summaryrefslogtreecommitdiff
path: root/arch/arm
diff options
context:
space:
mode:
authorThomas Gleixner <tglx@linutronix.de>2017-04-20 17:05:13 +0300
committerThomas Gleixner <tglx@linutronix.de>2017-04-20 17:05:13 +0300
commit7a258ff04f9d5fe549fed6d03931a0236587047e (patch)
tree6b164332c2a3983d972cc4dc47af3fce6cc5dc32 /arch/arm
parent382bd4de61827dbaaf5fb4fb7b1f4be4a86505e7 (diff)
parentf61143c45077df4fa78e2f1ba455a00bbe1d5b8c (diff)
downloadlinux-7a258ff04f9d5fe549fed6d03931a0236587047e.tar.xz
Merge branch 'linus' into irq/core
Pick up upstream fixes to avoid conflicts with pending patches.
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/boot/dts/am335x-baltos.dtsi2
-rw-r--r--arch/arm/boot/dts/am335x-evmsk.dts1
-rw-r--r--arch/arm/boot/dts/dra7.dtsi2
-rw-r--r--arch/arm/boot/dts/logicpd-torpedo-som.dtsi2
-rw-r--r--arch/arm/boot/dts/sun8i-a33.dtsi16
-rw-r--r--arch/arm/kvm/arm.c3
-rw-r--r--arch/arm/kvm/mmu.c23
-rw-r--r--arch/arm/mach-omap2/common.h1
-rw-r--r--arch/arm/mach-omap2/omap-hotplug.c2
-rw-r--r--arch/arm/mach-omap2/omap-mpuss-lowpower.c22
-rw-r--r--arch/arm/mach-omap2/omap-smc.S1
-rw-r--r--arch/arm/mach-omap2/omap-smp.c90
-rw-r--r--arch/arm/mach-omap2/omap_device.c8
-rw-r--r--arch/arm/mach-orion5x/Kconfig1
-rw-r--r--arch/arm/mm/dma-mapping.c20
-rw-r--r--arch/arm/mm/nommu.c5
-rw-r--r--arch/arm/plat-orion/common.c5
-rw-r--r--arch/arm/probes/kprobes/core.c49
-rw-r--r--arch/arm/probes/kprobes/test-core.c11
19 files changed, 216 insertions, 48 deletions
diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi
index efb5eae290a8..d42b98f15e8b 100644
--- a/arch/arm/boot/dts/am335x-baltos.dtsi
+++ b/arch/arm/boot/dts/am335x-baltos.dtsi
@@ -371,6 +371,8 @@
phy1: ethernet-phy@1 {
reg = <7>;
+ eee-broken-100tx;
+ eee-broken-1000t;
};
};
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 9e43c443738a..9ba4b18c0cb2 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -672,6 +672,7 @@
ti,non-removable;
bus-width = <4>;
cap-power-off-card;
+ keep-power-in-suspend;
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 2c9e56f4aac5..bbfb9d5a70a9 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -283,6 +283,7 @@
device_type = "pci";
ranges = <0x81000000 0 0 0x03000 0 0x00010000
0x82000000 0 0x20013000 0x13000 0 0xffed000>;
+ bus-range = <0x00 0xff>;
#interrupt-cells = <1>;
num-lanes = <1>;
linux,pci-domain = <0>;
@@ -319,6 +320,7 @@
device_type = "pci";
ranges = <0x81000000 0 0 0x03000 0 0x00010000
0x82000000 0 0x30013000 0x13000 0 0xffed000>;
+ bus-range = <0x00 0xff>;
#interrupt-cells = <1>;
num-lanes = <1>;
linux,pci-domain = <1>;
diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
index 8f9a69ca818c..efe53998c961 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
+++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
@@ -121,7 +121,7 @@
&i2c3 {
clock-frequency = <400000>;
at24@50 {
- compatible = "at24,24c02";
+ compatible = "atmel,24c64";
readonly;
reg = <0x50>;
};
diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
index 18c174fef84f..306af6cadf26 100644
--- a/arch/arm/boot/dts/sun8i-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -66,12 +66,6 @@
opp-microvolt = <1200000>;
clock-latency-ns = <244144>; /* 8 32k periods */
};
-
- opp@1200000000 {
