Merge tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC Header cleanups from Olof Johansson:
 "This is a collection of header file cleanups, mostly for OMAP and
  AT91, that keeps moving the platforms in the direction of
  multiplatform by removing the need for mach-dependent header files
  used in drivers and other places."

Fix up mostly trivial conflicts as per Olof.

* tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (106 commits)
  ARM: OMAP2+: Move iommu/iovmm headers to platform_data
  ARM: OMAP2+: Make some definitions local
  ARM: OMAP2+: Move iommu2 to drivers/iommu/omap-iommu2.c
  ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h
  ARM: OMAP2+: Move iopgtable header to drivers/iommu/
  ARM: OMAP: Merge iommu2.h into iommu.h
  atmel: move ATMEL_MAX_UART to platform_data/atmel.h
  ARM: OMAP: Remove omap_init_consistent_dma_size()
  arm: at91: move at91rm9200 rtc header in drivers/rtc
  arm: at91: move reset controller header to arm/arm/mach-at91
  arm: at91: move pit define to the driver
  arm: at91: move at91_shdwc.h to arch/arm/mach-at91
  arm: at91: move board header to arch/arm/mach-at91
  arn: at91: move at91_tc.h to arch/arm/mach-at91
  arm: at91 move at91_aic.h to arch/arm/mach-at91
  arm: at91 move board.h to arch/arm/mach-at91
  arm: at91: move platfarm_data to include/linux/platform_data/atmel.h
  arm: at91: drop machine defconfig
  ARM: OMAP: Remove NEED_MACH_GPIO_H
  ARM: OMAP: Remove unnecessary mach and plat includes
  ...

45 files changed, 232 insertions, 7493 deletions

diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index dacaee009a4e..8d885848600a 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -3,13 +3,12 @@
 #
 
 # Common support
-obj-y := common.o sram.o clock.o dma.o fb.o counter_32k.o
+obj-y := sram.o dma.o fb.o counter_32k.o
 obj-m :=
 obj-n :=
 obj-  :=
 
 # omap_device support (OMAP2+ only at the moment)
-obj-$(CONFIG_ARCH_OMAP2PLUS) += omap_device.o
 
 obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
 obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
@@ -20,4 +19,3 @@ obj-y += $(i2c-omap-m) $(i2c-omap-y)
 # OMAP mailbox framework
 obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o
 
-obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
deleted file mode 100644
index 9d7ac20ef8f9..000000000000
--- a/arch/arm/plat-omap/clock.c
+++ /dev/null
@@ -1,544 +0,0 @@
-/*
- *  linux/arch/arm/plat-omap/clock.c
- *
- *  Copyright (C) 2004 - 2008 Nokia corporation
- *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- *
- *  Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/export.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/cpufreq.h>
-#include <linux/io.h>
-
-#include <plat/clock.h>
-
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
-static DEFINE_SPINLOCK(clockfw_lock);
-
-static struct clk_functions *arch_clock;
-
-/*
- * Standard clock functions defined in include/linux/clk.h
- */
-
-int clk_enable(struct clk *clk)
-{
-	unsigned long flags;
-	int ret;
-
-	if (clk == NULL || IS_ERR(clk))
-		return -EINVAL;
-
-	if (!arch_clock || !arch_clock->clk_enable)
-		return -EINVAL;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	ret = arch_clock->clk_enable(clk);
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-	unsigned long flags;
-
-	if (clk == NULL || IS_ERR(clk))
-		return;
-
-	if (!arch_clock || !arch_clock->clk_disable)
-		return;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	if (clk->usecount == 0) {
-		pr_err("Trying disable clock %s with 0 usecount\n",
-		       clk->name);
-		WARN_ON(1);
-		goto out;
-	}
-
-	arch_clock->clk_disable(clk);
-
-out:
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	unsigned long flags;
-	unsigned long ret;
-
-	if (clk == NULL || IS_ERR(clk))
-		return 0;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	ret = clk->rate;
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-/*
- * Optional clock functions defined in include/linux/clk.h
- */
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long flags;
-	long ret;
-
-	if (clk == NULL || IS_ERR(clk))
-		return 0;
-
-	if (!arch_clock || !arch_clock->clk_round_rate)
-		return 0;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	ret = arch_clock->clk_round_rate(clk, rate);
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long flags;
-	int ret = -EINVAL;
-
-	if (clk == NULL || IS_ERR(clk))
-		return ret;
-
-	if (!arch_clock || !arch_clock->clk_set_rate)
-		return ret;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	ret = arch_clock->clk_set_rate(clk, rate);
-	if (ret == 0)
-		propagate_rate(clk);
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	unsigned long flags;
-	int ret = -EINVAL;
-
-	if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent))
-		return ret;
-
-	if (!arch_clock || !arch_clock->clk_set_parent)
-		return ret;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	if (clk->usecount == 0) {
-		ret = arch_clock->clk_set_parent(clk, parent);
-		if (ret == 0)
-			propagate_rate(clk);
-	} else
-		ret = -EBUSY;
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-struct clk *clk_get_parent(struct clk *clk)
-{
-	return clk->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
-
-/*
- * OMAP specific clock functions shared between omap1 and omap2
- */
-
-int __initdata mpurate;
-
-/*
- * By default we use the rate set by the bootloader.
- * You can override this with mpurate= cmdline option.
- */
-static int __init omap_clk_setup(char *str)
-{
-	get_option(&str, &mpurate);
-
-	if (!mpurate)
-		return 1;
-
-	if (mpurate < 1000)
-		mpurate *= 1000000;
-
-	return 1;
-}
-__setup("mpurate=", omap_clk_setup);
-
-/* Used for clocks that always have same value as the parent clock */
-unsigned long followparent_recalc(struct clk *clk)
-{
-	return clk->parent->rate;
-}
-
-/*
- * Used for clocks that have the same value as the parent clock,
- * divided by some factor
- */
-unsigned long omap_fixed_divisor_recalc(struct clk *clk)
-{
-	WARN_ON(!clk->fixed_div);
-
-	return clk->parent->rate / clk->fixed_div;
-}
-
-void clk_reparent(struct clk *child, struct clk *parent)
-{
-	list_del_init(&child->sibling);
-	if (parent)
-		list_add(&child->sibling, &parent->children);
-	child->parent = parent;
-
-	/* now do the debugfs renaming to reattach the child
-	   to the proper parent */
-}
-
-/* Propagate rate to children */
-void propagate_rate(struct clk *tclk)
-{
-	struct clk *clkp;
-
-	list_for_each_entry(clkp, &tclk->children, sibling) {
-		if (clkp->recalc)
-			clkp->rate = clkp->recalc(clkp);
-		propagate_rate(clkp);
-	}
-}
-
-static LIST_HEAD(root_clks);
-
-/**
- * recalculate_root_clocks - recalculate and propagate all root clocks
- *
- * Recalculates all root clocks (clocks with no parent), which if the
- * clock's .recalc is set correctly, should also propagate their rates.
- * Called at init.
- */
-void recalculate_root_clocks(void)
-{
-	struct clk *clkp;
-
-	list_for_each_entry(clkp, &root_clks, sibling) {
-		if (clkp->recalc)
-			clkp->rate = clkp->recalc(clkp);
-		propagate_rate(clkp);
-	}
-}
-
-/**
- * clk_preinit - initialize any fields in the struct clk before clk init
- * @clk: struct clk * to initialize
- *
- * Initialize any struct clk fields needed before normal clk initialization
- * can run.  No return value.
- */
-void clk_preinit(struct clk *clk)
-{
-	INIT_LIST_HEAD(&clk->children);
-}
-
-int clk_register(struct clk *clk)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return -EINVAL;
-
-	/*
-	 * trap out already registered clocks
-	 */
-	if (clk->node.next || clk->node.prev)
-		return 0;
-
-	mutex_lock(&clocks_mutex);
-	if (clk->parent)
-		list_add(&clk->sibling, &clk->parent->children);
-	else
-		list_add(&clk->sibling, &root_clks);
-
-	list_add(&clk->node, &clocks);
-	if (clk->init)
-		clk->init(clk);
-	mutex_unlock(&clocks_mutex);
-
-	return 0;
-}
-EXPORT_SYMBOL(clk_register);
-
-void clk_unregister(struct clk *clk)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return;
-
-	mutex_lock(&clocks_mutex);
-	list_del(&clk->sibling);
-	list_del(&clk->node);
-	mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL(clk_unregister);
-
-void clk_enable_init_clocks(void)
-{
-	struct clk *clkp;
-
-	list_for_each_entry(clkp, &clocks, node) {
-		if (clkp->flags & ENABLE_ON_INIT)
-			clk_enable(clkp);
-	}
-}
-
-int omap_clk_enable_autoidle_all(void)
-{
-	struct clk *c;
-	unsigned long flags;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-
-	list_for_each_entry(c, &clocks, node)
-		if (c->ops->allow_idle)
-			c->ops->allow_idle(c);
-
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-
-	return 0;
-}
-
-int omap_clk_disable_autoidle_all(void)
-{
-	struct clk *c;
-	unsigned long flags;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-
-	list_for_each_entry(c, &clocks, node)
-		if (c->ops->deny_idle)
-			c->ops->deny_idle(c);
-
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-
-	return 0;
-}
-
-/*
- * Low level helpers
- */
-static int clkll_enable_null(struct clk *clk)
-{
-	return 0;
-}
-
-static void clkll_disable_null(struct clk *clk)
-{
-}
-
-const struct clkops clkops_null = {
-	.enable		= clkll_enable_null,
-	.disable	= clkll_disable_null,
-};
-
-/*
- * Dummy clock
- *
- * Used for clock aliases that are needed on some OMAPs, but not others
- */
-struct clk dummy_ck = {
-	.name	= "dummy",
-	.ops	= &clkops_null,
-};
-
-/*
- *
- */
-
-#ifdef CONFIG_OMAP_RESET_CLOCKS
-/*
- * Disable any unused clocks left on by the bootloader
- */
-static int __init clk_disable_unused(void)
-{
-	struct clk *ck;
-	unsigned long flags;
-
-	if (!arch_clock || !arch_clock->clk_disable_unused)
-		return 0;
-
-	pr_info("clock: disabling unused clocks to save power\n");
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	list_for_each_entry(ck, &clocks, node) {
-		if (ck->ops == &clkops_null)
-			continue;
-
-		if (ck->usecount > 0 || !ck->enable_reg)
-			continue;
-
-		arch_clock->clk_disable_unused(ck);
-	}
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-
-	return 0;
-}
-late_initcall(clk_disable_unused);
-late_initcall(omap_clk_enable_autoidle_all);
-#endif
-
-int __init clk_init(struct clk_functions * custom_clocks)
-{
-	if (!custom_clocks) {
-		pr_err("No custom clock functions registered\n");
-		BUG();
-	}
-
-	arch_clock = custom_clocks;
-
-	return 0;
-}
-
-#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
-/*
- *	debugfs support to trace clock tree hierarchy and attributes
- */
-
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-
-static struct dentry *clk_debugfs_root;
-
-static int clk_dbg_show_summary(struct seq_file *s, void *unused)
-{
-	struct clk *c;
-	struct clk *pa;
-
-	mutex_lock(&clocks_mutex);
-	seq_printf(s, "%-30s %-30s %-10s %s\n",
-		"clock-name", "parent-name", "rate", "use-count");
-
-	list_for_each_entry(c, &clocks, node) {
-		pa = c->parent;
-		seq_printf(s, "%-30s %-30s %-10lu %d\n",
-			c->name, pa ? pa->name : "none", c->rate, c->usecount);
-	}
-	mutex_unlock(&clocks_mutex);
-
-	return 0;
-}
-
-static int clk_dbg_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, clk_dbg_show_summary, inode->i_private);
-}
-
-static const struct file_operations debug_clock_fops = {
-	.open           = clk_dbg_open,
-	.read           = seq_read,
-	.llseek         = seq_lseek,
-	.release        = single_release,
-};
-
-static int clk_debugfs_register_one(struct clk *c)
-{
-	int err;
-	struct dentry *d;
-	struct clk *pa = c->parent;
-
-	d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root);
-	if (!d)
-		return -ENOMEM;
-	c->dent = d;
-
-	d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount);
-	if (!d) {
-		err = -ENOMEM;
-		goto err_out;
-	}
-	d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
-	if (!d) {
-		err = -ENOMEM;
-		goto err_out;
-	}
-	d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
-	if (!d) {
-		err = -ENOMEM;
-		goto err_out;
-	}
-	return 0;
-
-err_out:
-	debugfs_remove_recursive(c->dent);
-	return err;
-}
-
-static int clk_debugfs_register(struct clk *c)
-{
-	int err;
-	struct clk *pa = c->parent;
-
-	if (pa && !pa->dent) {
-		err = clk_debugfs_register(pa);
-		if (err)
-			return err;
-	}
-
-	if (!c->dent) {
-		err = clk_debugfs_register_one(c);
-		if (err)
-			return err;
-	}
-	return 0;
-}
-
-static int __init clk_debugfs_init(void)
-{
-	struct clk *c;
-	struct dentry *d;
-	int err;
-
-	d = debugfs_create_dir("clock", NULL);
-	if (!d)
-		return -ENOMEM;
-	clk_debugfs_root = d;
-
-	list_for_each_entry(c, &clocks, node) {
-		err = clk_debugfs_register(c);
-		if (err)
-			goto err_out;
-	}
-
-	d = debugfs_create_file("summary", S_IRUGO,
-		d, NULL, &debug_clock_fops);
-	if (!d)
-		return -ENOMEM;
-
-	return 0;
-err_out:
-	debugfs_remove_recursive(clk_debugfs_root);
-	return err;
-}
-late_initcall(clk_debugfs_init);
-
-#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
deleted file mode 100644
index 111315a69354..000000000000
--- a/arch/arm/plat-omap/common.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * linux/arch/arm/plat-omap/common.c
- *
- * Code common to all OMAP machines.
- * The file is created by Tony Lindgren <tony@atomide.com>
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/dma-mapping.h>
-
-#include <plat/common.h>
-#include <plat/vram.h>
-#include <linux/platform_data/dsp-omap.h>
-#include <plat/dma.h>
-
-#include <plat/omap-secure.h>
-
-void __init omap_reserve(void)
-{
-	omap_vram_reserve_sdram_memblock();
-	omap_dsp_reserve_sdram_memblock();
-	omap_secure_ram_reserve_memblock();
-	omap_barrier_reserve_memblock();
-}
-
-void __init omap_init_consistent_dma_size(void)
-{
-#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
-	init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20);
-#endif
-}
-
-/*
- * Stub function for OMAP2 so that common files
- * continue to build when custom builds are used
- */
-int __weak omap_secure_ram_reserve_memblock(void)
-{
-	return 0;
-}
diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c
index 87ba8dd0d791..f3771cdb9838 100644
--- a/arch/arm/plat-omap/counter_32k.c
+++ b/arch/arm/plat-omap/counter_32k.c
@@ -22,9 +22,6 @@
 #include <asm/mach/time.h>
 #include <asm/sched_clock.h>
 
-#include <plat/common.h>
-#include <plat/clock.h>
-
 /* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */
 #define OMAP2_32KSYNCNT_REV_OFF		0x0
 #define OMAP2_32KSYNCNT_REV_SCHEME	(0x3 << 30)
diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c
index 5a4678edd65a..a609e2161817 100644
--- a/arch/arm/plat-omap/debug-devices.c
+++ b/arch/arm/plat-omap/debug-devices.c
@@ -15,8 +15,7 @@
 #include <linux/io.h>
 #include <linux/smc91x.h>
 
-#include <mach/hardware.h>
-#include "../mach-omap2/debug-devices.h"
+#include <plat/debug-devices.h>
 
 /* Many OMAP development platforms reuse the same "debug board"; these
  * platforms include H2, H3, H4, and Perseus2.
diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
index ea29bbe8e5cf..c43ea21f33b4 100644
--- a/arch/arm/plat-omap/debug-leds.c
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -17,16 +17,33 @@
 #include <linux/platform_data/gpio-omap.h>
 #include <linux/slab.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
-#include <plat/fpga.h>
-
 /* Many OMAP development platforms reuse the same "debug board"; these
  * platforms include H2, H3, H4, and Perseus2.  There are 16 LEDs on the
  * debug board (all green), accessed through FPGA registers.
  */
 
+/* NOTE:  most boards don't have a static mapping for the FPGA ... */
+struct h2p2_dbg_fpga {
+	/* offset 0x00 */
+	u16		smc91x[8];
+	/* offset 0x10 */
+	u16		fpga_rev;
+	u16		board_rev;
+	u16		gpio_outputs;
+	u16		leds;
+	/* offset 0x18 */
+	u16		misc_inputs;
+	u16		lan_status;
+	u16		lan_reset;
+	u16		reserved0;
+	/* offset 0x20 */
+	u16		ps2_data;
+	u16		ps2_ctrl;
+	/* plus also 4 rs232 ports ... */
+};
+
 static struct h2p2_dbg_fpga __iomem *fpga;
 
 static u16 fpga_led_state;
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index c76ed8bff838..c288b76f8e6c 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -36,9 +36,7 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 
-#include <plat/cpu.h>
-#include <plat/dma.h>
-#include <plat/tc.h>
+#include <plat-omap/dma-omap.h>
 
 /*
  * MAX_LOGICAL_DMA_CH_COUNT: the maximum number of logical DMA
@@ -175,12 +173,13 @@ static inline void set_gdma_dev(int req, int dev)
 #define omap_writel(val, reg)	do {} while (0)
 #endif
 
+#ifdef CONFIG_ARCH_OMAP1
 void omap_set_dma_priority(int lch, int dst_port, int priority)
 {
 	unsigned long reg;
 	u32 l;
 
-	if (cpu_class_is_omap1()) {
+	if (dma_omap1()) {
 		switch (dst_port) {
 		case OMAP_DMA_PORT_OCP_T1:	/* FFFECC00 */
 			reg = OMAP_TC_OCPT1_PRIOR;
@@ -203,18 +202,22 @@ void omap_set_dma_priority(int lch, int dst_port, int priority)
 		l |= (priority & 0xf) << 8;
 		omap_writel(l, reg);
 	}
+}
+#endif
 
-	if (cpu_class_is_omap2()) {
-		u32 ccr;
+#ifdef CONFIG_ARCH_OMAP2PLUS
+void omap_set_dma_priority(int lch, int dst_port, int priority)
+{
+	u32 ccr;
 
-		ccr = p->dma_read(CCR, lch);
-		if (priority)
-			ccr |= (1 << 6);
-		else
-			ccr &= ~(1 << 6);
-		p->dma_write(ccr, CCR, lch);
-	}
+	ccr = p->dma_read(CCR, lch);
+	if (priority)
+		ccr |= (1 << 6);
+	else
+		ccr &= ~(1 << 6);
+	p->dma_write(ccr, CCR, lch);
 }
+#endif
 EXPORT_SYMBOL(omap_set_dma_priority);
 
 void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
@@ -228,7 +231,7 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
 	l |= data_type;
 	p->dma_write(l, CSDP, lch);
 
-	if (cpu_class_is_omap1()) {
+	if (dma_omap1()) {
 		u16 ccr;
 
 		ccr = p->dma_read(CCR, lch);
@@ -244,7 +247,7 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
 		p->dma_write(ccr, CCR2, lch);
 	}
 
-	if (cpu_class_is_omap2() && dma_trigger) {
+	if (dma_omap2plus() && dma_trigger) {
 		u32 val;
 
 		val = p->dma_read(CCR, lch);
@@ -284,7 +287,7 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
 {
 	BUG_ON(omap_dma_in_1510_mode());
 
-	if (cpu_class_is_omap1()) {
+	if (dma_omap1()) {
 		u16 w;
 
 		w = p->dma_read(CCR2, lch);
@@ -314,7 +317,7 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
 		p->dma_write(w, LCH_CTRL, lch);
 	}
 
-	if (cpu_class_is_omap2()) {
+	if (dma_omap2plus()) {
 		u32 val;
 
 		val = p->dma_read(CCR, lch);
@@ -342,7 +345,7 @@ EXPORT_SYMBOL(omap_set_dma_color_mode);
 
 void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode)
 {
-	if (cpu_class_is_omap2()) {
+	if (dma_omap2plus()) {
 		u32 csdp;
 
 		csdp = p->dma_read(CSDP, lch);
@@ -355,7 +358,7 @@ EXPORT_SYMBOL(omap_set_dma_write_mode);
 
 void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode)
 {
-	if (cpu_class_is_omap1() && !cpu_is_omap15xx()) {
+	if (dma_omap1() && !dma_omap15xx()) {
 		u32 l;
 
 		l = p->dma_read(LCH_CTRL, lch);
@@ -373,7 +376,7 @@ void omap_set_dma_src_params(int lch, int src_port, int src_amode,
 {
 	u32 l;
 
-	if (cpu_class_is_omap1()) {
+	if (dma_omap1()) {
 		u16 w;
 
 		w = p->dma_read(CSDP, lch);
@@ -415,7 +418,7 @@ EXPORT_SYMBOL(omap_set_dma_params);
 
 void omap_set_dma_src_index(int lch, int eidx, int fidx)
 {
-	if (cpu_class_is_omap2())
+	if (dma_omap2plus())
 		return;
 
 	p->dma_write(eidx, CSEI, lch);
@@ -447,13 +450,13 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
 	case OMAP_DMA_DATA_BURST_DIS:
 		break;
 	case OMAP_DMA_DATA_BURST_4:
-		if (cpu_class_is_omap2())
+		if (dma_omap2plus())
 			burst = 0x1;
 		else
 			burst = 0x2;
 		break;
 	case OMAP_DMA_DATA_BURST_8:
-		if (cpu_class_is_omap2()) {
+		if (dma_omap2plus()) {
 			burst = 0x2;
 			break;
 		}
@@ -463,7 +466,7 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
 		 * fall through
 		 */
 	case OMAP_DMA_DATA_BURST_16:
-		if (cpu_class_is_omap2()) {
+		if (dma_omap2plus()) {
 			burst = 0x3;
 			break;
 		}
@@ -487,7 +490,7 @@ void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
 {
 	u32 l;
 
-	if (cpu_class_is_omap1()) {
+	if (dma_omap1()) {
 		l = p->dma_read(CSDP, lch);
 		l &= ~(0x1f << 9);
 		l |= dest_port << 9;
@@ -508,7 +511,7 @@ EXPORT_SYMBOL(omap_set_dma_dest_params);
 
 void omap_set_dma_dest_index(int lch, int eidx, int fidx)
 {
-	if (cpu_class_is_omap2())
+	if (dma_omap2plus())
 		return;
 
 	p->dma_write(eidx, CDEI, lch);
@@ -540,19 +543,19 @@ void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
 	case OMAP_DMA_DATA_BURST_DIS:
 		break;
 	case OMAP_DMA_DATA_BURST_4:
-		if (cpu_class_is_omap2())
+		if (dma_omap2plus())
 			burst = 0x1;
 		else
 			burst = 0x2;
 		break;
 	case OMAP_DMA_DATA_BURST_8:
-		if (cpu_class_is_omap2())
+		if (dma_omap2plus())
 			burst = 0x2;
 		else
 			burst = 0x3;
 		break;
 	case OMAP_DMA_DATA_BURST_16:
-		if (cpu_class_is_omap2()) {
+		if (dma_omap2plus()) {
 			burst = 0x3;
 			break;
 		}
@@ -573,7 +576,7 @@ EXPORT_SYMBOL(omap_set_dma_dest_burst_mode);
 static inline void omap_enable_channel_irq(int lch)
 {
 	/* Clear CSR */
-	if (cpu_class_is_omap1())
+	if (dma_omap1())
 		p->dma_read(CSR, lch);
 	else
 		p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
@@ -587,7 +590,7 @@ static inline void omap_disable_channel_irq(int lch)
 	/* disable channel interrupts */
 	p->dma_write(0, CICR, lch);
 	/* Clear CSR */
-	if (cpu_class_is_omap1())
+	if (dma_omap1())
 		p->dma_read(CSR, lch);
 	else
 		p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
@@ -611,7 +614,7 @@ static inline void enable_lnk(int lch)
 
 	l = p->dma_read(CLNK_CTRL, lch);
 
-	if (cpu_class_is_omap1())
+	if (dma_omap1())
 		l &= ~(1 << 14);
 
 	/* Set the ENABLE_LNK bits */
@@ -619,7 +622,7 @@ static inline void enable_lnk(int lch)
 		l = dma_chan[lch].next_lch | (1 << 15);
 
 #ifndef CONFIG_ARCH_OMAP1
-	if (cpu_class_is_omap2())
+	if (dma_omap2plus())
 		if (dma_chan[lch].next_linked_ch != -1)
 			l = dma_chan[lch].next_linked_ch | (1 << 15);
 #endif
@@ -636,12 +639,12 @@ static inline void disable_lnk(int lch)
 	/* Disable interrupts */
 	omap_disable_channel_irq(lch);
 
-	if (cpu_class_is_omap1()) {
+	if (dma_omap1()) {
 		/* Set the STOP_LNK bit */
 		l |= 1 << 14;
 	}
 
-	if (cpu_class_is_omap2()) {
+	if (dma_omap2plus()) {
 		/* Clear the ENABLE_LNK bit */
 		l &= ~(1 << 15);
 	}
@@ -655,7 +658,7 @@ static inline void omap2_enable_irq_lch(int lch)
 	u32 val;
 	unsigned long flags;
 
-	if (!cpu_class_is_omap2())
+	if (dma_omap1())
 		return;
 
 	spin_lock_irqsave(&dma_chan_lock, flags);
@@ -673,7 +676,7 @@ static inline void omap2_disable_irq_lch(int lch)
 	u32 val;
 	unsigned long flags;
 
-	if (!cpu_class_is_omap2())
+	if (dma_omap1())
 		return;
 
 	spin_lock_irqsave(&dma_chan_lock, flags);
@@ -712,7 +715,7 @@ int omap_request_dma(int dev_id, const char *dev_name,
 	if (p->clear_lch_regs)
 		p->clear_lch_regs(free_ch);
 
-	if (cpu_class_is_omap2())
+	if (dma_omap2plus())
 		omap_clear_dma(free_ch);
 
 	spin_unlock_irqrestore(&dma_chan_lock, flags);
@@ -723,7 +726,7 @@ int omap_request_dma(int dev_id, const char *dev_name,
 	chan->flags = 0;
 
 #ifndef CONFIG_ARCH_OMAP1
-	if (cpu_class_is_omap2()) {
+	if (dma_omap2plus()) {
 		chan->chain_id = -1;
 		chan->next_linked_ch = -1;
 	}
@@ -731,13 +734,13 @@ int omap_request_dma(int dev_id, const char *dev_name,
 
 	chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
 
-	if (cpu_class_is_omap1())
+	if (dma_omap1())
 		chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ;
-	else if (cpu_class_is_omap2())
+	else if (dma_omap2plus())
 		chan->enabled_irqs |= OMAP2_DMA_MISALIGNED_ERR_IRQ |
 			OMAP2_DMA_TRANS_ERR_IRQ;
 
-	if (cpu_is_omap16xx()) {
+	if (dma_omap16xx()) {
 		/* If the sync device is set, configure it dynamically. */
 		if (dev_id != 0) {
 			set_gdma_dev(free_ch + 1, dev_id);
@@ -748,11 +751,11 @@ int omap_request_dma(int dev_id, const char *dev_name,
 		 * id.
 		 */
 		p->dma_write(dev_id | (1 << 10), CCR, free_ch);
-	} else if (cpu_is_omap7xx() || cpu_is_omap15xx()) {
+	} else if (dma_omap1()) {
 		p->dma_write(dev_id, CCR, free_ch);
 	}
 
-	if (cpu_class_is_omap2()) {
+	if (dma_omap2plus()) {
 		omap_enable_channel_irq(free_ch);
 		omap2_enable_irq_lch(free_ch);
 	}
@@ -774,7 +777,7 @@ void omap_free_dma(int lch)
 	}
 
 	/* Disable interrupt for logical channel */
-	if (cpu_class_is_omap2())
+	if (dma_omap2plus())
 		omap2_disable_irq_lch(lch);
 
 	/* Disable all DMA interrupts for the channel. */
@@ -784,7 +787,7 @@ void omap_free_dma(int lch)
 	p->dma_write(0, CCR, lch);
 
 	/* Clear registers */
-	if (cpu_class_is_omap2())
+	if (dma_omap2plus())
 		omap_clear_dma(lch);
 
 	spin_lock_irqsave(&dma_chan_lock, flags);
@@ -810,7 +813,7 @@ omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams)
 {
 	u32 reg;
 
-	if (!cpu_class_is_omap2()) {
+	if (dma_omap1()) {
 		printk(KERN_ERR "FIXME: no %s on 15xx/16xx\n", __func__);
 		return;
 	}
@@ -849,7 +852,7 @@ omap_dma_set_prio_lch(int lch, unsigned char read_prio,
 	}
 	l = p->dma_read(CCR, lch);
 	l &= ~((1 << 6) | (1 << 26));
-	if (cpu_class_is_omap2() && !cpu_is_omap242x())
+	if (d->dev_caps & IS_RW_PRIORITY)
 		l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26);
 	else
 		l |= ((read_prio & 0x1) << 6);
@@ -882,7 +885,7 @@ void omap_start_dma(int lch)
 	 * The CPC/CDAC register needs to be initialized to zero
 	 * before starting dma transfer.
 	 */
-	if (cpu_is_omap15xx())
+	if (dma_omap15xx())
 		p->dma_write(0, CPC, lch);
 	else
 		p->dma_write(0, CDAC, lch);
@@ -1045,7 +1048,7 @@ dma_addr_t omap_get_dma_src_pos(int lch)
 {
 	dma_addr_t offset = 0;
 
-	if (cpu_is_omap15xx())
+	if (dma_omap15xx())
 		offset = p->dma_read(CPC, lch);
 	else
 		offset = p->dma_read(CSAC, lch);
@@ -1053,7 +1056,7 @@ dma_addr_t omap_get_dma_src_pos(int lch)
 	if (IS_DMA_ERRATA(DMA_ERRATA_3_3) && offset == 0)
 		offset = p->dma_read(CSAC, lch);
 
-	if (!cpu_is_omap15xx()) {
+	if (!dma_omap15xx()) {
 		/*
 		 * CDAC == 0 indicates that the DMA transfer on the channel has
 		 * not been started (no data has been transferred so far).
@@ -1065,7 +1068,7 @@ dma_addr_t omap_get_dma_src_pos(int lch)
 			offset = p->dma_read(CSSA, lch);
 	}
 
-	if (cpu_class_is_omap1())
+	if (dma_omap1())
 		offset |= (p->dma_read(CSSA, lch) & 0xFFFF0000);
 
 	return offset;
@@ -1084,7 +1087,7 @@ dma_addr_t omap_get_dma_dst_pos(int lch)
 {
 	dma_addr_t offset = 0;
 
-	if (cpu_is_omap15xx())
+	if (dma_omap15xx())
 		offset = p->dma_read(CPC, lch);
 	else
 		offset = p->dma_read(CDAC, lch);
@@ -1093,7 +1096,7 @@ dma_addr_t omap_get_dma_dst_pos(int lch)
 	 * omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
 	 * read before the DMA controller finished disabling the channel.
 	 */
-	if (!cpu_is_omap15xx() && offset == 0) {
+	if (!dma_omap15xx() && offset == 0) {
 		offset = p->dma_read(CDAC, lch);
 		/*
 		 * CDAC == 0 indicates that the DMA transfer on the channel has
@@ -1104,7 +1107,7 @@ dma_addr_t omap_get_dma_dst_pos(int lch)
 			offset = p->dma_read(CDSA, lch);
 	}
 
-	if (cpu_class_is_omap1())
+	if (dma_omap1())
 		offset |= (p->dma_read(CDSA, lch) & 0xFFFF0000);
 
 	return offset;
@@ -1121,7 +1124,7 @@ int omap_dma_running(void)
 {
 	int lch;
 
-	if (cpu_class_is_omap1())
+	if (dma_omap1())
 		if (omap_lcd_dma_running())
 			return 1;
 
@@ -2024,7 +2027,7 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev)
 	dma_chan		= d->chan;
 	enable_1510_mode	= d->dev_caps & ENABLE_1510_MODE;
 
