Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree updates from Arnd Bergmann:
 "We get a moderate number of new machines this time, and only one new
  SoC variant (Actions S700):

  Actions:
   - S700 Soc and CubieBoard7 development board
   - Allo.com Sparky Single-board-computer

  Allwinner:
   - Orange Pi R1 development board
   - Libre Computer Board ALL-H3-CC H3 single-board computer

  ASpeed ast2x00:
   - Witherspoon: OpenPower Power9 server manufactured by IBM that uses the ASPEED ast2500
   - Zaius: OpenPower Power9 server manufactured by Invatech that uses the ASPEED ast2500
   - Q71L: Intel Xeon server manufactured by Qanta that uses the ASPEED ast2400

  AT91:
   - Axentia Nattis/Natte digital signage
   - sama5d2 PTC-ek Evaluation board

  Freescale/NXP i.MX:
   - SolidRun Humminboard2 development board
   - Variscite DART-MX6 SoM and Carrier-board
   - Technologic TS-4600 and TS-7970 development board
   - Toradex Colibri iMX7D SoM board
   - v1.5 variant of Solidrun Cubox-i and Hummingboard

  Freescale/NXP Layerscape:
   - Moxa UC-8410A Series industrial computer

  Gemini:
   - D-Link DNS-313 NAS enclosure

  OMAP:
   - LogicPD OMAP35xx SOM-LV devkit
   - LogicPD OMAP35xx Torpedo devkit

  Renesas:
   - r8a77970 (V3M) Starter Kit board
   - r8a7795 (M3-W) Salvator-XS board

  We finally managed to get the dtc warnings under control, with no more
  build-time warnings for bad device tree files. This includes fixes for
  the majority of platforms, including nomadik, samsung, lpc32xx, STi,
  spear, mediatek, freescale, qcom, realview, keystone, omap, kirkwood,
  renesas, hisilicon, and broadcom.

  Files get rearranged on a few platforms, in particular the Marvell
  Armada 7K/8K device tree files are changed in preparation for future
  SoC support, based on more than two of the same chips in one package,
  and some boards get renamed for oxnas for consistency.

  Finally, many existing SoCs gain descriptions for additional on-chip
  devices that we can now support with kernel drivers:

   - Allwinner A83t (drm, ethernet, i2c, ...), H3/H5 (USB-OTG)
   - Amlogic AXG family (clk, pinctrl, pwm, ...), and others (vpu, hdmi)
   - Aspeed clk controller support
   - Freescale LS1088A, LS1021A device support
   - Gemini Ethernet, PCI, TVE, panel
   - Keystone gpio, qspi, more uarts
   - Mediatek cpufreq, regulator, clock, reset
   - Marvell thermal, cpufreq, nand
   - Renesas SMP, thermal, timer, PWM, sound, phy, ipmmu
   - Rockchip Mipi, GPU, display
   - Samsung Exynos5433 PMU, power domain, nfc
   - Spreadtrum: sc9860 clocks
   - Tegra TX2 PSDI, HDMI, I2C,SMMU, display, fuse, ..."

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (690 commits)
  arm64: dts: stratix10: fix SPI settings
  ARM: dts: socfpga: add i2c reset signals
  arm64: dts: stratix10: add USB ECC reset bit
  arm64: dts: stratix10: enable USB on the devkit
  ARM: dts: socfpga: disable over-current for Arria10 USB devkit
  ARM: dts: Nokia N9: add support for up/down keys in the dts
  ARM: dts: nomadik: add interrupt-parent for clcd
  ARM: dts: Add ethernet to a bunch of platforms
  ARM: dts: Add ethernet to the Gemini SoC
  ARM: dts: rename oxnas dts files
  ARM: dts: s5pv210: add interrupt-parent for ohci
  ARM: lpc3250: fix uda1380 gpio numbers
  ARM: dts: STi: Add gpio polarity for "hdmi,hpd-gpio" property
  ARM: dts: dra7: Reduce shut down temperature of non-cpu thermal zones
  ARM: dts: n900: Add aliases for lcd and tvout displays
  ARM: dts: Update ti-sysc data for existing users
  ARM: dts: Fix smartreflex compatible for omap3 shared mpu-iva instance
  arm64: dts: marvell: armada-80x0: Fix pinctrl compatible string
  arm: spear13xx: Fix spics gpio controller's warning
  arm: spear13xx: Fix dmas cells
  ...

14 files changed, 723 insertions, 1012 deletions

diff --git a/arch/arm64/boot/dts/marvell/armada-372x.dtsi b/arch/arm64/boot/dts/marvell/armada-372x.dtsi
index 59d7557d3b1b..2554e0baea6b 100644
--- a/arch/arm64/boot/dts/marvell/armada-372x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-372x.dtsi
@@ -56,6 +56,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53","arm,armv8";
 			reg = <0x1>;
+			clocks = <&nb_periph_clk 16>;
 			enable-method = "psci";
 		};
 	};
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index 90c26d616a54..375026867342 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -65,6 +65,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0>;
+			clocks = <&nb_periph_clk 16>;
 			enable-method = "psci";
 		};
 	};
@@ -234,6 +235,12 @@
 				};
 			};
 
+			nb_pm: syscon@14000 {
+				compatible = "marvell,armada-3700-nb-pm",
+					     "syscon";
+				reg = <0x14000 0x60>;
+			};
+
 			pinctrl_sb: pinctrl@18800 {
 				compatible = "marvell,armada3710-sb-pinctrl",
 					     "syscon", "simple-mfd";
@@ -309,6 +316,20 @@
 				};
 			};
 
+			crypto: crypto@90000 {
+				compatible = "inside-secure,safexcel-eip97";
+				reg = <0x90000 0x20000>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "mem", "ring0", "ring1",
+						  "ring2", "ring3", "eip";
+				clocks = <&nb_periph_clk 15>;
+			};
+
 			sdhci1: sdhci@d0000 {
 				compatible = "marvell,armada-3700-sdhci",
 					     "marvell,sdhci-xenon";
diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
index 52b5341cb270..3ae05eee2c9a 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
@@ -61,7 +61,13 @@
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
 
-	cpm_reg_usb3_0_vbus: cpm-usb3-0-vbus {
+	aliases {
+		ethernet0 = &cp0_eth0;
+		ethernet1 = &cp0_eth1;
+		ethernet2 = &cp0_eth2;
+	};
+
+	cp0_reg_usb3_0_vbus: cp0-usb3-0-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb3h0-vbus";
 		regulator-min-microvolt = <5000000>;
@@ -70,7 +76,7 @@
 		gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
 	};
 
-	cpm_reg_usb3_1_vbus: cpm-usb3-1-vbus {
+	cp0_reg_usb3_1_vbus: cp0-usb3-1-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb3h1-vbus";
 		regulator-min-microvolt = <5000000>;
@@ -79,14 +85,14 @@
 		gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
 	};
 
-	cpm_usb3_0_phy: cpm-usb3-0-phy {
+	cp0_usb3_0_phy: cp0-usb3-0-phy {
 		compatible = "usb-nop-xceiv";
-		vcc-supply = <&cpm_reg_usb3_0_vbus>;
+		vcc-supply = <&cp0_reg_usb3_0_vbus>;
 	};
 
-	cpm_usb3_1_phy: cpm-usb3-1-phy {
+	cp0_usb3_1_phy: cp0-usb3-1-phy {
 		compatible = "usb-nop-xceiv";
-		vcc-supply = <&cpm_reg_usb3_1_vbus>;
+		vcc-supply = <&cp0_reg_usb3_1_vbus>;
 	};
 };
 
@@ -129,11 +135,11 @@
 };
 
 
-&cpm_pcie2 {
+&cp0_pcie2 {
 	status = "okay";
 };
 
-&cpm_i2c0 {
+&cp0_i2c0 {
 	status = "okay";
 	clock-frequency = <100000>;
 
@@ -156,7 +162,7 @@
 	};
 };
 
-&cpm_nand {
+&cp0_nand {
 	/*
 	 * SPI on CPM and NAND have common pins on this board. We can
 	 * use only one at a time. To enable the NAND (whihch will
@@ -186,7 +192,7 @@
 };
 
 
-&cpm_spi1 {
+&cp0_spi1 {
 	status = "okay";
 
 	spi-flash@0 {
@@ -214,17 +220,17 @@
 	};
 };
 
-&cpm_sata0 {
+&cp0_sata0 {
 	status = "okay";
 };
 
-&cpm_usb3_0 {
-	usb-phy = <&cpm_usb3_0_phy>;
+&cp0_usb3_0 {
+	usb-phy = <&cp0_usb3_0_phy>;
 	status = "okay";
 };
 
