Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC late updates from Arnd Bergmann:
 "This is some material that we picked up into our tree late or that had
  complex inter-depondencies. The fact that there are these
  interdependencies tends to meant that these are often actually the
  most interesting new additions:

   - The new Aspeed AST2600 baseboard management controller is added,
     this is a Cortex-A7 based follow-up to the ARM11 based AST2500 and
     had some dependencies on other device drivers.

   - After many years, support for the MMP2 based OLPC XO-1.75 finally
     makes it into the kernel.

   - The Armada 3720 based Turris Mox open source router platform is a
     late addition and it follows some preparatory work across multiple
     branches.

   - The OMAP2+ platform had some large-scale cleanup involving driver
     changes and DT changes, here we finish it off, dropping a lot of
     the now-unused platform data.

   - The TI K3 platform that got added for 5.3 gains a lot more support
     for individual bits on the SoC, this part just came late for the
     merge window"

[ This pull request itself wasn't actually sent late at all by Arnd, but
  I waited on the branches that it used to be pulled first, so it ends
  up being merged much later than the other ARM SoC pull requests this
  merge window     - Linus ]

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits)
  ARM: dts: dir685: Drop spi-cpol from the display
  ARM: dts: aspeed: Add AST2600 pinmux nodes
  ARM: dts: aspeed: Add AST2600 and EVB
  ARM: exynos: Enable support for ARM architected timers
  ARM: samsung: Fix system restart on S3C6410
  ARM: dts: mmp2: add OLPC XO 1.75 machine
  ARM: dts: mmp2: rename the USB PHY node
  ARM: dts: mmp2: specify reg-shift for the UARTs
  ARM: dts: mmp2: add camera interfaces
  ARM: dts: mmp2: fix the SPI nodes
  ARM: dts: mmp2: trivial whitespace fix
  arm64: dts: marvell: add DTS for Turris Mox
  dt-bindings: marvell: document Turris Mox compatible
  arm64: dts: marvell: armada-37xx: add SPI CS1 pinctrl
  arm64: dts: ti: k3-j721e-main: Fix gic-its node unit-address
  arm64: dts: ti: k3-am65-main: Fix gic-its node unit-address
  arm64: dts: ti: k3-j721e-main: Add hwspinlock node
  arm64: dts: ti: k3-am65-main: Add hwspinlock node
  arm64: dts: k3-j721e: Add gpio-keys on common processor board
  dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721E
  ...

