Merge commit 'v2.6.34-rc6' into core/locking

46 files changed, 0 insertions, 6123 deletions

diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig
deleted file mode 100644
index e6da87a5885c..000000000000
--- a/arch/arm/plat-s3c64xx/Kconfig
+++ /dev/null
@@ -1,71 +0,0 @@
-# Copyright 2008 Openmoko, Inc.
-# Copyright 2008 Simtec Electronics
-#	Ben Dooks <ben@simtec.co.uk>
-#
-# Licensed under GPLv2
-
-config PLAT_S3C64XX
-	bool
-	depends on ARCH_S3C64XX
-	default y
-	select CPU_V6
-	select PLAT_S3C
-	select ARM_VIC
-	select NO_IOPORT
-	select ARCH_REQUIRE_GPIOLIB
-	select S3C_GPIO_TRACK
-	select S3C_GPIO_PULL_UPDOWN
-	select S3C_GPIO_CFG_S3C24XX
-	select S3C_GPIO_CFG_S3C64XX
-	select S3C_DEV_NAND
-	select USB_ARCH_HAS_OHCI
-	help
-	  Base platform code for any Samsung S3C64XX device
-
-if PLAT_S3C64XX
-
-# Configuration options shared by all S3C64XX implementations
-
-config CPU_S3C6400_INIT
-	bool
-	help
-	  Common initialisation code for the S3C6400 that is shared
-	  by other CPUs in the series, such as the S3C6410.
-
-config CPU_S3C6400_CLOCK
-	bool
-	help
-	  Common clock support code for the S3C6400 that is shared
-	  by other CPUs in the series, such as the S3C6410.
-
-config S3C64XX_DMA
-	bool "S3C64XX DMA"
-	select S3C_DMA
-
-# platform specific device setup
-
-config S3C64XX_SETUP_I2C0
-	bool
-	default y
-	help
-	  Common setup code for i2c bus 0.
-
-	  Note, currently since i2c0 is always compiled, this setup helper
-	  is always compiled with it.
-
-config S3C64XX_SETUP_I2C1
-	bool
-	help
-	  Common setup code for i2c bus 1.
-
-config S3C64XX_SETUP_FB_24BPP
-	bool
-	help
-	  Common setup code for S3C64XX with an 24bpp RGB display helper.
-
-config S3C64XX_SETUP_SDHCI_GPIO
-	bool
-	help
-	  Common setup code for S3C64XX SDHCI GPIO configurations
-
-endif
diff --git a/arch/arm/plat-s3c64xx/Makefile b/arch/arm/plat-s3c64xx/Makefile
deleted file mode 100644
index b85b4359e935..000000000000
--- a/arch/arm/plat-s3c64xx/Makefile
+++ /dev/null
@@ -1,44 +0,0 @@
-# arch/arm/plat-s3c64xx/Makefile
-#
-# Copyright 2008 Openmoko, Inc.
-# Copyright 2008 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:= dummy.o
-obj-				:=
-
-# Core files
-
-obj-y				+= dev-uart.o
-obj-y				+= cpu.o
-obj-y				+= irq.o
-obj-y				+= irq-eint.o
-obj-y				+= clock.o
-obj-y				+= gpiolib.o
-
-# CPU support
-
-obj-$(CONFIG_CPU_S3C6400_INIT)	+= s3c6400-init.o
-obj-$(CONFIG_CPU_S3C6400_CLOCK)	+= s3c6400-clock.o
-obj-$(CONFIG_CPU_FREQ_S3C64XX)  += cpufreq.o
-
-# PM support
-
-obj-$(CONFIG_PM)		+= pm.o
-obj-$(CONFIG_PM)		+= sleep.o
-obj-$(CONFIG_PM)		+= irq-pm.o
-
-# DMA support
-
-obj-$(CONFIG_S3C64XX_DMA)	+= dma.o
-
-# Device setup
-
-obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
-obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
-obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
-obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
-obj-$(CONFIG_SND_S3C24XX_SOC) += dev-audio.o
diff --git a/arch/arm/plat-s3c64xx/clock.c b/arch/arm/plat-s3c64xx/clock.c
deleted file mode 100644
index 7a36e899360d..000000000000
--- a/arch/arm/plat-s3c64xx/clock.c
+++ /dev/null
@@ -1,300 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/clock.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C64XX Base clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/regs-sys.h>
-#include <plat/regs-clock.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-
-struct clk clk_h2 = {
-	.name		= "hclk2",
-	.id		= -1,
-	.rate		= 0,
-};
-
-struct clk clk_27m = {
-	.name		= "clk_27m",
-	.id		= -1,
-	.rate		= 27000000,
-};
-
-static int clk_48m_ctrl(struct clk *clk, int enable)
-{
-	unsigned long flags;
-	u32 val;
-
-	/* can't rely on clock lock, this register has other usages */
-	local_irq_save(flags);
-
-	val = __raw_readl(S3C64XX_OTHERS);
-	if (enable)
-		val |= S3C64XX_OTHERS_USBMASK;
-	else
-		val &= ~S3C64XX_OTHERS_USBMASK;
-
-	__raw_writel(val, S3C64XX_OTHERS);
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-struct clk clk_48m = {
-	.name		= "clk_48m",
-	.id		= -1,
-	.rate		= 48000000,
-	.enable		= clk_48m_ctrl,
-};
-
-static int inline s3c64xx_gate(void __iomem *reg,
-				struct clk *clk,
-				int enable)
-{
-	unsigned int ctrlbit = clk->ctrlbit;
-	u32 con;
-
-	con = __raw_readl(reg);
-
-	if (enable)
-		con |= ctrlbit;
-	else
-		con &= ~ctrlbit;
-
-	__raw_writel(con, reg);
-	return 0;
-}
-
-static int s3c64xx_pclk_ctrl(struct clk *clk, int enable)
-{
-	return s3c64xx_gate(S3C_PCLK_GATE, clk, enable);
-}
-
-static int s3c64xx_hclk_ctrl(struct clk *clk, int enable)
-{
-	return s3c64xx_gate(S3C_HCLK_GATE, clk, enable);
-}
-
-int s3c64xx_sclk_ctrl(struct clk *clk, int enable)
-{
-	return s3c64xx_gate(S3C_SCLK_GATE, clk, enable);
-}
-
-static struct clk init_clocks_disable[] = {
-	{
-		.name		= "nand",
-		.id		= -1,
-		.parent		= &clk_h,
-	}, {
-		.name		= "adc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_TSADC,
-	}, {
-		.name		= "i2c",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_IIC,
-	}, {
-		.name		= "iis",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_IIS0,
-	}, {
-		.name		= "iis",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_IIS1,
-	}, {
-		.name		= "spi",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_SPI0,
-	}, {
-		.name		= "spi",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_SPI1,
-	}, {
-		.name		= "48m",
-		.id		= 0,
-		.parent		= &clk_48m,
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_MMC0_48,
-	}, {
-		.name		= "48m",
-		.id		= 1,
-		.parent		= &clk_48m,
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_MMC1_48,
-	}, {
-		.name		= "48m",
-		.id		= 2,
-		.parent		= &clk_48m,
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_MMC2_48,
-	}, {
-		.name		= "dma0",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_DMA0,
-	}, {
-		.name		= "dma1",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_DMA1,
-	},
-};
-
-static struct clk init_clocks[] = {
-	{
-		.name		= "lcd",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_LCD,
-	}, {
-		.name		= "gpio",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_GPIO,
-	}, {
-		.name		= "usb-host",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_UHOST,
-	}, {
-		.name		= "hsmmc",
-		.id		= 0,
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_HSMMC0,
-	}, {
-		.name		= "hsmmc",
-		.id		= 1,
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_HSMMC1,
-	}, {
-		.name		= "hsmmc",
-		.id		= 2,
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_HSMMC2,
-	}, {
-		.name		= "timers",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_PWM,
-	}, {
-		.name		= "uart",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_UART0,
-	}, {
-		.name		= "uart",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_UART1,
-	}, {
-		.name		= "uart",
-		.id		= 2,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_UART2,
-	}, {
-		.name		= "uart",
-		.id		= 3,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_UART3,
-	}, {
-		.name		= "rtc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_RTC,
-	}, {
-		.name		= "watchdog",
-		.id		= -1,
-		.parent		= &clk_p,
-		.ctrlbit	= S3C_CLKCON_PCLK_WDT,
-	}, {
-		.name		= "ac97",
-		.id		= -1,
-		.parent		= &clk_p,
-		.ctrlbit	= S3C_CLKCON_PCLK_AC97,
-	}
-};
-
-static struct clk *clks[] __initdata = {
-	&clk_ext,
-	&clk_epll,
-	&clk_27m,
-	&clk_48m,
-	&clk_h2,
-};
-
-void __init s3c64xx_register_clocks(void)
-{
-	struct clk *clkp;
-	int ret;
-	int ptr;
-
-	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
-	clkp = init_clocks;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
-
-	clkp = init_clocks_disable;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-
-		(clkp->enable)(clkp, 0);
-	}
-
-	s3c_pwmclk_init();
-}
diff --git a/arch/arm/plat-s3c64xx/cpu.c b/arch/arm/plat-s3c64xx/cpu.c
deleted file mode 100644
index 49796d2db86d..000000000000
--- a/arch/arm/plat-s3c64xx/cpu.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/cpu.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C64XX CPU Support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/sysdev.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/regs-serial.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-
-#include <plat/s3c6400.h>
-#include <plat/s3c6410.h>
-
-/* table of supported CPUs */
-
-static const char name_s3c6400[] = "S3C6400";
-static const char name_s3c6410[] = "S3C6410";
-
-static struct cpu_table cpu_ids[] __initdata = {
-	{
-		.idcode		= 0x36400000,
-		.idmask		= 0xfffff000,
-		.map_io		= s3c6400_map_io,
-		.init_clocks	= s3c6400_init_clocks,
-		.init_uarts	= s3c6400_init_uarts,
-		.init		= s3c6400_init,
-		.name		= name_s3c6400,
-	}, {
-		.idcode		= 0x36410100,
-		.idmask		= 0xffffff00,
-		.map_io		= s3c6410_map_io,
-		.init_clocks	= s3c6410_init_clocks,
-		.init_uarts	= s3c6410_init_uarts,
-		.init		= s3c6410_init,
-		.name		= name_s3c6410,
-	},
-};
-
-/* minimal IO mapping */
-
-/* see notes on uart map in arch/arm/mach-s3c6400/include/mach/debug-macro.S */
-#define UART_OFFS (S3C_PA_UART & 0xfffff)
-
-static struct map_desc s3c_iodesc[] __initdata = {
-	{
-		.virtual	= (unsigned long)S3C_VA_SYS,
-		.pfn		= __phys_to_pfn(S3C64XX_PA_SYSCON),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)(S3C_VA_UART + UART_OFFS),
-		.pfn		= __phys_to_pfn(S3C_PA_UART),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_VIC0,
-		.pfn		= __phys_to_pfn(S3C64XX_PA_VIC0),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_VIC1,
-		.pfn		= __phys_to_pfn(S3C64XX_PA_VIC1),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_TIMER,
-		.pfn		= __phys_to_pfn(S3C_PA_TIMER),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C64XX_VA_GPIO,
-		.pfn		= __phys_to_pfn(S3C64XX_PA_GPIO),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C64XX_VA_MODEM,
-		.pfn		= __phys_to_pfn(S3C64XX_PA_MODEM),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_WATCHDOG,
-		.pfn		= __phys_to_pfn(S3C64XX_PA_WATCHDOG),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_USB_HSPHY,
-		.pfn		= __phys_to_pfn(S3C64XX_PA_USB_HSPHY),
-		.length		= SZ_1K,
-		.type		= MT_DEVICE,
-	},
-};
-
-
-struct sysdev_class s3c64xx_sysclass = {
-	.name	= "s3c64xx-core",
-};
-
-static struct sys_device s3c64xx_sysdev = {
-	.cls	= &s3c64xx_sysclass,
-};
-
-
-/* read cpu identification code */
-
-void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
-{
-	unsigned long idcode;
-
-	/* initialise the io descriptors we need for initialisation */
-	iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
-	iotable_init(mach_desc, size);
-
-	idcode = __raw_readl(S3C_VA_SYS + 0x118);
-	if (!idcode) {
-		/* S3C6400 has the ID register in a different place,
-		 * and needs a write before it can be read. */
-
-		__raw_writel(0x0, S3C_VA_SYS + 0xA1C);
-		idcode = __raw_readl(S3C_VA_SYS + 0xA1C);
-	}
-
-	s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
-}
-
-static __init int s3c64xx_sysdev_init(void)
-{
-	sysdev_class_register(&s3c64xx_sysclass);
-	return sysdev_register(&s3c64xx_sysdev);
-}
-
-core_initcall(s3c64xx_sysdev_init);
diff --git a/arch/arm/plat-s3c64xx/cpufreq.c b/arch/arm/plat-s3c64xx/cpufreq.c
deleted file mode 100644
index 74c0e8347de5..000000000000
--- a/arch/arm/plat-s3c64xx/cpufreq.c
+++ /dev/null
@@ -1,270 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/cpufreq.c
- *
- * Copyright 2009 Wolfson Microelectronics plc
- *
- * S3C64xx CPUfreq Support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/regulator/consumer.h>
-
-static struct clk *armclk;
-static struct regulator *vddarm;
-static unsigned long regulator_latency;
-
-#ifdef CONFIG_CPU_S3C6410
-struct s3c64xx_dvfs {
-	unsigned int vddarm_min;
-	unsigned int vddarm_max;
-};
-
-static struct s3c64xx_dvfs s3c64xx_dvfs_table[] = {
-	[0] = { 1000000, 1150000 },
-	[1] = { 1050000, 1150000 },
-	[2] = { 1100000, 1150000 },
-	[3] = { 1200000, 1350000 },
-};
-
-static struct cpufreq_frequency_table s3c64xx_freq_table[] = {
-	{ 0,  66000 },
-	{ 0, 133000 },
-	{ 1, 222000 },
-	{ 1, 266000 },
-	{ 2, 333000 },
-	{ 2, 400000 },
-	{ 2, 532000 },
-	{ 2, 533000 },
-	{ 3, 667000 },
-	{ 0, CPUFREQ_TABLE_END },
-};
-#endif
-
-static int s3c64xx_cpufreq_verify_speed(struct cpufreq_policy *policy)
-{
-	if (policy->cpu != 0)
-		return -EINVAL;
-
-	return cpufreq_frequency_table_verify(policy, s3c64xx_freq_table);
-}
-
-static unsigned int s3c64xx_cpufreq_get_speed(unsigned int cpu)
-{
-	if (cpu != 0)
-		return 0;
-
-	return clk_get_rate(armclk) / 1000;
-}
-
-static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy,
-				      unsigned int target_freq,
-				      unsigned int relation)
-{
-	int ret;
-	unsigned int i;
-	struct cpufreq_freqs freqs;
-	struct s3c64xx_dvfs *dvfs;
-
-	ret = cpufreq_frequency_table_target(policy, s3c64xx_freq_table,
-					     target_freq, relation, &i);
-	if (ret != 0)
-		return ret;
-
-	freqs.cpu = 0;
-	freqs.old = clk_get_rate(armclk) / 1000;
-	freqs.new = s3c64xx_freq_table[i].frequency;
-	freqs.flags = 0;
-	dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[i].index];
-
-	if (freqs.old == freqs.new)
-		return 0;
-
-	pr_debug("cpufreq: Transition %d-%dkHz\n", freqs.old, freqs.new);
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-#ifdef CONFIG_REGULATOR
-	if (vddarm && freqs.new > freqs.old) {
-		ret = regulator_set_voltage(vddarm,
-					    dvfs->vddarm_min,
-					    dvfs->vddarm_max);
-		if (ret != 0) {
-			pr_err("cpufreq: Failed to set VDDARM for %dkHz: %d\n",
-			       freqs.new, ret);
-			goto err;
-		}
-	}
-#endif
-
-	ret = clk_set_rate(armclk, freqs.new * 1000);
-	if (ret < 0) {
-		pr_err("cpufreq: Failed to set rate %dkHz: %d\n",
-		       freqs.new, ret);
-		goto err;
-	}
-
-#ifdef CONFIG_REGULATOR
-	if (vddarm && freqs.new < freqs.old) {
-		ret = regulator_set_voltage(vddarm,
-					    dvfs->vddarm_min,
-					    dvfs->vddarm_max);
-		if (ret != 0) {
-			pr_err("cpufreq: Failed to set VDDARM for %dkHz: %d\n",
-			       freqs.new, ret);
-			goto err_clk;
-		}
-	}
-#endif
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	pr_debug("cpufreq: Set actual frequency %lukHz\n",
-		 clk_get_rate(armclk) / 1000);
-
-	return 0;
-
-err_clk:
-	if (clk_set_rate(armclk, freqs.old * 1000) < 0)
-		pr_err("Failed to restore original clock rate\n");
-err:
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	return ret;
-}
-
-#ifdef CONFIG_REGULATOR
-static void __init s3c64xx_cpufreq_config_regulator(void)
-{
-	int count, v, i, found;
-	struct cpufreq_frequency_table *freq;
-	struct s3c64xx_dvfs *dvfs;
-
-	count = regulator_count_voltages(vddarm);
-	if (count < 0) {
-		pr_err("cpufreq: Unable to check supported voltages\n");
-	}
-
-	freq = s3c64xx_freq_table;
-	while (count > 0 && freq->frequency != CPUFREQ_TABLE_END) {
-		if (freq->frequency == CPUFREQ_ENTRY_INVALID)
-			continue;
-
-		dvfs = &s3c64xx_dvfs_table[freq->index];
-		found = 0;
-
-		for (i = 0; i < count; i++) {
-			v = regulator_list_voltage(vddarm, i);
-			if (v >= dvfs->vddarm_min && v <= dvfs->vddarm_max)
-				found = 1;
-		}
-
-		if (!found) {
-			pr_debug("cpufreq: %dkHz unsupported by regulator\n",
-				 freq->frequency);
-			freq->frequency = CPUFREQ_ENTRY_INVALID;
-		}
-
-		freq++;
-	}
-
-	/* Guess based on having to do an I2C/SPI write; in future we
-	 * will be able to query the regulator performance here. */
-	regulator_latency = 1 * 1000 * 1000;
-}
-#endif
-
-static int __init s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
-{
-	int ret;
-	struct cpufreq_frequency_table *freq;
-
-	if (policy->cpu != 0)
-		return -EINVAL;
-
-	if (s3c64xx_freq_table == NULL) {
-		pr_err("cpufreq: No frequency information for this CPU\n");
-		return -ENODEV;
-	}
-
-	armclk = clk_get(NULL, "armclk");
-	if (IS_ERR(armclk)) {
-		pr_err("cpufreq: Unable to obtain ARMCLK: %ld\n",
-		       PTR_ERR(armclk));
-		return PTR_ERR(armclk);
-	}
-
-#ifdef CONFIG_REGULATOR
-	vddarm = regulator_get(NULL, "vddarm");
-	if (IS_ERR(vddarm)) {
-		ret = PTR_ERR(vddarm);
-		pr_err("cpufreq: Failed to obtain VDDARM: %d\n", ret);
-		pr_err("cpufreq: Only frequency scaling available\n");
-		vddarm = NULL;
-	} else {
-		s3c64xx_cpufreq_config_regulator();
-	}
-#endif
-
-	freq = s3c64xx_freq_table;
-	while (freq->frequency != CPUFREQ_TABLE_END) {
-		unsigned long r;
-
-		/* Check for frequencies we can generate */
-		r = clk_round_rate(armclk, freq->frequency * 1000);
-		r /= 1000;
-		if (r != freq->frequency) {
-			pr_debug("cpufreq: %dkHz unsupported by clock\n",
-				 freq->frequency);
-			freq->frequency = CPUFREQ_ENTRY_INVALID;
-		}
-
-		/* If we have no regulator then assume startup
-		 * frequency is the maximum we can support. */
-		if (!vddarm && freq->frequency > s3c64xx_cpufreq_get_speed(0))
-			freq->frequency = CPUFREQ_ENTRY_INVALID;
-
-		freq++;
-	}
-
-	policy->cur = clk_get_rate(armclk) / 1000;
-
-	/* Datasheet says PLL stabalisation time (if we were to use
-	 * the PLLs, which we don't currently) is ~300us worst case,
-	 * but add some fudge.
-	 */
-	policy->cpuinfo.transition_latency = (500 * 1000) + regulator_latency;
-
-	ret = cpufreq_frequency_table_cpuinfo(policy, s3c64xx_freq_table);
-	if (ret != 0) {
-		pr_err("cpufreq: Failed to configure frequency table: %d\n",
-		       ret);
-		regulator_put(vddarm);
-		clk_put(armclk);
-	}
-
-	return ret;
-}
-
-static struct cpufreq_driver s3c64xx_cpufreq_driver = {
-	.owner		= THIS_MODULE,
-	.flags          = 0,
-	.verify		= s3c64xx_cpufreq_verify_speed,
-	.target		= s3c64xx_cpufreq_set_target,
-	.get		= s3c64xx_cpufreq_get_speed,
-	.init		= s3c64xx_cpufreq_driver_init,
-	.name		= "s3c",
-};
-
-static int __init s3c64xx_cpufreq_init(void)
-{
-	return cpufreq_register_driver(&s3c64xx_cpufreq_driver);
-}
-module_init(s3c64xx_cpufreq_init);
diff --git a/arch/arm/plat-s3c64xx/dev-audio.c b/arch/arm/plat-s3c64xx/dev-audio.c
deleted file mode 100644
index a21a88fbb7e3..000000000000
--- a/arch/arm/plat-s3c64xx/dev-audio.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/* linux/arch/arm/plat-s3c/dev-audio.c
- *
- * Copyright 2009 Wolfson Microelectronics
- *      Mark Brown <broonie@opensource.wolfsonmicro.com>
- *
-
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-#include <mach/dma.h>
-#include <mach/gpio.h>
-
-#include <plat/devs.h>
-#include <plat/audio.h>
-#include <plat/gpio-bank-d.h>
-#include <plat/gpio-bank-e.h>
-#include <plat/gpio-cfg.h>
-
-static struct resource s3c64xx_iis0_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_IIS0,
-		.end   = S3C64XX_PA_IIS0 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device s3c64xx_device_iis0 = {
-	.name		  = "s3c64xx-iis",
-	.id		  = 0,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_iis0_resource),
-	.resource	  = s3c64xx_iis0_resource,
-};
-EXPORT_SYMBOL(s3c64xx_device_iis0);
-
-static struct resource s3c64xx_iis1_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_IIS1,
-		.end   = S3C64XX_PA_IIS1 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device s3c64xx_device_iis1 = {
-	.name		  = "s3c64xx-iis",
-	.id		  = 1,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_iis1_resource),
-	.resource	  = s3c64xx_iis1_resource,
-};
-EXPORT_SYMBOL(s3c64xx_device_iis1);
-
-static struct resource s3c64xx_iisv4_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_IISV4,
-		.end   = S3C64XX_PA_IISV4 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device s3c64xx_device_iisv4 = {
-	.name		  = "s3c64xx-iis-v4",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_iisv4_resource),
-	.resource	  = s3c64xx_iisv4_resource,
-};
-EXPORT_SYMBOL(s3c64xx_device_iisv4);
-
-
-/* PCM Controller platform_devices */
-
-static int s3c64xx_pcm_cfg_gpio(struct platform_device *pdev)
-{
-	switch (pdev->id) {
-	case 0:
-		s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_PCM0_SCLK);
-		s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_PCM0_EXTCLK);
-		s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_PCM0_FSYNC);
-		s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_PCM0_SIN);
-		s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_PCM0_SOUT);
-		break;
-	case 1:
-		s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_PCM1_SCLK);
-		s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_PCM1_EXTCLK);
-		s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_PCM1_FSYNC);
-		s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_PCM1_SIN);
-		s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_PCM1_SOUT);
-		break;
-	default:
-		printk(KERN_DEBUG "Invalid PCM Controller number!");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static struct resource s3c64xx_pcm0_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_PCM0,
-		.end   = S3C64XX_PA_PCM0 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_PCM0_TX,
-		.end   = DMACH_PCM0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_PCM0_RX,
-		.end   = DMACH_PCM0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct s3c_audio_pdata s3c_pcm0_pdata = {
-	.cfg_gpio = s3c64xx_pcm_cfg_gpio,
-};
-
-struct platform_device s3c64xx_device_pcm0 = {
-	.name		  = "samsung-pcm",
-	.id		  = 0,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_pcm0_resource),
-	.resource	  = s3c64xx_pcm0_resource,
-	.dev = {
-		.platform_data = &s3c_pcm0_pdata,
-	},
-};
-EXPORT_SYMBOL(s3c64xx_device_pcm0);
-
-static struct resource s3c64xx_pcm1_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_PCM1,
-		.end   = S3C64XX_PA_PCM1 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_PCM1_TX,
-		.end   = DMACH_PCM1_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_PCM1_RX,
-		.end   = DMACH_PCM1_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct s3c_audio_pdata s3c_pcm1_pdata = {
-	.cfg_gpio = s3c64xx_pcm_cfg_gpio,
-};
-
-struct platform_device s3c64xx_device_pcm1 = {
-	.name		  = "samsung-pcm",
-	.id		  = 1,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_pcm1_resource),
-	.resource	  = s3c64xx_pcm1_resource,
-	.dev = {
-		.platform_data = &s3c_pcm1_pdata,
-	},
-};
-EXPORT_SYMBOL(s3c64xx_device_pcm1);
diff --git a/arch/arm/plat-s3c64xx/dev-uart.c b/arch/arm/plat-s3c64xx/dev-uart.c
deleted file mode 100644
index 62c11a6fc7ba..000000000000
--- a/arch/arm/plat-s3c64xx/dev-uart.c
+++ /dev/null
@@ -1,176 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/dev-uart.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * Base S3C64XX UART resource and device definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-
-/* Serial port registrations */
-
-/* 64xx uarts are closer together */
-
-static struct resource s3c64xx_uart0_resource[] = {
-	[0] = {
-		.start	= S3C_PA_UART0,
-		.end	= S3C_PA_UART0 + 0x100,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_S3CUART_RX0,
-		.end	= IRQ_S3CUART_RX0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= IRQ_S3CUART_TX0,
-		.end	= IRQ_S3CUART_TX0,
-		.flags	= IORESOURCE_IRQ,
-
-	},
-	[3] = {
-		.start	= IRQ_S3CUART_ERR0,
-		.end	= IRQ_S3CUART_ERR0,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct resource s3c64xx_uart1_resource[] = {
-	[0] = {
-		.start = S3C_PA_UART1,
-		.end   = S3C_PA_UART1 + 0x100,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_S3CUART_RX1,
-		.end	= IRQ_S3CUART_RX1,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= IRQ_S3CUART_TX1,
-		.end	= IRQ_S3CUART_TX1,
-		.flags	= IORESOURCE_IRQ,
-
-	},
-	[3] = {
-		.start	= IRQ_S3CUART_ERR1,
-		.end	= IRQ_S3CUART_ERR1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource s3c6xx_uart2_resource[] = {
-	[0] = {
-		.start = S3C_PA_UART2,
-		.end   = S3C_PA_UART2 + 0x100,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_S3CUART_RX2,
-		.end	= IRQ_S3CUART_RX2,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= IRQ_S3CUART_TX2,
-		.end	= IRQ_S3CUART_TX2,
-		.flags	= IORESOURCE_IRQ,
-
-	},
-	[3] = {
-		.start	= IRQ_S3CUART_ERR2,
-		.end	= IRQ_S3CUART_ERR2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource s3c64xx_uart3_resource[] = {
-	[0] = {
-		.start = S3C_PA_UART3,
-		.end   = S3C_PA_UART3 + 0x100,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_S3CUART_RX3,
-		.end	= IRQ_S3CUART_RX3,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= IRQ_S3CUART_TX3,
-		.end	= IRQ_S3CUART_TX3,
-		.flags	= IORESOURCE_IRQ,
-
-	},
-	[3] = {
-		.start	= IRQ_S3CUART_ERR3,
-		.end	= IRQ_S3CUART_ERR3,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-
-struct s3c24xx_uart_resources s3c64xx_uart_resources[] __initdata = {
-	[0] = {
-		.resources	= s3c64xx_uart0_resource,
-		.nr_resources	= ARRAY_SIZE(s3c64xx_uart0_resource),
-	},
-	[1] = {
-		.resources	= s3c64xx_uart1_resource,
-		.nr_resources	= ARRAY_SIZE(s3c64xx_uart1_resource),
-	},
-	[2] = {
-		.resources	= s3c6xx_uart2_resource,
-		.nr_resources	= ARRAY_SIZE(s3c6xx_uart2_resource),
-	},
-	[3] = {
-		.resources	= s3c64xx_uart3_resource,
-		.nr_resources	= ARRAY_SIZE(s3c64xx_uart3_resource),
-	},
-};
-
-/* uart devices */
-
-static struct platform_device s3c24xx_uart_device0 = {
-	.id		= 0,
-};
-
-static struct platform_device s3c24xx_uart_device1 = {
-	.id		= 1,
-};
-
-static struct platform_device s3c24xx_uart_device2 = {
-	.id		= 2,
-};
-
-static struct platform_device s3c24xx_uart_device3 = {
-	.id		= 3,
-};
-
-struct platform_device *s3c24xx_uart_src[4] = {
-	&s3c24xx_uart_device0,
-	&s3c24xx_uart_device1,
-	&s3c24xx_uart_device2,
-	&s3c24xx_uart_device3,
-};
-
-struct platform_device *s3c24xx_uart_devs[4] = {
-};
-
diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/plat-s3c64xx/dma.c
deleted file mode 100644
index d554b936fcfb..000000000000
--- a/arch/arm/plat-s3c64xx/dma.c
+++ /dev/null
@@ -1,750 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/dma.c
- *
- * Copyright 2009 Openmoko, Inc.