-&cpm_usb3_1 {
-	usb-phy = <&cpm_usb3_1_phy>;
+&cp0_usb3_1 {
+	usb-phy = <&cp0_usb3_1_phy>;
 	status = "okay";
 };
 
@@ -235,14 +241,14 @@
 	non-removable;
 };
 
-&cpm_sdhci0 {
+&cp0_sdhci0 {
 	status = "okay";
 	bus-width = <4>;
 	no-1-8-v;
 	cd-gpios = <&expander0 12 GPIO_ACTIVE_LOW>;
 };
 
-&cpm_mdio {
+&cp0_mdio {
 	status = "okay";
 
 	phy0: ethernet-phy@0 {
@@ -253,28 +259,28 @@
 	};
 };
 
-&cpm_ethernet {
+&cp0_ethernet {
 	status = "okay";
 };
 
-&cpm_eth0 {
+&cp0_eth0 {
 	status = "okay";
 	/* Network PHY */
 	phy-mode = "10gbase-kr";
 	/* Generic PHY, providing serdes lanes */
-	phys = <&cpm_comphy2 0>;
+	phys = <&cp0_comphy2 0>;
 };
 
-&cpm_eth1 {
+&cp0_eth1 {
 	status = "okay";
 	/* Network PHY */
 	phy = <&phy0>;
 	phy-mode = "sgmii";
 	/* Generic PHY, providing serdes lanes */
-	phys = <&cpm_comphy0 1>;
+	phys = <&cp0_comphy0 1>;
 };
 
-&cpm_eth2 {
+&cp0_eth2 {
 	status = "okay";
 	phy = <&phy1>;
 	phy-mode = "rgmii-id";
diff --git a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
index 0e1a1e5be399..f63b4fbd642b 100644
--- a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
@@ -44,25 +44,46 @@
  * Device Tree file for the Armada 70x0 SoC
  */
 
-#include "armada-cp110-master.dtsi"
-
 / {
 	aliases {
-		gpio1 = &cpm_gpio1;
-		gpio2 = &cpm_gpio2;
+		gpio1 = &cp0_gpio1;
+		gpio2 = &cp0_gpio2;
+		spi1 = &cp0_spi0;
+		spi2 = &cp0_spi1;
 	};
 };
 
-&cpm_gpio1 {
+/*
+ * Instantiate the CP110
+ */
+#define CP110_NAME		cp0
+#define CP110_BASE		f2000000
+#define CP110_PCIE_IO_BASE	0xf9000000
+#define CP110_PCIE_MEM_BASE	0xf6000000
+#define CP110_PCIE0_BASE	f2600000
+#define CP110_PCIE1_BASE	f2620000
+#define CP110_PCIE2_BASE	f2640000
+
+#include "armada-cp110.dtsi"
+
+#undef CP110_NAME
+#undef CP110_BASE
+#undef CP110_PCIE_IO_BASE
+#undef CP110_PCIE_MEM_BASE
+#undef CP110_PCIE0_BASE
+#undef CP110_PCIE1_BASE
+#undef CP110_PCIE2_BASE
+
+&cp0_gpio1 {
 	status = "okay";
 };
 
-&cpm_gpio2 {
+&cp0_gpio2 {
 	status = "okay";
 };
 
-&cpm_syscon0 {
-	cpm_pinctrl: pinctrl {
+&cp0_syscon0 {
+	cp0_pinctrl: pinctrl {
 		compatible = "marvell,armada-7k-pinctrl";
 
 		nand_pins: nand-pins {
diff --git a/arch/arm64/boot/dts/marvell/armada-8020.dtsi b/arch/arm64/boot/dts/marvell/armada-8020.dtsi
index 0ba0bc942598..3318d6b0214b 100644
--- a/arch/arm64/boot/dts/marvell/armada-8020.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8020.dtsi
@@ -60,6 +60,6 @@
  * oscillator so this one is let enabled.
  */
 
-&cpm_rtc {
+&cp0_rtc {
 	status = "disabled";
 };
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
index d97b72bed662..dba55baff20f 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
@@ -61,46 +61,53 @@
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
 
-	cpm_reg_usb3_0_vbus: cpm-usb3-0-vbus {
+	aliases {
+		ethernet0 = &cp0_eth0;
+		ethernet1 = &cp0_eth2;
+		ethernet2 = &cp1_eth0;
+		ethernet3 = &cp1_eth1;
+	};
+
+	cp0_reg_usb3_0_vbus: cp0-usb3-0-vbus {
 		compatible = "regulator-fixed";
-		regulator-name = "cpm-usb3h0-vbus";
+		regulator-name = "cp0-usb3h0-vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		enable-active-high;
 		gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
 	};
 
-	cpm_reg_usb3_1_vbus: cpm-usb3-1-vbus {
+	cp0_reg_usb3_1_vbus: cp0-usb3-1-vbus {
 		compatible = "regulator-fixed";
-		regulator-name = "cpm-usb3h1-vbus";
+		regulator-name = "cp0-usb3h1-vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		enable-active-high;
 		gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
 	};
 
-	cpm_usb3_0_phy: cpm-usb3-0-phy {
+	cp0_usb3_0_phy: cp0-usb3-0-phy {
 		compatible = "usb-nop-xceiv";
-		vcc-supply = <&cpm_reg_usb3_0_vbus>;
+		vcc-supply = <&cp0_reg_usb3_0_vbus>;
 	};
 
-	cpm_usb3_1_phy: cpm-usb3-1-phy {
+	cp0_usb3_1_phy: cp0-usb3-1-phy {
 		compatible = "usb-nop-xceiv";
-		vcc-supply = <&cpm_reg_usb3_1_vbus>;
+		vcc-supply = <&cp0_reg_usb3_1_vbus>;
 	};
 
-	cps_reg_usb3_0_vbus: cps-usb3-0-vbus {
+	cp1_reg_usb3_0_vbus: cp1-usb3-0-vbus {
 		compatible = "regulator-fixed";
-		regulator-name = "cps-usb3h0-vbus";
+		regulator-name = "cp1-usb3h0-vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		enable-active-high;
 		gpio = <&expander1 0 GPIO_ACTIVE_HIGH>;
 	};
 
-	cps_usb3_0_phy: cps-usb3-0-phy {
+	cp1_usb3_0_phy: cp1-usb3-0-phy {
 		compatible = "usb-nop-xceiv";
-		vcc-supply = <&cps_reg_usb3_0_vbus>;
+		vcc-supply = <&cp1_reg_usb3_0_vbus>;
 	};
 };
 
@@ -144,16 +151,16 @@
 };
 
 /* CON6 on CP0 expansion */
-&cpm_pcie0 {
+&cp0_pcie0 {
 	status = "okay";
 };
 
 /* CON5 on CP0 expansion */
-&cpm_pcie2 {
+&cp0_pcie2 {
 	status = "okay";
 };
 
-&cpm_i2c0 {
+&cp0_i2c0 {
 	status = "okay";
 	clock-frequency = <100000>;
 
@@ -178,23 +185,23 @@
 };
 
 /* CON4 on CP0 expansion */
-&cpm_sata0 {
+&cp0_sata0 {
 	status = "okay";
 };
 
 /* CON9 on CP0 expansion */
-&cpm_usb3_0 {
-	usb-phy = <&cpm_usb3_0_phy>;
+&cp0_usb3_0 {
+	usb-phy = <&cp0_usb3_0_phy>;
 	status = "okay";
 };
 
 /* CON10 on CP0 expansion */
-&cpm_usb3_1 {
-	usb-phy = <&cpm_usb3_1_phy>;
+&cp0_usb3_1 {
+	usb-phy = <&cp0_usb3_1_phy>;
 	status = "okay";
 };
 
-&cpm_mdio {
+&cp0_mdio {
 	status = "okay";
 
 	phy1: ethernet-phy@1 {
@@ -202,42 +209,42 @@
 	};
 };
 
-&cpm_ethernet {
+&cp0_ethernet {
 	status = "okay";
 };
 
-&cpm_eth0 {
+&cp0_eth0 {
 	status = "okay";
 	phy-mode = "10gbase-kr";
 };
 
-&cpm_eth2 {
+&cp0_eth2 {
 	status = "okay";
 	phy = <&phy1>;
 	phy-mode = "rgmii-id";
 };
 
 /* CON6 on CP1 expansion */
-&cps_pcie0 {
+&cp1_pcie0 {
 	status = "okay";
 };
 
 /* CON7 on CP1 expansion */
-&cps_pcie1 {
+&cp1_pcie1 {
 	status = "okay";
 };
 
 /* CON5 on CP1 expansion */
-&cps_pcie2 {
+&cp1_pcie2 {
 	status = "okay";
 };
 
-&cps_i2c0 {
+&cp1_i2c0 {
 	status = "okay";
 	clock-frequency = <100000>;
 };
 
