ARM: S3C24XX: Remove plat-s3c24xx directory in arch/arm/

This patch is for just moving plat-s3c24xx/*.c into mach-s3c24xx/, so
that we could remove plat-s3c24xx directory. But since the PLAT_S3C24XX
is used in drivers, the statement is not deleted and it will be sorted
out next time.

Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

1 files changed, 0 insertions, 822 deletions

diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
deleted file mode 100644
index cb9f5e011e73..000000000000
--- a/arch/arm/plat-s3c24xx/irq.c
+++ /dev/null
@@ -1,822 +0,0 @@
-/*
- * S3C24XX IRQ handling
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- * Copyright (c) 2012 Heiko Stuebner <heiko@sntech.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-*/
-
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/irqdomain.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/regs-irqtype.h>
-#include <plat/pm.h>
-#include <plat/irq.h>
-
-#define S3C_IRQTYPE_NONE	0
-#define S3C_IRQTYPE_EINT	1
-#define S3C_IRQTYPE_EDGE	2
-#define S3C_IRQTYPE_LEVEL	3
-
-struct s3c_irq_data {
-	unsigned int type;
-	unsigned long parent_irq;
-
-	/* data gets filled during init */
-	struct s3c_irq_intc *intc;
-	unsigned long sub_bits;
-	struct s3c_irq_intc *sub_intc;
-};
-
-/*
- * Sructure holding the controller data
- * @reg_pending		register holding pending irqs
- * @reg_intpnd		special register intpnd in main intc
- * @reg_mask		mask register
- * @domain		irq_domain of the controller
- * @parent		parent controller for ext and sub irqs
- * @irqs		irq-data, always s3c_irq_data[32]
- */
-struct s3c_irq_intc {
-	void __iomem		*reg_pending;
-	void __iomem		*reg_intpnd;
-	void __iomem		*reg_mask;
-	struct irq_domain	*domain;
-	struct s3c_irq_intc	*parent;
-	struct s3c_irq_data	*irqs;
-};
-
-static void s3c_irq_mask(struct irq_data *data)
-{
-	struct s3c_irq_intc *intc = data->domain->host_data;
-	struct s3c_irq_intc *parent_intc = intc->parent;
-	struct s3c_irq_data *irq_data = &intc->irqs[data->hwirq];
-	struct s3c_irq_data *parent_data;
-	unsigned long mask;
-	unsigned int irqno;
-
-	mask = __raw_readl(intc->reg_mask);
-	mask |= (1UL << data->hwirq);
-	__raw_writel(mask, intc->reg_mask);
-
-	if (parent_intc && irq_data->parent_irq) {
-		parent_data = &parent_intc->irqs[irq_data->parent_irq];
-
-		/* check to see if we need to mask the parent IRQ */
-		if ((mask & parent_data->sub_bits) == parent_data->sub_bits) {
-			irqno = irq_find_mapping(parent_intc->domain,
-					 irq_data->parent_irq);
-			s3c_irq_mask(irq_get_irq_data(irqno));
-		}
-	}
-}
-
-static void s3c_irq_unmask(struct irq_data *data)
-{
-	struct s3c_irq_intc *intc = data->domain->host_data;
-	struct s3c_irq_intc *parent_intc = intc->parent;
-	struct s3c_irq_data *irq_data = &intc->irqs[data->hwirq];
-	unsigned long mask;
-	unsigned int irqno;
-
-	mask = __raw_readl(intc->reg_mask);
-	mask &= ~(1UL << data->hwirq);
-	__raw_writel(mask, intc->reg_mask);
-
-	if (parent_intc && irq_data->parent_irq) {
-		irqno = irq_find_mapping(parent_intc->domain,
-					 irq_data->parent_irq);
-		s3c_irq_unmask(irq_get_irq_data(irqno));
-	}
-}
-
-static inline void s3c_irq_ack(struct irq_data *data)
-{
-	struct s3c_irq_intc *intc = data->domain->host_data;
-	unsigned long bitval = 1UL << data->hwirq;
-
-	__raw_writel(bitval, intc->reg_pending);
-	if (intc->reg_intpnd)
-		__raw_writel(bitval, intc->reg_intpnd);
-}
-
-static int s3c_irqext_type_set(void __iomem *gpcon_reg,
-			       void __iomem *extint_reg,
-			       unsigned long gpcon_offset,
-			       unsigned long extint_offset,
-			       unsigned int type)
-{
-	unsigned long newvalue = 0, value;
-
-	/* Set the GPIO to external interrupt mode */
