Merge tag 'qcom-dts-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm DTS more changes for v5.16

The multi-purpose-pin (MPP) driver is finally migrated to use
hierarchical IRQ domains, so this bring the associated changes.

The remainder of the changes are correcting binding issues, primarily
found through DT validation.

* tag 'qcom-dts-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (26 commits)
  ARM: dts: qcom: fix typo in IPQ8064 thermal-sensor node
  ARM: dts: qcom: fix thermal zones naming
  ARM: dts: qcom: fix flash node naming for RB3011
  ARM: dts: qcom: correct mmc node naming
  ARM: dts: qcom: fix memory and mdio nodes naming for RB3011
  dt-bindings: arm: qcom: Fix Nexus 4 vendor prefix
  ARM: dts: ipq4019-ap.dk01.1-c1: add device compatible in the dts
  dt-bindings: arm: qcom-ipq4019: add missing device compatible
  ARM: dts: qcom: apq8026-lg-lenok: rename board vendor
  dt-bindings: arm: qcom: rename vendor of apq8026-lenok
  ARM: dts: qcom: sdx55: Drop '#clock-cells' from QMP PHY node
  ARM: dts: qcom: mdm9615: fix memory node for Sierra Wireless WP8548
  ARM: dts: qcom-pma8084: add interrupt controller properties
  ARM: dts: qcom-pm8941: add interrupt controller properties
  ARM: dts: qcom-pm8841: add interrupt controller properties
  ARM: dts: qcom-msm8660: add interrupt controller properties
  ARM: dts: qcom-mdm9615: add interrupt controller properties
  ARM: dts: qcom-apq8064: add interrupt controller properties
  ARM: dts: qcom-apq8060-dragonboard: fix mpps state names
  ARM: dts: qcom-mdm9615: add gpio-ranges to mpps node, fix its name
  ...

Link: https://lore.kernel.org/r/20211026135855.1205262-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

24 files changed, 91 insertions, 130 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 52f4fe6214d5..756fedaca5eb 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -954,7 +954,7 @@ dtb-$(CONFIG_ARCH_OXNAS) += \
 	ox810se-wd-mbwe.dtb \
 	ox820-cloudengines-pogoplug-series-3.dtb
 dtb-$(CONFIG_ARCH_QCOM) += \
-	qcom-apq8026-lge-lenok.dtb \
+	qcom-apq8026-lg-lenok.dtb \
 	qcom-apq8060-dragonboard.dtb \
 	qcom-apq8064-cm-qs600.dtb \
 	qcom-apq8064-ifc6410.dtb \
diff --git a/arch/arm/boot/dts/qcom-apq8026-lge-lenok.dts b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
index bdc06e52d283..f350c4e8c194 100644
--- a/arch/arm/boot/dts/qcom-apq8026-lge-lenok.dts
+++ b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
@@ -10,7 +10,7 @@
 
 / {
 	model = "LG G Watch R";
-	compatible = "lge,lenok", "qcom,apq8026";
+	compatible = "lg,lenok", "qcom,apq8026";
 	qcom,board-id = <132 0x0a>;
 	qcom,msm-id = <199 0x20000>;
 
diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
index e1189e929ee6..d664ccd454c5 100644
--- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
@@ -357,8 +357,8 @@
 				};
 
 				mpps@50 {
-					dragon_cm3605_mpps: cm3605-mpps {
-						pinconf {
+					dragon_cm3605_mpps: cm3605-mpps-state {
+						mpp5 {
 							pins = "mpp5";
 							function = "analog";
 							input-enable;
@@ -899,7 +899,7 @@
 		};
 		amba {
 			/* Internal 3.69 GiB eMMC */
-			sdcc@12400000 {
+			mmc@12400000 {
 				status = "okay";
 				pinctrl-names = "default";
 				pinctrl-0 = <&dragon_sdcc1_pins>;
@@ -908,7 +908,7 @@
 			};
 
