ARM: at91: remove at91sam9g45/9m10 legacy board support

Remove legacy support for at91sam9g45/9m10 boards.
This include board files removal plus all legacy code for non DT boards
support (i.e. at91sam9g45.c and at91sam9g45_devices.c).
Use the Device Tree for running this board with newer kernels.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
[nicolas.ferre@atmel.com: Add sentence about DT, removed defconfig]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

6 files changed, 0 insertions, 3091 deletions

diff --git a/arch/arm/configs/at91sam9g45_defconfig b/arch/arm/configs/at91sam9g45_defconfig
deleted file mode 100644
index f66d1a1b64bf..000000000000
--- a/arch/arm/configs/at91sam9g45_defconfig
+++ /dev/null
@@ -1,175 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9G45=y
-CONFIG_MACH_AT91SAM9M10G45EK=y
-CONFIG_MACH_AT91SAM9_DT=y
-CONFIG_AT91_SLOW_CLOCK=y
-CONFIG_AEABI=y
-CONFIG_UACCESS_WITH_MEMCPY=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=128M console=ttyS0,115200 initrd=0x71100000,25165824 root=/dev/ram0 rw"
-CONFIG_AUTO_ZRELADDR=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-CONFIG_IPV6=y
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-CONFIG_IPV6_SIT_6RD=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_GLUEBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_SSC=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_MACB=y
-CONFIG_DAVICOM_PHY=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_JOYDEV=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_QT1070=y
-CONFIG_KEYBOARD_QT2160=y
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ATMEL_MXT=m
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_POWER_RESET=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91SAM9X_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_ATMEL=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_ATMEL_LCDC=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_BACKLIGHT_PWM=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SEQUENCER=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-CONFIG_SND_ATMEL_AC97C=y
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_USB is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_ACM=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ATMEL_USBA=y
-CONFIG_USB_G_MULTI=y
-CONFIG_USB_G_MULTI_CDC=y
-CONFIG_MMC=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
-CONFIG_MMC_ATMELMCI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_PWM=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_DMADEVICES=y
-CONFIG_AT_HDMAC=y
-CONFIG_DMATEST=m
-# CONFIG_IOMMU_SUPPORT is not set
-CONFIG_IIO=y
-CONFIG_AT91_ADC=y
-CONFIG_PWM=y
-CONFIG_PWM_ATMEL=y
-CONFIG_EXT4_FS=y
-CONFIG_FANOTIFY=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_USER_API_HASH=m
-CONFIG_CRYPTO_USER_API_SKCIPHER=m
-# CONFIG_CRYPTO_HW is not set
-CONFIG_FONTS=y
diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt
index 29a58206dcca..b86dd9923d58 100644
--- a/arch/arm/mach-at91/Kconfig.non_dt
+++ b/arch/arm/mach-at91/Kconfig.non_dt
@@ -39,12 +39,6 @@ config ARCH_AT91SAM9RL
 	select AT91_USE_OLD_CLK
 	select OLD_IRQ_AT91
 
-config ARCH_AT91SAM9G45
-	bool "AT91SAM9G45"
-	select SOC_AT91SAM9G45
-	select AT91_USE_OLD_CLK
-	select OLD_IRQ_AT91
-
 endchoice
 
 config ARCH_AT91SAM9G20
@@ -300,22 +294,6 @@ endif
 
 # ----------------------------------------------------------
 
-if ARCH_AT91SAM9G45
-
-comment "AT91SAM9G45 Board Type"
-
-config MACH_AT91SAM9M10G45EK
-	bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
-	help
-	  Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit.
-	  Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10
-	  families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
-	  <http://www.atmel.com/tools/SAM9M10-G45-EK.aspx>
-
-endif
-
-# ----------------------------------------------------------
-
 comment "AT91 Board Options"
 
 config MTD_AT91_DATAFLASH_CARD
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 009ad7b19485..37a35b048893 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -25,7 +25,6 @@ obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl_devices.o
-obj-$(CONFIG_ARCH_AT91SAM9G45)	+= at91sam9g45_devices.o
 
 # AT91RM9200 board-specific support
 obj-$(CONFIG_MACH_ONEARM)	+= board-1arm.o
@@ -71,9 +70,6 @@ obj-$(CONFIG_MACH_GSIA18S)	+= board-gsia18s.o board-stamp9g20.o
 # AT91SAM9260/AT91SAM9G20 board-specific support
 obj-$(CONFIG_MACH_SNAPPER_9260)	+= board-snapper9260.o
 
-# AT91SAM9G45 board-specific support
-obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o
-
 # AT91SAM board with device-tree
 obj-$(CONFIG_MACH_AT91RM9200_DT) += board-dt-rm9200.o
 obj-$(CONFIG_MACH_AT91SAM9_DT) += board-dt-sam9.o
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 405427ec05f8..dd03f652cca4 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -10,356 +10,12 @@
  *
  */
 
-#include <linux/module.h>
-#include <linux/dma-mapping.h>
-#include <linux/clk/at91_pmc.h>
-#include <linux/platform_device.h>
-
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
 #include <asm/system_misc.h>
-#include <mach/at91sam9g45.h>
 #include <mach/cpu.h>
 #include <mach/hardware.h>
 
-#include "at91_aic.h"
 #include "soc.h"
 #include "generic.h"
-#include "sam9_smc.h"
-#include "pm.h"
-
-#if defined(CONFIG_OLD_CLK_AT91)
-#include "clock.h"
-/* --------------------------------------------------------------------
- *  Clocks
- * -------------------------------------------------------------------- */
-
-/*
- * The peripheral clocks.
- */
-static struct clk pioA_clk = {
-	.name		= "pioA_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_PIOA,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioB_clk = {
-	.name		= "pioB_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_PIOB,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioC_clk = {
-	.name		= "pioC_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_PIOC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioDE_clk = {
-	.name		= "pioDE_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_PIODE,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk trng_clk = {
-	.name		= "trng_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_TRNG,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart0_clk = {
-	.name		= "usart0_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_US0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart1_clk = {
-	.name		= "usart1_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_US1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart2_clk = {
-	.name		= "usart2_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_US2,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart3_clk = {
-	.name		= "usart3_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_US3,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc0_clk = {
-	.name		= "mci0_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_MCI0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi0_clk = {
-	.name		= "twi0_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_TWI0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi1_clk = {
-	.name		= "twi1_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_TWI1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi0_clk = {
-	.name		= "spi0_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_SPI0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi1_clk = {
-	.name		= "spi1_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_SPI1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc0_clk = {
-	.name		= "ssc0_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_SSC0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc1_clk = {
-	.name		= "ssc1_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_SSC1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk tcb0_clk = {
-	.name		= "tcb0_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_TCB,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pwm_clk = {
-	.name		= "pwm_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_PWMC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk tsc_clk = {
-	.name		= "tsc_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_TSC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk dma_clk = {
-	.name		= "dma_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_DMA,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk uhphs_clk = {
-	.name		= "uhphs_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_UHPHS,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk lcdc_clk = {
-	.name		= "lcdc_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_LCDC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ac97_clk = {
-	.name		= "ac97_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_AC97C,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk macb_clk = {
-	.name		= "pclk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_EMAC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk isi_clk = {
-	.name		= "isi_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_ISI,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk udphs_clk = {
-	.name		= "udphs_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_UDPHS,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc1_clk = {
-	.name		= "mci1_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_MCI1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-
-/* Video decoder clock - Only for sam9m10/sam9m11 */
-static struct clk vdec_clk = {
-	.name		= "vdec_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_VDEC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-
-static struct clk adc_op_clk = {
-	.name		= "adc_op_clk",
-	.type		= CLK_TYPE_PERIPHERAL,
-	.rate_hz	= 300000,
-};
-
-/* AES/TDES/SHA clock - Only for sam9m11/sam9g56 */
-static struct clk aestdessha_clk = {
-	.name		= "aestdessha_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_AESTDESSHA,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-
-static struct clk *periph_clocks[] __initdata = {
-	&pioA_clk,
-	&pioB_clk,
-	&pioC_clk,
-	&pioDE_clk,
-	&trng_clk,
-	&usart0_clk,
-	&usart1_clk,
-	&usart2_clk,
-	&usart3_clk,
-	&mmc0_clk,
-	&twi0_clk,
-	&twi1_clk,
-	&spi0_clk,
-	&spi1_clk,
-	&ssc0_clk,
-	&ssc1_clk,
-	&tcb0_clk,
-	&pwm_clk,
-	&tsc_clk,
-	&dma_clk,
-	&uhphs_clk,
-	&lcdc_clk,
-	&ac97_clk,
-	&macb_clk,
-	&isi_clk,
-	&udphs_clk,
-	&mmc1_clk,
-	&adc_op_clk,
-	&aestdessha_clk,
-	// irq0
-};
-
-static struct clk_lookup periph_clocks_lookups[] = {
-	/* One additional fake clock for macb_hclk */
-	CLKDEV_CON_ID("hclk", &macb_clk),
-	/* One additional fake clock for ohci */
-	CLKDEV_CON_ID("ohci_clk", &uhphs_clk),
-	CLKDEV_CON_DEV_ID("hclk", "at91sam9g45-lcdfb.0", &lcdc_clk),
-	CLKDEV_CON_DEV_ID("hclk", "at91sam9g45es-lcdfb.0", &lcdc_clk),
-	CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci", &uhphs_clk),
-	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
-	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
-	CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk),
-	CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk),
-	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
-	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
-	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb0_clk),
-	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tcb0_clk),
-	CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.0", &twi0_clk),
-	CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.1", &twi1_clk),
-	CLKDEV_CON_DEV_ID("pclk", "at91sam9g45_ssc.0", &ssc0_clk),
-	CLKDEV_CON_DEV_ID("pclk", "at91sam9g45_ssc.1", &ssc1_clk),
-	CLKDEV_CON_DEV_ID("pclk", "fff9c000.ssc", &ssc0_clk),
-	CLKDEV_CON_DEV_ID("pclk", "fffa0000.ssc", &ssc1_clk),
-	CLKDEV_CON_DEV_ID(NULL, "atmel-trng", &trng_clk),
-	CLKDEV_CON_DEV_ID(NULL, "atmel_sha", &aestdessha_clk),
-	CLKDEV_CON_DEV_ID(NULL, "atmel_tdes", &aestdessha_clk),
-	CLKDEV_CON_DEV_ID(NULL, "atmel_aes", &aestdessha_clk),
-	CLKDEV_CON_DEV_ID(NULL, "at91sam9rl-pwm", &pwm_clk),
-	/* more usart lookup table for DT entries */
-	CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck),
-	CLKDEV_CON_DEV_ID("usart", "fff8c000.serial", &usart0_clk),
-	CLKDEV_CON_DEV_ID("usart", "fff90000.serial", &usart1_clk),
-	CLKDEV_CON_DEV_ID("usart", "fff94000.serial", &usart2_clk),
-	CLKDEV_CON_DEV_ID("usart", "fff98000.serial", &usart3_clk),
-	/* more tc lookup table for DT entries */
-	CLKDEV_CON_DEV_ID("t0_clk", "fff7c000.timer", &tcb0_clk),
-	CLKDEV_CON_DEV_ID("t0_clk", "fffd4000.timer", &tcb0_clk),
-	CLKDEV_CON_DEV_ID("hclk", "700000.ohci", &uhphs_clk),
-	CLKDEV_CON_DEV_ID("ehci_clk", "800000.ehci", &uhphs_clk),
-	CLKDEV_CON_DEV_ID("mci_clk", "fff80000.mmc", &mmc0_clk),
-	CLKDEV_CON_DEV_ID("mci_clk", "fffd0000.mmc", &mmc1_clk),
-	CLKDEV_CON_DEV_ID(NULL, "fff84000.i2c", &twi0_clk),
-	CLKDEV_CON_DEV_ID(NULL, "fff88000.i2c", &twi1_clk),
-	CLKDEV_CON_DEV_ID("spi_clk", "fffa4000.spi", &spi0_clk),
-	CLKDEV_CON_DEV_ID("spi_clk", "fffa8000.spi", &spi1_clk),
-	CLKDEV_CON_DEV_ID("hclk", "600000.gadget", &utmi_clk),
-	CLKDEV_CON_DEV_ID("pclk", "600000.gadget", &udphs_clk),
-	/* fake hclk clock */
-	CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk),
-	CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk),
-	CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioB_clk),
-	CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioC_clk),
-	CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioDE_clk),
-	CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioDE_clk),
-
-	CLKDEV_CON_ID("pioA", &pioA_clk),
-	CLKDEV_CON_ID("pioB", &pioB_clk),
-	CLKDEV_CON_ID("pioC", &pioC_clk),
-	CLKDEV_CON_ID("pioD", &pioDE_clk),
-	CLKDEV_CON_ID("pioE", &pioDE_clk),
-	/* Fake adc clock */
-	CLKDEV_CON_ID("adc_clk", &tsc_clk),
-	CLKDEV_CON_DEV_ID(NULL, "fffb8000.pwm", &pwm_clk),
-};
-
-static struct clk_lookup usart_clocks_lookups[] = {
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk),
-};
-
-/*
- * The two programmable clocks.
- * You must configure pin multiplexing to bring these signals out.
- */
-static struct clk pck0 = {
-	.name		= "pck0",
-	.pmc_mask	= AT91_PMC_PCK0,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 0,
-};
-static struct clk pck1 = {
-	.name		= "pck1",
-	.pmc_mask	= AT91_PMC_PCK1,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 1,
-};
-
-static void __init at91sam9g45_register_clocks(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
-		clk_register(periph_clocks[i]);
-
-	clkdev_add_table(periph_clocks_lookups,
-			 ARRAY_SIZE(periph_clocks_lookups));
-	clkdev_add_table(usart_clocks_lookups,
-			 ARRAY_SIZE(usart_clocks_lookups));
-
-	if (cpu_is_at91sam9m10() || cpu_is_at91sam9m11())
-		clk_register(&vdec_clk);
-
-	clk_register(&pck0);
-	clk_register(&pck1);
-}
-#else
-#define at91sam9g45_register_clocks NULL
-#endif
-
-/* --------------------------------------------------------------------
- *  GPIO
- * -------------------------------------------------------------------- */
-
-static struct at91_gpio_bank at91sam9g45_gpio[] __initdata = {
-	{
-		.id		= AT91SAM9G45_ID_PIOA,
-		.regbase	= AT91SAM9G45_BASE_PIOA,
-	}, {
-		.id		= AT91SAM9G45_ID_PIOB,
-		.regbase	= AT91SAM9G45_BASE_PIOB,
-	}, {
-		.id		= AT91SAM9G45_ID_PIOC,
-		.regbase	= AT91SAM9G45_BASE_PIOC,
-	}, {
-		.id		= AT91SAM9G45_ID_PIODE,
-		.regbase	= AT91SAM9G45_BASE_PIOD,
-	}, {
-		.id		= AT91SAM9G45_ID_PIODE,
-		.regbase	= AT91SAM9G45_BASE_PIOE,
-	}
-};
 
