Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

18 files changed, 124 insertions, 114 deletions

diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index 3a5cfb0ddb20..c87066d6c995 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -326,9 +326,6 @@
 
 					clocks = <&xtal_32k>, <&xtal>;
 					clock-names = "xtal_32k", "xtal";
-
-					assigned-clocks = <&clk LPC32XX_CLK_HCLK_PLL>;
-					assigned-clock-rates = <208000000>;
 				};
 			};
 
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index c8745bc800f7..7b8c18e6605e 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -114,7 +114,7 @@
 		gpio-sck = <&gpio1 12 GPIO_ACTIVE_HIGH>;
 		gpio-miso = <&gpio1 18 GPIO_ACTIVE_HIGH>;
 		gpio-mosi = <&gpio1 20 GPIO_ACTIVE_HIGH>;
-		cs-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
 		num-chipselects = <1>;
 
 		/* lcd panel */
@@ -124,7 +124,6 @@
 			spi-max-frequency = <100000>;
 			spi-cpol;
 			spi-cpha;
-			spi-cs-high;
 
 			backlight= <&backlight>;
 			label = "lcd";
diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
index 3ea4c5b9fd31..e833c21f1c01 100644
--- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
@@ -16,8 +16,13 @@
 			debounce-interval = <10>;
 		};
 
+		/*
+		 * We use pad 0x4a100116 abe_dmic_din3.gpio_122 as the irq instead
+		 * of the gpio interrupt to avoid lost events in deeper idle states.
+		*/
 		slider {
 			label = "Keypad Slide";
+			interrupts-extended = <&omap4_pmx_core 0xd6>;
 			gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio122 */
 			linux,input-type = <EV_SW>;
 			linux,code = <SW_KEYPAD_SLIDE>;
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi
index 62ab23824a3e..5088dd3a301b 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi
@@ -33,9 +33,9 @@
 	 * during TX anyway and that it only controls drive enable DE
 	 * line. Hence, the RX is always enabled here.
 	 */
-	rs485-rx-en {
+	rs485-rx-en-hog {
 		gpio-hog;
-		gpios = <8 GPIO_ACTIVE_HIGH>;
+		gpios = <8 0>;
 		output-low;
 		line-name = "rs485-rx-en";
 	};
@@ -61,9 +61,9 @@
 	 * order to reset the Hub when USB bus is powered down, but
 	 * so far there is no such functionality.
 	 */
-	usb-hub {
+	usb-hub-hog {
 		gpio-hog;
-		gpios = <2 GPIO_ACTIVE_HIGH>;
+		gpios = <2 0>;
 		output-high;
 		line-name = "usb-hub-reset";
 	};
@@ -87,6 +87,12 @@
 	};
 };
 
+&i2c4 {
+	touchscreen@49 {
+		status = "disabled";
+	};
+};
+
 &i2c5 {	/* TP7/TP8 */
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c5_pins_a>;
@@ -104,7 +110,7 @@
 	 * are used for on-board microSD slot instead.
 	 */
 	/delete-property/broken-cd;
-	cd-gpios = <&gpioi 10 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	cd-gpios = <&gpioi 10 GPIO_ACTIVE_HIGH>;
 	disable-wp;
 };
 