-	if (cpu_class_is_omap2()) {
+	if (dma_omap2plus()) {
 		dma_linked_lch = kzalloc(sizeof(struct dma_link_info) *
 						dma_lch_count, GFP_KERNEL);
 		if (!dma_linked_lch) {
@@ -2036,7 +2039,7 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev)
 	spin_lock_init(&dma_chan_lock);
 	for (ch = 0; ch < dma_chan_count; ch++) {
 		omap_clear_dma(ch);
-		if (cpu_class_is_omap2())
+		if (dma_omap2plus())
 			omap2_disable_irq_lch(ch);
 
 		dma_chan[ch].dev_id = -1;
@@ -2045,7 +2048,7 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev)
 		if (ch >= 6 && enable_1510_mode)
 			continue;
 
-		if (cpu_class_is_omap1()) {
+		if (dma_omap1()) {
 			/*
 			 * request_irq() doesn't like dev_id (ie. ch) being
 			 * zero, so we have to kludge around this.
@@ -2070,11 +2073,11 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev)
 		}
 	}
 
-	if (cpu_class_is_omap2() && !cpu_is_omap242x())
+	if (d->dev_caps & IS_RW_PRIORITY)
 		omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE,
 				DMA_DEFAULT_FIFO_DEPTH, 0);
 
-	if (cpu_class_is_omap2()) {
+	if (dma_omap2plus()) {
 		strcpy(irq_name, "0");
 		dma_irq = platform_get_irq_byname(pdev, irq_name);
 		if (dma_irq < 0) {
@@ -2089,9 +2092,8 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev)
 		}
 	}
 
-	/* reserve dma channels 0 and 1 in high security devices */
-	if (cpu_is_omap34xx() &&
-		(omap_type() != OMAP2_DEVICE_TYPE_GP)) {
+	/* reserve dma channels 0 and 1 in high security devices on 34xx */
+	if (d->dev_caps & HS_CHANNELS_RESERVED) {
 		pr_info("Reserving DMA channels 0 and 1 for HS ROM code\n");
 		dma_chan[0].dev_id = 0;
 		dma_chan[1].dev_id = 1;
@@ -2118,7 +2120,7 @@ static int __devexit omap_system_dma_remove(struct platform_device *pdev)
 {
 	int dma_irq;
 
-	if (cpu_class_is_omap2()) {
+	if (dma_omap2plus()) {
 		char irq_name[4];
 		strcpy(irq_name, "0");
 		dma_irq = platform_get_irq_byname(pdev, irq_name);
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 938b50a33439..82231a75abd6 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -42,9 +42,6 @@
 #include <linux/pm_runtime.h>
 
 #include <plat/dmtimer.h>
-#include <plat/omap-pm.h>
-
-#include <mach/hardware.h>
 
 static u32 omap_reserved_systimers;
 static LIST_HEAD(omap_timer_list);
@@ -271,7 +268,7 @@ int omap_dm_timer_get_irq(struct omap_dm_timer *timer)
 EXPORT_SYMBOL_GPL(omap_dm_timer_get_irq);
 
 #if defined(CONFIG_ARCH_OMAP1)
-
+#include <mach/hardware.h>
 /**
  * omap_dm_timer_modify_idlect_mask - Check if any running timers use ARMXOR
  * @inputmask: current value of idlect mask
@@ -348,7 +345,8 @@ int omap_dm_timer_start(struct omap_dm_timer *timer)
 	omap_dm_timer_enable(timer);
 
 	if (!(timer->capability & OMAP_TIMER_ALWON)) {
-		if (omap_pm_get_dev_context_loss_count(&timer->pdev->dev) !=
+		if (timer->get_context_loss_count &&
+			timer->get_context_loss_count(&timer->pdev->dev) !=
 				timer->ctx_loss_count)
 			omap_timer_restore_context(timer);
 	}
@@ -377,9 +375,11 @@ int omap_dm_timer_stop(struct omap_dm_timer *timer)
 
 	__omap_dm_timer_stop(timer, timer->posted, rate);
 
-	if (!(timer->capability & OMAP_TIMER_ALWON))
-		timer->ctx_loss_count =
-			omap_pm_get_dev_context_loss_count(&timer->pdev->dev);
+	if (!(timer->capability & OMAP_TIMER_ALWON)) {
+		if (timer->get_context_loss_count)
+			timer->ctx_loss_count =
+				timer->get_context_loss_count(&timer->pdev->dev);
+	}
 
 	/*
 	 * Since the register values are computed and written within
@@ -495,7 +495,8 @@ int omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload,
 	omap_dm_timer_enable(timer);
 
 	if (!(timer->capability & OMAP_TIMER_ALWON)) {
-		if (omap_pm_get_dev_context_loss_count(&timer->pdev->dev) !=
+		if (timer->get_context_loss_count &&
+			timer->get_context_loss_count(&timer->pdev->dev) !=
 				timer->ctx_loss_count)
 			omap_timer_restore_context(timer);
 	}
@@ -729,6 +730,7 @@ static int __devinit omap_dm_timer_probe(struct platform_device *pdev)
 	timer->reserved = omap_dm_timer_reserved_systimer(timer->id);
 	timer->pdev = pdev;
 	timer->capability = pdata->timer_capability;
+	timer->get_context_loss_count = pdata->get_context_loss_count;
 
 	/* Skip pm_runtime_enable for OMAP1 */
 	if (!(timer->capability & OMAP_TIMER_NEEDS_RESET)) {
diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
index bcbb9d5dc293..3a77b30f53d4 100644
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/plat-omap/fb.c
@@ -30,9 +30,69 @@
 #include <linux/io.h>
 #include <linux/omapfb.h>
 
-#include <mach/hardware.h>
 #include <asm/mach/map.h>
 
+#include <plat/cpu.h>
+
+#ifdef CONFIG_OMAP2_VRFB
+
+/*
+ * The first memory resource is the register region for VRFB,
+ * the rest are VRFB virtual memory areas for each VRFB context.
+ */
+
+static const struct resource omap2_vrfb_resources[] = {
+	DEFINE_RES_MEM_NAMED(0x68008000u, 0x40, "vrfb-regs"),
+	DEFINE_RES_MEM_NAMED(0x70000000u, 0x4000000, "vrfb-area-0"),
+	DEFINE_RES_MEM_NAMED(0x74000000u, 0x4000000, "vrfb-area-1"),
+	DEFINE_RES_MEM_NAMED(0x78000000u, 0x4000000, "vrfb-area-2"),
+	DEFINE_RES_MEM_NAMED(0x7c000000u, 0x4000000, "vrfb-area-3"),
+};
+
+static const struct resource omap3_vrfb_resources[] = {
+	DEFINE_RES_MEM_NAMED(0x6C000180u, 0xc0, "vrfb-regs"),
+	DEFINE_RES_MEM_NAMED(0x70000000u, 0x4000000, "vrfb-area-0"),
+	DEFINE_RES_MEM_NAMED(0x74000000u, 0x4000000, "vrfb-area-1"),
+	DEFINE_RES_MEM_NAMED(0x78000000u, 0x4000000, "vrfb-area-2"),
+	DEFINE_RES_MEM_NAMED(0x7c000000u, 0x4000000, "vrfb-area-3"),
+	DEFINE_RES_MEM_NAMED(0xe0000000u, 0x4000000, "vrfb-area-4"),
+	DEFINE_RES_MEM_NAMED(0xe4000000u, 0x4000000, "vrfb-area-5"),
+	DEFINE_RES_MEM_NAMED(0xe8000000u, 0x4000000, "vrfb-area-6"),
+	DEFINE_RES_MEM_NAMED(0xec000000u, 0x4000000, "vrfb-area-7"),
+	DEFINE_RES_MEM_NAMED(0xf0000000u, 0x4000000, "vrfb-area-8"),
+	DEFINE_RES_MEM_NAMED(0xf4000000u, 0x4000000, "vrfb-area-9"),
+	DEFINE_RES_MEM_NAMED(0xf8000000u, 0x4000000, "vrfb-area-10"),
+	DEFINE_RES_MEM_NAMED(0xfc000000u, 0x4000000, "vrfb-area-11"),
+};
+
+static int __init omap_init_vrfb(void)
+{
+	struct platform_device *pdev;
+	const struct resource *res;
+	unsigned int num_res;
+
+	if (cpu_is_omap24xx()) {
+		res = omap2_vrfb_resources;
+		num_res = ARRAY_SIZE(omap2_vrfb_resources);
+	} else if (cpu_is_omap34xx()) {
+		res = omap3_vrfb_resources;
+		num_res = ARRAY_SIZE(omap3_vrfb_resources);
+	} else {
+		return 0;
+	}
+
+	pdev = platform_device_register_resndata(NULL, "omapvrfb", -1,
+			res, num_res, NULL, 0);
+
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
+	else
+		return 0;
+}
+
+arch_initcall(omap_init_vrfb);
+#endif
+
 #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
 
 static bool omapfb_lcd_configured;
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index 6013831a043e..f9df624d108c 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -31,176 +31,13 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 
-#include <mach/irqs.h>
 #include <plat/i2c.h>
-#include <plat/omap-pm.h>
-#include <plat/omap_device.h>
 
-#define OMAP_I2C_SIZE		0x3f
-#define OMAP1_I2C_BASE		0xfffb3800
-#define OMAP1_INT_I2C		(32 + 4)
-
-static const char name[] = "omap_i2c";
-
-#define I2C_RESOURCE_BUILDER(base, irq)			\
-	{						\
-		.start	= (base),			\
-		.end	= (base) + OMAP_I2C_SIZE,	\
-		.flags	= IORESOURCE_MEM,		\
-	},						\
-	{						\
-		.start	= (irq),			\
-		.flags	= IORESOURCE_IRQ,		\
-	},
-
-static struct resource i2c_resources[][2] = {
-	{ I2C_RESOURCE_BUILDER(0, 0) },
-};
-
-#define I2C_DEV_BUILDER(bus_id, res, data)		\
-	{						\
-		.id	= (bus_id),			\
-		.name	= name,				\
-		.num_resources	= ARRAY_SIZE(res),	\
-		.resource	= (res),		\
-		.dev		= {			\
-			.platform_data	= (data),	\
-		},					\
-	}
-
-#define MAX_OMAP_I2C_HWMOD_NAME_LEN	16
 #define OMAP_I2C_MAX_CONTROLLERS 4
 static struct omap_i2c_bus_platform_data i2c_pdata[OMAP_I2C_MAX_CONTROLLERS];
-static struct platform_device omap_i2c_devices[] = {
-	I2C_DEV_BUILDER(1, i2c_resources[0], &i2c_pdata[0]),
-};
 
 #define OMAP_I2C_CMDLINE_SETUP	(BIT(31))
 
-static int __init omap_i2c_nr_ports(void)
-{
-	int ports = 0;
-
-	if (cpu_class_is_omap1())
-		ports = 1;
-	else if (cpu_is_omap24xx())
-		ports = 2;
-	else if (cpu_is_omap34xx())
-		ports = 3;
-	else if (cpu_is_omap44xx())
-		ports = 4;
-
-	return ports;
-}
-
-static inline int omap1_i2c_add_bus(int bus_id)
-{
-	struct platform_device *pdev;
-	struct omap_i2c_bus_platform_data *pdata;
-	struct resource *res;
-
-	omap1_i2c_mux_pins(bus_id);
-
-	pdev = &omap_i2c_devices[bus_id - 1];
-	res = pdev->resource;
-	res[0].start = OMAP1_I2C_BASE;
-	res[0].end = res[0].start + OMAP_I2C_SIZE;
-	res[1].start = OMAP1_INT_I2C;
-	pdata = &i2c_pdata[bus_id - 1];
-
-	/* all OMAP1 have IP version 1 register set */
-	pdata->rev = OMAP_I2C_IP_VERSION_1;
-
-	/* all OMAP1 I2C are implemented like this */
-	pdata->flags = OMAP_I2C_FLAG_NO_FIFO |
-		       OMAP_I2C_FLAG_SIMPLE_CLOCK |
-		       OMAP_I2C_FLAG_16BIT_DATA_REG |
-		       OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK;
-
-	/* how the cpu bus is wired up differs for 7xx only */
-
-	if (cpu_is_omap7xx())
-		pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_1;
-	else
-		pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2;
-
-	return platform_device_register(pdev);
-}
-
-
-#ifdef CONFIG_ARCH_OMAP2PLUS
-/*
- * XXX This function is a temporary compatibility wrapper - only
- * needed until the I2C driver can be converted to call
- * omap_pm_set_max_dev_wakeup_lat() and handle a return code.
- */
-static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t)
-{
-	omap_pm_set_max_mpu_wakeup_lat(dev, t);
-}
-
-static inline int omap2_i2c_add_bus(int bus_id)
-{
-	int l;
-	struct omap_hwmod *oh;
-	struct platform_device *pdev;
-	char oh_name[MAX_OMAP_I2C_HWMOD_NAME_LEN];
-	struct omap_i2c_bus_platform_data *pdata;
-	struct omap_i2c_dev_attr *dev_attr;
-
-	omap2_i2c_mux_pins(bus_id);
-
-	l = snprintf(oh_name, MAX_OMAP_I2C_HWMOD_NAME_LEN, "i2c%d", bus_id);
-	WARN(l >= MAX_OMAP_I2C_HWMOD_NAME_LEN,
-		"String buffer overflow in I2C%d device setup\n", bus_id);
-	oh = omap_hwmod_lookup(oh_name);
-	if (!oh) {
-			pr_err("Could not look up %s\n", oh_name);
-			return -EEXIST;
-	}
-
-	pdata = &i2c_pdata[bus_id - 1];
-	/*
-	 * pass the hwmod class's CPU-specific knowledge of I2C IP revision in
-	 * use, and functionality implementation flags, up to the OMAP I2C
-	 * driver via platform data
-	 */
-	pdata->rev = oh->class->rev;
-
-	dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr;
-	pdata->flags = dev_attr->flags;
-
-	/*
-	 * When waiting for completion of a i2c transfer, we need to
-	 * set a wake up latency constraint for the MPU. This is to
-	 * ensure quick enough wakeup from idle, when transfer
-	 * completes.
-	 * Only omap3 has support for constraints
-	 */
-	if (cpu_is_omap34xx())
-		pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat;
-	pdev = omap_device_build(name, bus_id, oh, pdata,
-			sizeof(struct omap_i2c_bus_platform_data),
-			NULL, 0, 0);
-	WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name);
-
-	return PTR_RET(pdev);
-}
-#else
-static inline int omap2_i2c_add_bus(int bus_id)
-{
-	return 0;
-}
-#endif
-
-static int __init omap_i2c_add_bus(int bus_id)
-{
-	if (cpu_class_is_omap1())
-		return omap1_i2c_add_bus(bus_id);
-	else
-		return omap2_i2c_add_bus(bus_id);
-}
-
 /**
  * omap_i2c_bus_setup - Process command line options for the I2C bus speed
  * @str: String of options
@@ -214,12 +51,11 @@ static int __init omap_i2c_add_bus(int bus_id)
  */
 static int __init omap_i2c_bus_setup(char *str)
 {
-	int ports;
 	int ints[3];
 
-	ports = omap_i2c_nr_ports();
 	get_options(str, 3, ints);
-	if (ints[0] < 2 || ints[1] < 1 || ints[1] > ports)
+	if (ints[0] < 2 || ints[1] < 1 ||
+			ints[1] > OMAP_I2C_MAX_CONTROLLERS)
 		return 0;
 	i2c_pdata[ints[1] - 1].clkrate = ints[2];
 	i2c_pdata[ints[1] - 1].clkrate |= OMAP_I2C_CMDLINE_SETUP;
@@ -239,7 +75,7 @@ static int __init omap_register_i2c_bus_cmdline(void)
 	for (i = 0; i < ARRAY_SIZE(i2c_pdata); i++)
 		if (i2c_pdata[i].clkrate & OMAP_I2C_CMDLINE_SETUP) {
 			i2c_pdata[i].clkrate &= ~OMAP_I2C_CMDLINE_SETUP;
-			err = omap_i2c_add_bus(i + 1);
+			err = omap_i2c_add_bus(&i2c_pdata[i], i + 1);
 			if (err)
 				goto out;
 		}
@@ -264,7 +100,7 @@ int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
 {
 	int err;
 
-	BUG_ON(bus_id < 1 || bus_id > omap_i2c_nr_ports());
+	BUG_ON(bus_id < 1 || bus_id > OMAP_I2C_MAX_CONTROLLERS);
 
 	if (info) {
 		err = i2c_register_board_info(bus_id, info, len);
@@ -277,5 +113,5 @@ int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
 
 	i2c_pdata[bus_id - 1].clkrate &= ~OMAP_I2C_CMDLINE_SETUP;
 
-	return omap_i2c_add_bus(bus_id);
+	return omap_i2c_add_bus(&i2c_pdata[bus_id - 1], bus_id);
 }
diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat-omap/dma-omap.h
index 0a87b052f8f7..6f506ba9e453 100644
--- a/arch/arm/plat-omap/include/plat/dma.h
+++ b/arch/arm/plat-omap/include/plat-omap/dma-omap.h
@@ -1,5 +1,5 @@
 /*
- *  arch/arm/plat-omap/include/mach/dma.h
+ *  OMAP DMA handling defines and function
  *
  *  Copyright (C) 2003 Nokia Corporation
  *  Author: Juha Yrjölä <juha.yrjola@nokia.com>
@@ -23,187 +23,8 @@
 
 #include <linux/platform_device.h>
 
-/*
- * TODO: These dma channel defines should go away once all
- * the omap drivers hwmod adapted.
- */
-
-/* Move omap4 specific defines to dma-44xx.h */
-#include "dma-44xx.h"
-
 #define INT_DMA_LCD			25
 
-/* DMA channels for omap1 */
-#define OMAP_DMA_NO_DEVICE		0
-#define OMAP_DMA_MCSI1_TX		1
-#define OMAP_DMA_MCSI1_RX		2
-#define OMAP_DMA_I2C_RX			3
-#define OMAP_DMA_I2C_TX			4
-#define OMAP_DMA_EXT_NDMA_REQ		5
-#define OMAP_DMA_EXT_NDMA_REQ2		6
-#define OMAP_DMA_UWIRE_TX		7
-#define OMAP_DMA_MCBSP1_TX		8
-#define OMAP_DMA_MCBSP1_RX		9
-#define OMAP_DMA_MCBSP3_TX		10
-#define OMAP_DMA_MCBSP3_RX		11
-#define OMAP_DMA_UART1_TX		12
-#define OMAP_DMA_UART1_RX		13
-#define OMAP_DMA_UART2_TX		14
-#define OMAP_DMA_UART2_RX		15
-#define OMAP_DMA_MCBSP2_TX		16
-#define OMAP_DMA_MCBSP2_RX		17
-#define OMAP_DMA_UART3_TX		18
-#define OMAP_DMA_UART3_RX		19
-#define OMAP_DMA_CAMERA_IF_RX		20
-#define OMAP_DMA_MMC_TX			21
-#define OMAP_DMA_MMC_RX			22
-#define OMAP_DMA_NAND			23
-#define OMAP_DMA_IRQ_LCD_LINE		24
-#define OMAP_DMA_MEMORY_STICK		25
-#define OMAP_DMA_USB_W2FC_RX0		26
-#define OMAP_DMA_USB_W2FC_RX1		27
-#define OMAP_DMA_USB_W2FC_RX2		28
-#define OMAP_DMA_USB_W2FC_TX0		29
-#define OMAP_DMA_USB_W2FC_TX1		30
-#define OMAP_DMA_USB_W2FC_TX2		31
-
-/* These are only for 1610 */
-#define OMAP_DMA_CRYPTO_DES_IN		32
-#define OMAP_DMA_SPI_TX			33
-#define OMAP_DMA_SPI_RX			34
-#define OMAP_DMA_CRYPTO_HASH		35
-#define OMAP_DMA_CCP_ATTN		36
-#define OMAP_DMA_CCP_FIFO_NOT_EMPTY	37
-#define OMAP_DMA_CMT_APE_TX_CHAN_0	38
-#define OMAP_DMA_CMT_APE_RV_CHAN_0	39
-#define OMAP_DMA_CMT_APE_TX_CHAN_1	40
-#define OMAP_DMA_CMT_APE_RV_CHAN_1	41
-#define OMAP_DMA_CMT_APE_TX_CHAN_2	42
-#define OMAP_DMA_CMT_APE_RV_CHAN_2	43
-#define OMAP_DMA_CMT_APE_TX_CHAN_3	44
-#define OMAP_DMA_CMT_APE_RV_CHAN_3	45
-#define OMAP_DMA_CMT_APE_TX_CHAN_4	46
-#define OMAP_DMA_CMT_APE_RV_CHAN_4	47
-#define OMAP_DMA_CMT_APE_TX_CHAN_5	48
-#define OMAP_DMA_CMT_APE_RV_CHAN_5	49
-#define OMAP_DMA_CMT_APE_TX_CHAN_6	50
-#define OMAP_DMA_CMT_APE_RV_CHAN_6	51
-#define OMAP_DMA_CMT_APE_TX_CHAN_7	52
-#define OMAP_DMA_CMT_APE_RV_CHAN_7	53
-#define OMAP_DMA_MMC2_TX		54
-#define OMAP_DMA_MMC2_RX		55
-#define OMAP_DMA_CRYPTO_DES_OUT		56
-
-/* DMA channels for 24xx */
-#define OMAP24XX_DMA_NO_DEVICE		0
-#define OMAP24XX_DMA_XTI_DMA		1	/* S_DMA_0 */
-#define OMAP24XX_DMA_EXT_DMAREQ0	2	/* S_DMA_1 */
-#define OMAP24XX_DMA_EXT_DMAREQ1	3	/* S_DMA_2 */
-#define OMAP24XX_DMA_GPMC		4	/* S_DMA_3 */
-#define OMAP24XX_DMA_GFX		5	/* S_DMA_4 */
-#define OMAP24XX_DMA_DSS		6	/* S_DMA_5 */
-#define OMAP242X_DMA_VLYNQ_TX		7	/* S_DMA_6 */
-#define OMAP24XX_DMA_EXT_DMAREQ2	7	/* S_DMA_6 */
-#define OMAP24XX_DMA_CWT		8	/* S_DMA_7 */
-#define OMAP24XX_DMA_AES_TX		9	/* S_DMA_8 */
-#define OMAP24XX_DMA_AES_RX		10	/* S_DMA_9 */
-#define OMAP24XX_DMA_DES_TX		11	/* S_DMA_10 */
-#define OMAP24XX_DMA_DES_RX		12	/* S_DMA_11 */
-#define OMAP24XX_DMA_SHA1MD5_RX		13	/* S_DMA_12 */
-#define OMAP34XX_DMA_SHA2MD5_RX		13	/* S_DMA_12 */
-#define OMAP242X_DMA_EXT_DMAREQ2	14	/* S_DMA_13 */
-#define OMAP242X_DMA_EXT_DMAREQ3	15	/* S_DMA_14 */
-#define OMAP242X_DMA_EXT_DMAREQ4	16	/* S_DMA_15 */
-#define OMAP242X_DMA_EAC_AC_RD		17	/* S_DMA_16 */
-#define OMAP242X_DMA_EAC_AC_WR		18	/* S_DMA_17 */
-#define OMAP242X_DMA_EAC_MD_UL_RD	19	/* S_DMA_18 */
-#define OMAP242X_DMA_EAC_MD_UL_WR	20	/* S_DMA_19 */
-#define OMAP242X_DMA_EAC_MD_DL_RD	21	/* S_DMA_20 */
-#define OMAP242X_DMA_EAC_MD_DL_WR	22	/* S_DMA_21 */
-#define OMAP242X_DMA_EAC_BT_UL_RD	23	/* S_DMA_22 */
-#define OMAP242X_DMA_EAC_BT_UL_WR	24	/* S_DMA_23 */
-#define OMAP242X_DMA_EAC_BT_DL_RD	25	/* S_DMA_24 */
-#define OMAP242X_DMA_EAC_BT_DL_WR	26	/* S_DMA_25 */
-#define OMAP243X_DMA_EXT_DMAREQ3	14	/* S_DMA_13 */
-#define OMAP24XX_DMA_SPI3_TX0		15	/* S_DMA_14 */
-#define OMAP24XX_DMA_SPI3_RX0		16	/* S_DMA_15 */
-#define OMAP24XX_DMA_MCBSP3_TX		17	/* S_DMA_16 */
-#define OMAP24XX_DMA_MCBSP3_RX		18	/* S_DMA_17 */
-#define OMAP24XX_DMA_MCBSP4_TX		19	/* S_DMA_18 */
-#define OMAP24XX_DMA_MCBSP4_RX		20	/* S_DMA_19 */
-#define OMAP24XX_DMA_MCBSP5_TX		21	/* S_DMA_20 */
-#define OMAP24XX_DMA_MCBSP5_RX		22	/* S_DMA_21 */
-#define OMAP24XX_DMA_SPI3_TX1		23	/* S_DMA_22 */
-#define OMAP24XX_DMA_SPI3_RX1		24	/* S_DMA_23 */
-#define OMAP243X_DMA_EXT_DMAREQ4	25	/* S_DMA_24 */
-#define OMAP243X_DMA_EXT_DMAREQ5	26	/* S_DMA_25 */
-#define OMAP34XX_DMA_I2C3_TX		25	/* S_DMA_24 */
-#define OMAP34XX_DMA_I2C3_RX		26	/* S_DMA_25 */
-#define OMAP24XX_DMA_I2C1_TX		27	/* S_DMA_26 */
-#define OMAP24XX_DMA_I2C1_RX		28	/* S_DMA_27 */
-#define OMAP24XX_DMA_I2C2_TX		29	/* S_DMA_28 */
-#define OMAP24XX_DMA_I2C2_RX		30	/* S_DMA_29 */
-#define OMAP24XX_DMA_MCBSP1_TX		31	/* S_DMA_30 */
-#define OMAP24XX_DMA_MCBSP1_RX		32	/* S_DMA_31 */
-#define OMAP24XX_DMA_MCBSP2_TX		33	/* S_DMA_32 */
-#define OMAP24XX_DMA_MCBSP2_RX		34	/* S_DMA_33 */
-#define OMAP24XX_DMA_SPI1_TX0		35	/* S_DMA_34 */
-#define OMAP24XX_DMA_SPI1_RX0		36	/* S_DMA_35 */
-#define OMAP24XX_DMA_SPI1_TX1		37	/* S_DMA_36 */
-#define OMAP24XX_DMA_SPI1_RX1		38	/* S_DMA_37 */
-#define OMAP24XX_DMA_SPI1_TX2		39	/* S_DMA_38 */
-#define OMAP24XX_DMA_SPI1_RX2		40	/* S_DMA_39 */
-#define OMAP24XX_DMA_SPI1_TX3		41	/* S_DMA_40 */
-#define OMAP24XX_DMA_SPI1_RX3		42	/* S_DMA_41 */
-#define OMAP24XX_DMA_SPI2_TX0		43	/* S_DMA_42 */
-#define OMAP24XX_DMA_SPI2_RX0		44	/* S_DMA_43 */
-#define OMAP24XX_DMA_SPI2_TX1		45	/* S_DMA_44 */
-#define OMAP24XX_DMA_SPI2_RX1		46	/* S_DMA_45 */
-#define OMAP24XX_DMA_MMC2_TX		47	/* S_DMA_46 */
-#define OMAP24XX_DMA_MMC2_RX		48	/* S_DMA_47 */
-#define OMAP24XX_DMA_UART1_TX		49	/* S_DMA_48 */
-#define OMAP24XX_DMA_UART1_RX		50	/* S_DMA_49 */
-#define OMAP24XX_DMA_UART2_TX		51	/* S_DMA_50 */
-#define OMAP24XX_DMA_UART2_RX		52	/* S_DMA_51 */
-#define OMAP24XX_DMA_UART3_TX		53	/* S_DMA_52 */
-#define OMAP24XX_DMA_UART3_RX		54	/* S_DMA_53 */
-#define OMAP24XX_DMA_USB_W2FC_TX0	55	/* S_DMA_54 */
-#define OMAP24XX_DMA_USB_W2FC_RX0	56	/* S_DMA_55 */
-#define OMAP24XX_DMA_USB_W2FC_TX1	57	/* S_DMA_56 */
-#define OMAP24XX_DMA_USB_W2FC_RX1	58	/* S_DMA_57 */
-#define OMAP24XX_DMA_USB_W2FC_TX2	59	/* S_DMA_58 */
-#define OMAP24XX_DMA_USB_W2FC_RX2	60	/* S_DMA_59 */
-#define OMAP24XX_DMA_MMC1_TX		61	/* S_DMA_60 */
-#define OMAP24XX_DMA_MMC1_RX		62	/* S_DMA_61 */
-#define OMAP24XX_DMA_MS			63	/* S_DMA_62 */
-#define OMAP242X_DMA_EXT_DMAREQ5	64	/* S_DMA_63 */
-#define OMAP243X_DMA_EXT_DMAREQ6	64	/* S_DMA_63 */
-#define OMAP34XX_DMA_EXT_DMAREQ3	64	/* S_DMA_63 */
-#define OMAP34XX_DMA_AES2_TX		65	/* S_DMA_64 */
-#define OMAP34XX_DMA_AES2_RX		66	/* S_DMA_65 */
-#define OMAP34XX_DMA_DES2_TX		67	/* S_DMA_66 */
-#define OMAP34XX_DMA_DES2_RX		68	/* S_DMA_67 */
-#define OMAP34XX_DMA_SHA1MD5_RX		69	/* S_DMA_68 */
-#define OMAP34XX_DMA_SPI4_TX0		70	/* S_DMA_69 */
-#define OMAP34XX_DMA_SPI4_RX0		71	/* S_DMA_70 */
-#define OMAP34XX_DSS_DMA0		72	/* S_DMA_71 */
-#define OMAP34XX_DSS_DMA1		73	/* S_DMA_72 */
-#define OMAP34XX_DSS_DMA2		74	/* S_DMA_73 */
-#define OMAP34XX_DSS_DMA3		75	/* S_DMA_74 */
-#define OMAP34XX_DMA_MMC3_TX		77	/* S_DMA_76 */
-#define OMAP34XX_DMA_MMC3_RX		78	/* S_DMA_77 */
-#define OMAP34XX_DMA_USIM_TX		79	/* S_DMA_78 */
-#define OMAP34XX_DMA_USIM_RX		80	/* S_DMA_79 */
-
-#define OMAP36XX_DMA_UART4_TX		81	/* S_DMA_80 */
-#define OMAP36XX_DMA_UART4_RX		82	/* S_DMA_81 */
-
-/* Only for AM35xx */
-#define AM35XX_DMA_UART4_TX		54
-#define AM35XX_DMA_UART4_RX		55
-
-/*----------------------------------------------------------------------------*/
-
 #define OMAP1_DMA_TOUT_IRQ		(1 << 0)
 #define OMAP_DMA_DROP_IRQ		(1 << 1)
 #define OMAP_DMA_HALF_IRQ		(1 << 2)
@@ -309,10 +130,12 @@
 #define SRC_PORT			BIT(0x7)
 #define DST_PORT			BIT(0x8)
 #define SRC_INDEX			BIT(0x9)
-#define DST_INDEX			BIT(0xA)
-#define IS_BURST_ONLY4			BIT(0xB)
-#define CLEAR_CSR_ON_READ		BIT(0xC)
-#define IS_WORD_16			BIT(0xD)
+#define DST_INDEX			BIT(0xa)
+#define IS_BURST_ONLY4			BIT(0xb)
+#define CLEAR_CSR_ON_READ		BIT(0xc)
+#define IS_WORD_16			BIT(0xd)
+#define ENABLE_16XX_MODE		BIT(0xe)
+#define HS_CHANNELS_RESERVED		BIT(0xf)
 
 /* Defines for DMA Capabilities */
 #define DMA_HAS_TRANSPARENT_CAPS	(0x1 << 18)
@@ -449,7 +272,15 @@ struct omap_system_dma_plat_info {
 	u32 (*dma_read)(int reg, int lch);
 };
 
