ARM: dts: ventana: add UHS-I support for Ventana boards

UHS-I support is available on Ventana boards with micro-SD sockets depending
on the board revision. To support this pinctl states for 100Mhz and 200MHz
must be added as well as pinmux of the VSELECT signal. In order to support
UHS-I the I/O rail of the 4-bit data bus must be switchable between 1.8V
and 3.3V.

By adding the no-1-8-v property, which disables UHS-I support, we allow the
bootloader to be in charge of selecting which boards have this capability
by removing that property if the board model/revision implement the support.

Additionally we will remove NANDF_CS1 here from the nand pinmux group as the
second chip-select is not used on any ventana boards and this is the pad
that is used for SD3_VELECT.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

6 files changed, 96 insertions, 11 deletions

diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
index f2867c4b34a8..7b31fdb79ced 100644
--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
@@ -248,7 +248,6 @@
 				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
 				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
 				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
 				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
 				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
 				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index b5756c21ea1d..b8e35513aed2 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -316,10 +316,13 @@
 };
 
 &usdhc3 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 	cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
+	no-1-8-v; /* firmware will remove if board revision supports */
 	status = "okay";
 };
 
@@ -380,7 +383,6 @@
 				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
 				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
 				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
 				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
 				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
 				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
@@ -469,7 +471,34 @@
 				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
 				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
 				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00	0x1b0b0 /* CD */
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x170b9
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
 			>;
 		};
 	};
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index 86f03c1b147c..765c3a758ae0 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -322,10 +322,13 @@
 };
 
 &usdhc3 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 	cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
+	no-1-8-v; /* firmware will remove if board revision supports */
 	status = "okay";
 };
 
@@ -385,7 +388,6 @@
 				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
 				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
 				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
 				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
 				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
 				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
@@ -476,7 +478,34 @@
 				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
 				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
 				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0 /* CD */
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
 			>;
 		};
 	};
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index 4a8d97f47759..1100aab4be54 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -415,10 +415,13 @@
 };
 
 &usdhc3 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 	cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
+	no-1-8-v; /* firmware will remove if board revision supports */
 	status = "okay";
 };
 
@@ -478,7 +481,6 @@
 				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
 				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
 				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
 				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
 				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
 				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
@@ -568,6 +570,34 @@
 				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
 				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
 				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
 			>;
 		};
 	};
diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
index d1866a0a2f13..741f3d529e3e 100644
--- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
@@ -250,7 +250,6 @@
 				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
 				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
 				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
 				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
 				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
 				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
index 5c6587f6c420..d1e5048b00b5 100644
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -202,7 +202,6 @@
 				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
 				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
 				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
 				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
 				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
 				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1