-	value = __raw_readl(gpcon_reg);
-	value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset);
-	__raw_writel(value, gpcon_reg);
-
-	/* Set the external interrupt to pointed trigger type */
-	switch (type)
-	{
-		case IRQ_TYPE_NONE:
-			pr_warn("No edge setting!\n");
-			break;
-
-		case IRQ_TYPE_EDGE_RISING:
-			newvalue = S3C2410_EXTINT_RISEEDGE;
-			break;
-
-		case IRQ_TYPE_EDGE_FALLING:
-			newvalue = S3C2410_EXTINT_FALLEDGE;
-			break;
-
-		case IRQ_TYPE_EDGE_BOTH:
-			newvalue = S3C2410_EXTINT_BOTHEDGE;
-			break;
-
-		case IRQ_TYPE_LEVEL_LOW:
-			newvalue = S3C2410_EXTINT_LOWLEV;
-			break;
-
-		case IRQ_TYPE_LEVEL_HIGH:
-			newvalue = S3C2410_EXTINT_HILEV;
-			break;
-
-		default:
-			pr_err("No such irq type %d", type);
-			return -EINVAL;
-	}
-
-	value = __raw_readl(extint_reg);
-	value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset);
-	__raw_writel(value, extint_reg);
-
-	return 0;
-}
-
-/* FIXME: make static when it's out of plat-samsung/irq.h */
-int s3c_irqext_type(struct irq_data *data, unsigned int type)
-{
-	void __iomem *extint_reg;
-	void __iomem *gpcon_reg;
-	unsigned long gpcon_offset, extint_offset;
-
-	if ((data->hwirq >= 4) && (data->hwirq <= 7)) {
-		gpcon_reg = S3C2410_GPFCON;
-		extint_reg = S3C24XX_EXTINT0;
-		gpcon_offset = (data->hwirq) * 2;
-		extint_offset = (data->hwirq) * 4;
-	} else if ((data->hwirq >= 8) && (data->hwirq <= 15)) {
-		gpcon_reg = S3C2410_GPGCON;
-		extint_reg = S3C24XX_EXTINT1;
-		gpcon_offset = (data->hwirq - 8) * 2;
-		extint_offset = (data->hwirq - 8) * 4;
-	} else if ((data->hwirq >= 16) && (data->hwirq <= 23)) {
-		gpcon_reg = S3C2410_GPGCON;
-		extint_reg = S3C24XX_EXTINT2;
-		gpcon_offset = (data->hwirq - 8) * 2;
-		extint_offset = (data->hwirq - 16) * 4;
-	} else {
-		return -EINVAL;
-	}
-
-	return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset,
-				   extint_offset, type);
-}
-
-static int s3c_irqext0_type(struct irq_data *data, unsigned int type)
-{
-	void __iomem *extint_reg;
-	void __iomem *gpcon_reg;
-	unsigned long gpcon_offset, extint_offset;
-
-	if ((data->hwirq >= 0) && (data->hwirq <= 3)) {
-		gpcon_reg = S3C2410_GPFCON;
-		extint_reg = S3C24XX_EXTINT0;
-		gpcon_offset = (data->hwirq) * 2;
-		extint_offset = (data->hwirq) * 4;
-	} else {
-		return -EINVAL;
-	}
-
-	return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset,
-				   extint_offset, type);
-}
-
-struct irq_chip s3c_irq_chip = {
-	.name		= "s3c",
-	.irq_ack	= s3c_irq_ack,
-	.irq_mask	= s3c_irq_mask,
-	.irq_unmask	= s3c_irq_unmask,
-	.irq_set_wake	= s3c_irq_wake
-};
-
-struct irq_chip s3c_irq_level_chip = {
-	.name		= "s3c-level",
-	.irq_mask	= s3c_irq_mask,
-	.irq_unmask	= s3c_irq_unmask,
-	.irq_ack	= s3c_irq_ack,
-};
-
-static struct irq_chip s3c_irqext_chip = {
-	.name		= "s3c-ext",
-	.irq_mask	= s3c_irq_mask,
-	.irq_unmask	= s3c_irq_unmask,
-	.irq_ack	= s3c_irq_ack,
-	.irq_set_type	= s3c_irqext_type,
-	.irq_set_wake	= s3c_irqext_wake
-};
-
-static struct irq_chip s3c_irq_eint0t4 = {
-	.name		= "s3c-ext0",
-	.irq_ack	= s3c_irq_ack,
-	.irq_mask	= s3c_irq_mask,
-	.irq_unmask	= s3c_irq_unmask,
-	.irq_set_wake	= s3c_irq_wake,
-	.irq_set_type	= s3c_irqext0_type,
-};
-
-static void s3c_irq_demux(unsigned int irq, struct irq_desc *desc)
-{
-	struct irq_chip *chip = irq_desc_get_chip(desc);
-	struct s3c_irq_intc *intc = desc->irq_data.domain->host_data;
-	struct s3c_irq_data *irq_data = &intc->irqs[desc->irq_data.hwirq];
-	struct s3c_irq_intc *sub_intc = irq_data->sub_intc;
-	unsigned long src;
-	unsigned long msk;
-	unsigned int n;
-
-	chained_irq_enter(chip, desc);
-
-	src = __raw_readl(sub_intc->reg_pending);
-	msk = __raw_readl(sub_intc->reg_mask);
