CRIS: Drop support for the CRIS port

The port was added back in 2000 so it's no longer even a good source
of inspiration for newer ports (if it ever was)

The last SoC (ARTPEC-3) with a CRIS main CPU was launched in 2008.

Coupled with time and working developer board hardware being
in low supply, it's time to drop the port from Linux.

So long and thanks for all the fish!

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 0 insertions, 561 deletions

diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig
deleted file mode 100644
index 8792af63c049..000000000000
--- a/arch/cris/arch-v10/drivers/Kconfig
+++ /dev/null
@@ -1,561 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-if ETRAX_ARCH_V10
-
-config ETRAX_ETHERNET
-	bool "Ethernet support"
-	depends on ETRAX_ARCH_V10 && NETDEVICES
-	select MII
-	help
-	  This option enables the ETRAX 100LX built-in 10/100Mbit Ethernet
-	  controller.
-
-config ETRAX_SERIAL
-	bool "Serial-port support"
-	depends on ETRAX_ARCH_V10
-	help
-	  Enables the ETRAX 100 serial driver for ser0 (ttyS0)
-	  You probably want this enabled.
-
-config ETRAX_SERIAL_FAST_TIMER
-	bool "Use fast timers for serial DMA flush (experimental)"
-	depends on ETRAX_SERIAL
-	help
-	  Select this to have the serial DMAs flushed at a higher rate than
-	  normally, possible by using the fast timer API, the timeout is
-	  approx. 4 character times.
-	  If unsure, say N.
-
-config ETRAX_SERIAL_FLUSH_DMA_FAST
-	bool "Fast serial port DMA flush"
-	depends on ETRAX_SERIAL && !ETRAX_SERIAL_FAST_TIMER
-	help
-	  Select this to have the serial DMAs flushed at a higher rate than
-	  normally possible through a fast timer interrupt (currently at
-	  15360 Hz).
-	  If unsure, say N.
-
-config ETRAX_SERIAL_RX_TIMEOUT_TICKS
-	int "Receive flush timeout (ticks) "
-	depends on ETRAX_SERIAL && !ETRAX_SERIAL_FAST_TIMER && !ETRAX_SERIAL_FLUSH_DMA_FAST
-	default "5"
-	help
-	  Number of timer ticks between flush of receive fifo (1 tick = 10ms).
-	  Try 0-3 for low latency applications.  Approx 5 for high load
-	  applications (e.g. PPP).  Maybe this should be more adaptive some
-	  day...
-
-config ETRAX_SERIAL_PORT0
-	bool "Serial port 0 enabled"
-	depends on ETRAX_SERIAL
-	help
-	  Enables the ETRAX 100 serial driver for ser0 (ttyS0)
-	  Normally you want this on, unless you use external DMA 1 that uses
-	  the same DMA channels.
-
-choice
-	prompt "Ser0 DTR, RI, DSR and CD assignment"
-	depends on ETRAX_SERIAL_PORT0
-	default ETRAX_SER0_DTR_RI_DSR_CD_ON_NONE
-
-config ETRAX_SER0_DTR_RI_DSR_CD_ON_NONE
-	bool "No_DTR_RI_DSR_CD"
-
-config ETRAX_SER0_DTR_RI_DSR_CD_ON_PA
-	bool "DTR_RI_DSR_CD_on_PA"
-
-config ETRAX_SER0_DTR_RI_DSR_CD_ON_PB
-	bool "DTR_RI_DSR_CD_on_PB"
-	help
-	  Enables the status and control signals DTR, RI, DSR and CD on PB for
-	  ser0.
