Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for MIPS for 4.7.  Here's the summary of
  the changes:

   - ATH79: Support for DTB passuing using the UHI boot protocol
   - ATH79: Remove support for builtin DTB.
   - ATH79: Add zboot debug serial support.
   - ATH79: Add initial support for Dragino MS14 (Dragine 2), Onion Omega
            and DPT-Module.
   - ATH79: Update devicetree clock support for AR9132 and AR9331.
   - ATH79: Cleanup the DT code.
   - ATH79: Support newer SOCs in ath79_ddr_ctrl_init.
   - ATH79: Fix regression in PCI window initialization.
   - BCM47xx: Move SPROM driver to drivers/firmware/
   - BCM63xx: Enable partition parser in defconfig.
   - BMIPS: BMIPS5000 has I cache filing from D cache
   - BMIPS: BMIPS: Add cpu-feature-overrides.h
   - BMIPS: Add Whirlwind support
   - BMIPS: Adjust mips-hpt-frequency for BCM7435
   - BMIPS: Remove maxcpus from BCM97435SVMB DTS
   - BMIPS: Add missing 7038 L1 register cells to BCM7435
   - BMIPS: Various tweaks to initialization code.
   - BMIPS: Enable partition parser in defconfig.
   - BMIPS: Cache tweaks.
   - BMIPS: Add UART, I2C and SATA devices to DT.
   - BMIPS: Add BCM6358 and BCM63268support
   - BMIPS: Add device tree example for BCM6358.
   - BMIPS: Improve Improve BCM6328 and BCM6368 device trees
   - Lantiq: Add support for device tree file from boot loader
   - Lantiq: Allow build with no built-in DT.
   - Loongson 3: Reserve 32MB for RS780E integrated GPU.
   - Loongson 3: Fix build error after ld-version.sh modification
   - Loongson 3: Move chipset ACPI code from drivers to arch.
   - Loongson 3: Speedup irq processing.
   - Loongson 3: Add basic Loongson 3A support.
   - Loongson 3: Set cache flush handlers to nop.
   - Loongson 3: Invalidate special TLBs when needed.
   - Loongson 3: Fast TLB refill handler.
   - MT7620: Fallback strategy for invalid syscfg0.
   - Netlogic: Fix CP0_EBASE redefinition warnings
   - Octeon: Initialization fixes
   - Octeon: Add DTS files for the D-Link DSR-1000N and EdgeRouter Lite
   - Octeon: Enable add Octeon-drivers in cavium_octeon_defconfig
   - Octeon: Correctly handle endian-swapped initramfs images.
   - Octeon: Support CN73xx, CN75xx and CN78xx.
   - Octeon: Remove dead code from cvmx-sysinfo.
   - Octeon: Extend number of supported CPUs past 32.
   - Octeon: Remove some code limiting NR_IRQS to 255.
   - Octeon: Simplify octeon_irq_ciu_gpio_set_type.
   - Octeon: Mark some functions __init in smp.c
   - Octeon: Octeon: Add Octeon III CN7xxx interface detection
   - PIC32: Add serial driver and bindings for it.
   - PIC32: Add PIC32 deadman timer driver and bindings.
   - PIC32: Add PIC32 clock timer driver and bindings.
   - Pistachio: Determine SoC revision during boot
   - Sibyte: Fix Kconfig dependencies of SIBYTE_BUS_WATCHER.
   - Sibyte: Strip redundant comments from bcm1480_regs.h.
   - Panic immediately if panic_on_oops is set.
   - module: fix incorrect IS_ERR_VALUE macro usage.
   - module: Make consistent use of pr_*
   - Remove no longer needed work_on_cpu() call.
   - Remove CONFIG_IPV6_PRIVACY from defconfigs.
   - Fix registers of non-crashing CPUs in dumps.
   - Handle MIPSisms in new vmcore_elf32_check_arch.
   - Select CONFIG_HANDLE_DOMAIN_IRQ and make it work.
   - Allow RIXI to be used on non-R2 or R6 cores.
   - Reserve nosave data for hibernation
   - Fix siginfo.h to use strict POSIX types.
   - Don't unwind user mode with EVA.
   - Fix watchpoint restoration
   - Ptrace watchpoints for R6.
   - Sync icache when it fills from dcache
   - I6400 I-cache fills from dcache.
   - Various MSA fixes.
   - Cleanup MIPS_CPU_* definitions.
   - Signal: Move generic copy_siginfo to signal.h
   - Signal: Fix uapi include in exported asm/siginfo.h
   - Timer fixes for sake of KVM.
   - XPA TLB refill fixes.
   - Treat perf counter feature
   - Update John Crispin's email address
   - Add PIC32 watchdog and bindings.
   - Handle R10000 LL/SC bug in set_pte()
   - cpufreq: Various fixes for Longson1.
   - R6: Fix R2 emulation.
   - mathemu: Cosmetic fix to ADDIUPC emulation, plenty of other small fixes
   - ELF: ABI and FP fixes.
   - Allow for relocatable kernel and use that to support KASLR.
   - Fix CPC_BASE_ADDR mask
   - Plenty fo smp-cps, CM, R6 and M6250 fixes.
   - Make reset_control_ops const.
   - Fix kernel command line handling of leading whitespace.
   - Cleanups to cache handling.
   - Add brcm, bcm6345-l1-intc device tree bindings.
   - Use generic clkdev.h header
   - Remove CLK_IS_ROOT usage.
   - Misc small cleanups.
   - CM: Fix compilation error when !MIPS_CM
   - oprofile: Fix a preemption issue
   - Detect DSP ASE v3 support:1"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (275 commits)
  MIPS: pic32mzda: fix getting timer clock rate.
  MIPS: ath79: fix regression in PCI window initialization
  MIPS: ath79: make ath79_ddr_ctrl_init() compatible for newer SoCs
  MIPS: Fix VZ probe gas errors with binutils <2.24
  MIPS: perf: Fix I6400 event numbers
  MIPS: DEC: Export `ioasic_ssr_lock' to modules
  MIPS: MSA: Fix a link error on `_init_msa_upper' with older GCC
  MIPS: CM: Fix compilation error when !MIPS_CM
  MIPS: Fix genvdso error on rebuild
  USB: ohci-jz4740: Remove obsolete driver
  MIPS: JZ4740: Probe OHCI platform device via DT
  MIPS: JZ4740: Qi LB60: Remove support for AVT2 variant
  MIPS: pistachio: Determine SoC revision during boot
  MIPS: BMIPS: Adjust mips-hpt-frequency for BCM7435
  mips: mt7620: fallback to SDRAM when syscfg0 does not have a valid value for the memory type
  MIPS: Prevent "restoration" of MSA context in non-MSA kernels
  MIPS: cevt-r4k: Dynamically calculate min_delta_ns
  MIPS: malta-time: Take seconds into account
  MIPS: malta-time: Start GIC count before syncing to RTC
  MIPS: Force CPUs to lose FP context during mode switches
  ...