- opp-hz = /bits/ 64 <1200000000>;
- opp-microvolt = <1320000>;
- clock-latency-ns = <244144>; /* 8 32k periods */
- };
};
cpus {
@@ -81,16 +75,22 @@
operating-points-v2 = <&cpu0_opp_table>;
};
+ cpu@1 {
+ operating-points-v2 = <&cpu0_opp_table>;
+ };
+
cpu@2 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <2>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
cpu@3 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <3>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
};
@@ -113,8 +113,8 @@
simple-audio-card,mclk-fs = <512>;
simple-audio-card,aux-devs = <&codec_analog>;
simple-audio-card,routing =
- "Left DAC", "Digital Left DAC",
- "Right DAC", "Digital Right DAC";
+ "Left DAC", "AIF1 Slot 0 Left",
+ "Right DAC", "AIF1 Slot 0 Right";
status = "disabled";
simple-audio-card,cpu {
diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
index 96dba7cd8be7..314eb6abe1ff 100644
--- a/arch/arm/kvm/arm.c
+++ b/arch/arm/kvm/arm.c
@@ -1124,6 +1124,9 @@ static void cpu_hyp_reinit(void)
if (__hyp_get_vectors() == hyp_default_vectors)
cpu_init_hyp_mode(NULL);
}
+
+ if (vgic_present)
+ kvm_vgic_init_cpu_hardware();
}
static void cpu_hyp_reset(void)
diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c
index 962616fd4ddd..582a972371cf 100644
--- a/arch/arm/kvm/mmu.c
+++ b/arch/arm/kvm/mmu.c
@@ -292,11 +292,18 @@ static void unmap_stage2_range(struct kvm *kvm, phys_addr_t start, u64 size)
phys_addr_t addr = start, end = start + size;
phys_addr_t next;
+ assert_spin_locked(&kvm->mmu_lock);
pgd = kvm->arch.pgd + stage2_pgd_index(addr);
do {
next = stage2_pgd_addr_end(addr, end);
if (!stage2_pgd_none(*pgd))
unmap_stage2_puds(kvm, pgd, addr, next);
+ /*
+ * If the range is too large, release the kvm->mmu_lock
+ * to prevent starvation and lockup detector warnings.
+ */
+ if (next != end)
+ cond_resched_lock(&kvm->mmu_lock);
} while (pgd++, addr = next, addr != end);
}
@@ -803,6 +810,7 @@ void stage2_unmap_vm(struct kvm *kvm)
int idx;
idx = srcu_read_lock(&kvm->srcu);
+ down_read(&current->mm->mmap_sem);
spin_lock(&kvm->mmu_lock);
slots = kvm_memslots(kvm);
@@ -810,6 +818,7 @@ void stage2_unmap_vm(struct kvm *kvm)
stage2_unmap_memslot(kvm, memslot);
spin_unlock(&kvm->mmu_lock);
+ up_read(&current->mm->mmap_sem);
srcu_read_unlock(&kvm->srcu, idx);
}
@@ -829,7 +838,10 @@ void kvm_free_stage2_pgd(struct kvm *kvm)
if (kvm->arch.pgd == NULL)
return;
+ spin_lock(&kvm->mmu_lock);
unmap_stage2_range(kvm, 0, KVM_PHYS_SIZE);
+ spin_unlock(&kvm->mmu_lock);
+
/* Free the HW pgd, one page at a time */
free_pages_exact(kvm->arch.pgd, S2_PGD_SIZE);
kvm->arch.pgd = NULL;
@@ -1801,6 +1813,7 @@ int kvm_arch_prepare_memory_region(struct kvm *kvm,
(KVM_PHYS_SIZE >> PAGE_SHIFT))
return -EFAULT;
+ down_read(&current->mm->mmap_sem);
/*
* A memory region could potentially cover multiple VMAs, and any holes
* between them, so iterate over all of them to find out if we can map
@@ -1844,8 +1857,10 @@ int kvm_arch_prepare_memory_region(struct kvm *kvm,
pa += vm_start - vma->vm_start;
/* IO region dirty page logging not allowed */
- if (memslot->flags & KVM_MEM_LOG_DIRTY_PAGES)
- return -EINVAL;
+ if (memslot->flags & KVM_MEM_LOG_DIRTY_PAGES) {
+ ret = -EINVAL;
+ goto out;
+ }
ret = kvm_phys_addr_ioremap(kvm, gpa, pa,
