFIG_MIPS_MT_SMTC
+#define STATMASK 0x1e
+#elif defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+#define STATMASK 0x3f
+#else
+#define STATMASK 0x1f
+#endif
+
+#ifdef CONFIG_MIPS_MT_SMTC
+#include <asm/mipsmtregs.h>
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+		.macro	SAVE_AT
+		.set	push
+		.set	noat
+		LONG_S	$1, PT_R1(sp)
+		.set	pop
+		.endm
+
+		.macro	SAVE_TEMP
+#ifdef CONFIG_CPU_HAS_SMARTMIPS
+		mflhxu	v1
+		LONG_S	v1, PT_LO(sp)
+		mflhxu	v1
+		LONG_S	v1, PT_HI(sp)
+		mflhxu	v1
+		LONG_S	v1, PT_ACX(sp)
+#else
+		mfhi	v1
+		LONG_S	v1, PT_HI(sp)
+		mflo	v1
+		LONG_S	v1, PT_LO(sp)
+#endif
+#ifdef CONFIG_32BIT
+		LONG_S	$8, PT_R8(sp)
+		LONG_S	$9, PT_R9(sp)
+#endif
+		LONG_S	$10, PT_R10(sp)
+		LONG_S	$11, PT_R11(sp)
+		LONG_S	$12, PT_R12(sp)
+		LONG_S	$13, PT_R13(sp)
+		LONG_S	$14, PT_R14(sp)
+		LONG_S	$15, PT_R15(sp)
+		LONG_S	$24, PT_R24(sp)
+		.endm
+
+		.macro	SAVE_STATIC
+		LONG_S	$16, PT_R16(sp)
+		LONG_S	$17, PT_R17(sp)
+		LONG_S	$18, PT_R18(sp)
+		LONG_S	$19, PT_R19(sp)
+		LONG_S	$20, PT_R20(sp)
+		LONG_S	$21, PT_R21(sp)
+		LONG_S	$22, PT_R22(sp)
+		LONG_S	$23, PT_R23(sp)
+		LONG_S	$30, PT_R30(sp)
+		.endm
+
+#ifdef CONFIG_SMP
+#ifdef CONFIG_MIPS_MT_SMTC
+#define PTEBASE_SHIFT	19	/* TCBIND */
+#else
+#define PTEBASE_SHIFT	23	/* CONTEXT */
+#endif
+		.macro	get_saved_sp	/* SMP variation */
+#ifdef CONFIG_MIPS_MT_SMTC
+		mfc0	k0, CP0_TCBIND
+#else
+		MFC0	k0, CP0_CONTEXT
+#endif
+#if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32)
+		lui	k1, %hi(kernelsp)
+#else
+		lui	k1, %highest(kernelsp)
+		daddiu	k1, %higher(kernelsp)
+		dsll	k1, 16
+		daddiu	k1, %hi(kernelsp)
+		dsll	k1, 16
+#endif
+		LONG_SRL	k0, PTEBASE_SHIFT
+		LONG_ADDU	k1, k0
+		LONG_L	k1, %lo(kernelsp)(k1)
+		.endm
+
+		.macro	set_saved_sp stackp temp temp2
+#ifdef CONFIG_MIPS_MT_SMTC
+		mfc0	\temp, CP0_TCBIND
+#else
+		MFC0	\temp, CP0_CONTEXT
+#endif
+		LONG_SRL	\temp, PTEBASE_SHIFT
+		LONG_S	\stackp, kernelsp(\temp)
+		.endm
+#else
+		.macro	get_saved_sp	/* Uniprocessor variation */
+#if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32)
+		lui	k1, %hi(kernelsp)
+#else
+		lui	k1, %highest(kernelsp)
+		daddiu	k1, %higher(kernelsp)
+		dsll	k1, k1, 16
+		daddiu	k1, %hi(kernelsp)
+		dsll	k1, k1, 16
+#endif
+		LONG_L	k1, %lo(kernelsp)(k1)
+		.endm
+
+		.macro	set_saved_sp stackp temp temp2
+		LONG_S	\stackp, kernelsp
+		.endm
+#endif
+
+		.macro	SAVE_SOME
+		.set	push
+		.set	noat
+		.set	reorder
+		mfc0	k0, CP0_STATUS
+		sll	k0, 3		/* extract cu0 bit */