- * Copyright 2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C64XX DMA core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/dmapool.h>
-#include <linux/sysdev.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <mach/dma.h>
-#include <mach/map.h>
-#include <mach/irqs.h>
-
-#include <plat/dma-plat.h>
-#include <plat/regs-sys.h>
-
-#include <asm/hardware/pl080.h>
-
-/* dma channel state information */
-
-struct s3c64xx_dmac {
-	struct sys_device	 sysdev;
-	struct clk		*clk;
-	void __iomem		*regs;
-	struct s3c2410_dma_chan *channels;
-	enum dma_ch		 chanbase;
-};
-
-/* pool to provide LLI buffers */
-static struct dma_pool *dma_pool;
-
-/* Debug configuration and code */
-
-static unsigned char debug_show_buffs = 0;
-
-static void dbg_showchan(struct s3c2410_dma_chan *chan)
-{
-	pr_debug("DMA%d: %08x->%08x L %08x C %08x,%08x S %08x\n",
-		 chan->number,
-		 readl(chan->regs + PL080_CH_SRC_ADDR),
-		 readl(chan->regs + PL080_CH_DST_ADDR),
-		 readl(chan->regs + PL080_CH_LLI),
-		 readl(chan->regs + PL080_CH_CONTROL),
-		 readl(chan->regs + PL080S_CH_CONTROL2),
-		 readl(chan->regs + PL080S_CH_CONFIG));
-}
-
-static void show_lli(struct pl080s_lli *lli)
-{
-	pr_debug("LLI[%p] %08x->%08x, NL %08x C %08x,%08x\n",
-		 lli, lli->src_addr, lli->dst_addr, lli->next_lli,
-		 lli->control0, lli->control1);
-}
-
-static void dbg_showbuffs(struct s3c2410_dma_chan *chan)
-{
-	struct s3c64xx_dma_buff *ptr;
-	struct s3c64xx_dma_buff *end;
-
-	pr_debug("DMA%d: buffs next %p, curr %p, end %p\n",
-		 chan->number, chan->next, chan->curr, chan->end);
-
-	ptr = chan->next;
-	end = chan->end;
-
-	if (debug_show_buffs) {
-		for (; ptr != NULL; ptr = ptr->next) {
-			pr_debug("DMA%d: %08x ",
-				 chan->number, ptr->lli_dma);
-			show_lli(ptr->lli);
-		}
-	}
-}
-
-/* End of Debug */
-
-static struct s3c2410_dma_chan *s3c64xx_dma_map_channel(unsigned int channel)
-{
-	struct s3c2410_dma_chan *chan;
-	unsigned int start, offs;
-
-	start = 0;
-
-	if (channel >= DMACH_PCM1_TX)
-		start = 8;
-
-	for (offs = 0; offs < 8; offs++) {
-		chan = &s3c2410_chans[start + offs];
-		if (!chan->in_use)
-			goto found;
-	}
-
-	return NULL;
-
-found:
-	s3c_dma_chan_map[channel] = chan;
-	return chan;
-}
-
-int s3c2410_dma_config(unsigned int channel, int xferunit)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	switch (xferunit) {
-	case 1:
-		chan->hw_width = 0;
-		break;
-	case 2:
-		chan->hw_width = 1;
-		break;
-	case 4:
-		chan->hw_width = 2;
-		break;
-	default:
-		printk(KERN_ERR "%s: illegal width %d\n", __func__, xferunit);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_config);
-
-static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan,
-				 struct pl080s_lli *lli,
-				 dma_addr_t data, int size)
-{
-	dma_addr_t src, dst;
-	u32 control0, control1;
-
-	switch (chan->source) {
-	case S3C2410_DMASRC_HW:
-		src = chan->dev_addr;
-		dst = data;
-		control0 = PL080_CONTROL_SRC_AHB2;
-		control0 |= PL080_CONTROL_DST_INCR;
-		break;
-
-	case S3C2410_DMASRC_MEM:
-		src = data;
-		dst = chan->dev_addr;
-		control0 = PL080_CONTROL_DST_AHB2;
-		control0 |= PL080_CONTROL_SRC_INCR;
-		break;
-	default:
-		BUG();
-	}
-
-	/* note, we do not currently setup any of the burst controls */
-
-	control1 = size >> chan->hw_width;	/* size in no of xfers */
-	control0 |= PL080_CONTROL_PROT_SYS;	/* always in priv. mode */
-	control0 |= PL080_CONTROL_TC_IRQ_EN;	/* always fire IRQ */
-	control0 |= (u32)chan->hw_width << PL080_CONTROL_DWIDTH_SHIFT;
-	control0 |= (u32)chan->hw_width << PL080_CONTROL_SWIDTH_SHIFT;
-
-	lli->src_addr = src;
-	lli->dst_addr = dst;
-	lli->next_lli = 0;
-	lli->control0 = control0;
-	lli->control1 = control1;
-}
-
-static void s3c64xx_lli_to_regs(struct s3c2410_dma_chan *chan,
-				struct pl080s_lli *lli)
-{
-	void __iomem *regs = chan->regs;
-
-	pr_debug("%s: LLI %p => regs\n", __func__, lli);
-	show_lli(lli);
-
-	writel(lli->src_addr, regs + PL080_CH_SRC_ADDR);
-	writel(lli->dst_addr, regs + PL080_CH_DST_ADDR);
-	writel(lli->next_lli, regs + PL080_CH_LLI);
-	writel(lli->control0, regs + PL080_CH_CONTROL);
-	writel(lli->control1, regs + PL080S_CH_CONTROL2);
-}
-
-static int s3c64xx_dma_start(struct s3c2410_dma_chan *chan)
-{
-	struct s3c64xx_dmac *dmac = chan->dmac;
-	u32 config;
-	u32 bit = chan->bit;
-
-	dbg_showchan(chan);
-
-	pr_debug("%s: clearing interrupts\n", __func__);
-
-	/* clear interrupts */
-	writel(bit, dmac->regs + PL080_TC_CLEAR);
-	writel(bit, dmac->regs + PL080_ERR_CLEAR);
-
-	pr_debug("%s: starting channel\n", __func__);
-
-	config = readl(chan->regs + PL080S_CH_CONFIG);
-	config |= PL080_CONFIG_ENABLE;
-
-	pr_debug("%s: writing config %08x\n", __func__, config);
-	writel(config, chan->regs + PL080S_CH_CONFIG);
-
-	return 0;
-}
-
-static int s3c64xx_dma_stop(struct s3c2410_dma_chan *chan)
-{
-	u32 config;
-	int timeout;
-
-	pr_debug("%s: stopping channel\n", __func__);
-
-	dbg_showchan(chan);
-
-	config = readl(chan->regs + PL080S_CH_CONFIG);
-	config |= PL080_CONFIG_HALT;
-	writel(config, chan->regs + PL080S_CH_CONFIG);
-
-	timeout = 1000;
-	do {
-		config = readl(chan->regs + PL080S_CH_CONFIG);
-		pr_debug("%s: %d - config %08x\n", __func__, timeout, config);
-		if (config & PL080_CONFIG_ACTIVE)
-			udelay(10);
-		else
-			break;
-		} while (--timeout > 0);
-
-	if (config & PL080_CONFIG_ACTIVE) {
-		printk(KERN_ERR "%s: channel still active\n", __func__);
-		return -EFAULT;
-	}
-
-	config = readl(chan->regs + PL080S_CH_CONFIG);
-	config &= ~PL080_CONFIG_ENABLE;
-	writel(config, chan->regs + PL080S_CH_CONFIG);
-
-	return 0;
-}
-
-static inline void s3c64xx_dma_bufffdone(struct s3c2410_dma_chan *chan,
-					 struct s3c64xx_dma_buff *buf,
-					 enum s3c2410_dma_buffresult result)
-{
-	if (chan->callback_fn != NULL)
-		(chan->callback_fn)(chan, buf->pw, 0, result);
-}
-
-static void s3c64xx_dma_freebuff(struct s3c64xx_dma_buff *buff)
-{
-	dma_pool_free(dma_pool, buff->lli, buff->lli_dma);
-	kfree(buff);
-}
-
-static int s3c64xx_dma_flush(struct s3c2410_dma_chan *chan)
-{
-	struct s3c64xx_dma_buff *buff, *next;
-	u32 config;
-
-	dbg_showchan(chan);
-
-	pr_debug("%s: flushing channel\n", __func__);
-
-	config = readl(chan->regs + PL080S_CH_CONFIG);
-	config &= ~PL080_CONFIG_ENABLE;
-	writel(config, chan->regs + PL080S_CH_CONFIG);
-
-	/* dump all the buffers associated with this channel */
-
-	for (buff = chan->curr; buff != NULL; buff = next) {
-		next = buff->next;
-		pr_debug("%s: buff %p (next %p)\n", __func__, buff, buff->next);
-
-		s3c64xx_dma_bufffdone(chan, buff, S3C2410_RES_ABORT);
-		s3c64xx_dma_freebuff(buff);
-	}
-
-	chan->curr = chan->next = chan->end = NULL;
-
-	return 0;
-}
-
-int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-
-	WARN_ON(!chan);
-	if (!chan)
-		return -EINVAL;
-
-	switch (op) {
-	case S3C2410_DMAOP_START:
-		return s3c64xx_dma_start(chan);
-
-	case S3C2410_DMAOP_STOP:
-		return s3c64xx_dma_stop(chan);
-
-	case S3C2410_DMAOP_FLUSH:
-		return s3c64xx_dma_flush(chan);
-
-	/* belive PAUSE/RESUME are no-ops */
-	case S3C2410_DMAOP_PAUSE:
-	case S3C2410_DMAOP_RESUME:
-	case S3C2410_DMAOP_STARTED:
-	case S3C2410_DMAOP_TIMEOUT:
-		return 0;
-	}
-
-	return -ENOENT;
-}
-EXPORT_SYMBOL(s3c2410_dma_ctrl);
-
-/* s3c2410_dma_enque
- *
- */
-
-int s3c2410_dma_enqueue(unsigned int channel, void *id,
-			dma_addr_t data, int size)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-	struct s3c64xx_dma_buff *next;
-	struct s3c64xx_dma_buff *buff;
-	struct pl080s_lli *lli;
-	unsigned long flags;
-	int ret;
-
-	WARN_ON(!chan);
-	if (!chan)
-		return -EINVAL;
-
-	buff = kzalloc(sizeof(struct s3c64xx_dma_buff), GFP_ATOMIC);
-	if (!buff) {
-		printk(KERN_ERR "%s: no memory for buffer\n", __func__);
-		return -ENOMEM;
-	}
-
-	lli = dma_pool_alloc(dma_pool, GFP_ATOMIC, &buff->lli_dma);
-	if (!lli) {
-		printk(KERN_ERR "%s: no memory for lli\n", __func__);
-		ret = -ENOMEM;
-		goto err_buff;
-	}
-
-	pr_debug("%s: buff %p, dp %08x lli (%p, %08x) %d\n",
-		 __func__, buff, data, lli, (u32)buff->lli_dma, size);
-
-	buff->lli = lli;
-	buff->pw = id;
-
-	s3c64xx_dma_fill_lli(chan, lli, data, size);
-
-	local_irq_save(flags);
-
-	if ((next = chan->next) != NULL) {
-		struct s3c64xx_dma_buff *end = chan->end;
-		struct pl080s_lli *endlli = end->lli;
-
-		pr_debug("enquing onto channel\n");
-
-		end->next = buff;
-		endlli->next_lli = buff->lli_dma;
-
-		if (chan->flags & S3C2410_DMAF_CIRCULAR) {
-			struct s3c64xx_dma_buff *curr = chan->curr;
-			lli->next_lli = curr->lli_dma;
-		}
-
-		if (next == chan->curr) {
-			writel(buff->lli_dma, chan->regs + PL080_CH_LLI);
-			chan->next = buff;
-		}
-
-		show_lli(endlli);
-		chan->end = buff;
-	} else {
-		pr_debug("enquing onto empty channel\n");
-
-		chan->curr = buff;
-		chan->next = buff;
-		chan->end = buff;
-
-		s3c64xx_lli_to_regs(chan, lli);
-	}
-
-	local_irq_restore(flags);
-
-	show_lli(lli);
-
-	dbg_showchan(chan);
-	dbg_showbuffs(chan);
-	return 0;
-
-err_buff:
-	kfree(buff);
-	return ret;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_enqueue);
-
-
-int s3c2410_dma_devconfig(int channel,
-			  enum s3c2410_dmasrc source,
-			  unsigned long devaddr)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-	u32 peripheral;
-	u32 config = 0;
-
-	pr_debug("%s: channel %d, source %d, dev %08lx, chan %p\n",
-		 __func__, channel, source, devaddr, chan);
-
-	WARN_ON(!chan);
-	if (!chan)
-		return -EINVAL;
-
-	peripheral = (chan->peripheral & 0xf);
-	chan->source = source;
-	chan->dev_addr = devaddr;
-
-	pr_debug("%s: peripheral %d\n", __func__, peripheral);
-
-	switch (source) {
-	case S3C2410_DMASRC_HW:
-		config = 2 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
-		config |= peripheral << PL080_CONFIG_SRC_SEL_SHIFT;
-		break;
-	case S3C2410_DMASRC_MEM:
-		config = 1 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
-		config |= peripheral << PL080_CONFIG_DST_SEL_SHIFT;
-		break;
-	default:
-		printk(KERN_ERR "%s: bad source\n", __func__);
-		return -EINVAL;
-	}
-
-	/* allow TC and ERR interrupts */
-	config |= PL080_CONFIG_TC_IRQ_MASK;
-	config |= PL080_CONFIG_ERR_IRQ_MASK;
-
-	pr_debug("%s: config %08x\n", __func__, config);
-
-	writel(config, chan->regs + PL080S_CH_CONFIG);
-
-	return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_devconfig);
-
-
-int s3c2410_dma_getposition(unsigned int channel,
-			    dma_addr_t *src, dma_addr_t *dst)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-
-	WARN_ON(!chan);
-	if (!chan)
-		return -EINVAL;
-
-	if (src != NULL)
-		*src = readl(chan->regs + PL080_CH_SRC_ADDR);
-
-	if (dst != NULL)
-		*dst = readl(chan->regs + PL080_CH_DST_ADDR);
-
-	return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_getposition);
-
-/* s3c2410_request_dma
- *
- * get control of an dma channel
-*/
-
-int s3c2410_dma_request(unsigned int channel,
-			struct s3c2410_dma_client *client,
-			void *dev)
-{
-	struct s3c2410_dma_chan *chan;
-	unsigned long flags;
-
-	pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n",
-		 channel, client->name, dev);
-
-	local_irq_save(flags);
-
-	chan = s3c64xx_dma_map_channel(channel);
-	if (chan == NULL) {
-		local_irq_restore(flags);
-		return -EBUSY;
-	}
-
-	dbg_showchan(chan);
-
-	chan->client = client;
-	chan->in_use = 1;
-	chan->peripheral = channel;
-
-	local_irq_restore(flags);
-
-	/* need to setup */
-
-	pr_debug("%s: channel initialised, %p\n", __func__, chan);
-
-	return chan->number | DMACH_LOW_LEVEL;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_request);
-
-/* s3c2410_dma_free
- *
- * release the given channel back to the system, will stop and flush
- * any outstanding transfers, and ensure the channel is ready for the
- * next claimant.
- *
- * Note, although a warning is currently printed if the freeing client
- * info is not the same as the registrant's client info, the free is still
- * allowed to go through.
-*/
-
-int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-	unsigned long flags;
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	local_irq_save(flags);
-
-	if (chan->client != client) {
-		printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n",
-		       channel, chan->client, client);
-	}
-
-	/* sort out stopping and freeing the channel */
-
-
-	chan->client = NULL;
-	chan->in_use = 0;
-
-	if (!(channel & DMACH_LOW_LEVEL))
-		s3c_dma_chan_map[channel] = NULL;
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_free);
-
-static irqreturn_t s3c64xx_dma_irq(int irq, void *pw)
-{
-	struct s3c64xx_dmac *dmac = pw;
-	struct s3c2410_dma_chan *chan;
-	enum s3c2410_dma_buffresult res;
-	u32 tcstat, errstat;
-	u32 bit;
-	int offs;
-
-	tcstat = readl(dmac->regs + PL080_TC_STATUS);
-	errstat = readl(dmac->regs + PL080_ERR_STATUS);
-
-	for (offs = 0, bit = 1; offs < 8; offs++, bit <<= 1) {
-		struct s3c64xx_dma_buff *buff;
-
-		if (!(errstat & bit) && !(tcstat & bit))
-			continue;
-
-		chan = dmac->channels + offs;
-		res = S3C2410_RES_ERR;
-
-		if (tcstat & bit) {
-			writel(bit, dmac->regs + PL080_TC_CLEAR);
-			res = S3C2410_RES_OK;
-		}
-
-		if (errstat & bit)
-			writel(bit, dmac->regs + PL080_ERR_CLEAR);
-
-		/* 'next' points to the buffer that is next to the
-		 * currently active buffer.
-		 * For CIRCULAR queues, 'next' will be same as 'curr'
-		 * when 'end' is the active buffer.
-		 */
-		buff = chan->curr;
-		while (buff && buff != chan->next
-				&& buff->next != chan->next)
-			buff = buff->next;
-
-		if (!buff)
-			BUG();
-
-		if (buff == chan->next)
-			buff = chan->end;
-
-		s3c64xx_dma_bufffdone(chan, buff, res);
-
-		/* Free the node and update curr, if non-circular queue */
-		if (!(chan->flags & S3C2410_DMAF_CIRCULAR)) {
-			chan->curr = buff->next;
-			s3c64xx_dma_freebuff(buff);
-		}
-
-		/* Update 'next' */
-		buff = chan->next;
-		if (chan->next == chan->end) {
-			chan->next = chan->curr;
-			if (!(chan->flags & S3C2410_DMAF_CIRCULAR))
-				chan->end = NULL;
-		} else {
-			chan->next = buff->next;
-		}
-	}
-
-	return IRQ_HANDLED;
-}
-
-static struct sysdev_class dma_sysclass = {
-	.name		= "s3c64xx-dma",
-};
-
-static int s3c64xx_dma_init1(int chno, enum dma_ch chbase,
-			     int irq, unsigned int base)
-{
-	struct s3c2410_dma_chan *chptr = &s3c2410_chans[chno];
-	struct s3c64xx_dmac *dmac;
-	char clkname[16];
-	void __iomem *regs;
-	void __iomem *regptr;
-	int err, ch;
-
-	dmac = kzalloc(sizeof(struct s3c64xx_dmac), GFP_KERNEL);
-	if (!dmac) {
-		printk(KERN_ERR "%s: failed to alloc mem\n", __func__);
-		return -ENOMEM;
-	}
-
-	dmac->sysdev.id = chno / 8;
-	dmac->sysdev.cls = &dma_sysclass;
-
-	err = sysdev_register(&dmac->sysdev);
-	if (err) {
-		printk(KERN_ERR "%s: failed to register sysdevice\n", __func__);
-		goto err_alloc;
-	}
-
-	regs = ioremap(base, 0x200);
-	if (!regs) {
-		printk(KERN_ERR "%s: failed to ioremap()\n", __func__);
-		err = -ENXIO;
-		goto err_dev;
-	}
-
-	snprintf(clkname, sizeof(clkname), "dma%d", dmac->sysdev.id);
-
-	dmac->clk = clk_get(NULL, clkname);
-	if (IS_ERR(dmac->clk)) {
-		printk(KERN_ERR "%s: failed to get clock %s\n", __func__, clkname);
-		err = PTR_ERR(dmac->clk);
-		goto err_map;
-	}
-
-	clk_enable(dmac->clk);
-
-	dmac->regs = regs;
-	dmac->chanbase = chbase;
-	dmac->channels = chptr;
-
-	err = request_irq(irq, s3c64xx_dma_irq, 0, "DMA", dmac);
-	if (err < 0) {
-		printk(KERN_ERR "%s: failed to get irq\n", __func__);
-		goto err_clk;
-	}
-
-	regptr = regs + PL080_Cx_BASE(0);
-
-	for (ch = 0; ch < 8; ch++, chno++, chptr++) {
-		printk(KERN_INFO "%s: registering DMA %d (%p)\n",
-		       __func__, chno, regptr);
-
-		chptr->bit = 1 << ch;
-		chptr->number = chno;
-		chptr->dmac = dmac;
-		chptr->regs = regptr;
-		regptr += PL008_Cx_STRIDE;
-	}
-
-	/* for the moment, permanently enable the controller */
-	writel(PL080_CONFIG_ENABLE, regs + PL080_CONFIG);
-
-	printk(KERN_INFO "PL080: IRQ %d, at %p\n", irq, regs);
-
-	return 0;
-
-err_clk:
-	clk_disable(dmac->clk);
-	clk_put(dmac->clk);
-err_map:
-	iounmap(regs);
-err_dev:
-	sysdev_unregister(&dmac->sysdev);
-err_alloc:
-	kfree(dmac);
-	return err;
-}
-
-static int __init s3c64xx_dma_init(void)
-{
-	int ret;
-
-	printk(KERN_INFO "%s: Registering DMA channels\n", __func__);
-
-	dma_pool = dma_pool_create("DMA-LLI", NULL, sizeof(struct pl080s_lli), 16, 0);
-	if (!dma_pool) {
-		printk(KERN_ERR "%s: failed to create pool\n", __func__);
-		return -ENOMEM;
-	}
-
-	ret = sysdev_class_register(&dma_sysclass);
-	if (ret) {
-		printk(KERN_ERR "%s: failed to create sysclass\n", __func__);
-		return -ENOMEM;
-	}
-
-	/* Set all DMA configuration to be DMA, not SDMA */
-	writel(0xffffff, S3C_SYSREG(0x110));
-
-	/* Register standard DMA controlers */
-	s3c64xx_dma_init1(0, DMACH_UART0, IRQ_DMA0, 0x75000000);
-	s3c64xx_dma_init1(8, DMACH_PCM1_TX, IRQ_DMA1, 0x75100000);
-
-	return 0;
-}
-
-arch_initcall(s3c64xx_dma_init);
diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/plat-s3c64xx/gpiolib.c
deleted file mode 100644
index 778560457277..000000000000
--- a/arch/arm/plat-s3c64xx/gpiolib.c
+++ /dev/null
@@ -1,446 +0,0 @@
-/* arch/arm/plat-s3c64xx/gpiolib.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C64XX - GPIOlib support 
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <mach/map.h>
-#include <mach/gpio.h>
-#include <mach/gpio-core.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <plat/regs-gpio.h>
-
-/* GPIO bank summary:
- *
- * Bank	GPIOs	Style	SlpCon	ExtInt Group
- * A	8	4Bit	Yes	1
- * B	7	4Bit	Yes	1
- * C	8	4Bit	Yes	2
- * D	5	4Bit	Yes	3
- * E	5	4Bit	Yes	None
- * F	16	2Bit	Yes	4 [1]
- * G	7	4Bit	Yes	5
- * H	10	4Bit[2]	Yes	6
- * I	16	2Bit	Yes	None
- * J	12	2Bit	Yes	None
- * K	16	4Bit[2]	No	None
- * L	15	4Bit[2] No	None
- * M	6	4Bit	No	IRQ_EINT
- * N	16	2Bit	No	IRQ_EINT
- * O	16	2Bit	Yes	7
- * P	15	2Bit	Yes	8
- * Q	9	2Bit	Yes	9
- *
- * [1] BANKF pins 14,15 do not form part of the external interrupt sources
- * [2] BANK has two control registers, GPxCON0 and GPxCON1
- */
-
-#define OFF_GPCON	(0x00)
-#define OFF_GPDAT	(0x04)
-
-#define con_4bit_shift(__off) ((__off) * 4)
-
-#if 1
-#define gpio_dbg(x...) do { } while(0)
-#else
-#define gpio_dbg(x...) printk(KERN_DEBUG x)
-#endif
-
-/* The s3c64xx_gpiolib_4bit routines are to control the gpio banks where
- * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
- * following example:
- *
- * base + 0x00: Control register, 4 bits per gpio
- *	        gpio n: 4 bits starting at (4*n)
- *		0000 = input, 0001 = output, others mean special-function
- * base + 0x04: Data register, 1 bit per gpio
- *		bit n: data bit n
- *
- * Note, since the data register is one bit per gpio and is at base + 0x4
- * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of
- * the output.
-*/
-
-static int s3c64xx_gpiolib_4bit_input(struct gpio_chip *chip, unsigned offset)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long con;
-
-	con = __raw_readl(base + OFF_GPCON);
-	con &= ~(0xf << con_4bit_shift(offset));
-	__raw_writel(con, base + OFF_GPCON);
-
-	gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
-
-	return 0;
-}
-
-static int s3c64xx_gpiolib_4bit_output(struct gpio_chip *chip,
-				       unsigned offset, int value)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long con;
-	unsigned long dat;
-
-	con = __raw_readl(base + OFF_GPCON);
-	con &= ~(0xf << con_4bit_shift(offset));
-	con |= 0x1 << con_4bit_shift(offset);
-
-	dat = __raw_readl(base + OFF_GPDAT);
-	if (value)
-		dat |= 1 << offset;
-	else
-		dat &= ~(1 << offset);
-
-	__raw_writel(dat, base + OFF_GPDAT);
-	__raw_writel(con, base + OFF_GPCON);
-	__raw_writel(dat, base + OFF_GPDAT);
-
-	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
-
-	return 0;
-}
-
-/* The next set of routines are for the case where the GPIO configuration
- * registers are 4 bits per GPIO but there is more than one register (the
- * bank has more than 8 GPIOs.