vm_end - vm_start,
@@ -1857,7 +1872,7 @@ int kvm_arch_prepare_memory_region(struct kvm *kvm,
} while (hva < reg_end);
if (change == KVM_MR_FLAGS_ONLY)
- return ret;
+ goto out;
spin_lock(&kvm->mmu_lock);
if (ret)
@@ -1865,6 +1880,8 @@ int kvm_arch_prepare_memory_region(struct kvm *kvm,
else
stage2_flush_memslot(kvm, memslot);
spin_unlock(&kvm->mmu_lock);
+out:
+ up_read(&current->mm->mmap_sem);
return ret;
}
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index c4f2ace91ea2..3089d3bfa19b 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -270,6 +270,7 @@ extern const struct smp_operations omap4_smp_ops;
extern int omap4_mpuss_init(void);
extern int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state);
extern int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state);
+extern u32 omap4_get_cpu1_ns_pa_addr(void);
#else
static inline int omap4_enter_lowpower(unsigned int cpu,
unsigned int power_state)
diff --git a/arch/arm/mach-omap2/omap-hotplug.c b/arch/arm/mach-omap2/omap-hotplug.c
index d3fb5661bb5d..433db6d0b073 100644
--- a/arch/arm/mach-omap2/omap-hotplug.c
+++ b/arch/arm/mach-omap2/omap-hotplug.c
@@ -50,7 +50,7 @@ void omap4_cpu_die(unsigned int cpu)
omap4_hotplug_cpu(cpu, PWRDM_POWER_OFF);
if (omap_secure_apis_support())
- boot_cpu = omap_read_auxcoreboot0();
+ boot_cpu = omap_read_auxcoreboot0() >> 9;
else
boot_cpu =
readl_relaxed(base + OMAP_AUX_CORE_BOOT_0) >> 5;
diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
index 113ab2dd2ee9..03ec6d307c82 100644
--- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
+++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
@@ -64,6 +64,7 @@
#include "prm-regbits-44xx.h"
static void __iomem *sar_base;
+static u32 old_cpu1_ns_pa_addr;
#if defined(CONFIG_PM) && defined(CONFIG_SMP)
@@ -212,6 +213,11 @@ static void __init save_l2x0_context(void)
{}
#endif
+u32 omap4_get_cpu1_ns_pa_addr(void)
+{
+ return old_cpu1_ns_pa_addr;
+}
+
/**
* omap4_enter_lowpower: OMAP4 MPUSS Low Power Entry Function
* The purpose of this function is to manage low power programming
@@ -460,22 +466,30 @@ int __init omap4_mpuss_init(void)
void __init omap4_mpuss_early_init(void)
{
unsigned long startup_pa;
+ void __iomem *ns_pa_addr;
- if (!(cpu_is_omap44xx() || soc_is_omap54xx()))
+ if (!(soc_is_omap44xx() || soc_is_omap54xx()))
return;
sar_base = omap4_get_sar_ram_base();
- if (cpu_is_omap443x())
+ /* Save old NS_PA_ADDR for validity checks later on */
+ if (soc_is_omap44xx())
+ ns_pa_addr = sar_base + CPU1_WAKEUP_NS_PA_ADDR_OFFSET;
+ else
+ ns_pa_addr = sar_base + OMAP5_CPU1_WAKEUP_NS_PA_ADDR_OFFSET;
+ old_cpu1_ns_pa_addr = readl_relaxed(ns_pa_addr);
+
+ if (soc_is_omap443x())
startup_pa = __pa_symbol(omap4_secondary_startup);
- else if (cpu_is_omap446x())
+ else if (soc_is_omap446x())
startup_pa = __pa_symbol(omap4460_secondary_startup);
else if ((__boot_cpu_mode & MODE_MASK) == HYP_MODE)
startup_pa = __pa_symbol(omap5_secondary_hyp_startup);
else
startup_pa = __pa_symbol(omap5_secondary_startup);
- if (cpu_is_omap44xx())
+ if (soc_is_omap44xx())
writel_relaxed(startup_pa, sar_base +
CPU1_WAKEUP_NS_PA_ADDR_OFFSET);
else
diff --git a/arch/arm/mach-omap2/omap-smc.S b/arch/arm/mach-omap2/omap-smc.S
index fd90125bffc7..72506e6cf9e7 100644