-extern void __init omap_init_consistent_dma_size(void);
+#ifdef CONFIG_ARCH_OMAP2PLUS
+#define dma_omap2plus()	1
+#else
+#define dma_omap2plus()	0
+#endif
+#define dma_omap1()	(!dma_omap2plus())
+#define dma_omap15xx()	((dma_omap1() && (d->dev_caps & ENABLE_1510_MODE)))
+#define dma_omap16xx()	((dma_omap1() && (d->dev_caps & ENABLE_16XX_MODE)))
+
 extern void omap_set_dma_priority(int lch, int dst_port, int priority);
 extern int omap_request_dma(int dev_id, const char *dev_name,
 			void (*callback)(int lch, u16 ch_status, void *data),
diff --git a/arch/arm/plat-omap/include/plat/clkdev_omap.h b/arch/arm/plat-omap/include/plat/clkdev_omap.h
deleted file mode 100644
index 025d85a3ee86..000000000000
--- a/arch/arm/plat-omap/include/plat/clkdev_omap.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * clkdev <-> OMAP integration
- *
- * Russell King <linux@arm.linux.org.uk>
- *
- */
-
-#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_CLKDEV_OMAP_H
-#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_CLKDEV_OMAP_H
-
-#include <linux/clkdev.h>
-
-struct omap_clk {
-	u16				cpu;
-	struct clk_lookup		lk;
-};
-
-#define CLK(dev, con, ck, cp) 		\
-	{				\
-		 .cpu = cp,		\
-		.lk = {			\
-			.dev_id = dev,	\
-			.con_id = con,	\
-			.clk = ck,	\
-		},			\
-	}
-
-/* Platform flags for the clkdev-OMAP integration code */
-#define CK_310		(1 << 0)
-#define CK_7XX		(1 << 1)	/* 7xx, 850 */
-#define CK_1510		(1 << 2)
-#define CK_16XX		(1 << 3)	/* 16xx, 17xx, 5912 */
-#define CK_242X		(1 << 4)
-#define CK_243X		(1 << 5)	/* 243x, 253x */
-#define CK_3430ES1	(1 << 6)	/* 34xxES1 only */
-#define CK_3430ES2PLUS	(1 << 7)	/* 34xxES2, ES3, non-Sitara 35xx only */
-#define CK_AM35XX	(1 << 9)	/* Sitara AM35xx */
-#define CK_36XX		(1 << 10)	/* 36xx/37xx-specific clocks */
-#define CK_443X		(1 << 11)
-#define CK_TI816X	(1 << 12)
-#define CK_446X		(1 << 13)
-#define CK_AM33XX	(1 << 14)	/* AM33xx specific clocks */
-#define CK_1710		(1 << 15)	/* 1710 extra for rate selection */
-
-
-#define CK_34XX		(CK_3430ES1 | CK_3430ES2PLUS)
-#define CK_3XXX		(CK_34XX | CK_AM35XX | CK_36XX)
-
-
-#endif
-
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
deleted file mode 100644
index e2e2d045e428..000000000000
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ /dev/null
@@ -1,309 +0,0 @@
-/*
- * OMAP clock: data structure definitions, function prototypes, shared macros
- *
- * Copyright (C) 2004-2005, 2008-2010 Nokia Corporation
- * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_OMAP_CLOCK_H
-#define __ARCH_ARM_OMAP_CLOCK_H
-
-#include <linux/list.h>
-
-struct module;
-struct clk;
-struct clockdomain;
-
-/* Temporary, needed during the common clock framework conversion */
-#define __clk_get_name(clk)	(clk->name)
-#define __clk_get_parent(clk)	(clk->parent)
-#define __clk_get_rate(clk)	(clk->rate)
-
-/**
- * struct clkops - some clock function pointers
- * @enable: fn ptr that enables the current clock in hardware
- * @disable: fn ptr that enables the current clock in hardware
- * @find_idlest: function returning the IDLEST register for the clock's IP blk
- * @find_companion: function returning the "companion" clk reg for the clock
- * @allow_idle: fn ptr that enables autoidle for the current clock in hardware
- * @deny_idle: fn ptr that disables autoidle for the current clock in hardware
- *
- * A "companion" clk is an accompanying clock to the one being queried
- * that must be enabled for the IP module connected to the clock to
- * become accessible by the hardware.  Neither @find_idlest nor
- * @find_companion should be needed; that information is IP
- * block-specific; the hwmod code has been created to handle this, but
- * until hwmod data is ready and drivers have been converted to use PM
- * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and
- * @find_companion must, unfortunately, remain.
- */
-struct clkops {
-	int			(*enable)(struct clk *);
-	void			(*disable)(struct clk *);
-	void			(*find_idlest)(struct clk *, void __iomem **,
-					       u8 *, u8 *);
-	void			(*find_companion)(struct clk *, void __iomem **,
-						  u8 *);
-	void			(*allow_idle)(struct clk *);
-	void			(*deny_idle)(struct clk *);
-};
-
-#ifdef CONFIG_ARCH_OMAP2PLUS
-
-/* struct clksel_rate.flags possibilities */
-#define RATE_IN_242X		(1 << 0)
-#define RATE_IN_243X		(1 << 1)
-#define RATE_IN_3430ES1		(1 << 2)	/* 3430ES1 rates only */
-#define RATE_IN_3430ES2PLUS	(1 << 3)	/* 3430 ES >= 2 rates only */
-#define RATE_IN_36XX		(1 << 4)
-#define RATE_IN_4430		(1 << 5)
-#define RATE_IN_TI816X		(1 << 6)
-#define RATE_IN_4460		(1 << 7)
-#define RATE_IN_AM33XX		(1 << 8)
-#define RATE_IN_TI814X		(1 << 9)
-
-#define RATE_IN_24XX		(RATE_IN_242X | RATE_IN_243X)
-#define RATE_IN_34XX		(RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS)
-#define RATE_IN_3XXX		(RATE_IN_34XX | RATE_IN_36XX)
-#define RATE_IN_44XX		(RATE_IN_4430 | RATE_IN_4460)
-
-/* RATE_IN_3430ES2PLUS_36XX includes 34xx/35xx with ES >=2, and all 36xx/37xx */
-#define RATE_IN_3430ES2PLUS_36XX	(RATE_IN_3430ES2PLUS | RATE_IN_36XX)
-
-
-/**
- * struct clksel_rate - register bitfield values corresponding to clk divisors
- * @val: register bitfield value (shifted to bit 0)
- * @div: clock divisor corresponding to @val
- * @flags: (see "struct clksel_rate.flags possibilities" above)
- *
- * @val should match the value of a read from struct clk.clksel_reg
- * AND'ed with struct clk.clksel_mask, shifted right to bit 0.
- *
- * @div is the divisor that should be applied to the parent clock's rate
- * to produce the current clock's rate.
- */
-struct clksel_rate {
-	u32			val;
-	u8			div;
-	u16			flags;
-};
-
-/**
- * struct clksel - available parent clocks, and a pointer to their divisors
- * @parent: struct clk * to a possible parent clock
- * @rates: available divisors for this parent clock
- *
- * A struct clksel is always associated with one or more struct clks
- * and one or more struct clksel_rates.
- */
-struct clksel {
-	struct clk		 *parent;
-	const struct clksel_rate *rates;
-};
-
-/**
- * struct dpll_data - DPLL registers and integration data
- * @mult_div1_reg: register containing the DPLL M and N bitfields
- * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg
- * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg
- * @clk_bypass: struct clk pointer to the clock's bypass clock input
- * @clk_ref: struct clk pointer to the clock's reference clock input
- * @control_reg: register containing the DPLL mode bitfield
- * @enable_mask: mask of the DPLL mode bitfield in @control_reg
- * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate()
- * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate()
- * @max_multiplier: maximum valid non-bypass multiplier value (actual)
- * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate()
- * @min_divider: minimum valid non-bypass divider value (actual)
- * @max_divider: maximum valid non-bypass divider value (actual)
- * @modes: possible values of @enable_mask
- * @autoidle_reg: register containing the DPLL autoidle mode bitfield
- * @idlest_reg: register containing the DPLL idle status bitfield
- * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg
- * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg
- * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg
- * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg
- * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs
- * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs
- * @flags: DPLL type/features (see below)
- *
- * Possible values for @flags:
- * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs)
- *
- * @freqsel_mask is only used on the OMAP34xx family and AM35xx.
- *
- * XXX Some DPLLs have multiple bypass inputs, so it's not technically
- * correct to only have one @clk_bypass pointer.
- *
- * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m,
- * @last_rounded_n) should be separated from the runtime-fixed fields
- * and placed into a different structure, so that the runtime-fixed data
- * can be placed into read-only space.
- */
-struct dpll_data {
-	void __iomem		*mult_div1_reg;
-	u32			mult_mask;
-	u32			div1_mask;
-	struct clk		*clk_bypass;
-	struct clk		*clk_ref;
-	void __iomem		*control_reg;
-	u32			enable_mask;
-	unsigned long		last_rounded_rate;
-	u16			last_rounded_m;
-	u16			max_multiplier;
-	u8			last_rounded_n;
-	u8			min_divider;
-	u16			max_divider;
-	u8			modes;
-	void __iomem		*autoidle_reg;
-	void __iomem		*idlest_reg;
-	u32			autoidle_mask;
-	u32			freqsel_mask;
-	u32			idlest_mask;
-	u32			dco_mask;
-	u32			sddiv_mask;
-	u8			auto_recal_bit;
-	u8			recal_en_bit;
-	u8			recal_st_bit;
-	u8			flags;
-};
-
-#endif
-
-/*
- * struct clk.flags possibilities
- *
- * XXX document the rest of the clock flags here
- *
- * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
- *     bits share the same register.  This flag allows the
- *     omap4_dpllmx*() code to determine which GATE_CTRL bit field
- *     should be used.  This is a temporary solution - a better approach
- *     would be to associate clock type-specific data with the clock,
- *     similar to the struct dpll_data approach.
- */
-#define ENABLE_REG_32BIT	(1 << 0)	/* Use 32-bit access */
-#define CLOCK_IDLE_CONTROL	(1 << 1)
-#define CLOCK_NO_IDLE_PARENT	(1 << 2)
-#define ENABLE_ON_INIT		(1 << 3)	/* Enable upon framework init */
-#define INVERT_ENABLE		(1 << 4)	/* 0 enables, 1 disables */
-#define CLOCK_CLKOUTX2		(1 << 5)
-
-/**
- * struct clk - OMAP struct clk
- * @node: list_head connecting this clock into the full clock list
- * @ops: struct clkops * for this clock
- * @name: the name of the clock in the hardware (used in hwmod data and debug)
- * @parent: pointer to this clock's parent struct clk
- * @children: list_head connecting to the child clks' @sibling list_heads
- * @sibling: list_head connecting this clk to its parent clk's @children
- * @rate: current clock rate
- * @enable_reg: register to write to enable the clock (see @enable_bit)
- * @recalc: fn ptr that returns the clock's current rate
- * @set_rate: fn ptr that can change the clock's current rate
- * @round_rate: fn ptr that can round the clock's current rate
- * @init: fn ptr to do clock-specific initialization
- * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
- * @usecount: number of users that have requested this clock to be enabled
- * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div
- * @flags: see "struct clk.flags possibilities" above
- * @clksel_reg: for clksel clks, register va containing src/divisor select
- * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector
- * @clksel: for clksel clks, pointer to struct clksel for this clock
- * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock
- * @clkdm_name: clockdomain name that this clock is contained in
- * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime
- * @rate_offset: bitshift for rate selection bitfield (OMAP1 only)
- * @src_offset: bitshift for source selection bitfield (OMAP1 only)
- *
- * XXX @rate_offset, @src_offset should probably be removed and OMAP1
- * clock code converted to use clksel.
- *
- * XXX @usecount is poorly named.  It should be "enable_count" or
- * something similar.  "users" in the description refers to kernel
- * code (core code or drivers) that have called clk_enable() and not
- * yet called clk_disable(); the usecount of parent clocks is also
- * incremented by the clock code when clk_enable() is called on child
- * clocks and decremented by the clock code when clk_disable() is
- * called on child clocks.
- *
- * XXX @clkdm, @usecount, @children, @sibling should be marked for
- * internal use only.
- *
- * @children and @sibling are used to optimize parent-to-child clock
- * tree traversals.  (child-to-parent traversals use @parent.)
- *
- * XXX The notion of the clock's current rate probably needs to be
- * separated from the clock's target rate.
- */
-struct clk {
-	struct list_head	node;
-	const struct clkops	*ops;
-	const char		*name;
-	struct clk		*parent;
-	struct list_head	children;
-	struct list_head	sibling;	/* node for children */
-	unsigned long		rate;
-	void __iomem		*enable_reg;
-	unsigned long		(*recalc)(struct clk *);
-	int			(*set_rate)(struct clk *, unsigned long);
-	long			(*round_rate)(struct clk *, unsigned long);
-	void			(*init)(struct clk *);
-	u8			enable_bit;
-	s8			usecount;
-	u8			fixed_div;
-	u8			flags;
-#ifdef CONFIG_ARCH_OMAP2PLUS
-	void __iomem		*clksel_reg;
-	u32			clksel_mask;
-	const struct clksel	*clksel;
-	struct dpll_data	*dpll_data;
-	const char		*clkdm_name;
-	struct clockdomain	*clkdm;
-#else
-	u8			rate_offset;
-	u8			src_offset;
-#endif
-#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
-	struct dentry		*dent;	/* For visible tree hierarchy */
-#endif
-};
-
-struct clk_functions {
-	int		(*clk_enable)(struct clk *clk);
-	void		(*clk_disable)(struct clk *clk);
-	long		(*clk_round_rate)(struct clk *clk, unsigned long rate);
-	int		(*clk_set_rate)(struct clk *clk, unsigned long rate);
-	int		(*clk_set_parent)(struct clk *clk, struct clk *parent);
-	void		(*clk_allow_idle)(struct clk *clk);
-	void		(*clk_deny_idle)(struct clk *clk);
-	void		(*clk_disable_unused)(struct clk *clk);
-};
-
-extern int mpurate;
-
-extern int clk_init(struct clk_functions *custom_clocks);
-extern void clk_preinit(struct clk *clk);
-extern int clk_register(struct clk *clk);
-extern void clk_reparent(struct clk *child, struct clk *parent);
-extern void clk_unregister(struct clk *clk);
-extern void propagate_rate(struct clk *clk);
-extern void recalculate_root_clocks(void);
-extern unsigned long followparent_recalc(struct clk *clk);
-extern void clk_enable_init_clocks(void);
-unsigned long omap_fixed_divisor_recalc(struct clk *clk);
-extern struct clk *omap_clk_get_by_name(const char *name);
-extern int omap_clk_enable_autoidle_all(void);
-extern int omap_clk_disable_autoidle_all(void);
-
-extern const struct clkops clkops_null;
-
-extern struct clk dummy_ck;
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
deleted file mode 100644
index d1cb6f527b7e..000000000000
--- a/arch/arm/plat-omap/include/plat/common.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/common.h
- *
- * Header for code common to all OMAP machines.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H
-#define __ARCH_ARM_MACH_OMAP_COMMON_H
-
-#include <plat/i2c.h>
-#include <plat/omap_hwmod.h>
-
-extern int __init omap_init_clocksource_32k(void __iomem *vbase);
-
-extern void __init omap_check_revision(void);
-
-extern void omap_reserve(void);
-extern int omap_dss_reset(struct omap_hwmod *);
-
-void omap_sram_init(void);
-
-#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
diff --git a/arch/arm/plat-omap/include/plat/counter-32k.h b/arch/arm/plat-omap/include/plat/counter-32k.h
new file mode 100644
index 000000000000..da000d482ff2
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/counter-32k.h
@@ -0,0 +1 @@
+int omap_init_clocksource_32k(void __iomem *vbase);
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 67da857783ce..b4516aba67ed 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/plat-omap/include/mach/cpu.h
- *
  * OMAP cpu type detection
  *
  * Copyright (C) 2004, 2008 Nokia Corporation
@@ -30,470 +28,12 @@
 #ifndef __ASM_ARCH_OMAP_CPU_H
 #define __ASM_ARCH_OMAP_CPU_H
 
-#ifndef __ASSEMBLY__
-
-#include <linux/bitops.h>
-#include <plat/multi.h>
-
-/*
- * Omap device type i.e. EMU/HS/TST/GP/BAD
- */
-#define OMAP2_DEVICE_TYPE_TEST		0
-#define OMAP2_DEVICE_TYPE_EMU		1
-#define OMAP2_DEVICE_TYPE_SEC		2
-#define OMAP2_DEVICE_TYPE_GP		3
-#define OMAP2_DEVICE_TYPE_BAD		4
-
-int omap_type(void);
-
-/*
- * omap_rev bits:
- * CPU id bits	(0730, 1510, 1710, 2422...)	[31:16]
- * CPU revision	(See _REV_ defined in cpu.h)	[15:08]
- * CPU class bits (15xx, 16xx, 24xx, 34xx...)	[07:00]
- */
-unsigned int omap_rev(void);
-
-/*
- * Get the CPU revision for OMAP devices
- */
-#define GET_OMAP_REVISION()	((omap_rev() >> 8) & 0xff)
-
-/*
- * Macros to group OMAP into cpu classes.
- * These can be used in most places.
- * cpu_is_omap7xx():	True for OMAP730, OMAP850
- * cpu_is_omap15xx():	True for OMAP1510, OMAP5910 and OMAP310
- * cpu_is_omap16xx():	True for OMAP1610, OMAP5912 and OMAP1710
- * cpu_is_omap24xx():	True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
- * cpu_is_omap242x():	True for OMAP2420, OMAP2422, OMAP2423
- * cpu_is_omap243x():	True for OMAP2430
- * cpu_is_omap343x():	True for OMAP3430
- * cpu_is_omap443x():	True for OMAP4430
- * cpu_is_omap446x():	True for OMAP4460
- * cpu_is_omap447x():	True for OMAP4470
- * soc_is_omap543x():	True for OMAP5430, OMAP5432
- */
-#define GET_OMAP_CLASS	(omap_rev() & 0xff)
-
-#define IS_OMAP_CLASS(class, id)			\
-static inline int is_omap ##class (void)		\
-{							\
-	return (GET_OMAP_CLASS == (id)) ? 1 : 0;	\
-}
-
-#define GET_AM_CLASS	((omap_rev() >> 24) & 0xff)
-
-#define IS_AM_CLASS(class, id)				\
-static inline int is_am ##class (void)			\
-{							\
-	return (GET_AM_CLASS == (id)) ? 1 : 0;		\
-}
-
-#define GET_TI_CLASS	((omap_rev() >> 24) & 0xff)
-
-#define IS_TI_CLASS(class, id)			\
-static inline int is_ti ##class (void)		\
-{							\
-	return (GET_TI_CLASS == (id)) ? 1 : 0;	\
-}
-
-#define GET_OMAP_SUBCLASS	((omap_rev() >> 20) & 0x0fff)
-
-#define IS_OMAP_SUBCLASS(subclass, id)			\
-static inline int is_omap ##subclass (void)		\
-{							\
-	return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;	\
-}
-
-#define IS_TI_SUBCLASS(subclass, id)			\
-static inline int is_ti ##subclass (void)		\
-{							\
-	return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;	\
-}
-
-#define IS_AM_SUBCLASS(subclass, id)			\
-static inline int is_am ##subclass (void)		\
-{							\
-	return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;	\
-}
-
-IS_OMAP_CLASS(7xx, 0x07)
-IS_OMAP_CLASS(15xx, 0x15)
-IS_OMAP_CLASS(16xx, 0x16)
-IS_OMAP_CLASS(24xx, 0x24)
-IS_OMAP_CLASS(34xx, 0x34)
-IS_OMAP_CLASS(44xx, 0x44)
-IS_AM_CLASS(35xx, 0x35)
-IS_OMAP_CLASS(54xx, 0x54)
-IS_AM_CLASS(33xx, 0x33)
-
-IS_TI_CLASS(81xx, 0x81)
-
-IS_OMAP_SUBCLASS(242x, 0x242)
-IS_OMAP_SUBCLASS(243x, 0x243)
-IS_OMAP_SUBCLASS(343x, 0x343)
-IS_OMAP_SUBCLASS(363x, 0x363)
-IS_OMAP_SUBCLASS(443x, 0x443)
-IS_OMAP_SUBCLASS(446x, 0x446)
-IS_OMAP_SUBCLASS(447x, 0x447)
-IS_OMAP_SUBCLASS(543x, 0x543)
-
-IS_TI_SUBCLASS(816x, 0x816)
-IS_TI_SUBCLASS(814x, 0x814)
-IS_AM_SUBCLASS(335x, 0x335)
-
-#define cpu_is_omap7xx()		0
-#define cpu_is_omap15xx()		0
-#define cpu_is_omap16xx()		0
-#define cpu_is_omap24xx()		0
-#define cpu_is_omap242x()		0
-#define cpu_is_omap243x()		0
-#define cpu_is_omap34xx()		0
-#define cpu_is_omap343x()		0
-#define cpu_is_ti81xx()			0
-#define cpu_is_ti816x()			0
-#define cpu_is_ti814x()			0
-#define soc_is_am35xx()			0
-#define soc_is_am33xx()			0
-#define soc_is_am335x()			0
-#define cpu_is_omap44xx()		0
-#define cpu_is_omap443x()		0
-#define cpu_is_omap446x()		0
-#define cpu_is_omap447x()		0
-#define soc_is_omap54xx()		0
-#define soc_is_omap543x()		0
-
-#if defined(MULTI_OMAP1)
-# if defined(CONFIG_ARCH_OMAP730)
-#  undef  cpu_is_omap7xx
-#  define cpu_is_omap7xx()		is_omap7xx()
-# endif
-# if defined(CONFIG_ARCH_OMAP850)
-#  undef  cpu_is_omap7xx
-#  define cpu_is_omap7xx()		is_omap7xx()
-# endif
-# if defined(CONFIG_ARCH_OMAP15XX)
-#  undef  cpu_is_omap15xx
-#  define cpu_is_omap15xx()		is_omap15xx()
-# endif
-# if defined(CONFIG_ARCH_OMAP16XX)
-#  undef  cpu_is_omap16xx
-#  define cpu_is_omap16xx()		is_omap16xx()
-# endif
-#else
-# if defined(CONFIG_ARCH_OMAP730)
-#  undef  cpu_is_omap7xx
-#  define cpu_is_omap7xx()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP850)
-#  undef  cpu_is_omap7xx
-#  define cpu_is_omap7xx()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP15XX)
-#  undef  cpu_is_omap15xx
-#  define cpu_is_omap15xx()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP16XX)
-#  undef  cpu_is_omap16xx
-#  define cpu_is_omap16xx()		1
-# endif
-#endif
-
-#if defined(MULTI_OMAP2)
-# if defined(CONFIG_ARCH_OMAP2)
-#  undef  cpu_is_omap24xx
-#  define cpu_is_omap24xx()		is_omap24xx()
-# endif
-# if defined (CONFIG_SOC_OMAP2420)
-#  undef  cpu_is_omap242x
-#  define cpu_is_omap242x()		is_omap242x()
-# endif
-# if defined (CONFIG_SOC_OMAP2430)
-#  undef  cpu_is_omap243x
-#  define cpu_is_omap243x()		is_omap243x()
-# endif
-# if defined(CONFIG_ARCH_OMAP3)
-#  undef  cpu_is_omap34xx
-#  undef  cpu_is_omap343x
-#  define cpu_is_omap34xx()		is_omap34xx()
-#  define cpu_is_omap343x()		is_omap343x()
-# endif
-#else
-# if defined(CONFIG_ARCH_OMAP2)
-#  undef  cpu_is_omap24xx
-#  define cpu_is_omap24xx()		1
-# endif
-# if defined(CONFIG_SOC_OMAP2420)
-#  undef  cpu_is_omap242x
-#  define cpu_is_omap242x()		1
-# endif
-# if defined(CONFIG_SOC_OMAP2430)
-#  undef  cpu_is_omap243x
-#  define cpu_is_omap243x()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP3)
-#  undef  cpu_is_omap34xx
-#  define cpu_is_omap34xx()		1
-# endif
-# if defined(CONFIG_SOC_OMAP3430)
-#  undef  cpu_is_omap343x
-#  define cpu_is_omap343x()		1
-# endif
-#endif
-
-/*
- * Macros to detect individual cpu types.
- * These are only rarely needed.
- * cpu_is_omap310():	True for OMAP310
- * cpu_is_omap1510():	True for OMAP1510
- * cpu_is_omap1610():	True for OMAP1610
- * cpu_is_omap1611():	True for OMAP1611
- * cpu_is_omap5912():	True for OMAP5912
- * cpu_is_omap1621():	True for OMAP1621
- * cpu_is_omap1710():	True for OMAP1710
- * cpu_is_omap2420():	True for OMAP2420
- * cpu_is_omap2422():	True for OMAP2422
- * cpu_is_omap2423():	True for OMAP2423
- * cpu_is_omap2430():	True for OMAP2430
- * cpu_is_omap3430():	True for OMAP3430
- */
-#define GET_OMAP_TYPE	((omap_rev() >> 16) & 0xffff)
-
-#define IS_OMAP_TYPE(type, id)				\
-static inline int is_omap ##type (void)			\
-{							\
-	return (GET_OMAP_TYPE == (id)) ? 1 : 0;		\
-}
-
-IS_OMAP_TYPE(310, 0x0310)
-IS_OMAP_TYPE(1510, 0x1510)
-IS_OMAP_TYPE(1610, 0x1610)
-IS_OMAP_TYPE(1611, 0x1611)
-IS_OMAP_TYPE(5912, 0x1611)
-IS_OMAP_TYPE(1621, 0x1621)
-IS_OMAP_TYPE(1710, 0x1710)
-IS_OMAP_TYPE(2420, 0x2420)
-IS_OMAP_TYPE(2422, 0x2422)
-IS_OMAP_TYPE(2423, 0x2423)
-IS_OMAP_TYPE(2430, 0x2430)
-IS_OMAP_TYPE(3430, 0x3430)
-
-#define cpu_is_omap310()		0
-#define cpu_is_omap1510()		0
-#define cpu_is_omap1610()		0
-#define cpu_is_omap5912()		0
-#define cpu_is_omap1611()		0
-#define cpu_is_omap1621()		0
-#define cpu_is_omap1710()		0
-#define cpu_is_omap2420()		0
-#define cpu_is_omap2422()		0
-#define cpu_is_omap2423()		0
-#define cpu_is_omap2430()		0
-#define cpu_is_omap3430()		0
-#define cpu_is_omap3630()		0
-#define soc_is_omap5430()		0
-
-/*
- * Whether we have MULTI_OMAP1 or not, we still need to distinguish
- * between 310 vs. 1510 and 1611B/5912 vs. 1710.
- */
-
-#if defined(CONFIG_ARCH_OMAP15XX)
-# undef  cpu_is_omap310
-# undef  cpu_is_omap1510
-# define cpu_is_omap310()		is_omap310()
-# define cpu_is_omap1510()		is_omap1510()
-#endif
-
-#if defined(CONFIG_ARCH_OMAP16XX)
-# undef  cpu_is_omap1610
-# undef  cpu_is_omap1611
-# undef  cpu_is_omap5912
-# undef  cpu_is_omap1621
-# undef  cpu_is_omap1710
-# define cpu_is_omap1610()		is_omap1610()
-# define cpu_is_omap1611()		is_omap1611()
-# define cpu_is_omap5912()		is_omap5912()
-# define cpu_is_omap1621()		is_omap1621()
-# define cpu_is_omap1710()		is_omap1710()
-#endif
-
-#if defined(CONFIG_ARCH_OMAP2)
-# undef  cpu_is_omap2420
-# undef  cpu_is_omap2422
-# undef  cpu_is_omap2423
-# undef  cpu_is_omap2430
-# define cpu_is_omap2420()		is_omap2420()
-# define cpu_is_omap2422()		is_omap2422()
-# define cpu_is_omap2423()		is_omap2423()
-# define cpu_is_omap2430()		is_omap2430()
-#endif
-
-#if defined(CONFIG_ARCH_OMAP3)
-# undef cpu_is_omap3430
-# undef cpu_is_ti81xx
-# undef cpu_is_ti816x
-# undef cpu_is_ti814x
-# undef soc_is_am35xx
-# define cpu_is_omap3430()		is_omap3430()
-# undef cpu_is_omap3630
-# define cpu_is_omap3630()		is_omap363x()
-# define cpu_is_ti81xx()		is_ti81xx()
-# define cpu_is_ti816x()		is_ti816x()
-# define cpu_is_ti814x()		is_ti814x()
-# define soc_is_am35xx()		is_am35xx()
+#ifdef CONFIG_ARCH_OMAP1
+#include <mach/soc.h>
 #endif
 
-# if defined(CONFIG_SOC_AM33XX)
-# undef soc_is_am33xx
-# undef soc_is_am335x
-# define soc_is_am33xx()		is_am33xx()
-# define soc_is_am335x()		is_am335x()
+#ifdef CONFIG_ARCH_OMAP2PLUS
+#include "../../mach-omap2/soc.h"
 #endif
 
