Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (32 commits)
  Blackfin: gpio: add a debounce stub
  Blackfin: update defconfigs
  Blackfin: remove CONFIG_MEM_GENERIC_BOARD
  Blackfin: dpmc: punt unnecessary RTC_ISTAT clearing
  Blackfin: unify rotary encoder bitmasks
  Blackfin: unify SDH/RSI bitmasks
  Blackfin: BF54x: tweak DMAC MMR naming to match other ports
  Blackfin: TWI: clean up the MMR names
  Blackfin: add EVT_OVERRIDE/IPRIO core MMR helpers
  Blackfin: add support for dynamic ftrace
  Blackfin: add support for LZO compressed kernels
  Blackfin: portmux: fix peripheral map overflow when requesting pins
  Blackfin: document SPI CS limitations with CPHA=0
  Blackfin: remove useless and outdated documentation
  Blackfin: BF51x/BF52x: support GPIO Hysteresis/Schmitt Trigger options
  Blackfin: gpio/portmux: clean up whitespace corruption
  Blackfin: make sure mmiowb inserts a write barrier with SSYNC
  Blackfin: fix DMA/cache bug when resuming from suspend to RAM
  Blackfin: BF51x: fix handling of PH8 (the "internal" SPI0SEL4 pin)
  Blackfin: add a GPIO_DEFAULT_BOOT_SPI_CS
  ...