-&cps_spi1 {
+&cp1_spi1 {
 	status = "okay";
 
 	spi-flash@0 {
@@ -268,23 +275,51 @@
 	};
 };
 
+/*
+ * Proper NAND usage will require DPR-76 to be in position 1-2, which disables
+ * MDIO signal of CP1.
+ */
+&cp1_nand {
+	num-cs = <1>;
+	pinctrl-0 = <&nand_pins>, <&nand_rb>;
+	pinctrl-names = "default";
+	nand-ecc-strength = <4>;
+	nand-ecc-step-size = <512>;
+	marvell,nand-enable-arbiter;
+	marvell,system-controller = <&cp1_syscon0>;
+	nand-on-flash-bbt;
+
+	partition@0 {
+		label = "U-Boot";
+		reg = <0 0x200000>;
+	};
+	partition@200000 {
+		label = "Linux";
+		reg = <0x200000 0xe00000>;
+	};
+	partition@1000000 {
+		label = "Filesystem";
+		reg = <0x1000000 0x3f000000>;
+	};
+};
+
 /* CON4 on CP1 expansion */
-&cps_sata0 {
+&cp1_sata0 {
 	status = "okay";
 };
 
 /* CON9 on CP1 expansion */
-&cps_usb3_0 {
-	usb-phy = <&cps_usb3_0_phy>;
+&cp1_usb3_0 {
+	usb-phy = <&cp1_usb3_0_phy>;
 	status = "okay";
 };
 
 /* CON10 on CP1 expansion */
-&cps_usb3_1 {
+&cp1_usb3_1 {
 	status = "okay";
 };
 
-&cps_mdio {
+&cp1_mdio {
 	status = "okay";
 
 	phy0: ethernet-phy@0 {
@@ -292,16 +327,16 @@
 	};
 };
 
-&cps_ethernet {
+&cp1_ethernet {
 	status = "okay";
 };
 
-&cps_eth0 {
+&cp1_eth0 {
 	status = "okay";
 	phy-mode = "10gbase-kr";
 };
 
-&cps_eth1 {
+&cp1_eth1 {
 	status = "okay";
 	phy = <&phy0>;
 	phy-mode = "rgmii-id";
@@ -313,7 +348,7 @@
 	non-removable;
 };
 
-&cpm_sdhci0 {
+&cp0_sdhci0 {
 	status = "okay";
 	bus-width = <8>;
 	non-removable;
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
index b3350827ee55..626e9d0462c3 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
@@ -62,6 +62,12 @@
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
 
+	aliases {
+		ethernet0 = &cp0_eth0;
+		ethernet1 = &cp1_eth0;
+		ethernet2 = &cp1_eth1;
+	};
+
 	/* Regulator labels correspond with schematics */
 	v_3_3: regulator-3-3v {
 		compatible = "regulator-fixed";
@@ -84,9 +90,9 @@
 	v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 {
 		compatible = "regulator-fixed";
 		enable-active-high;
-		gpio = <&cpm_gpio2 15 GPIO_ACTIVE_HIGH>;
+		gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&cpm_xhci_vbus_pins>;
+		pinctrl-0 = <&cp0_xhci_vbus_pins>;
 		regulator-name = "v_5v0_usb3_hst_vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
@@ -120,17 +126,17 @@
 	vqmmc-supply = <&v_vddo_h>;
 };
 
-&cpm_i2c0 {
+&cp0_i2c0 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&cpm_i2c0_pins>;
+	pinctrl-0 = <&cp0_i2c0_pins>;
 	status = "okay";
 };
 
-&cpm_i2c1 {
+&cp0_i2c1 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&cpm_i2c1_pins>;
+	pinctrl-0 = <&cp0_i2c1_pins>;
 	status = "okay";
 
 	i2c-switch@70 {
@@ -157,9 +163,9 @@
 	};
 };
 
-&cpm_mdio {
+&cp0_mdio {
 	pinctrl-names = "default";
-	pinctrl-0 = <&cpm_ge_mdio_pins>;
+	pinctrl-0 = <&cp0_ge_mdio_pins>;
 	status = "okay";
 
 	ge_phy: ethernet-phy@0 {
@@ -167,44 +173,44 @@
 	};
 };
 
-&cpm_pcie0 {
+&cp0_pcie0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&cpm_pcie_pins>;
+	pinctrl-0 = <&cp0_pcie_pins>;
 	num-lanes = <4>;
 	num-viewport = <8>;
-	reset-gpio = <&cpm_gpio1 20 GPIO_ACTIVE_LOW>;
+	reset-gpio = <&cp0_gpio1 20 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
-&cpm_pinctrl {
-	cpm_ge_mdio_pins: ge-mdio-pins {
+&cp0_pinctrl {
+	cp0_ge_mdio_pins: ge-mdio-pins {
 		marvell,pins = "mpp32", "mpp34";
 		marvell,function = "ge";
 	};
-	cpm_i2c1_pins: i2c1-pins {
+	cp0_i2c1_pins: i2c1-pins {
 		marvell,pins = "mpp35", "mpp36";
 		marvell,function = "i2c1";
 	};
-	cpm_i2c0_pins: i2c0-pins {
+	cp0_i2c0_pins: i2c0-pins {
 		marvell,pins = "mpp37", "mpp38";
 		marvell,function = "i2c0";
 	};
-	cpm_xhci_vbus_pins: xhci0-vbus-pins {
+	cp0_xhci_vbus_pins: xhci0-vbus-pins {
 		marvell,pins = "mpp47";
 		marvell,function = "gpio";
 	};
-	cpm_pcie_pins: pcie-pins {
+	cp0_pcie_pins: pcie-pins {
 		marvell,pins = "mpp52";
 		marvell,function = "gpio";
 	};
-	cpm_sdhci_pins: sdhci-pins {
+	cp0_sdhci_pins: sdhci-pins {
 		marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
 			       "mpp60", "mpp61";
 		marvell,function = "sdio";
 	};
 };
 
-&cpm_xmdio {
+&cp0_xmdio {
 	status = "okay";
 
 	phy0: ethernet-phy@0 {
@@ -218,83 +224,83 @@
 	};
 };
 
-&cpm_ethernet {
+&cp0_ethernet {
 	status = "okay";
 };
 
-&cpm_eth0 {
+&cp0_eth0 {
 	status = "okay";
 	/* Network PHY */
 	phy = <&phy0>;
 	phy-mode = "10gbase-kr";
 	/* Generic PHY, providing serdes lanes */
-	phys = <&cpm_comphy4 0>;
+	phys = <&cp0_comphy4 0>;
 };
 
-&cpm_sata0 {
+&cp0_sata0 {
 	/* CPM Lane 0 - U29 */
 	status = "okay";
 };
 
-&cpm_sdhci0 {
+&cp0_sdhci0 {
 	/* U6 */
 	broken-cd;
 	bus-width = <4>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&cpm_sdhci_pins>;
+	pinctrl-0 = <&cp0_sdhci_pins>;
 	status = "okay";
 	vqmmc-supply = <&v_3_3>;
 };
 
-&cpm_usb3_0 {
+&cp0_usb3_0 {
 	/* J38? - USB2.0 only */
 	status = "okay";
 };
 
-&cpm_usb3_1 {
+&cp0_usb3_1 {
 	/* J38? - USB2.0 only */
 	status = "okay";
 };
 
-&cps_ethernet {
+&cp1_ethernet {
 	status = "okay";
 };
 
-&cps_eth0 {
+&cp1_eth0 {
 	status = "okay";
 	/* Network PHY */
 	phy = <&phy8>;
 	phy-mode = "10gbase-kr";
 	/* Generic PHY, providing serdes lanes */
-	phys = <&cps_comphy4 0>;
+	phys = <&cp1_comphy4 0>;
 };
 
-&cps_eth1 {
+&cp1_eth1 {
 	/* CPS Lane 0 - J5 (Gigabit RJ45) */
 	status = "okay";
 	/* Network PHY */
 	phy = <&ge_phy>;
 	phy-mode = "sgmii";
 	/* Generic PHY, providing serdes lanes */
-	phys = <&cps_comphy0 1>;
+	phys = <&cp1_comphy0 1>;
 };
 
-&cps_pinctrl {
-	cps_spi1_pins: spi1-pins {
+&cp1_pinctrl {
+	cp1_spi1_pins: spi1-pins {
 		marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16";
 		marvell,function = "spi1";
 	};
 };
 
-&cps_sata0 {
+&cp1_sata0 {
 	/* CPS Lane 1 - U32 */
 	/* CPS Lane 3 - U31 */
 	status = "okay";
 };
 
-&cps_spi1 {
+&cp1_spi1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&cps_spi1_pins>;
+	pinctrl-0 = <&cp1_spi1_pins>;
 	status = "okay";
 
 	spi-flash@0 {
@@ -304,7 +310,7 @@
 	};
 };
 