-# if defined(CONFIG_ARCH_OMAP4)
-# undef cpu_is_omap44xx
-# undef cpu_is_omap443x
-# undef cpu_is_omap446x
-# undef cpu_is_omap447x
-# define cpu_is_omap44xx()		is_omap44xx()
-# define cpu_is_omap443x()		is_omap443x()
-# define cpu_is_omap446x()		is_omap446x()
-# define cpu_is_omap447x()		is_omap447x()
-# endif
-
-# if defined(CONFIG_SOC_OMAP5)
-# undef soc_is_omap54xx
-# undef soc_is_omap543x
-# define soc_is_omap54xx()		is_omap54xx()
-# define soc_is_omap543x()		is_omap543x()
-#endif
-
-/* Macros to detect if we have OMAP1 or OMAP2 */
-#define cpu_class_is_omap1()	(cpu_is_omap7xx() || cpu_is_omap15xx() || \
-				cpu_is_omap16xx())
-#define cpu_class_is_omap2()	(cpu_is_omap24xx() || cpu_is_omap34xx() || \
-				cpu_is_omap44xx() || soc_is_omap54xx() || \
-				soc_is_am33xx())
-
-/* Various silicon revisions for omap2 */
-#define OMAP242X_CLASS		0x24200024
-#define OMAP2420_REV_ES1_0	OMAP242X_CLASS
-#define OMAP2420_REV_ES2_0	(OMAP242X_CLASS | (0x1 << 8))
-
-#define OMAP243X_CLASS		0x24300024
-#define OMAP2430_REV_ES1_0	OMAP243X_CLASS
-
-#define OMAP343X_CLASS		0x34300034
-#define OMAP3430_REV_ES1_0	OMAP343X_CLASS
-#define OMAP3430_REV_ES2_0	(OMAP343X_CLASS | (0x1 << 8))
-#define OMAP3430_REV_ES2_1	(OMAP343X_CLASS | (0x2 << 8))
-#define OMAP3430_REV_ES3_0	(OMAP343X_CLASS | (0x3 << 8))
-#define OMAP3430_REV_ES3_1	(OMAP343X_CLASS | (0x4 << 8))
-#define OMAP3430_REV_ES3_1_2	(OMAP343X_CLASS | (0x5 << 8))
-
-#define OMAP363X_CLASS		0x36300034
-#define OMAP3630_REV_ES1_0	OMAP363X_CLASS
-#define OMAP3630_REV_ES1_1	(OMAP363X_CLASS | (0x1 << 8))
-#define OMAP3630_REV_ES1_2	(OMAP363X_CLASS | (0x2 << 8))
-
-#define TI816X_CLASS		0x81600034
-#define TI8168_REV_ES1_0	TI816X_CLASS
-#define TI8168_REV_ES1_1	(TI816X_CLASS | (0x1 << 8))
-
-#define TI814X_CLASS		0x81400034
-#define TI8148_REV_ES1_0	TI814X_CLASS
-#define TI8148_REV_ES2_0	(TI814X_CLASS | (0x1 << 8))
-#define TI8148_REV_ES2_1	(TI814X_CLASS | (0x2 << 8))
-
-#define AM35XX_CLASS		0x35170034
-#define AM35XX_REV_ES1_0	AM35XX_CLASS
-#define AM35XX_REV_ES1_1	(AM35XX_CLASS | (0x1 << 8))
-
-#define AM335X_CLASS		0x33500033
-#define AM335X_REV_ES1_0	AM335X_CLASS
-
-#define OMAP443X_CLASS		0x44300044
-#define OMAP4430_REV_ES1_0	(OMAP443X_CLASS | (0x10 << 8))
-#define OMAP4430_REV_ES2_0	(OMAP443X_CLASS | (0x20 << 8))
-#define OMAP4430_REV_ES2_1	(OMAP443X_CLASS | (0x21 << 8))
-#define OMAP4430_REV_ES2_2	(OMAP443X_CLASS | (0x22 << 8))
-#define OMAP4430_REV_ES2_3	(OMAP443X_CLASS | (0x23 << 8))
-
-#define OMAP446X_CLASS		0x44600044
-#define OMAP4460_REV_ES1_0	(OMAP446X_CLASS | (0x10 << 8))
-#define OMAP4460_REV_ES1_1	(OMAP446X_CLASS | (0x11 << 8))
-
-#define OMAP447X_CLASS		0x44700044
-#define OMAP4470_REV_ES1_0	(OMAP447X_CLASS | (0x10 << 8))
-
-#define OMAP54XX_CLASS		0x54000054
-#define OMAP5430_REV_ES1_0	(OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8))
-#define OMAP5432_REV_ES1_0	(OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8))
-
-void omap2xxx_check_revision(void);
-void omap3xxx_check_revision(void);
-void omap4xxx_check_revision(void);
-void omap5xxx_check_revision(void);
-void omap3xxx_check_features(void);
-void ti81xx_check_features(void);
-void omap4xxx_check_features(void);
-
-/*
- * Runtime detection of OMAP3 features
- *
- * OMAP3_HAS_IO_CHAIN_CTRL: Some later members of the OMAP3 chip
- *    family have OS-level control over the I/O chain clock.  This is
- *    to avoid a window during which wakeups could potentially be lost
- *    during powerdomain transitions.  If this bit is set, it
- *    indicates that the chip does support OS-level control of this
- *    feature.
- */
-extern u32 omap_features;
-
-#define OMAP3_HAS_L2CACHE		BIT(0)
-#define OMAP3_HAS_IVA			BIT(1)
-#define OMAP3_HAS_SGX			BIT(2)
-#define OMAP3_HAS_NEON			BIT(3)
-#define OMAP3_HAS_ISP			BIT(4)
-#define OMAP3_HAS_192MHZ_CLK		BIT(5)
-#define OMAP3_HAS_IO_WAKEUP		BIT(6)
-#define OMAP3_HAS_SDRC			BIT(7)
-#define OMAP3_HAS_IO_CHAIN_CTRL		BIT(8)
-#define OMAP4_HAS_MPU_1GHZ		BIT(9)
-#define OMAP4_HAS_MPU_1_2GHZ		BIT(10)
-#define OMAP4_HAS_MPU_1_5GHZ		BIT(11)
-
-
-#define OMAP3_HAS_FEATURE(feat,flag)			\
-static inline unsigned int omap3_has_ ##feat(void)	\
-{							\
-	return omap_features & OMAP3_HAS_ ##flag;	\
-}							\
-
-OMAP3_HAS_FEATURE(l2cache, L2CACHE)
-OMAP3_HAS_FEATURE(sgx, SGX)
-OMAP3_HAS_FEATURE(iva, IVA)
-OMAP3_HAS_FEATURE(neon, NEON)
-OMAP3_HAS_FEATURE(isp, ISP)
-OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK)
-OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP)
-OMAP3_HAS_FEATURE(sdrc, SDRC)
-OMAP3_HAS_FEATURE(io_chain_ctrl, IO_CHAIN_CTRL)
-
-/*
- * Runtime detection of OMAP4 features
- */
-#define OMAP4_HAS_FEATURE(feat, flag)			\
-static inline unsigned int omap4_has_ ##feat(void)	\
-{							\
-	return omap_features & OMAP4_HAS_ ##flag;	\
-}							\
-
-OMAP4_HAS_FEATURE(mpu_1ghz, MPU_1GHZ)
-OMAP4_HAS_FEATURE(mpu_1_2ghz, MPU_1_2GHZ)
-OMAP4_HAS_FEATURE(mpu_1_5ghz, MPU_1_5GHZ)
-
-#endif	/* __ASSEMBLY__ */
 #endif
diff --git a/arch/arm/plat-omap/include/plat/debug-devices.h b/arch/arm/plat-omap/include/plat/debug-devices.h
new file mode 100644
index 000000000000..8fc4287222dd
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/debug-devices.h
@@ -0,0 +1,2 @@
+/* for TI reference platforms sharing the same debug card */
+extern int debug_card_init(u32 addr, unsigned gpio);
diff --git a/arch/arm/plat-omap/include/plat/dma-44xx.h b/arch/arm/plat-omap/include/plat/dma-44xx.h
deleted file mode 100644
index 1f767cb2f38a..000000000000
--- a/arch/arm/plat-omap/include/plat/dma-44xx.h
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * OMAP4 SDMA channel definitions
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- * Copyright (C) 2009-2010 Nokia Corporation
- *
- * Santosh Shilimkar (santosh.shilimkar@ti.com)
- * Benoit Cousson (b-cousson@ti.com)
- * Paul Walmsley (paul@pwsan.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_OMAP44XX_DMA_H
-#define __ARCH_ARM_MACH_OMAP2_OMAP44XX_DMA_H
-
-#define OMAP44XX_DMA_SYS_REQ0			2
-#define OMAP44XX_DMA_SYS_REQ1			3
-#define OMAP44XX_DMA_GPMC			4
-#define OMAP44XX_DMA_DSS_DISPC_REQ		6
-#define OMAP44XX_DMA_SYS_REQ2			7
-#define OMAP44XX_DMA_MCASP1_AXEVT		8
-#define OMAP44XX_DMA_ISS_REQ1			9
-#define OMAP44XX_DMA_ISS_REQ2			10
-#define OMAP44XX_DMA_MCASP1_AREVT		11
-#define OMAP44XX_DMA_ISS_REQ3			12
-#define OMAP44XX_DMA_ISS_REQ4			13
-#define OMAP44XX_DMA_DSS_RFBI_REQ		14
-#define OMAP44XX_DMA_SPI3_TX0			15
-#define OMAP44XX_DMA_SPI3_RX0			16
-#define OMAP44XX_DMA_MCBSP2_TX			17
-#define OMAP44XX_DMA_MCBSP2_RX			18
-#define OMAP44XX_DMA_MCBSP3_TX			19
-#define OMAP44XX_DMA_MCBSP3_RX			20
-#define OMAP44XX_DMA_C2C_SSCM_GPO0		21
-#define OMAP44XX_DMA_C2C_SSCM_GPO1		22
-#define OMAP44XX_DMA_SPI3_TX1			23
-#define OMAP44XX_DMA_SPI3_RX1			24
-#define OMAP44XX_DMA_I2C3_TX			25
-#define OMAP44XX_DMA_I2C3_RX			26
-#define OMAP44XX_DMA_I2C1_TX			27
-#define OMAP44XX_DMA_I2C1_RX			28
-#define OMAP44XX_DMA_I2C2_TX			29
-#define OMAP44XX_DMA_I2C2_RX			30
-#define OMAP44XX_DMA_MCBSP4_TX			31
-#define OMAP44XX_DMA_MCBSP4_RX			32
-#define OMAP44XX_DMA_MCBSP1_TX			33
-#define OMAP44XX_DMA_MCBSP1_RX			34
-#define OMAP44XX_DMA_SPI1_TX0			35
-#define OMAP44XX_DMA_SPI1_RX0			36
-#define OMAP44XX_DMA_SPI1_TX1			37
-#define OMAP44XX_DMA_SPI1_RX1			38
-#define OMAP44XX_DMA_SPI1_TX2			39
-#define OMAP44XX_DMA_SPI1_RX2			40
-#define OMAP44XX_DMA_SPI1_TX3			41
-#define OMAP44XX_DMA_SPI1_RX3			42
-#define OMAP44XX_DMA_SPI2_TX0			43
-#define OMAP44XX_DMA_SPI2_RX0			44
-#define OMAP44XX_DMA_SPI2_TX1			45
-#define OMAP44XX_DMA_SPI2_RX1			46
-#define OMAP44XX_DMA_MMC2_TX			47
-#define OMAP44XX_DMA_MMC2_RX			48
-#define OMAP44XX_DMA_UART1_TX			49
-#define OMAP44XX_DMA_UART1_RX			50
-#define OMAP44XX_DMA_UART2_TX			51
-#define OMAP44XX_DMA_UART2_RX			52
-#define OMAP44XX_DMA_UART3_TX			53
-#define OMAP44XX_DMA_UART3_RX			54
-#define OMAP44XX_DMA_UART4_TX			55
-#define OMAP44XX_DMA_UART4_RX			56
-#define OMAP44XX_DMA_MMC4_TX			57
-#define OMAP44XX_DMA_MMC4_RX			58
-#define OMAP44XX_DMA_MMC5_TX			59
-#define OMAP44XX_DMA_MMC5_RX			60
-#define OMAP44XX_DMA_MMC1_TX			61
-#define OMAP44XX_DMA_MMC1_RX			62
-#define OMAP44XX_DMA_SYS_REQ3			64
-#define OMAP44XX_DMA_MCPDM_UP			65
-#define OMAP44XX_DMA_MCPDM_DL			66
-#define OMAP44XX_DMA_DMIC_REQ			67
-#define OMAP44XX_DMA_C2C_SSCM_GPO2		68
-#define OMAP44XX_DMA_C2C_SSCM_GPO3		69
-#define OMAP44XX_DMA_SPI4_TX0			70
-#define OMAP44XX_DMA_SPI4_RX0			71
-#define OMAP44XX_DMA_DSS_DSI1_REQ0		72
-#define OMAP44XX_DMA_DSS_DSI1_REQ1		73
-#define OMAP44XX_DMA_DSS_DSI1_REQ2		74
-#define OMAP44XX_DMA_DSS_DSI1_REQ3		75
-#define OMAP44XX_DMA_DSS_HDMI_REQ		76
-#define OMAP44XX_DMA_MMC3_TX			77
-#define OMAP44XX_DMA_MMC3_RX			78
-#define OMAP44XX_DMA_USIM_TX			79
-#define OMAP44XX_DMA_USIM_RX			80
-#define OMAP44XX_DMA_DSS_DSI2_REQ0		81
-#define OMAP44XX_DMA_DSS_DSI2_REQ1		82
-#define OMAP44XX_DMA_DSS_DSI2_REQ2		83
-#define OMAP44XX_DMA_DSS_DSI2_REQ3		84
-#define OMAP44XX_DMA_SLIMBUS1_TX0		85
-#define OMAP44XX_DMA_SLIMBUS1_TX1		86
-#define OMAP44XX_DMA_SLIMBUS1_TX2		87
-#define OMAP44XX_DMA_SLIMBUS1_TX3		88
-#define OMAP44XX_DMA_SLIMBUS1_RX0		89
-#define OMAP44XX_DMA_SLIMBUS1_RX1		90
-#define OMAP44XX_DMA_SLIMBUS1_RX2		91
-#define OMAP44XX_DMA_SLIMBUS1_RX3		92
-#define OMAP44XX_DMA_SLIMBUS2_TX0		93
-#define OMAP44XX_DMA_SLIMBUS2_TX1		94
-#define OMAP44XX_DMA_SLIMBUS2_TX2		95
-#define OMAP44XX_DMA_SLIMBUS2_TX3		96
-#define OMAP44XX_DMA_SLIMBUS2_RX0		97
-#define OMAP44XX_DMA_SLIMBUS2_RX1		98
-#define OMAP44XX_DMA_SLIMBUS2_RX2		99
-#define OMAP44XX_DMA_SLIMBUS2_RX3		100
-#define OMAP44XX_DMA_ABE_REQ_0			101
-#define OMAP44XX_DMA_ABE_REQ_1			102
-#define OMAP44XX_DMA_ABE_REQ_2			103
-#define OMAP44XX_DMA_ABE_REQ_3			104
-#define OMAP44XX_DMA_ABE_REQ_4			105
-#define OMAP44XX_DMA_ABE_REQ_5			106
-#define OMAP44XX_DMA_ABE_REQ_6			107
-#define OMAP44XX_DMA_ABE_REQ_7			108
-#define OMAP44XX_DMA_AES1_P_CTX_IN_REQ		109
-#define OMAP44XX_DMA_AES1_P_DATA_IN_REQ		110
-#define OMAP44XX_DMA_AES1_P_DATA_OUT_REQ	111
-#define OMAP44XX_DMA_AES2_P_CTX_IN_REQ		112
-#define OMAP44XX_DMA_AES2_P_DATA_IN_REQ		113
-#define OMAP44XX_DMA_AES2_P_DATA_OUT_REQ	114
-#define OMAP44XX_DMA_DES_P_CTX_IN_REQ		115
-#define OMAP44XX_DMA_DES_P_DATA_IN_REQ		116
-#define OMAP44XX_DMA_DES_P_DATA_OUT_REQ		117
-#define OMAP44XX_DMA_SHA2_CTXIN_P		118
-#define OMAP44XX_DMA_SHA2_DIN_P			119
-#define OMAP44XX_DMA_SHA2_CTXOUT_P		120
-#define OMAP44XX_DMA_AES1_P_CONTEXT_OUT_REQ	121
-#define OMAP44XX_DMA_AES2_P_CONTEXT_OUT_REQ	122
-#define OMAP44XX_DMA_I2C4_TX			124
-#define OMAP44XX_DMA_I2C4_RX			125
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h
index 85868e98c11c..3f5b9cfd9c0b 100644
--- a/arch/arm/plat-omap/include/plat/dmtimer.h
+++ b/arch/arm/plat-omap/include/plat/dmtimer.h
@@ -94,6 +94,7 @@ struct dmtimer_platform_data {
 	/* set_timer_src - Only used for OMAP1 devices */
 	int (*set_timer_src)(struct platform_device *pdev, int source);
 	u32 timer_capability;
+	int (*get_context_loss_count)(struct device *);
 };
 
 int omap_dm_timer_reserve_systimer(int id);
@@ -263,6 +264,7 @@ struct omap_dm_timer {
 	unsigned reserved:1;
 	unsigned posted:1;
 	struct timer_regs context;
+	int (*get_context_loss_count)(struct device *);
 	int ctx_loss_count;
 	int revision;
 	u32 capability;
diff --git a/arch/arm/plat-omap/include/plat/fpga.h b/arch/arm/plat-omap/include/plat/fpga.h
deleted file mode 100644
index bd3c6324ae1f..000000000000
--- a/arch/arm/plat-omap/include/plat/fpga.h
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/fpga.h
- *
- * Interrupt handler for OMAP-1510 FPGA
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Copyright (C) 2002 MontaVista Software, Inc.
- *
- * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
- * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_OMAP_FPGA_H
-#define __ASM_ARCH_OMAP_FPGA_H
-
-extern void omap1510_fpga_init_irq(void);
-
-#define fpga_read(reg)			__raw_readb(reg)
-#define fpga_write(val, reg)		__raw_writeb(val, reg)
-
-/*
- * ---------------------------------------------------------------------------
- *  H2/P2 Debug board FPGA
- * ---------------------------------------------------------------------------
- */
-/* maps in the FPGA registers and the ETHR registers */
-#define H2P2_DBG_FPGA_BASE		0xE8000000		/* VA */
-#define H2P2_DBG_FPGA_SIZE		SZ_4K			/* SIZE */
-#define H2P2_DBG_FPGA_START		0x04000000		/* PA */
-
-#define H2P2_DBG_FPGA_ETHR_START	(H2P2_DBG_FPGA_START + 0x300)
-#define H2P2_DBG_FPGA_FPGA_REV		IOMEM(H2P2_DBG_FPGA_BASE + 0x10)	/* FPGA Revision */
-#define H2P2_DBG_FPGA_BOARD_REV		IOMEM(H2P2_DBG_FPGA_BASE + 0x12)	/* Board Revision */
-#define H2P2_DBG_FPGA_GPIO		IOMEM(H2P2_DBG_FPGA_BASE + 0x14)	/* GPIO outputs */
-#define H2P2_DBG_FPGA_LEDS		IOMEM(H2P2_DBG_FPGA_BASE + 0x16)	/* LEDs outputs */
-#define H2P2_DBG_FPGA_MISC_INPUTS	IOMEM(H2P2_DBG_FPGA_BASE + 0x18)	/* Misc inputs */
-#define H2P2_DBG_FPGA_LAN_STATUS	IOMEM(H2P2_DBG_FPGA_BASE + 0x1A)	/* LAN Status line */
-#define H2P2_DBG_FPGA_LAN_RESET		IOMEM(H2P2_DBG_FPGA_BASE + 0x1C)	/* LAN Reset line */
-
-/* NOTE:  most boards don't have a static mapping for the FPGA ... */
-struct h2p2_dbg_fpga {
-	/* offset 0x00 */
-	u16		smc91x[8];
-	/* offset 0x10 */
-	u16		fpga_rev;
-	u16		board_rev;
-	u16		gpio_outputs;
-	u16		leds;
-	/* offset 0x18 */
-	u16		misc_inputs;
-	u16		lan_status;
-	u16		lan_reset;
-	u16		reserved0;
-	/* offset 0x20 */
-	u16		ps2_data;
-	u16		ps2_ctrl;
-	/* plus also 4 rs232 ports ... */
-};
-
-/* LEDs definition on debug board (16 LEDs, all physically green) */
-#define H2P2_DBG_FPGA_LED_GREEN		(1 << 15)
-#define H2P2_DBG_FPGA_LED_AMBER		(1 << 14)
-#define H2P2_DBG_FPGA_LED_RED		(1 << 13)
-#define H2P2_DBG_FPGA_LED_BLUE		(1 << 12)
-/*  cpu0 load-meter LEDs */
-#define H2P2_DBG_FPGA_LOAD_METER	(1 << 0)	// A bit of fun on our board ...
-#define H2P2_DBG_FPGA_LOAD_METER_SIZE	11
-#define H2P2_DBG_FPGA_LOAD_METER_MASK	((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1)
-
-#define H2P2_DBG_FPGA_P2_LED_TIMER		(1 << 0)
-#define H2P2_DBG_FPGA_P2_LED_IDLE		(1 << 1)
-
-/*
- * ---------------------------------------------------------------------------
- *  OMAP-1510 FPGA
- * ---------------------------------------------------------------------------
- */
-#define OMAP1510_FPGA_BASE		0xE8000000		/* VA */
-#define OMAP1510_FPGA_SIZE		SZ_4K
-#define OMAP1510_FPGA_START		0x08000000		/* PA */
-
-/* Revision */
-#define OMAP1510_FPGA_REV_LOW			IOMEM(OMAP1510_FPGA_BASE + 0x0)
-#define OMAP1510_FPGA_REV_HIGH			IOMEM(OMAP1510_FPGA_BASE + 0x1)
-
-#define OMAP1510_FPGA_LCD_PANEL_CONTROL		IOMEM(OMAP1510_FPGA_BASE + 0x2)
-#define OMAP1510_FPGA_LED_DIGIT			IOMEM(OMAP1510_FPGA_BASE + 0x3)
-#define INNOVATOR_FPGA_HID_SPI			IOMEM(OMAP1510_FPGA_BASE + 0x4)
-#define OMAP1510_FPGA_POWER			IOMEM(OMAP1510_FPGA_BASE + 0x5)
-
-/* Interrupt status */
-#define OMAP1510_FPGA_ISR_LO			IOMEM(OMAP1510_FPGA_BASE + 0x6)
-#define OMAP1510_FPGA_ISR_HI			IOMEM(OMAP1510_FPGA_BASE + 0x7)
-
-/* Interrupt mask */
-#define OMAP1510_FPGA_IMR_LO			IOMEM(OMAP1510_FPGA_BASE + 0x8)
-#define OMAP1510_FPGA_IMR_HI			IOMEM(OMAP1510_FPGA_BASE + 0x9)
-
-/* Reset registers */
-#define OMAP1510_FPGA_HOST_RESET		IOMEM(OMAP1510_FPGA_BASE + 0xa)
-#define OMAP1510_FPGA_RST			IOMEM(OMAP1510_FPGA_BASE + 0xb)
-
-#define OMAP1510_FPGA_AUDIO			IOMEM(OMAP1510_FPGA_BASE + 0xc)
-#define OMAP1510_FPGA_DIP			IOMEM(OMAP1510_FPGA_BASE + 0xe)
-#define OMAP1510_FPGA_FPGA_IO			IOMEM(OMAP1510_FPGA_BASE + 0xf)
-#define OMAP1510_FPGA_UART1			IOMEM(OMAP1510_FPGA_BASE + 0x14)
-#define OMAP1510_FPGA_UART2			IOMEM(OMAP1510_FPGA_BASE + 0x15)
-#define OMAP1510_FPGA_OMAP1510_STATUS		IOMEM(OMAP1510_FPGA_BASE + 0x16)
-#define OMAP1510_FPGA_BOARD_REV			IOMEM(OMAP1510_FPGA_BASE + 0x18)
-#define OMAP1510P1_PPT_DATA			IOMEM(OMAP1510_FPGA_BASE + 0x100)
-#define OMAP1510P1_PPT_STATUS			IOMEM(OMAP1510_FPGA_BASE + 0x101)
-#define OMAP1510P1_PPT_CONTROL			IOMEM(OMAP1510_FPGA_BASE + 0x102)
-
-#define OMAP1510_FPGA_TOUCHSCREEN		IOMEM(OMAP1510_FPGA_BASE + 0x204)
-
-#define INNOVATOR_FPGA_INFO			IOMEM(OMAP1510_FPGA_BASE + 0x205)
-#define INNOVATOR_FPGA_LCD_BRIGHT_LO		IOMEM(OMAP1510_FPGA_BASE + 0x206)
-#define INNOVATOR_FPGA_LCD_BRIGHT_HI		IOMEM(OMAP1510_FPGA_BASE + 0x207)
-#define INNOVATOR_FPGA_LED_GRN_LO		IOMEM(OMAP1510_FPGA_BASE + 0x208)
-#define INNOVATOR_FPGA_LED_GRN_HI		IOMEM(OMAP1510_FPGA_BASE + 0x209)
-#define INNOVATOR_FPGA_LED_RED_LO		IOMEM(OMAP1510_FPGA_BASE + 0x20a)
-#define INNOVATOR_FPGA_LED_RED_HI		IOMEM(OMAP1510_FPGA_BASE + 0x20b)
-#define INNOVATOR_FPGA_CAM_USB_CONTROL		IOMEM(OMAP1510_FPGA_BASE + 0x20c)
-#define INNOVATOR_FPGA_EXP_CONTROL		IOMEM(OMAP1510_FPGA_BASE + 0x20d)
-#define INNOVATOR_FPGA_ISR2			IOMEM(OMAP1510_FPGA_BASE + 0x20e)
-#define INNOVATOR_FPGA_IMR2			IOMEM(OMAP1510_FPGA_BASE + 0x210)
-
-#define OMAP1510_FPGA_ETHR_START		(OMAP1510_FPGA_START + 0x300)
-
-/*
- * Power up Giga UART driver, turn on HID clock.
- * Turn off BT power, since we're not using it and it
- * draws power.
- */
-#define OMAP1510_FPGA_RESET_VALUE		0x42
-
-#define OMAP1510_FPGA_PCR_IF_PD0		(1 << 7)
-#define OMAP1510_FPGA_PCR_COM2_EN		(1 << 6)
-#define OMAP1510_FPGA_PCR_COM1_EN		(1 << 5)
-#define OMAP1510_FPGA_PCR_EXP_PD0		(1 << 4)
-#define OMAP1510_FPGA_PCR_EXP_PD1		(1 << 3)
-#define OMAP1510_FPGA_PCR_48MHZ_CLK		(1 << 2)
-#define OMAP1510_FPGA_PCR_4MHZ_CLK		(1 << 1)
-#define OMAP1510_FPGA_PCR_RSRVD_BIT0		(1 << 0)
-
-/*
- * Innovator/OMAP1510 FPGA HID register bit definitions
- */
-#define OMAP1510_FPGA_HID_SCLK	(1<<0)	/* output */
-#define OMAP1510_FPGA_HID_MOSI	(1<<1)	/* output */
-#define OMAP1510_FPGA_HID_nSS	(1<<2)	/* output 0/1 chip idle/select */
-#define OMAP1510_FPGA_HID_nHSUS	(1<<3)	/* output 0/1 host active/suspended */
-#define OMAP1510_FPGA_HID_MISO	(1<<4)	/* input */
-#define OMAP1510_FPGA_HID_ATN	(1<<5)	/* input  0/1 chip idle/ATN */
-#define OMAP1510_FPGA_HID_rsrvd	(1<<6)
-#define OMAP1510_FPGA_HID_RESETn (1<<7)	/* output - 0/1 USAR reset/run */
-
-/* The FPGA IRQ is cascaded through GPIO_13 */
-#define OMAP1510_INT_FPGA		(IH_GPIO_BASE + 13)
-
-/* IRQ Numbers for interrupts muxed through the FPGA */
-#define OMAP1510_INT_FPGA_ATN		(OMAP_FPGA_IRQ_BASE + 0)
-#define OMAP1510_INT_FPGA_ACK		(OMAP_FPGA_IRQ_BASE + 1)
-#define OMAP1510_INT_FPGA2		(OMAP_FPGA_IRQ_BASE + 2)
-#define OMAP1510_INT_FPGA3		(OMAP_FPGA_IRQ_BASE + 3)
-#define OMAP1510_INT_FPGA4		(OMAP_FPGA_IRQ_BASE + 4)
-#define OMAP1510_INT_FPGA5		(OMAP_FPGA_IRQ_BASE + 5)
-#define OMAP1510_INT_FPGA6		(OMAP_FPGA_IRQ_BASE + 6)
-#define OMAP1510_INT_FPGA7		(OMAP_FPGA_IRQ_BASE + 7)
-#define OMAP1510_INT_FPGA8		(OMAP_FPGA_IRQ_BASE + 8)
-#define OMAP1510_INT_FPGA9		(OMAP_FPGA_IRQ_BASE + 9)
-#define OMAP1510_INT_FPGA10		(OMAP_FPGA_IRQ_BASE + 10)
-#define OMAP1510_INT_FPGA11		(OMAP_FPGA_IRQ_BASE + 11)
-#define OMAP1510_INT_FPGA12		(OMAP_FPGA_IRQ_BASE + 12)
-#define OMAP1510_INT_ETHER		(OMAP_FPGA_IRQ_BASE + 13)
-#define OMAP1510_INT_FPGAUART1		(OMAP_FPGA_IRQ_BASE + 14)
-#define OMAP1510_INT_FPGAUART2		(OMAP_FPGA_IRQ_BASE + 15)
-#define OMAP1510_INT_FPGA_TS		(OMAP_FPGA_IRQ_BASE + 16)
-#define OMAP1510_INT_FPGA17		(OMAP_FPGA_IRQ_BASE + 17)
-#define OMAP1510_INT_FPGA_CAM		(OMAP_FPGA_IRQ_BASE + 18)
-#define OMAP1510_INT_FPGA_RTC_A		(OMAP_FPGA_IRQ_BASE + 19)
-#define OMAP1510_INT_FPGA_RTC_B		(OMAP_FPGA_IRQ_BASE + 20)
-#define OMAP1510_INT_FPGA_CD		(OMAP_FPGA_IRQ_BASE + 21)
-#define OMAP1510_INT_FPGA22		(OMAP_FPGA_IRQ_BASE + 22)
-#define OMAP1510_INT_FPGA23		(OMAP_FPGA_IRQ_BASE + 23)
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h
deleted file mode 100644
index 2e6e2597178c..000000000000
--- a/arch/arm/plat-omap/include/plat/gpmc.h
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * General-Purpose Memory Controller for OMAP2
- *
- * Copyright (C) 2005-2006 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __OMAP2_GPMC_H
-#define __OMAP2_GPMC_H
-
-/* Maximum Number of Chip Selects */
-#define GPMC_CS_NUM		8
-
-#define GPMC_CS_CONFIG1		0x00
-#define GPMC_CS_CONFIG2		0x04
-#define GPMC_CS_CONFIG3		0x08
-#define GPMC_CS_CONFIG4		0x0c
-#define GPMC_CS_CONFIG5		0x10
-#define GPMC_CS_CONFIG6		0x14
-#define GPMC_CS_CONFIG7		0x18
-#define GPMC_CS_NAND_COMMAND	0x1c
-#define GPMC_CS_NAND_ADDRESS	0x20
-#define GPMC_CS_NAND_DATA	0x24
-
-/* Control Commands */
-#define GPMC_CONFIG_RDY_BSY	0x00000001
-#define GPMC_CONFIG_DEV_SIZE	0x00000002
-#define GPMC_CONFIG_DEV_TYPE	0x00000003
-#define GPMC_SET_IRQ_STATUS	0x00000004
-#define GPMC_CONFIG_WP		0x00000005
-
-#define GPMC_GET_IRQ_STATUS	0x00000006
-#define GPMC_PREFETCH_FIFO_CNT	0x00000007 /* bytes available in FIFO for r/w */
-#define GPMC_PREFETCH_COUNT	0x00000008 /* remaining bytes to be read/write*/
-#define GPMC_STATUS_BUFFER	0x00000009 /* 1: buffer is available to write */
-
-#define GPMC_NAND_COMMAND	0x0000000a
-#define GPMC_NAND_ADDRESS	0x0000000b
-#define GPMC_NAND_DATA		0x0000000c
-
-#define GPMC_ENABLE_IRQ		0x0000000d
-
-/* ECC commands */
-#define GPMC_ECC_READ		0 /* Reset Hardware ECC for read */
-#define GPMC_ECC_WRITE		1 /* Reset Hardware ECC for write */
-#define GPMC_ECC_READSYN	2 /* Reset before syndrom is read back */
-
-#define GPMC_CONFIG1_WRAPBURST_SUPP     (1 << 31)
-#define GPMC_CONFIG1_READMULTIPLE_SUPP  (1 << 30)
-#define GPMC_CONFIG1_READTYPE_ASYNC     (0 << 29)
-#define GPMC_CONFIG1_READTYPE_SYNC      (1 << 29)
-#define GPMC_CONFIG1_WRITEMULTIPLE_SUPP (1 << 28)
-#define GPMC_CONFIG1_WRITETYPE_ASYNC    (0 << 27)
-#define GPMC_CONFIG1_WRITETYPE_SYNC     (1 << 27)
-#define GPMC_CONFIG1_CLKACTIVATIONTIME(val) ((val & 3) << 25)
-#define GPMC_CONFIG1_PAGE_LEN(val)      ((val & 3) << 23)
-#define GPMC_CONFIG1_WAIT_READ_MON      (1 << 22)
-#define GPMC_CONFIG1_WAIT_WRITE_MON     (1 << 21)
-#define GPMC_CONFIG1_WAIT_MON_IIME(val) ((val & 3) << 18)
-#define GPMC_CONFIG1_WAIT_PIN_SEL(val)  ((val & 3) << 16)
-#define GPMC_CONFIG1_DEVICESIZE(val)    ((val & 3) << 12)
-#define GPMC_CONFIG1_DEVICESIZE_16      GPMC_CONFIG1_DEVICESIZE(1)
-#define GPMC_CONFIG1_DEVICETYPE(val)    ((val & 3) << 10)
-#define GPMC_CONFIG1_DEVICETYPE_NOR     GPMC_CONFIG1_DEVICETYPE(0)
-#define GPMC_CONFIG1_MUXADDDATA         (1 << 9)
-#define GPMC_CONFIG1_TIME_PARA_GRAN     (1 << 4)
-#define GPMC_CONFIG1_FCLK_DIV(val)      (val & 3)
-#define GPMC_CONFIG1_FCLK_DIV2          (GPMC_CONFIG1_FCLK_DIV(1))
-#define GPMC_CONFIG1_FCLK_DIV3          (GPMC_CONFIG1_FCLK_DIV(2))
-#define GPMC_CONFIG1_FCLK_DIV4          (GPMC_CONFIG1_FCLK_DIV(3))
-#define GPMC_CONFIG7_CSVALID		(1 << 6)
-
-#define GPMC_DEVICETYPE_NOR		0
-#define GPMC_DEVICETYPE_NAND		2
-#define GPMC_CONFIG_WRITEPROTECT	0x00000010
-#define GPMC_STATUS_BUFF_EMPTY		0x00000001
-#define WR_RD_PIN_MONITORING		0x00600000
-#define GPMC_PREFETCH_STATUS_FIFO_CNT(val)	((val >> 24) & 0x7F)
-#define GPMC_PREFETCH_STATUS_COUNT(val)	(val & 0x00003fff)
-#define GPMC_IRQ_FIFOEVENTENABLE	0x01
-#define GPMC_IRQ_COUNT_EVENT		0x02
-
-#define PREFETCH_FIFOTHRESHOLD_MAX	0x40
-#define PREFETCH_FIFOTHRESHOLD(val)	((val) << 8)
-
-enum omap_ecc {
-		/* 1-bit ecc: stored at end of spare area */
-	OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */
-	OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */
-		/* 1-bit ecc: stored at beginning of spare area as romcode */
-	OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */
-	OMAP_ECC_BCH4_CODE_HW, /* 4-bit BCH ecc code */
-	OMAP_ECC_BCH8_CODE_HW, /* 8-bit BCH ecc code */
-};
-
-/*
- * Note that all values in this struct are in nanoseconds except sync_clk
- * (which is in picoseconds), while the register values are in gpmc_fck cycles.
- */
-struct gpmc_timings {
-	/* Minimum clock period for synchronous mode (in picoseconds) */
-	u32 sync_clk;
-
-	/* Chip-select signal timings corresponding to GPMC_CS_CONFIG2 */
-	u16 cs_on;		/* Assertion time */
-	u16 cs_rd_off;		/* Read deassertion time */
-	u16 cs_wr_off;		/* Write deassertion time */
-
-	/* ADV signal timings corresponding to GPMC_CONFIG3 */
-	u16 adv_on;		/* Assertion time */
-	u16 adv_rd_off;		/* Read deassertion time */
-	u16 adv_wr_off;		/* Write deassertion time */
-
-	/* WE signals timings corresponding to GPMC_CONFIG4 */
-	u16 we_on;		/* WE assertion time */
-	u16 we_off;		/* WE deassertion time */
-
-	/* OE signals timings corresponding to GPMC_CONFIG4 */
-	u16 oe_on;		/* OE assertion time */
-	u16 oe_off;		/* OE deassertion time */
-
-	/* Access time and cycle time timings corresponding to GPMC_CONFIG5 */
-	u16 page_burst_access;	/* Multiple access word delay */
-	u16 access;		/* Start-cycle to first data valid delay */
-	u16 rd_cycle;		/* Total read cycle time */
-	u16 wr_cycle;		/* Total write cycle time */
-
-	/* The following are only on OMAP3430 */
-	u16 wr_access;		/* WRACCESSTIME */
-	u16 wr_data_mux_bus;	/* WRDATAONADMUXBUS */
-};
-
-struct gpmc_nand_regs {
-	void __iomem	*gpmc_status;
-	void __iomem	*gpmc_nand_command;
-	void __iomem	*gpmc_nand_address;
-	void __iomem	*gpmc_nand_data;
-	void __iomem	*gpmc_prefetch_config1;
-	void __iomem	*gpmc_prefetch_config2;
-	void __iomem	*gpmc_prefetch_control;
-	void __iomem	*gpmc_prefetch_status;
-	void __iomem	*gpmc_ecc_config;
-	void __iomem	*gpmc_ecc_control;
-	void __iomem	*gpmc_ecc_size_config;
-	void __iomem	*gpmc_ecc1_result;
-	void __iomem	*gpmc_bch_result0;
-};
-
-extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs);
-extern int gpmc_get_client_irq(unsigned irq_config);
-
-extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns);
-extern unsigned int gpmc_ps_to_ticks(unsigned int time_ps);
-extern unsigned int gpmc_ticks_to_ns(unsigned int ticks);
-extern unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns);
-extern unsigned long gpmc_get_fclk_period(void);
-
-extern void gpmc_cs_write_reg(int cs, int idx, u32 val);
-extern u32 gpmc_cs_read_reg(int cs, int idx);
-extern int gpmc_cs_calc_divider(int cs, unsigned int sync_clk);
-extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t);
-extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
-extern void gpmc_cs_free(int cs);
-extern int gpmc_cs_set_reserved(int cs, int reserved);
-extern int gpmc_cs_reserved(int cs);
-extern int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode,
-					unsigned int u32_count, int is_write);
-extern int gpmc_prefetch_reset(int cs);
-extern void omap3_gpmc_save_context(void);
-extern void omap3_gpmc_restore_context(void);
-extern int gpmc_read_status(int cmd);
-extern int gpmc_cs_configure(int cs, int cmd, int wval);
-extern int gpmc_nand_read(int cs, int cmd);
-extern int gpmc_nand_write(int cs, int cmd, int wval);
-
-int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size);
-int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code);
-
-#ifdef CONFIG_ARCH_OMAP3
-int gpmc_init_hwecc_bch(int cs, int nsectors, int nerrors);
-int gpmc_enable_hwecc_bch(int cs, int mode, int dev_width, int nsectors,
-			  int nerrors);
-int gpmc_calculate_ecc_bch4(int cs, const u_char *dat, u_char *ecc);
-int gpmc_calculate_ecc_bch8(int cs, const u_char *dat, u_char *ecc);
-#endif /* CONFIG_ARCH_OMAP3 */
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/plat-omap/include/plat/i2c.h
index 7c22b9e10dc3..7a9028cb5a75 100644
--- a/arch/arm/plat-omap/include/plat/i2c.h
+++ b/arch/arm/plat-omap/include/plat/i2c.h
@@ -18,11 +18,15 @@
  * 02110-1301 USA
  *
  */
-#ifndef __ASM__ARCH_OMAP_I2C_H
-#define __ASM__ARCH_OMAP_I2C_H
 