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi
index 356150d28c42..32700cca24c8 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi
@@ -43,9 +43,9 @@
 	 * in order to turn on port power when USB bus is powered up, but so
 	 * far there is no such functionality.
 	 */
-	usb-port-power {
+	usb-port-power-hog {
 		gpio-hog;
-		gpios = <13 GPIO_ACTIVE_LOW>;
+		gpios = <13 0>;
 		output-low;
 		line-name = "usb-port-power";
 	};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
index ac46ab363e1b..daff5318f301 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
@@ -390,7 +390,8 @@
 	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
 	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>;
 	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>;
-	broken-cd;
+	cd-gpios = <&gpiog 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	disable-wp;
 	st,sig-dir;
 	st,neg-edge;
 	st,use-ckin;
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
index 01ccff756996..5740f9442705 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
@@ -110,7 +110,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
 };
diff --git a/arch/arm/include/asm/kexec-internal.h b/arch/arm/include/asm/kexec-internal.h
new file mode 100644
index 000000000000..ecc2322db7aa
--- /dev/null
+++ b/arch/arm/include/asm/kexec-internal.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ARM_KEXEC_INTERNAL_H
+#define _ARM_KEXEC_INTERNAL_H
+
+struct kexec_relocate_data {
+	unsigned long kexec_start_address;
+	unsigned long kexec_indirection_page;
+	unsigned long kexec_mach_type;
+	unsigned long kexec_r2;
+};
+
+#endif
diff --git a/arch/arm/include/debug/tegra.S b/arch/arm/include/debug/tegra.S
index 98daa7f48314..7454480d084b 100644
--- a/arch/arm/include/debug/tegra.S
+++ b/arch/arm/include/debug/tegra.S
@@ -149,7 +149,34 @@
 
 		.align
 99:		.word	.
+#if defined(ZIMAGE)
+		.word	. + 4
+/*
+ * Storage for the state maintained by the macro.
+ *
+ * In the kernel proper, this data is located in arch/arm/mach-tegra/tegra.c.
+ * That's because this header is included from multiple files, and we only
+ * want a single copy of the data. In particular, the UART probing code above
+ * assumes it's running using physical addresses. This is true when this file
+ * is included from head.o, but not when included from debug.o. So we need
+ * to share the probe results between the two copies, rather than having
+ * to re-run the probing again later.
+ *
+ * In the decompressor, we put the storage right here, since common.c
+ * isn't included in the decompressor build. This storage data gets put in
+ * .text even though it's really data, since .data is discarded from the
+ * decompressor. Luckily, .text is writeable in the decompressor, unless
+ * CONFIG_ZBOOT_ROM. That dependency is handled in arch/arm/Kconfig.debug.
+ */
+		/* Debug UART initialization required */
+		.word	1
+		/* Debug UART physical address */
+		.word	0
+		/* Debug UART virtual address */
+		.word	0
+#else
 		.word	tegra_uart_config
+#endif
 		.ltorg
 
 		/* Load previously selected UART address */
@@ -189,30 +216,3 @@
 
 		.macro	waituarttxrdy,rd,rx
 		.endm
-
-/*
- * Storage for the state maintained by the macros above.
- *
- * In the kernel proper, this data is located in arch/arm/mach-tegra/tegra.c.
- * That's because this header is included from multiple files, and we only
- * want a single copy of the data. In particular, the UART probing code above
- * assumes it's running using physical addresses. This is true when this file
- * is included from head.o, but not when included from debug.o. So we need
- * to share the probe results between the two copies, rather than having
- * to re-run the probing again later.
- *
- * In the decompressor, we put the symbol/storage right here, since common.c
- * isn't included in the decompressor build. This symbol gets put in .text
- * even though it's really data, since .data is discarded from the
- * decompressor. Luckily, .text is writeable in the decompressor, unless
- * CONFIG_ZBOOT_ROM. That dependency is handled in arch/arm/Kconfig.debug.
- */
-#if defined(ZIMAGE)
-tegra_uart_config:
-	/* Debug UART initialization required */
-	.word 1
-	/* Debug UART physical address */
-	.word 0
-	/* Debug UART virtual address */
-	.word 0
-#endif
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
index a1570c8bab25..be8050b0c3df 100644
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@@ -12,6 +12,7 @@
 #include <linux/mm.h>
 #include <linux/dma-mapping.h>
 #include <asm/cacheflush.h>
+#include <asm/kexec-internal.h>
 #include <asm/glue-df.h>
 #include <asm/glue-pf.h>
 #include <asm/mach/arch.h>
@@ -170,5 +171,9 @@ int main(void)
   DEFINE(MPU_RGN_PRBAR,	offsetof(struct mpu_rgn, prbar));
   DEFINE(MPU_RGN_PRLAR,	offsetof(struct mpu_rgn, prlar));
 #endif
+  DEFINE(KEXEC_START_ADDR,	offsetof(struct kexec_relocate_data, kexec_start_address));
+  DEFINE(KEXEC_INDIR_PAGE,	offsetof(struct kexec_relocate_data, kexec_indirection_page));
+  DEFINE(KEXEC_MACH_TYPE,	offsetof(struct kexec_relocate_data, kexec_mach_type));
+  DEFINE(KEXEC_R2,		offsetof(struct kexec_relocate_data, kexec_r2));
   return 0; 
 }
diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c
index 5d84ad333f05..2b09dad7935e 100644
--- a/arch/arm/kernel/machine_kexec.c
+++ b/arch/arm/kernel/machine_kexec.c
@@ -13,6 +13,7 @@
 #include <linux/of_fdt.h>
 #include <asm/mmu_context.h>
 #include <asm/cacheflush.h>
+#include <asm/kexec-internal.h>
 #include <asm/fncpy.h>
 #include <asm/mach-types.h>
 #include <asm/smp_plat.h>
@@ -22,11 +23,6 @@
 extern void relocate_new_kernel(void);
 extern const unsigned int relocate_new_kernel_size;
 
