Merge tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM device tree updates from Arnd Bergmann:
 "Across all platforms, there is a continued move towards DT schema for
  validating the dts files. As a result there are bug fixes for mistakes
  that are found using these schema, in addition to warnings from the
  dtc compiler.

  As usual, many changes are for adding support for additional on-chip
  and on-board components in the machines we already support.

  The newly supported SoCs for this release are:

   - MStar Infinity2M, a low-end IP camera chip based on a dual-core
     Cortex-A7, otherwise similar to the Infinity chip we already
     support. This is also known as the SigmaStar SSD202D, and we add
     support for the Honestar ssd201htv2 development kit.

   - Nuvoton NPCM730, a Cortex-A9 based Baseboard Management Controller
     (BMC), in the same family as the NPCM750. This gets used in the
     Ampere Altra based "Fii Kudo" server and the Quanta GSJ, both of
     which are added as well.

   - Broadcom BCM4908, a 64-bit home router chip based on Broadcom's own
     Brahma-B53 CPU. Support is also added for the Asus ROG Rapture
     GT-AC5300 high-end WiFi router based on this chip.

   - Mediatek MT8192 is a new SoC based on eight Cortex-A76/A55 cores,
     meant for faster Chromebooks and tablets. It gets added along with
     its reference design.

   - Mediatek MT6779 (Helio P90) is a high-end phone chip from last
     year's generation, also added along with its reference board. This
     one is still based on Cortex-A75/A55.

   - Mediatek MT8167 is a version of the already supported MT8516 chip,
     both based on Cortex-A35. It gets added along with the "Pumpkin"
     single board computer, but is likely to also make its way into
     low-end tablets in the future.

  For the already supported chips, there are a number of new boards.
  Interestingly there are more 32-bit machines added this time than
  64-bit. Here is a brief list of the new boards:

   - Three new Mikrotik router variants based on Marvell Prestera
     98DX3236, a close relative of the more common Armada XP

   - A reference board for the Marvell Armada 382

   - Three new servers using ASpeed baseboard management controllers,
     the actual machines being from Bytedance, Facebook and IBM, and one
     machine using the Nuvoton NPCM750 BMC.

   - The Galaxy Note 10.1 (P4) tablet, using an Exynos 4412.

   - The usual set of 32-bit i.MX industrial/embedded hardware:
       * Protonic WD3 (tractor e-cockpit)
       * Kamstrup OMNIA Flex Concentrator (smart grid platform)
       * Van der Laan LANMCU (food storage)
       * Altesco I6P (vehicle inspection stations)
       * PHYTEC phyBOARD-Segin/phyCORE-i.MX6UL baseboard

   - DH electronics STM32MP157C DHCOM, a PicoITX carrier board for the
     aleady supported DHCOM module

   - Three new Allwinner SoC based single-board computers:
       * NanoPi R1 (H3 based)
       * FriendlyArm ZeroPi (H3 based)
       * Elimo Initium SBC (S3 based)

   - Ouya Game Console based on Nvidia Tegra 3

   - Version 5 of the already supported Zynq Z-Turn MYIR Board

   - LX2162AQDS, a reference platform for NXP Layerscape LX2162A, which
     is a repackaged 16-core LX2160A

   - A series of Kontron i.MX8M Mini baseboard/SoM versions

   - Espressobin Ultra, a new variant of the popular Armada 3700 based
     board,

   - IEI Puzzle-M801, a rackmount network appliance based on Marvell
     Armada 8040

   - Microsoft Lumia 950 XL, a phone

   - HDK855 and HDK865 Hardware development kits for Qualcomm sm8250 and
     sm8150, respectively

   - Three new board variants of the "Trogdor" Chromebook (sc7180)

   - New board variants of the Renesas based "Kingfisher" and "HiHope"
     reference boards

