Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "Most of the commits are for defconfig changes, to enable newly added
  drivers or features that people have started using. For the changed
  lines lines, we have mostly cleanups, the affected platforms are OMAP,
  Versatile, EP93xx, Samsung, Broadcom, i.MX, and Actions.

  The largest single change is the introduction of the TI "sysc" bus
  driver, with the intention of cleaning up more legacy code.

  Two new SoC platforms get added this time:

   - Allwinner R40 is a modernized version of the A20 chip, now with a
     Quad-Core ARM Cortex-A7. According to the manufacturer, it is
     intended for "Smart Hardware"

   - Broadcom Hurricane 2 (Aka Strataconnect BCM5334X) is a family of
     chips meant for managed gigabit ethernet switches, based around a
     Cortex-A9 CPU.

  Finally, we gain SMP support for two platforms: Renesas R-Car E2 and
  Amlogic Meson8/8b, which were previously added but only supported
  uniprocessor operation"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (118 commits)
  ARM: multi_v7_defconfig: Select RPMSG_VIRTIO as module
  ARM: multi_v7_defconfig: enable CONFIG_GPIO_UNIPHIER
  arm64: defconfig: enable CONFIG_GPIO_UNIPHIER
  ARM: meson: enable MESON_IRQ_GPIO in Kconfig for meson8b
  ARM: meson: Add SMP bringup code for Meson8 and Meson8b
  ARM: smp_scu: allow the platform code to read the SCU CPU status
  ARM: smp_scu: add a helper for powering on a specific CPU
  dt-bindings: Amlogic: Add Meson8 and Meson8b SMP related documentation
  ARM: OMAP3: Delete an unnecessary variable initialisation in omap3xxx_hwmod_init()
  ARM: OMAP3: Use common error handling code in omap3xxx_hwmod_init()
  ARM: defconfig: select the right SX150X driver
  arm64: defconfig: Enable QCOM_IOMMU
  arm64: Add ThunderX drivers to defconfig
  arm64: defconfig: Enable Tegra PCI controller
  cpufreq: imx6q: Move speed grading check to cpufreq driver
  arm64: defconfig: re-enable Qualcomm DB410c USB
  ARM: configs: stm32: Add MDMA support in STM32 defconfig
  ARM: imx: Enable cpuidle for i.MX6DL starting at 1.1
  bus: ti-sysc: Fix unbalanced pm_runtime_enable by adding remove
  bus: ti-sysc: mark PM functions as __maybe_unused
  ...

1 files changed, 11 insertions, 22 deletions

diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index dc269d9143bc..5668e4eb03df 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -339,8 +339,7 @@ void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd)
 		pd->bus_num = 0;
 	}
 
-	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
-			       &s3c_device_i2c0);
+	npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c0);
 
 	if (!npd->cfg_gpio)
 		npd->cfg_gpio = s3c_i2c0_cfg_gpio;
@@ -368,8 +367,7 @@ void __init s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *pd)
 		pd->bus_num = 1;
 	}
 
-	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
-			       &s3c_device_i2c1);
+	npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c1);
 
 	if (!npd->cfg_gpio)
 		npd->cfg_gpio = s3c_i2c1_cfg_gpio;
@@ -398,8 +396,7 @@ void __init s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *pd)
 		pd->bus_num = 2;
 	}
 
-	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
-			       &s3c_device_i2c2);
+	npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c2);
 
 	if (!npd->cfg_gpio)
 		npd->cfg_gpio = s3c_i2c2_cfg_gpio;
@@ -428,8 +425,7 @@ void __init s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *pd)
 		pd->bus_num = 3;
 	}
 
-	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
-			       &s3c_device_i2c3);
+	npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c3);
 
 	if (!npd->cfg_gpio)
 		npd->cfg_gpio = s3c_i2c3_cfg_gpio;
@@ -458,8 +454,7 @@ void __init s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *pd)
 		pd->bus_num = 4;
 	}
 
-	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
-			       &s3c_device_i2c4);
+	npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c4);
 
 	if (!npd->cfg_gpio)
 		npd->cfg_gpio = s3c_i2c4_cfg_gpio;
@@ -488,8 +483,7 @@ void __init s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *pd)
 		pd->bus_num = 5;
 	}
 
-	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
-			       &s3c_device_i2c5);
+	npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c5);
 
 	if (!npd->cfg_gpio)
 		npd->cfg_gpio = s3c_i2c5_cfg_gpio;
@@ -518,8 +512,7 @@ void __init s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *pd)
 		pd->bus_num = 6;
 	}
 
-	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
-			       &s3c_device_i2c6);
+	npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c6);
 
 	if (!npd->cfg_gpio)
 		npd->cfg_gpio = s3c_i2c6_cfg_gpio;
@@ -548,8 +541,7 @@ void __init s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *pd)
 		pd->bus_num = 7;
 	}
 
-	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
-			       &s3c_device_i2c7);
+	npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c7);
 
 	if (!npd->cfg_gpio)
 		npd->cfg_gpio = s3c_i2c7_cfg_gpio;
@@ -615,8 +607,7 @@ void __init samsung_keypad_set_platdata(struct samsung_keypad_platdata *pd)
 {
 	struct samsung_keypad_platdata *npd;
 
-	npd = s3c_set_platdata(pd, sizeof(struct samsung_keypad_platdata),
-			&samsung_device_keypad);
+	npd = s3c_set_platdata(pd, sizeof(*npd), &samsung_device_keypad);
 
 	if (!npd->cfg_gpio)
 		npd->cfg_gpio = samsung_keypad_cfg_gpio;
@@ -721,8 +712,7 @@ void __init s3c_nand_set_platdata(struct s3c2410_platform_nand *nand)
 	 * time then there is little chance the system is going to run.
 	 */
 
-	npd = s3c_set_platdata(nand, sizeof(struct s3c2410_platform_nand),
-				&s3c_device_nand);
+	npd = s3c_set_platdata(nand, sizeof(*npd), &s3c_device_nand);
 	if (!npd)
 		return;
 
@@ -1022,8 +1012,7 @@ void __init dwc2_hsotg_set_platdata(struct dwc2_hsotg_plat *pd)
 {
 	struct dwc2_hsotg_plat *npd;
 
-	npd = s3c_set_platdata(pd, sizeof(struct dwc2_hsotg_plat),
-			&s3c_device_usb_hsotg);
+	npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_usb_hsotg);
 
 	if (!npd->phy_init)
 		npd->phy_init = s5p_usb_phy_init;