+		.set	noreorder
+		bltz	k0, 8f
+		 move	k1, sp
+		.set	reorder
+		/* Called from user mode, new stack. */
+		get_saved_sp
+#ifndef CONFIG_CPU_DADDI_WORKAROUNDS
+8:		move	k0, sp
+		PTR_SUBU sp, k1, PT_SIZE
+#else
+		.set	at=k0
+8:		PTR_SUBU k1, PT_SIZE
+		.set	noat
+		move	k0, sp
+		move	sp, k1
+#endif
+		LONG_S	k0, PT_R29(sp)
+		LONG_S	$3, PT_R3(sp)
+		/*
+		 * You might think that you don't need to save $0,
+		 * but the FPU emulator and gdb remote debug stub
+		 * need it to operate correctly
+		 */
+		LONG_S	$0, PT_R0(sp)
+		mfc0	v1, CP0_STATUS
+		LONG_S	$2, PT_R2(sp)
+		LONG_S	v1, PT_STATUS(sp)
+#ifdef CONFIG_MIPS_MT_SMTC
+		/*
+		 * Ideally, these instructions would be shuffled in
+		 * to cover the pipeline delay.
+		 */
+		.set	mips32
+		mfc0	v1, CP0_TCSTATUS
+		.set	mips0
+		LONG_S	v1, PT_TCSTATUS(sp)
+#endif /* CONFIG_MIPS_MT_SMTC */
+		LONG_S	$4, PT_R4(sp)
+		mfc0	v1, CP0_CAUSE
+		LONG_S	$5, PT_R5(sp)
+		LONG_S	v1, PT_CAUSE(sp)
+		LONG_S	$6, PT_R6(sp)
+		MFC0	v1, CP0_EPC
+		LONG_S	$7, PT_R7(sp)
+#ifdef CONFIG_64BIT
+		LONG_S	$8, PT_R8(sp)
+		LONG_S	$9, PT_R9(sp)
+#endif
+		LONG_S	v1, PT_EPC(sp)
+		LONG_S	$25, PT_R25(sp)
+		LONG_S	$28, PT_R28(sp)
+		LONG_S	$31, PT_R31(sp)
+		ori	$28, sp, _THREAD_MASK
+		xori	$28, _THREAD_MASK
+		.set	pop
+		.endm
+
+		.macro	SAVE_ALL
+		SAVE_SOME
+		SAVE_AT
+		SAVE_TEMP
+		SAVE_STATIC
+		.endm
+
+		.macro	RESTORE_AT
+		.set	push
+		.set	noat
+		LONG_L	$1,  PT_R1(sp)
+		.set	pop
+		.endm
+
+		.macro	RESTORE_TEMP
+#ifdef CONFIG_CPU_HAS_SMARTMIPS
+		LONG_L	$24, PT_ACX(sp)
+		mtlhx	$24
+		LONG_L	$24, PT_HI(sp)
+		mtlhx	$24
+		LONG_L	$24, PT_LO(sp)
+		mtlhx	$24
+#else
+		LONG_L	$24, PT_LO(sp)
+		mtlo	$24
+		LONG_L	$24, PT_HI(sp)
+		mthi	$24
+#endif
+#ifdef CONFIG_32BIT
+		LONG_L	$8, PT_R8(sp)
+		LONG_L	$9, PT_R9(sp)
+#endif
+		LONG_L	$10, PT_R10(sp)
+		LONG_L	$11, PT_R11(sp)
+		LONG_L	$12, PT_R12(sp)
+		LONG_L	$13, PT_R13(sp)
+		LONG_L	$14, PT_R14(sp)
+		LONG_L	$15, PT_R15(sp)
+		LONG_L	$24, PT_R24(sp)
+		.endm
+
+		.macro	RESTORE_STATIC
+		LONG_L	$16, PT_R16(sp)
+		LONG_L	$17, PT_R17(sp)
+		LONG_L	$18, PT_R18(sp)
+		LONG_L	$19, PT_R19(sp)
+		LONG_L	$20, PT_R20(sp)
+		LONG_L	$21, PT_R21(sp)
+		LONG_L	$22, PT_R22(sp)
+		LONG_L	$23, PT_R23(sp)
+		LONG_L	$30, PT_R30(sp)
+		.endm
+
+#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+
+		.macro	RESTORE_SOME
+		.set	push
+		.set	reorder
+		.set	noat
+		mfc0	a0, CP0_STATUS
+		li	v1, 0xff00
+		ori	a0, STATMASK
+		xori	a0, STATMASK
+		mtc0	a0, CP0_STATUS
+		and	a0, v1
+		LONG_L	v0, PT_STATUS(sp)