- *
- * This case is the similar to the 4 bit case, but the registers are as
- * follows:
- *
- * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs)
- *	        gpio n: 4 bits starting at (4*n)
- *		0000 = input, 0001 = output, others mean special-function
- * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs)
- *	        gpio n: 4 bits starting at (4*n)
- *		0000 = input, 0001 = output, others mean special-function
- * base + 0x08: Data register, 1 bit per gpio
- *		bit n: data bit n
- *
- * To allow us to use the s3c_gpiolib_get and s3c_gpiolib_set routines we
- * store the 'base + 0x4' address so that these routines see the data
- * register at ourchip->base + 0x04.
-*/
-
-static int s3c64xx_gpiolib_4bit2_input(struct gpio_chip *chip, unsigned offset)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	void __iomem *regcon = base;
-	unsigned long con;
-
-	if (offset > 7)
-		offset -= 8;
-	else
-		regcon -= 4;
-
-	con = __raw_readl(regcon);
-	con &= ~(0xf << con_4bit_shift(offset));
-	__raw_writel(con, regcon);
-
-	gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con);
-
-	return 0;
-
-}
-
-static int s3c64xx_gpiolib_4bit2_output(struct gpio_chip *chip,
-				       unsigned offset, int value)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	void __iomem *regcon = base;
-	unsigned long con;
-	unsigned long dat;
-
-	if (offset > 7)
-		offset -= 8;
-	else
-		regcon -= 4;
-
-	con = __raw_readl(regcon);
-	con &= ~(0xf << con_4bit_shift(offset));
-	con |= 0x1 << con_4bit_shift(offset);
-
-	dat = __raw_readl(base + OFF_GPDAT);
-	if (value)
-		dat |= 1 << offset;
-	else
-		dat &= ~(1 << offset);
-
-	__raw_writel(dat, base + OFF_GPDAT);
-	__raw_writel(con, regcon);
-	__raw_writel(dat, base + OFF_GPDAT);
-
-	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
-
-	return 0;
-}
-
-static struct s3c_gpio_cfg gpio_4bit_cfg_noint = {
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_4bit_cfg_eint0111 = {
-	.cfg_eint	= 7,
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = {
-	.cfg_eint	= 3,
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-int s3c64xx_gpio2int_gpm(struct gpio_chip *chip, unsigned pin)
-{
-	return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
-}
-
-static struct s3c_gpio_chip gpio_4bit[] = {
-	{
-		.base	= S3C64XX_GPA_BASE,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPA(0),
-			.ngpio	= S3C64XX_GPIO_A_NR,
-			.label	= "GPA",
-		},
-	}, {
-		.base	= S3C64XX_GPB_BASE,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPB(0),
-			.ngpio	= S3C64XX_GPIO_B_NR,
-			.label	= "GPB",
-		},
-	}, {
-		.base	= S3C64XX_GPC_BASE,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPC(0),
-			.ngpio	= S3C64XX_GPIO_C_NR,
-			.label	= "GPC",
-		},
-	}, {
-		.base	= S3C64XX_GPD_BASE,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPD(0),
-			.ngpio	= S3C64XX_GPIO_D_NR,
-			.label	= "GPD",
-		},
-	}, {
-		.base	= S3C64XX_GPE_BASE,
-		.config	= &gpio_4bit_cfg_noint,
-		.chip	= {
-			.base	= S3C64XX_GPE(0),
-			.ngpio	= S3C64XX_GPIO_E_NR,
-			.label	= "GPE",
-		},
-	}, {
-		.base	= S3C64XX_GPG_BASE,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPG(0),
-			.ngpio	= S3C64XX_GPIO_G_NR,
-			.label	= "GPG",
-		},
-	}, {
-		.base	= S3C64XX_GPM_BASE,
-		.config	= &gpio_4bit_cfg_eint0011,
-		.chip	= {
-			.base	= S3C64XX_GPM(0),
-			.ngpio	= S3C64XX_GPIO_M_NR,
-			.label	= "GPM",
-			.to_irq = s3c64xx_gpio2int_gpm,
-		},
-	},
-};
-
-int s3c64xx_gpio2int_gpl(struct gpio_chip *chip, unsigned pin)
-{
-	return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
-}
-
-static struct s3c_gpio_chip gpio_4bit2[] = {
-	{
-		.base	= S3C64XX_GPH_BASE + 0x4,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPH(0),
-			.ngpio	= S3C64XX_GPIO_H_NR,
-			.label	= "GPH",
-		},
-	}, {
-		.base	= S3C64XX_GPK_BASE + 0x4,
-		.config	= &gpio_4bit_cfg_noint,
-		.chip	= {
-			.base	= S3C64XX_GPK(0),
-			.ngpio	= S3C64XX_GPIO_K_NR,
-			.label	= "GPK",
-		},
-	}, {
-		.base	= S3C64XX_GPL_BASE + 0x4,
-		.config	= &gpio_4bit_cfg_eint0011,
-		.chip	= {
-			.base	= S3C64XX_GPL(0),
-			.ngpio	= S3C64XX_GPIO_L_NR,
-			.label	= "GPL",
-			.to_irq = s3c64xx_gpio2int_gpl,
-		},
-	},
-};
-
-static struct s3c_gpio_cfg gpio_2bit_cfg_noint = {
-	.set_config	= s3c_gpio_setcfg_s3c24xx,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_2bit_cfg_eint10 = {
-	.cfg_eint	= 2,
-	.set_config	= s3c_gpio_setcfg_s3c24xx,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = {
-	.cfg_eint	= 3,
-	.set_config	= s3c_gpio_setcfg_s3c24xx,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-int s3c64xx_gpio2int_gpn(struct gpio_chip *chip, unsigned pin)
-{
-	return IRQ_EINT(0) + pin;
-}
-
-static struct s3c_gpio_chip gpio_2bit[] = {
-	{
-		.base	= S3C64XX_GPF_BASE,
-		.config	= &gpio_2bit_cfg_eint11,
-		.chip	= {
-			.base	= S3C64XX_GPF(0),
-			.ngpio	= S3C64XX_GPIO_F_NR,
-			.label	= "GPF",
-		},
-	}, {
-		.base	= S3C64XX_GPI_BASE,
-		.config	= &gpio_2bit_cfg_noint,
-		.chip	= {
-			.base	= S3C64XX_GPI(0),
-			.ngpio	= S3C64XX_GPIO_I_NR,
-			.label	= "GPI",
-		},
-	}, {
-		.base	= S3C64XX_GPJ_BASE,
-		.config	= &gpio_2bit_cfg_noint,
-		.chip	= {
-			.base	= S3C64XX_GPJ(0),
-			.ngpio	= S3C64XX_GPIO_J_NR,
-			.label	= "GPJ",
-		},
-	}, {
-		.base	= S3C64XX_GPN_BASE,
-		.config	= &gpio_2bit_cfg_eint10,
-		.chip	= {
-			.base	= S3C64XX_GPN(0),
-			.ngpio	= S3C64XX_GPIO_N_NR,
-			.label	= "GPN",
-			.to_irq = s3c64xx_gpio2int_gpn,
-		},
-	}, {
-		.base	= S3C64XX_GPO_BASE,
-		.config	= &gpio_2bit_cfg_eint11,
-		.chip	= {
-			.base	= S3C64XX_GPO(0),
-			.ngpio	= S3C64XX_GPIO_O_NR,
-			.label	= "GPO",
-		},
-	}, {
-		.base	= S3C64XX_GPP_BASE,
-		.config	= &gpio_2bit_cfg_eint11,
-		.chip	= {
-			.base	= S3C64XX_GPP(0),
-			.ngpio	= S3C64XX_GPIO_P_NR,
-			.label	= "GPP",
-		},
-	}, {
-		.base	= S3C64XX_GPQ_BASE,
-		.config	= &gpio_2bit_cfg_eint11,
-		.chip	= {
-			.base	= S3C64XX_GPQ(0),
-			.ngpio	= S3C64XX_GPIO_Q_NR,
-			.label	= "GPQ",
-		},
-	},
-};
-
-static __init void s3c64xx_gpiolib_add_4bit(struct s3c_gpio_chip *chip)
-{
-	chip->chip.direction_input = s3c64xx_gpiolib_4bit_input;
-	chip->chip.direction_output = s3c64xx_gpiolib_4bit_output;
-	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
-}
-
-static __init void s3c64xx_gpiolib_add_4bit2(struct s3c_gpio_chip *chip)
-{
-	chip->chip.direction_input = s3c64xx_gpiolib_4bit2_input;
-	chip->chip.direction_output = s3c64xx_gpiolib_4bit2_output;
-	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
-}
-
-static __init void s3c64xx_gpiolib_add_2bit(struct s3c_gpio_chip *chip)
-{
-	chip->pm = __gpio_pm(&s3c_gpio_pm_2bit);
-}
-
-static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips,
-				       int nr_chips,
-				       void (*fn)(struct s3c_gpio_chip *))
-{
-	for (; nr_chips > 0; nr_chips--, chips++) {
-		if (fn)
-			(fn)(chips);
-		s3c_gpiolib_add(chips);
-	}
-}
-
-static __init int s3c64xx_gpiolib_init(void)
-{
-	s3c64xx_gpiolib_add(gpio_4bit, ARRAY_SIZE(gpio_4bit),
-			    s3c64xx_gpiolib_add_4bit);
-
-	s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2),
-			    s3c64xx_gpiolib_add_4bit2);
-
-	s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit),
-			    s3c64xx_gpiolib_add_2bit);
-
-	return 0;
-}
-
-core_initcall(s3c64xx_gpiolib_init);
diff --git a/arch/arm/plat-s3c64xx/include/plat/dma-plat.h b/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
deleted file mode 100644
index 8f76a1e474d6..000000000000
--- a/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
- *
- * Copyright 2009 Openmoko, Inc.
- * Copyright 2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C64XX DMA core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */
-
-struct s3c64xx_dma_buff;
-
-/** s3c64xx_dma_buff - S3C64XX DMA buffer descriptor
- * @next: Pointer to next buffer in queue or ring.
- * @pw: Client provided identifier
- * @lli: Pointer to hardware descriptor this buffer is associated with.
- * @lli_dma: Hardare address of the descriptor.
- */
-struct s3c64xx_dma_buff {
-	struct s3c64xx_dma_buff *next;
-
-	void			*pw;
-	struct pl080s_lli	*lli;
-	dma_addr_t		 lli_dma;
-};
-
-struct s3c64xx_dmac;
-
-struct s3c2410_dma_chan {
-	unsigned char		 number;      /* number of this dma channel */
-	unsigned char		 in_use;      /* channel allocated */
-	unsigned char		 bit;	      /* bit for enable/disable/etc */
-	unsigned char		 hw_width;
-	unsigned char		 peripheral;
-
-	unsigned int		 flags;
-	enum s3c2410_dmasrc	 source;
-
-
-	dma_addr_t		dev_addr;
-
-	struct s3c2410_dma_client *client;
-	struct s3c64xx_dmac	*dmac;		/* pointer to controller */
-
-	void __iomem		*regs;
-
-	/* cdriver callbacks */
-	s3c2410_dma_cbfn_t	 callback_fn;	/* buffer done callback */
-	s3c2410_dma_opfn_t	 op_fn;		/* channel op callback */
-
-	/* buffer list and information */
-	struct s3c64xx_dma_buff	*curr;		/* current dma buffer */
-	struct s3c64xx_dma_buff	*next;		/* next buffer to load */
-	struct s3c64xx_dma_buff	*end;		/* end of queue */
-
-	/* note, when channel is running in circular mode, curr is the
-	 * first buffer enqueued, end is the last and curr is where the
-	 * last buffer-done event is set-at. The buffers are not freed
-	 * and the last buffer hardware descriptor points back to the
-	 * first.
-	 */
-};
-
-#include <plat/dma-core.h>
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h
deleted file mode 100644
index 9aa0e427d113..000000000000
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * 	Ben Dooks <ben@simtec.co.uk>
- * 	http://armlinux.simtec.co.uk/
- *
- * GPIO Bank A register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPACON			(S3C64XX_GPA_BASE + 0x00)
-#define S3C64XX_GPADAT			(S3C64XX_GPA_BASE + 0x04)
-#define S3C64XX_GPAPUD			(S3C64XX_GPA_BASE + 0x08)
-#define S3C64XX_GPACONSLP		(S3C64XX_GPA_BASE + 0x0c)
-#define S3C64XX_GPAPUDSLP		(S3C64XX_GPA_BASE + 0x10)
-
-#define S3C64XX_GPA_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
-#define S3C64XX_GPA_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
-#define S3C64XX_GPA_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
-
-#define S3C64XX_GPA0_UART_RXD0		(0x02 << 0)
-#define S3C64XX_GPA0_EINT_G1_0		(0x07 << 0)
-
-#define S3C64XX_GPA1_UART_TXD0		(0x02 << 4)
-#define S3C64XX_GPA1_EINT_G1_1		(0x07 << 4)
-
-#define S3C64XX_GPA2_UART_nCTS0		(0x02 << 8)
-#define S3C64XX_GPA2_EINT_G1_2		(0x07 << 8)
-
-#define S3C64XX_GPA3_UART_nRTS0		(0x02 << 12)
-#define S3C64XX_GPA3_EINT_G1_3		(0x07 << 12)
-
-#define S3C64XX_GPA4_UART_RXD1		(0x02 << 16)
-#define S3C64XX_GPA4_EINT_G1_4		(0x07 << 16)
-
-#define S3C64XX_GPA5_UART_TXD1		(0x02 << 20)
-#define S3C64XX_GPA5_EINT_G1_5		(0x07 << 20)
-
-#define S3C64XX_GPA6_UART_nCTS1		(0x02 << 24)
-#define S3C64XX_GPA6_EINT_G1_6		(0x07 << 24)
-
-#define S3C64XX_GPA7_UART_nRTS1		(0x02 << 28)
-#define S3C64XX_GPA7_EINT_G1_7		(0x07 << 28)
-
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h
deleted file mode 100644
index 3933adb4d50a..000000000000
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * 	Ben Dooks <ben@simtec.co.uk>
- * 	http://armlinux.simtec.co.uk/
- *
- * GPIO Bank B register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPBCON			(S3C64XX_GPB_BASE + 0x00)
-#define S3C64XX_GPBDAT			(S3C64XX_GPB_BASE + 0x04)
-#define S3C64XX_GPBPUD			(S3C64XX_GPB_BASE + 0x08)
-#define S3C64XX_GPBCONSLP		(S3C64XX_GPB_BASE + 0x0c)
-#define S3C64XX_GPBPUDSLP		(S3C64XX_GPB_BASE + 0x10)
-
-#define S3C64XX_GPB_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
-#define S3C64XX_GPB_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
-#define S3C64XX_GPB_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
-
-#define S3C64XX_GPB0_UART_RXD2		(0x02 << 0)
-#define S3C64XX_GPB0_EXTDMA_REQ		(0x03 << 0)
-#define S3C64XX_GPB0_IrDA_RXD		(0x04 << 0)
-#define S3C64XX_GPB0_ADDR_CF0		(0x05 << 0)
-#define S3C64XX_GPB0_EINT_G1_8		(0x07 << 0)
-
-#define S3C64XX_GPB1_UART_TXD2		(0x02 << 4)
-#define S3C64XX_GPB1_EXTDMA_ACK		(0x03 << 4)
-#define S3C64XX_GPB1_IrDA_TXD		(0x04 << 4)
-#define S3C64XX_GPB1_ADDR_CF1		(0x05 << 4)
-#define S3C64XX_GPB1_EINT_G1_9		(0x07 << 4)
-
-#define S3C64XX_GPB2_UART_RXD3		(0x02 << 8)
-#define S3C64XX_GPB2_IrDA_RXD		(0x03 << 8)
-#define S3C64XX_GPB2_EXTDMA_REQ		(0x04 << 8)
-#define S3C64XX_GPB2_ADDR_CF2		(0x05 << 8)
-#define S3C64XX_GPB2_I2C_SCL1		(0x06 << 8)
-#define S3C64XX_GPB2_EINT_G1_10		(0x07 << 8)
-
-#define S3C64XX_GPB3_UART_TXD3		(0x02 << 12)
-#define S3C64XX_GPB3_IrDA_TXD		(0x03 << 12)
-#define S3C64XX_GPB3_EXTDMA_ACK		(0x04 << 12)
-#define S3C64XX_GPB3_I2C_SDA1		(0x06 << 12)
-#define S3C64XX_GPB3_EINT_G1_11		(0x07 << 12)
-
-#define S3C64XX_GPB4_IrDA_SDBW		(0x02 << 16)
-#define S3C64XX_GPB4_CAM_FIELD		(0x03 << 16)
-#define S3C64XX_GPB4_CF_DATA_DIR	(0x04 << 16)
-#define S3C64XX_GPB4_EINT_G1_12		(0x07 << 16)
-
-#define S3C64XX_GPB5_I2C_SCL0		(0x02 << 20)
-#define S3C64XX_GPB5_EINT_G1_13		(0x07 << 20)
-
-#define S3C64XX_GPB6_I2C_SDA0		(0x02 << 24)
-#define S3C64XX_GPB6_EINT_G1_14		(0x07 << 24)
-
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h
deleted file mode 100644
index e22b49f4f982..000000000000
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * 	Ben Dooks <ben@simtec.co.uk>
- * 	http://armlinux.simtec.co.uk/
- *
- * GPIO Bank C register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPCCON			(S3C64XX_GPC_BASE + 0x00)
-#define S3C64XX_GPCDAT			(S3C64XX_GPC_BASE + 0x04)
-#define S3C64XX_GPCPUD			(S3C64XX_GPC_BASE + 0x08)
-#define S3C64XX_GPCCONSLP		(S3C64XX_GPC_BASE + 0x0c)
-#define S3C64XX_GPCPUDSLP		(S3C64XX_GPC_BASE + 0x10)
-
-#define S3C64XX_GPC_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
-#define S3C64XX_GPC_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
-#define S3C64XX_GPC_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
-
-#define S3C64XX_GPC0_SPI_MISO0		(0x02 << 0)
-#define S3C64XX_GPC0_EINT_G2_0		(0x07 << 0)
-
-#define S3C64XX_GPC1_SPI_CLKO		(0x02 << 4)
-#define S3C64XX_GPC1_EINT_G2_1		(0x07 << 4)
-
-#define S3C64XX_GPC2_SPI_MOSIO		(0x02 << 8)
-#define S3C64XX_GPC2_EINT_G2_2		(0x07 << 8)
-
-#define S3C64XX_GPC3_SPI_nCSO		(0x02 << 12)
-#define S3C64XX_GPC3_EINT_G2_3		(0x07 << 12)
-
-#define S3C64XX_GPC4_SPI_MISO1		(0x02 << 16)
-#define S3C64XX_GPC4_MMC2_CMD		(0x03 << 16)
-#define S3C64XX_GPC4_I2S_V40_DO0	(0x05 << 16)
-#define S3C64XX_GPC4_EINT_G2_4		(0x07 << 16)
-
-#define S3C64XX_GPC5_SPI_CLK1		(0x02 << 20)
-#define S3C64XX_GPC5_MMC2_CLK		(0x03 << 20)
-#define S3C64XX_GPC5_I2S_V40_DO1	(0x05 << 20)
-#define S3C64XX_GPC5_EINT_G2_5		(0x07 << 20)
-
-#define S3C64XX_GPC6_SPI_MOSI1		(0x02 << 24)
-#define S3C64XX_GPC6_EINT_G2_6		(0x07 << 24)
-
-#define S3C64XX_GPC7_SPI_nCS1		(0x02 << 28)
-#define S3C64XX_GPC7_I2S_V40_DO2	(0x05 << 28)
-#define S3C64XX_GPC7_EINT_G2_7		(0x07 << 28)
-
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h
deleted file mode 100644
index 6fe4a49c26f0..000000000000
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * 	Ben Dooks <ben@simtec.co.uk>
- * 	http://armlinux.simtec.co.uk/
- *
- * GPIO Bank D register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPDCON			(S3C64XX_GPD_BASE + 0x00)
-#define S3C64XX_GPDDAT			(S3C64XX_GPD_BASE + 0x04)
-#define S3C64XX_GPDPUD			(S3C64XX_GPD_BASE + 0x08)
-#define S3C64XX_GPDCONSLP		(S3C64XX_GPD_BASE + 0x0c)
-#define S3C64XX_GPDPUDSLP		(S3C64XX_GPD_BASE + 0x10)
-
-#define S3C64XX_GPD_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
-#define S3C64XX_GPD_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
-#define S3C64XX_GPD_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
-
-#define S3C64XX_GPD0_PCM0_SCLK		(0x02 << 0)
-#define S3C64XX_GPD0_I2S0_CLK		(0x03 << 0)
-#define S3C64XX_GPD0_AC97_BITCLK	(0x04 << 0)
-#define S3C64XX_GPD0_EINT_G3_0		(0x07 << 0)
-
-#define S3C64XX_GPD1_PCM0_EXTCLK	(0x02 << 4)
-#define S3C64XX_GPD1_I2S0_CDCLK		(0x03 << 4)
-#define S3C64XX_GPD1_AC97_nRESET	(0x04 << 4)
-#define S3C64XX_GPD1_EINT_G3_1		(0x07 << 4)
-
-#define S3C64XX_GPD2_PCM0_FSYNC		(0x02 << 8)
-#define S3C64XX_GPD2_I2S0_LRCLK		(0x03 << 8)
-#define S3C64XX_GPD2_AC97_SYNC		(0x04 << 8)
-#define S3C64XX_GPD2_EINT_G3_2		(0x07 << 8)
-
-#define S3C64XX_GPD3_PCM0_SIN		(0x02 << 12)
-#define S3C64XX_GPD3_I2S0_DI		(0x03 << 12)
-#define S3C64XX_GPD3_AC97_SDI		(0x04 << 12)
-#define S3C64XX_GPD3_EINT_G3_3		(0x07 << 12)
-
-#define S3C64XX_GPD4_PCM0_SOUT		(0x02 << 16)
-#define S3C64XX_GPD4_I2S0_D0		(0x03 << 16)
-#define S3C64XX_GPD4_AC97_SDO		(0x04 << 16)
-#define S3C64XX_GPD4_EINT_G3_4		(0x07 << 16)
-
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h
deleted file mode 100644
index 7fcf3d8e0a48..000000000000
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * 	Ben Dooks <ben@simtec.co.uk>
- * 	http://armlinux.simtec.co.uk/
- *
- * GPIO Bank E register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPECON			(S3C64XX_GPE_BASE + 0x00)
-#define S3C64XX_GPEDAT			(S3C64XX_GPE_BASE + 0x04)
-#define S3C64XX_GPEPUD			(S3C64XX_GPE_BASE + 0x08)
-#define S3C64XX_GPECONSLP		(S3C64XX_GPE_BASE + 0x0c)
-#define S3C64XX_GPEPUDSLP		(S3C64XX_GPE_BASE + 0x10)
-
-#define S3C64XX_GPE_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
-#define S3C64XX_GPE_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
-#define S3C64XX_GPE_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
-
-#define S3C64XX_GPE0_PCM1_SCLK		(0x02 << 0)
-#define S3C64XX_GPE0_I2S1_CLK		(0x03 << 0)
-#define S3C64XX_GPE0_AC97_BITCLK	(0x04 << 0)
-
-#define S3C64XX_GPE1_PCM1_EXTCLK	(0x02 << 4)
-#define S3C64XX_GPE1_I2S1_CDCLK		(0x03 << 4)
-#define S3C64XX_GPE1_AC97_nRESET	(0x04 << 4)
-
-#define S3C64XX_GPE2_PCM1_FSYNC		(0x02 << 8)
-#define S3C64XX_GPE2_I2S1_LRCLK		(0x03 << 8)
-#define S3C64XX_GPE2_AC97_SYNC		(0x04 << 8)
-
-#define S3C64XX_GPE3_PCM1_SIN		(0x02 << 12)
-#define S3C64XX_GPE3_I2S1_DI		(0x03 << 12)
-#define S3C64XX_GPE3_AC97_SDI		(0x04 << 12)
-
-#define S3C64XX_GPE4_PCM1_SOUT		(0x02 << 16)
-#define S3C64XX_GPE4_I2S1_D0		(0x03 << 16)
-#define S3C64XX_GPE4_AC97_SDO		(0x04 << 16)
-
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h
deleted file mode 100644
index f3faff974a18..000000000000
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * 	Ben Dooks <ben@simtec.co.uk>
- * 	http://armlinux.simtec.co.uk/
- *
- * GPIO Bank F register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPFCON			(S3C64XX_GPF_BASE + 0x00)
-#define S3C64XX_GPFDAT			(S3C64XX_GPF_BASE + 0x04)
-#define S3C64XX_GPFPUD			(S3C64XX_GPF_BASE + 0x08)
-#define S3C64XX_GPFCONSLP		(S3C64XX_GPF_BASE + 0x0c)
-#define S3C64XX_GPFPUDSLP		(S3C64XX_GPF_BASE + 0x10)
-
-#define S3C64XX_GPF_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
-#define S3C64XX_GPF_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
-#define S3C64XX_GPF_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
-
-#define S3C64XX_GPF0_CAMIF_CLK		(0x02 << 0)
-#define S3C64XX_GPF0_EINT_G4_0		(0x03 << 0)
-
-#define S3C64XX_GPF1_CAMIF_HREF		(0x02 << 2)
-#define S3C64XX_GPF1_EINT_G4_1		(0x03 << 2)
-
-#define S3C64XX_GPF2_CAMIF_PCLK		(0x02 << 4)
-#define S3C64XX_GPF2_EINT_G4_2		(0x03 << 4)
-
-#define S3C64XX_GPF3_CAMIF_nRST		(0x02 << 6)
-#define S3C64XX_GPF3_EINT_G4_3		(0x03 << 6)
-
-#define S3C64XX_GPF4_CAMIF_VSYNC	(0x02 << 8)
-#define S3C64XX_GPF4_EINT_G4_4		(0x03 << 8)
-
-#define S3C64XX_GPF5_CAMIF_YDATA0	(0x02 << 10)
-#define S3C64XX_GPF5_EINT_G4_5		(0x03 << 10)
-
-#define S3C64XX_GPF6_CAMIF_YDATA1	(0x02 << 12)
-#define S3C64XX_GPF6_EINT_G4_6		(0x03 << 12)
-
-#define S3C64XX_GPF7_CAMIF_YDATA2	(0x02 << 14)
-#define S3C64XX_GPF7_EINT_G4_7		(0x03 << 14)
-
-#define S3C64XX_GPF8_CAMIF_YDATA3	(0x02 << 16)
-#define S3C64XX_GPF8_EINT_G4_8		(0x03 << 16)
-
-#define S3C64XX_GPF9_CAMIF_YDATA4	(0x02 << 18)
-#define S3C64XX_GPF9_EINT_G4_9		(0x03 << 18)
-
-#define S3C64XX_GPF10_CAMIF_YDATA5	(0x02 << 20)
-#define S3C64XX_GPF10_EINT_G4_10	(0x03 << 20)
-
-#define S3C64XX_GPF11_CAMIF_YDATA6	(0x02 << 22)
-#define S3C64XX_GPF11_EINT_G4_11	(0x03 << 22)
-
-#define S3C64XX_GPF12_CAMIF_YDATA7	(0x02 << 24)
-#define S3C64XX_GPF12_EINT_G4_12	(0x03 << 24)
-
-#define S3C64XX_GPF13_PWM_ECLK		(0x02 << 26)
-#define S3C64XX_GPF13_EINT_G4_13	(0x03 << 26)
-
-#define S3C64XX_GPF14_PWM_TOUT0		(0x02 << 28)
-#define S3C64XX_GPF14_CLKOUT0		(0x03 << 28)
-
-#define S3C64XX_GPF15_PWM_TOUT1		(0x02 << 30)
-
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h
deleted file mode 100644
index 35bbd2378e55..000000000000
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * 	Ben Dooks <ben@simtec.co.uk>
- * 	http://armlinux.simtec.co.uk/
- *