 			/* External micro SD card, directly connected, pulled up to 2.85 V */
-			sdcc@12180000 {
+			mmc@12180000 {
 				status = "okay";
 				/* Enable SSBI GPIO 22 as input, use for card detect */
 				pinctrl-names = "default";
@@ -922,7 +922,7 @@
 			 * Second external micro SD card, using two TXB104RGYR levelshifters
 			 * to lift from 1.8 V to 2.85 V
 			 */
-			sdcc@12200000 {
+			mmc@12200000 {
 				status = "okay";
 				/* Enable SSBI GPIO 26 as input, use for card detect */
 				pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
index 3bce47d16ab3..9a835335bf78 100644
--- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
@@ -335,7 +335,7 @@
 
 		amba {
 			/* eMMC */
-			sdcc@12400000 {
+			mmc@12400000 {
 				status = "okay";
 				vmmc-supply = <&pm8921_l5>;
 				vqmmc-supply = <&pm8921_s4>;
diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
index 0148148a8e0a..e068a8d0adf0 100644
--- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -220,14 +220,14 @@
 
 		amba {
 			/* eMMC */
-			sdcc1: sdcc@12400000 {
+			sdcc1: mmc@12400000 {
 				status = "okay";
 				vmmc-supply = <&pm8921_l5>;
 				vqmmc-supply = <&pm8921_s4>;
 			};
 
 			/* External micro SD card */
-			sdcc3: sdcc@12180000 {
+			sdcc3: mmc@12180000 {
 				status = "okay";
 				vmmc-supply = <&v3p3_fixed>;
 				pinctrl-names	= "default";
@@ -235,7 +235,7 @@
 				cd-gpios	= <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
 			};
 			/* WLAN */
-			sdcc4: sdcc@121c0000 {
+			sdcc4: mmc@121c0000 {
 				status = "okay";
 				vmmc-supply = <&v3p3_fixed>;
 				vqmmc-supply = <&v3p3_fixed>;
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index d0a17b5a5fa3..2638b380be20 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -314,14 +314,14 @@
 
 		amba {
 			/* eMMC */
-			sdcc1: sdcc@12400000 {
+			sdcc1: mmc@12400000 {
 				status = "okay";
 				vmmc-supply = <&pm8921_l5>;
 				vqmmc-supply = <&pm8921_s4>;
 			};
 
 			/* External micro SD card */
-			sdcc3: sdcc@12180000 {
+			sdcc3: mmc@12180000 {
 				status = "okay";
 				vmmc-supply = <&pm8921_l6>;
 				pinctrl-names	= "default";
@@ -329,7 +329,7 @@
 				cd-gpios	= <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
 			};
 			/* WLAN */
-			sdcc4: sdcc@121c0000 {
+			sdcc4: mmc@121c0000 {
 				status = "okay";
 				vmmc-supply = <&ext_3p3v>;
 				vqmmc-supply = <&pm8921_lvs1>;
diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
index 72e47bdc5c12..f8c97efc61fc 100644
--- a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
@@ -374,14 +374,14 @@
 		};
 
 		amba {
-			sdcc1: sdcc@12400000 {
+			sdcc1: mmc@12400000 {
 				status = "okay";
 
 				vmmc-supply = <&pm8921_l5>;
 				vqmmc-supply = <&pm8921_s4>;
 			};
 
-			sdcc3: sdcc@12180000 {
+			sdcc3: mmc@12180000 {
 				status = "okay";
 
 				vmmc-supply = <&pm8921_l6>;
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 353fdbd52804..030af538c025 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -101,7 +101,7 @@
 	};
 
 	thermal-zones {
-		cpu-thermal0 {
+		cpu0-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
@@ -122,7 +122,7 @@
 			};
 		};
 
-		cpu-thermal1 {
+		cpu1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
@@ -143,7 +143,7 @@
 			};
 		};
 
-		cpu-thermal2 {
+		cpu2-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
@@ -164,7 +164,7 @@
 			};
 		};
 