-
-	src &= ~msk;
-	src &= irq_data->sub_bits;
-
-	while (src) {
-		n = __ffs(src);
-		src &= ~(1 << n);
-		generic_handle_irq(irq_find_mapping(sub_intc->domain, n));
-	}
-
-	chained_irq_exit(chip, desc);
-}
-
-#ifdef CONFIG_FIQ
-/**
- * s3c24xx_set_fiq - set the FIQ routing
- * @irq: IRQ number to route to FIQ on processor.
- * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing.
- *
- * Change the state of the IRQ to FIQ routing depending on @irq and @on. If
- * @on is true, the @irq is checked to see if it can be routed and the
- * interrupt controller updated to route the IRQ. If @on is false, the FIQ
- * routing is cleared, regardless of which @irq is specified.
- */
-int s3c24xx_set_fiq(unsigned int irq, bool on)
-{
-	u32 intmod;
-	unsigned offs;
-
-	if (on) {
-		offs = irq - FIQ_START;
-		if (offs > 31)
-			return -EINVAL;
-
-		intmod = 1 << offs;
-	} else {
-		intmod = 0;
-	}
-
-	__raw_writel(intmod, S3C2410_INTMOD);
-	return 0;
-}
-
-EXPORT_SYMBOL_GPL(s3c24xx_set_fiq);
-#endif
-
-static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq,
-							irq_hw_number_t hw)
-{
-	struct s3c_irq_intc *intc = h->host_data;
-	struct s3c_irq_data *irq_data = &intc->irqs[hw];
-	struct s3c_irq_intc *parent_intc;
-	struct s3c_irq_data *parent_irq_data;
-	unsigned int irqno;
-
-	if (!intc) {
-		pr_err("irq-s3c24xx: no controller found for hwirq %lu\n", hw);
-		return -EINVAL;
-	}
-
-	if (!irq_data) {
-		pr_err("irq-s3c24xx: no irq data found for hwirq %lu\n", hw);
-		return -EINVAL;
-	}
-
-	/* attach controller pointer to irq_data */
-	irq_data->intc = intc;
-
-	/* set handler and flags */
-	switch (irq_data->type) {
-	case S3C_IRQTYPE_NONE:
-		return 0;
-	case S3C_IRQTYPE_EINT:
-		if (irq_data->parent_irq)
-			irq_set_chip_and_handler(virq, &s3c_irqext_chip,
-						 handle_edge_irq);
-		else
-			irq_set_chip_and_handler(virq, &s3c_irq_eint0t4,
-						 handle_edge_irq);
-		break;
-	case S3C_IRQTYPE_EDGE:
-		if (irq_data->parent_irq ||
-		    intc->reg_pending == S3C2416_SRCPND2)
-			irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
-						 handle_edge_irq);
-		else
-			irq_set_chip_and_handler(virq, &s3c_irq_chip,
-						 handle_edge_irq);
-		break;
-	case S3C_IRQTYPE_LEVEL:
-		if (irq_data->parent_irq)
-			irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
-						 handle_level_irq);
-		else
-			irq_set_chip_and_handler(virq, &s3c_irq_chip,
-						 handle_level_irq);
-		break;
-	default:
-		pr_err("irq-s3c24xx: unsupported irqtype %d\n", irq_data->type);
-		return -EINVAL;
-	}
-	set_irq_flags(virq, IRQF_VALID);
-
-	if (irq_data->parent_irq) {
-		parent_intc = intc->parent;
-		if (!parent_intc) {
-			pr_err("irq-s3c24xx: no parent controller found for hwirq %lu\n",
-			       hw);
-			goto err;
-		}
-
-		parent_irq_data = &parent_intc->irqs[irq_data->parent_irq];
-		if (!irq_data) {
-			pr_err("irq-s3c24xx: no irq data found for hwirq %lu\n",
-			       hw);
-			goto err;
-		}
-
-		parent_irq_data->sub_intc = intc;
-		parent_irq_data->sub_bits |= (1UL << hw);
-
-		/* attach the demuxer to the parent irq */
-		irqno = irq_find_mapping(parent_intc->domain,
-					 irq_data->parent_irq);
-		if (!irqno) {
-			pr_err("irq-s3c24xx: could not find mapping for parent irq %lu\n",
-			       irq_data->parent_irq);
-			goto err;
-		}
-		irq_set_chained_handler(irqno, s3c_irq_demux);
-	}
-
-	return 0;
-
-err:
-	set_irq_flags(virq, 0);
-
-	/* the only error can result from bad mapping data*/
-	return -EINVAL;
-}
-
-static struct irq_domain_ops s3c24xx_irq_ops = {
-	.map = s3c24xx_irq_map,
-	.xlate = irq_domain_xlate_twocell,
-};
-
-static void s3c24xx_clear_intc(struct s3c_irq_intc *intc)
-{