 /* --------------------------------------------------------------------
  *  AT91SAM9G45 processor initialization
@@ -370,113 +26,14 @@ static void __init at91sam9g45_map_io(void)
 	at91_init_sram(0, AT91SAM9G45_SRAM_BASE, AT91SAM9G45_SRAM_SIZE);
 }
 
-static void __init at91sam9g45_ioremap_registers(void)
-{
-	at91_ioremap_ramc(0, AT91SAM9G45_BASE_DDRSDRC1, 512);
-	at91_ioremap_ramc(1, AT91SAM9G45_BASE_DDRSDRC0, 512);
-	at91sam926x_ioremap_pit(AT91SAM9G45_BASE_PIT);
-	at91sam9_ioremap_smc(0, AT91SAM9G45_BASE_SMC);
-	at91_ioremap_matrix(AT91SAM9G45_BASE_MATRIX);
-	at91_pm_set_standby(at91_ddr_standby);
-}
-
 static void __init at91sam9g45_initialize(void)
 {
 	arm_pm_idle = at91sam9_idle;
 
 	at91_sysirq_mask_rtc(AT91SAM9G45_BASE_RTC);
 	at91_sysirq_mask_rtt(AT91SAM9G45_BASE_RTT);
-
-	/* Register GPIO subsystem */
-	at91_gpio_init(at91sam9g45_gpio, 5);
-}
-
-static struct resource rstc_resources[] = {
-	[0] = {
-		.start  = AT91SAM9G45_BASE_RSTC,
-		.end    = AT91SAM9G45_BASE_RSTC + SZ_16 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = AT91SAM9G45_BASE_DDRSDRC1,
-		.end    = AT91SAM9G45_BASE_DDRSDRC1 + SZ_512 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	[2] = {
-		.start  = AT91SAM9G45_BASE_DDRSDRC0,
-		.end    = AT91SAM9G45_BASE_DDRSDRC0 + SZ_512 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device rstc_device = {
-	.name           = "at91-sam9g45-reset",
-	.resource       = rstc_resources,
-	.num_resources  = ARRAY_SIZE(rstc_resources),
-};
-
-static struct resource shdwc_resources[] = {
-	[0] = {
-		.start  = AT91SAM9G45_BASE_SHDWC,
-		.end    = AT91SAM9G45_BASE_SHDWC + SZ_16 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device shdwc_device = {
-	.name           = "at91-poweroff",
-	.resource       = shdwc_resources,
-	.num_resources  = ARRAY_SIZE(shdwc_resources),
-};
-
-static void __init at91sam9g45_register_devices(void)
-{
-	platform_device_register(&rstc_device);
-	platform_device_register(&shdwc_device);
 }
 
-/* --------------------------------------------------------------------
- *  Interrupt initialization
- * -------------------------------------------------------------------- */
-
-/*
- * The default interrupt priority levels (0 = lowest, 7 = highest).
- */
-static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = {
-	7,	/* Advanced Interrupt Controller (FIQ) */
-	7,	/* System Peripherals */
-	1,	/* Parallel IO Controller A */
-	1,	/* Parallel IO Controller B */
-	1,	/* Parallel IO Controller C */
-	1,	/* Parallel IO Controller D and E */
-	0,
-	5,	/* USART 0 */
-	5,	/* USART 1 */
-	5,	/* USART 2 */
-	5,	/* USART 3 */
-	0,	/* Multimedia Card Interface 0 */
-	6,	/* Two-Wire Interface 0 */
-	6,	/* Two-Wire Interface 1 */
-	5,	/* Serial Peripheral Interface 0 */
-	5,	/* Serial Peripheral Interface 1 */
-	4,	/* Serial Synchronous Controller 0 */
-	4,	/* Serial Synchronous Controller 1 */
-	0,	/* Timer Counter 0, 1, 2, 3, 4 and 5 */
-	0,	/* Pulse Width Modulation Controller */
-	0,	/* Touch Screen Controller */
-	0,	/* DMA Controller */
-	2,	/* USB Host High Speed port */
-	3,	/* LDC Controller */
-	5,	/* AC97 Controller */
-	3,	/* Ethernet */
-	0,	/* Image Sensor Interface */
-	2,	/* USB Device High speed port */
-	0,	/* AESTDESSHA Crypto HW Accelerators */
-	0,	/* Multimedia Card Interface 1 */
-	0,
-	0,	/* Advanced Interrupt Controller (IRQ0) */
-};
-
 static void __init at91sam9g45_init_time(void)
 {
 	at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS);
@@ -484,11 +41,6 @@ static void __init at91sam9g45_init_time(void)
 
