Merge tag 'qcom-soc-for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into next/soc

Merge "Qualcomm ARM Based SoC Updates for v3.15" from Kumar Gala:

* Add support for determining smp ops based on device tree.
* Add DT binding specs for Krait/Scorpion enable method
* Add DT binding specs for various Krait Processor controller complexes
* Add SoC SMP support for Krait Processor Subsystem v1 & v2

* tag 'qcom-soc-for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom:
  ARM: qcom: Add SMP support for KPSSv2
  ARM: qcom: Add SMP support for KPSSv1
  devicetree: bindings: Document qcom,saw2 node
  devicetree: bindings: Document qcom,kpss-acc
  devicetree: bindings: Document Krait/Scorpion cpus and enable-method
  ARM: qcom: Re-organize platsmp to make it extensible
  ARM: Introduce CPU_METHOD_OF_DECLARE() for cpu hotplug/smp
  ARM: qcom: Rename various msm prefixed functions to qcom
  clocksource: qcom: split building of legacy vs multiplatform support
  ARM: qcom: Split Qualcomm support into legacy and multiplatform
  clocksource: qcom: Move clocksource code out of mach-msm
  ARM: msm: kill off hotplug.c
  ARM: msm: Remove pen_release usage
  ARM: dts: msm: split out msm8660 and msm8960 soc into dts include

Signed-off-by: Olof Johansson <olof@lixom.net>

25 files changed, 623 insertions, 819 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e25419817791..f093f2030c1c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -657,9 +657,8 @@ config ARCH_PXA
 	help
 	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 
-config ARCH_MSM_NODT
-	bool "Qualcomm MSM"
-	select ARCH_MSM
+config ARCH_MSM
+	bool "Qualcomm MSM (non-multiplatform)"
 	select ARCH_REQUIRE_GPIOLIB
 	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
@@ -1005,6 +1004,8 @@ source "arch/arm/plat-pxa/Kconfig"
 
 source "arch/arm/mach-mmp/Kconfig"
 
+source "arch/arm/mach-qcom/Kconfig"
+
 source "arch/arm/mach-realview/Kconfig"
 
 source "arch/arm/mach-rockchip/Kconfig"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 0531da8e5216..4491c7b05275 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -956,7 +956,7 @@ config DEBUG_STI_UART
 
 config DEBUG_MSM_UART
 	bool
-	depends on ARCH_MSM
+	depends on ARCH_MSM || ARCH_QCOM
 
 config DEBUG_LL_INCLUDE
 	string
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 08a9ef58d9c3..51e5bede657f 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -180,6 +180,7 @@ machine-$(CONFIG_ARCH_OMAP2PLUS)	+= omap2
 machine-$(CONFIG_ARCH_ORION5X)		+= orion5x
 machine-$(CONFIG_ARCH_PICOXCELL)	+= picoxcell
 machine-$(CONFIG_ARCH_PXA)		+= pxa
+machine-$(CONFIG_ARCH_QCOM)		+= qcom
 machine-$(CONFIG_ARCH_REALVIEW)		+= realview
 machine-$(CONFIG_ARCH_ROCKCHIP)		+= rockchip
 machine-$(CONFIG_ARCH_RPC)		+= rpc
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 6d1e43d46187..3269029a1ce6 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -119,9 +119,6 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
 	kirkwood-ts219-6282.dtb
 dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
 dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
-dtb-$(CONFIG_ARCH_MSM) += qcom-msm8660-surf.dtb \
-	qcom-msm8960-cdp.dtb \
-	qcom-apq8074-dragonboard.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
 	armada-370-mirabox.dtb \
 	armada-370-netgear-rn102.dtb \
@@ -233,6 +230,9 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
 	dra7-evm.dtb
 dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb
 dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
+dtb-$(CONFIG_ARCH_QCOM) += qcom-msm8660-surf.dtb \
+	qcom-msm8960-cdp.dtb \
+	qcom-apq8074-dragonboard.dtb
 dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
 	ste-hrefprev60-stuib.dtb \
 	ste-hrefprev60-tvk.dtb \
diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts
index 68a72f5507b9..169bad90dac9 100644
--- a/arch/arm/boot/dts/qcom-msm8660-surf.dts
+++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts
@@ -1,63 +1,6 @@
-/dts-v1/;
-
-/include/ "skeleton.dtsi"
-
-#include <dt-bindings/clock/qcom,gcc-msm8660.h>
+#include "qcom-msm8660.dtsi"
 
 / {
 	model = "Qualcomm MSM8660 SURF";
 	compatible = "qcom,msm8660-surf", "qcom,msm8660";
-	interrupt-parent = <&intc>;
-
-	intc: interrupt-controller@2080000 {
-		compatible = "qcom,msm-8660-qgic";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		reg = < 0x02080000 0x1000 >,
-		      < 0x02081000 0x1000 >;
-	};
-
-	timer@2000000 {
-		compatible = "qcom,scss-timer", "qcom,msm-timer";
-		interrupts = <1 0 0x301>,
-			     <1 1 0x301>,
-			     <1 2 0x301>;
-		reg = <0x02000000 0x100>;
-		clock-frequency = <27000000>,
-				  <32768>;
-		cpu-offset = <0x40000>;
-	};
-
-	msmgpio: gpio@800000 {
-		compatible = "qcom,msm-gpio";
-		reg = <0x00800000 0x4000>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		ngpio = <173>;
-		interrupts = <0 16 0x4>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gcc: clock-controller@900000 {
-		compatible = "qcom,gcc-msm8660";
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-		reg = <0x900000 0x4000>;
-	};
-
-	serial@19c40000 {
-		compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-		reg = <0x19c40000 0x1000>,
-		      <0x19c00000 0x1000>;
-		interrupts = <0 195 0x0>;
-		clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
-		clock-names = "core", "iface";
-	};
-
-	qcom,ssbi@500000 {
-		compatible = "qcom,ssbi";
-		reg = <0x500000 0x1000>;
-		qcom,controller-type = "pmic-arbiter";
-	};
 };
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
new file mode 100644
index 000000000000..69d6c4edea30
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -0,0 +1,63 @@
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+#include <dt-bindings/clock/qcom,gcc-msm8660.h>
+
+/ {
+	model = "Qualcomm MSM8660";
+	compatible = "qcom,msm8660";
+	interrupt-parent = <&intc>;
+
+	intc: interrupt-controller@2080000 {
+		compatible = "qcom,msm-8660-qgic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = < 0x02080000 0x1000 >,
+		      < 0x02081000 0x1000 >;
+	};
+
+	timer@2000000 {
+		compatible = "qcom,scss-timer", "qcom,msm-timer";
+		interrupts = <1 0 0x301>,
+			     <1 1 0x301>,
+			     <1 2 0x301>;
+		reg = <0x02000000 0x100>;
+		clock-frequency = <27000000>,
+				  <32768>;
+		cpu-offset = <0x40000>;
+	};
+
+	msmgpio: gpio@800000 {
+		compatible = "qcom,msm-gpio";
+		reg = <0x00800000 0x4000>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ngpio = <173>;
+		interrupts = <0 16 0x4>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gcc: clock-controller@900000 {
+		compatible = "qcom,gcc-msm8660";
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		reg = <0x900000 0x4000>;
+	};
+
+	serial@19c40000 {
+		compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+		reg = <0x19c40000 0x1000>,
+		      <0x19c00000 0x1000>;
+		interrupts = <0 195 0x0>;
+		clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
+		clock-names = "core", "iface";
+	};
+
+	qcom,ssbi@500000 {
+		compatible = "qcom,ssbi";
+		reg = <0x500000 0x1000>;
+		qcom,controller-type = "pmic-arbiter";
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
index 7c30de4fa302..a58fb88315f6 100644
--- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
@@ -1,70 +1,6 @@
-/dts-v1/;
-
-/include/ "skeleton.dtsi"
-
-#include <dt-bindings/clock/qcom,gcc-msm8960.h>
+#include "qcom-msm8960.dtsi"
 