-#include <linux/i2c.h>
-#include <linux/i2c-omap.h>
+#ifndef __PLAT_OMAP_I2C_H
+#define __PLAT_OMAP_I2C_H
+
+struct i2c_board_info;
+struct omap_i2c_bus_platform_data;
+
+int omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata,
+			int bus_id);
 
 #if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
 extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
@@ -37,23 +41,7 @@ static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
 }
 #endif
 
-/**
- * i2c_dev_attr - OMAP I2C controller device attributes for omap_hwmod
- * @fifo_depth: total controller FIFO size (in bytes)
- * @flags: differences in hardware support capability
- *
- * @fifo_depth represents what exists on the hardware, not what is
- * actually configured at runtime by the device driver.
- */
-struct omap_i2c_dev_attr {
-	u8	fifo_depth;
-	u32	flags;
-};
-
-void __init omap1_i2c_mux_pins(int bus_id);
-void __init omap2_i2c_mux_pins(int bus_id);
-
 struct omap_hwmod;
 int omap_i2c_reset(struct omap_hwmod *oh);
 
-#endif /* __ASM__ARCH_OMAP_I2C_H */
+#endif /* __PLAT_OMAP_I2C_H */
diff --git a/arch/arm/plat-omap/include/plat/iommu.h b/arch/arm/plat-omap/include/plat/iommu.h
deleted file mode 100644
index 68b5f0362f35..000000000000
--- a/arch/arm/plat-omap/include/plat/iommu.h
+++ /dev/null
@@ -1,221 +0,0 @@
-/*
- * omap iommu: main structures
- *
- * Copyright (C) 2008-2009 Nokia Corporation
- *
- * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_IOMMU_H
-#define __MACH_IOMMU_H
-
-struct iotlb_entry {
-	u32 da;
-	u32 pa;
-	u32 pgsz, prsvd, valid;
-	union {
-		u16 ap;
-		struct {
-			u32 endian, elsz, mixed;
-		};
-	};
-};
-
-struct omap_iommu {
-	const char	*name;
-	struct module	*owner;
-	struct clk	*clk;
-	void __iomem	*regbase;
-	struct device	*dev;
-	void		*isr_priv;
-	struct iommu_domain *domain;
-
-	unsigned int	refcount;
-	spinlock_t	iommu_lock;	/* global for this whole object */
-
-	/*
-	 * We don't change iopgd for a situation like pgd for a task,
-	 * but share it globally for each iommu.
-	 */
-	u32		*iopgd;
-	spinlock_t	page_table_lock; /* protect iopgd */
-
-	int		nr_tlb_entries;
-
-	struct list_head	mmap;
-	struct mutex		mmap_lock; /* protect mmap */
-
-	void *ctx; /* iommu context: registres saved area */
-	u32 da_start;
-	u32 da_end;
-};
-
-struct cr_regs {
-	union {
-		struct {
-			u16 cam_l;
-			u16 cam_h;
-		};
-		u32 cam;
-	};
-	union {
-		struct {
-			u16 ram_l;
-			u16 ram_h;
-		};
-		u32 ram;
-	};
-};
-
-struct iotlb_lock {
-	short base;
-	short vict;
-};
-
-/* architecture specific functions */
-struct iommu_functions {
-	unsigned long	version;
-
-	int (*enable)(struct omap_iommu *obj);
-	void (*disable)(struct omap_iommu *obj);
-	void (*set_twl)(struct omap_iommu *obj, bool on);
-	u32 (*fault_isr)(struct omap_iommu *obj, u32 *ra);
-
-	void (*tlb_read_cr)(struct omap_iommu *obj, struct cr_regs *cr);
-	void (*tlb_load_cr)(struct omap_iommu *obj, struct cr_regs *cr);
-
-	struct cr_regs *(*alloc_cr)(struct omap_iommu *obj,
-							struct iotlb_entry *e);
-	int (*cr_valid)(struct cr_regs *cr);
-	u32 (*cr_to_virt)(struct cr_regs *cr);
-	void (*cr_to_e)(struct cr_regs *cr, struct iotlb_entry *e);
-	ssize_t (*dump_cr)(struct omap_iommu *obj, struct cr_regs *cr,
-							char *buf);
-
-	u32 (*get_pte_attr)(struct iotlb_entry *e);
-
-	void (*save_ctx)(struct omap_iommu *obj);
-	void (*restore_ctx)(struct omap_iommu *obj);
-	ssize_t (*dump_ctx)(struct omap_iommu *obj, char *buf, ssize_t len);
-};
-
-/**
- * struct omap_mmu_dev_attr - OMAP mmu device attributes for omap_hwmod
- * @da_start:		device address where the va space starts.
- * @da_end:		device address where the va space ends.
- * @nr_tlb_entries:	number of entries supported by the translation
- *			look-aside buffer (TLB).
- */
-struct omap_mmu_dev_attr {
-	u32 da_start;
-	u32 da_end;
-	int nr_tlb_entries;
-};
-
-struct iommu_platform_data {
-	const char *name;
-	const char *clk_name;
-	const int nr_tlb_entries;
-	u32 da_start;
-	u32 da_end;
-};
-
-/**
- * struct iommu_arch_data - omap iommu private data
- * @name: name of the iommu device
- * @iommu_dev: handle of the iommu device
- *
- * This is an omap iommu private data object, which binds an iommu user
- * to its iommu device. This object should be placed at the iommu user's
- * dev_archdata so generic IOMMU API can be used without having to
- * utilize omap-specific plumbing anymore.
- */
-struct omap_iommu_arch_data {
-	const char *name;
-	struct omap_iommu *iommu_dev;
-};
-
-#ifdef CONFIG_IOMMU_API
-/**
- * dev_to_omap_iommu() - retrieves an omap iommu object from a user device
- * @dev: iommu client device
- */
-static inline struct omap_iommu *dev_to_omap_iommu(struct device *dev)
-{
-	struct omap_iommu_arch_data *arch_data = dev->archdata.iommu;
-
-	return arch_data->iommu_dev;
-}
-#endif
-
-/* IOMMU errors */
-#define OMAP_IOMMU_ERR_TLB_MISS		(1 << 0)
-#define OMAP_IOMMU_ERR_TRANS_FAULT	(1 << 1)
-#define OMAP_IOMMU_ERR_EMU_MISS		(1 << 2)
-#define OMAP_IOMMU_ERR_TBLWALK_FAULT	(1 << 3)
-#define OMAP_IOMMU_ERR_MULTIHIT_FAULT	(1 << 4)
-
-#if defined(CONFIG_ARCH_OMAP1)
-#error "iommu for this processor not implemented yet"
-#else
-#include <plat/iommu2.h>
-#endif
-
-/*
- * utilities for super page(16MB, 1MB, 64KB and 4KB)
- */
-
-#define iopgsz_max(bytes)			\
-	(((bytes) >= SZ_16M) ? SZ_16M :		\
-	 ((bytes) >= SZ_1M)  ? SZ_1M  :		\
-	 ((bytes) >= SZ_64K) ? SZ_64K :		\
-	 ((bytes) >= SZ_4K)  ? SZ_4K  :	0)
-
-#define bytes_to_iopgsz(bytes)				\
-	(((bytes) == SZ_16M) ? MMU_CAM_PGSZ_16M :	\
-	 ((bytes) == SZ_1M)  ? MMU_CAM_PGSZ_1M  :	\
-	 ((bytes) == SZ_64K) ? MMU_CAM_PGSZ_64K :	\
-	 ((bytes) == SZ_4K)  ? MMU_CAM_PGSZ_4K  : -1)
-
-#define iopgsz_to_bytes(iopgsz)				\
-	(((iopgsz) == MMU_CAM_PGSZ_16M)	? SZ_16M :	\
-	 ((iopgsz) == MMU_CAM_PGSZ_1M)	? SZ_1M  :	\
-	 ((iopgsz) == MMU_CAM_PGSZ_64K)	? SZ_64K :	\
-	 ((iopgsz) == MMU_CAM_PGSZ_4K)	? SZ_4K  : 0)
-
-#define iopgsz_ok(bytes) (bytes_to_iopgsz(bytes) >= 0)
-
-/*
- * global functions
- */
-extern u32 omap_iommu_arch_version(void);
-
-extern void omap_iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e);
-
-extern int
-omap_iopgtable_store_entry(struct omap_iommu *obj, struct iotlb_entry *e);
-
-extern int omap_iommu_set_isr(const char *name,
-		 int (*isr)(struct omap_iommu *obj, u32 da, u32 iommu_errs,
-				    void *priv),
-			 void *isr_priv);
-
-extern void omap_iommu_save_ctx(struct device *dev);
-extern void omap_iommu_restore_ctx(struct device *dev);
-
-extern int omap_install_iommu_arch(const struct iommu_functions *ops);
-extern void omap_uninstall_iommu_arch(const struct iommu_functions *ops);
-
-extern int omap_foreach_iommu_device(void *data,
-				int (*fn)(struct device *, void *));
-
-extern ssize_t
-omap_iommu_dump_ctx(struct omap_iommu *obj, char *buf, ssize_t len);
-extern size_t
-omap_dump_tlb_entries(struct omap_iommu *obj, char *buf, ssize_t len);
-
-#endif /* __MACH_IOMMU_H */
diff --git a/arch/arm/plat-omap/include/plat/iommu2.h b/arch/arm/plat-omap/include/plat/iommu2.h
deleted file mode 100644
index d4116b595e40..000000000000
--- a/arch/arm/plat-omap/include/plat/iommu2.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * omap iommu: omap2 architecture specific definitions
- *
- * Copyright (C) 2008-2009 Nokia Corporation
- *
- * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_IOMMU2_H
-#define __MACH_IOMMU2_H
-
-#include <linux/io.h>
-
-/*
- * MMU Register offsets
- */
-#define MMU_REVISION		0x00
-#define MMU_SYSCONFIG		0x10
-#define MMU_SYSSTATUS		0x14
-#define MMU_IRQSTATUS		0x18
-#define MMU_IRQENABLE		0x1c
-#define MMU_WALKING_ST		0x40
-#define MMU_CNTL		0x44
-#define MMU_FAULT_AD		0x48
-#define MMU_TTB			0x4c
-#define MMU_LOCK		0x50
-#define MMU_LD_TLB		0x54
-#define MMU_CAM			0x58
-#define MMU_RAM			0x5c
-#define MMU_GFLUSH		0x60
-#define MMU_FLUSH_ENTRY		0x64
-#define MMU_READ_CAM		0x68
-#define MMU_READ_RAM		0x6c
-#define MMU_EMU_FAULT_AD	0x70
-
-#define MMU_REG_SIZE		256
-
-/*
- * MMU Register bit definitions
- */
-#define MMU_LOCK_BASE_SHIFT	10
-#define MMU_LOCK_BASE_MASK	(0x1f << MMU_LOCK_BASE_SHIFT)
-#define MMU_LOCK_BASE(x)	\
-	((x & MMU_LOCK_BASE_MASK) >> MMU_LOCK_BASE_SHIFT)
-
-#define MMU_LOCK_VICT_SHIFT	4
-#define MMU_LOCK_VICT_MASK	(0x1f << MMU_LOCK_VICT_SHIFT)
-#define MMU_LOCK_VICT(x)	\
-	((x & MMU_LOCK_VICT_MASK) >> MMU_LOCK_VICT_SHIFT)
-
-#define MMU_CAM_VATAG_SHIFT	12
-#define MMU_CAM_VATAG_MASK \
-	((~0UL >> MMU_CAM_VATAG_SHIFT) << MMU_CAM_VATAG_SHIFT)
-#define MMU_CAM_P		(1 << 3)
-#define MMU_CAM_V		(1 << 2)
-#define MMU_CAM_PGSZ_MASK	3
-#define MMU_CAM_PGSZ_1M		(0 << 0)
-#define MMU_CAM_PGSZ_64K	(1 << 0)
-#define MMU_CAM_PGSZ_4K		(2 << 0)
-#define MMU_CAM_PGSZ_16M	(3 << 0)
-
-#define MMU_RAM_PADDR_SHIFT	12
-#define MMU_RAM_PADDR_MASK \
-	((~0UL >> MMU_RAM_PADDR_SHIFT) << MMU_RAM_PADDR_SHIFT)
-#define MMU_RAM_ENDIAN_SHIFT	9
-#define MMU_RAM_ENDIAN_MASK	(1 << MMU_RAM_ENDIAN_SHIFT)
-#define MMU_RAM_ENDIAN_BIG	(1 << MMU_RAM_ENDIAN_SHIFT)
-#define MMU_RAM_ENDIAN_LITTLE	(0 << MMU_RAM_ENDIAN_SHIFT)
-#define MMU_RAM_ELSZ_SHIFT	7
-#define MMU_RAM_ELSZ_MASK	(3 << MMU_RAM_ELSZ_SHIFT)
-#define MMU_RAM_ELSZ_8		(0 << MMU_RAM_ELSZ_SHIFT)
-#define MMU_RAM_ELSZ_16		(1 << MMU_RAM_ELSZ_SHIFT)
-#define MMU_RAM_ELSZ_32		(2 << MMU_RAM_ELSZ_SHIFT)
-#define MMU_RAM_ELSZ_NONE	(3 << MMU_RAM_ELSZ_SHIFT)
-#define MMU_RAM_MIXED_SHIFT	6
-#define MMU_RAM_MIXED_MASK	(1 << MMU_RAM_MIXED_SHIFT)
-#define MMU_RAM_MIXED		MMU_RAM_MIXED_MASK
-
-/*
- * register accessors
- */
-static inline u32 iommu_read_reg(struct omap_iommu *obj, size_t offs)
-{
-	return __raw_readl(obj->regbase + offs);
-}
-
-static inline void iommu_write_reg(struct omap_iommu *obj, u32 val, size_t offs)
-{
-	__raw_writel(val, obj->regbase + offs);
-}
-
-#endif /* __MACH_IOMMU2_H */
diff --git a/arch/arm/plat-omap/include/plat/iopgtable.h b/arch/arm/plat-omap/include/plat/iopgtable.h
deleted file mode 100644
index 66a813977d52..000000000000
--- a/arch/arm/plat-omap/include/plat/iopgtable.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * omap iommu: pagetable definitions
- *
- * Copyright (C) 2008-2010 Nokia Corporation
- *
- * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __PLAT_OMAP_IOMMU_H
-#define __PLAT_OMAP_IOMMU_H
-
-/*
- * "L2 table" address mask and size definitions.
- */
-#define IOPGD_SHIFT		20
-#define IOPGD_SIZE		(1UL << IOPGD_SHIFT)
-#define IOPGD_MASK		(~(IOPGD_SIZE - 1))
-
-/*
- * "section" address mask and size definitions.
- */
-#define IOSECTION_SHIFT		20
-#define IOSECTION_SIZE		(1UL << IOSECTION_SHIFT)
-#define IOSECTION_MASK		(~(IOSECTION_SIZE - 1))
-
-/*
- * "supersection" address mask and size definitions.
- */
-#define IOSUPER_SHIFT		24
-#define IOSUPER_SIZE		(1UL << IOSUPER_SHIFT)
-#define IOSUPER_MASK		(~(IOSUPER_SIZE - 1))
-
-#define PTRS_PER_IOPGD		(1UL << (32 - IOPGD_SHIFT))
-#define IOPGD_TABLE_SIZE	(PTRS_PER_IOPGD * sizeof(u32))
-
-/*
- * "small page" address mask and size definitions.
- */
-#define IOPTE_SHIFT		12
-#define IOPTE_SIZE		(1UL << IOPTE_SHIFT)
-#define IOPTE_MASK		(~(IOPTE_SIZE - 1))
-
-/*
- * "large page" address mask and size definitions.
- */
-#define IOLARGE_SHIFT		16
-#define IOLARGE_SIZE		(1UL << IOLARGE_SHIFT)
-#define IOLARGE_MASK		(~(IOLARGE_SIZE - 1))
-
-#define PTRS_PER_IOPTE		(1UL << (IOPGD_SHIFT - IOPTE_SHIFT))
-#define IOPTE_TABLE_SIZE	(PTRS_PER_IOPTE * sizeof(u32))
-
-#define IOPAGE_MASK		IOPTE_MASK
-
-/**
- * omap_iommu_translate() - va to pa translation
- * @d:		omap iommu descriptor
- * @va:		virtual address
- * @mask:	omap iommu descriptor mask
- *
- * va to pa translation
- */
-static inline phys_addr_t omap_iommu_translate(u32 d, u32 va, u32 mask)
-{
-	return (d & mask) | (va & (~mask));
-}
-
-/*
- * some descriptor attributes.
- */
-#define IOPGD_TABLE		(1 << 0)
-#define IOPGD_SECTION		(2 << 0)
-#define IOPGD_SUPER		(1 << 18 | 2 << 0)
-
-#define iopgd_is_table(x)	(((x) & 3) == IOPGD_TABLE)
-#define iopgd_is_section(x)	(((x) & (1 << 18 | 3)) == IOPGD_SECTION)
-#define iopgd_is_super(x)	(((x) & (1 << 18 | 3)) == IOPGD_SUPER)
-
-#define IOPTE_SMALL		(2 << 0)
-#define IOPTE_LARGE		(1 << 0)
-
-#define iopte_is_small(x)	(((x) & 2) == IOPTE_SMALL)
-#define iopte_is_large(x)	(((x) & 3) == IOPTE_LARGE)
-
-/* to find an entry in a page-table-directory */
-#define iopgd_index(da)		(((da) >> IOPGD_SHIFT) & (PTRS_PER_IOPGD - 1))
-#define iopgd_offset(obj, da)	((obj)->iopgd + iopgd_index(da))
-
-#define iopgd_page_paddr(iopgd)	(*iopgd & ~((1 << 10) - 1))
-#define iopgd_page_vaddr(iopgd)	((u32 *)phys_to_virt(iopgd_page_paddr(iopgd)))
-
-/* to find an entry in the second-level page table. */
-#define iopte_index(da)		(((da) >> IOPTE_SHIFT) & (PTRS_PER_IOPTE - 1))
-#define iopte_offset(iopgd, da)	(iopgd_page_vaddr(iopgd) + iopte_index(da))
-
-static inline u32 iotlb_init_entry(struct iotlb_entry *e, u32 da, u32 pa,
-				   u32 flags)
-{
-	memset(e, 0, sizeof(*e));
-
-	e->da		= da;
-	e->pa		= pa;
-	e->valid	= 1;
-	/* FIXME: add OMAP1 support */
-	e->pgsz		= flags & MMU_CAM_PGSZ_MASK;
-	e->endian	= flags & MMU_RAM_ENDIAN_MASK;
-	e->elsz		= flags & MMU_RAM_ELSZ_MASK;
-	e->mixed	= flags & MMU_RAM_MIXED_MASK;
-
-	return iopgsz_to_bytes(e->pgsz);
-}
-
-#define to_iommu(dev)							\
-	(struct omap_iommu *)platform_get_drvdata(to_platform_device(dev))
-
-#endif /* __PLAT_OMAP_IOMMU_H */
diff --git a/arch/arm/plat-omap/include/plat/iovmm.h b/arch/arm/plat-omap/include/plat/iovmm.h
deleted file mode 100644
index 498e57cda6cd..000000000000
--- a/arch/arm/plat-omap/include/plat/iovmm.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * omap iommu: simple virtual address space management
- *
- * Copyright (C) 2008-2009 Nokia Corporation
- *
- * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __IOMMU_MMAP_H
-#define __IOMMU_MMAP_H
-
-#include <linux/iommu.h>
-
-struct iovm_struct {
-	struct omap_iommu	*iommu;	/* iommu object which this belongs to */
-	u32			da_start; /* area definition */
-	u32			da_end;
-	u32			flags; /* IOVMF_: see below */
-	struct list_head	list; /* linked in ascending order */
-	const struct sg_table	*sgt; /* keep 'page' <-> 'da' mapping */
-	void			*va; /* mpu side mapped address */
-};
-
-/*
- * IOVMF_FLAGS: attribute for iommu virtual memory area(iovma)
- *
- * lower 16 bit is used for h/w and upper 16 bit is for s/w.
- */
-#define IOVMF_SW_SHIFT		16
-
-/*
- * iovma: h/w flags derived from cam and ram attribute
- */
-#define IOVMF_CAM_MASK		(~((1 << 10) - 1))
-#define IOVMF_RAM_MASK		(~IOVMF_CAM_MASK)
-
-#define IOVMF_PGSZ_MASK		(3 << 0)
-#define IOVMF_PGSZ_1M		MMU_CAM_PGSZ_1M
-#define IOVMF_PGSZ_64K		MMU_CAM_PGSZ_64K
-#define IOVMF_PGSZ_4K		MMU_CAM_PGSZ_4K
-#define IOVMF_PGSZ_16M		MMU_CAM_PGSZ_16M
-
-#define IOVMF_ENDIAN_MASK	(1 << 9)
-#define IOVMF_ENDIAN_BIG	MMU_RAM_ENDIAN_BIG
-#define IOVMF_ENDIAN_LITTLE	MMU_RAM_ENDIAN_LITTLE
-
-#define IOVMF_ELSZ_MASK		(3 << 7)
-#define IOVMF_ELSZ_8		MMU_RAM_ELSZ_8
-#define IOVMF_ELSZ_16		MMU_RAM_ELSZ_16
-#define IOVMF_ELSZ_32		MMU_RAM_ELSZ_32
-#define IOVMF_ELSZ_NONE		MMU_RAM_ELSZ_NONE
-
-#define IOVMF_MIXED_MASK	(1 << 6)
-#define IOVMF_MIXED		MMU_RAM_MIXED
-
-/*
- * iovma: s/w flags, used for mapping and umapping internally.
- */
-#define IOVMF_MMIO		(1 << IOVMF_SW_SHIFT)
-#define IOVMF_ALLOC		(2 << IOVMF_SW_SHIFT)
-#define IOVMF_ALLOC_MASK	(3 << IOVMF_SW_SHIFT)
-
-/* "superpages" is supported just with physically linear pages */
-#define IOVMF_DISCONT		(1 << (2 + IOVMF_SW_SHIFT))
-#define IOVMF_LINEAR		(2 << (2 + IOVMF_SW_SHIFT))
-#define IOVMF_LINEAR_MASK	(3 << (2 + IOVMF_SW_SHIFT))
-
-#define IOVMF_DA_FIXED		(1 << (4 + IOVMF_SW_SHIFT))
-
-
-extern struct iovm_struct *omap_find_iovm_area(struct device *dev, u32 da);
-extern u32
-omap_iommu_vmap(struct iommu_domain *domain, struct device *dev, u32 da,
-			const struct sg_table *sgt, u32 flags);
-extern struct sg_table *omap_iommu_vunmap(struct iommu_domain *domain,
-				struct device *dev, u32 da);
-extern u32
-omap_iommu_vmalloc(struct iommu_domain *domain, struct device *dev,
-				u32 da, size_t bytes, u32 flags);
-extern void
-omap_iommu_vfree(struct iommu_domain *domain, struct device *dev,
-				const u32 da);
-extern void *omap_da_to_va(struct device *dev, u32 da);
-
-#endif /* __IOMMU_MMAP_H */
diff --git a/arch/arm/plat-omap/include/plat/led.h b/arch/arm/plat-omap/include/plat/led.h
deleted file mode 100644
index 25e451e7e2fd..000000000000
--- a/arch/arm/plat-omap/include/plat/led.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- *  arch/arm/plat-omap/include/mach/led.h
- *
- *  Copyright (C) 2006 Samsung Electronics
- *  Kyungmin Park <kyungmin.park@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef ASMARM_ARCH_LED_H
-#define ASMARM_ARCH_LED_H
-
-struct omap_led_config {
-	struct led_classdev	cdev;
-	s16			gpio;
-};
-
-struct omap_led_platform_data {
-	s16			nr_leds;
-	struct omap_led_config	*leds;
-};
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/menelaus.h b/arch/arm/plat-omap/include/plat/menelaus.h
deleted file mode 100644
index 4a970ec62dd1..000000000000
--- a/arch/arm/plat-omap/include/plat/menelaus.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/menelaus.h
- *
- * Functions to access Menelaus power management chip
- */
-
-#ifndef __ASM_ARCH_MENELAUS_H
-#define __ASM_ARCH_MENELAUS_H
-
-struct device;
-
-struct menelaus_platform_data {
-	int (* late_init)(struct device *dev);
-};
-
-extern int menelaus_register_mmc_callback(void (*callback)(void *data, u8 card_mask),
-					  void *data);
-extern void menelaus_unregister_mmc_callback(void);
-extern int menelaus_set_mmc_opendrain(int slot, int enable);
-extern int menelaus_set_mmc_slot(int slot, int enable, int power, int cd_on);
-
-extern int menelaus_set_vmem(unsigned int mV);
-extern int menelaus_set_vio(unsigned int mV);
-extern int menelaus_set_vmmc(unsigned int mV);
-extern int menelaus_set_vaux(unsigned int mV);
-extern int menelaus_set_vdcdc(int dcdc, unsigned int mV);
-extern int menelaus_set_slot_sel(int enable);
-extern int menelaus_get_slot_pin_states(void);
-extern int menelaus_set_vcore_sw(unsigned int mV);
-extern int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV);
-
-#define EN_VPLL_SLEEP	(1 << 7)
-#define EN_VMMC_SLEEP	(1 << 6)
-#define EN_VAUX_SLEEP	(1 << 5)
-#define EN_VIO_SLEEP	(1 << 4)
-#define EN_VMEM_SLEEP	(1 << 3)
-#define EN_DC3_SLEEP	(1 << 2)
-#define EN_DC2_SLEEP	(1 << 1)
-#define EN_VC_SLEEP	(1 << 0)
-
-extern int menelaus_set_regulator_sleep(int enable, u32 val);
-
-#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_MENELAUS)
-#define omap_has_menelaus()	1
-#else
-#define omap_has_menelaus()	0
-#endif
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
deleted file mode 100644
index 346af5b490be..000000000000
--- a/arch/arm/plat-omap/include/plat/mmc.h
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * MMC definitions for OMAP2
- *
- * Copyright (C) 2006 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __OMAP2_MMC_H
-#define __OMAP2_MMC_H
-
-#include <linux/types.h>
-#include <linux/device.h>
-#include <linux/mmc/host.h>
-
-#include <plat/omap_hwmod.h>
-
-#define OMAP15XX_NR_MMC		1
-#define OMAP16XX_NR_MMC		2
-#define OMAP1_MMC_SIZE		0x080
-#define OMAP1_MMC1_BASE		0xfffb7800
-#define OMAP1_MMC2_BASE		0xfffb7c00	/* omap16xx only */
-
-#define OMAP24XX_NR_MMC		2
-#define OMAP2420_MMC_SIZE	OMAP1_MMC_SIZE
-#define OMAP2_MMC1_BASE		0x4809c000
-
-#define OMAP4_MMC_REG_OFFSET	0x100
-
-#define OMAP_MMC_MAX_SLOTS	2
-
-/*
- * struct omap_mmc_dev_attr.flags possibilities
- *
- * OMAP_HSMMC_SUPPORTS_DUAL_VOLT: Some HSMMC controller instances can
- *    operate with either 1.8Vdc or 3.0Vdc card voltages; this flag
- *    should be set if this is the case.  See for example Section 22.5.3
- *    "MMC/SD/SDIO1 Bus Voltage Selection" of the OMAP34xx Multimedia
- *    Device Silicon Revision 3.1.x Revision ZR (July 2011) (SWPU223R).
- *
- * OMAP_HSMMC_BROKEN_MULTIBLOCK_READ: Multiple-block read transfers
- *    don't work correctly on some MMC controller instances on some
- *    OMAP3 SoCs; this flag should be set if this is the case.  See
- *    for example Advisory 2.1.1.128 "MMC: Multiple Block Read
- *    Operation Issue" in _OMAP3530/3525/3515/3503 Silicon Errata_
- *    Revision F (October 2010) (SPRZ278F).
- */
-#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT		BIT(0)
-#define OMAP_HSMMC_BROKEN_MULTIBLOCK_READ	BIT(1)
-
-struct omap_mmc_dev_attr {
-	u8 flags;
-};
-
-struct omap_mmc_platform_data {
-	/* back-link to device */
-	struct device *dev;
-
-	/* number of slots per controller */
-	unsigned nr_slots:2;
-
-	/* set if your board has components or wiring that limits the
-	 * maximum frequency on the MMC bus */
-	unsigned int max_freq;
-
-	/* switch the bus to a new slot */
-	int (*switch_slot)(struct device *dev, int slot);
-	/* initialize board-specific MMC functionality, can be NULL if
-	 * not supported */
-	int (*init)(struct device *dev);
-	void (*cleanup)(struct device *dev);
-	void (*shutdown)(struct device *dev);
-
-	/* To handle board related suspend/resume functionality for MMC */
-	int (*suspend)(struct device *dev, int slot);
-	int (*resume)(struct device *dev, int slot);
-
-	/* Return context loss count due to PM states changing */
-	int (*get_context_loss_count)(struct device *dev);
-
-	/* Integrating attributes from the omap_hwmod layer */
-	u8 controller_flags;
-
-	/* Register offset deviation */
-	u16 reg_offset;
-
-	struct omap_mmc_slot_data {
-
-		/*
-		 * 4/8 wires and any additional host capabilities
-		 * need to OR'd all capabilities (ref. linux/mmc/host.h)
-		 */
-		u8  wires;	/* Used for the MMC driver on omap1 and 2420 */
-		u32 caps;	/* Used for the MMC driver on 2430 and later */
-		u32 pm_caps;	/* PM capabilities of the mmc */
-
-		/*
-		 * nomux means "standard" muxing is wrong on this board, and
-		 * that board-specific code handled it before common init logic.
-		 */
-		unsigned nomux:1;
-
-		/* switch pin can be for card detect (default) or card cover */
-		unsigned cover:1;
-
-		/* use the internal clock */
-		unsigned internal_clock:1;
-
-		/* nonremovable e.g. eMMC */
-		unsigned nonremovable:1;
-
-		/* Try to sleep or power off when possible */
-		unsigned power_saving:1;
-
-		/* If using power_saving and the MMC power is not to go off */
-		unsigned no_off:1;
-
-		/* eMMC does not handle power off when not in sleep state */
-		unsigned no_regulator_off_init:1;
-
-		/* Regulator off remapped to sleep */
-		unsigned vcc_aux_disable_is_sleep:1;
-
-		/* we can put the features above into this variable */
-#define HSMMC_HAS_PBIAS		(1 << 0)
-#define HSMMC_HAS_UPDATED_RESET	(1 << 1)
-#define HSMMC_HAS_HSPE_SUPPORT	(1 << 2)
-		unsigned features;
-
-		int switch_pin;			/* gpio (card detect) */
-		int gpio_wp;			/* gpio (write protect) */
-
-		int (*set_bus_mode)(struct device *dev, int slot, int bus_mode);
-		int (*set_power)(struct device *dev, int slot,
-				 int power_on, int vdd);
-		int (*get_ro)(struct device *dev, int slot);
-		void (*remux)(struct device *dev, int slot, int power_on);
-		/* Call back before enabling / disabling regulators */
-		void (*before_set_reg)(struct device *dev, int slot,
-				       int power_on, int vdd);
-		/* Call back after enabling / disabling regulators */
-		void (*after_set_reg)(struct device *dev, int slot,
-				      int power_on, int vdd);
-		/* if we have special card, init it using this callback */
-		void (*init_card)(struct mmc_card *card);
-
-		/* return MMC cover switch state, can be NULL if not supported.
-		 *
-		 * possible return values:
-		 *   0 - closed
-		 *   1 - open
-		 */
-		int (*get_cover_state)(struct device *dev, int slot);
-
-		const char *name;
-		u32 ocr_mask;
-
-		/* Card detection IRQs */
-		int card_detect_irq;
-		int (*card_detect)(struct device *dev, int slot);
-
-		unsigned int ban_openended:1;
-
-	} slots[OMAP_MMC_MAX_SLOTS];
-};
-
-/* called from board-specific card detection service routine */
-extern void omap_mmc_notify_cover_event(struct device *dev, int slot,
-					int is_closed);
-
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
-void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
-				int nr_controllers);
-void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data);
-#else
-static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
-				int nr_controllers)
-{
-}
-static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
-{
-}
-#endif
-
-extern int omap_msdi_reset(struct omap_hwmod *oh);
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h
deleted file mode 100644
index 324d31b14852..000000000000
--- a/arch/arm/plat-omap/include/plat/multi.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * Support for compiling in multiple OMAP processors
- *
- * Copyright (C) 2010 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __PLAT_OMAP_MULTI_H
-#define __PLAT_OMAP_MULTI_H
-
-/*
- * Test if multicore OMAP support is needed
- */
-#undef MULTI_OMAP1
-#undef MULTI_OMAP2
-#undef OMAP_NAME
-
-#ifdef CONFIG_ARCH_OMAP730
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap730
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap850
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap1510
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap16xx
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP2PLUS
-# if (defined(OMAP_NAME) || defined(MULTI_OMAP1))
-#  error "OMAP1 and OMAP2PLUS can't be selected at the same time"
-# endif
-#endif
-#ifdef CONFIG_SOC_OMAP2420
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap2420
-# endif
-#endif
-#ifdef CONFIG_SOC_OMAP2430
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap2430
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP3
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap3
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap4
-# endif
-#endif
-
-#ifdef CONFIG_SOC_OMAP5
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap5
-# endif
-#endif
-
-#ifdef CONFIG_SOC_AM33XX
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME am33xx
-# endif
-#endif
-
-#endif	/* __PLAT_OMAP_MULTI_H */
diff --git a/arch/arm/plat-omap/include/plat/omap-pm.h b/arch/arm/plat-omap/include/plat/omap-pm.h
deleted file mode 100644
index 67faa7b8fe92..000000000000
--- a/arch/arm/plat-omap/include/plat/omap-pm.h
+++ /dev/null
@@ -1,352 +0,0 @@
-/*
- * omap-pm.h - OMAP power management interface
- *
- * Copyright (C) 2008-2010 Texas Instruments, Inc.
- * Copyright (C) 2008-2010 Nokia Corporation
- * Paul Walmsley
- *
- * Interface developed by (in alphabetical order): Karthik Dasu, Jouni
- * Högander, Tony Lindgren, Rajendra Nayak, Sakari Poussa,
- * Veeramanikandan Raju, Anand Sawant, Igor Stoppa, Paul Walmsley,
- * Richard Woodruff
- */
-
-#ifndef ASM_ARM_ARCH_OMAP_OMAP_PM_H
-#define ASM_ARM_ARCH_OMAP_OMAP_PM_H
-
-#include <linux/device.h>
-#include <linux/cpufreq.h>
-#include <linux/clk.h>
-#include <linux/opp.h>
-
-/*
- * agent_id values for use with omap_pm_set_min_bus_tput():
- *
- * OCP_INITIATOR_AGENT is only valid for devices that can act as
- * initiators -- it represents the device's L3 interconnect
- * connection.  OCP_TARGET_AGENT represents the device's L4
- * interconnect connection.
- */
-#define OCP_TARGET_AGENT		1
-#define OCP_INITIATOR_AGENT		2
-
-/**
- * omap_pm_if_early_init - OMAP PM init code called before clock fw init
- * @mpu_opp_table: array ptr to struct omap_opp for MPU
- * @dsp_opp_table: array ptr to struct omap_opp for DSP