12 files changed, 301 insertions, 85 deletions

diff --git a/arch/blackfin/include/asm/bfin_rotary.h b/arch/blackfin/include/asm/bfin_rotary.h
index abdb2af52902..0b6910bdc57f 100644
--- a/arch/blackfin/include/asm/bfin_rotary.h
+++ b/arch/blackfin/include/asm/bfin_rotary.h
@@ -2,7 +2,7 @@
  * board initialization should put one of these structures into platform_data
  * and place the bfin-rotary onto platform_bus named "bfin-rotary".
  *
- * Copyright 2008 Analog Devices Inc.
+ * Copyright 2008-2010 Analog Devices Inc.
  *
  * Licensed under the GPL-2 or later.
  */
@@ -40,4 +40,76 @@ struct bfin_rotary_platform_data {
 	unsigned short debounce;	/* 0..17 */
 	unsigned short mode;
 };
+
+/* CNT_CONFIG bitmasks */
+#define CNTE		(1 << 0)	/* Counter Enable */
+#define DEBE		(1 << 1)	/* Debounce Enable */
+#define CDGINV		(1 << 4)	/* CDG Pin Polarity Invert */
+#define CUDINV		(1 << 5)	/* CUD Pin Polarity Invert */
+#define CZMINV		(1 << 6)	/* CZM Pin Polarity Invert */
+#define CNTMODE_SHIFT	8
+#define CNTMODE		(0x7 << CNTMODE_SHIFT)	/* Counter Operating Mode */
+#define ZMZC		(1 << 1)	/* CZM Zeroes Counter Enable */
+#define BNDMODE_SHIFT	12
+#define BNDMODE		(0x3 << BNDMODE_SHIFT)	/* Boundary register Mode */
+#define INPDIS		(1 << 15)	/* CUG and CDG Input Disable */
+
+#define CNTMODE_QUADENC	(0 << CNTMODE_SHIFT)	/* quadrature encoder mode */
+#define CNTMODE_BINENC	(1 << CNTMODE_SHIFT)	/* binary encoder mode */
+#define CNTMODE_UDCNT	(2 << CNTMODE_SHIFT)	/* up/down counter mode */
+#define CNTMODE_DIRCNT	(4 << CNTMODE_SHIFT)	/* direction counter mode */
+#define CNTMODE_DIRTMR	(5 << CNTMODE_SHIFT)	/* direction timer mode */
+
+#define BNDMODE_COMP	(0 << BNDMODE_SHIFT)	/* boundary compare mode */
+#define BNDMODE_ZERO	(1 << BNDMODE_SHIFT)	/* boundary compare and zero mode */
+#define BNDMODE_CAPT	(2 << BNDMODE_SHIFT)	/* boundary capture mode */
+#define BNDMODE_AEXT	(3 << BNDMODE_SHIFT)	/* boundary auto-extend mode */
+
+/* CNT_IMASK bitmasks */
+#define ICIE		(1 << 0)	/* Illegal Gray/Binary Code Interrupt Enable */
+#define UCIE		(1 << 1)	/* Up count Interrupt Enable */
+#define DCIE		(1 << 2)	/* Down count Interrupt Enable */
+#define MINCIE		(1 << 3)	/* Min Count Interrupt Enable */
+#define MAXCIE		(1 << 4)	/* Max Count Interrupt Enable */
+#define COV31IE		(1 << 5)	/* Bit 31 Overflow Interrupt Enable */
+#define COV15IE		(1 << 6)	/* Bit 15 Overflow Interrupt Enable */
+#define CZEROIE		(1 << 7)	/* Count to Zero Interrupt Enable */
+#define CZMIE		(1 << 8)	/* CZM Pin Interrupt Enable */
+#define CZMEIE		(1 << 9)	/* CZM Error Interrupt Enable */
+#define CZMZIE		(1 << 10)	/* CZM Zeroes Counter Interrupt Enable */
+
+/* CNT_STATUS bitmasks */
+#define ICII		(1 << 0)	/* Illegal Gray/Binary Code Interrupt Identifier */
+#define UCII		(1 << 1)	/* Up count Interrupt Identifier */
+#define DCII		(1 << 2)	/* Down count Interrupt Identifier */
+#define MINCII		(1 << 3)	/* Min Count Interrupt Identifier */
+#define MAXCII		(1 << 4)	/* Max Count Interrupt Identifier */
+#define COV31II		(1 << 5)	/* Bit 31 Overflow Interrupt Identifier */
+#define COV15II		(1 << 6)	/* Bit 15 Overflow Interrupt Identifier */
+#define CZEROII		(1 << 7)	/* Count to Zero Interrupt Identifier */
+#define CZMII		(1 << 8)	/* CZM Pin Interrupt Identifier */
+#define CZMEII		(1 << 9)	/* CZM Error Interrupt Identifier */
+#define CZMZII		(1 << 10)	/* CZM Zeroes Counter Interrupt Identifier */
+
+/* CNT_COMMAND bitmasks */
+#define W1LCNT		0xf		/* Load Counter Register */
+#define W1LMIN		0xf0		/* Load Min Register */
+#define W1LMAX		0xf00		/* Load Max Register */
+#define W1ZMONCE	(1 << 12)	/* Enable CZM Clear Counter Once */
+
+#define W1LCNT_ZERO	(1 << 0)	/* write 1 to load CNT_COUNTER with zero */
+#define W1LCNT_MIN	(1 << 2)	/* write 1 to load CNT_COUNTER from CNT_MIN */
+#define W1LCNT_MAX	(1 << 3)	/* write 1 to load CNT_COUNTER from CNT_MAX */
+
+#define W1LMIN_ZERO	(1 << 4)	/* write 1 to load CNT_MIN with zero */
+#define W1LMIN_CNT	(1 << 5)	/* write 1 to load CNT_MIN from CNT_COUNTER */
+#define W1LMIN_MAX	(1 << 7)	/* write 1 to load CNT_MIN from CNT_MAX */
+
+#define W1LMAX_ZERO	(1 << 8)	/* write 1 to load CNT_MAX with zero */
+#define W1LMAX_CNT	(1 << 9)	/* write 1 to load CNT_MAX from CNT_COUNTER */
+#define W1LMAX_MIN	(1 << 10)	/* write 1 to load CNT_MAX from CNT_MIN */
+
+/* CNT_DEBOUNCE bitmasks */
+#define DPRESCALE	0xf		/* Load Counter Register */
+
 #endif
diff --git a/arch/blackfin/include/asm/bfin_sdh.h b/arch/blackfin/include/asm/bfin_sdh.h
index d61d5497c590..6a4cfe2d3367 100644
--- a/arch/blackfin/include/asm/bfin_sdh.h
+++ b/arch/blackfin/include/asm/bfin_sdh.h
@@ -1,7 +1,7 @@
 /*
- * bfin_sdh.h - Blackfin SDH definitions
+ * Blackfin Secure Digital Host (SDH) definitions
  *
- * Copyright 2008 Analog Devices Inc.
+ * Copyright 2008-2010 Analog Devices Inc.
  *
  * Licensed under the GPL-2 or later.
  */
@@ -9,6 +9,7 @@
 #ifndef __BFIN_SDH_H__
 #define __BFIN_SDH_H__
 