--- a/arch/arm/mach-omap2/omap-smc.S
+++ b/arch/arm/mach-omap2/omap-smc.S
@@ -94,6 +94,5 @@ ENTRY(omap_read_auxcoreboot0)
ldr r12, =0x103
dsb
smc #0
- mov r0, r0, lsr #9
ldmfd sp!, {r2-r12, pc}
ENDPROC(omap_read_auxcoreboot0)
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 003353b0b794..3faf454ba487 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -21,6 +21,7 @@
#include <linux/io.h>
#include <linux/irqchip/arm-gic.h>
+#include <asm/sections.h>
#include <asm/smp_scu.h>
#include <asm/virt.h>
@@ -40,10 +41,14 @@
#define OMAP5_CORE_COUNT 0x2
+#define AUX_CORE_BOOT0_GP_RELEASE 0x020
+#define AUX_CORE_BOOT0_HS_RELEASE 0x200
+
struct omap_smp_config {
unsigned long cpu1_rstctrl_pa;
void __iomem *cpu1_rstctrl_va;
void __iomem *scu_base;
+ void __iomem *wakeupgen_base;
void *startup_addr;
};
@@ -140,7 +145,6 @@ static int omap4_boot_secondary(unsigned int cpu, struct task_struct *idle)
static struct clockdomain *cpu1_clkdm;
static bool booted;
static struct powerdomain *cpu1_pwrdm;
- void __iomem *base = omap_get_wakeupgen_base();
/*
* Set synchronisation state between this boot processor
@@ -155,9 +159,11 @@ static int omap4_boot_secondary(unsigned int cpu, struct task_struct *idle)
* A barrier is added to ensure that write buffer is drained
*/
if (omap_secure_apis_support())
- omap_modify_auxcoreboot0(0x200, 0xfffffdff);
+ omap_modify_auxcoreboot0(AUX_CORE_BOOT0_HS_RELEASE,
+ 0xfffffdff);
else
- writel_relaxed(0x20, base + OMAP_AUX_CORE_BOOT_0);
+ writel_relaxed(AUX_CORE_BOOT0_GP_RELEASE,
+ cfg.wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
if (!cpu1_clkdm && !cpu1_pwrdm) {
cpu1_clkdm = clkdm_lookup("mpu1_clkdm");
@@ -261,9 +267,72 @@ static void __init omap4_smp_init_cpus(void)
set_cpu_possible(i, true);
}
+/*
+ * For now, just make sure the start-up address is not within the booting
+ * kernel space as that means we just overwrote whatever secondary_startup()
+ * code there was.
+ */
+static bool __init omap4_smp_cpu1_startup_valid(unsigned long addr)
+{
+ if ((addr >= __pa(PAGE_OFFSET)) && (addr <= __pa(__bss_start)))
+ return false;
+
+ return true;
+}
+
+/*
+ * We may need to reset CPU1 before configuring, otherwise kexec boot can end
+ * up trying to use old kernel startup address or suspend-resume will
+ * occasionally fail to bring up CPU1 on 4430 if CPU1 fails to enter deeper
+ * idle states.
+ */
+static void __init omap4_smp_maybe_reset_cpu1(struct omap_smp_config *c)
+{
+ unsigned long cpu1_startup_pa, cpu1_ns_pa_addr;
+ bool needs_reset = false;
+ u32 released;
+
+ if (omap_secure_apis_support())
+ released = omap_read_auxcoreboot0() & AUX_CORE_BOOT0_HS_RELEASE;
+ else
+ released = readl_relaxed(cfg.wakeupgen_base +
+ OMAP_AUX_CORE_BOOT_0) &
+ AUX_CORE_BOOT0_GP_RELEASE;
+ if (released) {
+ pr_warn("smp: CPU1 not parked?\n");
+
+ return;
+ }
+
+ cpu1_startup_pa = readl_relaxed(cfg.wakeupgen_base +
+ OMAP_AUX_CORE_BOOT_1);
+ cpu1_ns_pa_addr = omap4_get_cpu1_ns_pa_addr();
+
+ /* Did the configured secondary_startup() get overwritten? */
+ if (!omap4_smp_cpu1_startup_valid(cpu1_startup_pa))
+ needs_reset = true;
+
+ /*
+ * If omap4 or 5 has NS_PA_ADDR configured, CPU1 may be in a
+ * deeper idle state in WFI and will wake to an invalid address.
