ARM: dts: bcm283x: Move the BCM2837 DT contents from arm64 to arm.

BCM2837 is somewhat unusual in that we build its DT on both arm32 and
arm64.  Most devices are being run in arm32 mode.

Having the body of the DT for 2837 separate from 2835/6 has been a
source of pain, as we often need to make changes that span both
directories simultaneously (for example, the thermal changes for 4.13,
or anything that changes the name of a node referenced by '&' from
board files).  Other changes are made more complicated than they need
to be, such as the SDHOST enabling, because we have to split a single
logical change into a 283[56] half and a 2837 half.

To fix this, make the stub board include file live in arm64 instead of
arm32, and keep all of BCM283x's contents in arm32.  From here on, our
changes to DT contents can be submitted through a single tree.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

6 files changed, 1 insertions, 131 deletions

diff --git a/arch/arm64/boot/dts/broadcom/bcm2835-rpi.dtsi b/arch/arm64/boot/dts/broadcom/bcm2835-rpi.dtsi
deleted file mode 120000
index 3937b77cb310..000000000000
--- a/arch/arm64/boot/dts/broadcom/bcm2835-rpi.dtsi
+++ /dev/null
@@ -1 +0,0 @@
-../../../../arm/boot/dts/bcm2835-rpi.dtsi
\ No newline at end of file
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
index 972f14db28ac..699d340a3437 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
@@ -1,41 +1 @@
-/dts-v1/;
-#include "bcm2837.dtsi"
-#include "bcm2835-rpi.dtsi"
-#include "bcm283x-rpi-smsc9514.dtsi"
-#include "bcm283x-rpi-usb-host.dtsi"
-
-/ {
-	compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
-	model = "Raspberry Pi 3 Model B";
-
-	memory {
-		reg = <0 0x40000000>;
-	};
-
-	leds {
-		act {
-			gpios = <&gpio 47 0>;
-		};
-	};
-};
-
-&uart1 {
-	status = "okay";
-};
-
-/* SDHCI is used to control the SDIO for wireless */
-&sdhci {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_gpio34>;
-	status = "okay";
-	bus-width = <4>;
-	non-removable;
-};
-
-/* SDHOST is used to drive the SD card */
-&sdhost {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhost_gpio48>;
-	status = "okay";
-	bus-width = <4>;
-};
+#include "arm/bcm2837-rpi-3-b.dts"
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837.dtsi b/arch/arm64/boot/dts/broadcom/bcm2837.dtsi
deleted file mode 100644
index 2d5de6f0f78d..000000000000
--- a/arch/arm64/boot/dts/broadcom/bcm2837.dtsi
+++ /dev/null
@@ -1,86 +0,0 @@
-#include "bcm283x.dtsi"
-
-/ {
-	compatible = "brcm,bcm2837";
-
-	soc {
-		ranges = <0x7e000000 0x3f000000 0x1000000>,
-			 <0x40000000 0x40000000 0x00001000>;
-		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
-
-		local_intc: local_intc {
-			compatible = "brcm,bcm2836-l1-intc";
-			reg = <0x40000000 0x100>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			interrupt-parent = <&local_intc>;
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupt-parent = <&local_intc>;
-		interrupts = <0>, // PHYS_SECURE_PPI
-			     <1>, // PHYS_NONSECURE_PPI
-			     <3>, // VIRT_PPI
-			     <2>; // HYP_PPI
-		always-on;
-	};
-
-	cpus: cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x000000d8>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <1>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x000000e0>;
-		};
-
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <2>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x000000e8>;
-		};
-
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <3>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x000000f0>;
-		};
-	};
-};
-
-/* Make the BCM2835-style global interrupt controller be a child of the
- * CPU-local interrupt controller.
- */
-&intc {
-	compatible = "brcm,bcm2836-armctrl-ic";
-	reg = <0x7e00b200 0x200>;
-	interrupt-parent = <&local_intc>;
-	interrupts = <8>;
-};
-
-&cpu_thermal {
-	coefficients = <(-538)	412000>;
-};
-
-/* enable thermal sensor with the correct compatible property set */
-&thermal {
-	compatible = "brcm,bcm2837-thermal";
-	status = "okay";
-};
diff --git a/arch/arm64/boot/dts/broadcom/bcm283x-rpi-smsc9514.dtsi b/arch/arm64/boot/dts/broadcom/bcm283x-rpi-smsc9514.dtsi
deleted file mode 120000
index dca7c057d5a5..000000000000
--- a/arch/arm64/boot/dts/broadcom/bcm283x-rpi-smsc9514.dtsi
+++ /dev/null
@@ -1 +0,0 @@
-../../../../arm/boot/dts/bcm283x-rpi-smsc9514.dtsi
\ No newline at end of file
diff --git a/arch/arm64/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi b/arch/arm64/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi
deleted file mode 120000
index cbeebe312ff8..000000000000
--- a/arch/arm64/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi
+++ /dev/null
@@ -1 +0,0 @@
-../../../../arm/boot/dts/bcm283x-rpi-usb-host.dtsi
\ No newline at end of file
diff --git a/arch/arm64/boot/dts/broadcom/bcm283x.dtsi b/arch/arm64/boot/dts/broadcom/bcm283x.dtsi
deleted file mode 120000
index 5f54e4cab99b..000000000000
--- a/arch/arm64/boot/dts/broadcom/bcm283x.dtsi
+++ /dev/null
@@ -1 +0,0 @@
-../../../../arm/boot/dts/bcm283x.dtsi
\ No newline at end of file