+/* Platform resources */
 struct bfin_sd_host {
 	int dma_chan;
 	int irq_int0;
@@ -16,4 +17,118 @@ struct bfin_sd_host {
 	u16 pin_req[7];
 };
 
+/* SDH_COMMAND bitmasks */
+#define CMD_IDX            0x3f        /* Command Index */
+#define CMD_RSP            (1 << 6)    /* Response */
+#define CMD_L_RSP          (1 << 7)    /* Long Response */
+#define CMD_INT_E          (1 << 8)    /* Command Interrupt */
+#define CMD_PEND_E         (1 << 9)    /* Command Pending */
+#define CMD_E              (1 << 10)   /* Command Enable */
+
+/* SDH_PWR_CTL bitmasks */
+#define PWR_ON             0x3         /* Power On */
+#define SD_CMD_OD          (1 << 6)    /* Open Drain Output */
+#define ROD_CTL            (1 << 7)    /* Rod Control */
+
+/* SDH_CLK_CTL bitmasks */
+#define CLKDIV             0xff        /* MC_CLK Divisor */
+#define CLK_E              (1 << 8)    /* MC_CLK Bus Clock Enable */
+#define PWR_SV_E           (1 << 9)    /* Power Save Enable */
+#define CLKDIV_BYPASS      (1 << 10)   /* Bypass Divisor */
+#define WIDE_BUS           (1 << 11)   /* Wide Bus Mode Enable */
+
+/* SDH_RESP_CMD bitmasks */
+#define RESP_CMD           0x3f        /* Response Command */
+
+/* SDH_DATA_CTL bitmasks */
+#define DTX_E              (1 << 0)    /* Data Transfer Enable */
+#define DTX_DIR            (1 << 1)    /* Data Transfer Direction */
+#define DTX_MODE           (1 << 2)    /* Data Transfer Mode */
+#define DTX_DMA_E          (1 << 3)    /* Data Transfer DMA Enable */
+#define DTX_BLK_LGTH       (0xf << 4)  /* Data Transfer Block Length */
+
+/* SDH_STATUS bitmasks */
+#define CMD_CRC_FAIL       (1 << 0)    /* CMD CRC Fail */
+#define DAT_CRC_FAIL       (1 << 1)    /* Data CRC Fail */
+#define CMD_TIME_OUT       (1 << 2)    /* CMD Time Out */
+#define DAT_TIME_OUT       (1 << 3)    /* Data Time Out */
+#define TX_UNDERRUN        (1 << 4)    /* Transmit Underrun */
+#define RX_OVERRUN         (1 << 5)    /* Receive Overrun */
+#define CMD_RESP_END       (1 << 6)    /* CMD Response End */
+#define CMD_SENT           (1 << 7)    /* CMD Sent */
+#define DAT_END            (1 << 8)    /* Data End */
+#define START_BIT_ERR      (1 << 9)    /* Start Bit Error */
+#define DAT_BLK_END        (1 << 10)   /* Data Block End */
+#define CMD_ACT            (1 << 11)   /* CMD Active */
+#define TX_ACT             (1 << 12)   /* Transmit Active */
+#define RX_ACT             (1 << 13)   /* Receive Active */
+#define TX_FIFO_STAT       (1 << 14)   /* Transmit FIFO Status */
+#define RX_FIFO_STAT       (1 << 15)   /* Receive FIFO Status */
+#define TX_FIFO_FULL       (1 << 16)   /* Transmit FIFO Full */
+#define RX_FIFO_FULL       (1 << 17)   /* Receive FIFO Full */
+#define TX_FIFO_ZERO       (1 << 18)   /* Transmit FIFO Empty */
+#define RX_DAT_ZERO        (1 << 19)   /* Receive FIFO Empty */
+#define TX_DAT_RDY         (1 << 20)   /* Transmit Data Available */
+#define RX_FIFO_RDY        (1 << 21)   /* Receive Data Available */
+
+/* SDH_STATUS_CLR bitmasks */
+#define CMD_CRC_FAIL_STAT  (1 << 0)    /* CMD CRC Fail Status */
+#define DAT_CRC_FAIL_STAT  (1 << 1)    /* Data CRC Fail Status */
+#define CMD_TIMEOUT_STAT   (1 << 2)    /* CMD Time Out Status */
+#define DAT_TIMEOUT_STAT   (1 << 3)    /* Data Time Out status */
