Merge tag 'pinctrl' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm soc-specific pinctrl changes from Olof Johansson:
 "With this, five platforms are moving to the relatively new pinctrl
  subsystem for their pin management, replacing the older soc specific
  in-kernel interfaces with common code.

  There is quite a bit of net addition of code for each platform being
  added to the pinctrl subsystem.  But the payback comes later when
  adding new boards can be done by only providing new device trees
  instead."

Fix up trivial conflicts in arch/arm/mach-ux500/{Makefile,board-mop500.c}

* tag 'pinctrl' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (61 commits)
  mtd: nand: gpmi: fix compile error caused by pinctrl call
  ARM: PRIMA2: select PINCTRL and PINCTRL_SIRF in Kconfig
  ARM: nomadik: enable PINCTRL_NOMADIK where needed
  ARM: mxs: enable pinctrl support
  video: mxsfb: adopt pinctrl support
  ASoC: mxs-saif: adopt pinctrl support
  i2c: mxs: adopt pinctrl support
  mtd: nand: gpmi: adopt pinctrl support
  mmc: mxs-mmc: adopt pinctrl support
  serial: mxs-auart: adopt pinctrl support
  serial: amba-pl011: adopt pinctrl support
  spi/imx: adopt pinctrl support
  i2c: imx: adopt pinctrl support
  can: flexcan: adopt pinctrl support
  net: fec: adopt pinctrl support
  ARM: ux500: switch MSP to using pinctrl for pins
  ARM: ux500: alter MSP registration to return a device pointer
  ARM: ux500: switch to using pinctrl for uart0
  ARM: ux500: delete custom pin control system
  ARM: ux500: switch over to Nomadik pinctrl driver
  ...

4 files changed, 2 insertions, 257 deletions

diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig
index 6c066fcb2979..387655b5ce05 100644
--- a/arch/arm/plat-spear/Kconfig
+++ b/arch/arm/plat-spear/Kconfig
@@ -13,6 +13,7 @@ config ARCH_SPEAR3XX
 	select ARM_VIC
 	select CPU_ARM926T
 	select USE_OF
+	select PINCTRL
 	help
 	  Supports for ARM's SPEAR3XX family
 
diff --git a/arch/arm/plat-spear/Makefile b/arch/arm/plat-spear/Makefile
index 4af6258d0fee..7744802c83e7 100644
--- a/arch/arm/plat-spear/Makefile
+++ b/arch/arm/plat-spear/Makefile
@@ -5,4 +5,4 @@
 # Common support
 obj-y	:= clock.o restart.o time.o pl080.o
 