4 files changed, 205 insertions, 105 deletions

diff --git a/arch/mips/ath79/Kconfig b/arch/mips/ath79/Kconfig
index 13c04cf54afa..dfc60209dc63 100644
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -71,18 +71,6 @@ config ATH79_MACH_UBNT_XM
 	  Say 'Y' here if you want your kernel to support the
 	  Ubiquiti Networks XM (rev 1.0) board.
 
-choice
-	prompt "Build a DTB in the kernel"
-	optional
-	help
-	  Select a devicetree that should be built into the kernel.
-
-	config DTB_TL_WR1043ND_V1
-		bool "TL-WR1043ND Version 1"
-		select BUILTIN_DTB
-		select SOC_AR913X
-endchoice
-
 endmenu
 
 config SOC_AR71XX
diff --git a/arch/mips/ath79/clock.c b/arch/mips/ath79/clock.c
index 618dfd735eed..2e7378467c5c 100644
--- a/arch/mips/ath79/clock.c
+++ b/arch/mips/ath79/clock.c
@@ -18,17 +18,21 @@
 #include <linux/clk.h>
 #include <linux/clkdev.h>
 #include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <dt-bindings/clock/ath79-clk.h>
 
 #include <asm/div64.h>
 
 #include <asm/mach-ath79/ath79.h>
 #include <asm/mach-ath79/ar71xx_regs.h>
 #include "common.h"
+#include "machtypes.h"
 
 #define AR71XX_BASE_FREQ	40000000
 #define AR724X_BASE_FREQ	40000000
 
-static struct clk *clks[3];
+static struct clk *clks[ATH79_CLK_END];
 static struct clk_onecell_data clk_data = {
 	.clks = clks,
 	.clk_num = ARRAY_SIZE(clks),
@@ -40,7 +44,7 @@ static struct clk *__init ath79_add_sys_clkdev(
 	struct clk *clk;
 	int err;
 