+		nor	v1, $0, v1
+		and	v0, v1
+		or	v0, a0
+		mtc0	v0, CP0_STATUS
+		LONG_L	$31, PT_R31(sp)
+		LONG_L	$28, PT_R28(sp)
+		LONG_L	$25, PT_R25(sp)
+		LONG_L	$7,  PT_R7(sp)
+		LONG_L	$6,  PT_R6(sp)
+		LONG_L	$5,  PT_R5(sp)
+		LONG_L	$4,  PT_R4(sp)
+		LONG_L	$3,  PT_R3(sp)
+		LONG_L	$2,  PT_R2(sp)
+		.set	pop
+		.endm
+
+		.macro	RESTORE_SP_AND_RET
+		.set	push
+		.set	noreorder
+		LONG_L	k0, PT_EPC(sp)
+		LONG_L	sp, PT_R29(sp)
+		jr	k0
+		 rfe
+		.set	pop
+		.endm
+
+#else
+		.macro	RESTORE_SOME
+		.set	push
+		.set	reorder
+		.set	noat
+#ifdef CONFIG_MIPS_MT_SMTC
+		.set	mips32r2
+		/*
+		 * We need to make sure the read-modify-write
+		 * of Status below isn't perturbed by an interrupt
+		 * or cross-TC access, so we need to do at least a DMT,
+		 * protected by an interrupt-inhibit. But setting IXMT
+		 * also creates a few-cycle window where an IPI could
+		 * be queued and not be detected before potentially
+		 * returning to a WAIT or user-mode loop. It must be
+		 * replayed.
+		 *
+		 * We're in the middle of a context switch, and
+		 * we can't dispatch it directly without trashing
+		 * some registers, so we'll try to detect this unlikely
+		 * case and program a software interrupt in the VPE,
+		 * as would be done for a cross-VPE IPI.  To accomodate
+		 * the handling of that case, we're doing a DVPE instead
+		 * of just a DMT here to protect against other threads.
+		 * This is a lot of cruft to cover a tiny window.
+		 * If you can find a better design, implement it!
+		 *
+		 */
+		mfc0	v0, CP0_TCSTATUS
+		ori	v0, TCSTATUS_IXMT
+		mtc0	v0, CP0_TCSTATUS
+		_ehb
+		DVPE	5				# dvpe a1
+		jal	mips_ihb
+#endif /* CONFIG_MIPS_MT_SMTC */
+		mfc0	a0, CP0_STATUS
+		ori	a0, STATMASK
+		xori	a0, STATMASK
+		mtc0	a0, CP0_STATUS
+		li	v1, 0xff00
+		and	a0, v1
+		LONG_L	v0, PT_STATUS(sp)
+		nor	v1, $0, v1
+		and	v0, v1
+		or	v0, a0
+		mtc0	v0, CP0_STATUS
+#ifdef CONFIG_MIPS_MT_SMTC
+/*
+ * Only after EXL/ERL have been restored to status can we
+ * restore TCStatus.IXMT.
+ */
+		LONG_L	v1, PT_TCSTATUS(sp)
+		_ehb
+		mfc0	a0, CP0_TCSTATUS
+		andi	v1, TCSTATUS_IXMT
+		bnez	v1, 0f
+
+/*
+ * We'd like to detect any IPIs queued in the tiny window
+ * above and request an software interrupt to service them
+ * when we ERET.
+ *
+ * Computing the offset into the IPIQ array of the executing
+ * TC's IPI queue in-line would be tedious.  We use part of
+ * the TCContext register to hold 16 bits of offset that we
+ * can add in-line to find the queue head.