 AT91_SOC_START(at91sam9g45)
 	.map_io = at91sam9g45_map_io,
-	.default_irq_priority = at91sam9g45_default_irq_priority,
-	.extern_irq = (1 << AT91SAM9G45_ID_IRQ0),
-	.ioremap_registers = at91sam9g45_ioremap_registers,
-	.register_clocks = at91sam9g45_register_clocks,
-	.register_devices = at91sam9g45_register_devices,
 	.init = at91sam9g45_initialize,
 	.init_time = at91sam9g45_init_time,
 AT91_SOC_END
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
deleted file mode 100644
index 21ab782cc8e9..000000000000
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ /dev/null
@@ -1,1915 +0,0 @@
-/*
- *  On-Chip devices setup code for the AT91SAM9G45 family
- *
- *  Copyright (C) 2009 Atmel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/i2c-gpio.h>
-#include <linux/atmel-mci.h>
-#include <linux/platform_data/crypto-atmel.h>
-
-#include <linux/platform_data/at91_adc.h>
-
-#include <linux/fb.h>
-#include <video/atmel_lcdc.h>
-
-#include <mach/at91sam9g45.h>
-#include <mach/at91sam9g45_matrix.h>
-#include <mach/at91_matrix.h>
-#include <mach/at91sam9_smc.h>
-#include <linux/platform_data/dma-atmel.h>
-#include <mach/atmel-mci.h>
-#include <mach/hardware.h>
-
-#include <media/atmel-isi.h>
-
-#include "board.h"
-#include "generic.h"
-#include "clock.h"
-#include "gpio.h"
-
-
-/* --------------------------------------------------------------------
- *  HDMAC - AHB DMA Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
-static u64 hdmac_dmamask = DMA_BIT_MASK(32);
-
-static struct resource hdmac_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_DMA,
-		.end	= AT91SAM9G45_BASE_DMA + SZ_512 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_DMA,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_DMA,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at_hdmac_device = {
-	.name		= "at91sam9g45_dma",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &hdmac_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= hdmac_resources,
-	.num_resources	= ARRAY_SIZE(hdmac_resources),
-};
-
-void __init at91_add_device_hdmac(void)
-{
-	platform_device_register(&at_hdmac_device);
-}
-#else
-void __init at91_add_device_hdmac(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  USB Host (OHCI)
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static u64 ohci_dmamask = DMA_BIT_MASK(32);
-static struct at91_usbh_data usbh_ohci_data;
-
-static struct resource usbh_ohci_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_OHCI_BASE,
-		.end	= AT91SAM9G45_OHCI_BASE + SZ_1M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91_usbh_ohci_device = {
-	.name		= "at91_ohci",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &ohci_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &usbh_ohci_data,
-	},
-	.resource	= usbh_ohci_resources,
-	.num_resources	= ARRAY_SIZE(usbh_ohci_resources),
-};
-
-void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data)
-{
-	int i;
-
-	if (!data)
-		return;
-
-	/* Enable VBus control for UHP ports */
-	for (i = 0; i < data->ports; i++) {
-		if (gpio_is_valid(data->vbus_pin[i]))
-			at91_set_gpio_output(data->vbus_pin[i],
-					     data->vbus_pin_active_low[i]);
-	}
-
-	/* Enable overcurrent notification */
-	for (i = 0; i < data->ports; i++) {
-		if (gpio_is_valid(data->overcurrent_pin[i]))
-			at91_set_gpio_input(data->overcurrent_pin[i], 1);
-	}
-
-	usbh_ohci_data = *data;
-	platform_device_register(&at91_usbh_ohci_device);
-}
-#else
-void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  USB Host HS (EHCI)
- *  Needs an OHCI host for low and full speed management
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE)
-static u64 ehci_dmamask = DMA_BIT_MASK(32);
-static struct at91_usbh_data usbh_ehci_data;
-
-static struct resource usbh_ehci_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_EHCI_BASE,
-		.end	= AT91SAM9G45_EHCI_BASE + SZ_1M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91_usbh_ehci_device = {
-	.name		= "atmel-ehci",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &ehci_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &usbh_ehci_data,
-	},
-	.resource	= usbh_ehci_resources,
-	.num_resources	= ARRAY_SIZE(usbh_ehci_resources),
-};
-
-void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data)
-{
-	int i;
-
-	if (!data)
-		return;
-
-	/* Enable VBus control for UHP ports */
-	for (i = 0; i < data->ports; i++) {
-		if (gpio_is_valid(data->vbus_pin[i]))
-			at91_set_gpio_output(data->vbus_pin[i],
-					     data->vbus_pin_active_low[i]);
-	}
-
-	usbh_ehci_data = *data;
-	platform_device_register(&at91_usbh_ehci_device);
-}
-#else
-void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  USB HS Device (Gadget)
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
-static struct resource usba_udc_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_UDPHS_FIFO,
-		.end	= AT91SAM9G45_UDPHS_FIFO + SZ_512K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9G45_BASE_UDPHS,
-		.end	= AT91SAM9G45_BASE_UDPHS + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_UDPHS,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_UDPHS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-#define EP(nam, idx, maxpkt, maxbk, dma, isoc)			\
-	[idx] = {						\
-		.name		= nam,				\
-		.index		= idx,				\
-		.fifo_size	= maxpkt,			\
-		.nr_banks	= maxbk,			\
-		.can_dma	= dma,				\
-		.can_isoc	= isoc,				\
-	}
-
-static struct usba_ep_data usba_udc_ep[] __initdata = {
-	EP("ep0", 0, 64, 1, 0, 0),
-	EP("ep1", 1, 1024, 2, 1, 1),
-	EP("ep2", 2, 1024, 2, 1, 1),
-	EP("ep3", 3, 1024, 3, 1, 0),
-	EP("ep4", 4, 1024, 3, 1, 0),
-	EP("ep5", 5, 1024, 3, 1, 1),
-	EP("ep6", 6, 1024, 3, 1, 1),
-};
-
-#undef EP
-
-/*
- * pdata doesn't have room for any endpoints, so we need to
- * append room for the ones we need right after it.
- */
-static struct {
-	struct usba_platform_data pdata;
-	struct usba_ep_data ep[7];
-} usba_udc_data;
-
-static struct platform_device at91_usba_udc_device = {
-	.name		= "atmel_usba_udc",
-	.id		= -1,
-	.dev		= {
-				.platform_data	= &usba_udc_data.pdata,
-	},
-	.resource	= usba_udc_resources,
-	.num_resources	= ARRAY_SIZE(usba_udc_resources),
-};
-
-void __init at91_add_device_usba(struct usba_platform_data *data)
-{
-	usba_udc_data.pdata.vbus_pin = -EINVAL;
-	usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
-	memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));
-
-	if (data && gpio_is_valid(data->vbus_pin)) {
-		at91_set_gpio_input(data->vbus_pin, 0);
-		at91_set_deglitch(data->vbus_pin, 1);
-		usba_udc_data.pdata.vbus_pin = data->vbus_pin;
-	}
-
-	/* Pullup pin is handled internally by USB device peripheral */
-
-	platform_device_register(&at91_usba_udc_device);
-}
-#else
-void __init at91_add_device_usba(struct usba_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  Ethernet
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
-static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct macb_platform_data eth_data;
-
-static struct resource eth_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_EMAC,
-		.end	= AT91SAM9G45_BASE_EMAC + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_EMAC,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_EMAC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_eth_device = {
-	.name		= "macb",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &eth_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &eth_data,
-	},
-	.resource	= eth_resources,
-	.num_resources	= ARRAY_SIZE(eth_resources),
-};
-
-void __init at91_add_device_eth(struct macb_platform_data *data)
-{
-	if (!data)
-		return;
-
-	if (gpio_is_valid(data->phy_irq_pin)) {
-		at91_set_gpio_input(data->phy_irq_pin, 0);
-		at91_set_deglitch(data->phy_irq_pin, 1);
-	}
-
-	/* Pins used for MII and RMII */
-	at91_set_A_periph(AT91_PIN_PA17, 0);	/* ETXCK_EREFCK */
-	at91_set_A_periph(AT91_PIN_PA15, 0);	/* ERXDV */
-	at91_set_A_periph(AT91_PIN_PA12, 0);	/* ERX0 */
-	at91_set_A_periph(AT91_PIN_PA13, 0);	/* ERX1 */
-	at91_set_A_periph(AT91_PIN_PA16, 0);	/* ERXER */
-	at91_set_A_periph(AT91_PIN_PA14, 0);	/* ETXEN */
-	at91_set_A_periph(AT91_PIN_PA10, 0);	/* ETX0 */
-	at91_set_A_periph(AT91_PIN_PA11, 0);	/* ETX1 */
-	at91_set_A_periph(AT91_PIN_PA19, 0);	/* EMDIO */
-	at91_set_A_periph(AT91_PIN_PA18, 0);	/* EMDC */
-
-	if (!data->is_rmii) {
-		at91_set_B_periph(AT91_PIN_PA29, 0);	/* ECRS */
-		at91_set_B_periph(AT91_PIN_PA30, 0);	/* ECOL */
-		at91_set_B_periph(AT91_PIN_PA8,  0);	/* ERX2 */
-		at91_set_B_periph(AT91_PIN_PA9,  0);	/* ERX3 */
-		at91_set_B_periph(AT91_PIN_PA28, 0);	/* ERXCK */
-		at91_set_B_periph(AT91_PIN_PA6,  0);	/* ETX2 */
-		at91_set_B_periph(AT91_PIN_PA7,  0);	/* ETX3 */
-		at91_set_B_periph(AT91_PIN_PA27, 0);	/* ETXER */
-	}
-
-	eth_data = *data;
-	platform_device_register(&at91sam9g45_eth_device);
-}
-#else
-void __init at91_add_device_eth(struct macb_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  MMC / SD
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
-static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct mci_platform_data mmc0_data, mmc1_data;
-
-static struct resource mmc0_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_MCI0,
-		.end	= AT91SAM9G45_BASE_MCI0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI0,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_mmc0_device = {
-	.name		= "atmel_mci",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &mmc_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &mmc0_data,
-	},
-	.resource	= mmc0_resources,
-	.num_resources	= ARRAY_SIZE(mmc0_resources),
-};
-
-static struct resource mmc1_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_MCI1,