-
-config ETRAX_SER0_DTR_RI_DSR_CD_MIXED
-	bool "DTR_RI_DSR_CD_mixed_on_PA_and_PB"
-
-endchoice
-
-config ETRAX_SER0_DTR_ON_PA_BIT
-	int "Ser0 DTR on PA bit (-1 = not used)" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PA || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
-	depends on ETRAX_SERIAL_PORT0
-	default "-1" if !ETRAX_SER0_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER0_DTR_RI_DSR_CD_MIXED
-	default "4" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PA || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
-
-config ETRAX_SER0_RI_ON_PA_BIT
-	int "Ser0 RI  on PA bit (-1 = not used)" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PA || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
-	depends on ETRAX_SERIAL_PORT0
-	default "-1" if !ETRAX_SER0_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER0_DTR_RI_DSR_CD_MIXED
-	default "5" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PA || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
-
-config ETRAX_SER0_DSR_ON_PA_BIT
-	int "Ser0 DSR on PA bit (-1 = not used)" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PA || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
-	depends on ETRAX_SERIAL_PORT0
-	default "-1" if !ETRAX_SER0_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER0_DTR_RI_DSR_CD_MIXED
-	default "6" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PA || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
-
-config ETRAX_SER0_CD_ON_PA_BIT
-	int "Ser0 CD  on PA bit (-1 = not used)" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PA || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
-	depends on ETRAX_SERIAL_PORT0
-	default "-1" if !ETRAX_SER0_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER0_DTR_RI_DSR_CD_MIXED
-	default "7" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PA || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
-
-config ETRAX_SER0_DTR_ON_PB_BIT
-	int "Ser0 DTR on PB bit (-1 = not used)" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PB || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
-	depends on ETRAX_SERIAL_PORT0
-	default "-1" if !ETRAX_SER0_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER0_DTR_RI_DSR_CD_MIXED
-	default "4" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PB || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
-	help
-	  Specify the pin of the PB port to carry the DTR signal for serial
-	  port 0.
-
-config ETRAX_SER0_RI_ON_PB_BIT
-	int "Ser0 RI  on PB bit (-1 = not used)" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PB || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
-	depends on ETRAX_SERIAL_PORT0
-	default "-1" if !ETRAX_SER0_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER0_DTR_RI_DSR_CD_MIXED
-	default "5" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PB || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
-	help
-	  Specify the pin of the PB port to carry the RI signal for serial
-	  port 0.
-
-config ETRAX_SER0_DSR_ON_PB_BIT
-	int "Ser0 DSR on PB bit (-1 = not used)" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PB || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
-	depends on ETRAX_SERIAL_PORT0
-	default "-1" if !ETRAX_SER0_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER0_DTR_RI_DSR_CD_MIXED
-	default "6" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PB || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
-	help
-	  Specify the pin of the PB port to carry the DSR signal for serial
-	  port 0.
-
-config ETRAX_SER0_CD_ON_PB_BIT
-	int "Ser0 CD  on PB bit (-1 = not used)" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PB || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
-	depends on ETRAX_SERIAL_PORT0
-	default "-1" if !ETRAX_SER0_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER0_DTR_RI_DSR_CD_MIXED
-	default "7" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PB || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
-	help
-	  Specify the pin of the PB port to carry the CD signal for serial
-	  port 0.
-
-config ETRAX_SERIAL_PORT1
-	bool "Serial port 1 enabled"
-	depends on ETRAX_SERIAL
-	help
-	  Enables the ETRAX 100 serial driver for ser1 (ttyS1).
-
-choice
-	prompt "Ser1 DTR, RI, DSR and CD assignment"
-	depends on ETRAX_SERIAL_PORT1
-	default ETRAX_SER1_DTR_RI_DSR_CD_ON_NONE
-
-config ETRAX_SER1_DTR_RI_DSR_CD_ON_NONE
-	bool "No_DTR_RI_DSR_CD"
-
-config ETRAX_SER1_DTR_RI_DSR_CD_ON_PA
-	bool "DTR_RI_DSR_CD_on_PA"
-
-config ETRAX_SER1_DTR_RI_DSR_CD_ON_PB
-	bool "DTR_RI_DSR_CD_on_PB"
-	help
-	  Enables the status and control signals DTR, RI, DSR and CD on PB for
-	  ser1.