-	clk = clk_register_fixed_rate(NULL, id, NULL, CLK_IS_ROOT, rate);
+	clk = clk_register_fixed_rate(NULL, id, NULL, 0, rate);
 	if (!clk)
 		panic("failed to allocate %s clock structure", id);
 
@@ -78,107 +82,139 @@ static void __init ar71xx_clocks_init(void)
 	ahb_rate = cpu_rate / div;
 
 	ath79_add_sys_clkdev("ref", ref_rate);
-	clks[0] = ath79_add_sys_clkdev("cpu", cpu_rate);
-	clks[1] = ath79_add_sys_clkdev("ddr", ddr_rate);
-	clks[2] = ath79_add_sys_clkdev("ahb", ahb_rate);
+	clks[ATH79_CLK_CPU] = ath79_add_sys_clkdev("cpu", cpu_rate);
+	clks[ATH79_CLK_DDR] = ath79_add_sys_clkdev("ddr", ddr_rate);
+	clks[ATH79_CLK_AHB] = ath79_add_sys_clkdev("ahb", ahb_rate);
 
 	clk_add_alias("wdt", NULL, "ahb", NULL);
 	clk_add_alias("uart", NULL, "ahb", NULL);
 }
 
-static void __init ar724x_clocks_init(void)
+static struct clk * __init ath79_reg_ffclk(const char *name,
+		const char *parent_name, unsigned int mult, unsigned int div)
 {
-	unsigned long ref_rate;
-	unsigned long cpu_rate;
-	unsigned long ddr_rate;
-	unsigned long ahb_rate;
-	u32 pll;
-	u32 freq;
-	u32 div;
+	struct clk *clk;
 
-	ref_rate = AR724X_BASE_FREQ;
-	pll = ath79_pll_rr(AR724X_PLL_REG_CPU_CONFIG);
+	clk = clk_register_fixed_factor(NULL, name, parent_name, 0, mult, div);
+	if (!clk)
+		panic("failed to allocate %s clock structure", name);
 
-	div = ((pll >> AR724X_PLL_FB_SHIFT) & AR724X_PLL_FB_MASK);
-	freq = div * ref_rate;
+	return clk;
+}
 
+static void __init ar724x_clk_init(struct clk *ref_clk, void __iomem *pll_base)
+{
+	u32 pll;
+	u32 mult, div, ddr_div, ahb_div;
+
+	pll = __raw_readl(pll_base + AR724X_PLL_REG_CPU_CONFIG);
+
+	mult = ((pll >> AR724X_PLL_FB_SHIFT) & AR724X_PLL_FB_MASK);
 	div = ((pll >> AR724X_PLL_REF_DIV_SHIFT) & AR724X_PLL_REF_DIV_MASK) * 2;
-	freq /= div;
 
-	cpu_rate = freq;
+	ddr_div = ((pll >> AR724X_DDR_DIV_SHIFT) & AR724X_DDR_DIV_MASK) + 1;
+	ahb_div = (((pll >> AR724X_AHB_DIV_SHIFT) & AR724X_AHB_DIV_MASK) + 1) * 2;
 
-	div = ((pll >> AR724X_DDR_DIV_SHIFT) & AR724X_DDR_DIV_MASK) + 1;
-	ddr_rate = freq / div;
+	clks[ATH79_CLK_CPU] = ath79_reg_ffclk("cpu", "ref", mult, div);
+	clks[ATH79_CLK_DDR] = ath79_reg_ffclk("ddr", "ref", mult, div * ddr_div);
+	clks[ATH79_CLK_AHB] = ath79_reg_ffclk("ahb", "ref", mult, div * ahb_div);
+}
 
-	div = (((pll >> AR724X_AHB_DIV_SHIFT) & AR724X_AHB_DIV_MASK) + 1) * 2;
-	ahb_rate = cpu_rate / div;
+static void __init ar724x_clocks_init(void)
+{
+	struct clk *ref_clk;
 