-		.end	= AT91SAM9G45_BASE_MCI1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI1,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_mmc1_device = {
-	.name		= "atmel_mci",
-	.id		= 1,
-	.dev		= {
-				.dma_mask		= &mmc_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &mmc1_data,
-	},
-	.resource	= mmc1_resources,
-	.num_resources	= ARRAY_SIZE(mmc1_resources),
-};
-
-/* Consider only one slot : slot 0 */
-void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
-{
-
-	if (!data)
-		return;
-
-	/* Must have at least one usable slot */
-	if (!data->slot[0].bus_width)
-		return;
-
-#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
-	{
-	struct at_dma_slave	*atslave;
-	struct mci_dma_data	*alt_atslave;
-
-	alt_atslave = kzalloc(sizeof(struct mci_dma_data), GFP_KERNEL);
-	atslave = &alt_atslave->sdata;
-
-	/* DMA slave channel configuration */
-	atslave->dma_dev = &at_hdmac_device.dev;
-	atslave->cfg = ATC_FIFOCFG_HALFFIFO
-			| ATC_SRC_H2SEL_HW | ATC_DST_H2SEL_HW;
-	if (mmc_id == 0)	/* MCI0 */
-		atslave->cfg |= ATC_SRC_PER(AT_DMA_ID_MCI0)
-			      | ATC_DST_PER(AT_DMA_ID_MCI0);
-
-	else			/* MCI1 */
-		atslave->cfg |= ATC_SRC_PER(AT_DMA_ID_MCI1)
-			      | ATC_DST_PER(AT_DMA_ID_MCI1);
-
-	data->dma_slave = alt_atslave;
-	}
-#endif
-
-
-	/* input/irq */
-	if (gpio_is_valid(data->slot[0].detect_pin)) {
-		at91_set_gpio_input(data->slot[0].detect_pin, 1);
-		at91_set_deglitch(data->slot[0].detect_pin, 1);
-	}
-	if (gpio_is_valid(data->slot[0].wp_pin))
-		at91_set_gpio_input(data->slot[0].wp_pin, 1);
-
-	if (mmc_id == 0) {		/* MCI0 */
-
-		/* CLK */
-		at91_set_A_periph(AT91_PIN_PA0, 0);
-
-		/* CMD */
-		at91_set_A_periph(AT91_PIN_PA1, 1);
-
-		/* DAT0, maybe DAT1..DAT3 and maybe DAT4..DAT7 */
-		at91_set_A_periph(AT91_PIN_PA2, 1);
-		if (data->slot[0].bus_width == 4) {
-			at91_set_A_periph(AT91_PIN_PA3, 1);
-			at91_set_A_periph(AT91_PIN_PA4, 1);
-			at91_set_A_periph(AT91_PIN_PA5, 1);
-			if (data->slot[0].bus_width == 8) {
-				at91_set_A_periph(AT91_PIN_PA6, 1);
-				at91_set_A_periph(AT91_PIN_PA7, 1);
-				at91_set_A_periph(AT91_PIN_PA8, 1);
-				at91_set_A_periph(AT91_PIN_PA9, 1);
-			}
-		}
-
-		mmc0_data = *data;
-		platform_device_register(&at91sam9g45_mmc0_device);
-
-	} else {			/* MCI1 */
-
-		/* CLK */
-		at91_set_A_periph(AT91_PIN_PA31, 0);
-
-		/* CMD */
-		at91_set_A_periph(AT91_PIN_PA22, 1);
-
-		/* DAT0, maybe DAT1..DAT3 and maybe DAT4..DAT7 */
-		at91_set_A_periph(AT91_PIN_PA23, 1);
-		if (data->slot[0].bus_width == 4) {
-			at91_set_A_periph(AT91_PIN_PA24, 1);
-			at91_set_A_periph(AT91_PIN_PA25, 1);
-			at91_set_A_periph(AT91_PIN_PA26, 1);
-			if (data->slot[0].bus_width == 8) {
-				at91_set_A_periph(AT91_PIN_PA27, 1);
-				at91_set_A_periph(AT91_PIN_PA28, 1);
-				at91_set_A_periph(AT91_PIN_PA29, 1);
-				at91_set_A_periph(AT91_PIN_PA30, 1);
-			}
-		}
-
-		mmc1_data = *data;
-		platform_device_register(&at91sam9g45_mmc1_device);
-
-	}
-}
-#else
-void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  NAND / SmartMedia
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
-static struct atmel_nand_data nand_data;
-
-#define NAND_BASE	AT91_CHIPSELECT_3
-
-static struct resource nand_resources[] = {
-	[0] = {
-		.start	= NAND_BASE,
-		.end	= NAND_BASE + SZ_256M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9G45_BASE_ECC,
-		.end	= AT91SAM9G45_BASE_ECC + SZ_512 - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device at91sam9g45_nand_device = {
-	.name		= "atmel_nand",
-	.id		= -1,
-	.dev		= {
-				.platform_data	= &nand_data,
-	},
-	.resource	= nand_resources,
-	.num_resources	= ARRAY_SIZE(nand_resources),
-};
-
-void __init at91_add_device_nand(struct atmel_nand_data *data)
-{
-	unsigned long csa;
-
-	if (!data)
-		return;
-
-	csa = at91_matrix_read(AT91_MATRIX_EBICSA);
-	at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
-
-	/* enable pin */
-	if (gpio_is_valid(data->enable_pin))
-		at91_set_gpio_output(data->enable_pin, 1);
-
-	/* ready/busy pin */
-	if (gpio_is_valid(data->rdy_pin))
-		at91_set_gpio_input(data->rdy_pin, 1);
-
-	/* card detect pin */
-	if (gpio_is_valid(data->det_pin))
-		at91_set_gpio_input(data->det_pin, 1);
-
-	nand_data = *data;
-	platform_device_register(&at91sam9g45_nand_device);
-}
-#else
-void __init at91_add_device_nand(struct atmel_nand_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  TWI (i2c)
- * -------------------------------------------------------------------- */
-
-/*
- * Prefer the GPIO code since the TWI controller isn't robust
- * (gets overruns and underruns under load) and can only issue
- * repeated STARTs in one scenario (the driver doesn't yet handle them).
- */
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
-static struct i2c_gpio_platform_data pdata_i2c0 = {
-	.sda_pin		= AT91_PIN_PA20,
-	.sda_is_open_drain	= 1,
-	.scl_pin		= AT91_PIN_PA21,
-	.scl_is_open_drain	= 1,
-	.udelay			= 5,		/* ~100 kHz */
-};
-
-static struct platform_device at91sam9g45_twi0_device = {
-	.name			= "i2c-gpio",
-	.id			= 0,
-	.dev.platform_data	= &pdata_i2c0,
-};
-
-static struct i2c_gpio_platform_data pdata_i2c1 = {
-	.sda_pin		= AT91_PIN_PB10,
-	.sda_is_open_drain	= 1,
-	.scl_pin		= AT91_PIN_PB11,
-	.scl_is_open_drain	= 1,
-	.udelay			= 5,		/* ~100 kHz */
-};
-
-static struct platform_device at91sam9g45_twi1_device = {
-	.name			= "i2c-gpio",
-	.id			= 1,
-	.dev.platform_data	= &pdata_i2c1,
-};
-
-void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
-{
-	i2c_register_board_info(i2c_id, devices, nr_devices);
-
-	if (i2c_id == 0) {
-		at91_set_GPIO_periph(AT91_PIN_PA20, 1);		/* TWD (SDA) */
-		at91_set_multi_drive(AT91_PIN_PA20, 1);
-
-		at91_set_GPIO_periph(AT91_PIN_PA21, 1);		/* TWCK (SCL) */
-		at91_set_multi_drive(AT91_PIN_PA21, 1);
-
-		platform_device_register(&at91sam9g45_twi0_device);
-	} else {
-		at91_set_GPIO_periph(AT91_PIN_PB10, 1);		/* TWD (SDA) */
-		at91_set_multi_drive(AT91_PIN_PB10, 1);
-
-		at91_set_GPIO_periph(AT91_PIN_PB11, 1);		/* TWCK (SCL) */
-		at91_set_multi_drive(AT91_PIN_PB11, 1);
-
-		platform_device_register(&at91sam9g45_twi1_device);
-	}
-}
-
-#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-static struct resource twi0_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_TWI0,
-		.end	= AT91SAM9G45_BASE_TWI0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI0,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_twi0_device = {
-	.name		= "i2c-at91sam9g10",
-	.id		= 0,
-	.resource	= twi0_resources,
-	.num_resources	= ARRAY_SIZE(twi0_resources),
-};
-
-static struct resource twi1_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_TWI1,
-		.end	= AT91SAM9G45_BASE_TWI1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI1,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_twi1_device = {
-	.name		= "i2c-at91sam9g10",
-	.id		= 1,
-	.resource	= twi1_resources,
-	.num_resources	= ARRAY_SIZE(twi1_resources),
-};
-
-void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
-{
-	i2c_register_board_info(i2c_id, devices, nr_devices);
-
-	/* pins used for TWI interface */
-	if (i2c_id == 0) {
-		at91_set_A_periph(AT91_PIN_PA20, 0);		/* TWD */
-		at91_set_A_periph(AT91_PIN_PA21, 0);		/* TWCK */
-
-		platform_device_register(&at91sam9g45_twi0_device);
-	} else {
-		at91_set_A_periph(AT91_PIN_PB10, 0);		/* TWD */
-		at91_set_A_periph(AT91_PIN_PB11, 0);		/* TWCK */
-
-		platform_device_register(&at91sam9g45_twi1_device);
-	}
-}
-#else
-void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  SPI
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-static struct resource spi0_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_SPI0,
-		.end	= AT91SAM9G45_BASE_SPI0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI0,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_spi0_device = {
-	.name		= "atmel_spi",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &spi_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= spi0_resources,
-	.num_resources	= ARRAY_SIZE(spi0_resources),
-};
-
-static const unsigned spi0_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PB18, AT91_PIN_PB19, AT91_PIN_PD27 };
-
-static struct resource spi1_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_SPI1,
-		.end	= AT91SAM9G45_BASE_SPI1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI1,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_spi1_device = {
-	.name		= "atmel_spi",
-	.id		= 1,
-	.dev		= {
-				.dma_mask		= &spi_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= spi1_resources,
-	.num_resources	= ARRAY_SIZE(spi1_resources),
-};
-
-static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB17, AT91_PIN_PD28, AT91_PIN_PD18, AT91_PIN_PD19 };
-
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
-{
-	int i;
-	unsigned long cs_pin;
-	short enable_spi0 = 0;
-	short enable_spi1 = 0;
-
-	/* Choose SPI chip-selects */
-	for (i = 0; i < nr_devices; i++) {
-		if (devices[i].controller_data)
-			cs_pin = (unsigned long) devices[i].controller_data;
-		else if (devices[i].bus_num == 0)
-			cs_pin = spi0_standard_cs[devices[i].chip_select];
-		else
-			cs_pin = spi1_standard_cs[devices[i].chip_select];
-
-		if (!gpio_is_valid(cs_pin))
-			continue;
-
-		if (devices[i].bus_num == 0)
-			enable_spi0 = 1;
-		else
-			enable_spi1 = 1;
-
-		/* enable chip-select pin */
-		at91_set_gpio_output(cs_pin, 1);
-
-		/* pass chip-select pin to driver */
-		devices[i].controller_data = (void *) cs_pin;
-	}
-
-	spi_register_board_info(devices, nr_devices);
-
-	/* Configure SPI bus(es) */
-	if (enable_spi0) {
-		at91_set_A_periph(AT91_PIN_PB0, 0);	/* SPI0_MISO */