-
-config ETRAX_SER1_DTR_RI_DSR_CD_MIXED
-	bool "DTR_RI_DSR_CD_mixed_on_PA_and_PB"
-
-endchoice
-
-config ETRAX_SER1_DTR_ON_PA_BIT
-	int "Ser1 DTR on PA bit (-1 = not used)" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PA || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
-	depends on ETRAX_SERIAL_PORT1
-	default "-1" if !ETRAX_SER1_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER1_DTR_RI_DSR_CD_MIXED
-	default "4" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PA || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
-
-config ETRAX_SER1_RI_ON_PA_BIT
-	int "Ser1 RI  on PA bit (-1 = not used)" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PA || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
-	depends on ETRAX_SERIAL_PORT1
-	default "-1" if !ETRAX_SER1_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER1_DTR_RI_DSR_CD_MIXED
-	default "5" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PA || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
-
-config ETRAX_SER1_DSR_ON_PA_BIT
-	int "Ser1 DSR on PA bit (-1 = not used)" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PA || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
-	depends on ETRAX_SERIAL_PORT1
-	default "-1" if !ETRAX_SER1_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER1_DTR_RI_DSR_CD_MIXED
-	default "6" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PA || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
-
-config ETRAX_SER1_CD_ON_PA_BIT
-	int "Ser1 CD  on PA bit (-1 = not used)" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PA || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
-	depends on ETRAX_SERIAL_PORT1
-	default "-1" if !ETRAX_SER1_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER1_DTR_RI_DSR_CD_MIXED
-	default "7" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PA || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
-
-config ETRAX_SER1_DTR_ON_PB_BIT
-	int "Ser1 DTR on PB bit (-1 = not used)" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PB || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
-	depends on ETRAX_SERIAL_PORT1
-	default "-1" if !ETRAX_SER1_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER1_DTR_RI_DSR_CD_MIXED
-	default "4" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PB || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
-	help
-	  Specify the pin of the PB port to carry the DTR signal for serial
-	  port 1.
-
-config ETRAX_SER1_RI_ON_PB_BIT
-	int "Ser1 RI  on PB bit (-1 = not used)" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PB || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
-	depends on ETRAX_SERIAL_PORT1
-	default "-1" if !ETRAX_SER1_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER1_DTR_RI_DSR_CD_MIXED
-	default "5" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PB || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
-	help
-	  Specify the pin of the PB port to carry the RI signal for serial
-	  port 1.
-
-config ETRAX_SER1_DSR_ON_PB_BIT
-	int "Ser1 DSR on PB bit (-1 = not used)" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PB || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
-	depends on ETRAX_SERIAL_PORT1
-	default "-1" if !ETRAX_SER1_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER1_DTR_RI_DSR_CD_MIXED
-	default "6" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PB || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
-	help
-	  Specify the pin of the PB port to carry the DSR signal for serial
-	  port 1.
-
-config ETRAX_SER1_CD_ON_PB_BIT
-	int "Ser1 CD  on PB bit (-1 = not used)" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PB || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
-	depends on ETRAX_SERIAL_PORT1
-	default "-1" if !ETRAX_SER1_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER1_DTR_RI_DSR_CD_MIXED
-	default "7" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PB || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
-	help
-	  Specify the pin of the PB port to carry the CD signal for serial
-	  port 1.
-
-comment "Make sure you do not have the same PB bits more than once!"
-	depends on ETRAX_SERIAL && ETRAX_SER0_DTR_RI_DSR_CD_ON_PB && ETRAX_SER1_DTR_RI_DSR_CD_ON_PB
-
-config ETRAX_SERIAL_PORT2
-	bool "Serial port 2 enabled"
-	depends on ETRAX_SERIAL
-	help
-	  Enables the ETRAX 100 serial driver for ser2 (ttyS2).
-
-choice
-	prompt "Ser2 DTR, RI, DSR and CD assignment"
-	depends on ETRAX_SERIAL_PORT2
-	default ETRAX_SER2_DTR_RI_DSR_CD_ON_NONE
-
-config ETRAX_SER2_DTR_RI_DSR_CD_ON_NONE
-	bool "No_DTR_RI_DSR_CD"
-
-config ETRAX_SER2_DTR_RI_DSR_CD_ON_PA
-	bool "DTR_RI_DSR_CD_on_PA"
-	help
-	  Enables the status and control signals DTR, RI, DSR and CD on PA for
-	  ser2.
-
-config ETRAX_SER2_DTR_RI_DSR_CD_ON_PB
-	bool "DTR_RI_DSR_CD_on_PB"
-
-config ETRAX_SER2_DTR_RI_DSR_CD_MIXED
-	bool "DTR_RI_DSR_CD_mixed_on_PA_and_PB"
-
-endchoice
-
-config ETRAX_SER2_DTR_ON_PA_BIT
-	int "Ser2 DTR on PA bit (-1 = not used)" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PA || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
-	depends on ETRAX_SERIAL_PORT2
-	default "-1" if !ETRAX_SER2_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER2_DTR_RI_DSR_CD_MIXED
-	default "4" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PA || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
-	help
-	  Specify the pin of the PA port to carry the DTR signal for serial
-	  port 2.