+ */
+ if ((soc_is_omap44xx() || soc_is_omap54xx()) &&
+ !omap4_smp_cpu1_startup_valid(cpu1_ns_pa_addr))
+ needs_reset = true;
+
+ if (!needs_reset || !c->cpu1_rstctrl_va)
+ return;
+
+ pr_info("smp: CPU1 parked within kernel, needs reset (0x%lx 0x%lx)\n",
+ cpu1_startup_pa, cpu1_ns_pa_addr);
+
+ writel_relaxed(1, c->cpu1_rstctrl_va);
+ readl_relaxed(c->cpu1_rstctrl_va);
+ writel_relaxed(0, c->cpu1_rstctrl_va);
+}
+
static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
{
- void __iomem *base = omap_get_wakeupgen_base();
const struct omap_smp_config *c = NULL;
if (soc_is_omap443x())
@@ -281,6 +350,7 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
/* Must preserve cfg.scu_base set earlier */
cfg.cpu1_rstctrl_pa = c->cpu1_rstctrl_pa;
cfg.startup_addr = c->startup_addr;
+ cfg.wakeupgen_base = omap_get_wakeupgen_base();
if (soc_is_dra74x() || soc_is_omap54xx()) {
if ((__boot_cpu_mode & MODE_MASK) == HYP_MODE)
@@ -299,15 +369,7 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
if (cfg.scu_base)
scu_enable(cfg.scu_base);
- /*
- * Reset CPU1 before configuring, otherwise kexec will
- * end up trying to use old kernel startup address.
- */
- if (cfg.cpu1_rstctrl_va) {
- writel_relaxed(1, cfg.cpu1_rstctrl_va);
- readl_relaxed(cfg.cpu1_rstctrl_va);
- writel_relaxed(0, cfg.cpu1_rstctrl_va);
- }
+ omap4_smp_maybe_reset_cpu1(&cfg);
/*
* Write the address of secondary startup routine into the
@@ -319,7 +381,7 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
omap_auxcoreboot_addr(__pa_symbol(cfg.startup_addr));
else
writel_relaxed(__pa_symbol(cfg.startup_addr),
- base + OMAP_AUX_CORE_BOOT_1);
+ cfg.wakeupgen_base + OMAP_AUX_CORE_BOOT_1);
}
const struct smp_operations omap4_smp_ops __initconst = {
diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index e920dd83e443..f989145480c8 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -222,6 +222,14 @@ static int _omap_device_notifier_call(struct notifier_block *nb,
dev_err(dev, "failed to idle\n");
}
break;
+ case BUS_NOTIFY_BIND_DRIVER:
+ od = to_omap_device(pdev);
+ if (od && (od->_state == OMAP_DEVICE_STATE_ENABLED) &&
+ pm_runtime_status_suspended(dev)) {
+ od->_driver_status = BUS_NOTIFY_BIND_DRIVER;
+ pm_runtime_set_active(dev);
+ }
+ break;
case BUS_NOTIFY_ADD_DEVICE:
if (pdev->dev.of_node)
omap_device_build_from_dt(pdev);
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index 633442ad4e4c..2a7bb6ccdcb7 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -6,6 +6,7 @@ menuconfig ARCH_ORION5X
select GPIOLIB
select MVEBU_MBUS
select PCI
+ select PHYLIB if NETDEVICES
select PLAT_ORION_LEGACY
help
Support for the following Marvell Orion 5x series SoCs:
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 63eabb06f9f1..475811f5383a 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -935,13 +935,31 @@ static void arm_coherent_dma_free(struct device *dev, size_t size, void *cpu_add
__arm_dma_free(dev, size, cpu_addr, handle, attrs, true);
}
+/*
+ * The whole dma_get_sgtable() idea is fundamentally unsafe - it seems
+ * that the intention is to allow exporting memory allocated via the
+ * coherent DMA APIs through the dma_buf API, which only accepts a
+ * scattertable. This presents a couple of problems:
+ * 1. Not all memory allocated via the coherent DMA APIs is backed by
+ * a struct page
+ * 2. Passing coherent DMA memory into the streaming APIs is not allowed
+ * as we will try to flush the memory through a different alias to that
+ * actually being used (and the flushes are redundant.)
