Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (141 commits)
  MIPS: Alchemy: defconfig updates
  MIPS: Alchemy: Fix Au1100 ethernet build failure
  MIPS: Alchemy: Repair db1500/bosporus builds
  MIPS: ARC: Cleanup unused definitions from sgialib.h
  MIPS: Cobalt: convert legacy port addresses to GT-64111 bus addresses
  MIPS: Alchemy: use 36bit addresses for PCMCIA resources.
  MIPS: Cobalt: Fix theoretical port aliasing issue
  MIPS: Use ALIGN(x, bytes) instead of __ALIGN_MASK(x, bytes - 1)
  MIPS: Crazy spinlock speed test.
  MIPS: Optimize spinlocks.
  MIPS: Alchemy: devboard PM needs to save CPLD registers.
  MIPS: PowerTV: Eliminate duplicate opcode definition macros
  MIPS: Lemote 2F: Move printks out of port_access_lock.
  MIPS: PNX833x: Convert IRQ controller locks to raw spinlocks.
  MIPS: Octeon: Replace spinlock with raw_spinlocks in dma-octeon.c.
  MIPS: Octeon: Replace rwlocks in irq_chip handlers with raw_spinlocks.
  MIPS: Octeon: Convert octeon_irq_msi_lock to raw spinlock.
  MIPS: Loongson: Remove pointless sample_lock from oprofile code.
  MIPS: SNI: Convert sni_rm200_i8259A_lock to raw spinlock.
  MIPS: i8259: Convert IRQ controller lock to raw spinlock.
  ...

1 files changed, 85 insertions, 0 deletions

diff --git a/arch/mips/cavium-octeon/octeon-platform.c b/arch/mips/cavium-octeon/octeon-platform.c
index cfdb4c2ac5c3..62ac30eef5e8 100644
--- a/arch/mips/cavium-octeon/octeon-platform.c
+++ b/arch/mips/cavium-octeon/octeon-platform.c
@@ -9,6 +9,7 @@
 
 #include <linux/init.h>
 #include <linux/irq.h>
+#include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
@@ -159,6 +160,90 @@ out:
 }
 device_initcall(octeon_rng_device_init);
 
+static struct i2c_board_info __initdata octeon_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("ds1337", 0x68),
+	},
+};
+
+static int __init octeon_i2c_devices_init(void)
+{
+	return i2c_register_board_info(0, octeon_i2c_devices,
+				       ARRAY_SIZE(octeon_i2c_devices));
+}
+arch_initcall(octeon_i2c_devices_init);
+
+#define OCTEON_I2C_IO_BASE 0x1180000001000ull
+#define OCTEON_I2C_IO_UNIT_OFFSET 0x200
+
+static struct octeon_i2c_data octeon_i2c_data[2];
+
+static int __init octeon_i2c_device_init(void)
+{
+	struct platform_device *pd;
+	int ret = 0;
+	int port, num_ports;
+
+	struct resource i2c_resources[] = {
+		{
+			.flags	= IORESOURCE_MEM,
+		}, {
+			.flags	= IORESOURCE_IRQ,
+		}
+	};
+
+	if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN52XX))
+		num_ports = 2;
+	else
+		num_ports = 1;
+
+	for (port = 0; port < num_ports; port++) {
+		octeon_i2c_data[port].sys_freq = octeon_get_clock_rate();
+		/*FIXME: should be examined. At the moment is set for 100Khz */
+		octeon_i2c_data[port].i2c_freq = 100000;
+
+		pd = platform_device_alloc("i2c-octeon", port);
+		if (!pd) {
+			ret = -ENOMEM;
+			goto out;
+		}
+
+		pd->dev.platform_data = octeon_i2c_data + port;
+
+		i2c_resources[0].start =
+			OCTEON_I2C_IO_BASE + (port * OCTEON_I2C_IO_UNIT_OFFSET);
+		i2c_resources[0].end = i2c_resources[0].start + 0x1f;
+		switch (port) {
+		case 0:
+			i2c_resources[1].start = OCTEON_IRQ_TWSI;
+			i2c_resources[1].end = OCTEON_IRQ_TWSI;
+			break;
+		case 1:
+			i2c_resources[1].start = OCTEON_IRQ_TWSI2;
+			i2c_resources[1].end = OCTEON_IRQ_TWSI2;
+			break;
+		default:
+			BUG();
+		}
+
+		ret = platform_device_add_resources(pd,
+						    i2c_resources,
+						    ARRAY_SIZE(i2c_resources));
+		if (ret)
+			goto fail;
+
+		ret = platform_device_add(pd);
+		if (ret)
+			goto fail;
+	}
+	return ret;
+fail:
+	platform_device_put(pd);
+out:
+	return ret;
+}
+device_initcall(octeon_i2c_device_init);
+
 /* Octeon SMI/MDIO interface.  */
 static int __init octeon_mdiobus_device_init(void)
 {