-extern unsigned long kexec_start_address;
-extern unsigned long kexec_indirection_page;
-extern unsigned long kexec_mach_type;
-extern unsigned long kexec_boot_atags;
-
 static atomic_t waiting_for_crash_ipi;
 
 /*
@@ -159,6 +155,7 @@ void (*kexec_reinit)(void);
 void machine_kexec(struct kimage *image)
 {
 	unsigned long page_list, reboot_entry_phys;
+	struct kexec_relocate_data *data;
 	void (*reboot_entry)(void);
 	void *reboot_code_buffer;
 
@@ -174,18 +171,17 @@ void machine_kexec(struct kimage *image)
 
 	reboot_code_buffer = page_address(image->control_code_page);
 
-	/* Prepare parameters for reboot_code_buffer*/
-	set_kernel_text_rw();
-	kexec_start_address = image->start;
-	kexec_indirection_page = page_list;
-	kexec_mach_type = machine_arch_type;
-	kexec_boot_atags = image->arch.kernel_r2;
-
 	/* copy our kernel relocation code to the control code page */
 	reboot_entry = fncpy(reboot_code_buffer,
 			     &relocate_new_kernel,
 			     relocate_new_kernel_size);
 
+	data = reboot_code_buffer + relocate_new_kernel_size;
+	data->kexec_start_address = image->start;
+	data->kexec_indirection_page = page_list;
+	data->kexec_mach_type = machine_arch_type;
+	data->kexec_r2 = image->arch.kernel_r2;
+
 	/* get the identity mapping physical address for the reboot code */
 	reboot_entry_phys = virt_to_idmap(reboot_entry);
 
diff --git a/arch/arm/kernel/relocate_kernel.S b/arch/arm/kernel/relocate_kernel.S
index 72a08786e16e..218d524360fc 100644
--- a/arch/arm/kernel/relocate_kernel.S
+++ b/arch/arm/kernel/relocate_kernel.S
@@ -5,14 +5,16 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
+#include <asm/asm-offsets.h>
 #include <asm/kexec.h>
 
 	.align	3	/* not needed for this code, but keeps fncpy() happy */
 
 ENTRY(relocate_new_kernel)
 
-	ldr	r0,kexec_indirection_page
-	ldr	r1,kexec_start_address
+	adr	r7, relocate_new_kernel_end
+	ldr	r0, [r7, #KEXEC_INDIR_PAGE]
+	ldr	r1, [r7, #KEXEC_START_ADDR]
 
 	/*
 	 * If there is no indirection page (we are doing crashdumps)
@@ -57,34 +59,16 @@ ENTRY(relocate_new_kernel)
 