- * @l3_opp_table : array ptr to struct omap_opp for CORE
- *
- * Initialize anything that must be configured before the clock
- * framework starts.  The "_if_" is to avoid name collisions with the
- * PM idle-loop code.
- */
-int __init omap_pm_if_early_init(void);
-
-/**
- * omap_pm_if_init - OMAP PM init code called after clock fw init
- *
- * The main initialization code.  OPP tables are passed in here.  The
- * "_if_" is to avoid name collisions with the PM idle-loop code.
- */
-int __init omap_pm_if_init(void);
-
-/**
- * omap_pm_if_exit - OMAP PM exit code
- *
- * Exit code; currently unused.  The "_if_" is to avoid name
- * collisions with the PM idle-loop code.
- */
-void omap_pm_if_exit(void);
-
-/*
- * Device-driver-originated constraints (via board-*.c files, platform_data)
- */
-
-
-/**
- * omap_pm_set_max_mpu_wakeup_lat - set the maximum MPU wakeup latency
- * @dev: struct device * requesting the constraint
- * @t: maximum MPU wakeup latency in microseconds
- *
- * Request that the maximum interrupt latency for the MPU to be no
- * greater than @t microseconds. "Interrupt latency" in this case is
- * defined as the elapsed time from the occurrence of a hardware or
- * timer interrupt to the time when the device driver's interrupt
- * service routine has been entered by the MPU.
- *
- * It is intended that underlying PM code will use this information to
- * determine what power state to put the MPU powerdomain into, and
- * possibly the CORE powerdomain as well, since interrupt handling
- * code currently runs from SDRAM.  Advanced PM or board*.c code may
- * also configure interrupt controller priorities, OCP bus priorities,
- * CPU speed(s), etc.
- *
- * This function will not affect device wakeup latency, e.g., time
- * elapsed from when a device driver enables a hardware device with
- * clk_enable(), to when the device is ready for register access or
- * other use.  To control this device wakeup latency, use
- * omap_pm_set_max_dev_wakeup_lat()
- *
- * Multiple calls to omap_pm_set_max_mpu_wakeup_lat() will replace the
- * previous t value.  To remove the latency target for the MPU, call
- * with t = -1.
- *
- * XXX This constraint will be deprecated soon in favor of the more
- * general omap_pm_set_max_dev_wakeup_lat()
- *
- * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
- * is not satisfiable, or 0 upon success.
- */
-int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t);
-
-
-/**
- * omap_pm_set_min_bus_tput - set minimum bus throughput needed by device
- * @dev: struct device * requesting the constraint
- * @tbus_id: interconnect to operate on (OCP_{INITIATOR,TARGET}_AGENT)
- * @r: minimum throughput (in KiB/s)
- *
- * Request that the minimum data throughput on the OCP interconnect
- * attached to device @dev interconnect agent @tbus_id be no less
- * than @r KiB/s.
- *
- * It is expected that the OMAP PM or bus code will use this
- * information to set the interconnect clock to run at the lowest
- * possible speed that satisfies all current system users.  The PM or
- * bus code will adjust the estimate based on its model of the bus, so
- * device driver authors should attempt to specify an accurate
- * quantity for their device use case, and let the PM or bus code
- * overestimate the numbers as necessary to handle request/response
- * latency, other competing users on the system, etc.  On OMAP2/3, if
- * a driver requests a minimum L4 interconnect speed constraint, the
- * code will also need to add an minimum L3 interconnect speed
- * constraint,
- *
- * Multiple calls to omap_pm_set_min_bus_tput() will replace the
- * previous rate value for this device.  To remove the interconnect
- * throughput restriction for this device, call with r = 0.
- *
- * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
- * is not satisfiable, or 0 upon success.
- */
-int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r);
-
-
-/**
- * omap_pm_set_max_dev_wakeup_lat - set the maximum device enable latency
- * @req_dev: struct device * requesting the constraint, or NULL if none
- * @dev: struct device * to set the constraint one
- * @t: maximum device wakeup latency in microseconds
- *
- * Request that the maximum amount of time necessary for a device @dev
- * to become accessible after its clocks are enabled should be no
- * greater than @t microseconds.  Specifically, this represents the
- * time from when a device driver enables device clocks with
- * clk_enable(), to when the register reads and writes on the device
- * will succeed.  This function should be called before clk_disable()
- * is called, since the power state transition decision may be made
- * during clk_disable().
- *
- * It is intended that underlying PM code will use this information to
- * determine what power state to put the powerdomain enclosing this
- * device into.
- *
- * Multiple calls to omap_pm_set_max_dev_wakeup_lat() will replace the
- * previous wakeup latency values for this device.  To remove the
- * wakeup latency restriction for this device, call with t = -1.
- *
- * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
- * is not satisfiable, or 0 upon success.
- */
-int omap_pm_set_max_dev_wakeup_lat(struct device *req_dev, struct device *dev,
-				   long t);
-
-
-/**
- * omap_pm_set_max_sdma_lat - set the maximum system DMA transfer start latency
- * @dev: struct device *
- * @t: maximum DMA transfer start latency in microseconds
- *
- * Request that the maximum system DMA transfer start latency for this
- * device 'dev' should be no greater than 't' microseconds.  "DMA
- * transfer start latency" here is defined as the elapsed time from
- * when a device (e.g., McBSP) requests that a system DMA transfer
- * start or continue, to the time at which data starts to flow into
- * that device from the system DMA controller.
- *
- * It is intended that underlying PM code will use this information to
- * determine what power state to put the CORE powerdomain into.
- *
- * Since system DMA transfers may not involve the MPU, this function
- * will not affect MPU wakeup latency.  Use set_max_cpu_lat() to do
- * so.  Similarly, this function will not affect device wakeup latency
- * -- use set_max_dev_wakeup_lat() to affect that.
- *
- * Multiple calls to set_max_sdma_lat() will replace the previous t
- * value for this device.  To remove the maximum DMA latency for this
- * device, call with t = -1.
- *
- * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
- * is not satisfiable, or 0 upon success.
- */
-int omap_pm_set_max_sdma_lat(struct device *dev, long t);
-
-
-/**
- * omap_pm_set_min_clk_rate - set minimum clock rate requested by @dev
- * @dev: struct device * requesting the constraint
- * @clk: struct clk * to set the minimum rate constraint on
- * @r: minimum rate in Hz
- *
- * Request that the minimum clock rate on the device @dev's clk @clk
- * be no less than @r Hz.
- *
- * It is expected that the OMAP PM code will use this information to
- * find an OPP or clock setting that will satisfy this clock rate
- * constraint, along with any other applicable system constraints on
- * the clock rate or corresponding voltage, etc.
- *
- * omap_pm_set_min_clk_rate() differs from the clock code's
- * clk_set_rate() in that it considers other constraints before taking
- * any hardware action, and may change a system OPP rather than just a
- * clock rate.  clk_set_rate() is intended to be a low-level
- * interface.
- *
- * omap_pm_set_min_clk_rate() is easily open to abuse.  A better API
- * would be something like "omap_pm_set_min_dev_performance()";
- * however, there is no easily-generalizable concept of performance
- * that applies to all devices.  Only a device (and possibly the
- * device subsystem) has both the subsystem-specific knowledge, and
- * the hardware IP block-specific knowledge, to translate a constraint
- * on "touchscreen sampling accuracy" or "number of pixels or polygons
- * rendered per second" to a clock rate.  This translation can be
- * dependent on the hardware IP block's revision, or firmware version,
- * and the driver is the only code on the system that has this
- * information and can know how to translate that into a clock rate.
- *
- * The intended use-case for this function is for userspace or other
- * kernel code to communicate a particular performance requirement to
- * a subsystem; then for the subsystem to communicate that requirement
- * to something that is meaningful to the device driver; then for the
- * device driver to convert that requirement to a clock rate, and to
- * then call omap_pm_set_min_clk_rate().
- *
- * Users of this function (such as device drivers) should not simply
- * call this function with some high clock rate to ensure "high
- * performance."  Rather, the device driver should take a performance
- * constraint from its subsystem, such as "render at least X polygons
- * per second," and use some formula or table to convert that into a
- * clock rate constraint given the hardware type and hardware
- * revision.  Device drivers or subsystems should not assume that they
- * know how to make a power/performance tradeoff - some device use
- * cases may tolerate a lower-fidelity device function for lower power
- * consumption; others may demand a higher-fidelity device function,
- * no matter what the power consumption.
- *
- * Multiple calls to omap_pm_set_min_clk_rate() will replace the
- * previous rate value for the device @dev.  To remove the minimum clock
- * rate constraint for the device, call with r = 0.
- *
- * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
- * is not satisfiable, or 0 upon success.
- */
-int omap_pm_set_min_clk_rate(struct device *dev, struct clk *c, long r);
-
-/*
- * DSP Bridge-specific constraints
- */
-
-/**
- * omap_pm_dsp_get_opp_table - get OPP->DSP clock frequency table
- *
- * Intended for use by DSPBridge.  Returns an array of OPP->DSP clock
- * frequency entries.  The final item in the array should have .rate =
- * .opp_id = 0.
- */
-const struct omap_opp *omap_pm_dsp_get_opp_table(void);
-
-/**
- * omap_pm_dsp_set_min_opp - receive desired OPP target ID from DSP Bridge
- * @opp_id: target DSP OPP ID
- *
- * Set a minimum OPP ID for the DSP.  This is intended to be called
- * only from the DSP Bridge MPU-side driver.  Unfortunately, the only
- * information that code receives from the DSP/BIOS load estimator is the
- * target OPP ID; hence, this interface.  No return value.
- */
-void omap_pm_dsp_set_min_opp(u8 opp_id);
-
-/**
- * omap_pm_dsp_get_opp - report the current DSP OPP ID
- *
- * Report the current OPP for the DSP.  Since on OMAP3, the DSP and
- * MPU share a single voltage domain, the OPP ID returned back may
- * represent a higher DSP speed than the OPP requested via
- * omap_pm_dsp_set_min_opp().
- *
- * Returns the current VDD1 OPP ID, or 0 upon error.
- */
-u8 omap_pm_dsp_get_opp(void);
-
-
-/*
- * CPUFreq-originated constraint
- *
- * In the future, this should be handled by custom OPP clocktype
- * functions.
- */
-
-/**
- * omap_pm_cpu_get_freq_table - return a cpufreq_frequency_table array ptr
- *
- * Provide a frequency table usable by CPUFreq for the current chip/board.
- * Returns a pointer to a struct cpufreq_frequency_table array or NULL
- * upon error.
- */
-struct cpufreq_frequency_table **omap_pm_cpu_get_freq_table(void);
-
-/**
- * omap_pm_cpu_set_freq - set the current minimum MPU frequency
- * @f: MPU frequency in Hz
- *
- * Set the current minimum CPU frequency.  The actual CPU frequency
- * used could end up higher if the DSP requested a higher OPP.
- * Intended to be called by plat-omap/cpu_omap.c:omap_target().  No
- * return value.
- */
-void omap_pm_cpu_set_freq(unsigned long f);
-
-/**
- * omap_pm_cpu_get_freq - report the current CPU frequency
- *
- * Returns the current MPU frequency, or 0 upon error.
- */
-unsigned long omap_pm_cpu_get_freq(void);
-
-
-/*
- * Device context loss tracking
- */
-
-/**
- * omap_pm_get_dev_context_loss_count - return count of times dev has lost ctx
- * @dev: struct device *
- *
- * This function returns the number of times that the device @dev has
- * lost its internal context.  This generally occurs on a powerdomain
- * transition to OFF.  Drivers use this as an optimization to avoid restoring
- * context if the device hasn't lost it.  To use, drivers should initially
- * call this in their context save functions and store the result.  Early in
- * the driver's context restore function, the driver should call this function
- * again, and compare the result to the stored counter.  If they differ, the
- * driver must restore device context.   If the number of context losses
- * exceeds the maximum positive integer, the function will wrap to 0 and
- * continue counting.  Returns the number of context losses for this device,
- * or negative value upon error.
- */
-int omap_pm_get_dev_context_loss_count(struct device *dev);
-
-void omap_pm_enable_off_mode(void);
-void omap_pm_disable_off_mode(void);
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/omap-secure.h b/arch/arm/plat-omap/include/plat/omap-secure.h
deleted file mode 100644
index 0e4acd2d2deb..000000000000
--- a/arch/arm/plat-omap/include/plat/omap-secure.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef __OMAP_SECURE_H__
-#define __OMAP_SECURE_H__
-
-#include <linux/types.h>
-
-extern int omap_secure_ram_reserve_memblock(void);
-
-#ifdef CONFIG_OMAP4_ERRATA_I688
-extern int omap_barrier_reserve_memblock(void);
-#else
-static inline void omap_barrier_reserve_memblock(void)
-{ }
-#endif
-#endif /* __OMAP_SECURE_H__ */
diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h
deleted file mode 100644
index 106f50665804..000000000000
--- a/arch/arm/plat-omap/include/plat/omap_device.h
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- * omap_device headers
- *
- * Copyright (C) 2009 Nokia Corporation
- * Paul Walmsley
- *
- * Developed in collaboration with (alphabetical order): Benoit
- * Cousson, Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram
- * Pandita, Sakari Poussa, Anand Sawant, Santosh Shilimkar, Richard
- * Woodruff
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Eventually this type of functionality should either be
- * a) implemented via arch-specific pointers in platform_device
- * or
- * b) implemented as a proper omap_bus/omap_device in Linux, no more
- *    platform_device
- *
- * omap_device differs from omap_hwmod in that it includes external
- * (e.g., board- and system-level) integration details.  omap_hwmod
- * stores hardware data that is invariant for a given OMAP chip.
- *
- * To do:
- * - GPIO integration
- * - regulator integration
- *
- */
-#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_DEVICE_H
-#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_DEVICE_H
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <plat/omap_hwmod.h>
-
-extern struct dev_pm_domain omap_device_pm_domain;
-
-/* omap_device._state values */
-#define OMAP_DEVICE_STATE_UNKNOWN	0
-#define OMAP_DEVICE_STATE_ENABLED	1
-#define OMAP_DEVICE_STATE_IDLE		2
-#define OMAP_DEVICE_STATE_SHUTDOWN	3
-
-/* omap_device.flags values */
-#define OMAP_DEVICE_SUSPENDED BIT(0)
-#define OMAP_DEVICE_NO_IDLE_ON_SUSPEND BIT(1)
-
-/**
- * struct omap_device - omap_device wrapper for platform_devices
- * @pdev: platform_device
- * @hwmods: (one .. many per omap_device)
- * @hwmods_cnt: ARRAY_SIZE() of @hwmods
- * @pm_lats: ptr to an omap_device_pm_latency table
- * @pm_lats_cnt: ARRAY_SIZE() of what is passed to @pm_lats
- * @pm_lat_level: array index of the last odpl entry executed - -1 if never
- * @dev_wakeup_lat: dev wakeup latency in nanoseconds
- * @_dev_wakeup_lat_limit: dev wakeup latency limit in nsec - set by OMAP PM
- * @_state: one of OMAP_DEVICE_STATE_* (see above)
- * @flags: device flags
- * @_driver_status: one of BUS_NOTIFY_*_DRIVER from <linux/device.h>
- *
- * Integrates omap_hwmod data into Linux platform_device.
- *
- * Field names beginning with underscores are for the internal use of
- * the omap_device code.
- *
- */
-struct omap_device {
-	struct platform_device		*pdev;
-	struct omap_hwmod		**hwmods;
-	struct omap_device_pm_latency	*pm_lats;
-	u32				dev_wakeup_lat;
-	u32				_dev_wakeup_lat_limit;
-	unsigned long			_driver_status;
-	u8				pm_lats_cnt;
-	s8				pm_lat_level;
-	u8				hwmods_cnt;
-	u8				_state;
-	u8                              flags;
-};
-
-/* Device driver interface (call via platform_data fn ptrs) */
-
-int omap_device_enable(struct platform_device *pdev);
-int omap_device_idle(struct platform_device *pdev);
-int omap_device_shutdown(struct platform_device *pdev);
-
-/* Core code interface */
-
-struct platform_device *omap_device_build(const char *pdev_name, int pdev_id,
-				      struct omap_hwmod *oh, void *pdata,
-				      int pdata_len,
-				      struct omap_device_pm_latency *pm_lats,
-				      int pm_lats_cnt, int is_early_device);
-
-struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
-					 struct omap_hwmod **oh, int oh_cnt,
-					 void *pdata, int pdata_len,
-					 struct omap_device_pm_latency *pm_lats,
-					 int pm_lats_cnt, int is_early_device);
-
-struct omap_device *omap_device_alloc(struct platform_device *pdev,
-				      struct omap_hwmod **ohs, int oh_cnt,
-				      struct omap_device_pm_latency *pm_lats,
-				      int pm_lats_cnt);
-void omap_device_delete(struct omap_device *od);
-int omap_device_register(struct platform_device *pdev);
-
-void __iomem *omap_device_get_rt_va(struct omap_device *od);
-struct device *omap_device_get_by_hwmod_name(const char *oh_name);
-
-/* OMAP PM interface */
-int omap_device_align_pm_lat(struct platform_device *pdev,
-			     u32 new_wakeup_lat_limit);
-struct powerdomain *omap_device_get_pwrdm(struct omap_device *od);
-int omap_device_get_context_loss_count(struct platform_device *pdev);
-
-/* Other */
-
-int omap_device_assert_hardreset(struct platform_device *pdev,
-				 const char *name);
-int omap_device_deassert_hardreset(struct platform_device *pdev,
-				 const char *name);
-int omap_device_idle_hwmods(struct omap_device *od);
-int omap_device_enable_hwmods(struct omap_device *od);
-
-int omap_device_disable_clocks(struct omap_device *od);
-int omap_device_enable_clocks(struct omap_device *od);
-
-/*
- * Entries should be kept in latency order ascending
- *
- * deact_lat is the maximum number of microseconds required to complete
- * deactivate_func() at the device's slowest OPP.
- *
- * act_lat is the maximum number of microseconds required to complete
- * activate_func() at the device's slowest OPP.
- *
- * This will result in some suboptimal power management decisions at fast
- * OPPs, but avoids having to recompute all device power management decisions
- * if the system shifts from a fast OPP to a slow OPP (in order to meet
- * latency requirements).
- *
- * XXX should deactivate_func/activate_func() take platform_device pointers
- * rather than omap_device pointers?
- */
-struct omap_device_pm_latency {
-	u32 deactivate_lat;
-	u32 deactivate_lat_worst;
-	int (*deactivate_func)(struct omap_device *od);
-	u32 activate_lat;
-	u32 activate_lat_worst;
-	int (*activate_func)(struct omap_device *od);
-	u32 flags;
-};
-
-#define OMAP_DEVICE_LATENCY_AUTO_ADJUST BIT(1)
-
-/* Get omap_device pointer from platform_device pointer */
-static inline struct omap_device *to_omap_device(struct platform_device *pdev)
-{
-	return pdev ? pdev->archdata.od : NULL;
-}
-
-static inline
-void omap_device_disable_idle_on_suspend(struct platform_device *pdev)
-{
-	struct omap_device *od = to_omap_device(pdev);
-
-	od->flags |= OMAP_DEVICE_NO_IDLE_ON_SUSPEND;
-}
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
deleted file mode 100644
index 1db029438022..000000000000
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ /dev/null
@@ -1,682 +0,0 @@
-/*
- * omap_hwmod macros, structures
- *
- * Copyright (C) 2009-2011 Nokia Corporation
- * Copyright (C) 2012 Texas Instruments, Inc.
- * Paul Walmsley
- *
- * Created in collaboration with (alphabetical order): Benoît Cousson,
- * Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari
- * Poussa, Anand Sawant, Santosh Shilimkar, Richard Woodruff
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * These headers and macros are used to define OMAP on-chip module
- * data and their integration with other OMAP modules and Linux.
- * Copious documentation and references can also be found in the
- * omap_hwmod code, in arch/arm/mach-omap2/omap_hwmod.c (as of this
- * writing).
- *
- * To do:
- * - add interconnect error log structures
- * - add pinmuxing
- * - init_conn_id_bit (CONNID_BIT_VECTOR)
- * - implement default hwmod SMS/SDRC flags?
- * - move Linux-specific data ("non-ROM data") out
- *
- */
-#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
-#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/ioport.h>
-#include <linux/spinlock.h>
-#include <plat/cpu.h>
-
-struct omap_device;
-
-extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type1;
-extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2;
-extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3;
-
-/*
- * OCP SYSCONFIG bit shifts/masks TYPE1. These are for IPs compliant
- * with the original PRCM protocol defined for OMAP2420
- */
-#define SYSC_TYPE1_MIDLEMODE_SHIFT	12
-#define SYSC_TYPE1_MIDLEMODE_MASK	(0x3 << SYSC_TYPE1_MIDLEMODE_SHIFT)
-#define SYSC_TYPE1_CLOCKACTIVITY_SHIFT	8
-#define SYSC_TYPE1_CLOCKACTIVITY_MASK	(0x3 << SYSC_TYPE1_CLOCKACTIVITY_SHIFT)
-#define SYSC_TYPE1_SIDLEMODE_SHIFT	3
-#define SYSC_TYPE1_SIDLEMODE_MASK	(0x3 << SYSC_TYPE1_SIDLEMODE_SHIFT)
-#define SYSC_TYPE1_ENAWAKEUP_SHIFT	2
-#define SYSC_TYPE1_ENAWAKEUP_MASK	(1 << SYSC_TYPE1_ENAWAKEUP_SHIFT)
-#define SYSC_TYPE1_SOFTRESET_SHIFT	1
-#define SYSC_TYPE1_SOFTRESET_MASK	(1 << SYSC_TYPE1_SOFTRESET_SHIFT)
-#define SYSC_TYPE1_AUTOIDLE_SHIFT	0
-#define SYSC_TYPE1_AUTOIDLE_MASK	(1 << SYSC_TYPE1_AUTOIDLE_SHIFT)
-
-/*
- * OCP SYSCONFIG bit shifts/masks TYPE2. These are for IPs compliant
- * with the new PRCM protocol defined for new OMAP4 IPs.
- */
-#define SYSC_TYPE2_SOFTRESET_SHIFT	0
-#define SYSC_TYPE2_SOFTRESET_MASK	(1 << SYSC_TYPE2_SOFTRESET_SHIFT)
-#define SYSC_TYPE2_SIDLEMODE_SHIFT	2
-#define SYSC_TYPE2_SIDLEMODE_MASK	(0x3 << SYSC_TYPE2_SIDLEMODE_SHIFT)
-#define SYSC_TYPE2_MIDLEMODE_SHIFT	4
-#define SYSC_TYPE2_MIDLEMODE_MASK	(0x3 << SYSC_TYPE2_MIDLEMODE_SHIFT)
-#define SYSC_TYPE2_DMADISABLE_SHIFT	16
-#define SYSC_TYPE2_DMADISABLE_MASK	(0x1 << SYSC_TYPE2_DMADISABLE_SHIFT)
-
-/*
- * OCP SYSCONFIG bit shifts/masks TYPE3.
- * This is applicable for some IPs present in AM33XX
- */
-#define SYSC_TYPE3_SIDLEMODE_SHIFT	0
-#define SYSC_TYPE3_SIDLEMODE_MASK	(0x3 << SYSC_TYPE3_SIDLEMODE_SHIFT)
-#define SYSC_TYPE3_MIDLEMODE_SHIFT	2
-#define SYSC_TYPE3_MIDLEMODE_MASK	(0x3 << SYSC_TYPE3_MIDLEMODE_SHIFT)
-
-/* OCP SYSSTATUS bit shifts/masks */
-#define SYSS_RESETDONE_SHIFT		0
-#define SYSS_RESETDONE_MASK		(1 << SYSS_RESETDONE_SHIFT)
-
-/* Master standby/slave idle mode flags */
-#define HWMOD_IDLEMODE_FORCE		(1 << 0)
-#define HWMOD_IDLEMODE_NO		(1 << 1)
-#define HWMOD_IDLEMODE_SMART		(1 << 2)
-#define HWMOD_IDLEMODE_SMART_WKUP	(1 << 3)
-
-/* modulemode control type (SW or HW) */
-#define MODULEMODE_HWCTRL		1
-#define MODULEMODE_SWCTRL		2
-
-
-/**
- * struct omap_hwmod_mux_info - hwmod specific mux configuration
- * @pads:              array of omap_device_pad entries
- * @nr_pads:           number of omap_device_pad entries
- *
- * Note that this is currently built during init as needed.
- */
-struct omap_hwmod_mux_info {
-	int				nr_pads;
-	struct omap_device_pad		*pads;
-	int				nr_pads_dynamic;
-	struct omap_device_pad		**pads_dynamic;
-	int				*irqs;
-	bool				enabled;
-};
-
-/**
- * struct omap_hwmod_irq_info - MPU IRQs used by the hwmod
- * @name: name of the IRQ channel (module local name)
- * @irq: IRQ channel ID (should be non-negative except -1 = terminator)
- *
- * @name should be something short, e.g., "tx" or "rx".  It is for use
- * by platform_get_resource_byname().  It is defined locally to the
- * hwmod.
- */
-struct omap_hwmod_irq_info {
-	const char	*name;
-	s16		irq;
-};
-
-/**
- * struct omap_hwmod_dma_info - DMA channels used by the hwmod
- * @name: name of the DMA channel (module local name)
- * @dma_req: DMA request ID (should be non-negative except -1 = terminator)
- *
- * @name should be something short, e.g., "tx" or "rx".  It is for use
- * by platform_get_resource_byname().  It is defined locally to the
- * hwmod.
- */
-struct omap_hwmod_dma_info {
-	const char	*name;
-	s16		dma_req;
-};
-
-/**
- * struct omap_hwmod_rst_info - IPs reset lines use by hwmod
- * @name: name of the reset line (module local name)
- * @rst_shift: Offset of the reset bit
- * @st_shift: Offset of the reset status bit (OMAP2/3 only)
- *
- * @name should be something short, e.g., "cpu0" or "rst". It is defined
- * locally to the hwmod.
- */
-struct omap_hwmod_rst_info {
-	const char	*name;
-	u8		rst_shift;
-	u8		st_shift;
-};
-
-/**
- * struct omap_hwmod_opt_clk - optional clocks used by this hwmod
- * @role: "sys", "32k", "tv", etc -- for use in clk_get()
- * @clk: opt clock: OMAP clock name
- * @_clk: pointer to the struct clk (filled in at runtime)
- *
- * The module's interface clock and main functional clock should not
- * be added as optional clocks.
- */
-struct omap_hwmod_opt_clk {
-	const char	*role;
-	const char	*clk;
-	struct clk	*_clk;
-};
-
-
-/* omap_hwmod_omap2_firewall.flags bits */
-#define OMAP_FIREWALL_L3		(1 << 0)
-#define OMAP_FIREWALL_L4		(1 << 1)
-
-/**
- * struct omap_hwmod_omap2_firewall - OMAP2/3 device firewall data
- * @l3_perm_bit: bit shift for L3_PM_*_PERMISSION_*
- * @l4_fw_region: L4 firewall region ID
- * @l4_prot_group: L4 protection group ID
- * @flags: (see omap_hwmod_omap2_firewall.flags macros above)
- */
-struct omap_hwmod_omap2_firewall {
-	u8 l3_perm_bit;
-	u8 l4_fw_region;
-	u8 l4_prot_group;
-	u8 flags;
-};
-
-
-/*
- * omap_hwmod_addr_space.flags bits
- *
- * ADDR_MAP_ON_INIT: Map this address space during omap_hwmod init.
- * ADDR_TYPE_RT: Address space contains module register target data.
- */
-#define ADDR_MAP_ON_INIT	(1 << 0)	/* XXX does not belong */
-#define ADDR_TYPE_RT		(1 << 1)
-
-/**
- * struct omap_hwmod_addr_space - address space handled by the hwmod
- * @name: name of the address space
- * @pa_start: starting physical address
- * @pa_end: ending physical address
- * @flags: (see omap_hwmod_addr_space.flags macros above)
- *
- * Address space doesn't necessarily follow physical interconnect
- * structure.  GPMC is one example.
- */
-struct omap_hwmod_addr_space {
-	const char *name;
-	u32 pa_start;
-	u32 pa_end;
-	u8 flags;
-};
-
-
-/*
- * omap_hwmod_ocp_if.user bits: these indicate the initiators that use this
- * interface to interact with the hwmod.  Used to add sleep dependencies
- * when the module is enabled or disabled.
- */
-#define OCP_USER_MPU			(1 << 0)
-#define OCP_USER_SDMA			(1 << 1)
-#define OCP_USER_DSP			(1 << 2)
-#define OCP_USER_IVA			(1 << 3)
-
-/* omap_hwmod_ocp_if.flags bits */
-#define OCPIF_SWSUP_IDLE		(1 << 0)
-#define OCPIF_CAN_BURST			(1 << 1)
-
-/* omap_hwmod_ocp_if._int_flags possibilities */
-#define _OCPIF_INT_FLAGS_REGISTERED	(1 << 0)
-
-
-/**
- * struct omap_hwmod_ocp_if - OCP interface data