-&cps_usb3_0 {
+&cp1_usb3_0 {
 	/* CPS Lane 2 - CON7 */
 	usb-phy = <&usb3h0_phy>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/marvell/armada-8040.dtsi b/arch/arm64/boot/dts/marvell/armada-8040.dtsi
index 60fe84f5cbcc..83d2b40e5981 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040.dtsi
@@ -59,6 +59,6 @@
  * disable it. However, the RTC clock in CP slave is connected to the
  * oscillator so this one is let enabled.
  */
-&cpm_rtc {
+&cp0_rtc {
 	status = "disabled";
 };
diff --git a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
index 666ebe96ba0d..e9c84a1d3c4d 100644
--- a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
@@ -44,33 +44,104 @@
  * Device Tree file for the Armada 80x0 SoC family
  */
 
-#include "armada-cp110-master.dtsi"
-#include "armada-cp110-slave.dtsi"
-
 / {
 	aliases {
-		gpio1 = &cps_gpio1;
-		gpio2 = &cpm_gpio2;
+		gpio1 = &cp1_gpio1;
+		gpio2 = &cp0_gpio2;
+		spi1 = &cp0_spi0;
+		spi2 = &cp0_spi1;
+		spi3 = &cp1_spi0;
+		spi4 = &cp1_spi1;
 	};
 };
 
+/*
+ * Instantiate the master CP110
+ */
+#define CP110_NAME		cp0
+#define CP110_BASE		f2000000
+#define CP110_PCIE_IO_BASE	0xf9000000
+#define CP110_PCIE_MEM_BASE	0xf6000000
+#define CP110_PCIE0_BASE	f2600000
+#define CP110_PCIE1_BASE	f2620000
+#define CP110_PCIE2_BASE	f2640000
+
+#include "armada-cp110.dtsi"
+
+#undef CP110_NAME
+#undef CP110_BASE
+#undef CP110_PCIE_IO_BASE
+#undef CP110_PCIE_MEM_BASE
+#undef CP110_PCIE0_BASE
+#undef CP110_PCIE1_BASE
+#undef CP110_PCIE2_BASE
+
+/*
+ * Instantiate the slave CP110
+ */
+#define CP110_NAME		cp1
+#define CP110_BASE		f4000000
+#define CP110_PCIE_IO_BASE	0xfd000000
+#define CP110_PCIE_MEM_BASE	0xfa000000
+#define CP110_PCIE0_BASE	f4600000
+#define CP110_PCIE1_BASE	f4620000
+#define CP110_PCIE2_BASE	f4640000
+
+#include "armada-cp110.dtsi"
+
+#undef CP110_NAME
+#undef CP110_BASE
+#undef CP110_PCIE_IO_BASE
+#undef CP110_PCIE_MEM_BASE
+#undef CP110_PCIE0_BASE
+#undef CP110_PCIE1_BASE
+#undef CP110_PCIE2_BASE
+
 /* The 80x0 has two CP blocks, but uses only one block from each. */
-&cps_gpio1 {
+&cp1_gpio1 {
 	status = "okay";
 };
 
-&cpm_gpio2 {
+&cp0_gpio2 {
 	status = "okay";
 };
 
-&cpm_syscon0 {
-	cpm_pinctrl: pinctrl {
+&cp0_syscon0 {
+	cp0_pinctrl: pinctrl {
 		compatible = "marvell,armada-8k-cpm-pinctrl";
 	};
 };
 
-&cps_syscon0 {
-	cps_pinctrl: pinctrl {
+&cp1_syscon0 {
+	cp1_pinctrl: pinctrl {
 		compatible = "marvell,armada-8k-cps-pinctrl";
+
+		nand_pins: nand-pins {
+			marvell,pins =
+			"mpp0", "mpp1", "mpp2", "mpp3",
+			"mpp4", "mpp5", "mpp6", "mpp7",
+			"mpp8", "mpp9", "mpp10", "mpp11",
+			"mpp15", "mpp16", "mpp17", "mpp18",
+			"mpp19", "mpp20", "mpp21", "mpp22",
+			"mpp23", "mpp24", "mpp25", "mpp26",
+			"mpp27";
+			marvell,function = "dev";
+		};
+
+		nand_rb: nand-rb {
+			marvell,pins = "mpp13", "mpp12";
+			marvell,function = "nf";
+		};
 	};
 };
+
+&cp1_crypto {
+	/*
+	 * The cryptographic engine found on the cp110
+	 * master is enabled by default at the SoC
+	 * level. Because it is not possible as of now
+	 * to enable two cryptographic engines in
+	 * parallel, disable this one by default.
+	 */
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
index 1c4dd8ab9ad5..f9b66b81f9fc 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
@@ -58,6 +58,7 @@
 		serial0 = &uart0;
 		serial1 = &uart1;
 		gpio0 = &ap_gpio;
+		spi0 = &spi0;
 	};
 
 	psci {
@@ -203,7 +204,6 @@
 				reg = <0x510600 0x50>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				cell-index = <0>;
 				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&ap_clk 3>;
 				status = "disabled";
@@ -241,7 +241,7 @@
 
 			};
 
