Merge tag 'ti-k3-dt-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into arm/dt

Texas Instruments K3 SoC DT updates for v5.9

- Add platforms chipid nodes for am65x and j721e
- Update latest data sheet values for MMC on am65x
- Add serdes and usb3 support for j721e
- Add analog audio support for j721e
- Add SD card support for am65x
- Rename DT nodes for gic-its/smmu to their standard counterparts am65x/j721e
- HTTP links replaced with HTTPS ones

* tag 'ti-k3-dt-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux:
  arm64: dts: k3-j721e-proc-board: Add wait time for sampling Type-C DIR line
  arm64: dts: ti: k3-j721e: Enable Super-Speed support for USB0
  arm64: dts: ti: k3-j721e-main.dtsi: Add USB to SERDES MUX
  arm64: dts: ti: k3-j721e-main: Add system controller node and SERDES lane mux
  arm64: dts: ti: k3-j721e-main: Add WIZ and SERDES PHY nodes
  dt-bindings: mfd: ti,j721e-system-controller.yaml: Add J721e system controller
  arm64: dts: ti: k3-am65/j721e-main: rename gic-its node to msi-controller
  arm64: dts: ti: k3-j721e-main: rename smmu node to iommu
  arm64: dts: ti: k3-*: Replace HTTP links with HTTPS ones
  arm64: dts: ti: k3-am654-base-board: Add support for SD card
  arm64: dts: ti: k3-am65-main: Add support for sdhci1
  arm64: dts: ti: j721e-common-proc-board: Analog audio support
  arm64: dts: ti: k3-j721e-common-proc-board: Remove duplicated main_i2c1_exp4_pins_default
  arm64: dts: ti: k3-am654-main: Update otap-del-sel values
  arm64: dts: ti: k3-j721e-mcu-wakeup: add k3 platforms chipid module node
  arm64: dts: ti: k3-am65-wakeup: add k3 platforms chipid module node

Link: https://lore.kernel.org/r/3b3b9214-769d-ba1b-db5e-44414a8c5756@ti.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 165 insertions, 6 deletions

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 6df823aaa37c..8bc1e6ecc50e 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /dts-v1/;
@@ -34,6 +34,55 @@
 			gpios = <&wkup_gpio0 7 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	evm_12v0: fixedregulator-evm12v0 {
+		/* main supply */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_3v3: fixedregulator-vsys3v3 {
+		/* Output of LMS140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_5v0: fixedregulator-vsys5v0 {
+		/* Output of LM5140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	sound0: sound@0 {
+		compatible = "ti,j721e-cpb-audio";
+		model = "j721e-cpb";
+
+		ti,cpb-mcasp = <&mcasp10>;
+		ti,cpb-codec = <&pcm3168a_1>;
+
+		clocks = <&k3_clks 184 1>,
+			 <&k3_clks 184 2>, <&k3_clks 184 4>,
+			 <&k3_clks 157 371>,
+			 <&k3_clks 157 400>, <&k3_clks 157 401>;
+		clock-names = "cpb-mcasp-auxclk",
+			      "cpb-mcasp-auxclk-48000", "cpb-mcasp-auxclk-44100",
+			      "cpb-codec-scki",
+			      "cpb-codec-scki-48000", "cpb-codec-scki-44100";
+	};
 };
 
 &main_pmx0 {
@@ -60,6 +109,7 @@
 	main_usbss0_pins_default: main_usbss0_pins_default {
 		pinctrl-single,pins = <
 			J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */
+			J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 */
 		>;
 	};
 
@@ -103,10 +153,24 @@
 		>;
 	};
 
-	main_i2c1_exp4_pins_default: main-i2c1-exp4-pins-default {
+	mcasp10_pins_default: mcasp10_pins_default {
 		pinctrl-single,pins = <
-			J721E_IOPAD(0x230, PIN_INPUT, 7) /* (U2) ECAP0_IN_APWM_OUT.GPIO1_11 */
-		 >;
+			J721E_IOPAD(0x158, PIN_OUTPUT_PULLDOWN, 12) /* (U23) RGMII5_TX_CTL.MCASP10_ACLKX */
+			J721E_IOPAD(0x15c, PIN_OUTPUT_PULLDOWN, 12) /* (U26) RGMII5_RX_CTL.MCASP10_AFSX */
+			J721E_IOPAD(0x160, PIN_OUTPUT_PULLDOWN, 12) /* (V28) RGMII5_TD3.MCASP10_AXR0 */
+			J721E_IOPAD(0x164, PIN_OUTPUT_PULLDOWN, 12) /* (V29) RGMII5_TD2.MCASP10_AXR1 */
+			J721E_IOPAD(0x170, PIN_OUTPUT_PULLDOWN, 12) /* (U29) RGMII5_TXC.MCASP10_AXR2 */
+			J721E_IOPAD(0x174, PIN_OUTPUT_PULLDOWN, 12) /* (U25) RGMII5_RXC.MCASP10_AXR3 */
+			J721E_IOPAD(0x198, PIN_INPUT_PULLDOWN, 12) /* (V25) RGMII6_TD1.MCASP10_AXR4 */
+			J721E_IOPAD(0x19c, PIN_INPUT_PULLDOWN, 12) /* (W27) RGMII6_TD0.MCASP10_AXR5 */
+			J721E_IOPAD(0x1a0, PIN_INPUT_PULLDOWN, 12) /* (W29) RGMII6_TXC.MCASP10_AXR6 */
+		>;
+	};
+
+	audi_ext_refclk2_pins_default: audi_ext_refclk2_pins_default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1a4, PIN_OUTPUT, 3) /* (W26) RGMII6_RXC.AUDIO_EXT_REFCLK2 */
+		>;
 	};
 };
 