 / {
 	model = "Qualcomm MSM8960 CDP";
 	compatible = "qcom,msm8960-cdp", "qcom,msm8960";
-	interrupt-parent = <&intc>;
-
-	intc: interrupt-controller@2000000 {
-		compatible = "qcom,msm-qgic2";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		reg = < 0x02000000 0x1000 >,
-		      < 0x02002000 0x1000 >;
-	};
-
-	timer@200a000 {
-		compatible = "qcom,kpss-timer", "qcom,msm-timer";
-		interrupts = <1 1 0x301>,
-			     <1 2 0x301>,
-			     <1 3 0x301>;
-		reg = <0x0200a000 0x100>;
-		clock-frequency = <27000000>,
-				  <32768>;
-		cpu-offset = <0x80000>;
-	};
-
-	msmgpio: gpio@800000 {
-		compatible = "qcom,msm-gpio";
-		gpio-controller;
-		#gpio-cells = <2>;
-		ngpio = <150>;
-		interrupts = <0 16 0x4>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		reg = <0x800000 0x4000>;
-	};
-
-	gcc: clock-controller@900000 {
-		compatible = "qcom,gcc-msm8960";
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-		reg = <0x900000 0x4000>;
-	};
-
-	clock-controller@4000000 {
-		compatible = "qcom,mmcc-msm8960";
-		reg = <0x4000000 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	serial@16440000 {
-		compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-		reg = <0x16440000 0x1000>,
-		      <0x16400000 0x1000>;
-		interrupts = <0 154 0x0>;
-		clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
-		clock-names = "core", "iface";
-	};
-
-	qcom,ssbi@500000 {
-		compatible = "qcom,ssbi";
-		reg = <0x500000 0x1000>;
-		qcom,controller-type = "pmic-arbiter";
-	};
 };
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
new file mode 100644
index 000000000000..ff002826552a
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -0,0 +1,70 @@
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+#include <dt-bindings/clock/qcom,gcc-msm8960.h>
+
+/ {
+	model = "Qualcomm MSM8960";
+	compatible = "qcom,msm8960";
+	interrupt-parent = <&intc>;
+
+	intc: interrupt-controller@2000000 {
+		compatible = "qcom,msm-qgic2";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = < 0x02000000 0x1000 >,
+		      < 0x02002000 0x1000 >;
+	};
+
+	timer@200a000 {
+		compatible = "qcom,kpss-timer", "qcom,msm-timer";
+		interrupts = <1 1 0x301>,
+			     <1 2 0x301>,
+			     <1 3 0x301>;
+		reg = <0x0200a000 0x100>;
+		clock-frequency = <27000000>,
+				  <32768>;
+		cpu-offset = <0x80000>;
+	};
+
+	msmgpio: gpio@800000 {
+		compatible = "qcom,msm-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		ngpio = <150>;
+		interrupts = <0 16 0x4>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		reg = <0x800000 0x4000>;
+	};
+
+	gcc: clock-controller@900000 {
+		compatible = "qcom,gcc-msm8960";
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		reg = <0x900000 0x4000>;
+	};
+
+	clock-controller@4000000 {
+		compatible = "qcom,mmcc-msm8960";
+		reg = <0x4000000 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	serial@16440000 {
+		compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+		reg = <0x16440000 0x1000>,
+		      <0x16400000 0x1000>;
+		interrupts = <0 154 0x0>;
+		clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
+		clock-names = "core", "iface";
+	};
+
+	qcom,ssbi@500000 {
+		compatible = "qcom,ssbi";
+		reg = <0x500000 0x1000>;
+		qcom,controller-type = "pmic-arbiter";
+	};
+};
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index 22a3b9b5d4a1..772435b08207 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -114,6 +114,15 @@ struct smp_operations {
 #endif
 };
 
+struct of_cpu_method {
+	const char *method;
+	struct smp_operations *ops;
+};
+
+#define CPU_METHOD_OF_DECLARE(name, _method, _ops)			\
+	static const struct of_cpu_method __cpu_method_of_table_##name	\
+		__used __section(__cpu_method_of_table)			\
+		= { .method = _method, .ops = _ops }
 /*
  * set platform specific SMP operations
  */
diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c
index f751714d52c1..c7419a585ddc 100644
--- a/arch/arm/kernel/devtree.c
+++ b/arch/arm/kernel/devtree.c
@@ -18,6 +18,7 @@
 #include <linux/of_fdt.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
+#include <linux/smp.h>
 
 #include <asm/cputype.h>
 #include <asm/setup.h>
@@ -63,6 +64,34 @@ void __init arm_dt_memblock_reserve(void)
 	}
 }
 
+#ifdef CONFIG_SMP
+extern struct of_cpu_method __cpu_method_of_table_begin[];
+extern struct of_cpu_method __cpu_method_of_table_end[];
+
+static int __init set_smp_ops_by_method(struct device_node *node)
+{
+	const char *method;
+	struct of_cpu_method *m = __cpu_method_of_table_begin;
+
+	if (of_property_read_string(node, "enable-method", &method))
+		return 0;
+
+	for (; m < __cpu_method_of_table_end; m++)
+		if (!strcmp(m->method, method)) {
+			smp_set_ops(m->ops);
+			return 1;
+		}
+
+	return 0;
+}
+#else
+static inline int set_smp_ops_by_method(struct device_node *node)
+{
+	return 1;
+}
+#endif
+
+
 /*
  * arm_dt_init_cpu_maps - Function retrieves cpu nodes from the device tree
  * and builds the cpu logical map array containing MPIDR values related to
@@ -79,6 +108,7 @@ void __init arm_dt_init_cpu_maps(void)
 	 * read as 0.
 	 */
 	struct device_node *cpu, *cpus;
+	int found_method = 0;
 	u32 i, j, cpuidx = 1;
 	u32 mpidr = is_smp() ? read_cpuid_mpidr() & MPIDR_HWID_BITMASK : 0;
 