-		at91_set_A_periph(AT91_PIN_PB1, 0);	/* SPI0_MOSI */
-		at91_set_A_periph(AT91_PIN_PB2, 0);	/* SPI0_SPCK */
-
-		platform_device_register(&at91sam9g45_spi0_device);
-	}
-	if (enable_spi1) {
-		at91_set_A_periph(AT91_PIN_PB14, 0);	/* SPI1_MISO */
-		at91_set_A_periph(AT91_PIN_PB15, 0);	/* SPI1_MOSI */
-		at91_set_A_periph(AT91_PIN_PB16, 0);	/* SPI1_SPCK */
-
-		platform_device_register(&at91sam9g45_spi1_device);
-	}
-}
-#else
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  AC97
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
-static u64 ac97_dmamask = DMA_BIT_MASK(32);
-static struct ac97c_platform_data ac97_data;
-
-static struct resource ac97_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_AC97C,
-		.end	= AT91SAM9G45_BASE_AC97C + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AC97C,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AC97C,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_ac97_device = {
-	.name		= "atmel_ac97c",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &ac97_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &ac97_data,
-	},
-	.resource	= ac97_resources,
-	.num_resources	= ARRAY_SIZE(ac97_resources),
-};
-
-void __init at91_add_device_ac97(struct ac97c_platform_data *data)
-{
-	if (!data)
-		return;
-
-	at91_set_A_periph(AT91_PIN_PD8, 0);	/* AC97FS */
-	at91_set_A_periph(AT91_PIN_PD9, 0);	/* AC97CK */
-	at91_set_A_periph(AT91_PIN_PD7, 0);	/* AC97TX */
-	at91_set_A_periph(AT91_PIN_PD6, 0);	/* AC97RX */
-
-	/* reset */
-	if (gpio_is_valid(data->reset_pin))
-		at91_set_gpio_output(data->reset_pin, 0);
-
-	ac97_data = *data;
-	platform_device_register(&at91sam9g45_ac97_device);
-}
-#else
-void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
-#endif
-
-/* --------------------------------------------------------------------
- *  Image Sensor Interface
- * -------------------------------------------------------------------- */
-#if defined(CONFIG_VIDEO_ATMEL_ISI) || defined(CONFIG_VIDEO_ATMEL_ISI_MODULE)
-static u64 isi_dmamask = DMA_BIT_MASK(32);
-static struct isi_platform_data isi_data;
-
-struct resource isi_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_ISI,
-		.end	= AT91SAM9G45_BASE_ISI + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_ISI,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_ISI,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_isi_device = {
-	.name		= "atmel_isi",
-	.id		= 0,
-	.dev		= {
-			.dma_mask		= &isi_dmamask,
-			.coherent_dma_mask	= DMA_BIT_MASK(32),
-			.platform_data		= &isi_data,
-	},
-	.resource	= isi_resources,
-	.num_resources	= ARRAY_SIZE(isi_resources),
-};
-
-static struct clk_lookup isi_mck_lookups[] = {
-	CLKDEV_CON_DEV_ID("isi_mck", "atmel_isi.0", NULL),
-};
-
-void __init at91_add_device_isi(struct isi_platform_data *data,
-		bool use_pck_as_mck)
-{
-	struct clk *pck;
-	struct clk *parent;
-
-	if (!data)
-		return;
-	isi_data = *data;
-
-	at91_set_A_periph(AT91_PIN_PB20, 0);	/* ISI_D0 */
-	at91_set_A_periph(AT91_PIN_PB21, 0);	/* ISI_D1 */
-	at91_set_A_periph(AT91_PIN_PB22, 0);	/* ISI_D2 */
-	at91_set_A_periph(AT91_PIN_PB23, 0);	/* ISI_D3 */
-	at91_set_A_periph(AT91_PIN_PB24, 0);	/* ISI_D4 */
-	at91_set_A_periph(AT91_PIN_PB25, 0);	/* ISI_D5 */
-	at91_set_A_periph(AT91_PIN_PB26, 0);	/* ISI_D6 */
-	at91_set_A_periph(AT91_PIN_PB27, 0);	/* ISI_D7 */
-	at91_set_A_periph(AT91_PIN_PB28, 0);	/* ISI_PCK */
-	at91_set_A_periph(AT91_PIN_PB30, 0);	/* ISI_HSYNC */
-	at91_set_A_periph(AT91_PIN_PB29, 0);	/* ISI_VSYNC */
-	at91_set_B_periph(AT91_PIN_PB8, 0);	/* ISI_PD8 */
-	at91_set_B_periph(AT91_PIN_PB9, 0);	/* ISI_PD9 */
-	at91_set_B_periph(AT91_PIN_PB10, 0);	/* ISI_PD10 */
-	at91_set_B_periph(AT91_PIN_PB11, 0);	/* ISI_PD11 */
-
-	platform_device_register(&at91sam9g45_isi_device);
-
-	if (use_pck_as_mck) {
-		at91_set_B_periph(AT91_PIN_PB31, 0);	/* ISI_MCK (PCK1) */
-
-		pck = clk_get(NULL, "pck1");
-		parent = clk_get(NULL, "plla");
-
-		BUG_ON(IS_ERR(pck) || IS_ERR(parent));
-
-		if (clk_set_parent(pck, parent)) {
-			pr_err("Failed to set PCK's parent\n");
-		} else {
-			/* Register PCK as ISI_MCK */
-			isi_mck_lookups[0].clk = pck;
-			clkdev_add_table(isi_mck_lookups,
-					ARRAY_SIZE(isi_mck_lookups));
-		}
-
-		clk_put(pck);
-		clk_put(parent);
-	}
-}
-#else
-void __init at91_add_device_isi(struct isi_platform_data *data,
-		bool use_pck_as_mck) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  LCD Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static u64 lcdc_dmamask = DMA_BIT_MASK(32);
-static struct atmel_lcdfb_pdata lcdc_data;
-
-static struct resource lcdc_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_LCDC_BASE,
-		.end	= AT91SAM9G45_LCDC_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_LCDC,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_LCDC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91_lcdc_device = {
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &lcdc_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &lcdc_data,
-	},
-	.resource	= lcdc_resources,
-	.num_resources	= ARRAY_SIZE(lcdc_resources),
-};
-
-void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data)
-{
-	if (!data)
-		return;
-
-	if (cpu_is_at91sam9g45es())
-		at91_lcdc_device.name = "at91sam9g45es-lcdfb";
-	else
-		at91_lcdc_device.name = "at91sam9g45-lcdfb";
-
-	at91_set_A_periph(AT91_PIN_PE0, 0);	/* LCDDPWR */
-
-	at91_set_A_periph(AT91_PIN_PE2, 0);	/* LCDCC */
-	at91_set_A_periph(AT91_PIN_PE3, 0);	/* LCDVSYNC */
-	at91_set_A_periph(AT91_PIN_PE4, 0);	/* LCDHSYNC */
-	at91_set_A_periph(AT91_PIN_PE5, 0);	/* LCDDOTCK */
-	at91_set_A_periph(AT91_PIN_PE6, 0);	/* LCDDEN */
-	at91_set_A_periph(AT91_PIN_PE7, 0);	/* LCDD0 */
-	at91_set_A_periph(AT91_PIN_PE8, 0);	/* LCDD1 */
-	at91_set_A_periph(AT91_PIN_PE9, 0);	/* LCDD2 */
-	at91_set_A_periph(AT91_PIN_PE10, 0);	/* LCDD3 */
-	at91_set_A_periph(AT91_PIN_PE11, 0);	/* LCDD4 */
-	at91_set_A_periph(AT91_PIN_PE12, 0);	/* LCDD5 */
-	at91_set_A_periph(AT91_PIN_PE13, 0);	/* LCDD6 */
-	at91_set_A_periph(AT91_PIN_PE14, 0);	/* LCDD7 */
-	at91_set_A_periph(AT91_PIN_PE15, 0);	/* LCDD8 */
-	at91_set_A_periph(AT91_PIN_PE16, 0);	/* LCDD9 */
-	at91_set_A_periph(AT91_PIN_PE17, 0);	/* LCDD10 */
-	at91_set_A_periph(AT91_PIN_PE18, 0);	/* LCDD11 */
-	at91_set_A_periph(AT91_PIN_PE19, 0);	/* LCDD12 */
-	at91_set_A_periph(AT91_PIN_PE20, 0);	/* LCDD13 */
-	at91_set_A_periph(AT91_PIN_PE21, 0);	/* LCDD14 */
-	at91_set_A_periph(AT91_PIN_PE22, 0);	/* LCDD15 */
-	at91_set_A_periph(AT91_PIN_PE23, 0);	/* LCDD16 */
-	at91_set_A_periph(AT91_PIN_PE24, 0);	/* LCDD17 */
-	at91_set_A_periph(AT91_PIN_PE25, 0);	/* LCDD18 */
-	at91_set_A_periph(AT91_PIN_PE26, 0);	/* LCDD19 */
-	at91_set_A_periph(AT91_PIN_PE27, 0);	/* LCDD20 */
-	at91_set_A_periph(AT91_PIN_PE28, 0);	/* LCDD21 */
-	at91_set_A_periph(AT91_PIN_PE29, 0);	/* LCDD22 */
-	at91_set_A_periph(AT91_PIN_PE30, 0);	/* LCDD23 */
-
-	lcdc_data = *data;
-	platform_device_register(&at91_lcdc_device);
-}
-#else
-void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  Timer/Counter block
- * -------------------------------------------------------------------- */
-
-#ifdef CONFIG_ATMEL_TCLIB
-static struct resource tcb0_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_TCB0,
-		.end	= AT91SAM9G45_BASE_TCB0 + SZ_256 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_tcb0_device = {
-	.name		= "atmel_tcb",
-	.id		= 0,
-	.resource	= tcb0_resources,
-	.num_resources	= ARRAY_SIZE(tcb0_resources),
-};
-
-/* TCB1 begins with TC3 */
-static struct resource tcb1_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_TCB1,
-		.end	= AT91SAM9G45_BASE_TCB1 + SZ_256 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_tcb1_device = {
-	.name		= "atmel_tcb",
-	.id		= 1,
-	.resource	= tcb1_resources,
-	.num_resources	= ARRAY_SIZE(tcb1_resources),
-};
-
-static void __init at91_add_device_tc(void)
-{
-	platform_device_register(&at91sam9g45_tcb0_device);
-	platform_device_register(&at91sam9g45_tcb1_device);
-}
-#else
-static void __init at91_add_device_tc(void) { }
-#endif
-
-
-/* --------------------------------------------------------------------
- *  RTC
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
-static struct resource rtc_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_RTC,
-		.end	= AT91SAM9G45_BASE_RTC + SZ_256 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91_ID_SYS,
-		.end	= NR_IRQS_LEGACY + AT91_ID_SYS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_rtc_device = {
-	.name		= "at91_rtc",
-	.id		= -1,
-	.resource	= rtc_resources,
-	.num_resources	= ARRAY_SIZE(rtc_resources),
-};
-
-static void __init at91_add_device_rtc(void)
-{
-	platform_device_register(&at91sam9g45_rtc_device);
-}
-#else
-static void __init at91_add_device_rtc(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  ADC and touchscreen
- * -------------------------------------------------------------------- */
-
-#if IS_ENABLED(CONFIG_AT91_ADC)
-static struct at91_adc_data adc_data;
-
-static struct resource adc_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_TSC,
-		.end	= AT91SAM9G45_BASE_TSC + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device at91_adc_device = {
-	.name		= "at91sam9g45-adc",
-	.id		= -1,
-	.dev		= {
-				.platform_data	= &adc_data,
-	},
-	.resource	= adc_resources,
-	.num_resources	= ARRAY_SIZE(adc_resources),
-};
-
-static struct at91_adc_trigger at91_adc_triggers[] = {
-	[0] = {
-		.name = "external-rising",
-		.value = 1,
-		.is_external = true,
-	},
-	[1] = {
-		.name = "external-falling",
-		.value = 2,
-		.is_external = true,
-	},
-	[2] = {
-		.name = "external-any",