-	ath79_add_sys_clkdev("ref", ref_rate);
-	clks[0] = ath79_add_sys_clkdev("cpu", cpu_rate);
-	clks[1] = ath79_add_sys_clkdev("ddr", ddr_rate);
-	clks[2] = ath79_add_sys_clkdev("ahb", ahb_rate);
+	ref_clk = ath79_add_sys_clkdev("ref", AR724X_BASE_FREQ);
+
+	ar724x_clk_init(ref_clk, ath79_pll_base);
+
+	/* just make happy plat_time_init() from arch/mips/ath79/setup.c */
+	clk_register_clkdev(clks[ATH79_CLK_CPU], "cpu", NULL);
+	clk_register_clkdev(clks[ATH79_CLK_DDR], "ddr", NULL);
+	clk_register_clkdev(clks[ATH79_CLK_AHB], "ahb", NULL);
 
 	clk_add_alias("wdt", NULL, "ahb", NULL);
 	clk_add_alias("uart", NULL, "ahb", NULL);
 }
 
-static void __init ar933x_clocks_init(void)
+static void __init ar9330_clk_init(struct clk *ref_clk, void __iomem *pll_base)
 {
-	unsigned long ref_rate;
-	unsigned long cpu_rate;
-	unsigned long ddr_rate;
-	unsigned long ahb_rate;
 	u32 clock_ctrl;
-	u32 cpu_config;
-	u32 freq;
-	u32 t;
+	u32 ref_div;
+	u32 ninit_mul;
+	u32 out_div;
 
-	t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
-	if (t & AR933X_BOOTSTRAP_REF_CLK_40)
-		ref_rate = (40 * 1000 * 1000);
-	else
-		ref_rate = (25 * 1000 * 1000);
+	u32 cpu_div;
+	u32 ddr_div;
+	u32 ahb_div;
 
-	clock_ctrl = ath79_pll_rr(AR933X_PLL_CLOCK_CTRL_REG);
+	clock_ctrl = __raw_readl(pll_base + AR933X_PLL_CLOCK_CTRL_REG);
 	if (clock_ctrl & AR933X_PLL_CLOCK_CTRL_BYPASS) {
-		cpu_rate = ref_rate;
-		ahb_rate = ref_rate;
-		ddr_rate = ref_rate;
+		ref_div = 1;
+		ninit_mul = 1;
+		out_div = 1;
+
+		cpu_div = 1;
+		ddr_div = 1;
+		ahb_div = 1;
 	} else {
-		cpu_config = ath79_pll_rr(AR933X_PLL_CPU_CONFIG_REG);
+		u32 cpu_config;
+		u32 t;
+
+		cpu_config = __raw_readl(pll_base + AR933X_PLL_CPU_CONFIG_REG);
 
 		t = (cpu_config >> AR933X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
 		    AR933X_PLL_CPU_CONFIG_REFDIV_MASK;
-		freq = ref_rate / t;
+		ref_div = t;
 
-		t = (cpu_config >> AR933X_PLL_CPU_CONFIG_NINT_SHIFT) &
+		ninit_mul = (cpu_config >> AR933X_PLL_CPU_CONFIG_NINT_SHIFT) &
 		    AR933X_PLL_CPU_CONFIG_NINT_MASK;
-		freq *= t;
 
 		t = (cpu_config >> AR933X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
 		    AR933X_PLL_CPU_CONFIG_OUTDIV_MASK;
 		if (t == 0)
 			t = 1;
 
-		freq >>= t;
+		out_div = (1 << t);
 
-		t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_CPU_DIV_SHIFT) &
+		cpu_div = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_CPU_DIV_SHIFT) &
 		     AR933X_PLL_CLOCK_CTRL_CPU_DIV_MASK) + 1;
-		cpu_rate = freq / t;
 
-		t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_DDR_DIV_SHIFT) &
+		ddr_div = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_DDR_DIV_SHIFT) &
 		      AR933X_PLL_CLOCK_CTRL_DDR_DIV_MASK) + 1;
-		ddr_rate = freq / t;
 
-		t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_AHB_DIV_SHIFT) &
+		ahb_div = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_AHB_DIV_SHIFT) &
 		     AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK) + 1;
-		ahb_rate = freq / t;
 	}
 