-
-config ETRAX_SER2_RI_ON_PA_BIT
-	int "Ser2 RI  on PA bit (-1 = not used)" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PA || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
-	depends on ETRAX_SERIAL_PORT2
-	default "-1" if !ETRAX_SER2_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER2_DTR_RI_DSR_CD_MIXED
-	default "5" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PA || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
-	help
-	  Specify the pin of the PA port to carry the RI signal for serial
-	  port 2.
-
-config ETRAX_SER2_DSR_ON_PA_BIT
-	int "Ser2 DSR on PA bit (-1 = not used)" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PA || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
-	depends on ETRAX_SERIAL_PORT2
-	default "-1" if !ETRAX_SER2_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER2_DTR_RI_DSR_CD_MIXED
-	default "6" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PA || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
-	help
-	  Specify the pin of the PA port to carry the DTR signal for serial
-	  port 2.
-
-config ETRAX_SER2_CD_ON_PA_BIT
-	int "Ser2 CD  on PA bit (-1 = not used)" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PA || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
-	depends on ETRAX_SERIAL_PORT2
-	default "-1" if !ETRAX_SER2_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER2_DTR_RI_DSR_CD_MIXED
-	default "7" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PA || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
-	help
-	  Specify the pin of the PA port to carry the CD signal for serial
-	  port 2.
-
-config ETRAX_SER2_DTR_ON_PB_BIT
-	int "Ser2 DTR on PB bit (-1 = not used)" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PB || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
-	depends on ETRAX_SERIAL_PORT2
-	default "-1" if !ETRAX_SER2_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER2_DTR_RI_DSR_CD_MIXED
-	default "4" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PB || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
-
-config ETRAX_SER2_RI_ON_PB_BIT
-	int "Ser2 RI  on PB bit (-1 = not used)" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PB || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
-	depends on ETRAX_SERIAL_PORT2
-	default "-1" if !ETRAX_SER2_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER2_DTR_RI_DSR_CD_MIXED
-	default "5" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PB || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
-
-config ETRAX_SER2_DSR_ON_PB_BIT
-	int "Ser2 DSR on PB bit (-1 = not used)" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PB || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
-	depends on ETRAX_SERIAL_PORT2
-	default "-1" if !ETRAX_SER2_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER2_DTR_RI_DSR_CD_MIXED
-	default "6" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PB || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
-
-config ETRAX_SER2_CD_ON_PB_BIT
-	int "Ser2 CD  on PB bit (-1 = not used)" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PB || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
-	depends on ETRAX_SERIAL_PORT2
-	default "-1" if !ETRAX_SER2_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER2_DTR_RI_DSR_CD_MIXED
-	default "7" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PB || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
-
-config ETRAX_SERIAL_PORT3
-	bool "Serial port 3 enabled"
-	depends on ETRAX_SERIAL
-	help
-	  Enables the ETRAX 100 serial driver for ser3 (ttyS3).
-
-choice
-	prompt "Ser3 DTR, RI, DSR and CD assignment"
-	depends on ETRAX_SERIAL_PORT3
-	default ETRAX_SER3_DTR_RI_DSR_CD_ON_NONE
-
-config ETRAX_SER3_DTR_RI_DSR_CD_ON_NONE
-	bool "No_DTR_RI_DSR_CD"
-
-config ETRAX_SER3_DTR_RI_DSR_CD_ON_PA
-	bool "DTR_RI_DSR_CD_on_PA"