-		.value = 3,
-		.is_external = true,
-	},
-	[3] = {
-		.name = "continuous",
-		.value = 6,
-		.is_external = false,
-	},
-};
-
-void __init at91_add_device_adc(struct at91_adc_data *data)
-{
-	if (!data)
-		return;
-
-	if (test_bit(0, &data->channels_used))
-		at91_set_gpio_input(AT91_PIN_PD20, 0);
-	if (test_bit(1, &data->channels_used))
-		at91_set_gpio_input(AT91_PIN_PD21, 0);
-	if (test_bit(2, &data->channels_used))
-		at91_set_gpio_input(AT91_PIN_PD22, 0);
-	if (test_bit(3, &data->channels_used))
-		at91_set_gpio_input(AT91_PIN_PD23, 0);
-	if (test_bit(4, &data->channels_used))
-		at91_set_gpio_input(AT91_PIN_PD24, 0);
-	if (test_bit(5, &data->channels_used))
-		at91_set_gpio_input(AT91_PIN_PD25, 0);
-	if (test_bit(6, &data->channels_used))
-		at91_set_gpio_input(AT91_PIN_PD26, 0);
-	if (test_bit(7, &data->channels_used))
-		at91_set_gpio_input(AT91_PIN_PD27, 0);
-
-	if (data->use_external_triggers)
-		at91_set_A_periph(AT91_PIN_PD28, 0);
-
-	data->startup_time = 40;
-	data->trigger_number = 4;
-	data->trigger_list = at91_adc_triggers;
-
-	adc_data = *data;
-	platform_device_register(&at91_adc_device);
-}
-#else
-void __init at91_add_device_adc(struct at91_adc_data *data) {}
-#endif
-
-/* --------------------------------------------------------------------
- *  RTT
- * -------------------------------------------------------------------- */
-
-static struct resource rtt_resources[] = {
-	{
-		.start	= AT91SAM9G45_BASE_RTT,
-		.end	= AT91SAM9G45_BASE_RTT + SZ_16 - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.flags  = IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device at91sam9g45_rtt_device = {
-	.name		= "at91_rtt",
-	.id		= 0,
-	.resource	= rtt_resources,
-};
-
-#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9)
-static void __init at91_add_device_rtt_rtc(void)
-{
-	at91sam9g45_rtt_device.name = "rtc-at91sam9";
-	/*
-	 * The second resource is needed:
-	 * GPBR will serve as the storage for RTC time offset
-	 */
-	at91sam9g45_rtt_device.num_resources = 3;
-	rtt_resources[1].start = AT91SAM9G45_BASE_GPBR +
-				 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
-	rtt_resources[1].end = rtt_resources[1].start + 3;
-	rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
-	rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
-}
-#else
-static void __init at91_add_device_rtt_rtc(void)
-{
-	/* Only one resource is needed: RTT not used as RTC */
-	at91sam9g45_rtt_device.num_resources = 1;
-}
-#endif
-
-static void __init at91_add_device_rtt(void)
-{
-	at91_add_device_rtt_rtc();
-	platform_device_register(&at91sam9g45_rtt_device);
-}
-
-
-/* --------------------------------------------------------------------
- *  TRNG
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_HW_RANDOM_ATMEL) || defined(CONFIG_HW_RANDOM_ATMEL_MODULE)
-static struct resource trng_resources[] = {
-	{
-		.start	= AT91SAM9G45_BASE_TRNG,
-		.end	= AT91SAM9G45_BASE_TRNG + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device at91sam9g45_trng_device = {
-	.name		= "atmel-trng",
-	.id		= -1,
-	.resource	= trng_resources,
-	.num_resources	= ARRAY_SIZE(trng_resources),
-};
-
-static void __init at91_add_device_trng(void)
-{
-	platform_device_register(&at91sam9g45_trng_device);
-}
-#else
-static void __init at91_add_device_trng(void) {}
-#endif
-
-/* --------------------------------------------------------------------
- *  Watchdog
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
-static struct resource wdt_resources[] = {
-	{
-		.start	= AT91SAM9G45_BASE_WDT,
-		.end	= AT91SAM9G45_BASE_WDT + SZ_16 - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device at91sam9g45_wdt_device = {
-	.name		= "at91_wdt",
-	.id		= -1,
-	.resource	= wdt_resources,
-	.num_resources	= ARRAY_SIZE(wdt_resources),
-};
-
-static void __init at91_add_device_watchdog(void)
-{
-	platform_device_register(&at91sam9g45_wdt_device);
-}
-#else
-static void __init at91_add_device_watchdog(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  PWM
- * --------------------------------------------------------------------*/
-
-#if IS_ENABLED(CONFIG_PWM_ATMEL)
-static struct resource pwm_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_PWMC,
-		.end	= AT91SAM9G45_BASE_PWMC + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_PWMC,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_PWMC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_pwm0_device = {
-	.name	= "at91sam9rl-pwm",
-	.id	= -1,
-	.resource	= pwm_resources,
-	.num_resources	= ARRAY_SIZE(pwm_resources),
-};
-
-void __init at91_add_device_pwm(u32 mask)
-{
-	if (mask & (1 << AT91_PWM0))
-		at91_set_B_periph(AT91_PIN_PD24, 1);	/* enable PWM0 */
-
-	if (mask & (1 << AT91_PWM1))
-		at91_set_B_periph(AT91_PIN_PD31, 1);	/* enable PWM1 */
-
-	if (mask & (1 << AT91_PWM2))
-		at91_set_B_periph(AT91_PIN_PD26, 1);	/* enable PWM2 */
-
-	if (mask & (1 << AT91_PWM3))
-		at91_set_B_periph(AT91_PIN_PD0, 1);	/* enable PWM3 */
-
-	platform_device_register(&at91sam9g45_pwm0_device);
-}
-#else
-void __init at91_add_device_pwm(u32 mask) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  SSC -- Synchronous Serial Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
-static u64 ssc0_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc0_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_SSC0,
-		.end	= AT91SAM9G45_BASE_SSC0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC0,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_ssc0_device = {
-	.name	= "at91sam9g45_ssc",
-	.id	= 0,
-	.dev	= {
-		.dma_mask		= &ssc0_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= ssc0_resources,
-	.num_resources	= ARRAY_SIZE(ssc0_resources),
-};
-
-static inline void configure_ssc0_pins(unsigned pins)
-{
-	if (pins & ATMEL_SSC_TF)
-		at91_set_A_periph(AT91_PIN_PD1, 1);
-	if (pins & ATMEL_SSC_TK)
-		at91_set_A_periph(AT91_PIN_PD0, 1);
-	if (pins & ATMEL_SSC_TD)
-		at91_set_A_periph(AT91_PIN_PD2, 1);
-	if (pins & ATMEL_SSC_RD)
-		at91_set_A_periph(AT91_PIN_PD3, 1);
-	if (pins & ATMEL_SSC_RK)
-		at91_set_A_periph(AT91_PIN_PD4, 1);
-	if (pins & ATMEL_SSC_RF)
-		at91_set_A_periph(AT91_PIN_PD5, 1);
-}
-
-static u64 ssc1_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc1_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_SSC1,
-		.end	= AT91SAM9G45_BASE_SSC1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC1,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_ssc1_device = {
-	.name	= "at91sam9g45_ssc",
-	.id	= 1,
-	.dev	= {
-		.dma_mask		= &ssc1_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= ssc1_resources,
-	.num_resources	= ARRAY_SIZE(ssc1_resources),
-};
-
-static inline void configure_ssc1_pins(unsigned pins)
-{
-	if (pins & ATMEL_SSC_TF)
-		at91_set_A_periph(AT91_PIN_PD14, 1);
-	if (pins & ATMEL_SSC_TK)
-		at91_set_A_periph(AT91_PIN_PD12, 1);
-	if (pins & ATMEL_SSC_TD)
-		at91_set_A_periph(AT91_PIN_PD10, 1);
-	if (pins & ATMEL_SSC_RD)
-		at91_set_A_periph(AT91_PIN_PD11, 1);
-	if (pins & ATMEL_SSC_RK)
-		at91_set_A_periph(AT91_PIN_PD13, 1);
-	if (pins & ATMEL_SSC_RF)
-		at91_set_A_periph(AT91_PIN_PD15, 1);
-}
-
-/*
- * SSC controllers are accessed through library code, instead of any
- * kind of all-singing/all-dancing driver.  For example one could be
- * used by a particular I2S audio codec's driver, while another one
- * on the same system might be used by a custom data capture driver.
- */
-void __init at91_add_device_ssc(unsigned id, unsigned pins)
-{
-	struct platform_device *pdev;
-
-	/*
-	 * NOTE: caller is responsible for passing information matching
-	 * "pins" to whatever will be using each particular controller.
-	 */
-	switch (id) {
-	case AT91SAM9G45_ID_SSC0:
-		pdev = &at91sam9g45_ssc0_device;
-		configure_ssc0_pins(pins);
-		break;
-	case AT91SAM9G45_ID_SSC1:
-		pdev = &at91sam9g45_ssc1_device;
-		configure_ssc1_pins(pins);
-		break;
-	default:
-		return;
-	}
-
-	platform_device_register(pdev);
-}
-
-#else
-void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  UART
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SERIAL_ATMEL)
-static struct resource dbgu_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_DBGU,
-		.end	= AT91SAM9G45_BASE_DBGU + SZ_512 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91_ID_SYS,
-		.end	= NR_IRQS_LEGACY + AT91_ID_SYS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data dbgu_data = {
-	.use_dma_tx	= 0,
-	.use_dma_rx	= 0,
-};
-
-static u64 dbgu_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9g45_dbgu_device = {
-	.name		= "atmel_usart",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &dbgu_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &dbgu_data,
-	},
-	.resource	= dbgu_resources,
-	.num_resources	= ARRAY_SIZE(dbgu_resources),
-};
-
-static inline void configure_dbgu_pins(void)
-{
-	at91_set_A_periph(AT91_PIN_PB12, 0);		/* DRXD */
-	at91_set_A_periph(AT91_PIN_PB13, 1);		/* DTXD */
-}
-
-static struct resource uart0_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_US0,
-		.end	= AT91SAM9G45_BASE_US0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_US0,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_US0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart0_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart0_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9g45_uart0_device = {
-	.name		= "atmel_usart",
-	.id		= 1,
-	.dev		= {
-				.dma_mask		= &uart0_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart0_data,
-	},
-	.resource	= uart0_resources,
-	.num_resources	= ARRAY_SIZE(uart0_resources),
-};
-
-static inline void configure_usart0_pins(unsigned pins)
-{