+#define TX_UNDERRUN_STAT   (1 << 4)    /* Transmit Underrun Status */
+#define RX_OVERRUN_STAT    (1 << 5)    /* Receive Overrun Status */
+#define CMD_RESP_END_STAT  (1 << 6)    /* CMD Response End Status */
+#define CMD_SENT_STAT      (1 << 7)    /* CMD Sent Status */
+#define DAT_END_STAT       (1 << 8)    /* Data End Status */
+#define START_BIT_ERR_STAT (1 << 9)    /* Start Bit Error Status */
+#define DAT_BLK_END_STAT   (1 << 10)   /* Data Block End Status */
+
+/* SDH_MASK0 bitmasks */
+#define CMD_CRC_FAIL_MASK  (1 << 0)    /* CMD CRC Fail Mask */
+#define DAT_CRC_FAIL_MASK  (1 << 1)    /* Data CRC Fail Mask */
+#define CMD_TIMEOUT_MASK   (1 << 2)    /* CMD Time Out Mask */
+#define DAT_TIMEOUT_MASK   (1 << 3)    /* Data Time Out Mask */
+#define TX_UNDERRUN_MASK   (1 << 4)    /* Transmit Underrun Mask */
+#define RX_OVERRUN_MASK    (1 << 5)    /* Receive Overrun Mask */
+#define CMD_RESP_END_MASK  (1 << 6)    /* CMD Response End Mask */
+#define CMD_SENT_MASK      (1 << 7)    /* CMD Sent Mask */
+#define DAT_END_MASK       (1 << 8)    /* Data End Mask */
+#define START_BIT_ERR_MASK (1 << 9)    /* Start Bit Error Mask */
+#define DAT_BLK_END_MASK   (1 << 10)   /* Data Block End Mask */
+#define CMD_ACT_MASK       (1 << 11)   /* CMD Active Mask */
+#define TX_ACT_MASK        (1 << 12)   /* Transmit Active Mask */
+#define RX_ACT_MASK        (1 << 13)   /* Receive Active Mask */
+#define TX_FIFO_STAT_MASK  (1 << 14)   /* Transmit FIFO Status Mask */
+#define RX_FIFO_STAT_MASK  (1 << 15)   /* Receive FIFO Status Mask */
+#define TX_FIFO_FULL_MASK  (1 << 16)   /* Transmit FIFO Full Mask */
+#define RX_FIFO_FULL_MASK  (1 << 17)   /* Receive FIFO Full Mask */
+#define TX_FIFO_ZERO_MASK  (1 << 18)   /* Transmit FIFO Empty Mask */
+#define RX_DAT_ZERO_MASK   (1 << 19)   /* Receive FIFO Empty Mask */
+#define TX_DAT_RDY_MASK    (1 << 20)   /* Transmit Data Available Mask */
+#define RX_FIFO_RDY_MASK   (1 << 21)   /* Receive Data Available Mask */
+
+/* SDH_FIFO_CNT bitmasks */
+#define FIFO_COUNT         0x7fff      /* FIFO Count */
+
+/* SDH_E_STATUS bitmasks */
+#define SDIO_INT_DET       (1 << 1)    /* SDIO Int Detected */
+#define SD_CARD_DET        (1 << 4)    /* SD Card Detect */
+
+/* SDH_E_MASK bitmasks */
+#define SDIO_MSK           (1 << 1)    /* Mask SDIO Int Detected */
+#define SCD_MSK            (1 << 6)    /* Mask Card Detect */
+
+/* SDH_CFG bitmasks */
+#define CLKS_EN            (1 << 0)    /* Clocks Enable */
+#define SD4E               (1 << 2)    /* SDIO 4-Bit Enable */
+#define MWE                (1 << 3)    /* Moving Window Enable */
+#define SD_RST             (1 << 4)    /* SDMMC Reset */
+#define PUP_SDDAT          (1 << 5)    /* Pull-up SD_DAT */
+#define PUP_SDDAT3         (1 << 6)    /* Pull-up SD_DAT3 */
+#define PD_SDDAT3          (1 << 7)    /* Pull-down SD_DAT3 */
+
+/* SDH_RD_WAIT_EN bitmasks */
+#define RWR                (1 << 0)    /* Read Wait Request */
+
 #endif
diff --git a/arch/blackfin/include/asm/bitops.h b/arch/blackfin/include/asm/bitops.h
index 605ba8e9b2e4..d5872cd967ab 100644
--- a/arch/blackfin/include/asm/bitops.h
+++ b/arch/blackfin/include/asm/bitops.h
@@ -119,7 +119,7 @@ static inline unsigned int hweight32(unsigned int w)
 {
 	unsigned int res;
 