   - Kobol Helios64, an open source NAS appliance based on Rockchips
     RK3399

   - Engicam PX30.Core, a SoM based on Rockchip PX30, along with a few
     carrier boards"

* tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (679 commits)
  arm64: dts: sparx5: Add SGPIO devices
  arm64: dts: sparx5: Add reset support
  dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver
  ARM: mstar: SMP support
  ARM: mstar: Wire up smpctrl for SSD201/SSD202D
  ARM: mstar: Add smp ctrl registers to infinity2m dtsi
  ARM: mstar: Add dts for Honestar ssd201htv2
  ARM: mstar: Add chip level dtsi for SSD202D
  ARM: mstar: Add common dtsi for SSD201/SSD202D
  ARM: mstar: Add infinity2m support
  dt-bindings: mstar: Add Honestar SSD201_HT_V2 to mstar boards
  dt-bindings: vendor-prefixes: Add honestar vendor prefix
  dt-bindings: mstar: Add binding details for mstar,smpctrl
  ARM: mstar: Fill in GPIO controller properties for infinity
  ARM: mstar: Add gpio controller to MStar base dtsi
  ARM: zynq: Fix incorrect reference to XM013 instead of XM011
  ARM: zynq: Convert at25 binding to new description on zc770-xm013
  ARM: zynq: Fix OCM mapping to be aligned with binding on zc702
  ARM: zynq: Fix leds subnode name for zc702/zybo-z7
  ARM: zynq: Rename bus to be align with simple-bus yaml
  ...

1 files changed, 48 insertions, 5 deletions

diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 05ee062548e4..c824f2615fe8 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -194,16 +194,16 @@
 	pmu {
 		compatible = "arm,armv8-pmuv3";
 		interrupts = <GIC_PPI 7
-			     (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+			     (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>;
 	};
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, /* Virtual */
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Virtual */
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */
 		clock-frequency = <8000000>;
 		arm,no-tick-in-suspend;
 	};
@@ -339,6 +339,49 @@
 				status = "disabled";
 			};
 
+			micfil: audio-controller@30080000 {
+				compatible = "fsl,imx8mm-micfil";
+				reg = <0x30080000 0x10000>;
+				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_PDM_IPG>,
+					 <&clk IMX8MM_CLK_PDM_ROOT>,
+					 <&clk IMX8MM_AUDIO_PLL1_OUT>,
+					 <&clk IMX8MM_AUDIO_PLL2_OUT>,
+					 <&clk IMX8MM_CLK_EXT3>;
+				clock-names = "ipg_clk", "ipg_clk_app",
+					      "pll8k", "pll11k", "clkext3";
+				dmas = <&sdma2 24 25 0x80000000>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
+			spdif1: spdif@30090000 {
+				compatible = "fsl,imx35-spdif";
+				reg = <0x30090000 0x10000>;
+				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, /* core */
+					 <&clk IMX8MM_CLK_24M>, /* rxtx0 */
+					 <&clk IMX8MM_CLK_SPDIF1>, /* rxtx1 */
+					 <&clk IMX8MM_CLK_DUMMY>, /* rxtx2 */
+					 <&clk IMX8MM_CLK_DUMMY>, /* rxtx3 */
+					 <&clk IMX8MM_CLK_DUMMY>, /* rxtx4 */
+					 <&clk IMX8MM_CLK_AUDIO_AHB>, /* rxtx5 */
+					 <&clk IMX8MM_CLK_DUMMY>, /* rxtx6 */
+					 <&clk IMX8MM_CLK_DUMMY>, /* rxtx7 */
+					 <&clk IMX8MM_CLK_DUMMY>; /* spba */
+				clock-names = "core", "rxtx0",
+					      "rxtx1", "rxtx2",
+					      "rxtx3", "rxtx4",
+					      "rxtx5", "rxtx6",
+					      "rxtx7", "spba";
+				dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
 			gpio1: gpio@30200000 {
 				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
 				reg = <0x30200000 0x10000>;