-	void __iomem *reg_source;
-	unsigned long pend;
-	unsigned long last;
-	int i;
-
-	/* if intpnd is set, read the next pending irq from there */
-	reg_source = intc->reg_intpnd ? intc->reg_intpnd : intc->reg_pending;
-
-	last = 0;
-	for (i = 0; i < 4; i++) {
-		pend = __raw_readl(reg_source);
-
-		if (pend == 0 || pend == last)
-			break;
-
-		__raw_writel(pend, intc->reg_pending);
-		if (intc->reg_intpnd)
-			__raw_writel(pend, intc->reg_intpnd);
-
-		pr_info("irq: clearing pending status %08x\n", (int)pend);
-		last = pend;
-	}
-}
-
-struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np,
-				       struct s3c_irq_data *irq_data,
-				       struct s3c_irq_intc *parent,
-				       unsigned long address)
-{
-	struct s3c_irq_intc *intc;
-	void __iomem *base = (void *)0xf6000000; /* static mapping */
-	int irq_num;
-	int irq_start;
-	int irq_offset;
-	int ret;
-
-	intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL);
-	if (!intc)
-		return ERR_PTR(-ENOMEM);
-
-	intc->irqs = irq_data;
-
-	if (parent)
-		intc->parent = parent;
-
-	/* select the correct data for the controller.
-	 * Need to hard code the irq num start and offset
-	 * to preserve the static mapping for now
-	 */
-	switch (address) {
-	case 0x4a000000:
-		pr_debug("irq: found main intc\n");
-		intc->reg_pending = base;
-		intc->reg_mask = base + 0x08;
-		intc->reg_intpnd = base + 0x10;
-		irq_num = 32;
-		irq_start = S3C2410_IRQ(0);
-		irq_offset = 0;
-		break;
-	case 0x4a000018:
-		pr_debug("irq: found subintc\n");
-		intc->reg_pending = base + 0x18;
-		intc->reg_mask = base + 0x1c;
-		irq_num = 29;
-		irq_start = S3C2410_IRQSUB(0);
-		irq_offset = 0;
-		break;
-	case 0x4a000040:
-		pr_debug("irq: found intc2\n");
-		intc->reg_pending = base + 0x40;
-		intc->reg_mask = base + 0x48;
-		intc->reg_intpnd = base + 0x50;
-		irq_num = 8;
-		irq_start = S3C2416_IRQ(0);
-		irq_offset = 0;
-		break;
-	case 0x560000a4:
-		pr_debug("irq: found eintc\n");
-		base = (void *)0xfd000000;
-
-		intc->reg_mask = base + 0xa4;
-		intc->reg_pending = base + 0x08;
-		irq_num = 20;
-		irq_start = S3C2410_IRQ(32);
-		irq_offset = 4;
-		break;
-	default:
-		pr_err("irq: unsupported controller address\n");
-		ret = -EINVAL;
-		goto err;
-	}
-
-	/* now that all the data is complete, init the irq-domain */
-	s3c24xx_clear_intc(intc);
-	intc->domain = irq_domain_add_legacy(np, irq_num, irq_start,
-					     irq_offset, &s3c24xx_irq_ops,
-					     intc);
-	if (!intc->domain) {
-		pr_err("irq: could not create irq-domain\n");
-		ret = -EINVAL;
-		goto err;
-	}
-
-	return intc;
-
-err:
-	kfree(intc);
-	return ERR_PTR(ret);
-}
-
-/* s3c24xx_init_irq
- *
- * Initialise S3C2410 IRQ system
-*/
-
-static struct s3c_irq_data init_base[32] = {
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TICK */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* WDT */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* LCD */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBD */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBH */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* IIC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* RTC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
-};
-
-static struct s3c_irq_data init_eint[32] = {
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */
-};
-
-static struct s3c_irq_data init_subint[32] = {
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
-};
-
-void __init s3c24xx_init_irq(void)
-{
-	struct s3c_irq_intc *main_intc;
-
-#ifdef CONFIG_FIQ
-	init_FIQ(FIQ_START);
-#endif
-
-	main_intc = s3c24xx_init_intc(NULL, &init_base[0], NULL, 0x4a000000);
-	if (IS_ERR(main_intc)) {
-		pr_err("irq: could not create main interrupt controller\n");