-	__asm__ ("%0.l = ONES %0;"
+	__asm__ ("%0.l = ONES %1;"
 		"%0 = %0.l (Z);"
 		: "=d" (res) : "d" (w));
 	return res;
diff --git a/arch/blackfin/include/asm/cdef_LPBlackfin.h b/arch/blackfin/include/asm/cdef_LPBlackfin.h
index 8778e0f03730..6c39d94b44d0 100644
--- a/arch/blackfin/include/asm/cdef_LPBlackfin.h
+++ b/arch/blackfin/include/asm/cdef_LPBlackfin.h
@@ -216,12 +216,16 @@
 #define bfin_write_EVT14(val)                bfin_write32(EVT14,val)
 #define bfin_read_EVT15()                    bfin_read32(EVT15)
 #define bfin_write_EVT15(val)                bfin_write32(EVT15,val)
+#define bfin_read_EVT_OVERRIDE()             bfin_read32(EVT_OVERRIDE)
+#define bfin_write_EVT_OVERRIDE(val)         bfin_write32(EVT_OVERRIDE,val)
 #define bfin_read_IMASK()                    bfin_read32(IMASK)
 #define bfin_write_IMASK(val)                bfin_write32(IMASK,val)
 #define bfin_read_IPEND()                    bfin_read32(IPEND)
 #define bfin_write_IPEND(val)                bfin_write32(IPEND,val)
 #define bfin_read_ILAT()                     bfin_read32(ILAT)
 #define bfin_write_ILAT(val)                 bfin_write32(ILAT,val)
+#define bfin_read_IPRIO()                    bfin_read32(IPRIO)
+#define bfin_write_IPRIO(val)                bfin_write32(IPRIO,val)
 
 /*Core Timer Registers*/
 #define bfin_read_TCNTL()                    bfin_read32(TCNTL)
@@ -299,8 +303,4 @@
 #define bfin_read_PFCNTR1()                  bfin_read32(PFCNTR1)
 #define bfin_write_PFCNTR1(val)              bfin_write32(PFCNTR1,val)
 
-/*
-#define IPRIO                  0xFFE02110
-*/
-
 #endif				/* _CDEF_LPBLACKFIN_H */
diff --git a/arch/blackfin/include/asm/def_LPBlackfin.h b/arch/blackfin/include/asm/def_LPBlackfin.h
index f342ff0319df..e3f0f4c49819 100644
--- a/arch/blackfin/include/asm/def_LPBlackfin.h
+++ b/arch/blackfin/include/asm/def_LPBlackfin.h
@@ -50,6 +50,23 @@
 #define bfin_write16(addr, val) _bfin_writeX(addr, val, 16, w)
 #define bfin_write32(addr, val) _bfin_writeX(addr, val, 32,  )
 