-			watchdog: watchdog@600000 {
+			watchdog: watchdog@610000 {
 				compatible = "arm,sbsa-gwdt";
 				reg = <0x610000 0x1000>, <0x600000 0x1000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
@@ -285,6 +285,12 @@
 					gpio-ranges = <&ap_pinctrl 0 0 20>;
 				};
 			};
+
+			ap_thermal: thermal@6f808c {
+				compatible = "marvell,armada-ap806-thermal";
+				reg = <0x6f808c 0x4>,
+				      <0x6f8084 0x8>;
+			};
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/marvell/armada-common.dtsi b/arch/arm64/boot/dts/marvell/armada-common.dtsi
new file mode 100644
index 000000000000..c6dd1d81c68d
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-common.dtsi
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ */
+
+/* Common definitions used by Armada 7K/8K DTs */
+#define PASTER(x, y) x ## y
+#define EVALUATOR(x, y) PASTER(x, y)
+#define CP110_LABEL(name) EVALUATOR(CP110_NAME, EVALUATOR(_, name))
+#define ADDRESSIFY(addr) EVALUATOR(0x, addr)
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
deleted file mode 100644
index 9c7724e82aff..000000000000
--- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
+++ /dev/null
@@ -1,446 +0,0 @@
-/*
- * Copyright (C) 2016 Marvell Technology Group Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/*
- * Device Tree file for Marvell Armada CP110 Master.
- */
-
-#define ICU_GRP_NSR 0x0
-
-/ {
-	cp110-master {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		compatible = "simple-bus";
-		interrupt-parent = <&cpm_icu>;
-		ranges;
-
-		config-space@f2000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0x0 0x0 0xf2000000 0x2000000>;
-
-			cpm_ethernet: ethernet@0 {
-				compatible = "marvell,armada-7k-pp22";
-				reg = <0x0 0x100000>, <0x129000 0xb000>;
-				clocks = <&cpm_clk 1 3>, <&cpm_clk 1 9>,
-					 <&cpm_clk 1 5>, <&cpm_clk 1 18>;
-				clock-names = "pp_clk", "gop_clk",
-					      "mg_clk","axi_clk";
-				marvell,system-controller = <&cpm_syscon0>;
-				status = "disabled";
-				dma-coherent;
-
-				cpm_eth0: eth0 {
-					interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>;
-					interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
-							  "tx-cpu3", "rx-shared", "link";
-					port-id = <0>;
-					gop-port-id = <0>;
-					status = "disabled";
-				};
-
-				cpm_eth1: eth1 {
-					interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>;
-					interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
-							  "tx-cpu3", "rx-shared", "link";
-					port-id = <1>;
-					gop-port-id = <2>;
-					status = "disabled";
-				};
-
-				cpm_eth2: eth2 {
-					interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>;
-					interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
-							  "tx-cpu3", "rx-shared", "link";
-					port-id = <2>;
-					gop-port-id = <3>;
-					status = "disabled";
-				};
-			};
-
-			cpm_comphy: phy@120000 {
-				compatible = "marvell,comphy-cp110";
-				reg = <0x120000 0x6000>;
-				marvell,system-controller = <&cpm_syscon0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				cpm_comphy0: phy@0 {
-					reg = <0>;
-					#phy-cells = <1>;
-				};
-
-				cpm_comphy1: phy@1 {
-					reg = <1>;
-					#phy-cells = <1>;
-				};
-
-				cpm_comphy2: phy@2 {
-					reg = <2>;
-					#phy-cells = <1>;
-				};
-
-				cpm_comphy3: phy@3 {
-					reg = <3>;
-					#phy-cells = <1>;
-				};
-
-				cpm_comphy4: phy@4 {
-					reg = <4>;
-					#phy-cells = <1>;
-				};
-
-				cpm_comphy5: phy@5 {
-					reg = <5>;
-					#phy-cells = <1>;
-				};
-			};
-
-			cpm_mdio: mdio@12a200 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "marvell,orion-mdio";
-				reg = <0x12a200 0x10>;
-				clocks = <&cpm_clk 1 9>, <&cpm_clk 1 5>,
-					 <&cpm_clk 1 6>, <&cpm_clk 1 18>;
-				status = "disabled";
-			};
-
-			cpm_xmdio: mdio@12a600 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "marvell,xmdio";
-				reg = <0x12a600 0x10>;
-				status = "disabled";
-			};
-
-			cpm_icu: interrupt-controller@1e0000 {
-				compatible = "marvell,cp110-icu";
-				reg = <0x1e0000 0x10>;
-				#interrupt-cells = <3>;
-				interrupt-controller;
-				msi-parent = <&gicp>;
-			};
-
-			cpm_rtc: rtc@284000 {
-				compatible = "marvell,armada-8k-rtc";
-				reg = <0x284000 0x20>, <0x284080 0x24>;
-				reg-names = "rtc", "rtc-soc";
-				interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			cpm_syscon0: system-controller@440000 {
-				compatible = "syscon", "simple-mfd";
-				reg = <0x440000 0x2000>;
-
-				cpm_clk: clock {
-					compatible = "marvell,cp110-clock";
-					#clock-cells = <2>;
-				};
-
-				cpm_gpio1: gpio@100 {
-					compatible = "marvell,armada-8k-gpio";
-					offset = <0x100>;
-					ngpios = <32>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-ranges = <&cpm_pinctrl 0 0 32>;
-					interrupt-controller;
-					interrupts = <ICU_GRP_NSR 86 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 85 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 84 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 83 IRQ_TYPE_LEVEL_HIGH>;
-					status = "disabled";
-				};
-
-				cpm_gpio2: gpio@140 {
-					compatible = "marvell,armada-8k-gpio";
-					offset = <0x140>;
-					ngpios = <31>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-ranges = <&cpm_pinctrl 0 32 31>;
-					interrupt-controller;
-					interrupts = <ICU_GRP_NSR 82 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 81 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 80 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 79 IRQ_TYPE_LEVEL_HIGH>;
-					status = "disabled";
-				};
-			};
-
-			cpm_usb3_0: usb3@500000 {
-				compatible = "marvell,armada-8k-xhci",
-					     "generic-xhci";
-				reg = <0x500000 0x4000>;
-				dma-coherent;
-				interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&cpm_clk 1 22>;
-				status = "disabled";
-			};
-
-			cpm_usb3_1: usb3@510000 {
-				compatible = "marvell,armada-8k-xhci",
-					     "generic-xhci";
-				reg = <0x510000 0x4000>;
-				dma-coherent;
-				interrupts = <ICU_GRP_NSR 105 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&cpm_clk 1 23>;
-				status = "disabled";
-			};
-
-			cpm_sata0: sata@540000 {
-				compatible = "marvell,armada-8k-ahci",
-					     "generic-ahci";
-				reg = <0x540000 0x30000>;
-				interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&cpm_clk 1 15>;
-				status = "disabled";
-			};
-
-			cpm_xor0: xor@6a0000 {
-				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
-				reg = <0x6a0000 0x1000>,
-				      <0x6b0000 0x1000>;
-				dma-coherent;
-				msi-parent = <&gic_v2m0>;
-				clocks = <&cpm_clk 1 8>;
-			};
-
-			cpm_xor1: xor@6c0000 {
-				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
-				reg = <0x6c0000 0x1000>,
-				      <0x6d0000 0x1000>;
-				dma-coherent;
-				msi-parent = <&gic_v2m0>;
-				clocks = <&cpm_clk 1 7>;
-			};
-
-			cpm_spi0: spi@700600 {
-				compatible = "marvell,armada-380-spi";
-				reg = <0x700600 0x50>;
-				#address-cells = <0x1>;
-				#size-cells = <0x0>;
-				cell-index = <1>;
-				clocks = <&cpm_clk 1 21>;
-				status = "disabled";
-			};
-
-			cpm_spi1: spi@700680 {
-				compatible = "marvell,armada-380-spi";
-				reg = <0x700680 0x50>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <2>;
-				clocks = <&cpm_clk 1 21>;
-				status = "disabled";
-			};
-
-			cpm_i2c0: i2c@701000 {
-				compatible = "marvell,mv78230-i2c";
-				reg = <0x701000 0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <ICU_GRP_NSR 120 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&cpm_clk 1 21>;
-				status = "disabled";
-			};
-
-			cpm_i2c1: i2c@701100 {
-				compatible = "marvell,mv78230-i2c";
-				reg = <0x701100 0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <ICU_GRP_NSR 121 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&cpm_clk 1 21>;
-				status = "disabled";
-			};
-
-			cpm_nand: nand@720000 {
-				/*
-				 * Due to the limiation of the pin available
-				 * this controller is only usable on the CPM
-				 * for A7K and on the CPS for A8K.
-				 */
-				compatible = "marvell,armada-8k-nand",
-					     "marvell,armada370-nand";
-				reg = <0x720000 0x54>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				interrupts = <ICU_GRP_NSR 115 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&cpm_clk 1 2>;
-				marvell,system-controller = <&cpm_syscon0>;
-				status = "disabled";
-			};
-
-			cpm_trng: trng@760000 {
-				compatible = "marvell,armada-8k-rng", "inside-secure,safexcel-eip76";
-				reg = <0x760000 0x7d>;
-				interrupts = <ICU_GRP_NSR 95 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&cpm_clk 1 25>;
-				status = "okay";
-			};
-
-			cpm_sdhci0: sdhci@780000 {