-	ath79_add_sys_clkdev("ref", ref_rate);
-	clks[0] = ath79_add_sys_clkdev("cpu", cpu_rate);
-	clks[1] = ath79_add_sys_clkdev("ddr", ddr_rate);
-	clks[2] = ath79_add_sys_clkdev("ahb", ahb_rate);
+	clks[ATH79_CLK_CPU] = ath79_reg_ffclk("cpu", "ref",
+					ninit_mul, ref_div * out_div * cpu_div);
+	clks[ATH79_CLK_DDR] = ath79_reg_ffclk("ddr", "ref",
+					ninit_mul, ref_div * out_div * ddr_div);
+	clks[ATH79_CLK_AHB] = ath79_reg_ffclk("ahb", "ref",
+					ninit_mul, ref_div * out_div * ahb_div);
+}
+
+static void __init ar933x_clocks_init(void)
+{
+	struct clk *ref_clk;
+	unsigned long ref_rate;
+	u32 t;
+
+	t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
+	if (t & AR933X_BOOTSTRAP_REF_CLK_40)
+		ref_rate = (40 * 1000 * 1000);
+	else
+		ref_rate = (25 * 1000 * 1000);
+
+	ref_clk = ath79_add_sys_clkdev("ref", ref_rate);
+
+	ar9330_clk_init(ref_clk, ath79_pll_base);
+
+	/* just make happy plat_time_init() from arch/mips/ath79/setup.c */
+	clk_register_clkdev(clks[ATH79_CLK_CPU], "cpu", NULL);
+	clk_register_clkdev(clks[ATH79_CLK_DDR], "ddr", NULL);
+	clk_register_clkdev(clks[ATH79_CLK_AHB], "ahb", NULL);
 
 	clk_add_alias("wdt", NULL, "ahb", NULL);
 	clk_add_alias("uart", NULL, "ref", NULL);
@@ -310,9 +346,9 @@ static void __init ar934x_clocks_init(void)
 		ahb_rate = cpu_pll / (postdiv + 1);
 
 	ath79_add_sys_clkdev("ref", ref_rate);
-	clks[0] = ath79_add_sys_clkdev("cpu", cpu_rate);
-	clks[1] = ath79_add_sys_clkdev("ddr", ddr_rate);
-	clks[2] = ath79_add_sys_clkdev("ahb", ahb_rate);
+	clks[ATH79_CLK_CPU] = ath79_add_sys_clkdev("cpu", cpu_rate);
+	clks[ATH79_CLK_DDR] = ath79_add_sys_clkdev("ddr", ddr_rate);
+	clks[ATH79_CLK_AHB] = ath79_add_sys_clkdev("ahb", ahb_rate);
 
 	clk_add_alias("wdt", NULL, "ref", NULL);
 	clk_add_alias("uart", NULL, "ref", NULL);
@@ -397,9 +433,9 @@ static void __init qca955x_clocks_init(void)
 		ahb_rate = cpu_pll / (postdiv + 1);
 
 	ath79_add_sys_clkdev("ref", ref_rate);
-	clks[0] = ath79_add_sys_clkdev("cpu", cpu_rate);
-	clks[1] = ath79_add_sys_clkdev("ddr", ddr_rate);
-	clks[2] = ath79_add_sys_clkdev("ahb", ahb_rate);
+	clks[ATH79_CLK_CPU] = ath79_add_sys_clkdev("cpu", cpu_rate);
+	clks[ATH79_CLK_DDR] = ath79_add_sys_clkdev("ddr", ddr_rate);
+	clks[ATH79_CLK_AHB] = ath79_add_sys_clkdev("ahb", ahb_rate);
 
 	clk_add_alias("wdt", NULL, "ref", NULL);
 	clk_add_alias("uart", NULL, "ref", NULL);
@@ -419,8 +455,6 @@ void __init ath79_clocks_init(void)
 		qca955x_clocks_init();
 	else
 		BUG();
-
-	of_clk_init(NULL);
 }
 
 unsigned long __init
@@ -447,8 +481,49 @@ static void __init ath79_clocks_init_dt(struct device_node *np)
 
