diff options
| author | Sam Protsenko <semen.protsenko@linaro.org> | 2023-08-26 00:54:44 +0300 |
|---|---|---|
| committer | Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> | 2023-09-11 14:21:27 +0300 |
| commit | 2f911ca41e519dc5986f9483d3e15df4802b64f5 (patch) | |
| tree | a42d5b887005e60763f94496ece97f2dd276aec1 /arch/arm64/boot/dts/exynos/exynos850.dtsi | |
| parent | 0bb80ecc33a8fb5a682236443c1e740d5c917d1d (diff) | |
| download | linux-2f911ca41e519dc5986f9483d3e15df4802b64f5.tar.xz | |
arm64: dts: exynos: Enable USB in Exynos850
Add USB controller and USB PHY controller nodes for Exynos850 SoC.
The USB controller has next features:
- Dual Role Device (DRD) controller
- DWC3 compatible
- Supports USB 2.0 host and USB 2.0 device interfaces
- Supports full-speed (12 Mbps) and high-speed (480 Mbps) modes with
USB device 2.0 interface
- Supports on-chip USB PHY transceiver
- Supports up to 16 bi-directional endpoints (that includes control
endpoint 0)
- Complies with xHCI 1.00 specification
Only USB 2.0 is supported in Exynos850, so only UTMI+ PHY interface is
specified in "phys" property (index 0) and PIPE3 is omitted (index 1).
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20230825215445.28309-2-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Diffstat (limited to 'arch/arm64/boot/dts/exynos/exynos850.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/exynos/exynos850.dtsi | 30 |
1 files changed, 30 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/exynos/exynos850.dtsi b/arch/arm64/boot/dts/exynos/exynos850.dtsi index aa077008b3be..53104e65b9c6 100644 --- a/arch/arm64/boot/dts/exynos/exynos850.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos850.dtsi @@ -570,6 +570,36 @@ clocks = <&cmu_cmgp CLK_GOUT_SYSREG_CMGP_PCLK>; }; + usbdrd: usb@13600000 { + compatible = "samsung,exynos850-dwusb3"; + ranges = <0x0 0x13600000 0x10000>; + clocks = <&cmu_hsi CLK_GOUT_USB_BUS_EARLY_CLK>, + <&cmu_hsi CLK_GOUT_USB_REF_CLK>; + clock-names = "bus_early", "ref"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + usbdrd_dwc3: usb@0 { + compatible = "snps,dwc3"; + reg = <0x0 0x10000>; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usbdrd_phy 0>; + phy-names = "usb2-phy"; + }; + }; + + usbdrd_phy: phy@135d0000 { + compatible = "samsung,exynos850-usbdrd-phy"; + reg = <0x135d0000 0x100>; + clocks = <&cmu_hsi CLK_GOUT_USB_PHY_ACLK>, + <&cmu_hsi CLK_GOUT_USB_PHY_REF_CLK>; + clock-names = "phy", "ref"; + samsung,pmu-syscon = <&pmu_system_controller>; + #phy-cells = <1>; + status = "disabled"; + }; + usi_uart: usi@138200c0 { compatible = "samsung,exynos850-usi"; reg = <0x138200c0 0x20>; |