- * GPIO Bank G register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPGCON			(S3C64XX_GPG_BASE + 0x00)
-#define S3C64XX_GPGDAT			(S3C64XX_GPG_BASE + 0x04)
-#define S3C64XX_GPGPUD			(S3C64XX_GPG_BASE + 0x08)
-#define S3C64XX_GPGCONSLP		(S3C64XX_GPG_BASE + 0x0c)
-#define S3C64XX_GPGPUDSLP		(S3C64XX_GPG_BASE + 0x10)
-
-#define S3C64XX_GPG_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
-#define S3C64XX_GPG_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
-#define S3C64XX_GPG_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
-
-#define S3C64XX_GPG0_MMC0_CLK		(0x02 << 0)
-#define S3C64XX_GPG0_EINT_G5_0		(0x07 << 0)
-
-#define S3C64XX_GPG1_MMC0_CMD		(0x02 << 4)
-#define S3C64XX_GPG1_EINT_G5_1		(0x07 << 4)
-
-#define S3C64XX_GPG2_MMC0_DATA0		(0x02 << 8)
-#define S3C64XX_GPG2_EINT_G5_2		(0x07 << 8)
-
-#define S3C64XX_GPG3_MMC0_DATA1		(0x02 << 12)
-#define S3C64XX_GPG3_EINT_G5_3		(0x07 << 12)
-
-#define S3C64XX_GPG4_MMC0_DATA2		(0x02 << 16)
-#define S3C64XX_GPG4_EINT_G5_4		(0x07 << 16)
-
-#define S3C64XX_GPG5_MMC0_DATA3		(0x02 << 20)
-#define S3C64XX_GPG5_EINT_G5_5		(0x07 << 20)
-
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h
deleted file mode 100644
index 2ba1767512d7..000000000000
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * 	Ben Dooks <ben@simtec.co.uk>
- * 	http://armlinux.simtec.co.uk/
- *
- * GPIO Bank H register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPHCON0			(S3C64XX_GPH_BASE + 0x00)
-#define S3C64XX_GPHCON1			(S3C64XX_GPH_BASE + 0x04)
-#define S3C64XX_GPHDAT			(S3C64XX_GPH_BASE + 0x08)
-#define S3C64XX_GPHPUD			(S3C64XX_GPH_BASE + 0x0c)
-#define S3C64XX_GPHCONSLP		(S3C64XX_GPH_BASE + 0x10)
-#define S3C64XX_GPHPUDSLP		(S3C64XX_GPH_BASE + 0x14)
-
-#define S3C64XX_GPH_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
-#define S3C64XX_GPH_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
-#define S3C64XX_GPH_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
-
-#define S3C64XX_GPH0_MMC1_CLK		(0x02 << 0)
-#define S3C64XX_GPH0_KP_COL0		(0x04 << 0)
-#define S3C64XX_GPH0_EINT_G6_0		(0x07 << 0)
-
-#define S3C64XX_GPH1_MMC1_CMD		(0x02 << 4)
-#define S3C64XX_GPH1_KP_COL1		(0x04 << 4)
-#define S3C64XX_GPH1_EINT_G6_1		(0x07 << 4)
-
-#define S3C64XX_GPH2_MMC1_DATA0		(0x02 << 8)
-#define S3C64XX_GPH2_KP_COL2		(0x04 << 8)
-#define S3C64XX_GPH2_EINT_G6_2		(0x07 << 8)
-
-#define S3C64XX_GPH3_MMC1_DATA1		(0x02 << 12)
-#define S3C64XX_GPH3_KP_COL3		(0x04 << 12)
-#define S3C64XX_GPH3_EINT_G6_3		(0x07 << 12)
-
-#define S3C64XX_GPH4_MMC1_DATA2		(0x02 << 16)
-#define S3C64XX_GPH4_KP_COL4		(0x04 << 16)
-#define S3C64XX_GPH4_EINT_G6_4		(0x07 << 16)
-
-#define S3C64XX_GPH5_MMC1_DATA3		(0x02 << 20)
-#define S3C64XX_GPH5_KP_COL5		(0x04 << 20)
-#define S3C64XX_GPH5_EINT_G6_5		(0x07 << 20)
-
-#define S3C64XX_GPH6_MMC1_DATA4		(0x02 << 24)
-#define S3C64XX_GPH6_MMC2_DATA0		(0x03 << 24)
-#define S3C64XX_GPH6_KP_COL6		(0x04 << 24)
-#define S3C64XX_GPH6_I2S_V40_BCLK	(0x05 << 24)
-#define S3C64XX_GPH6_ADDR_CF0		(0x06 << 24)
-#define S3C64XX_GPH6_EINT_G6_6		(0x07 << 24)
-
-#define S3C64XX_GPH7_MMC1_DATA5		(0x02 << 28)
-#define S3C64XX_GPH7_MMC2_DATA1		(0x03 << 28)
-#define S3C64XX_GPH7_KP_COL7		(0x04 << 28)
-#define S3C64XX_GPH7_I2S_V40_CDCLK	(0x05 << 28)
-#define S3C64XX_GPH7_ADDR_CF1		(0x06 << 28)
-#define S3C64XX_GPH7_EINT_G6_7		(0x07 << 28)
-
-#define S3C64XX_GPH8_MMC1_DATA6		(0x02 <<  0)
-#define S3C64XX_GPH8_MMC2_DATA2		(0x03 <<  0)
-#define S3C64XX_GPH8_I2S_V40_LRCLK	(0x05 <<  0)
-#define S3C64XX_GPH8_ADDR_CF2		(0x06 <<  0)
-#define S3C64XX_GPH8_EINT_G6_8		(0x07 <<  0)
-
-#define S3C64XX_GPH9_OUTPUT		(0x01 <<  4)
-#define S3C64XX_GPH9_MMC1_DATA7		(0x02 <<  4)
-#define S3C64XX_GPH9_MMC2_DATA3		(0x03 <<  4)
-#define S3C64XX_GPH9_I2S_V40_DI		(0x05 <<  4)
-#define S3C64XX_GPH9_EINT_G6_9		(0x07 <<  4)
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h
deleted file mode 100644
index ce9ebe335566..000000000000
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * 	Ben Dooks <ben@simtec.co.uk>
- * 	http://armlinux.simtec.co.uk/
- *
- * GPIO Bank I register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPICON			(S3C64XX_GPI_BASE + 0x00)
-#define S3C64XX_GPIDAT			(S3C64XX_GPI_BASE + 0x04)
-#define S3C64XX_GPIPUD			(S3C64XX_GPI_BASE + 0x08)
-#define S3C64XX_GPICONSLP		(S3C64XX_GPI_BASE + 0x0c)
-#define S3C64XX_GPIPUDSLP		(S3C64XX_GPI_BASE + 0x10)
-
-#define S3C64XX_GPI_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
-#define S3C64XX_GPI_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
-#define S3C64XX_GPI_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
-
-#define S3C64XX_GPI0_VD0		(0x02 << 0)
-#define S3C64XX_GPI1_VD1		(0x02 << 2)
-#define S3C64XX_GPI2_VD2		(0x02 << 4)
-#define S3C64XX_GPI3_VD3		(0x02 << 6)
-#define S3C64XX_GPI4_VD4		(0x02 << 8)
-#define S3C64XX_GPI5_VD5		(0x02 << 10)
-#define S3C64XX_GPI6_VD6		(0x02 << 12)
-#define S3C64XX_GPI7_VD7		(0x02 << 14)
-#define S3C64XX_GPI8_VD8		(0x02 << 16)
-#define S3C64XX_GPI9_VD9		(0x02 << 18)
-#define S3C64XX_GPI10_VD10		(0x02 << 20)
-#define S3C64XX_GPI11_VD11		(0x02 << 22)
-#define S3C64XX_GPI12_VD12		(0x02 << 24)
-#define S3C64XX_GPI13_VD13		(0x02 << 26)
-#define S3C64XX_GPI14_VD14		(0x02 << 28)
-#define S3C64XX_GPI15_VD15		(0x02 << 30)
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h
deleted file mode 100644
index 21a906299d30..000000000000
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * 	Ben Dooks <ben@simtec.co.uk>
- * 	http://armlinux.simtec.co.uk/
- *
- * GPIO Bank J register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPJCON			(S3C64XX_GPJ_BASE + 0x00)
-#define S3C64XX_GPJDAT			(S3C64XX_GPJ_BASE + 0x04)
-#define S3C64XX_GPJPUD			(S3C64XX_GPJ_BASE + 0x08)
-#define S3C64XX_GPJCONSLP		(S3C64XX_GPJ_BASE + 0x0c)
-#define S3C64XX_GPJPUDSLP		(S3C64XX_GPJ_BASE + 0x10)
-
-#define S3C64XX_GPJ_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
-#define S3C64XX_GPJ_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
-#define S3C64XX_GPJ_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
-
-#define S3C64XX_GPJ0_VD16		(0x02 << 0)
-#define S3C64XX_GPJ1_VD17		(0x02 << 2)
-#define S3C64XX_GPJ2_VD18		(0x02 << 4)
-#define S3C64XX_GPJ3_VD19		(0x02 << 6)
-#define S3C64XX_GPJ4_VD20		(0x02 << 8)
-#define S3C64XX_GPJ5_VD21		(0x02 << 10)
-#define S3C64XX_GPJ6_VD22		(0x02 << 12)
-#define S3C64XX_GPJ7_VD23		(0x02 << 14)
-#define S3C64XX_GPJ8_LCD_HSYNC		(0x02 << 16)
-#define S3C64XX_GPJ9_LCD_VSYNC		(0x02 << 18)
-#define S3C64XX_GPJ10_LCD_VDEN		(0x02 << 20)
-#define S3C64XX_GPJ11_LCD_VCLK		(0x02 << 22)
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h
deleted file mode 100644
index 569e76120881..000000000000
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * 	Ben Dooks <ben@simtec.co.uk>
- * 	http://armlinux.simtec.co.uk/
- *
- * GPIO Bank N register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPNCON			(S3C64XX_GPN_BASE + 0x00)
-#define S3C64XX_GPNDAT			(S3C64XX_GPN_BASE + 0x04)
-#define S3C64XX_GPNPUD			(S3C64XX_GPN_BASE + 0x08)
-
-#define S3C64XX_GPN_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
-#define S3C64XX_GPN_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
-#define S3C64XX_GPN_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
-
-#define S3C64XX_GPN0_EINT0		(0x02 << 0)
-#define S3C64XX_GPN0_KP_ROW0		(0x03 << 0)
-
-#define S3C64XX_GPN1_EINT1		(0x02 << 2)
-#define S3C64XX_GPN1_KP_ROW1		(0x03 << 2)
-
-#define S3C64XX_GPN2_EINT2		(0x02 << 4)
-#define S3C64XX_GPN2_KP_ROW2		(0x03 << 4)
-
-#define S3C64XX_GPN3_EINT3		(0x02 << 6)
-#define S3C64XX_GPN3_KP_ROW3		(0x03 << 6)
-
-#define S3C64XX_GPN4_EINT4		(0x02 << 8)
-#define S3C64XX_GPN4_KP_ROW4		(0x03 << 8)
-
-#define S3C64XX_GPN5_EINT5		(0x02 << 10)
-#define S3C64XX_GPN5_KP_ROW5		(0x03 << 10)
-
-#define S3C64XX_GPN6_EINT6		(0x02 << 12)
-#define S3C64XX_GPN6_KP_ROW6		(0x03 << 12)
-
-#define S3C64XX_GPN7_EINT7		(0x02 << 14)
-#define S3C64XX_GPN7_KP_ROW7		(0x03 << 14)
-
-#define S3C64XX_GPN8_EINT8		(0x02 << 16)
-#define S3C64XX_GPN9_EINT9		(0x02 << 18)
-#define S3C64XX_GPN10_EINT10		(0x02 << 20)
-#define S3C64XX_GPN11_EINT11		(0x02 << 22)
-#define S3C64XX_GPN12_EINT12		(0x02 << 24)
-#define S3C64XX_GPN13_EINT13		(0x02 << 26)
-#define S3C64XX_GPN14_EINT14		(0x02 << 28)
-#define S3C64XX_GPN15_EINT15		(0x02 << 30)
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h
deleted file mode 100644
index b09e12954b57..000000000000
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * 	Ben Dooks <ben@simtec.co.uk>
- * 	http://armlinux.simtec.co.uk/
- *
- * GPIO Bank O register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPOCON			(S3C64XX_GPO_BASE + 0x00)
-#define S3C64XX_GPODAT			(S3C64XX_GPO_BASE + 0x04)
-#define S3C64XX_GPOPUD			(S3C64XX_GPO_BASE + 0x08)
-#define S3C64XX_GPOCONSLP		(S3C64XX_GPO_BASE + 0x0c)
-#define S3C64XX_GPOPUDSLP		(S3C64XX_GPO_BASE + 0x10)
-
-#define S3C64XX_GPO_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
-#define S3C64XX_GPO_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
-#define S3C64XX_GPO_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
-
-#define S3C64XX_GPO0_MEM0_nCS2		(0x02 << 0)
-#define S3C64XX_GPO0_EINT_G7_0		(0x03 << 0)
-
-#define S3C64XX_GPO1_MEM0_nCS3		(0x02 << 2)
-#define S3C64XX_GPO1_EINT_G7_1		(0x03 << 2)
-
-#define S3C64XX_GPO2_MEM0_nCS4		(0x02 << 4)
-#define S3C64XX_GPO2_EINT_G7_2		(0x03 << 4)
-
-#define S3C64XX_GPO3_MEM0_nCS5		(0x02 << 6)
-#define S3C64XX_GPO3_EINT_G7_3		(0x03 << 6)
-
-#define S3C64XX_GPO4_EINT_G7_4		(0x03 << 8)
-
-#define S3C64XX_GPO5_EINT_G7_5		(0x03 << 10)
-
-#define S3C64XX_GPO6_MEM0_ADDR6		(0x02 << 12)
-#define S3C64XX_GPO6_EINT_G7_6		(0x03 << 12)
-
-#define S3C64XX_GPO7_MEM0_ADDR7		(0x02 << 14)
-#define S3C64XX_GPO7_EINT_G7_7		(0x03 << 14)
-
-#define S3C64XX_GPO8_MEM0_ADDR8		(0x02 << 16)
-#define S3C64XX_GPO8_EINT_G7_8		(0x03 << 16)
-
-#define S3C64XX_GPO9_MEM0_ADDR9		(0x02 << 18)
-#define S3C64XX_GPO9_EINT_G7_9		(0x03 << 18)
-
-#define S3C64XX_GPO10_MEM0_ADDR10	(0x02 << 20)
-#define S3C64XX_GPO10_EINT_G7_10	(0x03 << 20)
-
-#define S3C64XX_GPO11_MEM0_ADDR11	(0x02 << 22)
-#define S3C64XX_GPO11_EINT_G7_11	(0x03 << 22)
-
-#define S3C64XX_GPO12_MEM0_ADDR12	(0x02 << 24)
-#define S3C64XX_GPO12_EINT_G7_12	(0x03 << 24)
-
-#define S3C64XX_GPO13_MEM0_ADDR13	(0x02 << 26)
-#define S3C64XX_GPO13_EINT_G7_13	(0x03 << 26)
-
-#define S3C64XX_GPO14_MEM0_ADDR14	(0x02 << 28)
-#define S3C64XX_GPO14_EINT_G7_14	(0x03 << 28)
-
-#define S3C64XX_GPO15_MEM0_ADDR15	(0x02 << 30)
-#define S3C64XX_GPO15_EINT_G7_15	(0x03 << 30)
-
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h
deleted file mode 100644
index 92f00517926b..000000000000
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * 	Ben Dooks <ben@simtec.co.uk>
- * 	http://armlinux.simtec.co.uk/
- *
- * GPIO Bank P register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPPCON			(S3C64XX_GPP_BASE + 0x00)
-#define S3C64XX_GPPDAT			(S3C64XX_GPP_BASE + 0x04)
-#define S3C64XX_GPPPUD			(S3C64XX_GPP_BASE + 0x08)
-#define S3C64XX_GPPCONSLP		(S3C64XX_GPP_BASE + 0x0c)
-#define S3C64XX_GPPPUDSLP		(S3C64XX_GPP_BASE + 0x10)
-
-#define S3C64XX_GPP_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
-#define S3C64XX_GPP_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
-#define S3C64XX_GPP_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
-
-#define S3C64XX_GPP0_MEM0_ADDRV		(0x02 << 0)
-#define S3C64XX_GPP0_EINT_G8_0		(0x03 << 0)
-
-#define S3C64XX_GPP1_MEM0_SMCLK		(0x02 << 2)
-#define S3C64XX_GPP1_EINT_G8_1		(0x03 << 2)
-
-#define S3C64XX_GPP2_MEM0_nWAIT		(0x02 << 4)
-#define S3C64XX_GPP2_EINT_G8_2		(0x03 << 4)
-
-#define S3C64XX_GPP3_MEM0_RDY0_ALE	(0x02 << 6)
-#define S3C64XX_GPP3_EINT_G8_3		(0x03 << 6)
-
-#define S3C64XX_GPP4_MEM0_RDY1_CLE	(0x02 << 8)
-#define S3C64XX_GPP4_EINT_G8_4		(0x03 << 8)
-
-#define S3C64XX_GPP5_MEM0_INTsm0_FWE	(0x02 << 10)
-#define S3C64XX_GPP5_EINT_G8_5		(0x03 << 10)
-
-#define S3C64XX_GPP6_MEM0_(null)	(0x02 << 12)
-#define S3C64XX_GPP6_EINT_G8_6		(0x03 << 12)
-
-#define S3C64XX_GPP7_MEM0_INTsm1_FRE	(0x02 << 14)
-#define S3C64XX_GPP7_EINT_G8_7		(0x03 << 14)
-
-#define S3C64XX_GPP8_MEM0_RPn_RnB	(0x02 << 16)
-#define S3C64XX_GPP8_EINT_G8_8		(0x03 << 16)
-
-#define S3C64XX_GPP9_MEM0_ATA_RESET	(0x02 << 18)
-#define S3C64XX_GPP9_EINT_G8_9		(0x03 << 18)
-
-#define S3C64XX_GPP10_MEM0_ATA_INPACK	(0x02 << 20)
-#define S3C64XX_GPP10_EINT_G8_10	(0x03 << 20)
-
-#define S3C64XX_GPP11_MEM0_ATA_REG	(0x02 << 22)
-#define S3C64XX_GPP11_EINT_G8_11	(0x03 << 22)
-
-#define S3C64XX_GPP12_MEM0_ATA_WE	(0x02 << 24)
-#define S3C64XX_GPP12_EINT_G8_12	(0x03 << 24)
-
-#define S3C64XX_GPP13_MEM0_ATA_OE	(0x02 << 26)
-#define S3C64XX_GPP13_EINT_G8_13	(0x03 << 26)
-
-#define S3C64XX_GPP14_MEM0_ATA_CD	(0x02 << 28)
-#define S3C64XX_GPP14_EINT_G8_14	(0x03 << 28)
-
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h
deleted file mode 100644
index 565e60aaee47..000000000000
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * 	Ben Dooks <ben@simtec.co.uk>
- * 	http://armlinux.simtec.co.uk/
- *
- * GPIO Bank Q register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPQCON			(S3C64XX_GPQ_BASE + 0x00)
-#define S3C64XX_GPQDAT			(S3C64XX_GPQ_BASE + 0x04)
-#define S3C64XX_GPQPUD			(S3C64XX_GPQ_BASE + 0x08)
-#define S3C64XX_GPQCONSLP		(S3C64XX_GPQ_BASE + 0x0c)
-#define S3C64XX_GPQPUDSLP		(S3C64XX_GPQ_BASE + 0x10)
-
-#define S3C64XX_GPQ_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
-#define S3C64XX_GPQ_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
-#define S3C64XX_GPQ_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
-
-#define S3C64XX_GPQ0_MEM0_ADDR18_RAS	(0x02 << 0)
-#define S3C64XX_GPQ0_EINT_G9_0		(0x03 << 0)
-
-#define S3C64XX_GPQ1_MEM0_ADDR19_CAS	(0x02 << 2)
-#define S3C64XX_GPQ1_EINT_G9_1		(0x03 << 2)
-
-#define S3C64XX_GPQ2_EINT_G9_2		(0x03 << 4)
-
-#define S3C64XX_GPQ3_EINT_G9_3		(0x03 << 6)
-
-#define S3C64XX_GPQ4_EINT_G9_4		(0x03 << 8)
-
-#define S3C64XX_GPQ5_EINT_G9_5		(0x03 << 10)
-
-#define S3C64XX_GPQ6_EINT_G9_6		(0x03 << 12)
-
-#define S3C64XX_GPQ7_MEM0_ADDR17_WENDMC	(0x02 << 14)
-#define S3C64XX_GPQ7_EINT_G9_7		(0x03 << 14)
-
-#define S3C64XX_GPQ8_MEM0_ADDR16_APDMC	(0x02 << 16)
-#define S3C64XX_GPQ8_EINT_G9_8		(0x03 << 16)
-
diff --git a/arch/arm/plat-s3c64xx/include/plat/irqs.h b/arch/arm/plat-s3c64xx/include/plat/irqs.h
deleted file mode 100644
index 7956fd3bb194..000000000000
--- a/arch/arm/plat-s3c64xx/include/plat/irqs.h
+++ /dev/null
@@ -1,210 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/include/mach/irqs.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C64XX - Common IRQ support
- */
-
-#ifndef __ASM_PLAT_S3C64XX_IRQS_H
-#define __ASM_PLAT_S3C64XX_IRQS_H __FILE__
-
-/* we keep the first set of CPU IRQs out of the range of
- * the ISA space, so that the PC104 has them to itself
- * and we don't end up having to do horrible things to the
- * standard ISA drivers....
- *
- * note, since we're using the VICs, our start must be a
- * mulitple of 32 to allow the common code to work
- */
-
-#define S3C_IRQ_OFFSET	(32)
-
-#define S3C_IRQ(x)	((x) + S3C_IRQ_OFFSET)
-
-#define S3C_VIC0_BASE	S3C_IRQ(0)
-#define S3C_VIC1_BASE	S3C_IRQ(32)
-
-/* UART interrupts, each UART has 4 intterupts per channel so
- * use the space between the ISA and S3C main interrupts. Note, these
- * are not in the same order as the S3C24XX series! */
-
-#define IRQ_S3CUART_BASE0	(16)
-#define IRQ_S3CUART_BASE1	(20)
-#define IRQ_S3CUART_BASE2	(24)
-#define IRQ_S3CUART_BASE3	(28)
-
-#define UART_IRQ_RXD		(0)
-#define UART_IRQ_ERR		(1)
-#define UART_IRQ_TXD		(2)
-#define UART_IRQ_MODEM		(3)
-
-#define IRQ_S3CUART_RX0		(IRQ_S3CUART_BASE0 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX0		(IRQ_S3CUART_BASE0 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR0	(IRQ_S3CUART_BASE0 + UART_IRQ_ERR)
-
-#define IRQ_S3CUART_RX1		(IRQ_S3CUART_BASE1 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX1		(IRQ_S3CUART_BASE1 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR1	(IRQ_S3CUART_BASE1 + UART_IRQ_ERR)
-
-#define IRQ_S3CUART_RX2		(IRQ_S3CUART_BASE2 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX2		(IRQ_S3CUART_BASE2 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR2	(IRQ_S3CUART_BASE2 + UART_IRQ_ERR)
-
-#define IRQ_S3CUART_RX3		(IRQ_S3CUART_BASE3 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX3		(IRQ_S3CUART_BASE3 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR3	(IRQ_S3CUART_BASE3 + UART_IRQ_ERR)
-
-/* VIC based IRQs */
-
-#define S3C64XX_IRQ_VIC0(x)	(S3C_VIC0_BASE + (x))
-#define S3C64XX_IRQ_VIC1(x)	(S3C_VIC1_BASE + (x))
-
-/* VIC0 */
-
-#define IRQ_EINT0_3		S3C64XX_IRQ_VIC0(0)
-#define IRQ_EINT4_11		S3C64XX_IRQ_VIC0(1)
-#define IRQ_RTC_TIC		S3C64XX_IRQ_VIC0(2)
-#define IRQ_CAMIF_C		S3C64XX_IRQ_VIC0(3)
-#define IRQ_CAMIF_P		S3C64XX_IRQ_VIC0(4)
-#define IRQ_CAMIF_MC		S3C64XX_IRQ_VIC0(5)
-#define IRQ_S3C6410_IIC1	S3C64XX_IRQ_VIC0(5)
-#define IRQ_S3C6410_IIS		S3C64XX_IRQ_VIC0(6)
-#define IRQ_S3C6400_CAMIF_MP	S3C64XX_IRQ_VIC0(6)
-#define IRQ_CAMIF_WE_C		S3C64XX_IRQ_VIC0(7)
-#define IRQ_S3C6410_G3D		S3C64XX_IRQ_VIC0(8)
-#define IRQ_S3C6400_CAMIF_WE_P	S3C64XX_IRQ_VIC0(8)
-#define IRQ_POST0		S3C64XX_IRQ_VIC0(9)
-#define IRQ_ROTATOR		S3C64XX_IRQ_VIC0(10)
-#define IRQ_2D			S3C64XX_IRQ_VIC0(11)
-#define IRQ_TVENC		S3C64XX_IRQ_VIC0(12)
-#define IRQ_SCALER		S3C64XX_IRQ_VIC0(13)
-#define IRQ_BATF		S3C64XX_IRQ_VIC0(14)
-#define IRQ_JPEG		S3C64XX_IRQ_VIC0(15)
-#define IRQ_MFC			S3C64XX_IRQ_VIC0(16)
-#define IRQ_SDMA0		S3C64XX_IRQ_VIC0(17)
-#define IRQ_SDMA1		S3C64XX_IRQ_VIC0(18)
-#define IRQ_ARM_DMAERR		S3C64XX_IRQ_VIC0(19)
-#define IRQ_ARM_DMA		S3C64XX_IRQ_VIC0(20)
-#define IRQ_ARM_DMAS		S3C64XX_IRQ_VIC0(21)
-#define IRQ_KEYPAD		S3C64XX_IRQ_VIC0(22)
-#define IRQ_TIMER0_VIC		S3C64XX_IRQ_VIC0(23)
-#define IRQ_TIMER1_VIC		S3C64XX_IRQ_VIC0(24)
-#define IRQ_TIMER2_VIC		S3C64XX_IRQ_VIC0(25)
-#define IRQ_WDT			S3C64XX_IRQ_VIC0(26)
-#define IRQ_TIMER3_VIC		S3C64XX_IRQ_VIC0(27)
-#define IRQ_TIMER4_VIC		S3C64XX_IRQ_VIC0(28)
-#define IRQ_LCD_FIFO		S3C64XX_IRQ_VIC0(29)
-#define IRQ_LCD_VSYNC		S3C64XX_IRQ_VIC0(30)
-#define IRQ_LCD_SYSTEM		S3C64XX_IRQ_VIC0(31)
-
-/* VIC1 */
-
-#define IRQ_EINT12_19		S3C64XX_IRQ_VIC1(0)
-#define IRQ_EINT20_27		S3C64XX_IRQ_VIC1(1)
-#define IRQ_PCM0		S3C64XX_IRQ_VIC1(2)
-#define IRQ_PCM1		S3C64XX_IRQ_VIC1(3)
-#define IRQ_AC97		S3C64XX_IRQ_VIC1(4)
-#define IRQ_UART0		S3C64XX_IRQ_VIC1(5)
-#define IRQ_UART1		S3C64XX_IRQ_VIC1(6)
-#define IRQ_UART2		S3C64XX_IRQ_VIC1(7)
-#define IRQ_UART3		S3C64XX_IRQ_VIC1(8)
-#define IRQ_DMA0		S3C64XX_IRQ_VIC1(9)
-#define IRQ_DMA1		S3C64XX_IRQ_VIC1(10)
-#define IRQ_ONENAND0		S3C64XX_IRQ_VIC1(11)
-#define IRQ_ONENAND1		S3C64XX_IRQ_VIC1(12)
-#define IRQ_NFC			S3C64XX_IRQ_VIC1(13)
-#define IRQ_CFCON		S3C64XX_IRQ_VIC1(14)
-#define IRQ_USBH		S3C64XX_IRQ_VIC1(15)
-#define IRQ_SPI0		S3C64XX_IRQ_VIC1(16)
-#define IRQ_SPI1		S3C64XX_IRQ_VIC1(17)
-#define IRQ_IIC			S3C64XX_IRQ_VIC1(18)
-#define IRQ_HSItx		S3C64XX_IRQ_VIC1(19)
-#define IRQ_HSIrx		S3C64XX_IRQ_VIC1(20)
-#define IRQ_RESERVED		S3C64XX_IRQ_VIC1(21)
-#define IRQ_MSM			S3C64XX_IRQ_VIC1(22)
-#define IRQ_HOSTIF		S3C64XX_IRQ_VIC1(23)
-#define IRQ_HSMMC0		S3C64XX_IRQ_VIC1(24)
-#define IRQ_HSMMC1		S3C64XX_IRQ_VIC1(25)
-#define IRQ_HSMMC2		IRQ_SPI1	/* shared with SPI1 */
-#define IRQ_OTG			S3C64XX_IRQ_VIC1(26)
-#define IRQ_IRDA		S3C64XX_IRQ_VIC1(27)
-#define IRQ_RTC_ALARM		S3C64XX_IRQ_VIC1(28)
-#define IRQ_SEC			S3C64XX_IRQ_VIC1(29)
-#define IRQ_PENDN		S3C64XX_IRQ_VIC1(30)
-#define IRQ_TC			IRQ_PENDN
-#define IRQ_ADC			S3C64XX_IRQ_VIC1(31)
-
-#define S3C64XX_TIMER_IRQ(x)	S3C_IRQ(64 + (x))
-
-#define IRQ_TIMER0		S3C64XX_TIMER_IRQ(0)
-#define IRQ_TIMER1		S3C64XX_TIMER_IRQ(1)
-#define IRQ_TIMER2		S3C64XX_TIMER_IRQ(2)
-#define IRQ_TIMER3		S3C64XX_TIMER_IRQ(3)
-#define IRQ_TIMER4		S3C64XX_TIMER_IRQ(4)
-
-/* compatibility for device defines */
-
-#define IRQ_IIC1		IRQ_S3C6410_IIC1
-
-/* Since the IRQ_EINT(x) are a linear mapping on current s3c64xx series
- * we just defined them as an IRQ_EINT(x) macro from S3C_IRQ_EINT_BASE
- * which we place after the pair of VICs. */
-
-#define S3C_IRQ_EINT_BASE	S3C_IRQ(64+5)
-
-#define S3C_EINT(x)		((x) + S3C_IRQ_EINT_BASE)
-#define IRQ_EINT(x)		S3C_EINT(x)
-#define IRQ_EINT_BIT(x)		((x) - S3C_EINT(0))
-
-/* Next the external interrupt groups. These are similar to the IRQ_EINT(x)
- * that they are sourced from the GPIO pins but with a different scheme for
- * priority and source indication.