- * @master: struct omap_hwmod that initiates OCP transactions on this link
- * @slave: struct omap_hwmod that responds to OCP transactions on this link
- * @addr: address space associated with this link
- * @clk: interface clock: OMAP clock name
- * @_clk: pointer to the interface struct clk (filled in at runtime)
- * @fw: interface firewall data
- * @width: OCP data width
- * @user: initiators using this interface (see OCP_USER_* macros above)
- * @flags: OCP interface flags (see OCPIF_* macros above)
- * @_int_flags: internal flags (see _OCPIF_INT_FLAGS* macros above)
- *
- * It may also be useful to add a tag_cnt field for OCP2.x devices.
- *
- * Parameter names beginning with an underscore are managed internally by
- * the omap_hwmod code and should not be set during initialization.
- */
-struct omap_hwmod_ocp_if {
-	struct omap_hwmod		*master;
-	struct omap_hwmod		*slave;
-	struct omap_hwmod_addr_space	*addr;
-	const char			*clk;
-	struct clk			*_clk;
-	union {
-		struct omap_hwmod_omap2_firewall omap2;
-	}				fw;
-	u8				width;
-	u8				user;
-	u8				flags;
-	u8				_int_flags;
-};
-
-
-/* Macros for use in struct omap_hwmod_sysconfig */
-
-/* Flags for use in omap_hwmod_sysconfig.idlemodes */
-#define MASTER_STANDBY_SHIFT	4
-#define SLAVE_IDLE_SHIFT	0
-#define SIDLE_FORCE		(HWMOD_IDLEMODE_FORCE << SLAVE_IDLE_SHIFT)
-#define SIDLE_NO		(HWMOD_IDLEMODE_NO << SLAVE_IDLE_SHIFT)
-#define SIDLE_SMART		(HWMOD_IDLEMODE_SMART << SLAVE_IDLE_SHIFT)
-#define SIDLE_SMART_WKUP	(HWMOD_IDLEMODE_SMART_WKUP << SLAVE_IDLE_SHIFT)
-#define MSTANDBY_FORCE		(HWMOD_IDLEMODE_FORCE << MASTER_STANDBY_SHIFT)
-#define MSTANDBY_NO		(HWMOD_IDLEMODE_NO << MASTER_STANDBY_SHIFT)
-#define MSTANDBY_SMART		(HWMOD_IDLEMODE_SMART << MASTER_STANDBY_SHIFT)
-#define MSTANDBY_SMART_WKUP	(HWMOD_IDLEMODE_SMART_WKUP << MASTER_STANDBY_SHIFT)
-
-/* omap_hwmod_sysconfig.sysc_flags capability flags */
-#define SYSC_HAS_AUTOIDLE	(1 << 0)
-#define SYSC_HAS_SOFTRESET	(1 << 1)
-#define SYSC_HAS_ENAWAKEUP	(1 << 2)
-#define SYSC_HAS_EMUFREE	(1 << 3)
-#define SYSC_HAS_CLOCKACTIVITY	(1 << 4)
-#define SYSC_HAS_SIDLEMODE	(1 << 5)
-#define SYSC_HAS_MIDLEMODE	(1 << 6)
-#define SYSS_HAS_RESET_STATUS	(1 << 7)
-#define SYSC_NO_CACHE		(1 << 8)  /* XXX SW flag, belongs elsewhere */
-#define SYSC_HAS_RESET_STATUS	(1 << 9)
-#define SYSC_HAS_DMADISABLE	(1 << 10)
-
-/* omap_hwmod_sysconfig.clockact flags */
-#define CLOCKACT_TEST_BOTH	0x0
-#define CLOCKACT_TEST_MAIN	0x1
-#define CLOCKACT_TEST_ICLK	0x2
-#define CLOCKACT_TEST_NONE	0x3
-
-/**
- * struct omap_hwmod_sysc_fields - hwmod OCP_SYSCONFIG register field offsets.
- * @midle_shift: Offset of the midle bit
- * @clkact_shift: Offset of the clockactivity bit
- * @sidle_shift: Offset of the sidle bit
- * @enwkup_shift: Offset of the enawakeup bit
- * @srst_shift: Offset of the softreset bit
- * @autoidle_shift: Offset of the autoidle bit
- * @dmadisable_shift: Offset of the dmadisable bit
- */
-struct omap_hwmod_sysc_fields {
-	u8 midle_shift;
-	u8 clkact_shift;
-	u8 sidle_shift;
-	u8 enwkup_shift;
-	u8 srst_shift;
-	u8 autoidle_shift;
-	u8 dmadisable_shift;
-};
-
-/**
- * struct omap_hwmod_class_sysconfig - hwmod class OCP_SYS* data
- * @rev_offs: IP block revision register offset (from module base addr)
- * @sysc_offs: OCP_SYSCONFIG register offset (from module base addr)
- * @syss_offs: OCP_SYSSTATUS register offset (from module base addr)
- * @srst_udelay: Delay needed after doing a softreset in usecs
- * @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART}
- * @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported
- * @clockact: the default value of the module CLOCKACTIVITY bits
- *
- * @clockact describes to the module which clocks are likely to be
- * disabled when the PRCM issues its idle request to the module.  Some
- * modules have separate clockdomains for the interface clock and main
- * functional clock, and can check whether they should acknowledge the
- * idle request based on the internal module functionality that has
- * been associated with the clocks marked in @clockact.  This field is
- * only used if HWMOD_SET_DEFAULT_CLOCKACT is set (see below)
- *
- * @sysc_fields: structure containing the offset positions of various bits in
- * SYSCONFIG register. This can be populated using omap_hwmod_sysc_type1 or
- * omap_hwmod_sysc_type2 defined in omap_hwmod_common_data.c depending on
- * whether the device ip is compliant with the original PRCM protocol
- * defined for OMAP2420 or the new PRCM protocol for new OMAP4 IPs.
- * If the device follows a different scheme for the sysconfig register ,
- * then this field has to be populated with the correct offset structure.
- */
-struct omap_hwmod_class_sysconfig {
-	u32 rev_offs;
-	u32 sysc_offs;
-	u32 syss_offs;
-	u16 sysc_flags;
-	struct omap_hwmod_sysc_fields *sysc_fields;
-	u8 srst_udelay;
-	u8 idlemodes;
-	u8 clockact;
-};
-
-/**
- * struct omap_hwmod_omap2_prcm - OMAP2/3-specific PRCM data
- * @module_offs: PRCM submodule offset from the start of the PRM/CM
- * @prcm_reg_id: PRCM register ID (e.g., 3 for CM_AUTOIDLE3)
- * @module_bit: register bit shift for AUTOIDLE, WKST, WKEN, GRPSEL regs
- * @idlest_reg_id: IDLEST register ID (e.g., 3 for CM_IDLEST3)
- * @idlest_idle_bit: register bit shift for CM_IDLEST slave idle bit
- * @idlest_stdby_bit: register bit shift for CM_IDLEST master standby bit
- *
- * @prcm_reg_id and @module_bit are specific to the AUTOIDLE, WKST,
- * WKEN, GRPSEL registers.  In an ideal world, no extra information
- * would be needed for IDLEST information, but alas, there are some
- * exceptions, so @idlest_reg_id, @idlest_idle_bit, @idlest_stdby_bit
- * are needed for the IDLEST registers (c.f. 2430 I2CHS, 3430 USBHOST)
- */
-struct omap_hwmod_omap2_prcm {
-	s16 module_offs;
-	u8 prcm_reg_id;
-	u8 module_bit;
-	u8 idlest_reg_id;
-	u8 idlest_idle_bit;
-	u8 idlest_stdby_bit;
-};
-
-/*
- * Possible values for struct omap_hwmod_omap4_prcm.flags
- *
- * HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT: Some IP blocks don't have a PRCM
- *     module-level context loss register associated with them; this
- *     flag bit should be set in those cases
- */
-#define HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT		(1 << 0)
-
-/**
- * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
- * @clkctrl_reg: PRCM address of the clock control register
- * @rstctrl_reg: address of the XXX_RSTCTRL register located in the PRM
- * @lostcontext_mask: bitmask for selecting bits from RM_*_CONTEXT register
- * @rstst_reg: (AM33XX only) address of the XXX_RSTST register in the PRM
- * @submodule_wkdep_bit: bit shift of the WKDEP range
- * @flags: PRCM register capabilities for this IP block
- *
- * If @lostcontext_mask is not defined, context loss check code uses
- * whole register without masking. @lostcontext_mask should only be
- * defined in cases where @context_offs register is shared by two or
- * more hwmods.
- */
-struct omap_hwmod_omap4_prcm {
-	u16		clkctrl_offs;
-	u16		rstctrl_offs;
-	u16		rstst_offs;
-	u16		context_offs;
-	u32		lostcontext_mask;
-	u8		submodule_wkdep_bit;
-	u8		modulemode;
-	u8		flags;
-};
-
-
-/*
- * omap_hwmod.flags definitions
- *
- * HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out
- *     of idle, rather than relying on module smart-idle
- * HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out
- *     of standby, rather than relying on module smart-standby
- * HWMOD_INIT_NO_RESET: don't reset this module at boot - important for
- *     SDRAM controller, etc. XXX probably belongs outside the main hwmod file
- *     XXX Should be HWMOD_SETUP_NO_RESET
- * HWMOD_INIT_NO_IDLE: don't idle this module at boot - important for SDRAM
- *     controller, etc. XXX probably belongs outside the main hwmod file
- *     XXX Should be HWMOD_SETUP_NO_IDLE
- * HWMOD_NO_OCP_AUTOIDLE: disable module autoidle (OCP_SYSCONFIG.AUTOIDLE)
- *     when module is enabled, rather than the default, which is to
- *     enable autoidle
- * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup
- * HWMOD_NO_IDLEST: this module does not have idle status - this is the case
- *     only for few initiator modules on OMAP2 & 3.
- * HWMOD_CONTROL_OPT_CLKS_IN_RESET: Enable all optional clocks during reset.
- *     This is needed for devices like DSS that require optional clocks enabled
- *     in order to complete the reset. Optional clocks will be disabled
- *     again after the reset.
- * HWMOD_16BIT_REG: Module has 16bit registers
- * HWMOD_EXT_OPT_MAIN_CLK: The only main functional clock source for
- *     this IP block comes from an off-chip source and is not always
- *     enabled.  This prevents the hwmod code from being able to
- *     enable and reset the IP block early.  XXX Eventually it should
- *     be possible to query the clock framework for this information.
- */
-#define HWMOD_SWSUP_SIDLE			(1 << 0)
-#define HWMOD_SWSUP_MSTANDBY			(1 << 1)
-#define HWMOD_INIT_NO_RESET			(1 << 2)
-#define HWMOD_INIT_NO_IDLE			(1 << 3)
-#define HWMOD_NO_OCP_AUTOIDLE			(1 << 4)
-#define HWMOD_SET_DEFAULT_CLOCKACT		(1 << 5)
-#define HWMOD_NO_IDLEST				(1 << 6)
-#define HWMOD_CONTROL_OPT_CLKS_IN_RESET		(1 << 7)
-#define HWMOD_16BIT_REG				(1 << 8)
-#define HWMOD_EXT_OPT_MAIN_CLK			(1 << 9)
-
-/*
- * omap_hwmod._int_flags definitions
- * These are for internal use only and are managed by the omap_hwmod code.
- *
- * _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module
- * _HWMOD_WAKEUP_ENABLED: set when the omap_hwmod code has enabled ENAWAKEUP
- * _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached
- * _HWMOD_SKIP_ENABLE: set if hwmod enabled during init (HWMOD_INIT_NO_IDLE) -
- *     causes the first call to _enable() to only update the pinmux
- */
-#define _HWMOD_NO_MPU_PORT			(1 << 0)
-#define _HWMOD_WAKEUP_ENABLED			(1 << 1)
-#define _HWMOD_SYSCONFIG_LOADED			(1 << 2)
-#define _HWMOD_SKIP_ENABLE			(1 << 3)
-
-/*
- * omap_hwmod._state definitions
- *
- * INITIALIZED: reset (optionally), initialized, enabled, disabled
- *              (optionally)
- *
- *
- */
-#define _HWMOD_STATE_UNKNOWN			0
-#define _HWMOD_STATE_REGISTERED			1
-#define _HWMOD_STATE_CLKS_INITED		2
-#define _HWMOD_STATE_INITIALIZED		3
-#define _HWMOD_STATE_ENABLED			4
-#define _HWMOD_STATE_IDLE			5
-#define _HWMOD_STATE_DISABLED			6
-
-/**
- * struct omap_hwmod_class - the type of an IP block
- * @name: name of the hwmod_class
- * @sysc: device SYSCONFIG/SYSSTATUS register data
- * @rev: revision of the IP class
- * @pre_shutdown: ptr to fn to be executed immediately prior to device shutdown
- * @reset: ptr to fn to be executed in place of the standard hwmod reset fn
- *
- * Represent the class of a OMAP hardware "modules" (e.g. timer,
- * smartreflex, gpio, uart...)
- *
- * @pre_shutdown is a function that will be run immediately before
- * hwmod clocks are disabled, etc.  It is intended for use for hwmods
- * like the MPU watchdog, which cannot be disabled with the standard
- * omap_hwmod_shutdown().  The function should return 0 upon success,
- * or some negative error upon failure.  Returning an error will cause
- * omap_hwmod_shutdown() to abort the device shutdown and return an
- * error.
- *
- * If @reset is defined, then the function it points to will be
- * executed in place of the standard hwmod _reset() code in
- * mach-omap2/omap_hwmod.c.  This is needed for IP blocks which have
- * unusual reset sequences - usually processor IP blocks like the IVA.
- */
-struct omap_hwmod_class {
-	const char				*name;
-	struct omap_hwmod_class_sysconfig	*sysc;
-	u32					rev;
-	int					(*pre_shutdown)(struct omap_hwmod *oh);
-	int					(*reset)(struct omap_hwmod *oh);
-};
-
-/**
- * struct omap_hwmod_link - internal structure linking hwmods with ocp_ifs
- * @ocp_if: OCP interface structure record pointer
- * @node: list_head pointing to next struct omap_hwmod_link in a list
- */
-struct omap_hwmod_link {
-	struct omap_hwmod_ocp_if	*ocp_if;
-	struct list_head		node;
-};
-
-/**
- * struct omap_hwmod - integration data for OMAP hardware "modules" (IP blocks)
- * @name: name of the hwmod
- * @class: struct omap_hwmod_class * to the class of this hwmod
- * @od: struct omap_device currently associated with this hwmod (internal use)
- * @mpu_irqs: ptr to an array of MPU IRQs
- * @sdma_reqs: ptr to an array of System DMA request IDs
- * @prcm: PRCM data pertaining to this hwmod
- * @main_clk: main clock: OMAP clock name
- * @_clk: pointer to the main struct clk (filled in at runtime)
- * @opt_clks: other device clocks that drivers can request (0..*)
- * @voltdm: pointer to voltage domain (filled in at runtime)
- * @dev_attr: arbitrary device attributes that can be passed to the driver
- * @_sysc_cache: internal-use hwmod flags
- * @_mpu_rt_va: cached register target start address (internal use)
- * @_mpu_port: cached MPU register target slave (internal use)
- * @opt_clks_cnt: number of @opt_clks
- * @master_cnt: number of @master entries
- * @slaves_cnt: number of @slave entries
- * @response_lat: device OCP response latency (in interface clock cycles)
- * @_int_flags: internal-use hwmod flags
- * @_state: internal-use hwmod state
- * @_postsetup_state: internal-use state to leave the hwmod in after _setup()
- * @flags: hwmod flags (documented below)
- * @_lock: spinlock serializing operations on this hwmod
- * @node: list node for hwmod list (internal use)
- *
- * @main_clk refers to this module's "main clock," which for our
- * purposes is defined as "the functional clock needed for register
- * accesses to complete."  Modules may not have a main clock if the
- * interface clock also serves as a main clock.
- *
- * Parameter names beginning with an underscore are managed internally by
- * the omap_hwmod code and should not be set during initialization.
- *
- * @masters and @slaves are now deprecated.
- */
-struct omap_hwmod {
-	const char			*name;
-	struct omap_hwmod_class		*class;
-	struct omap_device		*od;
-	struct omap_hwmod_mux_info	*mux;
-	struct omap_hwmod_irq_info	*mpu_irqs;
-	struct omap_hwmod_dma_info	*sdma_reqs;
-	struct omap_hwmod_rst_info	*rst_lines;
-	union {
-		struct omap_hwmod_omap2_prcm omap2;
-		struct omap_hwmod_omap4_prcm omap4;
-	}				prcm;
-	const char			*main_clk;
-	struct clk			*_clk;
-	struct omap_hwmod_opt_clk	*opt_clks;
-	char				*clkdm_name;
-	struct clockdomain		*clkdm;
-	struct list_head		master_ports; /* connect to *_IA */
-	struct list_head		slave_ports; /* connect to *_TA */
-	void				*dev_attr;
-	u32				_sysc_cache;
-	void __iomem			*_mpu_rt_va;
-	spinlock_t			_lock;
-	struct list_head		node;
-	struct omap_hwmod_ocp_if	*_mpu_port;
-	u16				flags;
-	u8				response_lat;
-	u8				rst_lines_cnt;
-	u8				opt_clks_cnt;
-	u8				masters_cnt;
-	u8				slaves_cnt;
-	u8				hwmods_cnt;
-	u8				_int_flags;
-	u8				_state;
-	u8				_postsetup_state;
-};
-
-struct omap_hwmod *omap_hwmod_lookup(const char *name);
-int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
-			void *data);
-
-int __init omap_hwmod_setup_one(const char *name);
-
-int omap_hwmod_enable(struct omap_hwmod *oh);
-int omap_hwmod_idle(struct omap_hwmod *oh);
-int omap_hwmod_shutdown(struct omap_hwmod *oh);
-
-int omap_hwmod_assert_hardreset(struct omap_hwmod *oh, const char *name);
-int omap_hwmod_deassert_hardreset(struct omap_hwmod *oh, const char *name);
-int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name);
-
-int omap_hwmod_enable_clocks(struct omap_hwmod *oh);
-int omap_hwmod_disable_clocks(struct omap_hwmod *oh);
-
-int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode);
-int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle);
-
-int omap_hwmod_reset(struct omap_hwmod *oh);
-void omap_hwmod_ocp_barrier(struct omap_hwmod *oh);
-
-void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs);
-u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs);
-int omap_hwmod_softreset(struct omap_hwmod *oh);
-
-int omap_hwmod_count_resources(struct omap_hwmod *oh);
-int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
-int omap_hwmod_fill_dma_resources(struct omap_hwmod *oh, struct resource *res);
-int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type,
-				   const char *name, struct resource *res);
-
-struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh);
-void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh);
-
-int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh,
-				 struct omap_hwmod *init_oh);
-int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh,
-				 struct omap_hwmod *init_oh);
-
-int omap_hwmod_enable_wakeup(struct omap_hwmod *oh);
-int omap_hwmod_disable_wakeup(struct omap_hwmod *oh);
-
-int omap_hwmod_for_each_by_class(const char *classname,
-				 int (*fn)(struct omap_hwmod *oh,
-					   void *user),
-				 void *user);
-
-int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state);
-int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh);
-
-int omap_hwmod_no_setup_reset(struct omap_hwmod *oh);
-
-int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx);
-
-extern void __init omap_hwmod_init(void);
-
-const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh);
-
-/*
- * Chip variant-specific hwmod init routines - XXX should be converted
- * to use initcalls once the initial boot ordering is straightened out
- */
-extern int omap2420_hwmod_init(void);
-extern int omap2430_hwmod_init(void);
-extern int omap3xxx_hwmod_init(void);
-extern int omap44xx_hwmod_init(void);
-extern int am33xx_hwmod_init(void);
-
-extern int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois);
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h
deleted file mode 100644
index 36d6a7666216..000000000000
--- a/arch/arm/plat-omap/include/plat/sdrc.h
+++ /dev/null
@@ -1,164 +0,0 @@
-#ifndef ____ASM_ARCH_SDRC_H
-#define ____ASM_ARCH_SDRC_H
-
-/*
- * OMAP2/3 SDRC/SMS register definitions
- *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2008 Nokia Corporation
- *
- * Tony Lindgren
- * Paul Walmsley
- * Richard Woodruff
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-
-/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
-
-#define SDRC_SYSCONFIG		0x010
-#define SDRC_CS_CFG		0x040
-#define SDRC_SHARING		0x044
-#define SDRC_ERR_TYPE		0x04C
-#define SDRC_DLLA_CTRL		0x060
-#define SDRC_DLLA_STATUS	0x064
-#define SDRC_DLLB_CTRL		0x068
-#define SDRC_DLLB_STATUS	0x06C
-#define SDRC_POWER		0x070
-#define SDRC_MCFG_0		0x080
-#define SDRC_MR_0		0x084
-#define SDRC_EMR2_0		0x08c
-#define SDRC_ACTIM_CTRL_A_0	0x09c
-#define SDRC_ACTIM_CTRL_B_0	0x0a0
-#define SDRC_RFR_CTRL_0		0x0a4
-#define SDRC_MANUAL_0		0x0a8
-#define SDRC_MCFG_1		0x0B0
-#define SDRC_MR_1		0x0B4
-#define SDRC_EMR2_1		0x0BC
-#define SDRC_ACTIM_CTRL_A_1	0x0C4
-#define SDRC_ACTIM_CTRL_B_1	0x0C8
-#define SDRC_RFR_CTRL_1		0x0D4
-#define SDRC_MANUAL_1		0x0D8
-
-#define SDRC_POWER_AUTOCOUNT_SHIFT	8
-#define SDRC_POWER_AUTOCOUNT_MASK	(0xffff << SDRC_POWER_AUTOCOUNT_SHIFT)
-#define SDRC_POWER_CLKCTRL_SHIFT	4
-#define SDRC_POWER_CLKCTRL_MASK		(0x3 << SDRC_POWER_CLKCTRL_SHIFT)
-#define SDRC_SELF_REFRESH_ON_AUTOCOUNT	(0x2 << SDRC_POWER_CLKCTRL_SHIFT)
-
-/*
- * These values represent the number of memory clock cycles between
- * autorefresh initiation.  They assume 1 refresh per 64 ms (JEDEC), 8192
- * rows per device, and include a subtraction of a 50 cycle window in the
- * event that the autorefresh command is delayed due to other SDRC activity.
- * The '| 1' sets the ARE field to send one autorefresh when the autorefresh
- * counter reaches 0.
- *
- * These represent optimal values for common parts, it won't work for all.
- * As long as you scale down, most parameters are still work, they just
- * become sub-optimal. The RFR value goes in the opposite direction. If you
- * don't adjust it down as your clock period increases the refresh interval
- * will not be met. Setting all parameters for complete worst case may work,
- * but may cut memory performance by 2x. Due to errata the DLLs need to be
- * unlocked and their value needs run time calibration.	A dynamic call is
- * need for that as no single right value exists acorss production samples.
- *
- * Only the FULL speed values are given. Current code is such that rate
- * changes must be made at DPLLoutx2. The actual value adjustment for low
- * frequency operation will be handled by omap_set_performance()
- *
- * By having the boot loader boot up in the fastest L4 speed available likely
- * will result in something which you can switch between.
- */
-#define SDRC_RFR_CTRL_165MHz	(0x00044c00 | 1)
-#define SDRC_RFR_CTRL_133MHz	(0x0003de00 | 1)
-#define SDRC_RFR_CTRL_100MHz	(0x0002da01 | 1)
-#define SDRC_RFR_CTRL_110MHz	(0x0002da01 | 1) /* Need to calc */
-#define SDRC_RFR_CTRL_BYPASS	(0x00005000 | 1) /* Need to calc */
-
-
-/*
- * SMS register access
- */
-
-#define OMAP242X_SMS_REGADDR(reg)					\
-		(void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg)
-#define OMAP243X_SMS_REGADDR(reg)					\
-		(void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg)
-#define OMAP343X_SMS_REGADDR(reg)					\
-		(void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg)
-
-/* SMS register offsets - read/write with sms_{read,write}_reg() */
-
-#define SMS_SYSCONFIG			0x010
-#define SMS_ROT_CONTROL(context)	(0x180 + 0x10 * context)
-#define SMS_ROT_SIZE(context)		(0x184 + 0x10 * context)
-#define SMS_ROT_PHYSICAL_BA(context)	(0x188 + 0x10 * context)
-/* REVISIT: fill in other SMS registers here */
-
-
-#ifndef __ASSEMBLER__
-
-/**
- * struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate
- * @rate: SDRC clock rate (in Hz)
- * @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate
- * @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate
- * @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate
- * @mr: Value to program to SDRC_MR for this rate
- *
- * This structure holds a pre-computed set of register values for the
- * SDRC for a given SDRC clock rate and SDRAM chip.  These are
- * intended to be pre-computed and specified in an array in the board-*.c
- * files.  The structure is keyed off the 'rate' field.
- */
-struct omap_sdrc_params {
-	unsigned long rate;
-	u32 actim_ctrla;
-	u32 actim_ctrlb;
-	u32 rfr_ctrl;
-	u32 mr;
-};
-
-#ifdef CONFIG_SOC_HAS_OMAP2_SDRC
-void omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
-			    struct omap_sdrc_params *sdrc_cs1);
-#else
-static inline void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
-					  struct omap_sdrc_params *sdrc_cs1) {};
-#endif
-
-int omap2_sdrc_get_params(unsigned long r,
-			  struct omap_sdrc_params **sdrc_cs0,
-			  struct omap_sdrc_params **sdrc_cs1);
-void omap2_sms_save_context(void);
-void omap2_sms_restore_context(void);
-
-void omap2_sms_write_rot_control(u32 val, unsigned ctx);
-void omap2_sms_write_rot_size(u32 val, unsigned ctx);
-void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx);
-
-#ifdef CONFIG_ARCH_OMAP2
-
-struct memory_timings {
-	u32 m_type;		/* ddr = 1, sdr = 0 */
-	u32 dll_mode;		/* use lock mode = 1, unlock mode = 0 */
-	u32 slow_dll_ctrl;	/* unlock mode, dll value for slow speed */
-	u32 fast_dll_ctrl;	/* unlock mode, dll value for fast speed */
-	u32 base_cs;		/* base chip select to use for calculations */
-};
-
-extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode);
-struct omap_sdrc_params *rx51_get_sdram_timings(void);
-
-u32 omap2xxx_sdrc_dll_is_unlocked(void);
-u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
-
-#endif  /* CONFIG_ARCH_OMAP2 */
-
-#endif  /* __ASSEMBLER__ */
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
deleted file mode 100644
index b780470d03ea..000000000000
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/serial.h
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_SERIAL_H
-#define __ASM_ARCH_SERIAL_H
-
-#include <linux/init.h>
-
-/*
- * Memory entry used for the DEBUG_LL UART configuration, relative to
- * start of RAM. See also uncompress.h and debug-macro.S.
- *
- * Note that using a memory location for storing the UART configuration
- * has at least two limitations:
- *
- * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the
- *    uncompress code could then partially overwrite itself
- * 2. We assume printascii is called at least once before paging_init,
- *    and addruart has a chance to read OMAP_UART_INFO
- */
-#define OMAP_UART_INFO_OFS	0x3ffc
-
-/* OMAP1 serial ports */
-#define OMAP1_UART1_BASE	0xfffb0000
-#define OMAP1_UART2_BASE	0xfffb0800
-#define OMAP1_UART3_BASE	0xfffb9800
-
-/* OMAP2 serial ports */
-#define OMAP2_UART1_BASE	0x4806a000
-#define OMAP2_UART2_BASE	0x4806c000
-#define OMAP2_UART3_BASE	0x4806e000
-
-/* OMAP3 serial ports */
-#define OMAP3_UART1_BASE	OMAP2_UART1_BASE
-#define OMAP3_UART2_BASE	OMAP2_UART2_BASE
-#define OMAP3_UART3_BASE	0x49020000
-#define OMAP3_UART4_BASE	0x49042000	/* Only on 36xx */
-#define OMAP3_UART4_AM35XX_BASE	0x4809E000	/* Only on AM35xx */
-
-/* OMAP4 serial ports */
-#define OMAP4_UART1_BASE	OMAP2_UART1_BASE
-#define OMAP4_UART2_BASE	OMAP2_UART2_BASE
-#define OMAP4_UART3_BASE	0x48020000
-#define OMAP4_UART4_BASE	0x4806e000
-
-/* TI81XX serial ports */
-#define TI81XX_UART1_BASE	0x48020000
-#define TI81XX_UART2_BASE	0x48022000
-#define TI81XX_UART3_BASE	0x48024000
-
-/* AM3505/3517 UART4 */
-#define AM35XX_UART4_BASE	0x4809E000	/* Only on AM3505/3517 */
-
-/* AM33XX serial port */
-#define AM33XX_UART1_BASE	0x44E09000
-
-/* OMAP5 serial ports */
-#define OMAP5_UART1_BASE	OMAP2_UART1_BASE
-#define OMAP5_UART2_BASE	OMAP2_UART2_BASE
-#define OMAP5_UART3_BASE	OMAP4_UART3_BASE
-#define OMAP5_UART4_BASE	OMAP4_UART4_BASE
-#define OMAP5_UART5_BASE	0x48066000
-#define OMAP5_UART6_BASE	0x48068000
-
-/* External port on Zoom2/3 */
-#define ZOOM_UART_BASE		0x10000000
-#define ZOOM_UART_VIRT		0xfa400000
-
-#define OMAP_PORT_SHIFT		2
-#define OMAP7XX_PORT_SHIFT	0
-#define ZOOM_PORT_SHIFT		1
-
-#define OMAP1510_BASE_BAUD	(12000000/16)
-#define OMAP16XX_BASE_BAUD	(48000000/16)
-#define OMAP24XX_BASE_BAUD	(48000000/16)
-
-/*
- * DEBUG_LL port encoding stored into the UART1 scratchpad register by
- * decomp_setup in uncompress.h
- */
-#define OMAP1UART1		11
-#define OMAP1UART2		12
-#define OMAP1UART3		13
-#define OMAP2UART1		21
-#define OMAP2UART2		22
-#define OMAP2UART3		23
-#define OMAP3UART1		OMAP2UART1
-#define OMAP3UART2		OMAP2UART2
-#define OMAP3UART3		33
-#define OMAP3UART4		34		/* Only on 36xx */
-#define OMAP4UART1		OMAP2UART1
-#define OMAP4UART2		OMAP2UART2
-#define OMAP4UART3		43
-#define OMAP4UART4		44
-#define TI81XXUART1		81
-#define TI81XXUART2		82
-#define TI81XXUART3		83
-#define AM33XXUART1		84
-#define OMAP5UART3		OMAP4UART3
-#define OMAP5UART4		OMAP4UART4
-#define ZOOM_UART		95		/* Only on zoom2/3 */
-
-#ifndef __ASSEMBLER__
-
-struct omap_board_data;
-struct omap_uart_port_info;
-
-extern void omap_serial_init(void);
-extern void omap_serial_board_init(struct omap_uart_port_info *platform_data);
-extern void omap_serial_init_port(struct omap_board_data *bdata,
-		struct omap_uart_port_info *platform_data);
-#endif
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h
index 227ae2657554..ba4525059a99 100644
--- a/arch/arm/plat-omap/include/plat/sram.h
+++ b/arch/arm/plat-omap/include/plat/sram.h
@@ -1,18 +1,8 @@
-/*
- * arch/arm/plat-omap/include/mach/sram.h
- *
- * Interface for functions that need to be run in internal SRAM
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+int omap_sram_init(void);
 