@@ -335,16 +399,44 @@
 	status = "disabled";
 };
 
+&usb_serdes_mux {
+	idle-states = <1>, <0>; /* USB0 to SERDES3, USB1 to SERDES1 */
+};
+
+&serdes_ln_ctrl {
+	idle-states = <SERDES0_LANE0_PCIE0_LANE0>, <SERDES0_LANE1_PCIE0_LANE1>,
+		      <SERDES1_LANE0_PCIE1_LANE0>, <SERDES1_LANE1_PCIE1_LANE1>,
+		      <SERDES2_LANE0_PCIE2_LANE0>, <SERDES2_LANE1_PCIE2_LANE1>,
+		      <SERDES3_LANE0_USB3_0_SWAP>, <SERDES3_LANE1_USB3_0>,
+		      <SERDES4_LANE0_EDP_LANE0>, <SERDES4_LANE1_EDP_LANE1>, <SERDES4_LANE2_EDP_LANE2>, <SERDES4_LANE3_EDP_LANE3>;
+};
+
+&serdes_wiz3 {
+	typec-dir-gpios = <&main_gpio1 3 GPIO_ACTIVE_HIGH>;
+	typec-dir-debounce-ms = <700>;	/* TUSB321, tCCB_DEFAULT 133 ms */
+};
+
+&serdes3 {
+	serdes3_usb_link: link@0 {
+		reg = <0>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_USB3>;
+		resets = <&serdes_wiz3 1>, <&serdes_wiz3 2>;
+	};
+};
+
 &usbss0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_usbss0_pins_default>;
-	ti,usb2-only;
 	ti,vbus-divider;
 };
 
 &usb0 {
 	dr_mode = "otg";
-	maximum-speed = "high-speed";
+	maximum-speed = "super-speed";
+	phys = <&serdes3_usb_link>;
+	phy-names = "cdns3,usb3-phy";
 };
 
 &usbss1 {
@@ -407,6 +499,22 @@
 		reg = <0x22>;
 		gpio-controller;
 		#gpio-cells = <2>;
+
+		p09 {
+			/* P11 - MCASP/TRACE_MUX_S0 */
+			gpio-hog;
+			gpios = <9 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "MCASP/TRACE_MUX_S0";
+		};
+
+		p10 {
+			/* P12 - MCASP/TRACE_MUX_S1 */
+			gpio-hog;
+			gpios = <10 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "MCASP/TRACE_MUX_S1";
+		};
 	};
 };
 
@@ -429,6 +537,12 @@
 	};
 };
 
+&k3_clks {
+	/* Confiure AUDIO_EXT_REFCLK2 pin as output */
+	pinctrl-names = "default";
+	pinctrl-0 = <&audi_ext_refclk2_pins_default>;
+};
+
 &main_i2c3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c3_pins_default>;
@@ -440,6 +554,31 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
+
+	pcm3168a_1: audio-codec@44 {
+		compatible = "ti,pcm3168a";
+		reg = <0x44>;
+
+		#sound-dai-cells = <1>;
+
+		reset-gpios = <&exp3 0 GPIO_ACTIVE_LOW>;
+
+		/* C_AUDIO_REFCLK2 -> RGMII6_RXC (W26) */
+		clocks = <&k3_clks 157 371>;
+		clock-names = "scki";
+
+		/* HSDIV3_16FFT_MAIN_4_HSDIVOUT2_CLK -> REFCLK2 */
+		assigned-clocks = <&k3_clks 157 371>;
+		assigned-clock-parents = <&k3_clks 157 400>;
+		assigned-clock-rates = <24576000>; /* for 48KHz */
+
+		VDD1-supply = <&vsys_3v3>;
+		VDD2-supply = <&vsys_3v3>;
+		VCCAD1-supply = <&vsys_5v0>;
+		VCCAD2-supply = <&vsys_5v0>;
+		VCCDA1-supply = <&vsys_5v0>;
+		VCCDA2-supply = <&vsys_5v0>;
+	};
 };
 
 &main_i2c6 {
@@ -492,3 +631,23 @@
 				 <&k3_clks 152 11>,	/* PLL18_HSDIV0 */
 				 <&k3_clks 152 18>;	/* PLL23_HSDIV0 */
 };
+
+&mcasp10 {
+	#sound-dai-cells = <0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcasp10_pins_default>;
+
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	auxclk-fs-ratio = <256>;
+
+	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
+		1 1 1 1
+		2 2 2 0
+	>;
+	tx-num-evt = <0>;
+	rx-num-evt = <0>;
+
+	status = "okay";
+};