+ */
+		mfc0	v0, CP0_TCCONTEXT
+		la	a2, IPIQ
+		srl	v0, v0, 16
+		addu	a2, a2, v0
+		LONG_L	v0, 0(a2)
+		beqz	v0, 0f
+/*
+ * If we have a queue, provoke dispatch within the VPE by setting C_SW1
+ */
+		mfc0	v0, CP0_CAUSE
+		ori	v0, v0, C_SW1
+		mtc0	v0, CP0_CAUSE
+0:
+		/*
+		 * This test should really never branch but
+		 * let's be prudent here.  Having atomized
+		 * the shared register modifications, we can
+		 * now EVPE, and must do so before interrupts
+		 * are potentially re-enabled.
+		 */
+		andi	a1, a1, MVPCONTROL_EVP
+		beqz	a1, 1f
+		evpe
+1:
+		/* We know that TCStatua.IXMT should be set from above */
+		xori	a0, a0, TCSTATUS_IXMT
+		or	a0, a0, v1
+		mtc0	a0, CP0_TCSTATUS
+		_ehb
+
+		.set	mips0
+#endif /* CONFIG_MIPS_MT_SMTC */
+		LONG_L	v1, PT_EPC(sp)
+		MTC0	v1, CP0_EPC
+		LONG_L	$31, PT_R31(sp)
+		LONG_L	$28, PT_R28(sp)
+		LONG_L	$25, PT_R25(sp)
+#ifdef CONFIG_64BIT
+		LONG_L	$8, PT_R8(sp)
+		LONG_L	$9, PT_R9(sp)
+#endif
+		LONG_L	$7,  PT_R7(sp)
+		LONG_L	$6,  PT_R6(sp)
+		LONG_L	$5,  PT_R5(sp)
+		LONG_L	$4,  PT_R4(sp)
+		LONG_L	$3,  PT_R3(sp)
+		LONG_L	$2,  PT_R2(sp)
+		.set	pop
+		.endm
+
+		.macro	RESTORE_SP_AND_RET
+		LONG_L	sp, PT_R29(sp)
+		.set	mips3
+		eret
+		.set	mips0
+		.endm
+
+#endif
+
+		.macro	RESTORE_SP
+		LONG_L	sp, PT_R29(sp)
+		.endm
+
+		.macro	RESTORE_ALL
+		RESTORE_TEMP
+		RESTORE_STATIC
+		RESTORE_AT
+		RESTORE_SOME
+		RESTORE_SP
+		.endm
+
+		.macro	RESTORE_ALL_AND_RET
+		RESTORE_TEMP
+		RESTORE_STATIC
+		RESTORE_AT
+		RESTORE_SOME
+		RESTORE_SP_AND_RET
+		.endm
+
+/*
+ * Move to kernel mode and disable interrupts.
+ * Set cp0 enable bit as sign that we're running on the kernel stack
+ */
+		.macro	CLI
+#if !defined(CONFIG_MIPS_MT_SMTC)
+		mfc0	t0, CP0_STATUS
+		li	t1, ST0_CU0 | STATMASK
+		or	t0, t1
+		xori	t0, STATMASK
+		mtc0	t0, CP0_STATUS
+#else /* CONFIG_MIPS_MT_SMTC */
+		/*
+		 * For SMTC, we need to set privilege
+		 * and disable interrupts only for the
+		 * current TC, using the TCStatus register.
+		 */
+		mfc0	t0, CP0_TCSTATUS
+		/* Fortunately CU 0 is in the same place in both registers */
+		/* Set TCU0, TMX, TKSU (for later inversion) and IXMT */
+		li	t1, ST0_CU0 | 0x08001c00
+		or	t0, t1
+		/* Clear TKSU, leave IXMT */
+		xori	t0, 0x00001800
+		mtc0	t0, CP0_TCSTATUS
+		_ehb
+		/* We need to leave the global IE bit set, but clear EXL...*/
+		mfc0	t0, CP0_STATUS
+		ori	t0, ST0_EXL | ST0_ERL
+		xori	t0, ST0_EXL | ST0_ERL
+		mtc0	t0, CP0_STATUS
+#endif /* CONFIG_MIPS_MT_SMTC */
+		irq_disable_hazard
+		.endm
+
+/*
+ * Move to kernel mode and enable interrupts.