+#define bfin_read(addr) \
+({ \
+    sizeof(*(addr)) == 1 ? bfin_read8(addr)  : \
+    sizeof(*(addr)) == 2 ? bfin_read16(addr) : \
+    sizeof(*(addr)) == 4 ? bfin_read32(addr) : \
+    ({ BUG(); 0; }); \
+})
+#define bfin_write(addr, val) \
+({ \
+	switch (sizeof(*(addr))) { \
+	case 1: bfin_write8(addr, val);  break; \
+	case 2: bfin_write16(addr, val); break; \
+	case 4: bfin_write32(addr, val); break; \
+	default: BUG(); \
+	} \
+})
+
 #endif /* __ASSEMBLY__ */
 
 /**************************************************
@@ -377,6 +394,7 @@
 #define EVT13              0xFFE02034	/* Event Vector 13 ESR Address */
 #define EVT14              0xFFE02038	/* Event Vector 14 ESR Address */
 #define EVT15              0xFFE0203C	/* Event Vector 15 ESR Address */
+#define EVT_OVERRIDE       0xFFE02100	/* Event Vector Override Register */
 #define IMASK              0xFFE02104	/* Interrupt Mask Register */
 #define IPEND              0xFFE02108	/* Interrupt Pending Register */
 #define ILAT               0xFFE0210C	/* Interrupt Latch Register */
diff --git a/arch/blackfin/include/asm/dma.h b/arch/blackfin/include/asm/dma.h
index 2c09b1d50ec9..eedf3ca65ba2 100644
--- a/arch/blackfin/include/asm/dma.h
+++ b/arch/blackfin/include/asm/dma.h
@@ -276,6 +276,7 @@ static inline void clear_dma_irqstat(unsigned int channel)
 }
 
 void *dma_memcpy(void *dest, const void *src, size_t count);
+void *dma_memcpy_nocache(void *dest, const void *src, size_t count);
 void *safe_dma_memcpy(void *dest, const void *src, size_t count);
 void blackfin_dma_early_init(void);
 void early_dma_memcpy(void *dest, const void *src, size_t count);
diff --git a/arch/blackfin/include/asm/elf.h b/arch/blackfin/include/asm/elf.h
index 117713adea7f..e6c6812a9abd 100644
--- a/arch/blackfin/include/asm/elf.h
+++ b/arch/blackfin/include/asm/elf.h
@@ -119,6 +119,7 @@ do {											\
 #define ELF_CORE_COPY_REGS(pr_reg, regs)	\
         memcpy((char *) &pr_reg, (char *)regs,  \
                sizeof(struct pt_regs));
+#define ELF_CORE_COPY_FPREGS(...) 0	/* Blackfin has no FPU */
 
 /* This yields a mask that user programs can use to figure out what
    instruction set this cpu supports.  */
diff --git a/arch/blackfin/include/asm/ftrace.h b/arch/blackfin/include/asm/ftrace.h
index 4cfe2d9ba7e8..8a029505d7b7 100644
--- a/arch/blackfin/include/asm/ftrace.h
+++ b/arch/blackfin/include/asm/ftrace.h
@@ -12,6 +12,22 @@
 
 #ifndef __ASSEMBLY__
 
+#ifdef CONFIG_DYNAMIC_FTRACE
+
+extern void _mcount(void);
+#define MCOUNT_ADDR ((unsigned long)_mcount)
+
+static inline unsigned long ftrace_call_adjust(unsigned long addr)
+{
+	return addr;
+}
+
+struct dyn_arch_ftrace {
+	/* No extra data needed for Blackfin */
+};
+
+#endif
+
 #ifdef CONFIG_FRAME_POINTER
 #include <linux/mm.h>
 
diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h
index 01b19d0cf509..1ef8417f5d27 100644
--- a/arch/blackfin/include/asm/gpio.h
+++ b/arch/blackfin/include/asm/gpio.h
@@ -7,63 +7,63 @@
 #ifndef __ARCH_BLACKFIN_GPIO_H__
 #define __ARCH_BLACKFIN_GPIO_H__
 
-#define gpio_bank(x) 	((x) >> 4)
-#define gpio_bit(x)  	(1<<((x) & 0xF))
-#define gpio_sub_n(x) 	((x) & 0xF)
+#define gpio_bank(x)	((x) >> 4)
+#define gpio_bit(x)	(1<<((x) & 0xF))
+#define gpio_sub_n(x)	((x) & 0xF)
 
