ARM: pm: convert samsung platforms to generic suspend/resume support

Tested-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 4 insertions, 53 deletions

diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S
index e73e3b6e88d2..fd7032f84ae7 100644
--- a/arch/arm/plat-s3c24xx/sleep.S
+++ b/arch/arm/plat-s3c24xx/sleep.S
@@ -44,23 +44,13 @@
 	/* s3c_cpu_save
 	 *
 	 * entry:
-	 *	r0 = save address (virtual addr of s3c_sleep_save_phys)
+	 *	r1 = v:p offset
 	*/
 
 ENTRY(s3c_cpu_save)
 	stmfd	sp!, { r4 - r12, lr }
-
-	@@ store co-processor registers
-
-	mrc	p15, 0, r4, c13, c0, 0	@ PID
-	mrc	p15, 0, r5, c3, c0, 0	@ Domain ID
-	mrc	p15, 0, r6, c2, c0, 0	@ translation table base address
-	mrc	p15, 0, r7, c1, c0, 0	@ control register
-
-	stmia	r0, { r4 - r13 }
-
-	@@ write our state back to RAM
-	bl	s3c_pm_cb_flushcache
+	ldr	r3, =resume_with_mmu
+	bl	cpu_suspend
 
 	@@ jump to final code to send system to sleep
 	ldr	r0, =pm_cpu_sleep
@@ -76,20 +66,6 @@ resume_with_mmu:
 
 	.ltorg
 
-	@@ the next bits sit in the .data segment, even though they
-	@@ happen to be code... the s3c_sleep_save_phys needs to be
-	@@ accessed by the resume code before it can restore the MMU.
-	@@ This means that the variable has to be close enough for the
-	@@ code to read it... since the .text segment needs to be RO,
-	@@ the data segment can be the only place to put this code.
-
-	.data
-
-	.global	s3c_sleep_save_phys
-s3c_sleep_save_phys:
-	.word	0
-
-
 	/* sleep magic, to allow the bootloader to check for an valid
 	 * image to resume to. Must be the first word before the
 	 * s3c_cpu_resume entry.
@@ -100,10 +76,6 @@ s3c_sleep_save_phys:
 	/* s3c_cpu_resume
 	 *
 	 * resume code entry for bootloader to call
-	 *
-	 * we must put this code here in the data segment as we have no
-	 * other way of restoring the stack pointer after sleep, and we
-	 * must not write to the code segment (code is read-only)
 	*/
 
 ENTRY(s3c_cpu_resume)
@@ -134,25 +106,4 @@ ENTRY(s3c_cpu_resume)
 	beq	1001b
 #endif /* CONFIG_DEBUG_RESUME */
 
-	mov	r1, #0
-	mcr	p15, 0, r1, c8, c7, 0		@@ invalidate I & D TLBs
-	mcr	p15, 0, r1, c7, c7, 0		@@ invalidate I & D caches
-
-	ldr	r0, s3c_sleep_save_phys		@ address of restore block
-	ldmia	r0, { r4 - r13 }
-
-	mcr	p15, 0, r4, c13, c0, 0		@ PID
-	mcr	p15, 0, r5, c3, c0, 0		@ Domain ID
-	mcr	p15, 0, r6, c2, c0, 0		@ translation table base
-
-#ifdef CONFIG_DEBUG_RESUME
-	mov	r3, #'R'
-	strb	r3, [ r2, #S3C2410_UTXH ]
-#endif
-
-	ldr	r2, =resume_with_mmu
-	mcr	p15, 0, r7, c1, c0, 0		@ turn on MMU, etc
-	nop					@ second-to-last before mmu
-	mov	pc, r2				@ go back to virtual address
-
-	.ltorg
+	b	cpu_resume