-		cpu-thermal3 {
+		cpu3-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
@@ -683,12 +683,11 @@
 				pm8821_mpps: mpps@50 {
 					compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp";
 					reg = <0x50>;
-					interrupts = <24 IRQ_TYPE_NONE>,
-						     <25 IRQ_TYPE_NONE>,
-						     <26 IRQ_TYPE_NONE>,
-						     <27 IRQ_TYPE_NONE>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
 					gpio-controller;
 					#gpio-cells = <2>;
+					gpio-ranges = <&pm8821_mpps 0 0 4>;
 				};
 			};
 		};
@@ -726,19 +725,9 @@
 					reg = <0x50>;
 					gpio-controller;
 					#gpio-cells = <2>;
-					interrupts =
-					<128 IRQ_TYPE_NONE>,
-					<129 IRQ_TYPE_NONE>,
-					<130 IRQ_TYPE_NONE>,
-					<131 IRQ_TYPE_NONE>,
-					<132 IRQ_TYPE_NONE>,
-					<133 IRQ_TYPE_NONE>,
-					<134 IRQ_TYPE_NONE>,
-					<135 IRQ_TYPE_NONE>,
-					<136 IRQ_TYPE_NONE>,
-					<137 IRQ_TYPE_NONE>,
-					<138 IRQ_TYPE_NONE>,
-					<139 IRQ_TYPE_NONE>;
+					gpio-ranges = <&pm8921_mpps 0 0 12>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
 				};
 
 				rtc@11d {
@@ -1084,7 +1073,7 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
-			sdcc1: sdcc@12400000 {
+			sdcc1: mmc@12400000 {
 				status		= "disabled";
 				compatible	= "arm,pl18x", "arm,primecell";
 				pinctrl-names	= "default";
@@ -1104,7 +1093,7 @@
 				dma-names = "tx", "rx";
 			};
 
-			sdcc3: sdcc@12180000 {
+			sdcc3: mmc@12180000 {
 				compatible	= "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
 				status		= "disabled";
@@ -1122,7 +1111,7 @@
 				dma-names = "tx", "rx";
 			};
 
-			sdcc4: sdcc@121c0000 {
+			sdcc4: mmc@121c0000 {
 				compatible	= "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
 				status		= "disabled";
@@ -1424,9 +1413,9 @@
 			clocks = <&mmcc HDMI_APP_CLK>,
 				 <&mmcc HDMI_M_AHB_CLK>,
 				 <&mmcc HDMI_S_AHB_CLK>;
-			clock-names = "core_clk",
-				      "master_iface_clk",
-				      "slave_iface_clk";
+			clock-names = "core",
+				      "master_iface",
+				      "slave_iface";
 
 			phys = <&hdmi_phy>;
 			phy-names = "hdmi-phy";
@@ -1457,7 +1446,7 @@
 				    "hdmi_pll";
 
 			clocks = <&mmcc HDMI_S_AHB_CLK>;
-			clock-names = "slave_iface_clk";
+			clock-names = "slave_iface";
 			#phy-cells = <0>;
 		};
 
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
index bf6a03506b45..52240fc7a1a6 100644
--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -102,7 +102,7 @@
 	};
 
 	thermal-zones {
-		cpu-thermal0 {
+		cpu0-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
@@ -122,7 +122,7 @@
 			};
 		};
 
-		cpu-thermal1 {
+		cpu1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
@@ -142,7 +142,7 @@
 			};
 		};
 
-		cpu-thermal2 {
+		cpu2-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
@@ -162,7 +162,7 @@
 			};
 		};
 
-		cpu-thermal3 {
+		cpu3-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
index 0d92f1bc3a13..ddaa273f72ca 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
@@ -18,5 +18,5 @@
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1";
-
+	compatible = "qcom,ipq4019-ap-dk01.1-c1", "qcom,ipq4019";
 };
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
index c93b2164db44..0c10d9e096db 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
@@ -18,7 +18,6 @@
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1";
-	compatible = "qcom,ipq4019";
 
 	aliases {
 		serial0 = &blsp1_uart1;
diff --git a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
index f7ea2e5dd191..596d129d4a95 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
@@ -19,12 +19,12 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory@0 {
+	memory@42000000 {
 		reg = <0x42000000 0x3e000000>;
 		device_type = "memory";
 	};
 