-#define GPIO_BANKSIZE 	16
-#define GPIO_BANK_NUM 	DIV_ROUND_UP(MAX_BLACKFIN_GPIOS, GPIO_BANKSIZE)
+#define GPIO_BANKSIZE	16
+#define GPIO_BANK_NUM	DIV_ROUND_UP(MAX_BLACKFIN_GPIOS, GPIO_BANKSIZE)
 
 #include <mach/gpio.h>
 
-#define	GPIO_0	0
-#define	GPIO_1	1
-#define	GPIO_2	2
-#define	GPIO_3	3
-#define	GPIO_4	4
-#define	GPIO_5	5
-#define	GPIO_6	6
-#define	GPIO_7	7
-#define	GPIO_8	8
-#define	GPIO_9	9
-#define	GPIO_10	10
-#define	GPIO_11	11
-#define	GPIO_12	12
-#define	GPIO_13	13
-#define	GPIO_14	14
-#define	GPIO_15	15
-#define	GPIO_16	16
-#define	GPIO_17	17
-#define	GPIO_18	18
-#define	GPIO_19	19
-#define	GPIO_20	20
-#define	GPIO_21	21
-#define	GPIO_22	22
-#define	GPIO_23	23
-#define	GPIO_24	24
-#define	GPIO_25	25
-#define	GPIO_26	26
-#define	GPIO_27	27
-#define	GPIO_28	28
-#define	GPIO_29	29
-#define	GPIO_30	30
-#define	GPIO_31	31
-#define	GPIO_32	32
-#define	GPIO_33	33
-#define	GPIO_34	34
-#define	GPIO_35	35
-#define	GPIO_36	36
-#define	GPIO_37	37
-#define	GPIO_38	38
-#define	GPIO_39	39
-#define	GPIO_40	40
-#define	GPIO_41	41
-#define	GPIO_42	42
-#define	GPIO_43	43
-#define	GPIO_44	44
-#define	GPIO_45	45
-#define	GPIO_46	46
-#define	GPIO_47	47
+#define GPIO_0	0
+#define GPIO_1	1
+#define GPIO_2	2
+#define GPIO_3	3
+#define GPIO_4	4
+#define GPIO_5	5
+#define GPIO_6	6
+#define GPIO_7	7
+#define GPIO_8	8
+#define GPIO_9	9
+#define GPIO_10	10
+#define GPIO_11	11
+#define GPIO_12	12
+#define GPIO_13	13
+#define GPIO_14	14
+#define GPIO_15	15
+#define GPIO_16	16
+#define GPIO_17	17
+#define GPIO_18	18
+#define GPIO_19	19
+#define GPIO_20	20
+#define GPIO_21	21
+#define GPIO_22	22
+#define GPIO_23	23
+#define GPIO_24	24
+#define GPIO_25	25
+#define GPIO_26	26
+#define GPIO_27	27
+#define GPIO_28	28
+#define GPIO_29	29
+#define GPIO_30	30
+#define GPIO_31	31
+#define GPIO_32	32
+#define GPIO_33	33
+#define GPIO_34	34
+#define GPIO_35	35
+#define GPIO_36	36
+#define GPIO_37	37
+#define GPIO_38	38
+#define GPIO_39	39
+#define GPIO_40	40
+#define GPIO_41	41
+#define GPIO_42	42
+#define GPIO_43	43
+#define GPIO_44	44
+#define GPIO_45	45
+#define GPIO_46	46
+#define GPIO_47	47
 
 #define PERIPHERAL_USAGE 1
 #define GPIO_USAGE 0
@@ -279,6 +279,11 @@ static inline int gpio_direction_output(unsigned gpio, int value)
 	return bfin_gpio_direction_output(gpio, value);
 }
 
+static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
+{
+	return -EINVAL;
+}
+
 static inline int gpio_get_value(unsigned gpio)
 {
 	return bfin_gpio_get_value(gpio);
diff --git a/arch/blackfin/include/asm/io.h b/arch/blackfin/include/asm/io.h
index 29e55b9d88bc..234fbac17ec1 100644
--- a/arch/blackfin/include/asm/io.h
+++ b/arch/blackfin/include/asm/io.h
@@ -124,7 +124,13 @@ static inline unsigned int readl(const volatile void __iomem *addr)
 #define iowrite16(val, x)		writew(val, x)
 #define iowrite32(val, x)		writel(val, x)
 