-	at91_set_A_periph(AT91_PIN_PB19, 1);		/* TXD0 */
-	at91_set_A_periph(AT91_PIN_PB18, 0);		/* RXD0 */
-
-	if (pins & ATMEL_UART_RTS)
-		at91_set_B_periph(AT91_PIN_PB17, 0);	/* RTS0 */
-	if (pins & ATMEL_UART_CTS)
-		at91_set_B_periph(AT91_PIN_PB15, 0);	/* CTS0 */
-}
-
-static struct resource uart1_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_US1,
-		.end	= AT91SAM9G45_BASE_US1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_US1,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_US1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart1_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart1_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9g45_uart1_device = {
-	.name		= "atmel_usart",
-	.id		= 2,
-	.dev		= {
-				.dma_mask		= &uart1_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart1_data,
-	},
-	.resource	= uart1_resources,
-	.num_resources	= ARRAY_SIZE(uart1_resources),
-};
-
-static inline void configure_usart1_pins(unsigned pins)
-{
-	at91_set_A_periph(AT91_PIN_PB4, 1);		/* TXD1 */
-	at91_set_A_periph(AT91_PIN_PB5, 0);		/* RXD1 */
-
-	if (pins & ATMEL_UART_RTS)
-		at91_set_A_periph(AT91_PIN_PD16, 0);	/* RTS1 */
-	if (pins & ATMEL_UART_CTS)
-		at91_set_A_periph(AT91_PIN_PD17, 0);	/* CTS1 */
-}
-
-static struct resource uart2_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_US2,
-		.end	= AT91SAM9G45_BASE_US2 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_US2,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_US2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart2_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart2_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9g45_uart2_device = {
-	.name		= "atmel_usart",
-	.id		= 3,
-	.dev		= {
-				.dma_mask		= &uart2_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart2_data,
-	},
-	.resource	= uart2_resources,
-	.num_resources	= ARRAY_SIZE(uart2_resources),
-};
-
-static inline void configure_usart2_pins(unsigned pins)
-{
-	at91_set_A_periph(AT91_PIN_PB6, 1);		/* TXD2 */
-	at91_set_A_periph(AT91_PIN_PB7, 0);		/* RXD2 */
-
-	if (pins & ATMEL_UART_RTS)
-		at91_set_B_periph(AT91_PIN_PC9, 0);	/* RTS2 */
-	if (pins & ATMEL_UART_CTS)
-		at91_set_B_periph(AT91_PIN_PC11, 0);	/* CTS2 */
-}
-
-static struct resource uart3_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_US3,
-		.end	= AT91SAM9G45_BASE_US3 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_US3,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_US3,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart3_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart3_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9g45_uart3_device = {
-	.name		= "atmel_usart",
-	.id		= 4,
-	.dev		= {
-				.dma_mask		= &uart3_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart3_data,
-	},
-	.resource	= uart3_resources,
-	.num_resources	= ARRAY_SIZE(uart3_resources),
-};
-
-static inline void configure_usart3_pins(unsigned pins)
-{
-	at91_set_A_periph(AT91_PIN_PB8, 1);		/* TXD3 */
-	at91_set_A_periph(AT91_PIN_PB9, 0);		/* RXD3 */
-
-	if (pins & ATMEL_UART_RTS)
-		at91_set_B_periph(AT91_PIN_PA23, 0);	/* RTS3 */
-	if (pins & ATMEL_UART_CTS)
-		at91_set_B_periph(AT91_PIN_PA24, 0);	/* CTS3 */
-}
-
-static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
-
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
-{
-	struct platform_device *pdev;
-	struct atmel_uart_data *pdata;
-
-	switch (id) {
-		case 0:		/* DBGU */
-			pdev = &at91sam9g45_dbgu_device;
-			configure_dbgu_pins();
-			break;
-		case AT91SAM9G45_ID_US0:
-			pdev = &at91sam9g45_uart0_device;
-			configure_usart0_pins(pins);
-			break;
-		case AT91SAM9G45_ID_US1:
-			pdev = &at91sam9g45_uart1_device;
-			configure_usart1_pins(pins);
-			break;
-		case AT91SAM9G45_ID_US2:
-			pdev = &at91sam9g45_uart2_device;
-			configure_usart2_pins(pins);
-			break;
-		case AT91SAM9G45_ID_US3:
-			pdev = &at91sam9g45_uart3_device;
-			configure_usart3_pins(pins);
-			break;
-		default:
-			return;
-	}
-	pdata = pdev->dev.platform_data;
-	pdata->num = portnr;		/* update to mapped ID */
-
-	if (portnr < ATMEL_MAX_UART)
-		at91_uarts[portnr] = pdev;
-}
-
-void __init at91_add_device_serial(void)
-{
-	int i;
-
-	for (i = 0; i < ATMEL_MAX_UART; i++) {
-		if (at91_uarts[i])
-			platform_device_register(at91_uarts[i]);
-	}
-}
-#else
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_add_device_serial(void) {}
-#endif
-
-/* --------------------------------------------------------------------
- *  SHA1/SHA256
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_CRYPTO_DEV_ATMEL_SHA) || defined(CONFIG_CRYPTO_DEV_ATMEL_SHA_MODULE)
-static struct resource sha_resources[] = {
-	{
-		.start	= AT91SAM9G45_BASE_SHA,
-		.end	= AT91SAM9G45_BASE_SHA + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_sha_device = {
-	.name	= "atmel_sha",
-	.id		= -1,
-	.resource	= sha_resources,
-	.num_resources	= ARRAY_SIZE(sha_resources),
-};
-
-static void __init at91_add_device_sha(void)
-{
-	platform_device_register(&at91sam9g45_sha_device);
-}
-#else
-static void __init at91_add_device_sha(void) {}
-#endif
-
-/* --------------------------------------------------------------------
- *  DES/TDES
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_CRYPTO_DEV_ATMEL_TDES) || defined(CONFIG_CRYPTO_DEV_ATMEL_TDES_MODULE)
-static struct resource tdes_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_TDES,
-		.end	= AT91SAM9G45_BASE_TDES + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_tdes_device = {
-	.name	= "atmel_tdes",
-	.id		= -1,
-	.resource	= tdes_resources,
-	.num_resources	= ARRAY_SIZE(tdes_resources),
-};
-
-static void __init at91_add_device_tdes(void)
-{
-	platform_device_register(&at91sam9g45_tdes_device);
-}
-#else
-static void __init at91_add_device_tdes(void) {}
-#endif
-
-/* --------------------------------------------------------------------
- *  AES
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_CRYPTO_DEV_ATMEL_AES) || defined(CONFIG_CRYPTO_DEV_ATMEL_AES_MODULE)
-static struct crypto_platform_data aes_data;
-static struct crypto_dma_data alt_atslave;
-static u64 aes_dmamask = DMA_BIT_MASK(32);
-
-static struct resource aes_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_AES,
-		.end	= AT91SAM9G45_BASE_AES + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_aes_device = {
-	.name	= "atmel_aes",
-	.id		= -1,
-	.dev	= {
-		.dma_mask		= &aes_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= &aes_data,
-	},
-	.resource	= aes_resources,
-	.num_resources	= ARRAY_SIZE(aes_resources),
-};
-
-static void __init at91_add_device_aes(void)
-{
-	struct at_dma_slave	*atslave;
-
-	/* DMA TX slave channel configuration */
-	atslave = &alt_atslave.txdata;
-	atslave->dma_dev = &at_hdmac_device.dev;
-	atslave->cfg = ATC_FIFOCFG_ENOUGHSPACE	| ATC_SRC_H2SEL_HW |
-						ATC_SRC_PER(AT_DMA_ID_AES_RX);
-
-	/* DMA RX slave channel configuration */
-	atslave = &alt_atslave.rxdata;
-	atslave->dma_dev = &at_hdmac_device.dev;
-	atslave->cfg = ATC_FIFOCFG_ENOUGHSPACE	| ATC_DST_H2SEL_HW |
-						ATC_DST_PER(AT_DMA_ID_AES_TX);
-
-	aes_data.dma_slave = &alt_atslave;
-	platform_device_register(&at91sam9g45_aes_device);
-}
-#else
-static void __init at91_add_device_aes(void) {}
-#endif
-
-/* -------------------------------------------------------------------- */
-/*
- * These devices are always present and don't need any board-specific
- * setup.
- */
-static int __init at91_add_standard_devices(void)
-{
-	if (of_have_populated_dt())
-		return 0;
-
-	at91_add_device_hdmac();
-	at91_add_device_rtc();
-	at91_add_device_rtt();
-	at91_add_device_trng();
-	at91_add_device_watchdog();
-	at91_add_device_tc();
-	at91_add_device_sha();
-	at91_add_device_tdes();
-	at91_add_device_aes();
-	return 0;
-}
-
-arch_initcall(at91_add_standard_devices);
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
deleted file mode 100644
index a517c7f7af92..000000000000
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ /dev/null
@@ -1,527 +0,0 @@
-/*
- *  Board-specific setup code for the AT91SAM9M10G45 Evaluation Kit family
- *
- *  Covers: * AT91SAM9G45-EKES  board
- *          * AT91SAM9M10G45-EK board
- *
- *  Copyright (C) 2009 Atmel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/fb.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/leds.h>
-#include <linux/atmel-mci.h>
-#include <linux/delay.h>
-#include <linux/pwm.h>
-#include <linux/leds_pwm.h>
-
-#include <linux/platform_data/at91_adc.h>
-
-#include <mach/hardware.h>
-#include <video/atmel_lcdc.h>
-#include <media/soc_camera.h>
-#include <media/atmel-isi.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/at91sam9_smc.h>
-#include <mach/system_rev.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "sam9_smc.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init ek_init_early(void)
-{
-	/* Initialize processor: 12.000 MHz crystal */
-	at91_initialize(12000000);
-}
-
-/*
- * USB HS Host port (common to OHCI & EHCI)
- */
-static struct at91_usbh_data __initdata ek_usbh_hs_data = {
-	.ports		= 2,
-	.vbus_pin	= {AT91_PIN_PD1, AT91_PIN_PD3},
-	.vbus_pin_active_low = {1, 1},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-
-/*
- * USB HS Device port
- */
-static struct usba_platform_data __initdata ek_usba_udc_data = {
-	.vbus_pin	= AT91_PIN_PB19,
-};
-
-
-/*
- * SPI devices.
- */
-static struct spi_board_info ek_spi_devices[] = {
-	{	/* DataFlash chip */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 0,
-		.max_speed_hz	= 15 * 1000 * 1000,
-		.bus_num	= 0,
-	},
-};
-
-
-/*
- * MCI (SD/MMC)
- */
-static struct mci_platform_data __initdata mci0_data = {