@@ -150,8 +180,18 @@ void __init arm_dt_init_cpu_maps(void)
 		}
 
 		tmp_map[i] = hwid;
+
+		if (!found_method)
+			found_method = set_smp_ops_by_method(cpu);
 	}
 
+	/*
+	 * Fallback to an enable-method in the cpus node if nothing found in
+	 * a cpu node.
+	 */
+	if (!found_method)
+		set_smp_ops_by_method(cpus);
+
 	if (!bootcpu_valid) {
 		pr_warn("DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map\n");
 		return;
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index 9625cf378931..a7f959e58c3d 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -1,50 +1,9 @@
-config ARCH_MSM
-	bool
-
-config ARCH_MSM_DT
-	bool "Qualcomm MSM DT Support" if ARCH_MULTI_V7
-	select ARCH_MSM
-	select ARCH_REQUIRE_GPIOLIB
-	select CLKSRC_OF
-	select GENERIC_CLOCKEVENTS
-	help
-	  Support for Qualcomm's devicetree based MSM systems.
-
 if ARCH_MSM
 
-menu "Qualcomm MSM SoC Selection"
-	depends on ARCH_MSM_DT
-
-config ARCH_MSM8X60
-	bool "Enable support for MSM8X60"
-	select ARM_GIC
-	select CPU_V7
-	select HAVE_SMP
-	select MSM_SCM if SMP
-	select MSM_TIMER
-
-config ARCH_MSM8960
-	bool "Enable support for MSM8960"
-	select ARM_GIC
-	select CPU_V7
-	select HAVE_SMP
-	select MSM_SCM if SMP
-	select MSM_TIMER
-
-config ARCH_MSM8974
-	bool "Enable support for MSM8974"
-	select ARM_GIC
-	select CPU_V7
-	select HAVE_ARM_ARCH_TIMER
-	select HAVE_SMP
-	select MSM_SCM if SMP
-
-endmenu
-
 choice
 	prompt "Qualcomm MSM SoC Type"
 	default ARCH_MSM7X00A
-	depends on ARCH_MSM_NODT
+	depends on ARCH_MSM
 
 config ARCH_MSM7X00A
 	bool "MSM7x00A / MSM7x01A"
@@ -54,7 +13,7 @@ config ARCH_MSM7X00A
 	select MACH_TROUT if !MACH_HALIBUT
 	select MSM_PROC_COMM
 	select MSM_SMD
-	select MSM_TIMER
+	select CLKSRC_QCOM
 	select MSM_SMD_PKG3
 
 config ARCH_MSM7X30
@@ -66,7 +25,7 @@ config ARCH_MSM7X30
 	select MSM_GPIOMUX
 	select MSM_PROC_COMM
 	select MSM_SMD
-	select MSM_TIMER
+	select CLKSRC_QCOM
 	select MSM_VIC
 
 config ARCH_QSD8X50
@@ -78,7 +37,7 @@ config ARCH_QSD8X50
 	select MSM_GPIOMUX
 	select MSM_PROC_COMM
 	select MSM_SMD
-	select MSM_TIMER
+	select CLKSRC_QCOM
 	select MSM_VIC
 
 endchoice
@@ -99,7 +58,7 @@ config  MSM_VIC
 	bool
 
 menu "Qualcomm MSM Board Type"
-	depends on ARCH_MSM_NODT
+	depends on ARCH_MSM
 
 config MACH_HALIBUT
 	depends on ARCH_MSM
@@ -153,7 +112,4 @@ config MSM_GPIOMUX
 config MSM_SCM
 	bool
 
-config MSM_TIMER
-	bool
-
 endif
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index 8e307a10d3c3..27c078a568df 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -1,4 +1,3 @@
-obj-$(CONFIG_MSM_TIMER) += timer.o
 obj-$(CONFIG_MSM_PROC_COMM) += clock.o
 
 obj-$(CONFIG_MSM_VIC) += irq-vic.o
@@ -14,18 +13,11 @@ obj-$(CONFIG_ARCH_QSD8X50) += dma.o io.o
 
 obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o
 obj-$(CONFIG_MSM_SMD) += last_radio_log.o
-obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o
-
-CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
-
-obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
-obj-$(CONFIG_SMP) += headsmp.o platsmp.o
 
 obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o
 obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o board-trout-panel.o devices-msm7x00.o
 obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
 obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
 obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
-obj-$(CONFIG_ARCH_MSM_DT) += board-dt.o
 obj-$(CONFIG_MSM_GPIOMUX) += gpiomux.o
 obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o
diff --git a/arch/arm/mach-msm/common.h b/arch/arm/mach-msm/common.h
index 33c7725adae2..572479a3c7be 100644
--- a/arch/arm/mach-msm/common.h
+++ b/arch/arm/mach-msm/common.h
@@ -23,9 +23,6 @@ extern void msm_map_qsd8x50_io(void);
 extern void __iomem *__msm_ioremap_caller(phys_addr_t phys_addr, size_t size,
 					  unsigned int mtype, void *caller);
 
-extern struct smp_operations msm_smp_ops;
-extern void msm_cpu_die(unsigned int cpu);
-
 struct msm_mmc_platform_data;
 