-				compatible = "marvell,armada-cp110-sdhci";
-				reg = <0x780000 0x300>;
-				interrupts = <ICU_GRP_NSR 27 IRQ_TYPE_LEVEL_HIGH>;
-				clock-names = "core","axi";
-				clocks = <&cpm_clk 1 4>, <&cpm_clk 1 18>;
-				dma-coherent;
-				status = "disabled";
-			};
-
-			cpm_crypto: crypto@800000 {
-				compatible = "inside-secure,safexcel-eip197";
-				reg = <0x800000 0x200000>;
-				interrupts = <ICU_GRP_NSR 87 IRQ_TYPE_LEVEL_HIGH>,
-					     <ICU_GRP_NSR 88 IRQ_TYPE_LEVEL_HIGH>,
-					     <ICU_GRP_NSR 89 IRQ_TYPE_LEVEL_HIGH>,
-					     <ICU_GRP_NSR 90 IRQ_TYPE_LEVEL_HIGH>,
-					     <ICU_GRP_NSR 91 IRQ_TYPE_LEVEL_HIGH>,
-					     <ICU_GRP_NSR 92 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "mem", "ring0", "ring1",
-				"ring2", "ring3", "eip";
-				clocks = <&cpm_clk 1 26>;
-				dma-coherent;
-			};
-		};
-
-		cpm_pcie0: pcie@f2600000 {
-			compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
-			reg = <0 0xf2600000 0 0x10000>,
-			      <0 0xf6f00000 0 0x80000>;
-			reg-names = "ctrl", "config";
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			device_type = "pci";
-			dma-coherent;
-			msi-parent = <&gic_v2m0>;
-
-			bus-range = <0 0xff>;
-			ranges =
-				/* downstream I/O */
-				<0x81000000 0 0xf9000000 0  0xf9000000 0 0x10000
-				/* non-prefetchable memory */
-				0x82000000 0 0xf6000000 0  0xf6000000 0 0xf00000>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &cpm_icu ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
-			interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
-			num-lanes = <1>;
-			clocks = <&cpm_clk 1 13>;
-			status = "disabled";
-		};
-
-		cpm_pcie1: pcie@f2620000 {
-			compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
-			reg = <0 0xf2620000 0 0x10000>,
-			      <0 0xf7f00000 0 0x80000>;
-			reg-names = "ctrl", "config";
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			device_type = "pci";
-			dma-coherent;
-			msi-parent = <&gic_v2m0>;
-
-			bus-range = <0 0xff>;
-			ranges =
-				/* downstream I/O */
-				<0x81000000 0 0xf9010000 0  0xf9010000 0 0x10000
-				/* non-prefetchable memory */
-				0x82000000 0 0xf7000000 0  0xf7000000 0 0xf00000>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &cpm_icu ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
-			interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
-
-			num-lanes = <1>;
-			clocks = <&cpm_clk 1 11>;
-			status = "disabled";
-		};
-
-		cpm_pcie2: pcie@f2640000 {
-			compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
-			reg = <0 0xf2640000 0 0x10000>,
-			      <0 0xf8f00000 0 0x80000>;
-			reg-names = "ctrl", "config";
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			device_type = "pci";
-			dma-coherent;
-			msi-parent = <&gic_v2m0>;
-
-			bus-range = <0 0xff>;
-			ranges =
-				/* downstream I/O */
-				<0x81000000 0 0xf9020000 0  0xf9020000 0 0x10000
-				/* non-prefetchable memory */
-				0x82000000 0 0xf8000000 0  0xf8000000 0 0xf00000>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &cpm_icu ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
-			interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
-
-			num-lanes = <1>;
-			clocks = <&cpm_clk 1 12>;
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
deleted file mode 100644
index 87ac68b2cf37..000000000000
--- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
+++ /dev/null
@@ -1,444 +0,0 @@
-/*
- * Copyright (C) 2016 Marvell Technology Group Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/*
- * Device Tree file for Marvell Armada CP110 Slave.
- */
-
-#define ICU_GRP_NSR 0x0
-
-/ {
-	cp110-slave {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		compatible = "simple-bus";
-		interrupt-parent = <&cps_icu>;
-		ranges;
-
-		config-space@f4000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0x0 0x0 0xf4000000 0x2000000>;
-
-			cps_ethernet: ethernet@0 {
-				compatible = "marvell,armada-7k-pp22";
-				reg = <0x0 0x100000>, <0x129000 0xb000>;
-				clocks = <&cps_clk 1 3>, <&cps_clk 1 9>,
-					 <&cps_clk 1 5>, <&cps_clk 1 18>;
-				clock-names = "pp_clk", "gop_clk",
-					      "mg_clk", "axi_clk";
-				marvell,system-controller = <&cps_syscon0>;
-				status = "disabled";
-				dma-coherent;
-
-				cps_eth0: eth0 {
-					interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>;
-					interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
-							  "tx-cpu3", "rx-shared", "link";
-					port-id = <0>;
-					gop-port-id = <0>;
-					status = "disabled";
-				};
-
-				cps_eth1: eth1 {
-					interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>;
-					interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
-							  "tx-cpu3", "rx-shared", "link";
-					port-id = <1>;
-					gop-port-id = <2>;
-					status = "disabled";
-				};
-
-				cps_eth2: eth2 {
-					interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>;
-					interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
-							  "tx-cpu3", "rx-shared", "link";
-					port-id = <2>;
-					gop-port-id = <3>;
-					status = "disabled";
-				};
-			};
-
-			cps_comphy: phy@120000 {
-				compatible = "marvell,comphy-cp110";
-				reg = <0x120000 0x6000>;
-				marvell,system-controller = <&cps_syscon0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				cps_comphy0: phy@0 {
-					reg = <0>;
-					#phy-cells = <1>;
-				};
-
-				cps_comphy1: phy@1 {
-					reg = <1>;
-					#phy-cells = <1>;
-				};
-
-				cps_comphy2: phy@2 {
-					reg = <2>;
-					#phy-cells = <1>;
-				};
-
-				cps_comphy3: phy@3 {
-					reg = <3>;
-					#phy-cells = <1>;
-				};
-
-				cps_comphy4: phy@4 {
-					reg = <4>;
-					#phy-cells = <1>;
-				};
-
-				cps_comphy5: phy@5 {
-					reg = <5>;
-					#phy-cells = <1>;
-				};
-			};
-
-			cps_mdio: mdio@12a200 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "marvell,orion-mdio";
-				reg = <0x12a200 0x10>;
-				clocks = <&cps_clk 1 9>, <&cps_clk 1 5>,
-					 <&cps_clk 1 6>, <&cps_clk 1 18>;
-				status = "disabled";
-			};
-
-			cps_xmdio: mdio@12a600 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "marvell,xmdio";
-				reg = <0x12a600 0x10>;
-				status = "disabled";
-			};
-
-			cps_icu: interrupt-controller@1e0000 {
-				compatible = "marvell,cp110-icu";
-				reg = <0x1e0000 0x10>;
-				#interrupt-cells = <3>;
-				interrupt-controller;
-				msi-parent = <&gicp>;
-			};
-
-			cps_rtc: rtc@284000 {
-				compatible = "marvell,armada-8k-rtc";
-				reg = <0x284000 0x20>, <0x284080 0x24>;
-				reg-names = "rtc", "rtc-soc";
-				interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			cps_syscon0: system-controller@440000 {
-				compatible = "syscon", "simple-mfd";
-				reg = <0x440000 0x2000>;
-
-				cps_clk: clock {
-					compatible = "marvell,cp110-clock";
-					#clock-cells = <2>;
-				};
-
-				cps_gpio1: gpio@100 {
-					compatible = "marvell,armada-8k-gpio";
-					offset = <0x100>;
-					ngpios = <32>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-ranges = <&cps_pinctrl 0 0 32>;
-					interrupt-controller;
-					interrupts = <ICU_GRP_NSR 86 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 85 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 84 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 83 IRQ_TYPE_LEVEL_HIGH>;
-					status = "disabled";
-				};
-
-				cps_gpio2: gpio@140 {
-					compatible = "marvell,armada-8k-gpio";
-					offset = <0x140>;
-					ngpios = <31>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-ranges = <&cps_pinctrl 0 32 31>;
-					interrupt-controller;
-					interrupts = <ICU_GRP_NSR 82 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 81 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 80 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 79 IRQ_TYPE_LEVEL_HIGH>;
-					status = "disabled";
-				};
-
-			};
-
-			cps_usb3_0: usb3@500000 {
-				compatible = "marvell,armada-8k-xhci",
-					     "generic-xhci";
-				reg = <0x500000 0x4000>;
-				dma-coherent;
-				interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&cps_clk 1 22>;
-				status = "disabled";
-			};
-
-			cps_usb3_1: usb3@510000 {
-				compatible = "marvell,armada-8k-xhci",
-					     "generic-xhci";
-				reg = <0x510000 0x4000>;
-				dma-coherent;
-				interrupts = <ICU_GRP_NSR 105 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&cps_clk 1 23>;
-				status = "disabled";
-			};
-
-			cps_sata0: sata@540000 {
-				compatible = "marvell,armada-8k-ahci",
-					     "generic-ahci";
-				reg = <0x540000 0x30000>;
-				interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&cps_clk 1 15>;
-				status = "disabled";
-			};
-
-			cps_xor0: xor@6a0000 {
-				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