 2:
 	/* Jump to relocated kernel */
-	mov lr,r1
-	mov r0,#0
-	ldr r1,kexec_mach_type
-	ldr r2,kexec_boot_atags
- ARM(	ret lr	)
- THUMB(	bx lr		)
-
-	.align
-
-	.globl kexec_start_address
-kexec_start_address:
-	.long	0x0
-
-	.globl kexec_indirection_page
-kexec_indirection_page:
-	.long	0x0
-
-	.globl kexec_mach_type
-kexec_mach_type:
-	.long	0x0
-
-	/* phy addr of the atags for the new kernel */
-	.globl kexec_boot_atags
-kexec_boot_atags:
-	.long	0x0
+	mov	lr, r1
+	mov	r0, #0
+	ldr	r1, [r7, #KEXEC_MACH_TYPE]
+	ldr	r2, [r7, #KEXEC_R2]
+ ARM(	ret	lr	)
+ THUMB(	bx	lr	)
 
 ENDPROC(relocate_new_kernel)
 
+	.align	3
 relocate_new_kernel_end:
 
 	.globl relocate_new_kernel_size
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 9d2e916121be..a3a38d0a4c85 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -693,18 +693,20 @@ struct page *get_signal_page(void)
 
 	addr = page_address(page);
 
+	/* Poison the entire page */
+	memset32(addr, __opcode_to_mem_arm(0xe7fddef1),
+		 PAGE_SIZE / sizeof(u32));
+
 	/* Give the signal return code some randomness */
 	offset = 0x200 + (get_random_int() & 0x7fc);
 	signal_return_offset = offset;
 
-	/*
-	 * Copy signal return handlers into the vector page, and
-	 * set sigreturn to be a pointer to these.
-	 */
+	/* Copy signal return handlers into the page */
 	memcpy(addr + offset, sigreturn_codes, sizeof(sigreturn_codes));
 
-	ptr = (unsigned long)addr + offset;
-	flush_icache_range(ptr, ptr + sizeof(sigreturn_codes));
+	/* Flush out all instructions in this page */
+	ptr = (unsigned long)addr;
+	flush_icache_range(ptr, ptr + PAGE_SIZE);
 
 	return page;
 }
diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c
index 416462e3f5d6..f9713dc561cf 100644
--- a/arch/arm/mach-footbridge/dc21285.c
+++ b/arch/arm/mach-footbridge/dc21285.c
@@ -65,15 +65,15 @@ dc21285_read_config(struct pci_bus *bus, unsigned int devfn, int where,
 	if (addr)
 		switch (size) {
 		case 1:
-			asm("ldrb	%0, [%1, %2]"
+			asm volatile("ldrb	%0, [%1, %2]"
 				: "=r" (v) : "r" (addr), "r" (where) : "cc");
 			break;
 		case 2:
-			asm("ldrh	%0, [%1, %2]"
+			asm volatile("ldrh	%0, [%1, %2]"
 				: "=r" (v) : "r" (addr), "r" (where) : "cc");
 			break;
 		case 4:
-			asm("ldr	%0, [%1, %2]"
+			asm volatile("ldr	%0, [%1, %2]"
 				: "=r" (v) : "r" (addr), "r" (where) : "cc");
 			break;
 		}
@@ -99,17 +99,17 @@ dc21285_write_config(struct pci_bus *bus, unsigned int devfn, int where,
 	if (addr)
 		switch (size) {
 		case 1:
-			asm("strb	%0, [%1, %2]"
+			asm volatile("strb	%0, [%1, %2]"
 				: : "r" (value), "r" (addr), "r" (where)
 				: "cc");
 			break;
 		case 2:
-			asm("strh	%0, [%1, %2]"
+			asm volatile("strh	%0, [%1, %2]"
 				: : "r" (value), "r" (addr), "r" (where)
 				: "cc");
 			break;
 		case 4:
-			asm("str	%0, [%1, %2]"
+			asm volatile("str	%0, [%1, %2]"
 				: : "r" (value), "r" (addr), "r" (where)
 				: "cc");
 			break;
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index a720259099ed..0a4c9b0b13b0 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -203,6 +203,8 @@ static int osk_tps_setup(struct i2c_client *client, void *context)
 	 */
 	gpio_request(OSK_TPS_GPIO_USB_PWR_EN, "n_vbus_en");
 	gpio_direction_output(OSK_TPS_GPIO_USB_PWR_EN, 1);
+	/* Free the GPIO again as the driver will request it */
+	gpio_free(OSK_TPS_GPIO_USB_PWR_EN);
 