+ */
int arm_dma_get_sgtable(struct device *dev, struct sg_table *sgt,
void *cpu_addr, dma_addr_t handle, size_t size,
unsigned long attrs)
{
- struct page *page = pfn_to_page(dma_to_pfn(dev, handle));
+ unsigned long pfn = dma_to_pfn(dev, handle);
+ struct page *page;
int ret;
+ /* If the PFN is not valid, we do not have a struct page */
+ if (!pfn_valid(pfn))
+ return -ENXIO;
+
+ page = pfn_to_page(pfn);
+
ret = sg_alloc_table(sgt, 1, GFP_KERNEL);
if (unlikely(ret))
return ret;
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index 3b5c7aaf9c76..33a45bd96860 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -303,7 +303,10 @@ static inline void set_vbar(unsigned long val)
*/
static inline bool security_extensions_enabled(void)
{
- return !!cpuid_feature_extract(CPUID_EXT_PFR1, 4);
+ /* Check CPUID Identification Scheme before ID_PFR1 read */
+ if ((read_cpuid_id() & 0x000f0000) == 0x000f0000)
+ return !!cpuid_feature_extract(CPUID_EXT_PFR1, 4);
+ return 0;
}
static unsigned long __init setup_vectors_base(void)
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index 9255b6d67ba5..aff6994950ba 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -468,6 +468,7 @@ void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
eth_data, &orion_ge11);
}
+#ifdef CONFIG_ARCH_ORION5X
/*****************************************************************************
* Ethernet switch
****************************************************************************/
@@ -480,6 +481,9 @@ void __init orion_ge00_switch_init(struct dsa_chip_data *d)
struct mdio_board_info *bd;
unsigned int i;
+ if (!IS_BUILTIN(CONFIG_PHYLIB))
+ return;
+
for (i = 0; i < ARRAY_SIZE(d->port_names); i++)
if (!strcmp(d->port_names[i], "cpu"))
break;
@@ -493,6 +497,7 @@ void __init orion_ge00_switch_init(struct dsa_chip_data *d)
mdiobus_register_board_info(&orion_ge00_switch_board_info, 1);
}
+#endif
/*****************************************************************************
* I2C
diff --git a/arch/arm/probes/kprobes/core.c b/arch/arm/probes/kprobes/core.c
index b6dc9d838a9a..ad1f4e6a9e33 100644
--- a/arch/arm/probes/kprobes/core.c
+++ b/arch/arm/probes/kprobes/core.c
@@ -266,11 +266,20 @@ void __kprobes kprobe_handler(struct pt_regs *regs)
#endif
if (p) {
- if (cur) {
+ if (!p->ainsn.insn_check_cc(regs->ARM_cpsr)) {
+ /*
+ * Probe hit but conditional execution check failed,
+ * so just skip the instruction and continue as if
+ * nothing had happened.
+ * In this case, we can skip recursing check too.
+ */
+ singlestep_skip(p, regs);
+ } else if (cur) {
/* Kprobe is pending, so we're recursing. */
switch (kcb->kprobe_status) {
case KPROBE_HIT_ACTIVE:
case KPROBE_HIT_SSDONE:
+ case KPROBE_HIT_SS:
/* A pre- or post-handler probe got us here. */
kprobes_inc_nmissed_count(p);
save_previous_kprobe(kcb);
@@ -279,11 +288,16 @@ void __kprobes kprobe_handler(struct pt_regs *regs)
singlestep(p, regs, kcb);
restore_previous_kprobe(kcb);
break;
+ case KPROBE_REENTER:
+ /* A nested probe was hit in FIQ, it is a BUG */
+ pr_warn("Unrecoverable kprobe detected at %p.\n",
+ p->addr);
+ /* fall through */
default:
/* impossible cases */
BUG();
}
- } else if (p->ainsn.insn_check_cc(regs->ARM_cpsr)) {
+ } else {
/* Probe hit and conditional execution check ok. */
set_current_kprobe(p);
kcb->kprobe_status = KPROBE_HIT_ACTIVE;
@@ -304,13 +318,6 @@ void __kprobes kprobe_handler(struct pt_regs *regs)
}
reset_current_kprobe();
}
- } else {
- /*
- * Probe hit but conditional execution check failed,
- * so just skip the instruction and continue as if
- * nothing had happened.