-	mdio0: mdio@0 {
+	mdio0: mdio-0 {
 		status = "okay";
 		compatible = "virtual,mdio-gpio";
 		gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
@@ -91,7 +91,7 @@
 		};
 	};
 
-	mdio1: mdio@1 {
+	mdio1: mdio-1 {
 		status = "okay";
 		compatible = "virtual,mdio-gpio";
 		gpios = <&qcom_pinmux 11 GPIO_ACTIVE_HIGH>,
@@ -172,7 +172,7 @@
 
 				cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
 
-				norflash: s25fl016k@0 {
+				norflash: flash@0 {
 					compatible = "jedec,spi-nor";
 					#address-cells = <1>;
 					#size-cells = <1>;
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 4139d3817bd6..11481313bdb6 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -49,7 +49,7 @@
 	};
 
 	thermal-zones {
-		tsens_tz_sensor0 {
+		sensor0-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&tsens 0>;
@@ -69,7 +69,7 @@
 			};
 		};
 
-		tsens_tz_sensor1 {
+		sensor1-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&tsens 1>;
@@ -89,7 +89,7 @@
 			};
 		};
 
-		tsens_tz_sensor2 {
+		sensor2-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&tsens 2>;
@@ -109,7 +109,7 @@
 			};
 		};
 
-		tsens_tz_sensor3 {
+		sensor3-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&tsens 3>;
@@ -129,7 +129,7 @@
 			};
 		};
 
-		tsens_tz_sensor4 {
+		sensor4-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&tsens 4>;
@@ -149,7 +149,7 @@
 			};
 		};
 
-		tsens_tz_sensor5 {
+		sensor5-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&tsens 5>;
@@ -169,7 +169,7 @@
 			};
 		};
 
-		tsens_tz_sensor6 {
+		sensor6-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&tsens 6>;
@@ -189,7 +189,7 @@
 			};
 		};
 
-		tsens_tz_sensor7 {
+		sensor7-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&tsens 7>;
@@ -209,7 +209,7 @@
 			};
 		};
 
-		tsens_tz_sensor8 {
+		sensor8-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&tsens 8>;
@@ -229,7 +229,7 @@
 			};
 		};
 
-		tsens_tz_sensor9 {
+		sensor9-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&tsens 9>;
@@ -249,7 +249,7 @@
 			};
 		};
 
-		tsens_tz_sensor10 {
+		sensor10-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&tsens 10>;
@@ -1181,7 +1181,7 @@
 			#size-cells = <1>;
 			ranges;
 
-			sdcc1: sdcc@12400000 {
+			sdcc1: mmc@12400000 {
 				status          = "disabled";
 				compatible      = "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
@@ -1201,7 +1201,7 @@
 				dma-names = "tx", "rx";
 			};
 
-			sdcc3: sdcc@12180000 {
+			sdcc3: mmc@12180000 {
 				compatible      = "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
 				status          = "disabled";
diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
index a725b73b5a2e..10ad929759ed 100644
--- a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
@@ -49,7 +49,7 @@
 	model = "Sierra Wireless WP8548 Module";
 	compatible = "swir,wp8548", "qcom,mdm9615";
 
-	memory {
+	memory@48000000 {
 		device_type = "memory";
 		reg = <0x48000000 0x7F00000>;
 	};
diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
index dda2ceec6591..c32415f0e66d 100644
--- a/arch/arm/boot/dts/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
@@ -300,18 +300,14 @@
 					pull-up;
 				};
 
-				pmicmpp: mpp@50 {
+				pmicmpp: mpps@50 {
 					compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
-					interrupt-parent = <&pmicintc>;
-					interrupts = <24 IRQ_TYPE_NONE>,
-						     <25 IRQ_TYPE_NONE>,
-						     <26 IRQ_TYPE_NONE>,
-						     <27 IRQ_TYPE_NONE>,
-						     <28 IRQ_TYPE_NONE>,
-						     <29 IRQ_TYPE_NONE>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
 					reg = <0x50>;
 					gpio-controller;
 					#gpio-cells = <2>;
+					gpio-ranges = <&pmicmpp 0 0 6>;
 				};
 
 				rtc@11d {
@@ -358,7 +354,7 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
-			sdcc1: sdcc@12180000 {
+			sdcc1: mmc@12180000 {
 				status = "disabled";
 				compatible = "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
@@ -378,7 +374,7 @@
 				assigned-clock-rates = <400000>;
 			};
 