 	/* Set GPIO 2 high so LED D3 is off by default */
 	tps65010_set_gpio_out_value(GPIO2, HIGH);
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 4a59c169a113..4178c0ee46eb 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -17,11 +17,10 @@ config ARCH_OMAP3
 	bool "TI OMAP3"
 	depends on ARCH_MULTI_V7
 	select ARCH_OMAP2PLUS
-	select ARM_CPU_SUSPEND if PM
+	select ARM_CPU_SUSPEND
 	select OMAP_HWMOD
 	select OMAP_INTERCONNECT
-	select PM_OPP if PM
-	select PM if CPU_IDLE
+	select PM_OPP
 	select SOC_HAS_OMAP2_SDRC
 	select ARM_ERRATA_430973
 
@@ -30,7 +29,7 @@ config ARCH_OMAP4
 	depends on ARCH_MULTI_V7
 	select ARCH_OMAP2PLUS
 	select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
-	select ARM_CPU_SUSPEND if PM
+	select ARM_CPU_SUSPEND
 	select ARM_ERRATA_720789
 	select ARM_GIC
 	select HAVE_ARM_SCU if SMP
@@ -40,7 +39,7 @@ config ARCH_OMAP4
 	select OMAP_INTERCONNECT_BARRIER
 	select PL310_ERRATA_588369 if CACHE_L2X0
 	select PL310_ERRATA_727915 if CACHE_L2X0
-	select PM_OPP if PM
+	select PM_OPP
 	select PM if CPU_IDLE
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_775420
@@ -50,7 +49,7 @@ config SOC_OMAP5
 	bool "TI OMAP5"
 	depends on ARCH_MULTI_V7
 	select ARCH_OMAP2PLUS
-	select ARM_CPU_SUSPEND if PM
+	select ARM_CPU_SUSPEND
 	select ARM_GIC
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_ARCH_TIMER
@@ -58,14 +57,14 @@ config SOC_OMAP5
 	select OMAP_HWMOD
 	select OMAP_INTERCONNECT
 	select OMAP_INTERCONNECT_BARRIER
-	select PM_OPP if PM
+	select PM_OPP
 	select ZONE_DMA if ARM_LPAE
 
 config SOC_AM33XX
 	bool "TI AM33XX"
 	depends on ARCH_MULTI_V7
 	select ARCH_OMAP2PLUS
-	select ARM_CPU_SUSPEND if PM
+	select ARM_CPU_SUSPEND
 
 config SOC_AM43XX
 	bool "TI AM43x"
@@ -79,13 +78,13 @@ config SOC_AM43XX
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_775420
 	select OMAP_INTERCONNECT
-	select ARM_CPU_SUSPEND if PM
+	select ARM_CPU_SUSPEND
 
 config SOC_DRA7XX
 	bool "TI DRA7XX"
 	depends on ARCH_MULTI_V7
 	select ARCH_OMAP2PLUS
-	select ARM_CPU_SUSPEND if PM
+	select ARM_CPU_SUSPEND
 	select ARM_GIC
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_ARCH_TIMER
@@ -94,7 +93,7 @@ config SOC_DRA7XX
 	select OMAP_HWMOD
 	select OMAP_INTERCONNECT
 	select OMAP_INTERCONNECT_BARRIER
-	select PM_OPP if PM
+	select PM_OPP
 	select ZONE_DMA if ARM_LPAE
 	select PINCTRL_TI_IODELAY if OF && PINCTRL
 