 extern void msm_add_devices(void);
diff --git a/arch/arm/mach-msm/headsmp.S b/arch/arm/mach-msm/headsmp.S
deleted file mode 100644
index 6c62c3f82fe6..000000000000
--- a/arch/arm/mach-msm/headsmp.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/headsmp.S
- *
- *  Copyright (c) 2003 ARM Limited
- *  All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-
-/*
- * MSM specific entry point for secondary CPUs.  This provides
- * a "holding pen" into which all secondary cores are held until we're
- * ready for them to initialise.
- */
-ENTRY(msm_secondary_startup)
-	mrc	p15, 0, r0, c0, c0, 5
-	and	r0, r0, #15
-	adr	r4, 1f
-	ldmia	r4, {r5, r6}
-	sub	r4, r4, r5
-	add	r6, r6, r4
-pen:	ldr	r7, [r6]
-	cmp	r7, r0
-	bne	pen
-
-	/*
-	 * we've been released from the holding pen: secondary_stack
-	 * should now contain the SVC stack for this core
-	 */
-	b	secondary_startup
-ENDPROC(msm_secondary_startup)
-
-	.align
-1:	.long	.
-	.long	pen_release
diff --git a/arch/arm/mach-msm/hotplug.c b/arch/arm/mach-msm/hotplug.c
deleted file mode 100644
index 326a87261f9a..000000000000
--- a/arch/arm/mach-msm/hotplug.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- *  Copyright (C) 2002 ARM Ltd.
- *  All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/smp.h>
-
-#include <asm/smp_plat.h>
-
-#include "common.h"
-
-static inline void cpu_enter_lowpower(void)
-{
-}
-
-static inline void cpu_leave_lowpower(void)
-{
-}
-
-static inline void platform_do_lowpower(unsigned int cpu)
-{
-	/* Just enter wfi for now. TODO: Properly shut off the cpu. */
-	for (;;) {
-		/*
-		 * here's the WFI
-		 */
-		asm("wfi"
-		    :
-		    :
-		    : "memory", "cc");
-
-		if (pen_release == cpu_logical_map(cpu)) {
-			/*
-			 * OK, proper wakeup, we're done
-			 */
-			break;
-		}
-
-		/*
-		 * getting here, means that we have come out of WFI without
-		 * having been woken up - this shouldn't happen
-		 *
-		 * The trouble is, letting people know about this is not really
-		 * possible, since we are currently running incoherently, and
-		 * therefore cannot safely call printk() or anything else
-		 */
-		pr_debug("CPU%u: spurious wakeup call\n", cpu);
-	}
-}
-
-/*
- * platform-specific code to shutdown a CPU
- *
- * Called with IRQs disabled
- */
-void __ref msm_cpu_die(unsigned int cpu)
-{
-	/*
-	 * we're ready for shutdown now, so do it
-	 */
-	cpu_enter_lowpower();
-	platform_do_lowpower(cpu);
-
-	/*
-	 * bring this CPU back into the world of cache
-	 * coherency, and then restore interrupts
-	 */
-	cpu_leave_lowpower();
-}
diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c
deleted file mode 100644
index f10a1f58fde9..000000000000
--- a/arch/arm/mach-msm/platsmp.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- *  Copyright (C) 2002 ARM Ltd.
- *  All Rights Reserved
- *  Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/jiffies.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-
-#include <asm/cacheflush.h>
-#include <asm/cputype.h>
-#include <asm/mach-types.h>
-#include <asm/smp_plat.h>
-
-#include "scm-boot.h"
-#include "common.h"
-
-#define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x15A0
-#define SCSS_CPU1CORE_RESET 0xD80
-#define SCSS_DBG_STATUS_CORE_PWRDUP 0xE64
-
-extern void msm_secondary_startup(void);
-
-static DEFINE_SPINLOCK(boot_lock);
-
-static inline int get_core_count(void)
-{
-	/* 1 + the PART[1:0] field of MIDR */
-	return ((read_cpuid_id() >> 4) & 3) + 1;
-}
-
-static void msm_secondary_init(unsigned int cpu)
-{
-	/*
-	 * let the primary processor know we're out of the
-	 * pen, then head off into the C entry point
-	 */
-	pen_release = -1;
-	smp_wmb();
-
-	/*
-	 * Synchronise with the boot thread.
-	 */
-	spin_lock(&boot_lock);
-	spin_unlock(&boot_lock);
-}
-
-static void prepare_cold_cpu(unsigned int cpu)
-{
-	int ret;
-	ret = scm_set_boot_addr(virt_to_phys(msm_secondary_startup),
-				SCM_FLAG_COLDBOOT_CPU1);
-	if (ret == 0) {
-		void __iomem *sc1_base_ptr;
-		sc1_base_ptr = ioremap_nocache(0x00902000, SZ_4K*2);
-		if (sc1_base_ptr) {
-			writel(0, sc1_base_ptr + VDD_SC1_ARRAY_CLAMP_GFS_CTL);
-			writel(0, sc1_base_ptr + SCSS_CPU1CORE_RESET);
-			writel(3, sc1_base_ptr + SCSS_DBG_STATUS_CORE_PWRDUP);
-			iounmap(sc1_base_ptr);
-		}
-	} else
-		printk(KERN_DEBUG "Failed to set secondary core boot "
-				  "address\n");
-}
-
-static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle)
-{
-	unsigned long timeout;
-	static int cold_boot_done;
-
-	/* Only need to bring cpu out of reset this way once */
-	if (cold_boot_done == false) {
-		prepare_cold_cpu(cpu);
-		cold_boot_done = true;
-	}
-
-	/*
-	 * set synchronisation state between this boot processor
-	 * and the secondary one
-	 */
-	spin_lock(&boot_lock);
-
-	/*
-	 * The secondary processor is waiting to be released from
-	 * the holding pen - release it, then wait for it to flag
-	 * that it has been released by resetting pen_release.
-	 *
-	 * Note that "pen_release" is the hardware CPU ID, whereas
-	 * "cpu" is Linux's internal ID.
-	 */
-	pen_release = cpu_logical_map(cpu);
-	sync_cache_w(&pen_release);
-
-	/*
-	 * Send the secondary CPU a soft interrupt, thereby causing
-	 * the boot monitor to read the system wide flags register,
-	 * and branch to the address found there.
-	 */
-	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
