Blackfin: unify duplicated power masks

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

1 files changed, 0 insertions, 66 deletions

diff --git a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
index 855bc608c8e7..6d97b4e892b4 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
@@ -2075,26 +2075,6 @@
 #define                    AFEXIT  0x10       /* Authentication Firmware Exit */
 #define                   SECSTAT  0xe0       /* Secure Status */
 
-/* Bit masks for PLL_DIV */
-
-#define                      CSEL  0x30       /* Core Select */
-#define                      SSEL  0xf        /* System Select */
-#define			CSEL_DIV1	0x0000	/* CCLK = VCO / 1 */
-#define			CSEL_DIV2	0x0010	/* CCLK = VCO / 2 */
-#define			CSEL_DIV4	0x0020	/* CCLK = VCO / 4 */
-#define			CSEL_DIV8	0x0030	/* CCLK = VCO / 8 */
-
-/* Bit masks for PLL_CTL */
-
-#define                      MSEL  0x7e00     /* Multiplier Select */
-#define                    BYPASS  0x100      /* PLL Bypass Enable */
-#define              OUTPUT_DELAY  0x80       /* External Memory Output Delay Enable */
-#define               INPUT_DELAY  0x40       /* External Memory Input Delay Enable */
-#define                      PDWN  0x20       /* Power Down */
-#define                    STOPCK  0x8        /* Stop Clock */
-#define                   PLL_OFF  0x2        /* Disable PLL */
-#define                        DF  0x1        /* Divide Frequency */
-
 /* SWRST Masks */
 #define              SYSTEM_RESET 0x0007       /* Initiates A System Software Reset */
 #define              DOUBLE_FAULT 0x0008       /* Core Double Fault Causes Reset */
@@ -2102,52 +2082,6 @@
 #define                RESET_WDOG 0x4000       /* SW Reset Generated By Watchdog Timer */
 #define            RESET_SOFTWARE 0x8000       /* SW Reset Occurred Since Last Read Of SWRST */
 
-/* Bit masks for PLL_STAT */
-
-#define                PLL_LOCKED  0x20       /* PLL Locked Status */
-#define        ACTIVE_PLLDISABLED  0x4        /* Active Mode With PLL Disabled */
-#define                   FULL_ON  0x2        /* Full-On Mode */
-#define         ACTIVE_PLLENABLED  0x1        /* Active Mode With PLL Enabled */
-#define                     RTCWS  0x400      /* RTC/Reset Wake-Up Status */
-#define                     CANWS  0x800      /* CAN Wake-Up Status */
-#define                     USBWS  0x2000     /* USB Wake-Up Status */
-#define                    KPADWS  0x4000     /* Keypad Wake-Up Status */
-#define                     ROTWS  0x8000     /* Rotary Wake-Up Status */
-#define                      GPWS  0x1000     /* General-Purpose Wake-Up Status */
-
-/* Bit masks for VR_CTL */
-
-#define                      FREQ  0x3        /* Regulator Switching Frequency */
-#define                      GAIN  0xc        /* Voltage Output Level Gain */
-#define                      VLEV  0xf0       /* Internal Voltage Level */
-#define                   SCKELOW  0x8000     /* Drive SCKE Low During Reset Enable */
-#define                      WAKE  0x100      /* RTC/Reset Wake-Up Enable */
-#define                     CANWE  0x200      /* CAN0/1 Wake-Up Enable */
-#define                      GPWE  0x400      /* General-Purpose Wake-Up Enable */
-#define                     USBWE  0x800      /* USB Wake-Up Enable */
-#define                    KPADWE  0x1000     /* Keypad Wake-Up Enable */
-#define                     ROTWE  0x2000     /* Rotary Wake-Up Enable */
-
-#define	FREQ_333		0x0001	/* Switching Frequency Is 333 kHz */
-#define	FREQ_667		0x0002	/* Switching Frequency Is 667 kHz */
-#define	FREQ_1000		0x0003	/* Switching Frequency Is 1 MHz */
-
-#define	GAIN_5			0x0000	/* GAIN = 5*/
-#define	GAIN_10			0x0004	/* GAIN = 1*/
-#define	GAIN_20			0x0008	/* GAIN = 2*/
-#define	GAIN_50			0x000C	/* GAIN = 5*/
-
-#define	VLEV_085 		0x0060	/* VLEV = 0.85 V (-5% - +10% Accuracy) */
-#define	VLEV_090		0x0070	/* VLEV = 0.90 V (-5% - +10% Accuracy) */
-#define	VLEV_095		0x0080	/* VLEV = 0.95 V (-5% - +10% Accuracy) */
-#define	VLEV_100		0x0090	/* VLEV = 1.00 V (-5% - +10% Accuracy) */
-#define	VLEV_105		0x00A0	/* VLEV = 1.05 V (-5% - +10% Accuracy) */
-#define	VLEV_110		0x00B0	/* VLEV = 1.10 V (-5% - +10% Accuracy) */
-#define	VLEV_115		0x00C0	/* VLEV = 1.15 V (-5% - +10% Accuracy) */
-#define	VLEV_120		0x00D0	/* VLEV = 1.20 V (-5% - +10% Accuracy) */
-#define	VLEV_125		0x00E0	/* VLEV = 1.25 V (-5% - +10% Accuracy) */
-#define	VLEV_130		0x00F0	/* VLEV = 1.30 V (-5% - +10% Accuracy) */
-
 /* Bit masks for NFC_CTL */
 
 #define                    WR_DLY  0xf        /* Write Strobe Delay */