- *
- * The IRQ_EINT(x) can be thought of as 'group 0' of the available GPIO
- * interrupts, but for historical reasons they are kept apart from these
- * next interrupts.
- *
- * Use IRQ_EINT_GROUP(group, offset) to get the number for use in the
- * machine specific support files.
- */
-
-#define IRQ_EINT_GROUP1_NR	(15)
-#define IRQ_EINT_GROUP2_NR	(8)
-#define IRQ_EINT_GROUP3_NR	(5)
-#define IRQ_EINT_GROUP4_NR	(14)
-#define IRQ_EINT_GROUP5_NR	(7)
-#define IRQ_EINT_GROUP6_NR	(10)
-#define IRQ_EINT_GROUP7_NR	(16)
-#define IRQ_EINT_GROUP8_NR	(15)
-#define IRQ_EINT_GROUP9_NR	(9)
-
-#define IRQ_EINT_GROUP_BASE	S3C_EINT(28)
-#define IRQ_EINT_GROUP1_BASE	(IRQ_EINT_GROUP_BASE + 0x00)
-#define IRQ_EINT_GROUP2_BASE	(IRQ_EINT_GROUP1_BASE + IRQ_EINT_GROUP1_NR)
-#define IRQ_EINT_GROUP3_BASE	(IRQ_EINT_GROUP2_BASE + IRQ_EINT_GROUP2_NR)
-#define IRQ_EINT_GROUP4_BASE	(IRQ_EINT_GROUP3_BASE + IRQ_EINT_GROUP3_NR)
-#define IRQ_EINT_GROUP5_BASE	(IRQ_EINT_GROUP4_BASE + IRQ_EINT_GROUP4_NR)
-#define IRQ_EINT_GROUP6_BASE	(IRQ_EINT_GROUP5_BASE + IRQ_EINT_GROUP5_NR)
-#define IRQ_EINT_GROUP7_BASE	(IRQ_EINT_GROUP6_BASE + IRQ_EINT_GROUP6_NR)
-#define IRQ_EINT_GROUP8_BASE	(IRQ_EINT_GROUP7_BASE + IRQ_EINT_GROUP7_NR)
-#define IRQ_EINT_GROUP9_BASE	(IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR)
-
-#define IRQ_EINT_GROUP(group, no)	(IRQ_EINT_GROUP##group##_BASE + (no))
-
-/* Define a group of interrupts for board-specific use (eg, for MFD
- * interrupt controllers). */
-#define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
-
-#define IRQ_BOARD_NR 16
-
-#define IRQ_BOARD_END (IRQ_BOARD_START + IRQ_BOARD_NR)
-
-/* Set the default NR_IRQS */
-
-#define NR_IRQS	(IRQ_BOARD_END + 1)
-
-#endif /* __ASM_PLAT_S3C64XX_IRQS_H */
-
diff --git a/arch/arm/plat-s3c64xx/include/plat/pll.h b/arch/arm/plat-s3c64xx/include/plat/pll.h
deleted file mode 100644
index 90bbd72fdc4e..000000000000
--- a/arch/arm/plat-s3c64xx/include/plat/pll.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/* arch/arm/plat-s3c64xx/include/plat/pll.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C64XX PLL code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C6400_PLL_MDIV_MASK	((1 << (25-16+1)) - 1)
-#define S3C6400_PLL_PDIV_MASK	((1 << (13-8+1)) - 1)
-#define S3C6400_PLL_SDIV_MASK	((1 << (2-0+1)) - 1)
-#define S3C6400_PLL_MDIV_SHIFT	(16)
-#define S3C6400_PLL_PDIV_SHIFT	(8)
-#define S3C6400_PLL_SDIV_SHIFT	(0)
-
-#include <asm/div64.h>
-
-static inline unsigned long s3c6400_get_pll(unsigned long baseclk,
-					    u32 pllcon)
-{
-	u32 mdiv, pdiv, sdiv;
-	u64 fvco = baseclk;
-
-	mdiv = (pllcon >> S3C6400_PLL_MDIV_SHIFT) & S3C6400_PLL_MDIV_MASK;
-	pdiv = (pllcon >> S3C6400_PLL_PDIV_SHIFT) & S3C6400_PLL_PDIV_MASK;
-	sdiv = (pllcon >> S3C6400_PLL_SDIV_SHIFT) & S3C6400_PLL_SDIV_MASK;
-
-	fvco *= mdiv;
-	do_div(fvco, (pdiv << sdiv));
-
-	return (unsigned long)fvco;
-}
-
-#define S3C6400_EPLL_MDIV_MASK	((1 << (23-16)) - 1)
-#define S3C6400_EPLL_PDIV_MASK	((1 << (13-8)) - 1)
-#define S3C6400_EPLL_SDIV_MASK	((1 << (2-0)) - 1)
-#define S3C6400_EPLL_MDIV_SHIFT	(16)
-#define S3C6400_EPLL_PDIV_SHIFT	(8)
-#define S3C6400_EPLL_SDIV_SHIFT	(0)
-#define S3C6400_EPLL_KDIV_MASK  (0xffff)
-
-static inline unsigned long s3c6400_get_epll(unsigned long baseclk)
-{
-	unsigned long result;
-	u32 epll0 = __raw_readl(S3C_EPLL_CON0);
-	u32 epll1 = __raw_readl(S3C_EPLL_CON1);
-	u32 mdiv, pdiv, sdiv, kdiv;
-	u64 tmp;
-
-	mdiv = (epll0 >> S3C6400_EPLL_MDIV_SHIFT) & S3C6400_EPLL_MDIV_MASK;
-	pdiv = (epll0 >> S3C6400_EPLL_PDIV_SHIFT) & S3C6400_EPLL_PDIV_MASK;
-	sdiv = (epll0 >> S3C6400_EPLL_SDIV_SHIFT) & S3C6400_EPLL_SDIV_MASK;
-	kdiv = epll1 & S3C6400_EPLL_KDIV_MASK;
-
-	/* We need to multiple baseclk by mdiv (the integer part) and kdiv
-	 * which is in 2^16ths, so shift mdiv up (does not overflow) and
-	 * add kdiv before multiplying. The use of tmp is to avoid any
-	 * overflows before shifting bac down into result when multipling
-	 * by the mdiv and kdiv pair.
-	 */
-
-	tmp = baseclk;
-	tmp *= (mdiv << 16) + kdiv;
-	do_div(tmp, (pdiv << sdiv));
-	result = tmp >> 16;
-
-	return result;
-}
diff --git a/arch/arm/plat-s3c64xx/include/plat/pm-core.h b/arch/arm/plat-s3c64xx/include/plat/pm-core.h
deleted file mode 100644
index d347de3ba0dc..000000000000
--- a/arch/arm/plat-s3c64xx/include/plat/pm-core.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/pm-core.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C64XX - PM core support for arch/arm/plat-s3c/pm.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <plat/regs-gpio.h>
-
-static inline void s3c_pm_debug_init_uart(void)
-{
-	u32 tmp = __raw_readl(S3C_PCLK_GATE);
-
-	/* As a note, since the S3C64XX UARTs generally have multiple
-	 * clock sources, we simply enable PCLK at the moment and hope
-	 * that the resume settings for the UART are suitable for the
-	 * use with PCLK.
-	 */
-
-	tmp |= S3C_CLKCON_PCLK_UART0;
-	tmp |= S3C_CLKCON_PCLK_UART1;
-	tmp |= S3C_CLKCON_PCLK_UART2;
-	tmp |= S3C_CLKCON_PCLK_UART3;
-
-	__raw_writel(tmp, S3C_PCLK_GATE);
-	udelay(10);
-}
-
-static inline void s3c_pm_arch_prepare_irqs(void)
-{
-	/* VIC should have already been taken care of */
-
-	/* clear any pending EINT0 interrupts */
-	__raw_writel(__raw_readl(S3C64XX_EINT0PEND), S3C64XX_EINT0PEND);
-}
-
-static inline void s3c_pm_arch_stop_clocks(void)
-{
-}
-
-static inline void s3c_pm_arch_show_resume_irqs(void)
-{
-}
-
-/* make these defines, we currently do not have any need to change
- * the IRQ wake controls depending on the CPU we are running on */
-
-#define s3c_irqwake_eintallow	((1 << 28) - 1)
-#define s3c_irqwake_intallow	(0)
-
-static inline void s3c_pm_arch_update_uart(void __iomem *regs,
-					   struct pm_uart_save *save)
-{
-	u32 ucon = __raw_readl(regs + S3C2410_UCON);
-	u32 ucon_clk = ucon & S3C6400_UCON_CLKMASK;
-	u32 save_clk = save->ucon & S3C6400_UCON_CLKMASK;
-	u32 new_ucon;
-	u32 delta;
-
-	/* S3C64XX UART blocks only support level interrupts, so ensure that
-	 * when we restore unused UART blocks we force the level interrupt
-	 * settigs. */
-	save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL;
-
-	/* We have a constraint on changing the clock type of the UART
-	 * between UCLKx and PCLK, so ensure that when we restore UCON
-	 * that the CLK field is correctly modified if the bootloader
-	 * has changed anything.
-	 */
-	if (ucon_clk != save_clk) {
-		new_ucon = save->ucon;
-		delta = ucon_clk ^ save_clk;
-
-		/* change from UCLKx => wrong PCLK,
-		 * either UCLK can be tested for by a bit-test
-		 * with UCLK0 */
-		if (ucon_clk & S3C6400_UCON_UCLK0 &&
-		    !(save_clk & S3C6400_UCON_UCLK0) &&
-		    delta & S3C6400_UCON_PCLK2) {
-			new_ucon &= ~S3C6400_UCON_UCLK0;
-		} else if (delta == S3C6400_UCON_PCLK2) {
-			/* as an precaution, don't change from
-			 * PCLK2 => PCLK or vice-versa */
-			new_ucon ^= S3C6400_UCON_PCLK2;
-		}
-
-		S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n",
-			  ucon, new_ucon, save->ucon);
-		save->ucon = new_ucon;
-	}
-}
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
deleted file mode 100644
index ff46e7fa957a..000000000000
--- a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
+++ /dev/null
@@ -1,225 +0,0 @@
-/* arch/arm/plat-s3c64xx/include/plat/regs-clock.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C64XX clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_REGS_CLOCK_H
-#define __PLAT_REGS_CLOCK_H __FILE__
-
-#define S3C_CLKREG(x)		(S3C_VA_SYS + (x))
-
-#define S3C_APLL_LOCK		S3C_CLKREG(0x00)
-#define S3C_MPLL_LOCK		S3C_CLKREG(0x04)
-#define S3C_EPLL_LOCK		S3C_CLKREG(0x08)
-#define S3C_APLL_CON		S3C_CLKREG(0x0C)
-#define S3C_MPLL_CON		S3C_CLKREG(0x10)
-#define S3C_EPLL_CON0		S3C_CLKREG(0x14)
-#define S3C_EPLL_CON1		S3C_CLKREG(0x18)
-#define S3C_CLK_SRC		S3C_CLKREG(0x1C)
-#define S3C_CLK_DIV0		S3C_CLKREG(0x20)
-#define S3C_CLK_DIV1		S3C_CLKREG(0x24)
-#define S3C_CLK_DIV2		S3C_CLKREG(0x28)
-#define S3C_CLK_OUT		S3C_CLKREG(0x2C)
-#define S3C_HCLK_GATE		S3C_CLKREG(0x30)
-#define S3C_PCLK_GATE		S3C_CLKREG(0x34)
-#define S3C_SCLK_GATE		S3C_CLKREG(0x38)
-#define S3C_MEM0_GATE		S3C_CLKREG(0x3C)
-
-/* CLKDIV0 */
-#define S3C6400_CLKDIV0_MFC_MASK	(0xf << 28)
-#define S3C6400_CLKDIV0_MFC_SHIFT	(28)
-#define S3C6400_CLKDIV0_JPEG_MASK	(0xf << 24)
-#define S3C6400_CLKDIV0_JPEG_SHIFT	(24)
-#define S3C6400_CLKDIV0_CAM_MASK	(0xf << 20)
-#define S3C6400_CLKDIV0_CAM_SHIFT	(20)
-#define S3C6400_CLKDIV0_SECURITY_MASK	(0x3 << 18)
-#define S3C6400_CLKDIV0_SECURITY_SHIFT	(18)
-#define S3C6400_CLKDIV0_PCLK_MASK	(0xf << 12)
-#define S3C6400_CLKDIV0_PCLK_SHIFT	(12)
-#define S3C6400_CLKDIV0_HCLK2_MASK	(0x7 << 9)
-#define S3C6400_CLKDIV0_HCLK2_SHIFT	(9)
-#define S3C6400_CLKDIV0_HCLK_MASK	(0x1 << 8)
-#define S3C6400_CLKDIV0_HCLK_SHIFT	(8)
-#define S3C6400_CLKDIV0_MPLL_MASK	(0x1 << 4)
-#define S3C6400_CLKDIV0_MPLL_SHIFT	(4)
-#define S3C6400_CLKDIV0_ARM_MASK	(0x7 << 0)
-#define S3C6410_CLKDIV0_ARM_MASK	(0xf << 0)
-#define S3C6400_CLKDIV0_ARM_SHIFT	(0)
-
-/* CLKDIV1 */
-#define S3C6410_CLKDIV1_FIMC_MASK	(0xf << 24)
-#define S3C6410_CLKDIV1_FIMC_SHIFT	(24)
-#define S3C6400_CLKDIV1_UHOST_MASK	(0xf << 20)
-#define S3C6400_CLKDIV1_UHOST_SHIFT	(20)
-#define S3C6400_CLKDIV1_SCALER_MASK	(0xf << 16)
-#define S3C6400_CLKDIV1_SCALER_SHIFT	(16)
-#define S3C6400_CLKDIV1_LCD_MASK	(0xf << 12)
-#define S3C6400_CLKDIV1_LCD_SHIFT	(12)
-#define S3C6400_CLKDIV1_MMC2_MASK	(0xf << 8)
-#define S3C6400_CLKDIV1_MMC2_SHIFT	(8)
-#define S3C6400_CLKDIV1_MMC1_MASK	(0xf << 4)
-#define S3C6400_CLKDIV1_MMC1_SHIFT	(4)
-#define S3C6400_CLKDIV1_MMC0_MASK	(0xf << 0)
-#define S3C6400_CLKDIV1_MMC0_SHIFT	(0)
-
-/* CLKDIV2 */
-#define S3C6410_CLKDIV2_AUDIO2_MASK	(0xf << 24)
-#define S3C6410_CLKDIV2_AUDIO2_SHIFT	(24)
-#define S3C6400_CLKDIV2_IRDA_MASK	(0xf << 20)
-#define S3C6400_CLKDIV2_IRDA_SHIFT	(20)
-#define S3C6400_CLKDIV2_UART_MASK	(0xf << 16)
-#define S3C6400_CLKDIV2_UART_SHIFT	(16)
-#define S3C6400_CLKDIV2_AUDIO1_MASK	(0xf << 12)
-#define S3C6400_CLKDIV2_AUDIO1_SHIFT	(12)
-#define S3C6400_CLKDIV2_AUDIO0_MASK	(0xf << 8)
-#define S3C6400_CLKDIV2_AUDIO0_SHIFT	(8)
-#define S3C6400_CLKDIV2_SPI1_MASK	(0xf << 4)
-#define S3C6400_CLKDIV2_SPI1_SHIFT	(4)
-#define S3C6400_CLKDIV2_SPI0_MASK	(0xf << 0)
-#define S3C6400_CLKDIV2_SPI0_SHIFT	(0)
-
-/* HCLK GATE Registers */
-#define S3C_CLKCON_HCLK_3DSE	(1<<31)
-#define S3C_CLKCON_HCLK_UHOST	(1<<29)
-#define S3C_CLKCON_HCLK_SECUR	(1<<28)
-#define S3C_CLKCON_HCLK_SDMA1	(1<<27)
-#define S3C_CLKCON_HCLK_SDMA0	(1<<26)
-#define S3C_CLKCON_HCLK_IROM	(1<<25)
-#define S3C_CLKCON_HCLK_DDR1	(1<<24)
-#define S3C_CLKCON_HCLK_DDR0	(1<<23)
-#define S3C_CLKCON_HCLK_MEM1	(1<<22)
-#define S3C_CLKCON_HCLK_MEM0	(1<<21)
-#define S3C_CLKCON_HCLK_USB	(1<<20)
-#define S3C_CLKCON_HCLK_HSMMC2	(1<<19)
-#define S3C_CLKCON_HCLK_HSMMC1	(1<<18)
-#define S3C_CLKCON_HCLK_HSMMC0	(1<<17)
-#define S3C_CLKCON_HCLK_MDP	(1<<16)
-#define S3C_CLKCON_HCLK_DHOST	(1<<15)
-#define S3C_CLKCON_HCLK_IHOST	(1<<14)
-#define S3C_CLKCON_HCLK_DMA1	(1<<13)
-#define S3C_CLKCON_HCLK_DMA0	(1<<12)
-#define S3C_CLKCON_HCLK_JPEG	(1<<11)
-#define S3C_CLKCON_HCLK_CAMIF	(1<<10)
-#define S3C_CLKCON_HCLK_SCALER	(1<<9)
-#define S3C_CLKCON_HCLK_2D	(1<<8)
-#define S3C_CLKCON_HCLK_TV	(1<<7)
-#define S3C_CLKCON_HCLK_POST0	(1<<5)
-#define S3C_CLKCON_HCLK_ROT	(1<<4)
-#define S3C_CLKCON_HCLK_LCD	(1<<3)
-#define S3C_CLKCON_HCLK_TZIC	(1<<2)
-#define S3C_CLKCON_HCLK_INTC	(1<<1)
-#define S3C_CLKCON_HCLK_MFC	(1<<0)
-
-/* PCLK GATE Registers */
-#define S3C6410_CLKCON_PCLK_I2C1	(1<<27)
-#define S3C6410_CLKCON_PCLK_IIS2	(1<<26)
-#define S3C_CLKCON_PCLK_SKEY		(1<<24)
-#define S3C_CLKCON_PCLK_CHIPID		(1<<23)
-#define S3C_CLKCON_PCLK_SPI1		(1<<22)
-#define S3C_CLKCON_PCLK_SPI0		(1<<21)
-#define S3C_CLKCON_PCLK_HSIRX		(1<<20)
-#define S3C_CLKCON_PCLK_HSITX		(1<<19)
-#define S3C_CLKCON_PCLK_GPIO		(1<<18)
-#define S3C_CLKCON_PCLK_IIC		(1<<17)
-#define S3C_CLKCON_PCLK_IIS1		(1<<16)
-#define S3C_CLKCON_PCLK_IIS0		(1<<15)
-#define S3C_CLKCON_PCLK_AC97		(1<<14)
-#define S3C_CLKCON_PCLK_TZPC		(1<<13)
-#define S3C_CLKCON_PCLK_TSADC		(1<<12)
-#define S3C_CLKCON_PCLK_KEYPAD		(1<<11)
-#define S3C_CLKCON_PCLK_IRDA		(1<<10)
-#define S3C_CLKCON_PCLK_PCM1		(1<<9)
-#define S3C_CLKCON_PCLK_PCM0		(1<<8)
-#define S3C_CLKCON_PCLK_PWM		(1<<7)
-#define S3C_CLKCON_PCLK_RTC		(1<<6)
-#define S3C_CLKCON_PCLK_WDT		(1<<5)
-#define S3C_CLKCON_PCLK_UART3		(1<<4)
-#define S3C_CLKCON_PCLK_UART2		(1<<3)
-#define S3C_CLKCON_PCLK_UART1		(1<<2)
-#define S3C_CLKCON_PCLK_UART0		(1<<1)
-#define S3C_CLKCON_PCLK_MFC		(1<<0)
-
-/* SCLK GATE Registers */
-#define S3C_CLKCON_SCLK_UHOST		(1<<30)
-#define S3C_CLKCON_SCLK_MMC2_48		(1<<29)
-#define S3C_CLKCON_SCLK_MMC1_48		(1<<28)
-#define S3C_CLKCON_SCLK_MMC0_48		(1<<27)
-#define S3C_CLKCON_SCLK_MMC2		(1<<26)
-#define S3C_CLKCON_SCLK_MMC1		(1<<25)
-#define S3C_CLKCON_SCLK_MMC0		(1<<24)
-#define S3C_CLKCON_SCLK_SPI1_48 	(1<<23)
-#define S3C_CLKCON_SCLK_SPI0_48 	(1<<22)
-#define S3C_CLKCON_SCLK_SPI1		(1<<21)
-#define S3C_CLKCON_SCLK_SPI0		(1<<20)
-#define S3C_CLKCON_SCLK_DAC27		(1<<19)
-#define S3C_CLKCON_SCLK_TV27		(1<<18)
-#define S3C_CLKCON_SCLK_SCALER27	(1<<17)
-#define S3C_CLKCON_SCLK_SCALER		(1<<16)
-#define S3C_CLKCON_SCLK_LCD27		(1<<15)
-#define S3C_CLKCON_SCLK_LCD		(1<<14)
-#define S3C6400_CLKCON_SCLK_POST1_27	(1<<13)
-#define S3C6410_CLKCON_FIMC		(1<<13)
-#define S3C_CLKCON_SCLK_POST0_27	(1<<12)
-#define S3C6400_CLKCON_SCLK_POST1	(1<<11)
-#define S3C6410_CLKCON_SCLK_AUDIO2	(1<<11)
-#define S3C_CLKCON_SCLK_POST0		(1<<10)
-#define S3C_CLKCON_SCLK_AUDIO1		(1<<9)
-#define S3C_CLKCON_SCLK_AUDIO0		(1<<8)
-#define S3C_CLKCON_SCLK_SECUR		(1<<7)
-#define S3C_CLKCON_SCLK_IRDA		(1<<6)
-#define S3C_CLKCON_SCLK_UART		(1<<5)
-#define S3C_CLKCON_SCLK_ONENAND 	(1<<4)
-#define S3C_CLKCON_SCLK_MFC		(1<<3)
-#define S3C_CLKCON_SCLK_CAM		(1<<2)
-#define S3C_CLKCON_SCLK_JPEG		(1<<1)
-
-/* CLKSRC */
-
-#define S3C6400_CLKSRC_APLL_MOUT	(1 << 0)
-#define S3C6400_CLKSRC_MPLL_MOUT	(1 << 1)
-#define S3C6400_CLKSRC_EPLL_MOUT	(1 << 2)
-#define S3C6400_CLKSRC_APLL_MOUT_SHIFT	(0)
-#define S3C6400_CLKSRC_MPLL_MOUT_SHIFT	(1)
-#define S3C6400_CLKSRC_EPLL_MOUT_SHIFT	(2)
-#define S3C6400_CLKSRC_MFC		(1 << 4)
-
-#define S3C6410_CLKSRC_TV27_MASK	(0x1 << 31)
-#define S3C6410_CLKSRC_TV27_SHIFT	(31)
-#define S3C6410_CLKSRC_DAC27_MASK	(0x1 << 30)
-#define S3C6410_CLKSRC_DAC27_SHIFT	(30)
-#define S3C6400_CLKSRC_SCALER_MASK	(0x3 << 28)
-#define S3C6400_CLKSRC_SCALER_SHIFT	(28)
-#define S3C6400_CLKSRC_LCD_MASK		(0x3 << 26)
-#define S3C6400_CLKSRC_LCD_SHIFT	(26)
-#define S3C6400_CLKSRC_IRDA_MASK	(0x3 << 24)
-#define S3C6400_CLKSRC_IRDA_SHIFT	(24)
-#define S3C6400_CLKSRC_MMC2_MASK	(0x3 << 22)
-#define S3C6400_CLKSRC_MMC2_SHIFT	(22)
-#define S3C6400_CLKSRC_MMC1_MASK	(0x3 << 20)
-#define S3C6400_CLKSRC_MMC1_SHIFT	(20)
-#define S3C6400_CLKSRC_MMC0_MASK	(0x3 << 18)
-#define S3C6400_CLKSRC_MMC0_SHIFT	(18)
-#define S3C6400_CLKSRC_SPI1_MASK	(0x3 << 16)
-#define S3C6400_CLKSRC_SPI1_SHIFT	(16)
-#define S3C6400_CLKSRC_SPI0_MASK	(0x3 << 14)
-#define S3C6400_CLKSRC_SPI0_SHIFT	(14)
-#define S3C6400_CLKSRC_UART_MASK	(0x1 << 13)
-#define S3C6400_CLKSRC_UART_SHIFT	(13)
-#define S3C6400_CLKSRC_AUDIO1_MASK	(0x7 << 10)
-#define S3C6400_CLKSRC_AUDIO1_SHIFT	(10)
-#define S3C6400_CLKSRC_AUDIO0_MASK	(0x7 << 7)
-#define S3C6400_CLKSRC_AUDIO0_SHIFT	(7)
-#define S3C6400_CLKSRC_UHOST_MASK	(0x3 << 5)
-#define S3C6400_CLKSRC_UHOST_SHIFT	(5)
-
-
-#endif /* _PLAT_REGS_CLOCK_H */
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-gpio-memport.h b/arch/arm/plat-s3c64xx/include/plat/regs-gpio-memport.h
deleted file mode 100644
index 82342f6fd27d..000000000000
--- a/arch/arm/plat-s3c64xx/include/plat/regs-gpio-memport.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/include/mach/regs-gpio-memport.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C64XX - GPIO memory port register definitions
- */
-
-#ifndef __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H
-#define __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H __FILE__
-
-#define S3C64XX_MEM0CONSTOP	S3C64XX_GPIOREG(0x1B0)
-#define S3C64XX_MEM1CONSTOP	S3C64XX_GPIOREG(0x1B4)
-
-#define S3C64XX_MEM0CONSLP0	S3C64XX_GPIOREG(0x1C0)
-#define S3C64XX_MEM0CONSLP1	S3C64XX_GPIOREG(0x1C4)
-#define S3C64XX_MEM1CONSLP	S3C64XX_GPIOREG(0x1C8)
-
-#define S3C64XX_MEM0DRVCON	S3C64XX_GPIOREG(0x1D0)
-#define S3C64XX_MEM1DRVCON	S3C64XX_GPIOREG(0x1D4)
-
-#endif /* __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H */
-
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h b/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h
deleted file mode 100644
index 81f7f6e6832e..000000000000
--- a/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h
+++ /dev/null
@@ -1,187 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/include/mach/regs-gpio.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C64XX - GPIO register definitions
- */
-
-#ifndef __ASM_PLAT_S3C64XX_REGS_GPIO_H
-#define __ASM_PLAT_S3C64XX_REGS_GPIO_H __FILE__
-
-/* Base addresses for each of the banks */
-
-#define S3C64XX_GPIOREG(reg)	(S3C64XX_VA_GPIO + (reg))
-
-#define S3C64XX_GPA_BASE	S3C64XX_GPIOREG(0x0000)
-#define S3C64XX_GPB_BASE	S3C64XX_GPIOREG(0x0020)
-#define S3C64XX_GPC_BASE	S3C64XX_GPIOREG(0x0040)
-#define S3C64XX_GPD_BASE	S3C64XX_GPIOREG(0x0060)
-#define S3C64XX_GPE_BASE	S3C64XX_GPIOREG(0x0080)
-#define S3C64XX_GPF_BASE	S3C64XX_GPIOREG(0x00A0)
-#define S3C64XX_GPG_BASE	S3C64XX_GPIOREG(0x00C0)
-#define S3C64XX_GPH_BASE	S3C64XX_GPIOREG(0x00E0)
-#define S3C64XX_GPI_BASE	S3C64XX_GPIOREG(0x0100)
-#define S3C64XX_GPJ_BASE	S3C64XX_GPIOREG(0x0120)
-#define S3C64XX_GPK_BASE	S3C64XX_GPIOREG(0x0800)
-#define S3C64XX_GPL_BASE	S3C64XX_GPIOREG(0x0810)
-#define S3C64XX_GPM_BASE	S3C64XX_GPIOREG(0x0820)