 CLK_OF_DECLARE(ar7100, "qca,ar7100-pll", ath79_clocks_init_dt);
 CLK_OF_DECLARE(ar7240, "qca,ar7240-pll", ath79_clocks_init_dt);
-CLK_OF_DECLARE(ar9130, "qca,ar9130-pll", ath79_clocks_init_dt);
-CLK_OF_DECLARE(ar9330, "qca,ar9330-pll", ath79_clocks_init_dt);
 CLK_OF_DECLARE(ar9340, "qca,ar9340-pll", ath79_clocks_init_dt);
 CLK_OF_DECLARE(ar9550, "qca,qca9550-pll", ath79_clocks_init_dt);
+
+static void __init ath79_clocks_init_dt_ng(struct device_node *np)
+{
+	struct clk *ref_clk;
+	void __iomem *pll_base;
+	const char *dnfn = of_node_full_name(np);
+
+	ref_clk = of_clk_get(np, 0);
+	if (IS_ERR(ref_clk)) {
+		pr_err("%s: of_clk_get failed\n", dnfn);
+		goto err;
+	}
+
+	pll_base = of_iomap(np, 0);
+	if (!pll_base) {
+		pr_err("%s: can't map pll registers\n", dnfn);
+		goto err_clk;
+	}
+
+	if (of_device_is_compatible(np, "qca,ar9130-pll"))
+		ar724x_clk_init(ref_clk, pll_base);
+	else if (of_device_is_compatible(np, "qca,ar9330-pll"))
+		ar9330_clk_init(ref_clk, pll_base);
+	else {
+		pr_err("%s: could not find any appropriate clk_init()\n", dnfn);
+		goto err_clk;
+	}
+
+	if (of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data)) {
+		pr_err("%s: could not register clk provider\n", dnfn);
+		goto err_clk;
+	}
+
+	return;
+
+err_clk:
+	clk_put(ref_clk);
+
+err:
+	return;
+}
+CLK_OF_DECLARE(ar9130_clk, "qca,ar9130-pll", ath79_clocks_init_dt_ng);
+CLK_OF_DECLARE(ar9330_clk, "qca,ar9330-pll", ath79_clocks_init_dt_ng);
 #endif
diff --git a/arch/mips/ath79/common.c b/arch/mips/ath79/common.c
index 3cedd1f95e0f..d071a3a0f876 100644
--- a/arch/mips/ath79/common.c
+++ b/arch/mips/ath79/common.c
@@ -46,12 +46,12 @@ void ath79_ddr_ctrl_init(void)
 {
 	ath79_ddr_base = ioremap_nocache(AR71XX_DDR_CTRL_BASE,
 					 AR71XX_DDR_CTRL_SIZE);
-	if (soc_is_ar71xx() || soc_is_ar934x()) {
-		ath79_ddr_wb_flush_base = ath79_ddr_base + 0x9c;
-		ath79_ddr_pci_win_base = ath79_ddr_base + 0x7c;
-	} else {
+	if (soc_is_ar913x() || soc_is_ar724x() || soc_is_ar933x()) {
 		ath79_ddr_wb_flush_base = ath79_ddr_base + 0x7c;
 		ath79_ddr_pci_win_base = 0;
+	} else {
+		ath79_ddr_wb_flush_base = ath79_ddr_base + 0x9c;
+		ath79_ddr_pci_win_base = ath79_ddr_base + 0x7c;
 	}
 }
 EXPORT_SYMBOL_GPL(ath79_ddr_ctrl_init);
@@ -76,14 +76,14 @@ void ath79_ddr_set_pci_windows(void)
 {
 	BUG_ON(!ath79_ddr_pci_win_base);
 
-	__raw_writel(AR71XX_PCI_WIN0_OFFS, ath79_ddr_pci_win_base + 0);
-	__raw_writel(AR71XX_PCI_WIN1_OFFS, ath79_ddr_pci_win_base + 1);
-	__raw_writel(AR71XX_PCI_WIN2_OFFS, ath79_ddr_pci_win_base + 2);
-	__raw_writel(AR71XX_PCI_WIN3_OFFS, ath79_ddr_pci_win_base + 3);
-	__raw_writel(AR71XX_PCI_WIN4_OFFS, ath79_ddr_pci_win_base + 4);
-	__raw_writel(AR71XX_PCI_WIN5_OFFS, ath79_ddr_pci_win_base + 5);
-	__raw_writel(AR71XX_PCI_WIN6_OFFS, ath79_ddr_pci_win_base + 6);
-	__raw_writel(AR71XX_PCI_WIN7_OFFS, ath79_ddr_pci_win_base + 7);
+	__raw_writel(AR71XX_PCI_WIN0_OFFS, ath79_ddr_pci_win_base + 0x0);
+	__raw_writel(AR71XX_PCI_WIN1_OFFS, ath79_ddr_pci_win_base + 0x4);
+	__raw_writel(AR71XX_PCI_WIN2_OFFS, ath79_ddr_pci_win_base + 0x8);
+	__raw_writel(AR71XX_PCI_WIN3_OFFS, ath79_ddr_pci_win_base + 0xc);
+	__raw_writel(AR71XX_PCI_WIN4_OFFS, ath79_ddr_pci_win_base + 0x10);
+	__raw_writel(AR71XX_PCI_WIN5_OFFS, ath79_ddr_pci_win_base + 0x14);
+	__raw_writel(AR71XX_PCI_WIN6_OFFS, ath79_ddr_pci_win_base + 0x18);
+	__raw_writel(AR71XX_PCI_WIN7_OFFS, ath79_ddr_pci_win_base + 0x1c);
 }
 EXPORT_SYMBOL_GPL(ath79_ddr_set_pci_windows);
 