-obj-$(CONFIG_ARCH_SPEAR3XX)	+= shirq.o padmux.o
+obj-$(CONFIG_ARCH_SPEAR3XX)	+= shirq.o
diff --git a/arch/arm/plat-spear/include/plat/padmux.h b/arch/arm/plat-spear/include/plat/padmux.h
deleted file mode 100644
index 877f3adcf610..000000000000
--- a/arch/arm/plat-spear/include/plat/padmux.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/padmux.h
- *
- * SPEAr platform specific gpio pads muxing file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_PADMUX_H
-#define __PLAT_PADMUX_H
-
-#include <linux/types.h>
-
-/*
- * struct pmx_reg: configuration structure for mode reg and mux reg
- *
- * offset: offset of mode reg
- * mask: mask of mode reg
- */
-struct pmx_reg {
-	u32 offset;
-	u32 mask;
-};
-
-/*
- * struct pmx_dev_mode: configuration structure every group of modes of a device
- *
- * ids: all modes for this configuration
- * mask: mask for supported mode
- */
-struct pmx_dev_mode {
-	u32 ids;
-	u32 mask;
-};
-
-/*
- * struct pmx_mode: mode definition structure
- *
- * name: mode name
- * mask: mode mask
- */
-struct pmx_mode {
-	char *name;
-	u32 id;
-	u32 mask;
-};
-
-/*
- * struct pmx_dev: device definition structure
- *
- * name: device name
- * modes: device configuration array for different modes supported
- * mode_count: size of modes array
- * is_active: is peripheral active/enabled
- * enb_on_reset: if 1, mask bits to be cleared in reg otherwise to be set in reg
- */
-struct pmx_dev {
-	char *name;
-	struct pmx_dev_mode *modes;
-	u8 mode_count;
-	bool is_active;
-	bool enb_on_reset;
-};
-
-/*
- * struct pmx_driver: driver definition structure
- *
- * mode: mode to be set
- * devs: array of pointer to pmx devices
- * devs_count: ARRAY_SIZE of devs
- * base: base address of soc config registers
- * mode_reg: structure of mode config register
- * mux_reg: structure of device mux config register
- */
-struct pmx_driver {
-	struct pmx_mode *mode;
-	struct pmx_dev **devs;
-	u8 devs_count;
-	u32 *base;
-	struct pmx_reg mode_reg;
-	struct pmx_reg mux_reg;
-};
-
-/* pmx functions */
-int pmx_register(struct pmx_driver *driver);
-
-#endif /* __PLAT_PADMUX_H */
diff --git a/arch/arm/plat-spear/padmux.c b/arch/arm/plat-spear/padmux.c
deleted file mode 100644
index 555eec6dc1cb..000000000000
--- a/arch/arm/plat-spear/padmux.c
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/padmux.c
- *
- * SPEAr platform specific gpio pads muxing source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <plat/padmux.h>
-
-/*
- * struct pmx: pmx definition structure
- *
- * base: base address of configuration registers
- * mode_reg: mode configurations
- * mux_reg: muxing configurations
- * active_mode: pointer to current active mode
- */
-struct pmx {
-	u32 base;
-	struct pmx_reg mode_reg;
-	struct pmx_reg mux_reg;
-	struct pmx_mode *active_mode;
-};
-
-static struct pmx *pmx;
-
-/**
- * pmx_mode_set - Enables an multiplexing mode
- * @mode - pointer to pmx mode
- *
- * It will set mode of operation in hardware.
- * Returns -ve on Err otherwise 0
- */
-static int pmx_mode_set(struct pmx_mode *mode)
-{
-	u32 val;
-
-	if (!mode->name)
-		return -EFAULT;
-
-	pmx->active_mode = mode;
-
-	val = readl(pmx->base + pmx->mode_reg.offset);
-	val &= ~pmx->mode_reg.mask;
-	val |= mode->mask & pmx->mode_reg.mask;
-	writel(val, pmx->base + pmx->mode_reg.offset);
-
-	return 0;
-}
-
-/**
- * pmx_devs_enable - Enables list of devices
- * @devs - pointer to pmx device array
- * @count - number of devices to enable
- *
- * It will enable pads for all required peripherals once and only once.
- * If peripheral is not supported by current mode then request is rejected.
- * Conflicts between peripherals are not handled and peripherals will be
- * enabled in the order they are present in pmx_dev array.
- * In case of conflicts last peripheral enabled will be present.
- * Returns -ve on Err otherwise 0
- */
-static int pmx_devs_enable(struct pmx_dev **devs, u8 count)
-{
-	u32 val, i, mask;
-
-	if (!count)
-		return -EINVAL;
-
-	val = readl(pmx->base + pmx->mux_reg.offset);
-	for (i = 0; i < count; i++) {
-		u8 j = 0;
-
-		if (!devs[i]->name || !devs[i]->modes) {
-			printk(KERN_ERR "padmux: dev name or modes is null\n");
-			continue;
-		}
-		/* check if peripheral exists in active mode */
-		if (pmx->active_mode) {
-			bool found = false;
-			for (j = 0; j < devs[i]->mode_count; j++) {
-				if (devs[i]->modes[j].ids &
-						pmx->active_mode->id) {
-					found = true;
-					break;
-				}
-			}
-			if (found == false) {
-				printk(KERN_ERR "%s device not available in %s"\
-						"mode\n", devs[i]->name,
-						pmx->active_mode->name);
-				continue;
-			}
-		}
-
-		/* enable peripheral */
-		mask = devs[i]->modes[j].mask & pmx->mux_reg.mask;
-		if (devs[i]->enb_on_reset)
-			val &= ~mask;
-		else
-			val |= mask;
-
-		devs[i]->is_active = true;
-	}
-	writel(val, pmx->base + pmx->mux_reg.offset);
-	kfree(pmx);
-
-	/* this will ensure that multiplexing can't be changed now */
-	pmx = (struct pmx *)-1;
-
-	return 0;
-}
-
-/**
- * pmx_register - registers a platform requesting pad mux feature
- * @driver - pointer to driver structure containing driver specific parameters
- *
- * Also this must be called only once. This will allocate memory for pmx
- * structure, will call pmx_mode_set, will call pmx_devs_enable.
- * Returns -ve on Err otherwise 0
- */
-int pmx_register(struct pmx_driver *driver)
-{
-	int ret = 0;
-
-	if (pmx)
-		return -EPERM;
-	if (!driver->base || !driver->devs)
-		return -EFAULT;
-
-	pmx = kzalloc(sizeof(*pmx), GFP_KERNEL);
-	if (!pmx)
-		return -ENOMEM;
-
-	pmx->base = (u32)driver->base;
-	pmx->mode_reg.offset = driver->mode_reg.offset;
-	pmx->mode_reg.mask = driver->mode_reg.mask;
-	pmx->mux_reg.offset = driver->mux_reg.offset;
-	pmx->mux_reg.mask = driver->mux_reg.mask;
-
-	/* choose mode to enable */
-	if (driver->mode) {
-		ret = pmx_mode_set(driver->mode);
-		if (ret)
-			goto pmx_fail;
-	}
-	ret = pmx_devs_enable(driver->devs, driver->devs_count);
-	if (ret)
-		goto pmx_fail;
-
-	return 0;
-
-pmx_fail:
-	return ret;
-}