1 files changed, 840 insertions, 0 deletions

diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
new file mode 100644
index 000000000000..d105986c6be1
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -0,0 +1,840 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for CZ.NIC Turris Mox Board
+ * 2019 by Marek Behun <marek.behun@nic.cz>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/bus/moxtet.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-372x.dtsi"
+
+/ {
+	model = "CZ.NIC Turris Mox Board";
+	compatible = "cznic,turris-mox", "marvell,armada3720",
+		     "marvell,armada3710";
+
+	aliases {
+		spi0 = &spi0;
+		ethernet1 = &eth1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		red {
+			label = "mox:red:activity";
+			gpios = <&gpiosb 21 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpiosb 20 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+
+	exp_usb3_vbus: usb3-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		gpio = <&gpiosb 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	usb3_phy: usb3-phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&exp_usb3_vbus>;
+	};
+
+	vsdc_reg: vsdc-reg {
+		compatible = "regulator-gpio";
+		regulator-name = "vsdc";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+
+		gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+		states = <1800000 0x1
+			  3300000 0x0>;
+		enable-active-high;
+	};
+
+	vsdio_reg: vsdio-reg {
+		compatible = "regulator-gpio";
+		regulator-name = "vsdio";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+
+		gpios = <&gpiosb 22 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+		states = <1800000 0x1
+			  3300000 0x0>;
+		enable-active-high;
+	};
+
+	sdhci1_pwrseq: sdhci1-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpionb 19 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	sfp: sfp {
+		compatible = "sff,sfp+";
+		i2c-bus = <&i2c0>;
+		los-gpio = <&moxtet_sfp 0 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio = <&moxtet_sfp 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&moxtet_sfp 2 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&moxtet_sfp 4 GPIO_ACTIVE_HIGH>;
+		rate-select0-gpio = <&moxtet_sfp 5 GPIO_ACTIVE_HIGH>;
+
+		/* enabled by U-Boot if SFP module is present */
+		status = "disabled";
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	rtc@6f {
+		compatible = "microchip,mcp7940x";
+		reg = <0x6f>;
+	};
+};
+
+&pcie_reset_pins {
+	function = "gpio";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
+	status = "okay";
+	max-link-speed = <2>;
+	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
+	phys = <&comphy1 0>;
+
+	/* enabled by U-Boot if PCIe module is present */
+	status = "disabled";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&eth0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii-id";
+	phy = <&phy1>;
+	status = "okay";
+};
+
+&eth1 {
+	phy-mode = "2500base-x";
+	managed = "in-band-status";
+	phys = <&comphy0 1>;
+};
+
+&sdhci0 {
+	wp-inverted;
+	bus-width = <4>;
+	cd-gpios = <&gpionb 10 GPIO_ACTIVE_HIGH>;
+	vqmmc-supply = <&vsdc_reg>;
+	marvell,pad-type = "sd";
+	status = "okay";
+};
+
+&sdhci1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio_pins>;
+	non-removable;
+	bus-width = <4>;
+	marvell,pad-type = "sd";
+	vqmmc-supply = <&vsdio_reg>;
+	mmc-pwrseq = <&sdhci1_pwrseq>;
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_quad_pins &spi_cs1_pins>;
+	assigned-clocks = <&nb_periph_clk 7>;
+	assigned-clock-parents = <&tbg 1>;
+	assigned-clock-rates = <20000000>;
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "secure-firmware";
+				reg = <0x0 0x20000>;
+			};
+
+			partition@20000 {
+				label = "u-boot";
+				reg = <0x20000 0x160000>;
+			};
+
+			partition@180000 {
+				label = "u-boot-env";
+				reg = <0x180000 0x10000>;
+			};
+
+			partition@190000 {
+				label = "Rescue system";
+				reg = <0x190000 0x660000>;
+			};
+
+			partition@7f0000 {
+				label = "dtb";
+				reg = <0x7f0000 0x10000>;
+			};
+		};
+	};
+
+	moxtet: moxtet@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "cznic,moxtet";
+		reg = <1>;
+		reset-gpios = <&gpiosb 2 GPIO_ACTIVE_LOW>;
+		spi-max-frequency = <10000000>;
+		spi-cpol;
+		spi-cpha;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupt-parent = <&gpiosb>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+		status = "okay";
+
+		moxtet_sfp: gpio@0 {
+			compatible = "cznic,moxtet-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0>;
+			status = "disabled";
+		};
+	};
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+	phys = <&comphy2 0>;
+	usb-phy = <&usb3_phy>;