diff --git a/arch/mips/ath79/setup.c b/arch/mips/ath79/setup.c
index be451ee4a5ea..7adab180e0ca 100644
--- a/arch/mips/ath79/setup.c
+++ b/arch/mips/ath79/setup.c
@@ -17,6 +17,7 @@
 #include <linux/bootmem.h>
 #include <linux/err.h>
 #include <linux/clk.h>
+#include <linux/clk-provider.h>
 #include <linux/of_platform.h>
 #include <linux/of_fdt.h>
 
@@ -203,26 +204,57 @@ void __init plat_mem_setup(void)
 	fdt_start = fw_getenvl("fdt_start");
 	if (fdt_start)
 		__dt_setup_arch((void *)KSEG0ADDR(fdt_start));
-#ifdef CONFIG_BUILTIN_DTB
-	else
-		__dt_setup_arch(__dtb_start);
-#endif
+	else if (fw_arg0 == -2)
+		__dt_setup_arch((void *)KSEG0ADDR(fw_arg1));
 
-	ath79_reset_base = ioremap_nocache(AR71XX_RESET_BASE,
-					   AR71XX_RESET_SIZE);
-	ath79_pll_base = ioremap_nocache(AR71XX_PLL_BASE,
-					 AR71XX_PLL_SIZE);
-	ath79_detect_sys_type();
-	ath79_ddr_ctrl_init();
+	if (mips_machtype != ATH79_MACH_GENERIC_OF) {
+		ath79_reset_base = ioremap_nocache(AR71XX_RESET_BASE,
+						   AR71XX_RESET_SIZE);
+		ath79_pll_base = ioremap_nocache(AR71XX_PLL_BASE,
+						 AR71XX_PLL_SIZE);
+		ath79_detect_sys_type();
+		ath79_ddr_ctrl_init();
 
-	if (mips_machtype != ATH79_MACH_GENERIC_OF)
 		detect_memory_region(0, ATH79_MEM_SIZE_MIN, ATH79_MEM_SIZE_MAX);
 
-	_machine_restart = ath79_restart;
+		/* OF machines should use the reset driver */
+		_machine_restart = ath79_restart;
+	}
+
 	_machine_halt = ath79_halt;
 	pm_power_off = ath79_halt;
 }
 
+static void __init ath79_of_plat_time_init(void)
+{
+	struct device_node *np;
+	struct clk *clk;
+	unsigned long cpu_clk_rate;
+
+	of_clk_init(NULL);
+
+	np = of_get_cpu_node(0, NULL);
+	if (!np) {
+		pr_err("Failed to get CPU node\n");
+		return;
+	}
+
+	clk = of_clk_get(np, 0);
+	if (IS_ERR(clk)) {
+		pr_err("Failed to get CPU clock: %ld\n", PTR_ERR(clk));
+		return;
+	}
+
+	cpu_clk_rate = clk_get_rate(clk);
+
+	pr_info("CPU clock: %lu.%03lu MHz\n",
+		cpu_clk_rate / 1000000, (cpu_clk_rate / 1000) % 1000);
+
+	mips_hpt_frequency = cpu_clk_rate / 2;
+
+	clk_put(clk);
+}
+
 void __init plat_time_init(void)
 {
 	unsigned long cpu_clk_rate;
@@ -230,6 +262,11 @@ void __init plat_time_init(void)
 	unsigned long ddr_clk_rate;
 	unsigned long ref_clk_rate;
 
+	if (IS_ENABLED(CONFIG_OF) && mips_machtype == ATH79_MACH_GENERIC_OF) {
+		ath79_of_plat_time_init();
+		return;
+	}
+
 	ath79_clocks_init();
 
 	cpu_clk_rate = ath79_get_sys_clk_rate("cpu");