-	.slot[0] = {
-		.bus_width	= 4,
-		.detect_pin	= AT91_PIN_PD10,
-		.wp_pin		= -EINVAL,
-	},
-};
-
-static struct mci_platform_data __initdata mci1_data = {
-	.slot[0] = {
-		.bus_width	= 4,
-		.detect_pin	= AT91_PIN_PD11,
-		.wp_pin		= AT91_PIN_PD29,
-	},
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata ek_macb_data = {
-	.phy_irq_pin	= AT91_PIN_PD5,
-	.is_rmii	= 1,
-};
-
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata ek_nand_partition[] = {
-	{
-		.name	= "Partition 1",
-		.offset	= 0,
-		.size	= SZ_64M,
-	},
-	{
-		.name	= "Partition 2",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-/* det_pin is not connected */
-static struct atmel_nand_data __initdata ek_nand_data = {
-	.ale		= 21,
-	.cle		= 22,
-	.rdy_pin	= AT91_PIN_PC8,
-	.enable_pin	= AT91_PIN_PC14,
-	.det_pin	= -EINVAL,
-	.ecc_mode	= NAND_ECC_SOFT,
-	.on_flash_bbt	= 1,
-	.parts		= ek_nand_partition,
-	.num_parts	= ARRAY_SIZE(ek_nand_partition),
-};
-
-static struct sam9_smc_config __initdata ek_nand_smc_config = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 2,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 2,
-
-	.ncs_read_pulse		= 4,
-	.nrd_pulse		= 4,
-	.ncs_write_pulse	= 4,
-	.nwe_pulse		= 4,
-
-	.read_cycle		= 7,
-	.write_cycle		= 7,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
-	.tdf_cycles		= 3,
-};
-
-static void __init ek_add_device_nand(void)
-{
-	ek_nand_data.bus_width_16 = board_have_nand_16bit();
-	/* setup bus-width (8 or 16) */
-	if (ek_nand_data.bus_width_16)
-		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
-	else
-		ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
-
-	/* configure chip-select 3 (NAND) */
-	sam9_smc_configure(0, 3, &ek_nand_smc_config);
-
-	at91_add_device_nand(&ek_nand_data);
-}
-
-
-/*
- *  ISI
- */
-static struct isi_platform_data __initdata isi_data = {
-	.frate			= ISI_CFG1_FRATE_CAPTURE_ALL,
-	/* to use codec and preview path simultaneously */
-	.full_mode		= 1,
-	.data_width_flags	= ISI_DATAWIDTH_8 | ISI_DATAWIDTH_10,
-	/* ISI_MCK is provided by programmable clock or external clock */
-	.mck_hz			= 25000000,
-};
-
-
-/*
- * soc-camera OV2640
- */
-#if defined(CONFIG_SOC_CAMERA_OV2640) || \
-	defined(CONFIG_SOC_CAMERA_OV2640_MODULE)
-static unsigned long isi_camera_query_bus_param(struct soc_camera_link *link)
-{
-	/* ISI board for ek using default 8-bits connection */
-	return SOCAM_DATAWIDTH_8;
-}
-
-static int i2c_camera_power(struct device *dev, int on)
-{
-	/* enable or disable the camera */
-	pr_debug("%s: %s the camera\n", __func__, on ? "ENABLE" : "DISABLE");
-	at91_set_gpio_output(AT91_PIN_PD13, !on);
-
-	if (!on)
-		goto out;
-
-	/* If enabled, give a reset impulse */
-	at91_set_gpio_output(AT91_PIN_PD12, 0);
-	msleep(20);
-	at91_set_gpio_output(AT91_PIN_PD12, 1);
-	msleep(100);
-
-out:
-	return 0;
-}
-
-static struct i2c_board_info i2c_camera = {
-	I2C_BOARD_INFO("ov2640", 0x30),
-};
-
-static struct soc_camera_link iclink_ov2640 = {
-	.bus_id			= 0,
-	.board_info		= &i2c_camera,
-	.i2c_adapter_id		= 0,
-	.power			= i2c_camera_power,
-	.query_bus_param	= isi_camera_query_bus_param,
-};
-
-static struct platform_device isi_ov2640 = {
-	.name	= "soc-camera-pdrv",
-	.id	= 0,
-	.dev	= {
-		.platform_data = &iclink_ov2640,
-	},
-};
-#endif
-
-
-/*
- * LCD Controller
- */
-#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static struct fb_videomode at91_tft_vga_modes[] = {
-	{
-		.name           = "LG",
-		.refresh	= 60,
-		.xres		= 480,		.yres		= 272,
-		.pixclock	= KHZ2PICOS(9000),
-
-		.left_margin	= 1,		.right_margin	= 1,
-		.upper_margin	= 40,		.lower_margin	= 1,
-		.hsync_len	= 45,		.vsync_len	= 1,
-
-		.sync		= 0,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-};
-
-static struct fb_monspecs at91fb_default_monspecs = {
-	.manufacturer	= "LG",
-	.monitor        = "LB043WQ1",
-
-	.modedb		= at91_tft_vga_modes,
-	.modedb_len	= ARRAY_SIZE(at91_tft_vga_modes),
-	.hfmin		= 15000,
-	.hfmax		= 17640,
-	.vfmin		= 57,
-	.vfmax		= 67,
-};
-
-#define AT91SAM9G45_DEFAULT_LCDCON2 	(ATMEL_LCDC_MEMOR_LITTLE \
-					| ATMEL_LCDC_DISTYPE_TFT \
-					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
-
-/* Driver datas */
-static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = {
-	.lcdcon_is_backlight		= true,
-	.default_bpp			= 32,
-	.default_dmacon			= ATMEL_LCDC_DMAEN,
-	.default_lcdcon2		= AT91SAM9G45_DEFAULT_LCDCON2,
-	.default_monspecs		= &at91fb_default_monspecs,
-	.guard_time			= 9,
-	.lcd_wiring_mode		= ATMEL_LCDC_WIRING_RGB,
-};
-
-#else
-static struct atmel_lcdfb_pdata __initdata ek_lcdc_data;
-#endif
-
-
-/*
- * ADCs and touchscreen
- */
-static struct at91_adc_data ek_adc_data = {
-	.channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5) | BIT(6) | BIT(7),
-	.use_external_triggers = true,
-	.vref = 3300,
-	.touchscreen_type = ATMEL_ADC_TOUCHSCREEN_4WIRE,
-};
-
-/*
- * GPIO Buttons
- */
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button ek_buttons[] = {
-	{	/* BP1, "leftclic" */
-		.code		= BTN_LEFT,
-		.gpio		= AT91_PIN_PB6,
-		.active_low	= 1,
-		.desc		= "left_click",
-		.wakeup		= 1,
-	},
-	{	/* BP2, "rightclic" */
-		.code		= BTN_RIGHT,
-		.gpio		= AT91_PIN_PB7,
-		.active_low	= 1,
-		.desc		= "right_click",
-		.wakeup		= 1,
-	},
-		/* BP3, "joystick" */
-	{
-		.code		= KEY_LEFT,
-		.gpio		= AT91_PIN_PB14,
-		.active_low	= 1,
-		.desc		= "Joystick Left",
-	},
-	{
-		.code		= KEY_RIGHT,
-		.gpio		= AT91_PIN_PB15,
-		.active_low	= 1,
-		.desc		= "Joystick Right",
-	},
-	{
-		.code		= KEY_UP,
-		.gpio		= AT91_PIN_PB16,
-		.active_low	= 1,
-		.desc		= "Joystick Up",
-	},
-	{
-		.code		= KEY_DOWN,
-		.gpio		= AT91_PIN_PB17,
-		.active_low	= 1,
-		.desc		= "Joystick Down",
-	},
-	{
-		.code		= KEY_ENTER,
-		.gpio		= AT91_PIN_PB18,
-		.active_low	= 1,
-		.desc		= "Joystick Press",
-	},
-};
-
-static struct gpio_keys_platform_data ek_button_data = {
-	.buttons	= ek_buttons,
-	.nbuttons	= ARRAY_SIZE(ek_buttons),
-};
-
-static struct platform_device ek_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &ek_button_data,
-	}
-};
-
-static void __init ek_add_device_buttons(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(ek_buttons); i++) {
-		at91_set_GPIO_periph(ek_buttons[i].gpio, 1);
-		at91_set_deglitch(ek_buttons[i].gpio, 1);
-	}
-
-	platform_device_register(&ek_button_device);
-}
-#else
-static void __init ek_add_device_buttons(void) {}
-#endif
-
-
-/*
- * AC97
- * reset_pin is not connected: NRST
- */
-static struct ac97c_platform_data ek_ac97_data = {
-	.reset_pin	= -EINVAL,
-};
-
-
-/*
- * LEDs ... these could all be PWM-driven, for variable brightness
- */
-static struct gpio_led ek_leds[] = {
-	{	/* "top" led, red, powerled */
-		.name			= "d8",
-		.gpio			= AT91_PIN_PD30,
-		.default_trigger	= "heartbeat",
-	},
-	{	/* "left" led, green, userled2, pwm3 */
-		.name			= "d6",
-		.gpio			= AT91_PIN_PD0,
-		.active_low		= 1,
-		.default_trigger	= "nand-disk",
-	},
-#if !IS_ENABLED(CONFIG_LEDS_PWM)
-	{	/* "right" led, green, userled1, pwm1 */
-		.name			= "d7",
-		.gpio			= AT91_PIN_PD31,
-		.active_low		= 1,
-		.default_trigger	= "mmc0",
-	},
-#endif
-};
-
-
-/*
- * PWM Leds
- */
-static struct pwm_lookup pwm_lookup[] = {
-	PWM_LOOKUP("at91sam9rl-pwm", 1, "leds_pwm", "d7",
-		   5000, PWM_POLARITY_INVERSED),
-};
-
-#if IS_ENABLED(CONFIG_LEDS_PWM)
-static struct led_pwm pwm_leds[] = {
-	{	/* "right" led, green, userled1, pwm1 */
-		.name = "d7",
-		.max_brightness	= 255,
-	},
-};
-
-static struct led_pwm_platform_data pwm_data = {
-	.num_leds	= ARRAY_SIZE(pwm_leds),
-	.leds		= pwm_leds,
-};
-
-static struct platform_device leds_pwm = {
-	.name	= "leds_pwm",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &pwm_data,
-	},
-};
-#endif
-
-static struct platform_device *devices[] __initdata = {
-#if defined(CONFIG_SOC_CAMERA_OV2640) || \
-	defined(CONFIG_SOC_CAMERA_OV2640_MODULE)
-	&isi_ov2640,
-#endif
-#if IS_ENABLED(CONFIG_LEDS_PWM)
-	&leds_pwm,
-#endif
-};
-
-static void __init ek_board_init(void)
-{
-	at91_register_devices();
-
-	/* Serial */
-	/* DGBU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 not connected on the -EK board */
-	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
-	at91_register_uart(AT91SAM9G45_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-	at91_add_device_serial();
-	/* USB HS Host */
-	at91_add_device_usbh_ohci(&ek_usbh_hs_data);
-	at91_add_device_usbh_ehci(&ek_usbh_hs_data);
-	/* USB HS Device */
-	at91_add_device_usba(&ek_usba_udc_data);
-	/* SPI */
-	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
-	/* MMC */
-	at91_add_device_mci(0, &mci0_data);
-	at91_add_device_mci(1, &mci1_data);
-	/* Ethernet */
-	at91_add_device_eth(&ek_macb_data);
-	/* NAND */
-	ek_add_device_nand();
-	/* I2C */
-	at91_add_device_i2c(0, NULL, 0);
-	/* ISI, using programmable clock as ISI_MCK */
-	at91_add_device_isi(&isi_data, true);
-	/* LCD Controller */
-	at91_add_device_lcdc(&ek_lcdc_data);
-	/* ADC and touchscreen */
-	at91_add_device_adc(&ek_adc_data);
-	/* Push Buttons */
-	ek_add_device_buttons();
-	/* AC97 */
-	at91_add_device_ac97(&ek_ac97_data);
-	/* LEDs */
-	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
-	pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup));
-#if IS_ENABLED(CONFIG_LEDS_PWM)
-	at91_add_device_pwm(1 << AT91_PWM1);
-#endif
-	/* Other platform devices */
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK")
-	/* Maintainer: Atmel */
-	.init_time	= at91_init_time,
-	.map_io		= at91_map_io,
-	.handle_irq	= at91_aic_handle_irq,
-	.init_early	= ek_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= ek_board_init,
-MACHINE_END