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&smi_pins>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	/* switch nodes are enabled by U-Boot if modules are present */
+	switch0@10 {
+		compatible = "marvell,mv88e6190";
+		reg = <0x10 0>;
+		dsa,member = <0 0>;
+		interrupt-parent = <&moxtet>;
+		interrupts = <MOXTET_IRQ_PERIDOT(0)>;
+		status = "disabled";
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy1: switch0phy1@1 {
+				reg = <0x1>;
+			};
+
+			switch0phy2: switch0phy2@2 {
+				reg = <0x2>;
+			};
+
+			switch0phy3: switch0phy3@3 {
+				reg = <0x3>;
+			};
+
+			switch0phy4: switch0phy4@4 {
+				reg = <0x4>;
+			};
+
+			switch0phy5: switch0phy5@5 {
+				reg = <0x5>;
+			};
+
+			switch0phy6: switch0phy6@6 {
+				reg = <0x6>;
+			};
+
+			switch0phy7: switch0phy7@7 {
+				reg = <0x7>;
+			};
+
+			switch0phy8: switch0phy8@8 {
+				reg = <0x8>;
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <0x1>;
+				label = "lan1";
+				phy-handle = <&switch0phy1>;
+			};
+
+			port@2 {
+				reg = <0x2>;
+				label = "lan2";
+				phy-handle = <&switch0phy2>;
+			};
+
+			port@3 {
+				reg = <0x3>;
+				label = "lan3";
+				phy-handle = <&switch0phy3>;
+			};
+
+			port@4 {
+				reg = <0x4>;
+				label = "lan4";
+				phy-handle = <&switch0phy4>;
+			};
+
+			port@5 {
+				reg = <0x5>;
+				label = "lan5";
+				phy-handle = <&switch0phy5>;
+			};
+
+			port@6 {
+				reg = <0x6>;
+				label = "lan6";
+				phy-handle = <&switch0phy6>;
+			};
+
+			port@7 {
+				reg = <0x7>;
+				label = "lan7";
+				phy-handle = <&switch0phy7>;
+			};
+
+			port@8 {
+				reg = <0x8>;
+				label = "lan8";
+				phy-handle = <&switch0phy8>;
+			};
+
+			port@9 {
+				reg = <0x9>;
+				label = "cpu";
+				ethernet = <&eth1>;
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+			};
+
+			switch0port10: port@a {
+				reg = <0xa>;
+				label = "dsa";
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+				link = <&switch1port9 &switch2port9>;
+				status = "disabled";
+			};
+
+			port-sfp@a {
+				reg = <0xa>;
+				label = "sfp";
+				sfp = <&sfp>;
+				phy-mode = "sgmii";
+				managed = "in-band-status";
+				status = "disabled";
+			};
+		};
+	};
+
+	switch0@2 {
+		compatible = "marvell,mv88e6085";
+		reg = <0x2 0>;
+		dsa,member = <0 0>;
+		interrupt-parent = <&moxtet>;
+		interrupts = <MOXTET_IRQ_TOPAZ>;
+		status = "disabled";
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy1_topaz: switch0phy1@11 {
+				reg = <0x11>;
+			};
+
+			switch0phy2_topaz: switch0phy2@12 {
+				reg = <0x12>;
+			};
+
+			switch0phy3_topaz: switch0phy3@13 {
+				reg = <0x13>;
+			};
+
+			switch0phy4_topaz: switch0phy4@14 {
+				reg = <0x14>;
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <0x1>;
+				label = "lan1";
+				phy-handle = <&switch0phy1_topaz>;
+			};
+
+			port@2 {
+				reg = <0x2>;
+				label = "lan2";
+				phy-handle = <&switch0phy2_topaz>;
+			};
+
+			port@3 {
+				reg = <0x3>;
+				label = "lan3";
+				phy-handle = <&switch0phy3_topaz>;
+			};
+
+			port@4 {
+				reg = <0x4>;
+				label = "lan4";
+				phy-handle = <&switch0phy4_topaz>;
+			};
+
+			port@5 {
+				reg = <0x5>;
+				label = "cpu";
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+				ethernet = <&eth1>;
+			};
+		};
+	};
+
+	switch1@11 {
+		compatible = "marvell,mv88e6190";
+		reg = <0x11 0>;
+		dsa,member = <0 1>;
+		interrupt-parent = <&moxtet>;
+		interrupts = <MOXTET_IRQ_PERIDOT(1)>;
+		status = "disabled";
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch1phy1: switch1phy1@1 {
+				reg = <0x1>;
+			};
+
+			switch1phy2: switch1phy2@2 {
+				reg = <0x2>;
+			};
+
+			switch1phy3: switch1phy3@3 {
+				reg = <0x3>;
+			};
+
+			switch1phy4: switch1phy4@4 {
+				reg = <0x4>;
+			};
+
+			switch1phy5: switch1phy5@5 {
+				reg = <0x5>;
+			};
+
+			switch1phy6: switch1phy6@6 {
+				reg = <0x6>;
+			};
+
+			switch1phy7: switch1phy7@7 {
+				reg = <0x7>;
+			};
+
+			switch1phy8: switch1phy8@8 {
+				reg = <0x8>;
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <0x1>;
+				label = "lan9";
+				phy-handle = <&switch1phy1>;
+			};
+
+			port@2 {
+				reg = <0x2>;
+				label = "lan10";
+				phy-handle = <&switch1phy2>;
+			};
+
+			port@3 {
+				reg = <0x3>;
+				label = "lan11";
+				phy-handle = <&switch1phy3>;
+			};
+
+			port@4 {
+				reg = <0x4>;
+				label = "lan12";
+				phy-handle = <&switch1phy4>;
+			};
+
+			port@5 {
+				reg = <0x5>;
+				label = "lan13";
+				phy-handle = <&switch1phy5>;
+			};
+
+			port@6 {
+				reg = <0x6>;
+				label = "lan14";
+				phy-handle = <&switch1phy6>;
+			};
+
+			port@7 {
+				reg = <0x7>;
+				label = "lan15";
+				phy-handle = <&switch1phy7>;
+			};
+
+			port@8 {