-
-config ETRAX_SER3_DTR_RI_DSR_CD_ON_PB
-	bool "DTR_RI_DSR_CD_on_PB"
-
-config ETRAX_SER3_DTR_RI_DSR_CD_MIXED
-	bool "DTR_RI_DSR_CD_mixed_on_PA_and_PB"
-
-endchoice
-
-config ETRAX_SER3_DTR_ON_PA_BIT
-	int "Ser3 DTR on PA bit (-1 = not used)" if ETRAX_SER3_DTR_RI_DSR_CD_ON_PA || ETRAX_SER3_DTR_RI_DSR_CD_MIXED
-	depends on ETRAX_SERIAL_PORT3
-	default "-1"
-
-config ETRAX_SER3_RI_ON_PA_BIT
-	int "Ser3 RI  on PA bit (-1 = not used)" if ETRAX_SER3_DTR_RI_DSR_CD_ON_PA || ETRAX_SER3_DTR_RI_DSR_CD_MIXED
-	depends on ETRAX_SERIAL_PORT3
-	default "-1"
-
-config ETRAX_SER3_DSR_ON_PA_BIT
-	int "Ser3 DSR on PA bit (-1 = not used)" if ETRAX_SER3_DTR_RI_DSR_CD_ON_PA || ETRAX_SER3_DTR_RI_DSR_CD_MIXED
-	depends on ETRAX_SERIAL_PORT3
-	default "-1"
-
-config ETRAX_SER3_CD_ON_PA_BIT
-	int "Ser3 CD  on PA bit (-1 = not used)" if ETRAX_SER3_DTR_RI_DSR_CD_ON_PA || ETRAX_SER3_DTR_RI_DSR_CD_MIXED
-	depends on ETRAX_SERIAL_PORT3
-	default "-1"
-
-config ETRAX_SER3_DTR_ON_PB_BIT
-	int "Ser3 DTR on PB bit (-1 = not used)" if ETRAX_SER3_DTR_RI_DSR_CD_ON_PB || ETRAX_SER3_DTR_RI_DSR_CD_MIXED
-	depends on ETRAX_SERIAL_PORT3
-	default "-1"
-
-config ETRAX_SER3_RI_ON_PB_BIT
-	int "Ser3 RI  on PB bit (-1 = not used)" if ETRAX_SER3_DTR_RI_DSR_CD_ON_PB || ETRAX_SER3_DTR_RI_DSR_CD_MIXED
-	depends on ETRAX_SERIAL_PORT3
-	default "-1"
-
-config ETRAX_SER3_DSR_ON_PB_BIT
-	int "Ser3 DSR on PB bit (-1 = not used)" if ETRAX_SER3_DTR_RI_DSR_CD_ON_PB || ETRAX_SER3_DTR_RI_DSR_CD_MIXED
-	depends on ETRAX_SERIAL_PORT3
-	default "-1"
-
-config ETRAX_SER3_CD_ON_PB_BIT
-	int "Ser3 CD  on PB bit (-1 = not used)" if ETRAX_SER3_DTR_RI_DSR_CD_ON_PB || ETRAX_SER3_DTR_RI_DSR_CD_MIXED
-	depends on ETRAX_SERIAL_PORT3
-	default "-1"
-
-config ETRAX_RS485
-	bool "RS-485 support"
-	depends on ETRAX_SERIAL
-	help
-	  Enables support for RS-485 serial communication.  For a primer on
-	  RS-485, see <http://en.wikipedia.org/wiki/Rs485>
-
-config ETRAX_RS485_ON_PA
-	bool "RS-485 mode on PA"
-	depends on ETRAX_RS485
-	help
-	  Control Driver Output Enable on RS485 transceiver using a pin on PA
-	  port:
-	  Axis 2400/2401 uses PA 3.
-
-config ETRAX_RS485_ON_PA_BIT
-	int "RS-485 mode on PA bit"
-	depends on ETRAX_RS485_ON_PA
-	default "3"
-	help
-	  Control Driver Output Enable on RS485 transceiver using a this bit
-	  on PA port.
-
-config ETRAX_RS485_DISABLE_RECEIVER
-	bool "Disable serial receiver"
-	depends on ETRAX_RS485
-	help
-	  It's necessary to disable the serial receiver to avoid serial
-	  loopback.  Not all products are able to do this in software only.
-	  Axis 2400/2401 must disable receiver.
-
-config ETRAX_USB_HOST
-	bool "USB host"
-	select USB
-	help
-	   This option enables the host functionality of the ETRAX 100LX
-	   built-in USB controller. In host mode the controller is designed
-	   for CTRL and BULK traffic only, INTR traffic may work as well
-	   however (depending on the requirements of timeliness).
-
-config ETRAX_PTABLE_SECTOR
-	int "Byte-offset of partition table sector"
-	depends on ETRAX_AXISFLASHMAP
-	default "65536"
-	help
-	  Byte-offset of the partition table in the first flash chip.
-	  The default value is 64kB and should not be changed unless
-	  you know exactly what you are doing. The only valid reason
-	  for changing this is when the flash block size is bigger
-	  than 64kB (e.g. when using two parallel 16 bit flashes).
-
-config ETRAX_I2C
-	bool "I2C support"
-	depends on ETRAX_ARCH_V10
-	help
-	  Enables an I2C driver on ETRAX100.
-	  EXAMPLE usage:
-	  i2c_arg = I2C_WRITEARG(STA013_WRITE_ADDR, reg, val);
-	  ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_WRITEREG), i2c_arg);
-	  i2c_arg = I2C_READARG(STA013_READ_ADDR, reg);
-	  val = ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_READREG), i2c_arg);
-
-# this is true for most products since PB-I2C seems to be somewhat
-# flawed..