-
-	timeout = jiffies + (1 * HZ);
-	while (time_before(jiffies, timeout)) {
-		smp_rmb();
-		if (pen_release == -1)
-			break;
-
-		udelay(10);
-	}
-
-	/*
-	 * now the secondary core is starting up let it run its
-	 * calibrations, then wait for it to finish
-	 */
-	spin_unlock(&boot_lock);
-
-	return pen_release != -1 ? -ENOSYS : 0;
-}
-
-/*
- * Initialise the CPU possible map early - this describes the CPUs
- * which may be present or become present in the system. The msm8x60
- * does not support the ARM SCU, so just set the possible cpu mask to
- * NR_CPUS.
- */
-static void __init msm_smp_init_cpus(void)
-{
-	unsigned int i, ncores = get_core_count();
-
-	if (ncores > nr_cpu_ids) {
-		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
-			ncores, nr_cpu_ids);
-		ncores = nr_cpu_ids;
-	}
-
-	for (i = 0; i < ncores; i++)
-		set_cpu_possible(i, true);
-}
-
-static void __init msm_smp_prepare_cpus(unsigned int max_cpus)
-{
-}
-
-struct smp_operations msm_smp_ops __initdata = {
-	.smp_init_cpus		= msm_smp_init_cpus,
-	.smp_prepare_cpus	= msm_smp_prepare_cpus,
-	.smp_secondary_init	= msm_secondary_init,
-	.smp_boot_secondary	= msm_boot_secondary,
-#ifdef CONFIG_HOTPLUG_CPU
-	.cpu_die		= msm_cpu_die,
-#endif
-};
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
deleted file mode 100644
index fd1644987534..000000000000
--- a/arch/arm/mach-msm/timer.c
+++ /dev/null
@@ -1,333 +0,0 @@
-/*
- *
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2009-2012, The Linux Foundation. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/cpu.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/sched_clock.h>
-
-#include <asm/mach/time.h>
-
-#include "common.h"
-
-#define TIMER_MATCH_VAL			0x0000
-#define TIMER_COUNT_VAL			0x0004
-#define TIMER_ENABLE			0x0008
-#define TIMER_ENABLE_CLR_ON_MATCH_EN	BIT(1)
-#define TIMER_ENABLE_EN			BIT(0)
-#define TIMER_CLEAR			0x000C
-#define DGT_CLK_CTL			0x10
-#define DGT_CLK_CTL_DIV_4		0x3
-#define TIMER_STS_GPT0_CLR_PEND		BIT(10)
-
-#define GPT_HZ 32768
-
-#define MSM_DGT_SHIFT 5
-
-static void __iomem *event_base;
-static void __iomem *sts_base;
-
-static irqreturn_t msm_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = dev_id;
-	/* Stop the timer tick */
-	if (evt->mode == CLOCK_EVT_MODE_ONESHOT) {
-		u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE);
-		ctrl &= ~TIMER_ENABLE_EN;
-		writel_relaxed(ctrl, event_base + TIMER_ENABLE);
-	}
-	evt->event_handler(evt);
-	return IRQ_HANDLED;
-}
-
-static int msm_timer_set_next_event(unsigned long cycles,
-				    struct clock_event_device *evt)
-{
-	u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE);
-
-	ctrl &= ~TIMER_ENABLE_EN;
-	writel_relaxed(ctrl, event_base + TIMER_ENABLE);
-
-	writel_relaxed(ctrl, event_base + TIMER_CLEAR);
-	writel_relaxed(cycles, event_base + TIMER_MATCH_VAL);
-
-	if (sts_base)
-		while (readl_relaxed(sts_base) & TIMER_STS_GPT0_CLR_PEND)
-			cpu_relax();
-
-	writel_relaxed(ctrl | TIMER_ENABLE_EN, event_base + TIMER_ENABLE);
-	return 0;
-}
-
-static void msm_timer_set_mode(enum clock_event_mode mode,
-			      struct clock_event_device *evt)
-{
-	u32 ctrl;
-
-	ctrl = readl_relaxed(event_base + TIMER_ENABLE);
-	ctrl &= ~(TIMER_ENABLE_EN | TIMER_ENABLE_CLR_ON_MATCH_EN);
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_RESUME:
-	case CLOCK_EVT_MODE_PERIODIC:
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* Timer is enabled in set_next_event */
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		break;
-	}
-	writel_relaxed(ctrl, event_base + TIMER_ENABLE);
-}
-
-static struct clock_event_device __percpu *msm_evt;
-
-static void __iomem *source_base;
-
-static notrace cycle_t msm_read_timer_count(struct clocksource *cs)
-{
-	return readl_relaxed(source_base + TIMER_COUNT_VAL);
-}
-
-static notrace cycle_t msm_read_timer_count_shift(struct clocksource *cs)
-{
-	/*
-	 * Shift timer count down by a constant due to unreliable lower bits
-	 * on some targets.
-	 */
-	return msm_read_timer_count(cs) >> MSM_DGT_SHIFT;
-}
-
-static struct clocksource msm_clocksource = {
-	.name	= "dg_timer",
-	.rating	= 300,
-	.read	= msm_read_timer_count,
-	.mask	= CLOCKSOURCE_MASK(32),
-	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static int msm_timer_irq;
-static int msm_timer_has_ppi;
-
-static int msm_local_timer_setup(struct clock_event_device *evt)
-{
-	int cpu = smp_processor_id();
-	int err;
-
-	evt->irq = msm_timer_irq;
-	evt->name = "msm_timer";
-	evt->features = CLOCK_EVT_FEAT_ONESHOT;
-	evt->rating = 200;
-	evt->set_mode = msm_timer_set_mode;
-	evt->set_next_event = msm_timer_set_next_event;
-	evt->cpumask = cpumask_of(cpu);
-
-	clockevents_config_and_register(evt, GPT_HZ, 4, 0xffffffff);
-
-	if (msm_timer_has_ppi) {
-		enable_percpu_irq(evt->irq, IRQ_TYPE_EDGE_RISING);
-	} else {
-		err = request_irq(evt->irq, msm_timer_interrupt,
-				IRQF_TIMER | IRQF_NOBALANCING |
-				IRQF_TRIGGER_RISING, "gp_timer", evt);
-		if (err)
-			pr_err("request_irq failed\n");
-	}
-
-	return 0;
-}
-
-static void msm_local_timer_stop(struct clock_event_device *evt)
-{
-	evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
-	disable_percpu_irq(evt->irq);
-}
-
-static int msm_timer_cpu_notify(struct notifier_block *self,
-					   unsigned long action, void *hcpu)
-{
-	/*
-	 * Grab cpu pointer in each case to avoid spurious