+				reg = <0x8>;
+				label = "lan16";
+				phy-handle = <&switch1phy8>;
+			};
+
+			switch1port9: port@9 {
+				reg = <0x9>;
+				label = "dsa";
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+				link = <&switch0port10>;
+			};
+
+			switch1port10: port@a {
+				reg = <0xa>;
+				label = "dsa";
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+				link = <&switch2port9>;
+				status = "disabled";
+			};
+
+			port-sfp@a {
+				reg = <0xa>;
+				label = "sfp";
+				sfp = <&sfp>;
+				phy-mode = "sgmii";
+				managed = "in-band-status";
+				status = "disabled";
+			};
+		};
+	};
+
+	switch1@2 {
+		compatible = "marvell,mv88e6085";
+		reg = <0x2 0>;
+		dsa,member = <0 1>;
+		interrupt-parent = <&moxtet>;
+		interrupts = <MOXTET_IRQ_TOPAZ>;
+		status = "disabled";
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch1phy1_topaz: switch1phy1@11 {
+				reg = <0x11>;
+			};
+
+			switch1phy2_topaz: switch1phy2@12 {
+				reg = <0x12>;
+			};
+
+			switch1phy3_topaz: switch1phy3@13 {
+				reg = <0x13>;
+			};
+
+			switch1phy4_topaz: switch1phy4@14 {
+				reg = <0x14>;
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <0x1>;
+				label = "lan9";
+				phy-handle = <&switch1phy1_topaz>;
+			};
+
+			port@2 {
+				reg = <0x2>;
+				label = "lan10";
+				phy-handle = <&switch1phy2_topaz>;
+			};
+
+			port@3 {
+				reg = <0x3>;
+				label = "lan11";
+				phy-handle = <&switch1phy3_topaz>;
+			};
+
+			port@4 {
+				reg = <0x4>;
+				label = "lan12";
+				phy-handle = <&switch1phy4_topaz>;
+			};
+
+			port@5 {
+				reg = <0x5>;
+				label = "dsa";
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+				link = <&switch0port10>;
+			};
+		};
+	};
+
+	switch2@12 {
+		compatible = "marvell,mv88e6190";
+		reg = <0x12 0>;
+		dsa,member = <0 2>;
+		interrupt-parent = <&moxtet>;
+		interrupts = <MOXTET_IRQ_PERIDOT(2)>;
+		status = "disabled";
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch2phy1: switch2phy1@1 {
+				reg = <0x1>;
+			};
+
+			switch2phy2: switch2phy2@2 {
+				reg = <0x2>;
+			};
+
+			switch2phy3: switch2phy3@3 {
+				reg = <0x3>;
+			};
+
+			switch2phy4: switch2phy4@4 {
+				reg = <0x4>;
+			};
+
+			switch2phy5: switch2phy5@5 {
+				reg = <0x5>;
+			};
+
+			switch2phy6: switch2phy6@6 {
+				reg = <0x6>;
+			};
+
+			switch2phy7: switch2phy7@7 {
+				reg = <0x7>;
+			};
+
+			switch2phy8: switch2phy8@8 {
+				reg = <0x8>;
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <0x1>;
+				label = "lan17";
+				phy-handle = <&switch2phy1>;
+			};
+
+			port@2 {
+				reg = <0x2>;
+				label = "lan18";
+				phy-handle = <&switch2phy2>;
+			};
+
+			port@3 {
+				reg = <0x3>;
+				label = "lan19";
+				phy-handle = <&switch2phy3>;
+			};
+
+			port@4 {
+				reg = <0x4>;
+				label = "lan20";
+				phy-handle = <&switch2phy4>;
+			};
+
+			port@5 {
+				reg = <0x5>;
+				label = "lan21";
+				phy-handle = <&switch2phy5>;
+			};
+
+			port@6 {
+				reg = <0x6>;
+				label = "lan22";
+				phy-handle = <&switch2phy6>;
+			};
+
+			port@7 {
+				reg = <0x7>;
+				label = "lan23";
+				phy-handle = <&switch2phy7>;
+			};
+
+			port@8 {
+				reg = <0x8>;
+				label = "lan24";
+				phy-handle = <&switch2phy8>;
+			};
+
+			switch2port9: port@9 {
+				reg = <0x9>;
+				label = "dsa";
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+				link = <&switch1port10 &switch0port10>;
+			};
+
+			port-sfp@a {
+				reg = <0xa>;
+				label = "sfp";
+				sfp = <&sfp>;
+				phy-mode = "sgmii";
+				managed = "in-band-status";
+				status = "disabled";
+			};
+		};
+	};
+
+	switch2@2 {
+		compatible = "marvell,mv88e6085";
+		reg = <0x2 0>;
+		dsa,member = <0 2>;
+		interrupt-parent = <&moxtet>;
+		interrupts = <MOXTET_IRQ_TOPAZ>;
+		status = "disabled";
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch2phy1_topaz: switch2phy1@11 {
+				reg = <0x11>;
+			};
+
+			switch2phy2_topaz: switch2phy2@12 {
+				reg = <0x12>;
+			};
+
+			switch2phy3_topaz: switch2phy3@13 {
+				reg = <0x13>;
+			};
+
+			switch2phy4_topaz: switch2phy4@14 {
+				reg = <0x14>;
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <0x1>;
+				label = "lan17";
+				phy-handle = <&switch2phy1_topaz>;
+			};
+
+			port@2 {
+				reg = <0x2>;
+				label = "lan18";
+				phy-handle = <&switch2phy2_topaz>;
+			};
+
+			port@3 {
+				reg = <0x3>;
+				label = "lan19";
+				phy-handle = <&switch2phy3_topaz>;
+			};
+
+			port@4 {
+				reg = <0x4>;
+				label = "lan20";
+				phy-handle = <&switch2phy4_topaz>;
+			};
+
+			port@5 {
+				reg = <0x5>;
+				label = "dsa";
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+				link = <&switch1port10 &switch0port10>;
+			};
+		};
+	};
+};