-			sdcc2: sdcc@12140000 {
+			sdcc2: mmc@12140000 {
 				compatible = "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
 				status = "disabled";
diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts
index 6a321ccb0bd0..414280d9bdba 100644
--- a/arch/arm/boot/dts/qcom-msm8660-surf.dts
+++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts
@@ -35,13 +35,13 @@
 
 		amba {
 			/* eMMC */
-			sdcc1: sdcc@12400000 {
+			sdcc1: mmc@12400000 {
 				status = "okay";
 				vmmc-supply = <&vsdcc_fixed>;
 			};
 
 			/* External micro SD card */
-			sdcc3: sdcc@12180000 {
+			sdcc3: mmc@12180000 {
 				status = "okay";
 				vmmc-supply = <&vsdcc_fixed>;
 			};
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index 480fc08cbe8e..1e8aab357f9c 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -307,20 +307,9 @@
 					reg = <0x50>;
 					gpio-controller;
 					#gpio-cells = <2>;
-					interrupt-parent = <&pm8058>;
-					interrupts =
-					<128 IRQ_TYPE_NONE>,
-					<129 IRQ_TYPE_NONE>,
-					<130 IRQ_TYPE_NONE>,
-					<131 IRQ_TYPE_NONE>,
-					<132 IRQ_TYPE_NONE>,
-					<133 IRQ_TYPE_NONE>,
-					<134 IRQ_TYPE_NONE>,
-					<135 IRQ_TYPE_NONE>,
-					<136 IRQ_TYPE_NONE>,
-					<137 IRQ_TYPE_NONE>,
-					<138 IRQ_TYPE_NONE>,
-					<139 IRQ_TYPE_NONE>;
+					gpio-ranges = <&pm8058_mpps 0 0 12>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
 				};
 
 				pwrkey@1c {
@@ -494,7 +483,7 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
-			sdcc1: sdcc@12400000 {
+			sdcc1: mmc@12400000 {
 				status		= "disabled";
 				compatible	= "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
@@ -510,7 +499,7 @@
 				cap-mmc-highspeed;
 			};
 
-			sdcc2: sdcc@12140000 {
+			sdcc2: mmc@12140000 {
 				status		= "disabled";
 				compatible	= "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
@@ -525,7 +514,7 @@
 				cap-mmc-highspeed;
 			};
 
-			sdcc3: sdcc@12180000 {
+			sdcc3: mmc@12180000 {
 				compatible	= "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
 				status		= "disabled";
@@ -541,7 +530,7 @@
 				no-1-8-v;
 			};
 
-			sdcc4: sdcc@121c0000 {
+			sdcc4: mmc@121c0000 {
 				compatible	= "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
 				status		= "disabled";
@@ -556,7 +545,7 @@
 				cap-mmc-highspeed;
 			};
 
-			sdcc5: sdcc@12200000 {
+			sdcc5: mmc@12200000 {
 				compatible	= "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
 				status		= "disabled";
diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
index e7d2e937ea4c..4af01039c3b2 100644
--- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
@@ -26,12 +26,12 @@
 
 		amba {
 			/* eMMC */
-			sdcc1: sdcc@12400000 {
+			sdcc1: mmc@12400000 {
 				status = "okay";
 			};
 
 			/* External micro SD card */
-			sdcc3: sdcc@12180000 {
+			sdcc3: mmc@12180000 {
 				status = "okay";
 			};
 		};
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
index 172ea3c70eac..2a0ec97a264f 100644
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -263,7 +263,7 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
-			sdcc1: sdcc@12400000 {
+			sdcc1: mmc@12400000 {
 				status		= "disabled";
 				compatible	= "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
@@ -280,7 +280,7 @@
 				vmmc-supply = <&vsdcc_fixed>;
 			};
 