+ * Set cp0 enable bit as sign that we're running on the kernel stack
+ */
+		.macro	STI
+#if !defined(CONFIG_MIPS_MT_SMTC)
+		mfc0	t0, CP0_STATUS
+		li	t1, ST0_CU0 | STATMASK
+		or	t0, t1
+		xori	t0, STATMASK & ~1
+		mtc0	t0, CP0_STATUS
+#else /* CONFIG_MIPS_MT_SMTC */
+		/*
+		 * For SMTC, we need to set privilege
+		 * and enable interrupts only for the
+		 * current TC, using the TCStatus register.
+		 */
+		_ehb
+		mfc0	t0, CP0_TCSTATUS
+		/* Fortunately CU 0 is in the same place in both registers */
+		/* Set TCU0, TKSU (for later inversion) and IXMT */
+		li	t1, ST0_CU0 | 0x08001c00
+		or	t0, t1
+		/* Clear TKSU *and* IXMT */
+		xori	t0, 0x00001c00
+		mtc0	t0, CP0_TCSTATUS
+		_ehb
+		/* We need to leave the global IE bit set, but clear EXL...*/
+		mfc0	t0, CP0_STATUS
+		ori	t0, ST0_EXL
+		xori	t0, ST0_EXL
+		mtc0	t0, CP0_STATUS
+		/* irq_enable_hazard below should expand to EHB for 24K/34K cpus */
+#endif /* CONFIG_MIPS_MT_SMTC */
+		irq_enable_hazard
+		.endm
+
+/*
+ * Just move to kernel mode and leave interrupts as they are.  Note
+ * for the R3000 this means copying the previous enable from IEp.
+ * Set cp0 enable bit as sign that we're running on the kernel stack
+ */
+		.macro	KMODE
+#ifdef CONFIG_MIPS_MT_SMTC
+		/*
+		 * This gets baroque in SMTC.  We want to
+		 * protect the non-atomic clearing of EXL
+		 * with DMT/EMT, but we don't want to take
+		 * an interrupt while DMT is still in effect.
+		 */
+
+		/* KMODE gets invoked from both reorder and noreorder code */
+		.set	push
+		.set	mips32r2
+		.set	noreorder
+		mfc0	v0, CP0_TCSTATUS
+		andi	v1, v0, TCSTATUS_IXMT
+		ori	v0, TCSTATUS_IXMT
+		mtc0	v0, CP0_TCSTATUS
+		_ehb
+		DMT	2				# dmt	v0
+		/*
+		 * We don't know a priori if ra is "live"
+		 */
+		move	t0, ra
+		jal	mips_ihb
+		nop	/* delay slot */
+		move	ra, t0
+#endif /* CONFIG_MIPS_MT_SMTC */
+		mfc0	t0, CP0_STATUS
+		li	t1, ST0_CU0 | (STATMASK & ~1)
+#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+		andi	t2, t0, ST0_IEP
+		srl	t2, 2
+		or	t0, t2
+#endif
+		or	t0, t1
+		xori	t0, STATMASK & ~1
+		mtc0	t0, CP0_STATUS
+#ifdef CONFIG_MIPS_MT_SMTC
+		_ehb
+		andi	v0, v0, VPECONTROL_TE
+		beqz	v0, 2f
+		nop	/* delay slot */
+		emt
+2:
+		mfc0	v0, CP0_TCSTATUS
+		/* Clear IXMT, then OR in previous value */
+		ori	v0, TCSTATUS_IXMT
+		xori	v0, TCSTATUS_IXMT
+		or	v0, v1, v0
+		mtc0	v0, CP0_TCSTATUS
+		/*
+		 * irq_disable_hazard below should expand to EHB
+		 * on 24K/34K CPUS
+		 */
+		.set pop
+#endif /* CONFIG_MIPS_MT_SMTC */
+		irq_disable_hazard
+		.endm
+
+#endif /* _ASM_STACKFRAME_H */