-	 * preemptible warnings
-	 */
-	switch (action & ~CPU_TASKS_FROZEN) {
-	case CPU_STARTING:
-		msm_local_timer_setup(this_cpu_ptr(msm_evt));
-		break;
-	case CPU_DYING:
-		msm_local_timer_stop(this_cpu_ptr(msm_evt));
-		break;
-	}
-
-	return NOTIFY_OK;
-}
-
-static struct notifier_block msm_timer_cpu_nb = {
-	.notifier_call = msm_timer_cpu_notify,
-};
-
-static u64 notrace msm_sched_clock_read(void)
-{
-	return msm_clocksource.read(&msm_clocksource);
-}
-
-static void __init msm_timer_init(u32 dgt_hz, int sched_bits, int irq,
-				  bool percpu)
-{
-	struct clocksource *cs = &msm_clocksource;
-	int res = 0;
-
-	msm_timer_irq = irq;
-	msm_timer_has_ppi = percpu;
-
-	msm_evt = alloc_percpu(struct clock_event_device);
-	if (!msm_evt) {
-		pr_err("memory allocation failed for clockevents\n");
-		goto err;
-	}
-
-	if (percpu)
-		res = request_percpu_irq(irq, msm_timer_interrupt,
-					 "gp_timer", msm_evt);
-
-	if (res) {
-		pr_err("request_percpu_irq failed\n");
-	} else {
-		res = register_cpu_notifier(&msm_timer_cpu_nb);
-		if (res) {
-			free_percpu_irq(irq, msm_evt);
-			goto err;
-		}
-
-		/* Immediately configure the timer on the boot CPU */
-		msm_local_timer_setup(__this_cpu_ptr(msm_evt));
-	}
-
-err:
-	writel_relaxed(TIMER_ENABLE_EN, source_base + TIMER_ENABLE);
-	res = clocksource_register_hz(cs, dgt_hz);
-	if (res)
-		pr_err("clocksource_register failed\n");
-	sched_clock_register(msm_sched_clock_read, sched_bits, dgt_hz);
-}
-
-#ifdef CONFIG_OF
-static void __init msm_dt_timer_init(struct device_node *np)
-{
-	u32 freq;
-	int irq;
-	struct resource res;
-	u32 percpu_offset;
-	void __iomem *base;
-	void __iomem *cpu0_base;
-
-	base = of_iomap(np, 0);
-	if (!base) {
-		pr_err("Failed to map event base\n");
-		return;
-	}
-
-	/* We use GPT0 for the clockevent */
-	irq = irq_of_parse_and_map(np, 1);
-	if (irq <= 0) {
-		pr_err("Can't get irq\n");
-		return;
-	}
-
-	/* We use CPU0's DGT for the clocksource */
-	if (of_property_read_u32(np, "cpu-offset", &percpu_offset))
-		percpu_offset = 0;
-
-	if (of_address_to_resource(np, 0, &res)) {
-		pr_err("Failed to parse DGT resource\n");
-		return;
-	}
-
-	cpu0_base = ioremap(res.start + percpu_offset, resource_size(&res));
-	if (!cpu0_base) {
-		pr_err("Failed to map source base\n");
-		return;
-	}
-
-	if (of_property_read_u32(np, "clock-frequency", &freq)) {
-		pr_err("Unknown frequency\n");
-		return;
-	}
-
-	event_base = base + 0x4;
-	sts_base = base + 0x88;
-	source_base = cpu0_base + 0x24;
-	freq /= 4;
-	writel_relaxed(DGT_CLK_CTL_DIV_4, source_base + DGT_CLK_CTL);
-
-	msm_timer_init(freq, 32, irq, !!percpu_offset);
-}
-CLOCKSOURCE_OF_DECLARE(kpss_timer, "qcom,kpss-timer", msm_dt_timer_init);
-CLOCKSOURCE_OF_DECLARE(scss_timer, "qcom,scss-timer", msm_dt_timer_init);
-#endif
-
-static int __init msm_timer_map(phys_addr_t addr, u32 event, u32 source,
-				u32 sts)
-{
-	void __iomem *base;
-
-	base = ioremap(addr, SZ_256);
-	if (!base) {
-		pr_err("Failed to map timer base\n");
-		return -ENOMEM;
-	}
-	event_base = base + event;
-	source_base = base + source;
-	if (sts)
-		sts_base = base + sts;
-
-	return 0;
-}
-
-void __init msm7x01_timer_init(void)
-{
-	struct clocksource *cs = &msm_clocksource;
-
-	if (msm_timer_map(0xc0100000, 0x0, 0x10, 0x0))
-		return;
-	cs->read = msm_read_timer_count_shift;
-	cs->mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT));
-	/* 600 KHz */
-	msm_timer_init(19200000 >> MSM_DGT_SHIFT, 32 - MSM_DGT_SHIFT, 7,
-			false);
-}
-
-void __init msm7x30_timer_init(void)
-{
-	if (msm_timer_map(0xc0100000, 0x4, 0x24, 0x80))
-		return;
-	msm_timer_init(24576000 / 4, 32, 1, false);
-}
-
-void __init qsd8x50_timer_init(void)
-{
-	if (msm_timer_map(0xAC100000, 0x0, 0x10, 0x34))
-		return;
-	msm_timer_init(19200000 / 4, 32, 7, false);
-}
diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig
new file mode 100644
index 000000000000..a028be234334
--- /dev/null
+++ b/arch/arm/mach-qcom/Kconfig
@@ -0,0 +1,33 @@
+config ARCH_QCOM
+	bool "Qualcomm Support" if ARCH_MULTI_V7
+	select ARCH_REQUIRE_GPIOLIB
+	select ARM_GIC
+	select CLKSRC_OF
+	select GENERIC_CLOCKEVENTS
+	select HAVE_SMP
+	select QCOM_SCM if SMP
+	help
+	  Support for Qualcomm's devicetree based systems.
+
+if ARCH_QCOM
+
+menu "Qualcomm SoC Selection"
+
+config ARCH_MSM8X60
+	bool "Enable support for MSM8X60"
+	select CLKSRC_QCOM
+
+config ARCH_MSM8960
+	bool "Enable support for MSM8960"
+	select CLKSRC_QCOM
+
+config ARCH_MSM8974
+	bool "Enable support for MSM8974"
+	select HAVE_ARM_ARCH_TIMER
+
+endmenu
+
+config QCOM_SCM
+	bool
+
+endif
diff --git a/arch/arm/mach-qcom/Makefile b/arch/arm/mach-qcom/Makefile
new file mode 100644
index 000000000000..8f756ae1ae31
--- /dev/null
+++ b/arch/arm/mach-qcom/Makefile
@@ -0,0 +1,5 @@
+obj-y			:= board.o
+obj-$(CONFIG_SMP)	+= platsmp.o
+obj-$(CONFIG_QCOM_SCM)	+= scm.o scm-boot.o
+
+CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
diff --git a/arch/arm/mach-msm/board-dt.c b/arch/arm/mach-qcom/board.c
index 1f11d93e700e..bae617ef0b31 100644
--- a/arch/arm/mach-msm/board-dt.c
+++ b/arch/arm/mach-qcom/board.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2010-2012,2013 The Linux Foundation. All rights reserved.
+/* Copyright (c) 2010-2014 The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
@@ -11,31 +11,16 @@
  */
 