-config ETRAX_I2C_USES_PB_NOT_PB_I2C
-	bool "I2C uses PB not PB-I2C"
-	depends on ETRAX_I2C
-	help
-	  Select whether to use the special I2C mode in the PB I/O register or
-	  not.  This option needs to be selected in order to use some drivers
-	  that access the I2C I/O pins directly instead of going through the
-	  I2C driver, like the DS1302 realtime-clock driver.  If you are
-	  uncertain, choose Y here.
-
-config ETRAX_I2C_DATA_PORT
-	int "I2C SDA bit number"
-	depends on ETRAX_I2C_USES_PB_NOT_PB_I2C
-	default "0"
-	help
-	  Selects the pin on Port B where the data pin is connected
-
-config ETRAX_I2C_CLK_PORT
-	int "I2C SCL bit number"
-	depends on ETRAX_I2C_USES_PB_NOT_PB_I2C
-	default "1"
-	help
-	  Select the pin on Port B where the clock pin is connected
-
-config ETRAX_I2C_EEPROM
-	bool "I2C EEPROM (non-volatile RAM) support"
-	depends on ETRAX_I2C
-	help
-	  Enables I2C EEPROM (non-volatile RAM) on PB0 and PB1 using the I2C
-	  driver.  Select size option: Probed, 2k, 8k, 16k.
-	  (Probing works for 2k and 8k but not that well for 16k)
-
-choice
-	prompt "EEPROM size"
-	depends on ETRAX_I2C_EEPROM
-	default ETRAX_I2C_EEPROM_PROBE
-
-config ETRAX_I2C_EEPROM_PROBE
-	bool "Probed"
-	help
-	  Specifies size or auto probe of the EEPROM size.
-	  Options: Probed, 2k, 8k, 16k.
-	  (Probing works for 2k and 8k but not that well for 16k)
-
-config ETRAX_I2C_EEPROM_2KB
-	bool "2kB"
-	help
-	  Use a 2kB EEPROM.
-
-config ETRAX_I2C_EEPROM_8KB
-	bool "8kB"
-	help
-	  Use a 8kB EEPROM.
-
-config ETRAX_I2C_EEPROM_16KB
-	bool "16kB"
-	help
-	  Use a 16kB EEPROM.
-
-endchoice
-
-config ETRAX_GPIO
-	bool "GPIO support"
-	depends on ETRAX_ARCH_V10
-	---help---
-	  Enables the ETRAX general port device (major 120, minors 0 and 1).
-	  You can use this driver to access the general port bits. It supports
-	  these ioctl's:
-	  #include <linux/etraxgpio.h>
-	  fd = open("/dev/gpioa", O_RDWR); // or /dev/gpiob
-	  ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_SETBITS), bits_to_set);
-	  ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_CLRBITS), bits_to_clear);
-	  val = ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_READBITS), NULL);
-	  Remember that you need to setup the port directions appropriately in
-	  the General configuration.
-
-config ETRAX_PA_CHANGEABLE_DIR
-	hex "PA user changeable dir mask"
-	depends on ETRAX_GPIO
-	default "00"
-	help
-	  This is a bitmask with information of what bits in PA that a user
-	  can change direction on using ioctl's.
-	  Bit set = changeable.
-	  You probably want 00 here.
-
-config ETRAX_PA_CHANGEABLE_BITS
-	hex "PA user changeable bits mask"
-	depends on ETRAX_GPIO
-	default "FF"
-	help
-	  This is a bitmask with information of what bits in PA that a user
-	  can change the value on using ioctl's.
-	  Bit set = changeable.
-	  You probably want 00 here.
-
-config ETRAX_PB_CHANGEABLE_DIR
-	hex "PB user changeable dir mask"
-	depends on ETRAX_GPIO
-	default "00"
-	help
-	  This is a bitmask with information of what bits in PB that a user
-	  can change direction on using ioctl's.
-	  Bit set = changeable.
-	  You probably want 00 here.
-
-config ETRAX_PB_CHANGEABLE_BITS
-	hex "PB user changeable bits mask"
-	depends on ETRAX_GPIO
-	default "FF"
-	help
-	  This is a bitmask with information of what bits in PB that a user
-	  can change the value on using ioctl's.
-	  Bit set = changeable.
-	  You probably want 00 here.
-
-endif