-#define S3C64XX_GPN_BASE	S3C64XX_GPIOREG(0x0830)
-#define S3C64XX_GPO_BASE	S3C64XX_GPIOREG(0x0140)
-#define S3C64XX_GPP_BASE	S3C64XX_GPIOREG(0x0160)
-#define S3C64XX_GPQ_BASE	S3C64XX_GPIOREG(0x0180)
-
-/* SPCON */
-
-#define S3C64XX_SPCON		S3C64XX_GPIOREG(0x1A0)
-
-#define S3C64XX_SPCON_DRVCON_CAM_MASK		(0x3 << 30)
-#define S3C64XX_SPCON_DRVCON_CAM_SHIFT		(30)
-#define S3C64XX_SPCON_DRVCON_CAM_2mA		(0x0 << 30)
-#define S3C64XX_SPCON_DRVCON_CAM_4mA		(0x1 << 30)
-#define S3C64XX_SPCON_DRVCON_CAM_7mA		(0x2 << 30)
-#define S3C64XX_SPCON_DRVCON_CAM_9mA		(0x3 << 30)
-
-#define S3C64XX_SPCON_DRVCON_HSSPI_MASK		(0x3 << 28)
-#define S3C64XX_SPCON_DRVCON_HSSPI_SHIFT	(28)
-#define S3C64XX_SPCON_DRVCON_HSSPI_2mA		(0x0 << 28)
-#define S3C64XX_SPCON_DRVCON_HSSPI_4mA		(0x1 << 28)
-#define S3C64XX_SPCON_DRVCON_HSSPI_7mA		(0x2 << 28)
-#define S3C64XX_SPCON_DRVCON_HSSPI_9mA		(0x3 << 28)
-
-#define S3C64XX_SPCON_DRVCON_HSMMC_MASK		(0x3 << 26)
-#define S3C64XX_SPCON_DRVCON_HSMMC_SHIFT	(26)
-#define S3C64XX_SPCON_DRVCON_HSMMC_2mA		(0x0 << 26)
-#define S3C64XX_SPCON_DRVCON_HSMMC_4mA		(0x1 << 26)
-#define S3C64XX_SPCON_DRVCON_HSMMC_7mA		(0x2 << 26)
-#define S3C64XX_SPCON_DRVCON_HSMMC_9mA		(0x3 << 26)
-
-#define S3C64XX_SPCON_DRVCON_LCD_MASK		(0x3 << 24)
-#define S3C64XX_SPCON_DRVCON_LCD_SHIFT		(24)
-#define S3C64XX_SPCON_DRVCON_LCD_2mA		(0x0 << 24)
-#define S3C64XX_SPCON_DRVCON_LCD_4mA		(0x1 << 24)
-#define S3C64XX_SPCON_DRVCON_LCD_7mA		(0x2 << 24)
-#define S3C64XX_SPCON_DRVCON_LCD_9mA		(0x3 << 24)
-
-#define S3C64XX_SPCON_DRVCON_MODEM_MASK		(0x3 << 22)
-#define S3C64XX_SPCON_DRVCON_MODEM_SHIFT	(22)
-#define S3C64XX_SPCON_DRVCON_MODEM_2mA		(0x0 << 22)
-#define S3C64XX_SPCON_DRVCON_MODEM_4mA		(0x1 << 22)
-#define S3C64XX_SPCON_DRVCON_MODEM_7mA		(0x2 << 22)
-#define S3C64XX_SPCON_DRVCON_MODEM_9mA		(0x3 << 22)
-
-#define S3C64XX_SPCON_nRSTOUT_OEN		(1 << 21)
-
-#define S3C64XX_SPCON_DRVCON_SPICLK1_MASK	(0x3 << 18)
-#define S3C64XX_SPCON_DRVCON_SPICLK1_SHIFT	(18)
-#define S3C64XX_SPCON_DRVCON_SPICLK1_2mA	(0x0 << 18)
-#define S3C64XX_SPCON_DRVCON_SPICLK1_4mA	(0x1 << 18)
-#define S3C64XX_SPCON_DRVCON_SPICLK1_7mA	(0x2 << 18)
-#define S3C64XX_SPCON_DRVCON_SPICLK1_9mA	(0x3 << 18)
-
-#define S3C64XX_SPCON_MEM1_DQS_PUD_MASK		(0x3 << 16)
-#define S3C64XX_SPCON_MEM1_DQS_PUD_SHIFT	(16)
-#define S3C64XX_SPCON_MEM1_DQS_PUD_DISABLED	(0x0 << 16)
-#define S3C64XX_SPCON_MEM1_DQS_PUD_DOWN		(0x1 << 16)
-#define S3C64XX_SPCON_MEM1_DQS_PUD_UP		(0x2 << 16)
-
-#define S3C64XX_SPCON_MEM1_D_PUD1_MASK		(0x3 << 14)
-#define S3C64XX_SPCON_MEM1_D_PUD1_SHIFT		(14)
-#define S3C64XX_SPCON_MEM1_D_PUD1_DISABLED	(0x0 << 14)
-#define S3C64XX_SPCON_MEM1_D_PUD1_DOWN		(0x1 << 14)
-#define S3C64XX_SPCON_MEM1_D_PUD1_UP		(0x2 << 14)
-
-#define S3C64XX_SPCON_MEM1_D_PUD0_MASK		(0x3 << 12)
-#define S3C64XX_SPCON_MEM1_D_PUD0_SHIFT		(12)
-#define S3C64XX_SPCON_MEM1_D_PUD0_DISABLED	(0x0 << 12)
-#define S3C64XX_SPCON_MEM1_D_PUD0_DOWN		(0x1 << 12)
-#define S3C64XX_SPCON_MEM1_D_PUD0_UP		(0x2 << 12)
-
-#define S3C64XX_SPCON_MEM0_D_PUD_MASK		(0x3 << 8)
-#define S3C64XX_SPCON_MEM0_D_PUD_SHIFT		(8)
-#define S3C64XX_SPCON_MEM0_D_PUD_DISABLED	(0x0 << 8)
-#define S3C64XX_SPCON_MEM0_D_PUD_DOWN		(0x1 << 8)
-#define S3C64XX_SPCON_MEM0_D_PUD_UP		(0x2 << 8)
-
-#define S3C64XX_SPCON_USBH_DMPD			(1 << 7)
-#define S3C64XX_SPCON_USBH_DPPD			(1 << 6)
-#define S3C64XX_SPCON_USBH_PUSW2		(1 << 5)
-#define S3C64XX_SPCON_USBH_PUSW1		(1 << 4)
-#define S3C64XX_SPCON_USBH_SUSPND		(1 << 3)
-
-#define S3C64XX_SPCON_LCD_SEL_MASK		(0x3 << 0)
-#define S3C64XX_SPCON_LCD_SEL_SHIFT		(0)
-#define S3C64XX_SPCON_LCD_SEL_HOST		(0x0 << 0)
-#define S3C64XX_SPCON_LCD_SEL_RGB		(0x1 << 0)
-#define S3C64XX_SPCON_LCD_SEL_606_656		(0x2 << 0)
-
-
-/* External interrupt registers */
-
-#define S3C64XX_EINT12CON	S3C64XX_GPIOREG(0x200)
-#define S3C64XX_EINT34CON	S3C64XX_GPIOREG(0x204)
-#define S3C64XX_EINT56CON	S3C64XX_GPIOREG(0x208)
-#define S3C64XX_EINT78CON	S3C64XX_GPIOREG(0x20C)
-#define S3C64XX_EINT9CON	S3C64XX_GPIOREG(0x210)
-
-#define S3C64XX_EINT12FLTCON	S3C64XX_GPIOREG(0x220)
-#define S3C64XX_EINT34FLTCON	S3C64XX_GPIOREG(0x224)
-#define S3C64XX_EINT56FLTCON	S3C64XX_GPIOREG(0x228)
-#define S3C64XX_EINT78FLTCON	S3C64XX_GPIOREG(0x22C)
-#define S3C64XX_EINT9FLTCON	S3C64XX_GPIOREG(0x230)
-
-#define S3C64XX_EINT12MASK	S3C64XX_GPIOREG(0x240)
-#define S3C64XX_EINT34MASK	S3C64XX_GPIOREG(0x244)
-#define S3C64XX_EINT56MASK	S3C64XX_GPIOREG(0x248)
-#define S3C64XX_EINT78MASK	S3C64XX_GPIOREG(0x24C)
-#define S3C64XX_EINT9MASK	S3C64XX_GPIOREG(0x250)
-
-#define S3C64XX_EINT12PEND	S3C64XX_GPIOREG(0x260)
-#define S3C64XX_EINT34PEND	S3C64XX_GPIOREG(0x264)
-#define S3C64XX_EINT56PEND	S3C64XX_GPIOREG(0x268)
-#define S3C64XX_EINT78PEND	S3C64XX_GPIOREG(0x26C)
-#define S3C64XX_EINT9PEND	S3C64XX_GPIOREG(0x270)
-
-#define S3C64XX_PRIORITY	S3C64XX_GPIOREG(0x280)
-#define S3C64XX_PRIORITY_ARB(x)	(1 << (x))
-
-#define S3C64XX_SERVICE		S3C64XX_GPIOREG(0x284)
-#define S3C64XX_SERVICEPEND	S3C64XX_GPIOREG(0x288)
-
-#define S3C64XX_EINT0CON0	S3C64XX_GPIOREG(0x900)
-#define S3C64XX_EINT0CON1	S3C64XX_GPIOREG(0x904)
-#define S3C64XX_EINT0FLTCON0	S3C64XX_GPIOREG(0x910)
-#define S3C64XX_EINT0FLTCON1	S3C64XX_GPIOREG(0x914)
-#define S3C64XX_EINT0FLTCON2	S3C64XX_GPIOREG(0x918)
-#define S3C64XX_EINT0FLTCON3	S3C64XX_GPIOREG(0x91C)
-
-#define S3C64XX_EINT0MASK	S3C64XX_GPIOREG(0x920)
-#define S3C64XX_EINT0PEND	S3C64XX_GPIOREG(0x924)
-
-/* GPIO sleep configuration */
-
-#define S3C64XX_SPCONSLP	S3C64XX_GPIOREG(0x880)
-
-#define S3C64XX_SPCONSLP_TDO_PULLDOWN	(1 << 14)
-#define S3C64XX_SPCONSLP_CKE1INIT	(1 << 5)
-
-#define S3C64XX_SPCONSLP_RSTOUT_MASK	(0x3 << 12)
-#define S3C64XX_SPCONSLP_RSTOUT_OUT0	(0x0 << 12)
-#define S3C64XX_SPCONSLP_RSTOUT_OUT1	(0x1 << 12)
-#define S3C64XX_SPCONSLP_RSTOUT_HIZ	(0x2 << 12)
-
-#define S3C64XX_SPCONSLP_KPCOL_MASK	(0x3 << 0)
-#define S3C64XX_SPCONSLP_KPCOL_OUT0	(0x0 << 0)
-#define S3C64XX_SPCONSLP_KPCOL_OUT1	(0x1 << 0)
-#define S3C64XX_SPCONSLP_KPCOL_INP	(0x2 << 0)
-
-
-#define S3C64XX_SLPEN		S3C64XX_GPIOREG(0x930)
-
-#define S3C64XX_SLPEN_USE_xSLP		(1 << 0)
-#define S3C64XX_SLPEN_CFG_BYSLPEN	(1 << 1)
-
-#endif /* __ASM_PLAT_S3C64XX_REGS_GPIO_H */
-
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-modem.h b/arch/arm/plat-s3c64xx/include/plat/regs-modem.h
deleted file mode 100644
index 49f7759dedfa..000000000000
--- a/arch/arm/plat-s3c64xx/include/plat/regs-modem.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* arch/arm/plat-s3c64xx/include/plat/regs-modem.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      http://armlinux.simtec.co.uk/
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * S3C64XX - modem block registers
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_S3C64XX_REGS_MODEM_H
-#define __PLAT_S3C64XX_REGS_MODEM_H __FILE__
-
-#define S3C64XX_MODEMREG(x)	(S3C64XX_VA_MODEM + (x))
-
-#define S3C64XX_MODEM_INT2AP			S3C64XX_MODEMREG(0x0)
-#define S3C64XX_MODEM_INT2MODEM			S3C64XX_MODEMREG(0x4)
-#define S3C64XX_MODEM_MIFCON			S3C64XX_MODEMREG(0x8)
-#define S3C64XX_MODEM_MIFPCON			S3C64XX_MODEMREG(0xC)
-#define S3C64XX_MODEM_INTCLR			S3C64XX_MODEMREG(0x10)
-#define S3C64XX_MODEM_DMA_TXADDR		S3C64XX_MODEMREG(0x14)
-#define S3C64XX_MODEM_DMA_RXADDR		S3C64XX_MODEMREG(0x18)
-
-#define MIFPCON_INT2M_LEVEL			(1 << 4)
-#define MIFPCON_LCD_BYPASS			(1 << 3)
-
-#endif /* __PLAT_S3C64XX_REGS_MODEM_H */
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-sys.h b/arch/arm/plat-s3c64xx/include/plat/regs-sys.h
deleted file mode 100644
index 69b78d9f83b8..000000000000
--- a/arch/arm/plat-s3c64xx/include/plat/regs-sys.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* arch/arm/plat-s3c64xx/include/plat/regs-sys.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C64XX system register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_REGS_SYS_H
-#define __PLAT_REGS_SYS_H __FILE__
-
-#define S3C_SYSREG(x)		(S3C_VA_SYS + (x))
-
-#define S3C64XX_AHB_CON0	S3C_SYSREG(0x100)
-#define S3C64XX_AHB_CON1	S3C_SYSREG(0x104)
-#define S3C64XX_AHB_CON2	S3C_SYSREG(0x108)
-
-#define S3C64XX_OTHERS		S3C_SYSREG(0x900)
-
-#define S3C64XX_OTHERS_USBMASK	(1 << 16)
-
-#endif /* _PLAT_REGS_SYS_H */
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h b/arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h
deleted file mode 100644
index 270d96ac9705..000000000000
--- a/arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/* arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      http://armlinux.simtec.co.uk/
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * S3C64XX - syscon power and sleep control registers
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_S3C64XX_REGS_SYSCON_POWER_H
-#define __PLAT_S3C64XX_REGS_SYSCON_POWER_H __FILE__
-
-#define S3C64XX_PWR_CFG				S3C_SYSREG(0x804)
-
-#define S3C64XX_PWRCFG_OSC_OTG_DISABLE		(1 << 17)
-#define S3C64XX_PWRCFG_MMC2_DISABLE		(1 << 16)
-#define S3C64XX_PWRCFG_MMC1_DISABLE		(1 << 15)
-#define S3C64XX_PWRCFG_MMC0_DISABLE		(1 << 14)
-#define S3C64XX_PWRCFG_HSI_DISABLE		(1 << 13)
-#define S3C64XX_PWRCFG_TS_DISABLE		(1 << 12)
-#define S3C64XX_PWRCFG_RTC_TICK_DISABLE		(1 << 11)
-#define S3C64XX_PWRCFG_RTC_ALARM_DISABLE	(1 << 10)
-#define S3C64XX_PWRCFG_MSM_DISABLE		(1 << 9)
-#define S3C64XX_PWRCFG_KEY_DISABLE		(1 << 8)
-#define S3C64XX_PWRCFG_BATF_DISABLE		(1 << 7)
-
-#define S3C64XX_PWRCFG_CFG_WFI_MASK		(0x3 << 5)
-#define S3C64XX_PWRCFG_CFG_WFI_SHIFT		(5)
-#define S3C64XX_PWRCFG_CFG_WFI_IGNORE		(0x0 << 5)
-#define S3C64XX_PWRCFG_CFG_WFI_IDLE		(0x1 << 5)
-#define S3C64XX_PWRCFG_CFG_WFI_STOP		(0x2 << 5)
-#define S3C64XX_PWRCFG_CFG_WFI_SLEEP		(0x3 << 5)
-
-#define S3C64XX_PWRCFG_CFG_BATFLT_MASK		(0x3 << 3)
-#define S3C64XX_PWRCFG_CFG_BATFLT_SHIFT		(3)
-#define S3C64XX_PWRCFG_CFG_BATFLT_IGNORE	(0x0 << 3)
-#define S3C64XX_PWRCFG_CFG_BATFLT_IRQ		(0x1 << 3)
-#define S3C64XX_PWRCFG_CFG_BATFLT_SLEEP		(0x3 << 3)
-
-#define S3C64XX_PWRCFG_CFG_BAT_WAKE		(1 << 2)
-#define S3C64XX_PWRCFG_OSC27_EN			(1 << 0)
-
-#define S3C64XX_EINT_MASK			S3C_SYSREG(0x808)
-
-#define S3C64XX_NORMAL_CFG			S3C_SYSREG(0x810)
-
-#define S3C64XX_NORMALCFG_IROM_ON		(1 << 30)
-#define S3C64XX_NORMALCFG_DOMAIN_ETM_ON		(1 << 16)
-#define S3C64XX_NORMALCFG_DOMAIN_S_ON		(1 << 15)
-#define S3C64XX_NORMALCFG_DOMAIN_F_ON		(1 << 14)
-#define S3C64XX_NORMALCFG_DOMAIN_P_ON		(1 << 13)
-#define S3C64XX_NORMALCFG_DOMAIN_I_ON		(1 << 12)
-#define S3C64XX_NORMALCFG_DOMAIN_G_ON		(1 << 10)
-#define S3C64XX_NORMALCFG_DOMAIN_V_ON		(1 << 9)
-
-#define S3C64XX_STOP_CFG			S3C_SYSREG(0x814)
-
-#define S3C64XX_STOPCFG_MEMORY_ARM_ON		(1 << 29)
-#define S3C64XX_STOPCFG_TOP_MEMORY_ON		(1 << 20)
-#define S3C64XX_STOPCFG_ARM_LOGIC_ON		(1 << 17)
-#define S3C64XX_STOPCFG_TOP_LOGIC_ON		(1 << 8)
-#define S3C64XX_STOPCFG_OSC_EN			(1 << 0)
-
-#define S3C64XX_SLEEP_CFG			S3C_SYSREG(0x818)
-
-#define S3C64XX_SLEEPCFG_OSC_EN			(1 << 0)
-
-#define S3C64XX_STOP_MEM_CFG			S3C_SYSREG(0x81c)
-
-#define S3C64XX_STOPMEMCFG_MODEMIF_RETAIN	(1 << 6)
-#define S3C64XX_STOPMEMCFG_HOSTIF_RETAIN	(1 << 5)
-#define S3C64XX_STOPMEMCFG_OTG_RETAIN		(1 << 4)
-#define S3C64XX_STOPMEMCFG_HSMCC_RETAIN		(1 << 3)
-#define S3C64XX_STOPMEMCFG_IROM_RETAIN		(1 << 2)
-#define S3C64XX_STOPMEMCFG_IRDA_RETAIN		(1 << 1)
-#define S3C64XX_STOPMEMCFG_NFCON_RETAIN		(1 << 0)
-
-#define S3C64XX_OSC_STABLE			S3C_SYSREG(0x824)
-#define S3C64XX_PWR_STABLE			S3C_SYSREG(0x828)
-
-#define S3C64XX_WAKEUP_STAT			S3C_SYSREG(0x908)
-
-#define S3C64XX_WAKEUPSTAT_MMC2			(1 << 11)
-#define S3C64XX_WAKEUPSTAT_MMC1			(1 << 10)
-#define S3C64XX_WAKEUPSTAT_MMC0			(1 << 9)
-#define S3C64XX_WAKEUPSTAT_HSI			(1 << 8)
-#define S3C64XX_WAKEUPSTAT_BATFLT		(1 << 6)
-#define S3C64XX_WAKEUPSTAT_MSM			(1 << 5)
-#define S3C64XX_WAKEUPSTAT_KEY			(1 << 4)
-#define S3C64XX_WAKEUPSTAT_TS			(1 << 3)
-#define S3C64XX_WAKEUPSTAT_RTC_TICK		(1 << 2)
-#define S3C64XX_WAKEUPSTAT_RTC_ALARM		(1 << 1)
-#define S3C64XX_WAKEUPSTAT_EINT			(1 << 0)
-
-#define S3C64XX_BLK_PWR_STAT			S3C_SYSREG(0x90c)
-
-#define S3C64XX_BLKPWRSTAT_G			(1 << 7)
-#define S3C64XX_BLKPWRSTAT_ETM			(1 << 6)
-#define S3C64XX_BLKPWRSTAT_S			(1 << 5)
-#define S3C64XX_BLKPWRSTAT_F			(1 << 4)
-#define S3C64XX_BLKPWRSTAT_P			(1 << 3)
-#define S3C64XX_BLKPWRSTAT_I			(1 << 2)
-#define S3C64XX_BLKPWRSTAT_V			(1 << 1)
-#define S3C64XX_BLKPWRSTAT_TOP			(1 << 0)
-
-#define S3C64XX_INFORM0				S3C_SYSREG(0xA00)
-#define S3C64XX_INFORM1				S3C_SYSREG(0xA04)
-#define S3C64XX_INFORM2				S3C_SYSREG(0xA08)
-#define S3C64XX_INFORM3				S3C_SYSREG(0xA0C)
-
-#endif /* __PLAT_S3C64XX_REGS_SYSCON_POWER_H */
diff --git a/arch/arm/plat-s3c64xx/include/plat/s3c6400.h b/arch/arm/plat-s3c64xx/include/plat/s3c6400.h
deleted file mode 100644
index 11f2e1e119b0..000000000000
--- a/arch/arm/plat-s3c64xx/include/plat/s3c6400.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* arch/arm/plat-s3c64xx/include/plat/s3c6400.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * Header file for s3c6400 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Common init code for S3C6400 related SoCs */
-
-extern void s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s3c6400_register_clocks(unsigned armclk_divlimit);
-extern void s3c6400_setup_clocks(void);
-
-#ifdef CONFIG_CPU_S3C6400
-
-extern  int s3c6400_init(void);
-extern void s3c6400_init_irq(void);
-extern void s3c6400_map_io(void);
-extern void s3c6400_init_clocks(int xtal);
-
-#define s3c6400_init_uarts s3c6400_common_init_uarts
-
-#else
-#define s3c6400_init_clocks NULL
-#define s3c6400_init_uarts NULL
-#define s3c6400_map_io NULL
-#define s3c6400_init NULL
-#endif
-
diff --git a/arch/arm/plat-s3c64xx/include/plat/s3c6410.h b/arch/arm/plat-s3c64xx/include/plat/s3c6410.h
deleted file mode 100644
index 50dcdd6f6800..000000000000
--- a/arch/arm/plat-s3c64xx/include/plat/s3c6410.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* arch/arm/plat-s3c64xx/include/plat/s3c6410.h
- *
- * Copyright 2008 Openmoko,  Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * Header file for s3c6410 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C6410
-
-extern  int s3c6410_init(void);
-extern void s3c6410_init_irq(void);
-extern void s3c6410_map_io(void);
-extern void s3c6410_init_clocks(int xtal);
-
-#define s3c6410_init_uarts s3c6400_common_init_uarts
-
-#else
-#define s3c6410_init_clocks NULL
-#define s3c6410_init_uarts NULL
-#define s3c6410_map_io NULL
-#define s3c6410_init NULL
-#endif
diff --git a/arch/arm/plat-s3c64xx/irq-eint.c b/arch/arm/plat-s3c64xx/irq-eint.c
deleted file mode 100644
index ebdf183a0911..000000000000
--- a/arch/arm/plat-s3c64xx/irq-eint.c
+++ /dev/null
@@ -1,213 +0,0 @@
-/* arch/arm/plat-s3c64xx/irq-eint.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C64XX - Interrupt handling for IRQ_EINT(x)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/sysdev.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <asm/hardware/vic.h>
-
-#include <plat/regs-irqtype.h>
-#include <plat/regs-gpio.h>
-#include <plat/gpio-cfg.h>
-
-#include <mach/map.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-
-#define eint_offset(irq)	((irq) - IRQ_EINT(0))
-#define eint_irq_to_bit(irq)	(1 << eint_offset(irq))
-
-static inline void s3c_irq_eint_mask(unsigned int irq)
-{
-	u32 mask;
-
-	mask = __raw_readl(S3C64XX_EINT0MASK);
-	mask |= eint_irq_to_bit(irq);
-	__raw_writel(mask, S3C64XX_EINT0MASK);
-}
-
-static void s3c_irq_eint_unmask(unsigned int irq)
-{
-	u32 mask;
-
-	mask = __raw_readl(S3C64XX_EINT0MASK);
-	mask &= ~eint_irq_to_bit(irq);
-	__raw_writel(mask, S3C64XX_EINT0MASK);
-}
-
-static inline void s3c_irq_eint_ack(unsigned int irq)
-{
-	__raw_writel(eint_irq_to_bit(irq), S3C64XX_EINT0PEND);
-}
-
-static void s3c_irq_eint_maskack(unsigned int irq)
-{
-	/* compiler should in-line these */
-	s3c_irq_eint_mask(irq);
-	s3c_irq_eint_ack(irq);
-}
-
-static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
-{
-	int offs = eint_offset(irq);
-	int pin, pin_val;
-	int shift;
-	u32 ctrl, mask;
-	u32 newvalue = 0;
-	void __iomem *reg;
-
-	if (offs > 27)
-		return -EINVAL;
-
-	if (offs <= 15)
-		reg = S3C64XX_EINT0CON0;
-	else
-		reg = S3C64XX_EINT0CON1;
-
-	switch (type) {
-	case IRQ_TYPE_NONE:
-		printk(KERN_WARNING "No edge setting!\n");
-		break;
-
-	case IRQ_TYPE_EDGE_RISING:
-		newvalue = S3C2410_EXTINT_RISEEDGE;
-		break;
-
-	case IRQ_TYPE_EDGE_FALLING:
-		newvalue = S3C2410_EXTINT_FALLEDGE;
-		break;
-
-	case IRQ_TYPE_EDGE_BOTH:
-		newvalue = S3C2410_EXTINT_BOTHEDGE;
-		break;
-
-	case IRQ_TYPE_LEVEL_LOW:
-		newvalue = S3C2410_EXTINT_LOWLEV;
-		break;
-
-	case IRQ_TYPE_LEVEL_HIGH:
-		newvalue = S3C2410_EXTINT_HILEV;
-		break;
-
-	default:
-		printk(KERN_ERR "No such irq type %d", type);
-		return -1;
-	}
-
-	if (offs <= 15)
-		shift = (offs / 2) * 4;
-	else
-		shift = ((offs - 16) / 2) * 4;
-	mask = 0x7 << shift;
-
-	ctrl = __raw_readl(reg);
-	ctrl &= ~mask;
-	ctrl |= newvalue << shift;
-	__raw_writel(ctrl, reg);
-
-	/* set the GPIO pin appropriately */
-
-	if (offs < 16) {
-		pin = S3C64XX_GPN(offs);
-		pin_val = S3C_GPIO_SFN(2);
-	} else if (offs < 23) {
-		pin = S3C64XX_GPL(offs + 8 - 16);
-		pin_val = S3C_GPIO_SFN(3);
-	} else {
-		pin = S3C64XX_GPM(offs - 23);
-		pin_val = S3C_GPIO_SFN(3);
-	}
-
-	s3c_gpio_cfgpin(pin, pin_val);
-
-	return 0;
-}
-
-static struct irq_chip s3c_irq_eint = {
-	.name		= "s3c-eint",
-	.mask		= s3c_irq_eint_mask,
-	.unmask		= s3c_irq_eint_unmask,
-	.mask_ack	= s3c_irq_eint_maskack,
-	.ack		= s3c_irq_eint_ack,
-	.set_type	= s3c_irq_eint_set_type,
-	.set_wake	= s3c_irqext_wake,
-};
-
-/* s3c_irq_demux_eint
- *
- * This function demuxes the IRQ from the group0 external interrupts,
- * from IRQ_EINT(0) to IRQ_EINT(27). It is designed to be inlined into
- * the specific handlers s3c_irq_demux_eintX_Y.