 #include <linux/init.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
 
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
 
-#include "common.h"
-
-static const char * const msm_dt_match[] __initconst = {
-	"qcom,msm8660-fluid",
+static const char * const qcom_dt_match[] __initconst = {
 	"qcom,msm8660-surf",
 	"qcom,msm8960-cdp",
-	NULL
-};
-
-static const char * const apq8074_dt_match[] __initconst = {
 	"qcom,apq8074-dragonboard",
 	NULL
 };
 
-DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)")
-	.smp = smp_ops(msm_smp_ops),
-	.dt_compat = msm_dt_match,
-MACHINE_END
-
-DT_MACHINE_START(APQ_DT, "Qualcomm MSM (Flattened Device Tree)")
-	.dt_compat = apq8074_dt_match,
+DT_MACHINE_START(QCOM_DT, "Qualcomm (Flattened Device Tree)")
+	.dt_compat = qcom_dt_match,
 MACHINE_END
diff --git a/arch/arm/mach-qcom/platsmp.c b/arch/arm/mach-qcom/platsmp.c
new file mode 100644
index 000000000000..d6908569ecaf
--- /dev/null
+++ b/arch/arm/mach-qcom/platsmp.c
@@ -0,0 +1,378 @@
+/*
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *  Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *  Copyright (c) 2014 The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+
+#include <asm/smp_plat.h>
+
+#include "scm-boot.h"
+
+#define VDD_SC1_ARRAY_CLAMP_GFS_CTL	0x35a0
+#define SCSS_CPU1CORE_RESET		0x2d80
+#define SCSS_DBG_STATUS_CORE_PWRDUP	0x2e64
+
+#define APCS_CPU_PWR_CTL	0x04
+#define PLL_CLAMP		BIT(8)
+#define CORE_PWRD_UP		BIT(7)
+#define COREPOR_RST		BIT(5)
+#define CORE_RST		BIT(4)
+#define L2DT_SLP		BIT(3)
+#define CLAMP			BIT(0)
+
+#define APC_PWR_GATE_CTL	0x14
+#define BHS_CNT_SHIFT		24
+#define LDO_PWR_DWN_SHIFT	16
+#define LDO_BYP_SHIFT		8
+#define BHS_SEG_SHIFT		1
+#define BHS_EN			BIT(0)
+
+#define APCS_SAW2_VCTL		0x14
+#define APCS_SAW2_2_VCTL	0x1c
+
+extern void secondary_startup(void);
+
+static DEFINE_SPINLOCK(boot_lock);
+
+#ifdef CONFIG_HOTPLUG_CPU
+static void __ref qcom_cpu_die(unsigned int cpu)
+{
+	wfi();
+}
+#endif
+
+static void qcom_secondary_init(unsigned int cpu)
+{
+	/*
+	 * Synchronise with the boot thread.
+	 */
+	spin_lock(&boot_lock);
+	spin_unlock(&boot_lock);
+}
+
+static int scss_release_secondary(unsigned int cpu)
+{
+	struct device_node *node;
+	void __iomem *base;
+
+	node = of_find_compatible_node(NULL, NULL, "qcom,gcc-msm8660");
+	if (!node) {
+		pr_err("%s: can't find node\n", __func__);
+		return -ENXIO;
+	}
+
+	base = of_iomap(node, 0);
+	of_node_put(node);
+	if (!base)
+		return -ENOMEM;
+
+	writel_relaxed(0, base + VDD_SC1_ARRAY_CLAMP_GFS_CTL);
+	writel_relaxed(0, base + SCSS_CPU1CORE_RESET);
+	writel_relaxed(3, base + SCSS_DBG_STATUS_CORE_PWRDUP);
+	mb();
+	iounmap(base);
+
+	return 0;
+}
+
+static int kpssv1_release_secondary(unsigned int cpu)
+{
+	int ret = 0;
+	void __iomem *reg, *saw_reg;
+	struct device_node *cpu_node, *acc_node, *saw_node;
+	u32 val;
+
+	cpu_node = of_get_cpu_node(cpu, NULL);
+	if (!cpu_node)
+		return -ENODEV;
+
+	acc_node = of_parse_phandle(cpu_node, "qcom,acc", 0);
+	if (!acc_node) {
+		ret = -ENODEV;
+		goto out_acc;
+	}
+
+	saw_node = of_parse_phandle(cpu_node, "qcom,saw", 0);
+	if (!saw_node) {
+		ret = -ENODEV;
+		goto out_saw;
+	}
+
+	reg = of_iomap(acc_node, 0);
+	if (!reg) {
+		ret = -ENOMEM;
+		goto out_acc_map;
+	}
+
+	saw_reg = of_iomap(saw_node, 0);
+	if (!saw_reg) {
+		ret = -ENOMEM;
+		goto out_saw_map;
+	}
+
+	/* Turn on CPU rail */
+	writel_relaxed(0xA4, saw_reg + APCS_SAW2_VCTL);
+	mb();
+	udelay(512);
+
+	/* Krait bring-up sequence */
+	val = PLL_CLAMP | L2DT_SLP | CLAMP;
+	writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
+	val &= ~L2DT_SLP;
+	writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
+	mb();
+	ndelay(300);
+
+	val |= COREPOR_RST;
+	writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
+	mb();
+	udelay(2);
+
+	val &= ~CLAMP;
+	writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
+	mb();
+	udelay(2);
+
+	val &= ~COREPOR_RST;
+	writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
+	mb();
+	udelay(100);
+
+	val |= CORE_PWRD_UP;
+	writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
+	mb();
+
+	iounmap(saw_reg);
+out_saw_map:
+	iounmap(reg);
+out_acc_map:
+	of_node_put(saw_node);
+out_saw:
+	of_node_put(acc_node);
+out_acc:
+	of_node_put(cpu_node);
+	return ret;
+}
+
+static int kpssv2_release_secondary(unsigned int cpu)
+{
+	void __iomem *reg;
+	struct device_node *cpu_node, *l2_node, *acc_node, *saw_node;
+	void __iomem *l2_saw_base;
+	unsigned reg_val;
+	int ret;
+
+	cpu_node = of_get_cpu_node(cpu, NULL);
+	if (!cpu_node)
+		return -ENODEV;
+
+	acc_node = of_parse_phandle(cpu_node, "qcom,acc", 0);
+	if (!acc_node) {
+		ret = -ENODEV;
+		goto out_acc;
+	}
+
+	l2_node = of_parse_phandle(cpu_node, "next-level-cache", 0);
+	if (!l2_node) {
+		ret = -ENODEV;
+		goto out_l2;
+	}
+
+	saw_node = of_parse_phandle(l2_node, "qcom,saw", 0);
+	if (!saw_node) {
+		ret = -ENODEV;
+		goto out_saw;
+	}
+
+	reg = of_iomap(acc_node, 0);
+	if (!reg) {
+		ret = -ENOMEM;
+		goto out_map;
+	}
+
+	l2_saw_base = of_iomap(saw_node, 0);
+	if (!l2_saw_base) {
+		ret = -ENOMEM;
+		goto out_saw_map;
+	}
+
+	/* Turn on the BHS, turn off LDO Bypass and power down LDO */
+	reg_val = (64 << BHS_CNT_SHIFT) | (0x3f << LDO_PWR_DWN_SHIFT) | BHS_EN;