-				reg = <0x6a0000 0x1000>,
-				      <0x6b0000 0x1000>;
-				dma-coherent;
-				msi-parent = <&gic_v2m0>;
-				clocks = <&cps_clk 1 8>;
-			};
-
-			cps_xor1: xor@6c0000 {
-				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
-				reg = <0x6c0000 0x1000>,
-				      <0x6d0000 0x1000>;
-				dma-coherent;
-				msi-parent = <&gic_v2m0>;
-				clocks = <&cps_clk 1 7>;
-			};
-
-			cps_spi0: spi@700600 {
-				compatible = "marvell,armada-380-spi";
-				reg = <0x700600 0x50>;
-				#address-cells = <0x1>;
-				#size-cells = <0x0>;
-				cell-index = <3>;
-				clocks = <&cps_clk 1 21>;
-				status = "disabled";
-			};
-
-			cps_spi1: spi@700680 {
-				compatible = "marvell,armada-380-spi";
-				reg = <0x700680 0x50>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <4>;
-				clocks = <&cps_clk 1 21>;
-				status = "disabled";
-			};
-
-			cps_i2c0: i2c@701000 {
-				compatible = "marvell,mv78230-i2c";
-				reg = <0x701000 0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <ICU_GRP_NSR 120 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&cps_clk 1 21>;
-				status = "disabled";
-			};
-
-			cps_i2c1: i2c@701100 {
-				compatible = "marvell,mv78230-i2c";
-				reg = <0x701100 0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <ICU_GRP_NSR 121 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&cps_clk 1 21>;
-				status = "disabled";
-			};
-
-			cps_nand: nand@720000 {
-				/*
-				 * Due to the limiation of the pin available
-				 * this controller is only usable on the CPM
-				 * for A7K and on the CPS for A8K.
-				 */
-				compatible = "marvell,armada370-nand",
-					     "marvell,armada370-nand";
-				reg = <0x720000 0x54>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				interrupts = <ICU_GRP_NSR 115 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&cps_clk 1 2>;
-				status = "disabled";
-			};
-
-			cps_trng: trng@760000 {
-				compatible = "marvell,armada-8k-rng", "inside-secure,safexcel-eip76";
-				reg = <0x760000 0x7d>;
-				interrupts = <ICU_GRP_NSR 95 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&cps_clk 1 25>;
-				status = "okay";
-			};
-
-			cps_crypto: crypto@800000 {
-				compatible = "inside-secure,safexcel-eip197";
-				reg = <0x800000 0x200000>;
-				interrupts = <ICU_GRP_NSR 87 IRQ_TYPE_LEVEL_HIGH>,
-					     <ICU_GRP_NSR 88 IRQ_TYPE_LEVEL_HIGH>,
-					     <ICU_GRP_NSR 89 IRQ_TYPE_LEVEL_HIGH>,
-					     <ICU_GRP_NSR 90 IRQ_TYPE_LEVEL_HIGH>,
-					     <ICU_GRP_NSR 91 IRQ_TYPE_LEVEL_HIGH>,
-					     <ICU_GRP_NSR 92 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "mem", "ring0", "ring1",
-						  "ring2", "ring3", "eip";
-				clocks = <&cps_clk 1 26>;
-				dma-coherent;
-				/*
-				 * The cryptographic engine found on the cp110
-				 * master is enabled by default at the SoC
-				 * level. Because it is not possible as of now
-				 * to enable two cryptographic engines in
-				 * parallel, disable this one by default.
-				 */
-				status = "disabled";
-			};
-		};
-
-		cps_pcie0: pcie@f4600000 {
-			compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
-			reg = <0 0xf4600000 0 0x10000>,
-			      <0 0xfaf00000 0 0x80000>;
-			reg-names = "ctrl", "config";
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			device_type = "pci";
-			dma-coherent;
-			msi-parent = <&gic_v2m0>;
-
-			bus-range = <0 0xff>;
-			ranges =
-				/* downstream I/O */
-				<0x81000000 0 0xfd000000 0  0xfd000000 0 0x10000
-				/* non-prefetchable memory */
-				0x82000000 0 0xfa000000 0  0xfa000000 0 0xf00000>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &cps_icu ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
-			interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
-			num-lanes = <1>;
-			clocks = <&cps_clk 1 13>;
-			status = "disabled";
-		};
-
-		cps_pcie1: pcie@f4620000 {
-			compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
-			reg = <0 0xf4620000 0 0x10000>,
-			      <0 0xfbf00000 0 0x80000>;
-			reg-names = "ctrl", "config";
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			device_type = "pci";
-			dma-coherent;
-			msi-parent = <&gic_v2m0>;
-
-			bus-range = <0 0xff>;
-			ranges =
-				/* downstream I/O */
-				<0x81000000 0 0xfd010000 0  0xfd010000 0 0x10000
-				/* non-prefetchable memory */
-				0x82000000 0 0xfb000000 0  0xfb000000 0 0xf00000>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &cps_icu ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
-			interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
-
-			num-lanes = <1>;
-			clocks = <&cps_clk 1 11>;
-			status = "disabled";
-		};
-
-		cps_pcie2: pcie@f4640000 {
-			compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
-			reg = <0 0xf4640000 0 0x10000>,
-			      <0 0xfcf00000 0 0x80000>;
-			reg-names = "ctrl", "config";
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			device_type = "pci";
-			dma-coherent;
-			msi-parent = <&gic_v2m0>;
-
-			bus-range = <0 0xff>;
-			ranges =
-				/* downstream I/O */
-				<0x81000000 0 0xfd020000 0  0xfd020000 0 0x10000
-				/* non-prefetchable memory */
-				0x82000000 0 0xfc000000 0  0xfc000000 0 0xf00000>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &cps_icu ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
-			interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
-
-			num-lanes = <1>;
-			clocks = <&cps_clk 1 12>;
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
new file mode 100644
index 000000000000..a8af4136dbe7
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ */
+
+/*
+ * Device Tree file for Marvell Armada CP110.
+ */
+
+#include <dt-bindings/interrupt-controller/mvebu-icu.h>
+
+#include "armada-common.dtsi"
+
+#define CP110_PCIEx_IO_BASE(iface)	(CP110_PCIE_IO_BASE + (iface *  0x10000))
+#define CP110_PCIEx_MEM_BASE(iface)	(CP110_PCIE_MEM_BASE + (iface *  0x1000000))
+#define CP110_PCIEx_CONF_BASE(iface)	(CP110_PCIEx_MEM_BASE(iface) + 0xf00000)
+
+/ {
+	/*
+	 * The contents of the node are defined below, in order to
+	 * save one indentation level
+	 */
+	CP110_NAME: CP110_NAME { };
+};
+
+&CP110_NAME {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	compatible = "simple-bus";
+	interrupt-parent = <&CP110_LABEL(icu)>;
+	ranges;
+
+	config-space@CP110_BASE {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x0 0x0 ADDRESSIFY(CP110_BASE) 0x2000000>;
+
+		CP110_LABEL(ethernet): ethernet@0 {
+			compatible = "marvell,armada-7k-pp22";
+			reg = <0x0 0x100000>, <0x129000 0xb000>;
+			clocks = <&CP110_LABEL(clk) 1 3>, <&CP110_LABEL(clk) 1 9>,
+				 <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 18>;
+			clock-names = "pp_clk", "gop_clk",
+				      "mg_clk", "axi_clk";
+			marvell,system-controller = <&CP110_LABEL(syscon0)>;
+			status = "disabled";
+			dma-coherent;
+
+			CP110_LABEL(eth0): eth0 {
+				interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
+					<ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
+					<ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
+					<ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
+					<ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>,
+					<ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
+					"tx-cpu3", "rx-shared", "link";
+				port-id = <0>;
+				gop-port-id = <0>;
+				status = "disabled";
+			};
+
+			CP110_LABEL(eth1): eth1 {
+				interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>,
+					<ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
+					<ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
+					<ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
+					<ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>,
+					<ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
+					"tx-cpu3", "rx-shared", "link";
+				port-id = <1>;
+				gop-port-id = <2>;
+				status = "disabled";
+			};
+
+			CP110_LABEL(eth2): eth2 {
+				interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>,
+					<ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
+					<ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
+					<ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
+					<ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>,
+					<ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
+					"tx-cpu3", "rx-shared", "link";
+				port-id = <2>;
+				gop-port-id = <3>;
+				status = "disabled";
+			};
+		};
+
+		CP110_LABEL(comphy): phy@120000 {
+			compatible = "marvell,comphy-cp110";
+			reg = <0x120000 0x6000>;
+			marvell,system-controller = <&CP110_LABEL(syscon0)>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			CP110_LABEL(comphy0): phy@0 {
+				reg = <0>;
+				#phy-cells = <1>;
+			};
+
+			CP110_LABEL(comphy1): phy@1 {