@@ -112,9 +111,11 @@ config ARCH_OMAP2PLUS
 	select OMAP_DM_TIMER
 	select OMAP_GPMC
 	select PINCTRL
-	select PM_GENERIC_DOMAINS if PM
-	select PM_GENERIC_DOMAINS_OF if PM
+	select PM
+	select PM_GENERIC_DOMAINS
+	select PM_GENERIC_DOMAINS_OF
 	select RESET_CONTROLLER
+	select SIMPLE_PM_BUS
 	select SOC_BUS
 	select TI_SYSC
 	select OMAP_IRQCHIP
@@ -140,7 +141,6 @@ config ARCH_OMAP2PLUS_TYPICAL
 	select I2C_OMAP
 	select MENELAUS if ARCH_OMAP2
 	select NEON if CPU_V7
-	select PM
 	select REGULATOR
 	select REGULATOR_FIXED_VOLTAGE
 	select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
index c8d317fafe2e..de37027ad758 100644
--- a/arch/arm/mach-omap2/cpuidle44xx.c
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -151,10 +151,10 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 				 (cx->mpu_logic_state == PWRDM_POWER_OFF);
 
 	/* Enter broadcast mode for periodic timers */
-	tick_broadcast_enable();
+	RCU_NONIDLE(tick_broadcast_enable());
 
 	/* Enter broadcast mode for one-shot timers */
-	tick_broadcast_enter();
+	RCU_NONIDLE(tick_broadcast_enter());
 
 	/*
 	 * Call idle CPU PM enter notifier chain so that
@@ -166,7 +166,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 
 	if (dev->cpu == 0) {
 		pwrdm_set_logic_retst(mpu_pd, cx->mpu_logic_state);
-		omap_set_pwrdm_state(mpu_pd, cx->mpu_state);
+		RCU_NONIDLE(omap_set_pwrdm_state(mpu_pd, cx->mpu_state));
 
 		/*
 		 * Call idle CPU cluster PM enter notifier chain
@@ -178,7 +178,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 				index = 0;
 				cx = state_ptr + index;
 				pwrdm_set_logic_retst(mpu_pd, cx->mpu_logic_state);
-				omap_set_pwrdm_state(mpu_pd, cx->mpu_state);
+				RCU_NONIDLE(omap_set_pwrdm_state(mpu_pd, cx->mpu_state));
 				mpuss_can_lose_context = 0;
 			}
 		}
@@ -194,9 +194,9 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 		    mpuss_can_lose_context)
 			gic_dist_disable();
 
-		clkdm_deny_idle(cpu_clkdm[1]);
-		omap_set_pwrdm_state(cpu_pd[1], PWRDM_POWER_ON);
-		clkdm_allow_idle(cpu_clkdm[1]);
+		RCU_NONIDLE(clkdm_deny_idle(cpu_clkdm[1]));
+		RCU_NONIDLE(omap_set_pwrdm_state(cpu_pd[1], PWRDM_POWER_ON));
+		RCU_NONIDLE(clkdm_allow_idle(cpu_clkdm[1]));
 
 		if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD) &&
 		    mpuss_can_lose_context) {
@@ -222,7 +222,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 	cpu_pm_exit();
 
 cpu_pm_out:
-	tick_broadcast_exit();
+	RCU_NONIDLE(tick_broadcast_exit());
 
 fail:
 	cpuidle_coupled_parallel_barrier(dev, &abort_barrier);
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index cd38bf07c094..2e3a10914c40 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -522,6 +522,7 @@ static struct of_dev_auxdata omap_auxdata_lookup[] = {
 		       &dra7_ipu1_dsp_iommu_pdata),
 #endif
 	/* Common auxdata */
+	OF_DEV_AUXDATA("simple-pm-bus", 0, NULL, omap_auxdata_lookup),
 	OF_DEV_AUXDATA("ti,sysc", 0, NULL, &ti_sysc_pdata),
 	OF_DEV_AUXDATA("pinctrl-single", 0, NULL, &pcs_pdata),
 	OF_DEV_AUXDATA("ti,omap-prm-inst", 0, NULL, &ti_prm_pdata),