+	writel_relaxed(reg_val, reg + APC_PWR_GATE_CTL);
+	mb();
+	/* wait for the BHS to settle */
+	udelay(1);
+
+	/* Turn on BHS segments */
+	reg_val |= 0x3f << BHS_SEG_SHIFT;
+	writel_relaxed(reg_val, reg + APC_PWR_GATE_CTL);
+	mb();
+	 /* wait for the BHS to settle */
+	udelay(1);
+
+	/* Finally turn on the bypass so that BHS supplies power */
+	reg_val |= 0x3f << LDO_BYP_SHIFT;
+	writel_relaxed(reg_val, reg + APC_PWR_GATE_CTL);
+
+	/* enable max phases */
+	writel_relaxed(0x10003, l2_saw_base + APCS_SAW2_2_VCTL);
+	mb();
+	udelay(50);
+
+	reg_val = COREPOR_RST | CLAMP;
+	writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL);
+	mb();
+	udelay(2);
+
+	reg_val &= ~CLAMP;
+	writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL);
+	mb();
+	udelay(2);
+
+	reg_val &= ~COREPOR_RST;
+	writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL);
+	mb();
+
+	reg_val |= CORE_PWRD_UP;
+	writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL);
+	mb();
+
+	ret = 0;
+
+	iounmap(l2_saw_base);
+out_saw_map:
+	iounmap(reg);
+out_map:
+	of_node_put(saw_node);
+out_saw:
+	of_node_put(l2_node);
+out_l2:
+	of_node_put(acc_node);
+out_acc:
+	of_node_put(cpu_node);
+
+	return ret;
+}
+
+static DEFINE_PER_CPU(int, cold_boot_done);
+
+static int qcom_boot_secondary(unsigned int cpu, int (*func)(unsigned int))
+{
+	int ret = 0;
+
+	if (!per_cpu(cold_boot_done, cpu)) {
+		ret = func(cpu);
+		if (!ret)
+			per_cpu(cold_boot_done, cpu) = true;
+	}
+
+	/*
+	 * set synchronisation state between this boot processor
+	 * and the secondary one
+	 */
+	spin_lock(&boot_lock);
+
+	/*
+	 * Send the secondary CPU a soft interrupt, thereby causing
+	 * the boot monitor to read the system wide flags register,
+	 * and branch to the address found there.
+	 */
+	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+
+	/*
+	 * now the secondary core is starting up let it run its
+	 * calibrations, then wait for it to finish
+	 */
+	spin_unlock(&boot_lock);
+
+	return ret;
+}
+
+static int msm8660_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	return qcom_boot_secondary(cpu, scss_release_secondary);
+}
+
+static int kpssv1_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	return qcom_boot_secondary(cpu, kpssv1_release_secondary);
+}
+
+static int kpssv2_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	return qcom_boot_secondary(cpu, kpssv2_release_secondary);
+}
+
+static void __init qcom_smp_prepare_cpus(unsigned int max_cpus)
+{
+	int cpu, map;
+	unsigned int flags = 0;
+	static const int cold_boot_flags[] = {
+		0,
+		SCM_FLAG_COLDBOOT_CPU1,
+		SCM_FLAG_COLDBOOT_CPU2,
+		SCM_FLAG_COLDBOOT_CPU3,
+	};
+
+	for_each_present_cpu(cpu) {
+		map = cpu_logical_map(cpu);
+		if (WARN_ON(map >= ARRAY_SIZE(cold_boot_flags))) {
+			set_cpu_present(cpu, false);
+			continue;
+		}
+		flags |= cold_boot_flags[map];
+	}
+
+	if (scm_set_boot_addr(virt_to_phys(secondary_startup), flags)) {
+		for_each_present_cpu(cpu) {
+			if (cpu == smp_processor_id())
+				continue;
+			set_cpu_present(cpu, false);
+		}
+		pr_warn("Failed to set CPU boot address, disabling SMP\n");
+	}
+}
+
+static struct smp_operations smp_msm8660_ops __initdata = {
+	.smp_prepare_cpus	= qcom_smp_prepare_cpus,
+	.smp_secondary_init	= qcom_secondary_init,
+	.smp_boot_secondary	= msm8660_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= qcom_cpu_die,
+#endif
+};
+CPU_METHOD_OF_DECLARE(qcom_smp, "qcom,gcc-msm8660", &smp_msm8660_ops);
+
+static struct smp_operations qcom_smp_kpssv1_ops __initdata = {
+	.smp_prepare_cpus	= qcom_smp_prepare_cpus,
+	.smp_secondary_init	= qcom_secondary_init,
+	.smp_boot_secondary	= kpssv1_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= qcom_cpu_die,
+#endif
+};
+CPU_METHOD_OF_DECLARE(qcom_smp_kpssv1, "qcom,kpss-acc-v1", &qcom_smp_kpssv1_ops);
+
+static struct smp_operations qcom_smp_kpssv2_ops __initdata = {
+	.smp_prepare_cpus	= qcom_smp_prepare_cpus,
+	.smp_secondary_init	= qcom_secondary_init,
+	.smp_boot_secondary	= kpssv2_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= qcom_cpu_die,
+#endif
+};
+CPU_METHOD_OF_DECLARE(qcom_smp_kpssv2, "qcom,kpss-acc-v2", &qcom_smp_kpssv2_ops);
diff --git a/arch/arm/mach-msm/scm-boot.c b/arch/arm/mach-qcom/scm-boot.c
index 45cee3e469a5..45cee3e469a5 100644
--- a/arch/arm/mach-msm/scm-boot.c
+++ b/arch/arm/mach-qcom/scm-boot.c
diff --git a/arch/arm/mach-msm/scm-boot.h b/arch/arm/mach-qcom/scm-boot.h
index 7be32ff5d687..6aabb2428176 100644
--- a/arch/arm/mach-msm/scm-boot.h
+++ b/arch/arm/mach-qcom/scm-boot.h
@@ -13,9 +13,11 @@
 #define __MACH_SCM_BOOT_H
 
 #define SCM_BOOT_ADDR			0x1
-#define SCM_FLAG_COLDBOOT_CPU1		0x1
-#define SCM_FLAG_WARMBOOT_CPU1		0x2
-#define SCM_FLAG_WARMBOOT_CPU0		0x4
+#define SCM_FLAG_COLDBOOT_CPU1		0x01
+#define SCM_FLAG_COLDBOOT_CPU2		0x08
+#define SCM_FLAG_COLDBOOT_CPU3		0x20
+#define SCM_FLAG_WARMBOOT_CPU0		0x04
+#define SCM_FLAG_WARMBOOT_CPU1		0x02
 
 int scm_set_boot_addr(phys_addr_t addr, int flags);
 
diff --git a/arch/arm/mach-msm/scm.c b/arch/arm/mach-qcom/scm.c
index c536fd6bf827..c536fd6bf827 100644
--- a/arch/arm/mach-msm/scm.c
+++ b/arch/arm/mach-qcom/scm.c
diff --git a/arch/arm/mach-msm/scm.h b/arch/arm/mach-qcom/scm.h
index 00b31ea58f29..00b31ea58f29 100644
--- a/arch/arm/mach-msm/scm.h
+++ b/arch/arm/mach-qcom/scm.h