- */
-static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end)
-{
-	u32 status = __raw_readl(S3C64XX_EINT0PEND);
-	u32 mask = __raw_readl(S3C64XX_EINT0MASK);
-	unsigned int irq;
-
-	status &= ~mask;
-	status >>= start;
-	status &= (1 << (end - start + 1)) - 1;
-
-	for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
-		if (status & 1)
-			generic_handle_irq(irq);
-
-		status >>= 1;
-	}
-}
-
-static void s3c_irq_demux_eint0_3(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_eint(0, 3);
-}
-
-static void s3c_irq_demux_eint4_11(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_eint(4, 11);
-}
-
-static void s3c_irq_demux_eint12_19(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_eint(12, 19);
-}
-
-static void s3c_irq_demux_eint20_27(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_eint(20, 27);
-}
-
-static int __init s3c64xx_init_irq_eint(void)
-{
-	int irq;
-
-	for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) {
-		set_irq_chip(irq, &s3c_irq_eint);
-		set_irq_handler(irq, handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	set_irq_chained_handler(IRQ_EINT0_3, s3c_irq_demux_eint0_3);
-	set_irq_chained_handler(IRQ_EINT4_11, s3c_irq_demux_eint4_11);
-	set_irq_chained_handler(IRQ_EINT12_19, s3c_irq_demux_eint12_19);
-	set_irq_chained_handler(IRQ_EINT20_27, s3c_irq_demux_eint20_27);
-
-	return 0;
-}
-
-arch_initcall(s3c64xx_init_irq_eint);
diff --git a/arch/arm/plat-s3c64xx/irq-pm.c b/arch/arm/plat-s3c64xx/irq-pm.c
deleted file mode 100644
index ca523b5d4c17..000000000000
--- a/arch/arm/plat-s3c64xx/irq-pm.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/* arch/arm/plat-s3c64xx/irq-pm.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C64XX - Interrupt handling Power Management
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/sysdev.h>
-#include <linux/interrupt.h>
-#include <linux/serial_core.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <mach/map.h>
-
-#include <plat/regs-serial.h>
-#include <plat/regs-timer.h>
-#include <plat/regs-gpio.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-
-/* We handled all the IRQ types in this code, to save having to make several
- * small files to handle each different type separately. Having the EINT_GRP
- * code here shouldn't be as much bloat as the IRQ table space needed when
- * they are enabled. The added benefit is we ensure that these registers are
- * in the same state as we suspended.
- */
-
-static struct sleep_save irq_save[] = {
-	SAVE_ITEM(S3C64XX_PRIORITY),
-	SAVE_ITEM(S3C64XX_EINT0CON0),
-	SAVE_ITEM(S3C64XX_EINT0CON1),
-	SAVE_ITEM(S3C64XX_EINT0FLTCON0),
-	SAVE_ITEM(S3C64XX_EINT0FLTCON1),
-	SAVE_ITEM(S3C64XX_EINT0FLTCON2),
-	SAVE_ITEM(S3C64XX_EINT0FLTCON3),
-	SAVE_ITEM(S3C64XX_EINT0MASK),
-	SAVE_ITEM(S3C64XX_TINT_CSTAT),
-};
-
-static struct irq_grp_save {
-	u32	fltcon;
-	u32	con;
-	u32	mask;
-} eint_grp_save[5];
-
-static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS];
-
-static int s3c64xx_irq_pm_suspend(struct sys_device *dev, pm_message_t state)
-{
-	struct irq_grp_save *grp = eint_grp_save;
-	int i;
-
-	S3C_PMDBG("%s: suspending IRQs\n", __func__);
-
-	s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
-
-	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
-		irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM);
-
-	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
-		grp->con = __raw_readl(S3C64XX_EINT12CON + (i * 4));
-		grp->mask = __raw_readl(S3C64XX_EINT12MASK + (i * 4));
-		grp->fltcon = __raw_readl(S3C64XX_EINT12FLTCON + (i * 4));
-	}
-
-	return 0;
-}
-
-static int s3c64xx_irq_pm_resume(struct sys_device *dev)
-{
-	struct irq_grp_save *grp = eint_grp_save;
-	int i;
-
-	S3C_PMDBG("%s: resuming IRQs\n", __func__);
-
-	s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
-
-	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
-		__raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM);
-
-	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
-		__raw_writel(grp->con, S3C64XX_EINT12CON + (i * 4));
-		__raw_writel(grp->mask, S3C64XX_EINT12MASK + (i * 4));
-		__raw_writel(grp->fltcon, S3C64XX_EINT12FLTCON + (i * 4));
-	}
-
-	S3C_PMDBG("%s: IRQ configuration restored\n", __func__);
-	return 0;
-}
-
-static struct sysdev_driver s3c64xx_irq_driver = {
-	.suspend = s3c64xx_irq_pm_suspend,
-	.resume	 = s3c64xx_irq_pm_resume,
-};
-
-static int __init s3c64xx_irq_pm_init(void)
-{
-	return sysdev_driver_register(&s3c64xx_sysclass, &s3c64xx_irq_driver);
-}
-
-arch_initcall(s3c64xx_irq_pm_init);
-
diff --git a/arch/arm/plat-s3c64xx/irq.c b/arch/arm/plat-s3c64xx/irq.c
deleted file mode 100644
index 8dc5b6da9789..000000000000
--- a/arch/arm/plat-s3c64xx/irq.c
+++ /dev/null
@@ -1,256 +0,0 @@
-/* arch/arm/plat-s3c64xx/irq.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C64XX - Interrupt handling
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/serial_core.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <asm/hardware/vic.h>
-
-#include <mach/map.h>
-#include <plat/regs-serial.h>
-#include <plat/regs-timer.h>
-#include <plat/cpu.h>
-
-/* Timer interrupt handling */
-
-static void s3c_irq_demux_timer(unsigned int base_irq, unsigned int sub_irq)
-{
-	generic_handle_irq(sub_irq);
-}
-
-static void s3c_irq_demux_timer0(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_timer(irq, IRQ_TIMER0);
-}
-
-static void s3c_irq_demux_timer1(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_timer(irq, IRQ_TIMER1);
-}
-
-static void s3c_irq_demux_timer2(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_timer(irq, IRQ_TIMER2);
-}
-
-static void s3c_irq_demux_timer3(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_timer(irq, IRQ_TIMER3);
-}
-
-static void s3c_irq_demux_timer4(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_timer(irq, IRQ_TIMER4);
-}
-
-/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */
-
-static void s3c_irq_timer_mask(unsigned int irq)
-{
-	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
-
-	reg &= 0x1f;  /* mask out pending interrupts */
-	reg &= ~(1 << (irq - IRQ_TIMER0));
-	__raw_writel(reg, S3C64XX_TINT_CSTAT);
-}
-
-static void s3c_irq_timer_unmask(unsigned int irq)
-{
-	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
-
-	reg &= 0x1f;  /* mask out pending interrupts */
-	reg |= 1 << (irq - IRQ_TIMER0);
-	__raw_writel(reg, S3C64XX_TINT_CSTAT);
-}
-
-static void s3c_irq_timer_ack(unsigned int irq)
-{
-	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
-
-	reg &= 0x1f;
-	reg |= (1 << 5) << (irq - IRQ_TIMER0);
-	__raw_writel(reg, S3C64XX_TINT_CSTAT);
-}
-
-static struct irq_chip s3c_irq_timer = {
-	.name		= "s3c-timer",
-	.mask		= s3c_irq_timer_mask,
-	.unmask		= s3c_irq_timer_unmask,
-	.ack		= s3c_irq_timer_ack,
-};
-
-struct uart_irq {
-	void __iomem	*regs;
-	unsigned int	 base_irq;
-	unsigned int	 parent_irq;
-};
-
-/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
- * are consecutive when looking up the interrupt in the demux routines.
- */
-static struct uart_irq uart_irqs[] = {
-	[0] = {
-		.regs		= S3C_VA_UART0,
-		.base_irq	= IRQ_S3CUART_BASE0,
-		.parent_irq	= IRQ_UART0,
-	},
-	[1] = {
-		.regs		= S3C_VA_UART1,
-		.base_irq	= IRQ_S3CUART_BASE1,
-		.parent_irq	= IRQ_UART1,
-	},
-	[2] = {
-		.regs		= S3C_VA_UART2,
-		.base_irq	= IRQ_S3CUART_BASE2,
-		.parent_irq	= IRQ_UART2,
-	},
-	[3] = {
-		.regs		= S3C_VA_UART3,
-		.base_irq	= IRQ_S3CUART_BASE3,
-		.parent_irq	= IRQ_UART3,
-	},
-};
-
-static inline void __iomem *s3c_irq_uart_base(unsigned int irq)
-{
-	struct uart_irq *uirq = get_irq_chip_data(irq);
-	return uirq->regs;
-}
-
-static inline unsigned int s3c_irq_uart_bit(unsigned int irq)
-{
-	return irq & 3;
-}
-
-/* UART interrupt registers, not worth adding to seperate include header */
-
-static void s3c_irq_uart_mask(unsigned int irq)
-{
-	void __iomem *regs = s3c_irq_uart_base(irq);
-	unsigned int bit = s3c_irq_uart_bit(irq);
-	u32 reg;
-
-	reg = __raw_readl(regs + S3C64XX_UINTM);
-	reg |= (1 << bit);
-	__raw_writel(reg, regs + S3C64XX_UINTM);
-}
-
-static void s3c_irq_uart_maskack(unsigned int irq)
-{
-	void __iomem *regs = s3c_irq_uart_base(irq);
-	unsigned int bit = s3c_irq_uart_bit(irq);
-	u32 reg;
-
-	reg = __raw_readl(regs + S3C64XX_UINTM);
-	reg |= (1 << bit);
-	__raw_writel(reg, regs + S3C64XX_UINTM);
-	__raw_writel(1 << bit, regs + S3C64XX_UINTP);
-}
-
-static void s3c_irq_uart_unmask(unsigned int irq)
-{
-	void __iomem *regs = s3c_irq_uart_base(irq);
-	unsigned int bit = s3c_irq_uart_bit(irq);
-	u32 reg;
-
-	reg = __raw_readl(regs + S3C64XX_UINTM);
-	reg &= ~(1 << bit);
-	__raw_writel(reg, regs + S3C64XX_UINTM);
-}
-
-static void s3c_irq_uart_ack(unsigned int irq)
-{
-	void __iomem *regs = s3c_irq_uart_base(irq);
-	unsigned int bit = s3c_irq_uart_bit(irq);
-
-	__raw_writel(1 << bit, regs + S3C64XX_UINTP);
-}
-
-static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc)
-{
-	struct uart_irq *uirq = &uart_irqs[irq - IRQ_UART0];
-	u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP);
-	int base = uirq->base_irq;
-
-	if (pend & (1 << 0))
-		generic_handle_irq(base);
-	if (pend & (1 << 1))
-		generic_handle_irq(base + 1);
-	if (pend & (1 << 2))
-		generic_handle_irq(base + 2);
-	if (pend & (1 << 3))
-		generic_handle_irq(base + 3);
-}
-
-static struct irq_chip s3c_irq_uart = {
-	.name		= "s3c-uart",
-	.mask		= s3c_irq_uart_mask,
-	.unmask		= s3c_irq_uart_unmask,
-	.mask_ack	= s3c_irq_uart_maskack,
-	.ack		= s3c_irq_uart_ack,
-};
-
-static void __init s3c64xx_uart_irq(struct uart_irq *uirq)
-{
-	void __iomem *reg_base = uirq->regs;
-	unsigned int irq;
-	int offs;
-
-	/* mask all interrupts at the start. */
-	__raw_writel(0xf, reg_base + S3C64XX_UINTM);
-
-	for (offs = 0; offs < 3; offs++) {
-		irq = uirq->base_irq + offs;
-
-		set_irq_chip(irq, &s3c_irq_uart);
-		set_irq_chip_data(irq, uirq);
-		set_irq_handler(irq, handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	set_irq_chained_handler(uirq->parent_irq, s3c_irq_demux_uart);
-}
-
-void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
-{
-	int uart, irq;
-
-	printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
-
-	/* initialise the pair of VICs */
-	vic_init(S3C_VA_VIC0, S3C_VIC0_BASE, vic0_valid, 0);
-	vic_init(S3C_VA_VIC1, S3C_VIC1_BASE, vic1_valid, 0);
-
-	/* add the timer sub-irqs */
-
-	set_irq_chained_handler(IRQ_TIMER0_VIC, s3c_irq_demux_timer0);
-	set_irq_chained_handler(IRQ_TIMER1_VIC, s3c_irq_demux_timer1);
-	set_irq_chained_handler(IRQ_TIMER2_VIC, s3c_irq_demux_timer2);
-	set_irq_chained_handler(IRQ_TIMER3_VIC, s3c_irq_demux_timer3);
-	set_irq_chained_handler(IRQ_TIMER4_VIC, s3c_irq_demux_timer4);
-
-	for (irq = IRQ_TIMER0; irq <= IRQ_TIMER4; irq++) {
-		set_irq_chip(irq, &s3c_irq_timer);
-		set_irq_handler(irq, handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	for (uart = 0; uart < ARRAY_SIZE(uart_irqs); uart++)
-		s3c64xx_uart_irq(&uart_irqs[uart]);
-}
-
-
diff --git a/arch/arm/plat-s3c64xx/pm.c b/arch/arm/plat-s3c64xx/pm.c
deleted file mode 100644
index 47632fc7eb66..000000000000
--- a/arch/arm/plat-s3c64xx/pm.c
+++ /dev/null
@@ -1,173 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/pm.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C64XX CPU PM support.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/suspend.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-
-#include <mach/map.h>
-
-#include <plat/pm.h>
-#include <plat/regs-sys.h>
-#include <plat/regs-gpio.h>
-#include <plat/regs-clock.h>
-#include <plat/regs-syscon-power.h>
-#include <plat/regs-gpio-memport.h>
-
-#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
-#include <plat/gpio-bank-n.h>
-
-void s3c_pm_debug_smdkled(u32 set, u32 clear)
-{
-	unsigned long flags;
-	u32 reg;
-
-	local_irq_save(flags);
-	reg = __raw_readl(S3C64XX_GPNCON);
-	reg &= ~(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) |
-		 S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15));
-	reg |= S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) |
-	       S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15);
-	__raw_writel(reg, S3C64XX_GPNCON);
-
-	reg = __raw_readl(S3C64XX_GPNDAT);
-	reg &= ~(clear << 12);
-	reg |= set << 12;
-	__raw_writel(reg, S3C64XX_GPNDAT);
-
-	local_irq_restore(flags);
-}
-#endif
-
-static struct sleep_save core_save[] = {
-	SAVE_ITEM(S3C_APLL_LOCK),
-	SAVE_ITEM(S3C_MPLL_LOCK),
-	SAVE_ITEM(S3C_EPLL_LOCK),
-	SAVE_ITEM(S3C_CLK_SRC),
-	SAVE_ITEM(S3C_CLK_DIV0),
-	SAVE_ITEM(S3C_CLK_DIV1),
-	SAVE_ITEM(S3C_CLK_DIV2),
-	SAVE_ITEM(S3C_CLK_OUT),
-	SAVE_ITEM(S3C_HCLK_GATE),
-	SAVE_ITEM(S3C_PCLK_GATE),
-	SAVE_ITEM(S3C_SCLK_GATE),
-	SAVE_ITEM(S3C_MEM0_GATE),
-
-	SAVE_ITEM(S3C_EPLL_CON1),
-	SAVE_ITEM(S3C_EPLL_CON0),
-
-	SAVE_ITEM(S3C64XX_MEM0DRVCON),
-	SAVE_ITEM(S3C64XX_MEM1DRVCON),
-
-#ifndef CONFIG_CPU_FREQ
-	SAVE_ITEM(S3C_APLL_CON),
-	SAVE_ITEM(S3C_MPLL_CON),
-#endif
-};
-
-static struct sleep_save misc_save[] = {
-	SAVE_ITEM(S3C64XX_AHB_CON0),
-	SAVE_ITEM(S3C64XX_AHB_CON1),
-	SAVE_ITEM(S3C64XX_AHB_CON2),
-	
-	SAVE_ITEM(S3C64XX_SPCON),
-
-	SAVE_ITEM(S3C64XX_MEM0CONSTOP),
-	SAVE_ITEM(S3C64XX_MEM1CONSTOP),
-	SAVE_ITEM(S3C64XX_MEM0CONSLP0),
-	SAVE_ITEM(S3C64XX_MEM0CONSLP1),
-	SAVE_ITEM(S3C64XX_MEM1CONSLP),
-};
-
-void s3c_pm_configure_extint(void)
-{
-	__raw_writel(s3c_irqwake_eintmask, S3C64XX_EINT_MASK);
-}
-
-void s3c_pm_restore_core(void)
-{
-	__raw_writel(0, S3C64XX_EINT_MASK);
-
-	s3c_pm_debug_smdkled(1 << 2, 0);
-
-	s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
-	s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
-}
-
-void s3c_pm_save_core(void)
-{
-	s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
-	s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
-}
-
-/* since both s3c6400 and s3c6410 share the same sleep pm calls, we
- * put the per-cpu code in here until any new cpu comes along and changes
- * this.
- */
-
-static void s3c64xx_cpu_suspend(void)
-{
-	unsigned long tmp;
-
-	/* set our standby method to sleep */
-
-	tmp = __raw_readl(S3C64XX_PWR_CFG);
-	tmp &= ~S3C64XX_PWRCFG_CFG_WFI_MASK;
-	tmp |= S3C64XX_PWRCFG_CFG_WFI_SLEEP;
-	__raw_writel(tmp, S3C64XX_PWR_CFG);
-
-	/* clear any old wakeup */
-
-	__raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT),
-		     S3C64XX_WAKEUP_STAT);
-
-	/* set the LED state to 0110 over sleep */
-	s3c_pm_debug_smdkled(3 << 1, 0xf);
-
-	/* issue the standby signal into the pm unit. Note, we
-	 * issue a write-buffer drain just in case */
-
-	tmp = 0;
-
-	asm("b 1f\n\t"
-	    ".align 5\n\t"
-	    "1:\n\t"
-	    "mcr p15, 0, %0, c7, c10, 5\n\t"
-	    "mcr p15, 0, %0, c7, c10, 4\n\t"
-	    "mcr p15, 0, %0, c7, c0, 4" :: "r" (tmp));
-
-	/* we should never get past here */
-
-	panic("sleep resumed to originator?");
-}
-
-static void s3c64xx_pm_prepare(void)
-{
-	/* store address of resume. */
-	__raw_writel(virt_to_phys(s3c_cpu_resume), S3C64XX_INFORM0);
-
-	/* ensure previous wakeup state is cleared before sleeping */
-	__raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT), S3C64XX_WAKEUP_STAT);
-}
-
-static int s3c64xx_pm_init(void)
-{
-	pm_cpu_prep = s3c64xx_pm_prepare;
-	pm_cpu_sleep = s3c64xx_cpu_suspend;
-	pm_uart_udivslot = 1;
-	return 0;
-}
-
-arch_initcall(s3c64xx_pm_init);
diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c
deleted file mode 100644
index ffd56deb9e81..000000000000
--- a/arch/arm/plat-s3c64xx/s3c6400-clock.c
+++ /dev/null
@@ -1,758 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/s3c6400-clock.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C6400 based common clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/sysdev.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/cpu-freq.h>
-
-#include <plat/regs-clock.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-
-/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
- * ext_xtal_mux for want of an actual name from the manual.
-*/
-
-static struct clk clk_ext_xtal_mux = {
-	.name		= "ext_xtal",
-	.id		= -1,
-};
-
-#define clk_fin_apll clk_ext_xtal_mux
-#define clk_fin_mpll clk_ext_xtal_mux
-#define clk_fin_epll clk_ext_xtal_mux
-
-#define clk_fout_mpll	clk_mpll
-#define clk_fout_epll	clk_epll
-
-struct clk_sources {
-	unsigned int	nr_sources;
-	struct clk	**sources;
-};
-
-struct clksrc_clk {
-	struct clk		clk;
-	unsigned int		mask;
-	unsigned int		shift;
-
-	struct clk_sources	*sources;
-
-	unsigned int		divider_shift;
-	void __iomem		*reg_divider;
-};
-
-static struct clk clk_fout_apll = {
-	.name		= "fout_apll",
-	.id		= -1,
-};
-
-static struct clk *clk_src_apll_list[] = {
-	[0] = &clk_fin_apll,
-	[1] = &clk_fout_apll,
-};
-
-static struct clk_sources clk_src_apll = {
-	.sources	= clk_src_apll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_apll_list),
-};
-
-static struct clksrc_clk clk_mout_apll = {
-	.clk	= {
-		.name		= "mout_apll",
-		.id		= -1,
-	},
-	.shift		= S3C6400_CLKSRC_APLL_MOUT_SHIFT,
-	.mask		= S3C6400_CLKSRC_APLL_MOUT,
-	.sources	= &clk_src_apll,
-};
-
-static struct clk *clk_src_epll_list[] = {
-	[0] = &clk_fin_epll,
-	[1] = &clk_fout_epll,
-};
-
-static struct clk_sources clk_src_epll = {
-	.sources	= clk_src_epll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_epll_list),
-};
-
-static struct clksrc_clk clk_mout_epll = {
-	.clk	= {
-		.name		= "mout_epll",
-		.id		= -1,
-	},
-	.shift		= S3C6400_CLKSRC_EPLL_MOUT_SHIFT,
-	.mask		= S3C6400_CLKSRC_EPLL_MOUT,
-	.sources	= &clk_src_epll,
-};
-
-static struct clk *clk_src_mpll_list[] = {
-	[0] = &clk_fin_mpll,
-	[1] = &clk_fout_mpll,
-};
-
-static struct clk_sources clk_src_mpll = {
-	.sources	= clk_src_mpll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
-};
-
-static struct clksrc_clk clk_mout_mpll = {
-	.clk = {
-		.name		= "mout_mpll",
-		.id		= -1,
-	},
-	.shift		= S3C6400_CLKSRC_MPLL_MOUT_SHIFT,
-	.mask		= S3C6400_CLKSRC_MPLL_MOUT,
-	.sources	= &clk_src_mpll,
-};
-
-static unsigned int armclk_mask;
-
-static unsigned long s3c64xx_clk_arm_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	u32 clkdiv;
-
-	/* divisor mask starts at bit0, so no need to shift */
-	clkdiv = __raw_readl(S3C_CLK_DIV0) & armclk_mask;
-
-	return rate / (clkdiv + 1);
-}
-
-static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk,
-						unsigned long rate)
-{
-	unsigned long parent = clk_get_rate(clk->parent);
-	u32 div;
-
-	if (parent < rate)
-		return parent;
-
-	div = (parent / rate) - 1;
-	if (div > armclk_mask)
-		div = armclk_mask;
-
-	return parent / (div + 1);
-}
-
-static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent = clk_get_rate(clk->parent);
-	u32 div;
-	u32 val;
-
-	if (rate < parent / (armclk_mask + 1))
-		return -EINVAL;
-
-	rate = clk_round_rate(clk, rate);
-	div = clk_get_rate(clk->parent) / rate;
-
-	val = __raw_readl(S3C_CLK_DIV0);
-	val &= ~armclk_mask;
-	val |= (div - 1);
-	__raw_writel(val, S3C_CLK_DIV0);
-
-	return 0;
-
-}
-
-static struct clk clk_arm = {
-	.name		= "armclk",
-	.id		= -1,
-	.parent		= &clk_mout_apll.clk,
-	.get_rate	= s3c64xx_clk_arm_get_rate,
-	.set_rate	= s3c64xx_clk_arm_set_rate,
-	.round_rate	= s3c64xx_clk_arm_round_rate,
-};
-
-static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-
-	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
-	if (__raw_readl(S3C_CLK_DIV0) & S3C6400_CLKDIV0_MPLL_MASK)
-		rate /= 2;
-
-	return rate;
-}
-
-static struct clk clk_dout_mpll = {
-	.name		= "dout_mpll",
-	.id		= -1,
-	.parent		= &clk_mout_mpll.clk,
-	.get_rate	= s3c64xx_clk_doutmpll_get_rate,
-};
-
-static struct clk *clkset_spi_mmc_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	&clk_fin_epll,
-	&clk_27m,
-};
-
-static struct clk_sources clkset_spi_mmc = {
-	.sources	= clkset_spi_mmc_list,
-	.nr_sources	= ARRAY_SIZE(clkset_spi_mmc_list),
-};
-
-static struct clk *clkset_irda_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	NULL,
-	&clk_27m,
-};
-
-static struct clk_sources clkset_irda = {
-	.sources	= clkset_irda_list,
-	.nr_sources	= ARRAY_SIZE(clkset_irda_list),
-};
-
-static struct clk *clkset_uart_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	NULL,
-	NULL
-};
-
-static struct clk_sources clkset_uart = {
-	.sources	= clkset_uart_list,
-	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
-};
-
-static struct clk *clkset_uhost_list[] = {
-	&clk_48m,
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	&clk_fin_epll,
-};
-
-static struct clk_sources clkset_uhost = {
-	.sources	= clkset_uhost_list,
-	.nr_sources	= ARRAY_SIZE(clkset_uhost_list),
-};
-
-
-/* The peripheral clocks are all controlled via clocksource followed
- * by an optional divider and gate stage. We currently roll this into
- * one clock which hides the intermediate clock from the mux.