-		return;
-	}
-
-	s3c24xx_init_intc(NULL, &init_subint[0], main_intc, 0x4a000018);
-	s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4);
-}
-
-#ifdef CONFIG_CPU_S3C2416
-static struct s3c_irq_data init_s3c2416base[32] = {
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TICK */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* LCD */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* DMA */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* NAND */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBD */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBH */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* IIC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
-	{ .type = S3C_IRQTYPE_NONE, },
-	{ .type = S3C_IRQTYPE_EDGE, }, /* RTC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
-};
-
-static struct s3c_irq_data init_s3c2416subint[32] = {
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
-	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
-	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
-	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
-	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */
-};
-
-static struct s3c_irq_data init_s3c2416_second[32] = {
-	{ .type = S3C_IRQTYPE_EDGE }, /* 2D */
-	{ .type = S3C_IRQTYPE_EDGE }, /* IIC1 */
-	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
-	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
-	{ .type = S3C_IRQTYPE_EDGE }, /* PCM0 */
-	{ .type = S3C_IRQTYPE_EDGE }, /* PCM1 */
-	{ .type = S3C_IRQTYPE_EDGE }, /* I2S0 */
-	{ .type = S3C_IRQTYPE_EDGE }, /* I2S1 */
-};
-
-void __init s3c2416_init_irq(void)
-{
-	struct s3c_irq_intc *main_intc;
-
-	pr_info("S3C2416: IRQ Support\n");
-
-#ifdef CONFIG_FIQ
-	init_FIQ(FIQ_START);
-#endif
-
-	main_intc = s3c24xx_init_intc(NULL, &init_s3c2416base[0], NULL, 0x4a000000);
-	if (IS_ERR(main_intc)) {
-		pr_err("irq: could not create main interrupt controller\n");
-		return;
-	}
-
-	s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4);
-	s3c24xx_init_intc(NULL, &init_s3c2416subint[0], main_intc, 0x4a000018);
-
-	s3c24xx_init_intc(NULL, &init_s3c2416_second[0], NULL, 0x4a000040);
-}
-
-#endif
-
-#ifdef CONFIG_CPU_S3C2443
-static struct s3c_irq_data init_s3c2443base[32] = {
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* CAM */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TICK */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* LCD */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* DMA */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* CFON */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* NAND */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBD */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBH */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* IIC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* RTC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
-};
-
-
-static struct s3c_irq_data init_s3c2443subint[32] = {
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */
-	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD1 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */
-};
-
-void __init s3c2443_init_irq(void)
-{
-	struct s3c_irq_intc *main_intc;
-
-	pr_info("S3C2443: IRQ Support\n");
-
-#ifdef CONFIG_FIQ
-	init_FIQ(FIQ_START);
-#endif
-
-	main_intc = s3c24xx_init_intc(NULL, &init_s3c2443base[0], NULL, 0x4a000000);
-	if (IS_ERR(main_intc)) {
-		pr_err("irq: could not create main interrupt controller\n");
-		return;
-	}
-
-	s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4);
-	s3c24xx_init_intc(NULL, &init_s3c2443subint[0], main_intc, 0x4a000018);
-}
-#endif