-			sdcc3: sdcc@12180000 {
+			sdcc3: mmc@12180000 {
 				compatible	= "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
 				status		= "disabled";
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 2b01bc29ddf2..412d94736c35 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -142,7 +142,7 @@
 	};
 
 	thermal-zones {
-		cpu-thermal0 {
+		cpu0-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
@@ -162,7 +162,7 @@
 			};
 		};
 
-		cpu-thermal1 {
+		cpu1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
@@ -182,7 +182,7 @@
 			};
 		};
 
-		cpu-thermal2 {
+		cpu2-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
@@ -202,7 +202,7 @@
 			};
 		};
 
-		cpu-thermal3 {
+		cpu3-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
@@ -282,7 +282,7 @@
 			};
 		};
 
-		gpu-thermal-top {
+		gpu-top-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
@@ -297,7 +297,7 @@
 			};
 		};
 
-		gpu-thermal-bottom {
+		gpu-bottom-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
diff --git a/arch/arm/boot/dts/qcom-pm8841.dtsi b/arch/arm/boot/dts/qcom-pm8841.dtsi
index 2fd59c440903..2caf71eacb52 100644
--- a/arch/arm/boot/dts/qcom-pm8841.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8841.dtsi
@@ -15,10 +15,9 @@
 			reg = <0xa000>;
 			gpio-controller;
 			#gpio-cells = <2>;
-			interrupts = <4 0xa0 0 IRQ_TYPE_NONE>,
-				     <4 0xa1 0 IRQ_TYPE_NONE>,
-				     <4 0xa2 0 IRQ_TYPE_NONE>,
-				     <4 0xa3 0 IRQ_TYPE_NONE>;
+			gpio-ranges = <&pm8841_mpps 0 0 4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 
 		temp-alarm@2400 {
diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
index c1f2012d1c8b..da00b8f5eecd 100644
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
@@ -79,14 +79,9 @@
 			reg = <0xa000>;
 			gpio-controller;
 			#gpio-cells = <2>;
-			interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
-				     <0 0xa1 0 IRQ_TYPE_NONE>,
-				     <0 0xa2 0 IRQ_TYPE_NONE>,
-				     <0 0xa3 0 IRQ_TYPE_NONE>,
-				     <0 0xa4 0 IRQ_TYPE_NONE>,
-				     <0 0xa5 0 IRQ_TYPE_NONE>,
-				     <0 0xa6 0 IRQ_TYPE_NONE>,
-				     <0 0xa7 0 IRQ_TYPE_NONE>;
+			gpio-ranges = <&pm8941_mpps 0 0 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 
 		pm8941_temp: temp-alarm@2400 {
diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi
index e921c5e93a5d..7b8a8d9695da 100644
--- a/arch/arm/boot/dts/qcom-pma8084.dtsi
+++ b/arch/arm/boot/dts/qcom-pma8084.dtsi
@@ -42,14 +42,9 @@
 			reg = <0xa000>;
 			gpio-controller;
 			#gpio-cells = <2>;
-			interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
-				     <0 0xa1 0 IRQ_TYPE_NONE>,
-				     <0 0xa2 0 IRQ_TYPE_NONE>,
-				     <0 0xa3 0 IRQ_TYPE_NONE>,
-				     <0 0xa4 0 IRQ_TYPE_NONE>,
-				     <0 0xa5 0 IRQ_TYPE_NONE>,
-				     <0 0xa6 0 IRQ_TYPE_NONE>,
-				     <0 0xa7 0 IRQ_TYPE_NONE>;
+			gpio-ranges = <&pma8084_mpps 0 0 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 
 		pma8084_temp: temp-alarm@2400 {
diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
index 1e6ce035f76a..44526ad9d210 100644
--- a/arch/arm/boot/dts/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
@@ -228,7 +228,6 @@
 			compatible = "qcom,sdx55-qmp-usb3-uni-phy";
 			reg = <0x00ff6000 0x1c0>;
 			status = "disabled";
-			#clock-cells = <1>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;