- *
- * Note, the JPEG clock can only be an even divider...
- *
- * The scaler and LCD clocks depend on the S3C64XX version, and also
- * have a common parent divisor so are not included here.
- */
-
-static inline struct clksrc_clk *to_clksrc(struct clk *clk)
-{
-	return container_of(clk, struct clksrc_clk, clk);
-}
-
-static unsigned long s3c64xx_getrate_clksrc(struct clk *clk)
-{
-	struct clksrc_clk *sclk = to_clksrc(clk);
-	unsigned long rate = clk_get_rate(clk->parent);
-	u32 clkdiv = __raw_readl(sclk->reg_divider);
-
-	clkdiv >>= sclk->divider_shift;
-	clkdiv &= 0xf;
-	clkdiv++;
-
-	rate /= clkdiv;
-	return rate;
-}
-
-static int s3c64xx_setrate_clksrc(struct clk *clk, unsigned long rate)
-{
-	struct clksrc_clk *sclk = to_clksrc(clk);
-	void __iomem *reg = sclk->reg_divider;
-	unsigned int div;
-	u32 val;
-
-	rate = clk_round_rate(clk, rate);
-	div = clk_get_rate(clk->parent) / rate;
-	if (div > 16)
-		return -EINVAL;
-
-	val = __raw_readl(reg);
-	val &= ~(0xf << sclk->divider_shift);
-	val |= (div - 1) << sclk->divider_shift;
-	__raw_writel(val, reg);
-
-	return 0;
-}
-
-static int s3c64xx_setparent_clksrc(struct clk *clk, struct clk *parent)
-{
-	struct clksrc_clk *sclk = to_clksrc(clk);
-	struct clk_sources *srcs = sclk->sources;
-	u32 clksrc = __raw_readl(S3C_CLK_SRC);
-	int src_nr = -1;
-	int ptr;
-
-	for (ptr = 0; ptr < srcs->nr_sources; ptr++)
-		if (srcs->sources[ptr] == parent) {
-			src_nr = ptr;
-			break;
-		}
-
-	if (src_nr >= 0) {
-		clksrc &= ~sclk->mask;
-		clksrc |= src_nr << sclk->shift;
-
-		__raw_writel(clksrc, S3C_CLK_SRC);
-
-		clk->parent = parent;
-		return 0;
-	}
-
-	return -EINVAL;
-}
-
-static unsigned long s3c64xx_roundrate_clksrc(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		rate = parent_rate;
-	else {
-		div = parent_rate / rate;
-
-		if (div == 0)
-			div = 1;
-		if (div > 16)
-			div = 16;
-
-		rate = parent_rate / div;
-	}
-
-	return rate;
-}
-
-static struct clksrc_clk clk_mmc0 = {
-	.clk	= {
-		.name		= "mmc_bus",
-		.id		= 0,
-		.ctrlbit        = S3C_CLKCON_SCLK_MMC0,
-		.enable		= s3c64xx_sclk_ctrl,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= S3C6400_CLKSRC_MMC0_SHIFT,
-	.mask		= S3C6400_CLKSRC_MMC0_MASK,
-	.sources	= &clkset_spi_mmc,
-	.divider_shift	= S3C6400_CLKDIV1_MMC0_SHIFT,
-	.reg_divider	= S3C_CLK_DIV1,
-};
-
-static struct clksrc_clk clk_mmc1 = {
-	.clk	= {
-		.name		= "mmc_bus",
-		.id		= 1,
-		.ctrlbit        = S3C_CLKCON_SCLK_MMC1,
-		.enable		= s3c64xx_sclk_ctrl,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= S3C6400_CLKSRC_MMC1_SHIFT,
-	.mask		= S3C6400_CLKSRC_MMC1_MASK,
-	.sources	= &clkset_spi_mmc,
-	.divider_shift	= S3C6400_CLKDIV1_MMC1_SHIFT,
-	.reg_divider	= S3C_CLK_DIV1,
-};
-
-static struct clksrc_clk clk_mmc2 = {
-	.clk	= {
-		.name		= "mmc_bus",
-		.id		= 2,
-		.ctrlbit        = S3C_CLKCON_SCLK_MMC2,
-		.enable		= s3c64xx_sclk_ctrl,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= S3C6400_CLKSRC_MMC2_SHIFT,
-	.mask		= S3C6400_CLKSRC_MMC2_MASK,
-	.sources	= &clkset_spi_mmc,
-	.divider_shift	= S3C6400_CLKDIV1_MMC2_SHIFT,
-	.reg_divider	= S3C_CLK_DIV1,
-};
-
-static struct clksrc_clk clk_usbhost = {
-	.clk	= {
-		.name		= "usb-bus-host",
-		.id		= -1,
-		.ctrlbit        = S3C_CLKCON_SCLK_UHOST,
-		.enable		= s3c64xx_sclk_ctrl,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= S3C6400_CLKSRC_UHOST_SHIFT,
-	.mask		= S3C6400_CLKSRC_UHOST_MASK,
-	.sources	= &clkset_uhost,
-	.divider_shift	= S3C6400_CLKDIV1_UHOST_SHIFT,
-	.reg_divider	= S3C_CLK_DIV1,
-};
-
-static struct clksrc_clk clk_uart_uclk1 = {
-	.clk	= {
-		.name		= "uclk1",
-		.id		= -1,
-		.ctrlbit        = S3C_CLKCON_SCLK_UART,
-		.enable		= s3c64xx_sclk_ctrl,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= S3C6400_CLKSRC_UART_SHIFT,
-	.mask		= S3C6400_CLKSRC_UART_MASK,
-	.sources	= &clkset_uart,
-	.divider_shift	= S3C6400_CLKDIV2_UART_SHIFT,
-	.reg_divider	= S3C_CLK_DIV2,
-};
-
-/* Where does UCLK0 come from? */
-
-static struct clksrc_clk clk_spi0 = {
-	.clk	= {
-		.name		= "spi-bus",
-		.id		= 0,
-		.ctrlbit        = S3C_CLKCON_SCLK_SPI0,
-		.enable		= s3c64xx_sclk_ctrl,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= S3C6400_CLKSRC_SPI0_SHIFT,
-	.mask		= S3C6400_CLKSRC_SPI0_MASK,
-	.sources	= &clkset_spi_mmc,
-	.divider_shift	= S3C6400_CLKDIV2_SPI0_SHIFT,
-	.reg_divider	= S3C_CLK_DIV2,
-};
-
-static struct clksrc_clk clk_spi1 = {
-	.clk	= {
-		.name		= "spi-bus",
-		.id		= 1,
-		.ctrlbit        = S3C_CLKCON_SCLK_SPI1,
-		.enable		= s3c64xx_sclk_ctrl,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= S3C6400_CLKSRC_SPI1_SHIFT,
-	.mask		= S3C6400_CLKSRC_SPI1_MASK,
-	.sources	= &clkset_spi_mmc,
-	.divider_shift	= S3C6400_CLKDIV2_SPI1_SHIFT,
-	.reg_divider	= S3C_CLK_DIV2,
-};
-
-static struct clk clk_iis_cd0 = {
-	.name		= "iis_cdclk0",
-	.id		= -1,
-};
-
-static struct clk clk_iis_cd1 = {
-	.name		= "iis_cdclk1",
-	.id		= -1,
-};
-
-static struct clk clk_pcm_cd = {
-	.name		= "pcm_cdclk",
-	.id		= -1,
-};
-
-static struct clk *clkset_audio0_list[] = {
-	[0] = &clk_mout_epll.clk,
-	[1] = &clk_dout_mpll,
-	[2] = &clk_fin_epll,
-	[3] = &clk_iis_cd0,
-	[4] = &clk_pcm_cd,
-};
-
-static struct clk_sources clkset_audio0 = {
-	.sources	= clkset_audio0_list,
-	.nr_sources	= ARRAY_SIZE(clkset_audio0_list),
-};
-
-static struct clksrc_clk clk_audio0 = {
-	.clk	= {
-		.name		= "audio-bus",
-		.id		= 0,
-		.ctrlbit        = S3C_CLKCON_SCLK_AUDIO0,
-		.enable		= s3c64xx_sclk_ctrl,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= S3C6400_CLKSRC_AUDIO0_SHIFT,
-	.mask		= S3C6400_CLKSRC_AUDIO0_MASK,
-	.sources	= &clkset_audio0,
-	.divider_shift	= S3C6400_CLKDIV2_AUDIO0_SHIFT,
-	.reg_divider	= S3C_CLK_DIV2,
-};
-
-static struct clk *clkset_audio1_list[] = {
-	[0] = &clk_mout_epll.clk,
-	[1] = &clk_dout_mpll,
-	[2] = &clk_fin_epll,
-	[3] = &clk_iis_cd1,
-	[4] = &clk_pcm_cd,
-};
-
-static struct clk_sources clkset_audio1 = {
-	.sources	= clkset_audio1_list,
-	.nr_sources	= ARRAY_SIZE(clkset_audio1_list),
-};
-
-static struct clksrc_clk clk_audio1 = {
-	.clk	= {
-		.name		= "audio-bus",
-		.id		= 1,
-		.ctrlbit        = S3C_CLKCON_SCLK_AUDIO1,
-		.enable		= s3c64xx_sclk_ctrl,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= S3C6400_CLKSRC_AUDIO1_SHIFT,
-	.mask		= S3C6400_CLKSRC_AUDIO1_MASK,
-	.sources	= &clkset_audio1,
-	.divider_shift	= S3C6400_CLKDIV2_AUDIO1_SHIFT,
-	.reg_divider	= S3C_CLK_DIV2,
-};
-
-static struct clksrc_clk clk_irda = {
-	.clk	= {
-		.name		= "irda-bus",
-		.id		= 0,
-		.ctrlbit        = S3C_CLKCON_SCLK_IRDA,
-		.enable		= s3c64xx_sclk_ctrl,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= S3C6400_CLKSRC_IRDA_SHIFT,
-	.mask		= S3C6400_CLKSRC_IRDA_MASK,
-	.sources	= &clkset_irda,
-	.divider_shift	= S3C6400_CLKDIV2_IRDA_SHIFT,
-	.reg_divider	= S3C_CLK_DIV2,
-};
-
-static struct clk *clkset_camif_list[] = {
-	&clk_h2,
-};
-
-static struct clk_sources clkset_camif = {
-	.sources	= clkset_camif_list,
-	.nr_sources	= ARRAY_SIZE(clkset_camif_list),
-};
-
-static struct clksrc_clk clk_camif = {
-	.clk	= {
-		.name		= "camera",
-		.id		= -1,
-		.ctrlbit        = S3C_CLKCON_SCLK_CAM,
-		.enable		= s3c64xx_sclk_ctrl,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= 0,
-	.mask		= 0,
-	.sources	= &clkset_camif,
-	.divider_shift	= S3C6400_CLKDIV0_CAM_SHIFT,
-	.reg_divider	= S3C_CLK_DIV0,
-};
-
-/* Clock initialisation code */
-
-static struct clksrc_clk *init_parents[] = {
-	&clk_mout_apll,
-	&clk_mout_epll,
-	&clk_mout_mpll,
-	&clk_mmc0,
-	&clk_mmc1,
-	&clk_mmc2,
-	&clk_usbhost,
-	&clk_uart_uclk1,
-	&clk_spi0,
-	&clk_spi1,
-	&clk_audio0,
-	&clk_audio1,
-	&clk_irda,
-	&clk_camif,
-};
-
-static void __init_or_cpufreq s3c6400_set_clksrc(struct clksrc_clk *clk)
-{
-	struct clk_sources *srcs = clk->sources;
-	u32 clksrc = __raw_readl(S3C_CLK_SRC);
-
-	clksrc &= clk->mask;
-	clksrc >>= clk->shift;
-
-	if (clksrc > srcs->nr_sources || !srcs->sources[clksrc]) {
-		printk(KERN_ERR "%s: bad source %d\n",
-		       clk->clk.name, clksrc);
-		return;
-	}
-
-	clk->clk.parent = srcs->sources[clksrc];
-
-	printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n",
-	       clk->clk.name, clk->clk.parent->name, clksrc,
-	       clk_get_rate(&clk->clk));
-}
-
-#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
-
-void __init_or_cpufreq s3c6400_setup_clocks(void)
-{
-	struct clk *xtal_clk;
-	unsigned long xtal;
-	unsigned long fclk;
-	unsigned long hclk;
-	unsigned long hclk2;
-	unsigned long pclk;
-	unsigned long epll;
-	unsigned long apll;
-	unsigned long mpll;
-	unsigned int ptr;
-	u32 clkdiv0;
-
-	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
-	clkdiv0 = __raw_readl(S3C_CLK_DIV0);
-	printk(KERN_DEBUG "%s: clkdiv0 = %08x\n", __func__, clkdiv0);
-
-	xtal_clk = clk_get(NULL, "xtal");
-	BUG_ON(IS_ERR(xtal_clk));
-
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
-	/* For now assume the mux always selects the crystal */
-	clk_ext_xtal_mux.parent = xtal_clk;
-
-	epll = s3c6400_get_epll(xtal);
-	mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON));
-	apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON));
-
-	fclk = mpll;
-
-	printk(KERN_INFO "S3C64XX: PLL settings, A=%ld, M=%ld, E=%ld\n",
-	       apll, mpll, epll);
-
-	hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
-	hclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK);
-	pclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_PCLK);
-
-	printk(KERN_INFO "S3C64XX: HCLK2=%ld, HCLK=%ld, PCLK=%ld\n",
-	       hclk2, hclk, pclk);
-
-	clk_fout_mpll.rate = mpll;
-	clk_fout_epll.rate = epll;
-	clk_fout_apll.rate = apll;
-
-	clk_h2.rate = hclk2;
-	clk_h.rate = hclk;
-	clk_p.rate = pclk;
-	clk_f.rate = fclk;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
-		s3c6400_set_clksrc(init_parents[ptr]);
-}
-
-static struct clk *clks[] __initdata = {
-	&clk_ext_xtal_mux,
-	&clk_iis_cd0,
-	&clk_iis_cd1,
-	&clk_pcm_cd,
-	&clk_mout_epll.clk,
-	&clk_mout_mpll.clk,
-	&clk_dout_mpll,
-	&clk_mmc0.clk,
-	&clk_mmc1.clk,
-	&clk_mmc2.clk,
-	&clk_usbhost.clk,
-	&clk_uart_uclk1.clk,
-	&clk_spi0.clk,
-	&clk_spi1.clk,
-	&clk_audio0.clk,
-	&clk_audio1.clk,
-	&clk_irda.clk,
-	&clk_camif.clk,
-	&clk_arm,
-};
-
-/**
- * s3c6400_register_clocks - register clocks for s3c6400 and above
- * @armclk_divlimit: Divisor mask for ARMCLK
- *
- * Register the clocks for the S3C6400 and above SoC range, such
- * as ARMCLK and the clocks which have divider chains attached.
- *
- * This call does not setup the clocks, which is left to the
- * s3c6400_setup_clocks() call which may be needed by the cpufreq
- * or resume code to re-set the clocks if the bootloader has changed
- * them.
- */
-void __init s3c6400_register_clocks(unsigned armclk_divlimit)
-{
-	struct clk *clkp;
-	int ret;
-	int ptr;
-
-	armclk_mask = armclk_divlimit;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
-		clkp = clks[ptr];
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
-}
diff --git a/arch/arm/plat-s3c64xx/s3c6400-init.c b/arch/arm/plat-s3c64xx/s3c6400-init.c
deleted file mode 100644
index 6c28f39df097..000000000000
--- a/arch/arm/plat-s3c64xx/s3c6400-init.c
+++ /dev/null
@@ -1,29 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/s3c6400-init.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C6400 - CPU initialisation (common with other S3C64XX chips)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/s3c6400.h>
-#include <plat/s3c6410.h>
-
-/* uart registration process */
-
-void __init s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no);
-}
diff --git a/arch/arm/plat-s3c64xx/setup-fb-24bpp.c b/arch/arm/plat-s3c64xx/setup-fb-24bpp.c
deleted file mode 100644
index 8e28e448dd20..000000000000
--- a/arch/arm/plat-s3c64xx/setup-fb-24bpp.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/setup-fb-24bpp.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * Base S3C64XX setup information for 24bpp LCD framebuffer
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/fb.h>
-
-#include <mach/regs-fb.h>
-#include <mach/gpio.h>
-#include <plat/fb.h>
-#include <plat/gpio-cfg.h>
-
-extern void s3c64xx_fb_gpio_setup_24bpp(void)
-{
-	unsigned int gpio;
-
-	for (gpio = S3C64XX_GPI(0); gpio <= S3C64XX_GPI(15); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	for (gpio = S3C64XX_GPJ(0); gpio <= S3C64XX_GPJ(11); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-}
diff --git a/arch/arm/plat-s3c64xx/setup-i2c0.c b/arch/arm/plat-s3c64xx/setup-i2c0.c
deleted file mode 100644
index 364480763728..000000000000
--- a/arch/arm/plat-s3c64xx/setup-i2c0.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/setup-i2c0.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * Base S3C64XX I2C bus 0 gpio configuration
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <mach/gpio.h>
-#include <plat/iic.h>
-#include <plat/gpio-bank-b.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c0_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgpin(S3C64XX_GPB(5), S3C64XX_GPB5_I2C_SCL0);
-	s3c_gpio_cfgpin(S3C64XX_GPB(6), S3C64XX_GPB6_I2C_SDA0);
-	s3c_gpio_setpull(S3C64XX_GPB(5), S3C_GPIO_PULL_UP);
-	s3c_gpio_setpull(S3C64XX_GPB(6), S3C_GPIO_PULL_UP);
-}
diff --git a/arch/arm/plat-s3c64xx/setup-i2c1.c b/arch/arm/plat-s3c64xx/setup-i2c1.c
deleted file mode 100644
index bbe229bd90ca..000000000000
--- a/arch/arm/plat-s3c64xx/setup-i2c1.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/setup-i2c1.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * Base S3C64XX I2C bus 1 gpio configuration
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <mach/gpio.h>
-#include <plat/iic.h>
-#include <plat/gpio-bank-b.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c1_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgpin(S3C64XX_GPB(2), S3C64XX_GPB2_I2C_SCL1);
-	s3c_gpio_cfgpin(S3C64XX_GPB(3), S3C64XX_GPB3_I2C_SDA1);
-	s3c_gpio_setpull(S3C64XX_GPB(2), S3C_GPIO_PULL_UP);
-	s3c_gpio_setpull(S3C64XX_GPB(3), S3C_GPIO_PULL_UP);
-}
diff --git a/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c b/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
deleted file mode 100644
index a58c0cc7ba5e..000000000000
--- a/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
- *
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C64XX - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <mach/gpio.h>
-#include <plat/gpio-cfg.h>
-
-void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
-{
-	unsigned int gpio;
-	unsigned int end;
-
-	end = S3C64XX_GPG(2 + width);
-
-	/* Set all the necessary GPG pins to special-function 0 */
-	for (gpio = S3C64XX_GPG(0); gpio < end; gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2));
-}
-
-void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
-{
-	unsigned int gpio;
-	unsigned int end;
-
-	end = S3C64XX_GPH(2 + width);
-
-	/* Set all the necessary GPG pins to special-function 0 */
-	for (gpio = S3C64XX_GPH(0); gpio < end; gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
-}
-
-void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
-{
-	unsigned int gpio;
-	unsigned int end;
-
-	end = S3C64XX_GPH(6 + width);
-
-	/* Set all the necessary GPH pins to special-function 1 */
-	for (gpio = S3C64XX_GPH(6); gpio < end; gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	/* Set all the necessary GPC pins to special-function 1 */
-	for (gpio = S3C64XX_GPC(4); gpio < S3C64XX_GPC(6); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-}
diff --git a/arch/arm/plat-s3c64xx/sleep.S b/arch/arm/plat-s3c64xx/sleep.S
deleted file mode 100644
index 8e71fe90a373..000000000000
--- a/arch/arm/plat-s3c64xx/sleep.S
+++ /dev/null
@@ -1,144 +0,0 @@
-/* linux/0arch/arm/plat-s3c64xx/sleep.S
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C64XX CPU sleep code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <mach/map.h>
-
-#undef S3C64XX_VA_GPIO
-#define S3C64XX_VA_GPIO (0x0)
-
-#include <plat/regs-gpio.h>
-#include <plat/gpio-bank-n.h>
-
-#define LL_UART (S3C_PA_UART + (0x400 * CONFIG_S3C_LOWLEVEL_UART_PORT))
-
-	.text
-
-	/* s3c_cpu_save
-	 *
-	 * Save enough processor state to allow the restart of the pm.c
-	 * code after resume.
-	 *
-	 * entry:
-	 *	r0 = pointer to the save block
-	*/
-
-ENTRY(s3c_cpu_save)
-	stmfd	sp!, { r4 - r12, lr }
-
-	mrc	p15, 0, r4, c13, c0, 0	@ FCSE/PID
-	mrc	p15, 0, r5, c3, c0, 0	@ Domain ID
-	mrc	p15, 0, r6, c2, c0, 0	@ Translation Table BASE0
-	mrc	p15, 0, r7, c2, c0, 1	@ Translation Table BASE1
-	mrc	p15, 0, r8, c2, c0, 2	@ Translation Table Control
-	mrc	p15, 0, r9, c1, c0, 0	@ Control register
-	mrc	p15, 0, r10, c1, c0, 1	@ Auxiliary control register
-	mrc	p15, 0, r11, c1, c0, 2	@ Co-processor access controls
-
-	stmia	r0, { r4 - r13 }	@ Save CP registers and SP
-
-	@@ save our state to ram
-	bl	s3c_pm_cb_flushcache
-
-	@@ call final suspend code
-	ldr	r0, =pm_cpu_sleep
-	ldr	pc, [r0]
-	
-	@@ return to the caller, after the MMU is turned on.
-	@@ restore the last bits of the stack and return.
-resume_with_mmu:
-	ldmfd	sp!, { r4 - r12, pc }	@ return, from sp from s3c_cpu_save
-
-	.data
-
-	/* the next bit is code, but it requires easy access to the
-	 * s3c_sleep_save_phys data before the MMU is switched on, so
-	 * we store the code that needs this variable in the .data where
-	 * the value can be written to (the .text segment is RO).
-	*/
-
-	.global	s3c_sleep_save_phys
-s3c_sleep_save_phys:
-	.word	0
-
-	/* Sleep magic, the word before the resume entry point so that the
-	 * bootloader can check for a resumeable image. */
-
-	.word	0x2bedf00d
-
-	/* s3c_cpu_reusme
-	 *
-	 * This is the entry point, stored by whatever method the bootloader
-	 * requires to get the kernel runnign again. This code expects to be
-	 * entered with no caches live and the MMU disabled. It will then
-	 * restore the MMU and other basic CP registers saved and restart
-	 * the kernel C code to finish the resume code.
-	*/
-
-ENTRY(s3c_cpu_resume)
-	msr	cpsr_c, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
-	ldr	r2, =LL_UART		/* for debug */
-
-#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
-	/* Initialise the GPIO state if we are debugging via the SMDK LEDs,
-	 * as the uboot version supplied resets these to inputs during the
-	 * resume checks.
-	*/
-
-	ldr	r3, =S3C64XX_PA_GPIO
-	ldr	r0, [ r3, #S3C64XX_GPNCON ]
-	bic	r0, r0, #(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) | \
-			  S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15))
-	orr	r0, r0, #(S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) | \
-			  S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15))
-	str	r0, [ r3, #S3C64XX_GPNCON ]
-
-	ldr	r0, [ r3, #S3C64XX_GPNDAT ]
-	bic	r0, r0, #0xf << 12			@ GPN12..15
-	orr	r0, r0, #1 << 15			@ GPN15
-	str	r0, [ r3, #S3C64XX_GPNDAT ]
-#endif
-
-	/* __v6_setup from arch/arm/mm/proc-v6.S, ensure that the caches
-	 * are thoroughly cleaned just in case the bootloader didn't do it
-	 * for us. */
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c14, 0		@ clean+invalidate D cache
-	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
-	mcr	p15, 0, r0, c7, c15, 0		@ clean+invalidate cache
-	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
-	@@mcr	p15, 0, r0, c8, c7, 0		@ invalidate I + D TLBs
-	@@mcr	p15, 0, r0, c7, c7, 0		@ Invalidate I + D caches
-
-	ldr	r0, s3c_sleep_save_phys
-	ldmia	r0, { r4 - r13 }
-
-	mcr	p15, 0, r4, c13, c0, 0	@ FCSE/PID
-	mcr	p15, 0, r5, c3, c0, 0	@ Domain ID
-	mcr	p15, 0, r6, c2, c0, 0	@ Translation Table BASE0
-	mcr	p15, 0, r7, c2, c0, 1	@ Translation Table BASE1
-	mcr	p15, 0, r8, c2, c0, 2	@ Translation Table Control
-	mcr	p15, 0, r10, c1, c0, 1	@ Auxiliary control register
-
-	mov	r0, #0			@ restore copro access controls
-	mcr	p15, 0, r11, c1, c0, 2	@ Co-processor access controls
-	mcr 	p15, 0, r0, c7, c5, 4
-
-	ldr	r2, =resume_with_mmu
-	mcr	p15, 0, r9, c1, c0, 0		/* turn mmu back on */
-	nop
-	mov	pc, r2				/* jump back */
-
-	.end