-#define mmiowb() wmb()
+/**
+ * I/O write barrier
+ *
+ * Ensure ordering of I/O space writes. This will make sure that writes
+ * following the barrier will arrive after all previous writes.
+ */
+#define mmiowb() do { SSYNC(); wmb(); } while (0)
 
 #define IO_SPACE_LIMIT 0xffffffff
 
diff --git a/arch/blackfin/include/asm/mem_init.h b/arch/blackfin/include/asm/mem_init.h
index 7c8fe834ff22..237579935e29 100644
--- a/arch/blackfin/include/asm/mem_init.h
+++ b/arch/blackfin/include/asm/mem_init.h
@@ -10,7 +10,6 @@
 #if defined(CONFIG_MEM_MT48LC16M16A2TG_75) || \
     defined(CONFIG_MEM_MT48LC64M4A2FB_7E) || \
     defined(CONFIG_MEM_MT48LC16M8A2TG_75) || \
-    defined(CONFIG_MEM_GENERIC_BOARD) || \
     defined(CONFIG_MEM_MT48LC32M8A2_75) || \
     defined(CONFIG_MEM_MT48LC8M32B2B5_7) || \
     defined(CONFIG_MEM_MT48LC32M16A2TG_75) || \
@@ -178,7 +177,6 @@
 
 #if defined(CONFIG_MEM_MT48LC32M8A2_75) || \
     defined(CONFIG_MEM_MT48LC64M4A2FB_7E) || \
-    defined(CONFIG_MEM_GENERIC_BOARD) || \
     defined(CONFIG_MEM_MT48LC32M16A2TG_75) || \
     defined(CONFIG_MEM_MT48LC16M16A2TG_75) || \
     defined(CONFIG_MEM_MT48LC32M8A2_75)
@@ -248,22 +246,6 @@
 #define DDR_tWR		DDR_TWR(MIN_DDR_SCLK(15))
 #endif
 
-#if defined(CONFIG_MEM_GENERIC_BOARD)
-#define DDR_SIZE	DEVSZ_512
-#define DDR_WIDTH	DEVWD_16
-#define DDR_MAX_tCK	13
-
-#define DDR_tRCD	DDR_TRCD(3)
-#define DDR_tWTR	DDR_TWTR(2)
-#define DDR_tWR		DDR_TWR(2)
-#define DDR_tMRD	DDR_TMRD(2)
-#define DDR_tRP		DDR_TRP(3)
-#define DDR_tRAS	DDR_TRAS(7)
-#define DDR_tRC		DDR_TRC(10)
-#define DDR_tRFC	DDR_TRFC(12)
-#define DDR_tREFI	DDR_TREFI(1288)
-#endif
-
 #if (CONFIG_SCLK_HZ < DDR_CLK_HZ(DDR_MAX_tCK))
 # error "CONFIG_SCLK_HZ is too small (<DDR_CLK_HZ(DDR_MAX_tCK) Hz)."
 #elif(CONFIG_SCLK_HZ <= 133333333)
diff --git a/arch/blackfin/include/asm/portmux.h b/arch/blackfin/include/asm/portmux.h
index edd8ef3a3788..9b1e2c37b324 100644
--- a/arch/blackfin/include/asm/portmux.h
+++ b/arch/blackfin/include/asm/portmux.h
@@ -1,9 +1,9 @@
 /*
  * Common header file for Blackfin family of processors
  *
- * Copyright 2007-2008 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _PORTMUX_H_
@@ -1042,8 +1042,8 @@ void peripheral_free_list(const unsigned short per[]);
 #define P_NOR_CLK P_UNDEF
 #endif
 
-#ifndef  P_TMRCLK
-#define  P_TMRCLK P_UNDEF
+#ifndef P_TMRCLK
+#define P_TMRCLK P_UNDEF
 #endif
 
 #ifndef P_AMC_ARDY_NOR_WAIT