- */
- singlestep_skip(p, regs);
}
} else if (cur) {
/* We probably hit a jprobe. Call its break handler. */
@@ -434,6 +441,7 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
struct hlist_node *tmp;
unsigned long flags, orig_ret_address = 0;
unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline;
+ kprobe_opcode_t *correct_ret_addr = NULL;
INIT_HLIST_HEAD(&empty_rp);
kretprobe_hash_lock(current, &head, &flags);
@@ -456,14 +464,34 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
/* another task is sharing our hash bucket */
continue;
+ orig_ret_address = (unsigned long)ri->ret_addr;
+
+ if (orig_ret_address != trampoline_address)
+ /*
+ * This is the real return address. Any other
+ * instances associated with this task are for
+ * other calls deeper on the call stack
+ */
+ break;
+ }
+
+ kretprobe_assert(ri, orig_ret_address, trampoline_address);
+
+ correct_ret_addr = ri->ret_addr;
+ hlist_for_each_entry_safe(ri, tmp, head, hlist) {
+ if (ri->task != current)
+ /* another task is sharing our hash bucket */
+ continue;
+
+ orig_ret_address = (unsigned long)ri->ret_addr;
if (ri->rp && ri->rp->handler) {
__this_cpu_write(current_kprobe, &ri->rp->kp);
get_kprobe_ctlblk()->kprobe_status = KPROBE_HIT_ACTIVE;
+ ri->ret_addr = correct_ret_addr;
ri->rp->handler(ri, regs);
__this_cpu_write(current_kprobe, NULL);
}
- orig_ret_address = (unsigned long)ri->ret_addr;
recycle_rp_inst(ri, &empty_rp);
if (orig_ret_address != trampoline_address)
@@ -475,7 +503,6 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
break;
}
- kretprobe_assert(ri, orig_ret_address, trampoline_address);
kretprobe_hash_unlock(current, &flags);
hlist_for_each_entry_safe(ri, tmp, &empty_rp, hlist) {
diff --git a/arch/arm/probes/kprobes/test-core.c b/arch/arm/probes/kprobes/test-core.c
index c893726aa52d..1c98a87786ca 100644
--- a/arch/arm/probes/kprobes/test-core.c
+++ b/arch/arm/probes/kprobes/test-core.c
@@ -977,7 +977,10 @@ static void coverage_end(void)
void __naked __kprobes_test_case_start(void)
{
__asm__ __volatile__ (
- "stmdb sp!, {r4-r11} \n\t"
+ "mov r2, sp \n\t"
+ "bic r3, r2, #7 \n\t"
+ "mov sp, r3 \n\t"
+ "stmdb sp!, {r2-r11} \n\t"
"sub sp, sp, #"__stringify(TEST_MEMORY_SIZE)"\n\t"
"bic r0, lr, #1 @ r0 = inline data \n\t"
"mov r1, sp \n\t"
@@ -997,7 +1000,8 @@ void __naked __kprobes_test_case_end_32(void)
"movne pc, r0 \n\t"
"mov r0, r4 \n\t"
"add sp, sp, #"__stringify(TEST_MEMORY_SIZE)"\n\t"
- "ldmia sp!, {r4-r11} \n\t"
+ "ldmia sp!, {r2-r11} \n\t"
+ "mov sp, r2 \n\t"
"mov pc, r0 \n\t"
);
}
@@ -1013,7 +1017,8 @@ void __naked __kprobes_test_case_end_16(void)
"bxne r0 \n\t"
"mov r0, r4 \n\t"
"add sp, sp, #"__stringify(TEST_MEMORY_SIZE)"\n\t"
- "ldmia sp!, {r4-r11} \n\t"
+ "ldmia sp!, {r2-r11} \n\t"
+ "mov sp, r2 \n\t"
"bx r0 \n\t"
);
}