+				reg = <1>;
+				#phy-cells = <1>;
+			};
+
+			CP110_LABEL(comphy2): phy@2 {
+				reg = <2>;
+				#phy-cells = <1>;
+			};
+
+			CP110_LABEL(comphy3): phy@3 {
+				reg = <3>;
+				#phy-cells = <1>;
+			};
+
+			CP110_LABEL(comphy4): phy@4 {
+				reg = <4>;
+				#phy-cells = <1>;
+			};
+
+			CP110_LABEL(comphy5): phy@5 {
+				reg = <5>;
+				#phy-cells = <1>;
+			};
+		};
+
+		CP110_LABEL(mdio): mdio@12a200 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "marvell,orion-mdio";
+			reg = <0x12a200 0x10>;
+			clocks = <&CP110_LABEL(clk) 1 9>, <&CP110_LABEL(clk) 1 5>,
+				 <&CP110_LABEL(clk) 1 6>, <&CP110_LABEL(clk) 1 18>;
+			status = "disabled";
+		};
+
+		CP110_LABEL(xmdio): mdio@12a600 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "marvell,xmdio";
+			reg = <0x12a600 0x10>;
+			status = "disabled";
+		};
+
+		CP110_LABEL(icu): interrupt-controller@1e0000 {
+			compatible = "marvell,cp110-icu";
+			reg = <0x1e0000 0x10>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			msi-parent = <&gicp>;
+		};
+
+		CP110_LABEL(rtc): rtc@284000 {
+			compatible = "marvell,armada-8k-rtc";
+			reg = <0x284000 0x20>, <0x284080 0x24>;
+			reg-names = "rtc", "rtc-soc";
+			interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		CP110_LABEL(thermal): thermal@400078 {
+			compatible = "marvell,armada-cp110-thermal";
+			reg = <0x400078 0x4>,
+			<0x400070 0x8>;
+		};
+
+		CP110_LABEL(syscon0): system-controller@440000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x440000 0x2000>;
+
+			CP110_LABEL(clk): clock {
+				compatible = "marvell,cp110-clock";
+				#clock-cells = <2>;
+			};
+
+			CP110_LABEL(gpio1): gpio@100 {
+				compatible = "marvell,armada-8k-gpio";
+				offset = <0x100>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&CP110_LABEL(pinctrl) 0 0 32>;
+				interrupt-controller;
+				interrupts = <ICU_GRP_NSR 86 IRQ_TYPE_LEVEL_HIGH>,
+					<ICU_GRP_NSR 85 IRQ_TYPE_LEVEL_HIGH>,
+					<ICU_GRP_NSR 84 IRQ_TYPE_LEVEL_HIGH>,
+					<ICU_GRP_NSR 83 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			CP110_LABEL(gpio2): gpio@140 {
+				compatible = "marvell,armada-8k-gpio";
+				offset = <0x140>;
+				ngpios = <31>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&CP110_LABEL(pinctrl) 0 32 31>;
+				interrupt-controller;
+				interrupts = <ICU_GRP_NSR 82 IRQ_TYPE_LEVEL_HIGH>,
+					<ICU_GRP_NSR 81 IRQ_TYPE_LEVEL_HIGH>,
+					<ICU_GRP_NSR 80 IRQ_TYPE_LEVEL_HIGH>,
+					<ICU_GRP_NSR 79 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		CP110_LABEL(usb3_0): usb3@500000 {
+			compatible = "marvell,armada-8k-xhci",
+			"generic-xhci";
+			reg = <0x500000 0x4000>;
+			dma-coherent;
+			interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&CP110_LABEL(clk) 1 22>;
+			status = "disabled";
+		};
+
+		CP110_LABEL(usb3_1): usb3@510000 {
+			compatible = "marvell,armada-8k-xhci",
+			"generic-xhci";
+			reg = <0x510000 0x4000>;
+			dma-coherent;
+			interrupts = <ICU_GRP_NSR 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&CP110_LABEL(clk) 1 23>;
+			status = "disabled";
+		};
+
+		CP110_LABEL(sata0): sata@540000 {
+			compatible = "marvell,armada-8k-ahci",
+			"generic-ahci";
+			reg = <0x540000 0x30000>;
+			interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&CP110_LABEL(clk) 1 15>;
+			status = "disabled";
+		};
+
+		CP110_LABEL(xor0): xor@6a0000 {
+			compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+			reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>;
+			dma-coherent;
+			msi-parent = <&gic_v2m0>;
+			clocks = <&CP110_LABEL(clk) 1 8>;
+		};
+
+		CP110_LABEL(xor1): xor@6c0000 {
+			compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+			reg = <0x6c0000 0x1000>, <0x6d0000 0x1000>;
+			dma-coherent;
+			msi-parent = <&gic_v2m0>;
+			clocks = <&CP110_LABEL(clk) 1 7>;
+		};
+
+		CP110_LABEL(spi0): spi@700600 {
+			compatible = "marvell,armada-380-spi";
+			reg = <0x700600 0x50>;
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			clocks = <&CP110_LABEL(clk) 1 21>;
+			status = "disabled";
+		};
+
+		CP110_LABEL(spi1): spi@700680 {
+			compatible = "marvell,armada-380-spi";
+			reg = <0x700680 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&CP110_LABEL(clk) 1 21>;
+			status = "disabled";
+		};
+
+		CP110_LABEL(i2c0): i2c@701000 {
+			compatible = "marvell,mv78230-i2c";
+			reg = <0x701000 0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <ICU_GRP_NSR 120 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&CP110_LABEL(clk) 1 21>;
+			status = "disabled";
+		};
+
+		CP110_LABEL(i2c1): i2c@701100 {
+			compatible = "marvell,mv78230-i2c";
+			reg = <0x701100 0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <ICU_GRP_NSR 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&CP110_LABEL(clk) 1 21>;
+			status = "disabled";
+		};
+
+		CP110_LABEL(nand): nand@720000 {
+			/*
+			* Due to the limitation of the pins available
+			* this controller is only usable on the CPM
+			* for A7K and on the CPS for A8K.
+			*/
+			compatible = "marvell,armada-8k-nand",
+			"marvell,armada370-nand";
+			reg = <0x720000 0x54>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupts = <ICU_GRP_NSR 115 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&CP110_LABEL(clk) 1 2>;
+			marvell,system-controller = <&CP110_LABEL(syscon0)>;
+			status = "disabled";
+		};
+
+		CP110_LABEL(trng): trng@760000 {
+			compatible = "marvell,armada-8k-rng",
+			"inside-secure,safexcel-eip76";
+			reg = <0x760000 0x7d>;
+			interrupts = <ICU_GRP_NSR 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&CP110_LABEL(clk) 1 25>;
+			status = "okay";
+		};
+
+		CP110_LABEL(sdhci0): sdhci@780000 {
+			compatible = "marvell,armada-cp110-sdhci";
+			reg = <0x780000 0x300>;
+			interrupts = <ICU_GRP_NSR 27 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "axi";
+			clocks = <&CP110_LABEL(clk) 1 4>, <&CP110_LABEL(clk) 1 18>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		CP110_LABEL(crypto): crypto@800000 {
+			compatible = "inside-secure,safexcel-eip197";
+			reg = <0x800000 0x200000>;
+			interrupts = <ICU_GRP_NSR 87 IRQ_TYPE_LEVEL_HIGH>,
+				<ICU_GRP_NSR 88 IRQ_TYPE_LEVEL_HIGH>,
+				<ICU_GRP_NSR 89 IRQ_TYPE_LEVEL_HIGH>,
+				<ICU_GRP_NSR 90 IRQ_TYPE_LEVEL_HIGH>,
+				<ICU_GRP_NSR 91 IRQ_TYPE_LEVEL_HIGH>,
+				<ICU_GRP_NSR 92 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mem", "ring0", "ring1",
+				"ring2", "ring3", "eip";
+			clocks = <&CP110_LABEL(clk) 1 26>;
+			dma-coherent;
+		};
+	};
+
+	CP110_LABEL(pcie0): pcie@CP110_PCIE0_BASE {
+		compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+		reg = <0 ADDRESSIFY(CP110_PCIE0_BASE) 0 0x10000>,
+		      <0 CP110_PCIEx_CONF_BASE(0) 0 0x80000>;
+		reg-names = "ctrl", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		dma-coherent;
+		msi-parent = <&gic_v2m0>;
+
+		bus-range = <0 0xff>;
+		ranges =
+		/* downstream I/O */
+		<0x81000000 0 CP110_PCIEx_IO_BASE(0) 0  CP110_PCIEx_IO_BASE(0) 0 0x10000
+		/* non-prefetchable memory */
+		0x82000000 0 CP110_PCIEx_MEM_BASE(0) 0  CP110_PCIEx_MEM_BASE(0) 0 0xf00000>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
+		num-lanes = <1>;
+		clocks = <&CP110_LABEL(clk) 1 13>;
+		status = "disabled";
+	};
+
+	CP110_LABEL(pcie1): pcie@CP110_PCIE1_BASE {
+		compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+		reg = <0 ADDRESSIFY(CP110_PCIE1_BASE) 0 0x10000>,
+		      <0 CP110_PCIEx_CONF_BASE(1) 0 0x80000>;
+		reg-names = "ctrl", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		dma-coherent;
+		msi-parent = <&gic_v2m0>;
+
+		bus-range = <0 0xff>;
+		ranges =
+		/* downstream I/O */
+		<0x81000000 0 CP110_PCIEx_IO_BASE(1) 0  CP110_PCIEx_IO_BASE(1) 0 0x10000
+		/* non-prefetchable memory */
+		0x82000000 0 CP110_PCIEx_MEM_BASE(1) 0  CP110_PCIEx_MEM_BASE(1) 0 0xf00000>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
+
+		num-lanes = <1>;
+		clocks = <&CP110_LABEL(clk) 1 11>;
+		status = "disabled";
+	};
+
+	CP110_LABEL(pcie2): pcie@CP110_PCIE2_BASE {
+		compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+		reg = <0 ADDRESSIFY(CP110_PCIE2_BASE) 0 0x10000>,
+		      <0 CP110_PCIEx_CONF_BASE(2) 0 0x80000>;
+		reg-names = "ctrl", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		dma-coherent;
+		msi-parent = <&gic_v2m0>;
+
+		bus-range = <0 0xff>;
+		ranges =
+		/* downstream I/O */
+		<0x81000000 0 CP110_PCIEx_IO_BASE(2) 0  CP110_PCIEx_IO_BASE(2) 0 0x10000
+		/* non-prefetchable memory */
+		0x82000000 0 CP110_PCIEx_MEM_BASE(2) 0  CP110_PCIEx_MEM_BASE(2) 0 0xf00000>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
+
+		num-lanes = <1>;
+		clocks = <&CP110_LABEL(clk) 1 12>;
+		status = "disabled";
+	};
+};