-#ifndef __ARCH_ARM_OMAP_SRAM_H
-#define __ARCH_ARM_OMAP_SRAM_H
-
-#ifndef __ASSEMBLY__
-#include <asm/fncpy.h>
+void omap_map_sram(unsigned long start, unsigned long size,
+			unsigned long skip, int cached);
+void omap_sram_reset(void);
 
 extern void *omap_sram_push_address(unsigned long size);
 
@@ -24,82 +14,3 @@ extern void *omap_sram_push_address(unsigned long size);
 		_res = fncpy(_sram_address, &(funcp), size);	\
 	_res;							\
 })
-
-extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
-
-extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
-				u32 base_cs, u32 force_unlock);
-extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
-				      u32 mem_type);
-extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
-
-extern u32 omap3_configure_core_dpll(
-			u32 m2, u32 unlock_dll, u32 f, u32 inc,
-			u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
-			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
-			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
-			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
-extern void omap3_sram_restore_context(void);
-
-/* Do not use these */
-extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
-extern unsigned long omap1_sram_reprogram_clock_sz;
-
-extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
-extern unsigned long omap24xx_sram_reprogram_clock_sz;
-
-extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
-						u32 base_cs, u32 force_unlock);
-extern unsigned long omap242x_sram_ddr_init_sz;
-
-extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
-						int bypass);
-extern unsigned long omap242x_sram_set_prcm_sz;
-
-extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
-						u32 mem_type);
-extern unsigned long omap242x_sram_reprogram_sdrc_sz;
-
-
-extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
-						u32 base_cs, u32 force_unlock);
-extern unsigned long omap243x_sram_ddr_init_sz;
-
-extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
-						int bypass);
-extern unsigned long omap243x_sram_set_prcm_sz;
-
-extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
-						u32 mem_type);
-extern unsigned long omap243x_sram_reprogram_sdrc_sz;
-
-extern u32 omap3_sram_configure_core_dpll(
-			u32 m2, u32 unlock_dll, u32 f, u32 inc,
-			u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
-			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
-			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
-			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
-extern unsigned long omap3_sram_configure_core_dpll_sz;
-
-#ifdef CONFIG_PM
-extern void omap_push_sram_idle(void);
-#else
-static inline void omap_push_sram_idle(void) {}
-#endif /* CONFIG_PM */
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * OMAP2+: define the SRAM PA addresses.
- * Used by the SRAM management code and the idle sleep code.
- */
-#define OMAP2_SRAM_PA		0x40200000
-#define OMAP3_SRAM_PA           0x40200000
-#ifdef CONFIG_OMAP4_ERRATA_I688
-#define OMAP4_SRAM_PA		0x40304000
-#define OMAP4_SRAM_VA		0xfe404000
-#else
-#define OMAP4_SRAM_PA		0x40300000
-#endif
-#define AM33XX_SRAM_PA		0x40300000
-#endif
diff --git a/arch/arm/plat-omap/include/plat/tc.h b/arch/arm/plat-omap/include/plat/tc.h
deleted file mode 100644
index 1b4b2da86203..000000000000
--- a/arch/arm/plat-omap/include/plat/tc.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/tc.h
- *
- * OMAP Traffic Controller
- *
- * Copyright (C) 2004 Nokia Corporation
- * Author: Imre Deak <imre.deak@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-
-#ifndef __ASM_ARCH_TC_H
-#define __ASM_ARCH_TC_H
-
-#define TCMIF_BASE		0xfffecc00
-#define OMAP_TC_OCPT1_PRIOR	(TCMIF_BASE + 0x00)
-#define OMAP_TC_EMIFS_PRIOR	(TCMIF_BASE + 0x04)
-#define OMAP_TC_EMIFF_PRIOR	(TCMIF_BASE + 0x08)
-#define EMIFS_CONFIG		(TCMIF_BASE + 0x0c)
-#define EMIFS_CS0_CONFIG	(TCMIF_BASE + 0x10)
-#define EMIFS_CS1_CONFIG	(TCMIF_BASE + 0x14)
-#define EMIFS_CS2_CONFIG	(TCMIF_BASE + 0x18)
-#define EMIFS_CS3_CONFIG	(TCMIF_BASE + 0x1c)
-#define EMIFF_SDRAM_CONFIG	(TCMIF_BASE + 0x20)
-#define EMIFF_MRS		(TCMIF_BASE + 0x24)
-#define TC_TIMEOUT1		(TCMIF_BASE + 0x28)
-#define TC_TIMEOUT2		(TCMIF_BASE + 0x2c)
-#define TC_TIMEOUT3		(TCMIF_BASE + 0x30)
-#define TC_ENDIANISM		(TCMIF_BASE + 0x34)
-#define EMIFF_SDRAM_CONFIG_2	(TCMIF_BASE + 0x3c)
-#define EMIF_CFG_DYNAMIC_WS	(TCMIF_BASE + 0x40)
-#define EMIFS_ACS0		(TCMIF_BASE + 0x50)
-#define EMIFS_ACS1		(TCMIF_BASE + 0x54)
-#define EMIFS_ACS2		(TCMIF_BASE + 0x58)
-#define EMIFS_ACS3		(TCMIF_BASE + 0x5c)
-#define OMAP_TC_OCPT2_PRIOR	(TCMIF_BASE + 0xd0)
-
-/* external EMIFS chipselect regions */
-#define	OMAP_CS0_PHYS		0x00000000
-#define	OMAP_CS0_SIZE		SZ_64M
-
-#define	OMAP_CS1_PHYS		0x04000000
-#define	OMAP_CS1_SIZE		SZ_64M
-
-#define	OMAP_CS1A_PHYS		OMAP_CS1_PHYS
-#define	OMAP_CS1A_SIZE		SZ_32M
-
-#define	OMAP_CS1B_PHYS		(OMAP_CS1A_PHYS + OMAP_CS1A_SIZE)
-#define	OMAP_CS1B_SIZE		SZ_32M
-
-#define	OMAP_CS2_PHYS		0x08000000
-#define	OMAP_CS2_SIZE		SZ_64M
-
-#define	OMAP_CS2A_PHYS		OMAP_CS2_PHYS
-#define	OMAP_CS2A_SIZE		SZ_32M
-
-#define	OMAP_CS2B_PHYS		(OMAP_CS2A_PHYS + OMAP_CS2A_SIZE)
-#define	OMAP_CS2B_SIZE		SZ_32M
-
-#define	OMAP_CS3_PHYS		0x0c000000
-#define	OMAP_CS3_SIZE		SZ_64M
-
-#ifndef	__ASSEMBLER__
-
-/* EMIF Slow Interface Configuration Register */
-#define OMAP_EMIFS_CONFIG_FR		(1 << 4)
-#define OMAP_EMIFS_CONFIG_PDE		(1 << 3)
-#define OMAP_EMIFS_CONFIG_PWD_EN	(1 << 2)
-#define OMAP_EMIFS_CONFIG_BM		(1 << 1)
-#define OMAP_EMIFS_CONFIG_WP		(1 << 0)
-
-#define EMIFS_CCS(n)		(EMIFS_CS0_CONFIG + (4 * (n)))
-#define EMIFS_ACS(n)		(EMIFS_ACS0 + (4 * (n)))
-
-#endif	/* __ASSEMBLER__ */
-
-#endif	/* __ASM_ARCH_TC_H */
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
deleted file mode 100644
index 7f7b112acccb..000000000000
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/uncompress.h
- *
- * Serial port stubs for kernel decompress status messages
- *
- * Initially based on:
- * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Rewritten by:
- * Author: <source@mvista.com>
- * 2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/types.h>
-#include <linux/serial_reg.h>
-
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-
-#include <plat/serial.h>
-
-#define MDR1_MODE_MASK			0x07
-
-volatile u8 *uart_base;
-int uart_shift;
-
-/*
- * Store the DEBUG_LL uart number into memory.
- * See also debug-macro.S, and serial.c for related code.
- */
-static void set_omap_uart_info(unsigned char port)
-{
-	/*
-	 * Get address of some.bss variable and round it down
-	 * a la CONFIG_AUTO_ZRELADDR.
-	 */
-	u32 ram_start = (u32)&uart_shift & 0xf8000000;
-	u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS);
-	*uart_info = port;
-}
-
-static void putc(int c)
-{
-	if (!uart_base)
-		return;
-
-	/* Check for UART 16x mode */
-	if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0)
-		return;
-
-	while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE))
-		barrier();
-	uart_base[UART_TX << uart_shift] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * Macros to configure UART1 and debug UART
- */
-#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id)		\
-	if (machine_is_##mach()) {					\
-		uart_base = (volatile u8 *)(dbg_uart);			\
-		uart_shift = (dbg_shft);				\
-		port = (dbg_id);					\
-		set_omap_uart_info(port);				\
-		break;							\
-	}
-
-#define DEBUG_LL_OMAP7XX(p, mach)					\
-	_DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT,	\
-		OMAP1UART##p)
-
-#define DEBUG_LL_OMAP1(p, mach)						\
-	_DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT,	\
-		OMAP1UART##p)
-
-#define DEBUG_LL_OMAP2(p, mach)						\
-	_DEBUG_LL_ENTRY(mach, OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT,	\
-		OMAP2UART##p)
-
-#define DEBUG_LL_OMAP3(p, mach)						\
-	_DEBUG_LL_ENTRY(mach, OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT,	\
-		OMAP3UART##p)
-
-#define DEBUG_LL_OMAP4(p, mach)						\
-	_DEBUG_LL_ENTRY(mach, OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT,	\
-		OMAP4UART##p)
-
-#define DEBUG_LL_OMAP5(p, mach)						\
-	_DEBUG_LL_ENTRY(mach, OMAP5_UART##p##_BASE, OMAP_PORT_SHIFT,	\
-		OMAP5UART##p)
-/* Zoom2/3 shift is different for UART1 and external port */
-#define DEBUG_LL_ZOOM(mach)						\
-	_DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART)
-
-#define DEBUG_LL_TI81XX(p, mach)					\
-	_DEBUG_LL_ENTRY(mach, TI81XX_UART##p##_BASE, OMAP_PORT_SHIFT,	\
-		TI81XXUART##p)
-
-#define DEBUG_LL_AM33XX(p, mach)					\
-	_DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT,	\
-		AM33XXUART##p)
-
-static inline void arch_decomp_setup(void)
-{
-	int port = 0;
-
-	/*
-	 * Initialize the port based on the machine ID from the bootloader.
-	 * Note that we're using macros here instead of switch statement
-	 * as machine_is functions are optimized out for the boards that
-	 * are not selected.
-	 */
-	do {
-		/* omap7xx/8xx based boards using UART1 with shift 0 */
-		DEBUG_LL_OMAP7XX(1, herald);
-		DEBUG_LL_OMAP7XX(1, omap_perseus2);
-
-		/* omap15xx/16xx based boards using UART1 */
-		DEBUG_LL_OMAP1(1, ams_delta);
-		DEBUG_LL_OMAP1(1, nokia770);
-		DEBUG_LL_OMAP1(1, omap_h2);
-		DEBUG_LL_OMAP1(1, omap_h3);
-		DEBUG_LL_OMAP1(1, omap_innovator);
-		DEBUG_LL_OMAP1(1, omap_osk);
-		DEBUG_LL_OMAP1(1, omap_palmte);
-		DEBUG_LL_OMAP1(1, omap_palmz71);
-
-		/* omap15xx/16xx based boards using UART2 */
-		DEBUG_LL_OMAP1(2, omap_palmtt);
-
-		/* omap15xx/16xx based boards using UART3 */
-		DEBUG_LL_OMAP1(3, sx1);
-
-		/* omap2 based boards using UART1 */
-		DEBUG_LL_OMAP2(1, omap_2430sdp);
-		DEBUG_LL_OMAP2(1, omap_apollon);
-		DEBUG_LL_OMAP2(1, omap_h4);
-
-		/* omap2 based boards using UART3 */
-		DEBUG_LL_OMAP2(3, nokia_n800);
-		DEBUG_LL_OMAP2(3, nokia_n810);
-		DEBUG_LL_OMAP2(3, nokia_n810_wimax);
-
-		/* omap3 based boards using UART1 */
-		DEBUG_LL_OMAP2(1, omap3evm);
-		DEBUG_LL_OMAP3(1, omap_3430sdp);
-		DEBUG_LL_OMAP3(1, omap_3630sdp);
-		DEBUG_LL_OMAP3(1, omap3530_lv_som);
-		DEBUG_LL_OMAP3(1, omap3_torpedo);
-
-		/* omap3 based boards using UART3 */
-		DEBUG_LL_OMAP3(3, cm_t35);
-		DEBUG_LL_OMAP3(3, cm_t3517);
-		DEBUG_LL_OMAP3(3, cm_t3730);
-		DEBUG_LL_OMAP3(3, craneboard);
-		DEBUG_LL_OMAP3(3, devkit8000);
-		DEBUG_LL_OMAP3(3, igep0020);
-		DEBUG_LL_OMAP3(3, igep0030);
-		DEBUG_LL_OMAP3(3, nokia_rm680);
-		DEBUG_LL_OMAP3(3, nokia_rm696);
-		DEBUG_LL_OMAP3(3, nokia_rx51);
-		DEBUG_LL_OMAP3(3, omap3517evm);
-		DEBUG_LL_OMAP3(3, omap3_beagle);
-		DEBUG_LL_OMAP3(3, omap3_pandora);
-		DEBUG_LL_OMAP3(3, omap_ldp);
-		DEBUG_LL_OMAP3(3, overo);
-		DEBUG_LL_OMAP3(3, touchbook);
-
-		/* omap4 based boards using UART3 */
-		DEBUG_LL_OMAP4(3, omap_4430sdp);
-		DEBUG_LL_OMAP4(3, omap4_panda);
-
-		/* omap5 based boards using UART3 */
-		DEBUG_LL_OMAP5(3, omap5_sevm);
-
-		/* zoom2/3 external uart */
-		DEBUG_LL_ZOOM(omap_zoom2);
-		DEBUG_LL_ZOOM(omap_zoom3);
-
-		/* TI8168 base boards using UART3 */
-		DEBUG_LL_TI81XX(3, ti8168evm);
-
-		/* TI8148 base boards using UART1 */
-		DEBUG_LL_TI81XX(1, ti8148evm);
-
-		/* AM33XX base boards using UART1 */
-		DEBUG_LL_AM33XX(1, am335xevm);
-	} while (0);
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_wdog()
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
deleted file mode 100644
index 87ee140fefaa..000000000000
--- a/arch/arm/plat-omap/include/plat/usb.h
+++ /dev/null
@@ -1,179 +0,0 @@
-// include/asm-arm/mach-omap/usb.h
-
-#ifndef	__ASM_ARCH_OMAP_USB_H
-#define	__ASM_ARCH_OMAP_USB_H
-
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/usb/musb.h>
-
-#define OMAP3_HS_USB_PORTS	3
-
-enum usbhs_omap_port_mode {
-	OMAP_USBHS_PORT_MODE_UNUSED,
-	OMAP_EHCI_PORT_MODE_PHY,
-	OMAP_EHCI_PORT_MODE_TLL,
-	OMAP_EHCI_PORT_MODE_HSIC,
-	OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0,
-	OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM,
-	OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0,
-	OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM,
-	OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0,
-	OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM,
-	OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0,
-	OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM,
-	OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0,
-	OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM
-};
-
-struct usbhs_omap_board_data {
-	enum usbhs_omap_port_mode	port_mode[OMAP3_HS_USB_PORTS];
-
-	/* have to be valid if phy_reset is true and portx is in phy mode */
-	int	reset_gpio_port[OMAP3_HS_USB_PORTS];
-
-	/* Set this to true for ES2.x silicon */
-	unsigned			es2_compatibility:1;
-
-	unsigned			phy_reset:1;
-
-	/*
-	 * Regulators for USB PHYs.
-	 * Each PHY can have a separate regulator.
-	 */
-	struct regulator		*regulator[OMAP3_HS_USB_PORTS];
-};
-
-#ifdef CONFIG_ARCH_OMAP2PLUS
-
-struct ehci_hcd_omap_platform_data {
-	enum usbhs_omap_port_mode	port_mode[OMAP3_HS_USB_PORTS];
-	int				reset_gpio_port[OMAP3_HS_USB_PORTS];
-	struct regulator		*regulator[OMAP3_HS_USB_PORTS];
-	unsigned			phy_reset:1;
-};
-
-struct ohci_hcd_omap_platform_data {
-	enum usbhs_omap_port_mode	port_mode[OMAP3_HS_USB_PORTS];
-	unsigned			es2_compatibility:1;
-};
-
-struct usbhs_omap_platform_data {
-	enum usbhs_omap_port_mode		port_mode[OMAP3_HS_USB_PORTS];
-
-	struct ehci_hcd_omap_platform_data	*ehci_data;
-	struct ohci_hcd_omap_platform_data	*ohci_data;
-};
-
-struct usbtll_omap_platform_data {
-	enum usbhs_omap_port_mode		port_mode[OMAP3_HS_USB_PORTS];
-};
-/*-------------------------------------------------------------------------*/
-
-struct omap_musb_board_data {
-	u8	interface_type;
-	u8	mode;
-	u16	power;
-	unsigned extvbus:1;
-	void	(*set_phy_power)(u8 on);
-	void	(*clear_irq)(void);
-	void	(*set_mode)(u8 mode);
-	void	(*reset)(void);
-};
-
-enum musb_interface    {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
-
-extern void usb_musb_init(struct omap_musb_board_data *board_data);
-
-extern void usbhs_init(const struct usbhs_omap_board_data *pdata);
-extern int omap_tll_enable(void);
-extern int omap_tll_disable(void);
-
-extern int omap4430_phy_power(struct device *dev, int ID, int on);
-extern int omap4430_phy_set_clk(struct device *dev, int on);
-extern int omap4430_phy_init(struct device *dev);
-extern int omap4430_phy_exit(struct device *dev);
-extern int omap4430_phy_suspend(struct device *dev, int suspend);
-
-#endif
-
-extern void am35x_musb_reset(void);
-extern void am35x_musb_phy_power(u8 on);
-extern void am35x_musb_clear_irq(void);
-extern void am35x_set_mode(u8 musb_mode);
-extern void ti81xx_musb_phy_power(u8 on);
-
-/* AM35x */
-/* USB 2.0 PHY Control */
-#define CONF2_PHY_GPIOMODE	(1 << 23)
-#define CONF2_OTGMODE		(3 << 14)
-#define CONF2_NO_OVERRIDE	(0 << 14)
-#define CONF2_FORCE_HOST	(1 << 14)
-#define CONF2_FORCE_DEVICE	(2 << 14)
-#define CONF2_FORCE_HOST_VBUS_LOW (3 << 14)
-#define CONF2_SESENDEN		(1 << 13)
-#define CONF2_VBDTCTEN		(1 << 12)
-#define CONF2_REFFREQ_24MHZ	(2 << 8)
-#define CONF2_REFFREQ_26MHZ	(7 << 8)
-#define CONF2_REFFREQ_13MHZ	(6 << 8)
-#define CONF2_REFFREQ		(0xf << 8)
-#define CONF2_PHYCLKGD		(1 << 7)
-#define CONF2_VBUSSENSE		(1 << 6)
-#define CONF2_PHY_PLLON		(1 << 5)
-#define CONF2_RESET		(1 << 4)
-#define CONF2_PHYPWRDN		(1 << 3)
-#define CONF2_OTGPWRDN		(1 << 2)
-#define CONF2_DATPOL		(1 << 1)
-
-/* TI81XX specific definitions */
-#define USBCTRL0	0x620
-#define USBSTAT0	0x624
-
-/* TI816X PHY controls bits */
-#define TI816X_USBPHY0_NORMAL_MODE	(1 << 0)
-#define TI816X_USBPHY_REFCLK_OSC	(1 << 8)
-
-/* TI814X PHY controls bits */
-#define USBPHY_CM_PWRDN		(1 << 0)
-#define USBPHY_OTG_PWRDN	(1 << 1)
-#define USBPHY_CHGDET_DIS	(1 << 2)
-#define USBPHY_CHGDET_RSTRT	(1 << 3)
-#define USBPHY_SRCONDM		(1 << 4)
-#define USBPHY_SINKONDP		(1 << 5)
-#define USBPHY_CHGISINK_EN	(1 << 6)
-#define USBPHY_CHGVSRC_EN	(1 << 7)
-#define USBPHY_DMPULLUP		(1 << 8)
-#define USBPHY_DPPULLUP		(1 << 9)
-#define USBPHY_CDET_EXTCTL	(1 << 10)
-#define USBPHY_GPIO_MODE	(1 << 12)
-#define USBPHY_DPOPBUFCTL	(1 << 13)
-#define USBPHY_DMOPBUFCTL	(1 << 14)
-#define USBPHY_DPINPUT		(1 << 15)
-#define USBPHY_DMINPUT		(1 << 16)
-#define USBPHY_DPGPIO_PD	(1 << 17)
-#define USBPHY_DMGPIO_PD	(1 << 18)
-#define USBPHY_OTGVDET_EN	(1 << 19)
-#define USBPHY_OTGSESSEND_EN	(1 << 20)
-#define USBPHY_DATA_POLARITY	(1 << 23)
-
-#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_USB)
-u32 omap1_usb0_init(unsigned nwires, unsigned is_device);
-u32 omap1_usb1_init(unsigned nwires);
-u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup);
-#else
-static inline u32 omap1_usb0_init(unsigned nwires, unsigned is_device)
-{
-	return 0;
-}
-static inline u32 omap1_usb1_init(unsigned nwires)
-{
-	return 0;
-
-}
-static inline u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup)
-{
-	return 0;
-}
-#endif
-
-#endif	/* __ASM_ARCH_OMAP_USB_H */
diff --git a/arch/arm/plat-omap/include/plat/vrfb.h b/arch/arm/plat-omap/include/plat/vrfb.h
deleted file mode 100644
index 3792bdea2f6d..000000000000
--- a/arch/arm/plat-omap/include/plat/vrfb.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * VRFB Rotation Engine
- *
- * Copyright (C) 2009 Nokia Corporation
- * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-
-#ifndef __OMAP_VRFB_H__
-#define __OMAP_VRFB_H__
-
-#define OMAP_VRFB_LINE_LEN 2048
-
-struct vrfb {
-	u8 context;
-	void __iomem *vaddr[4];
-	unsigned long paddr[4];
-	u16 xres;
-	u16 yres;
-	u16 xoffset;
-	u16 yoffset;
-	u8 bytespp;
-	bool yuv_mode;
-};
-
-#ifdef CONFIG_OMAP2_VRFB
-extern int omap_vrfb_request_ctx(struct vrfb *vrfb);
-extern void omap_vrfb_release_ctx(struct vrfb *vrfb);
-extern void omap_vrfb_adjust_size(u16 *width, u16 *height,
-		u8 bytespp);
-extern u32 omap_vrfb_min_phys_size(u16 width, u16 height, u8 bytespp);
-extern u16 omap_vrfb_max_height(u32 phys_size, u16 width, u8 bytespp);
-extern void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr,
-		u16 width, u16 height,
-		unsigned bytespp, bool yuv_mode);
-extern int omap_vrfb_map_angle(struct vrfb *vrfb, u16 height, u8 rot);
-extern void omap_vrfb_restore_context(void);
-
-#else
-static inline int omap_vrfb_request_ctx(struct vrfb *vrfb) { return 0; }
-static inline void omap_vrfb_release_ctx(struct vrfb *vrfb) {}
-static inline void omap_vrfb_adjust_size(u16 *width, u16 *height,
-		u8 bytespp) {}
-static inline u32 omap_vrfb_min_phys_size(u16 width, u16 height, u8 bytespp)
-		{ return 0; }
-static inline u16 omap_vrfb_max_height(u32 phys_size, u16 width, u8 bytespp)
-		{ return 0; }
-static inline void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr,
-		u16 width, u16 height, unsigned bytespp, bool yuv_mode) {}
-static inline int omap_vrfb_map_angle(struct vrfb *vrfb, u16 height, u8 rot)
-		{ return 0; }
-static inline void omap_vrfb_restore_context(void) {}
-#endif
-#endif /* __VRFB_H */
diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c
deleted file mode 100644
index 9722f418ae1f..000000000000
--- a/arch/arm/plat-omap/omap-pm-noop.c
+++ /dev/null
@@ -1,372 +0,0 @@
-/*
- * omap-pm-noop.c - OMAP power management interface - dummy version
- *
- * This code implements the OMAP power management interface to
- * drivers, CPUIdle, CPUFreq, and DSP Bridge.  It is strictly for
- * debug/demonstration use, as it does nothing but printk() whenever a
- * function is called (when DEBUG is defined, below)
- *
- * Copyright (C) 2008-2009 Texas Instruments, Inc.
- * Copyright (C) 2008-2009 Nokia Corporation
- * Paul Walmsley
- *
- * Interface developed by (in alphabetical order):
- * Karthik Dasu, Tony Lindgren, Rajendra Nayak, Sakari Poussa, Veeramanikandan
- * Raju, Anand Sawant, Igor Stoppa, Paul Walmsley, Richard Woodruff
- */
-
-#undef DEBUG
-
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-
-/* Interface documentation is in mach/omap-pm.h */
-#include <plat/omap-pm.h>
-#include <plat/omap_device.h>
-
-static bool off_mode_enabled;
-static int dummy_context_loss_counter;
-
-/*
- * Device-driver-originated constraints (via board-*.c files)
- */
-
-int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t)
-{
-	if (!dev || t < -1) {
-		WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
-		return -EINVAL;
-	}
-
-	if (t == -1)
-		pr_debug("OMAP PM: remove max MPU wakeup latency constraint: dev %s\n",
-			 dev_name(dev));
-	else
-		pr_debug("OMAP PM: add max MPU wakeup latency constraint: dev %s, t = %ld usec\n",
-			 dev_name(dev), t);
-
-	/*
-	 * For current Linux, this needs to map the MPU to a
-	 * powerdomain, then go through the list of current max lat
-	 * constraints on the MPU and find the smallest.  If
-	 * the latency constraint has changed, the code should
-	 * recompute the state to enter for the next powerdomain
-	 * state.
-	 *
-	 * TI CDP code can call constraint_set here.
-	 */
-
-	return 0;
-}
-
-int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r)
-{
-	if (!dev || (agent_id != OCP_INITIATOR_AGENT &&
-	    agent_id != OCP_TARGET_AGENT)) {
-		WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
-		return -EINVAL;
-	}
-
-	if (r == 0)
-		pr_debug("OMAP PM: remove min bus tput constraint: dev %s for agent_id %d\n",
-			 dev_name(dev), agent_id);
-	else
-		pr_debug("OMAP PM: add min bus tput constraint: dev %s for agent_id %d: rate %ld KiB\n",
-			 dev_name(dev), agent_id, r);
-
-	/*
-	 * This code should model the interconnect and compute the
-	 * required clock frequency, convert that to a VDD2 OPP ID, then
-	 * set the VDD2 OPP appropriately.
-	 *
-	 * TI CDP code can call constraint_set here on the VDD2 OPP.
-	 */
-
-	return 0;
-}
-
-int omap_pm_set_max_dev_wakeup_lat(struct device *req_dev, struct device *dev,
-				   long t)
-{
-	if (!req_dev || !dev || t < -1) {
-		WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
-		return -EINVAL;
-	}
-
-	if (t == -1)
-		pr_debug("OMAP PM: remove max device latency constraint: dev %s\n",
-			 dev_name(dev));
-	else
-		pr_debug("OMAP PM: add max device latency constraint: dev %s, t = %ld usec\n",
-			 dev_name(dev), t);
-
-	/*
-	 * For current Linux, this needs to map the device to a
-	 * powerdomain, then go through the list of current max lat
-	 * constraints on that powerdomain and find the smallest.  If
-	 * the latency constraint has changed, the code should
-	 * recompute the state to enter for the next powerdomain
-	 * state.  Conceivably, this code should also determine
-	 * whether to actually disable the device clocks or not,
-	 * depending on how long it takes to re-enable the clocks.
-	 *
-	 * TI CDP code can call constraint_set here.
-	 */
-
-	return 0;
-}
-
-int omap_pm_set_max_sdma_lat(struct device *dev, long t)
-{
-	if (!dev || t < -1) {
-		WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
-		return -EINVAL;
-	}
-
-	if (t == -1)
-		pr_debug("OMAP PM: remove max DMA latency constraint: dev %s\n",
-			 dev_name(dev));
-	else
-		pr_debug("OMAP PM: add max DMA latency constraint: dev %s, t = %ld usec\n",
-			 dev_name(dev), t);
-
-	/*
-	 * For current Linux PM QOS params, this code should scan the
-	 * list of maximum CPU and DMA latencies and select the
-	 * smallest, then set cpu_dma_latency pm_qos_param
-	 * accordingly.
-	 *
-	 * For future Linux PM QOS params, with separate CPU and DMA
-	 * latency params, this code should just set the dma_latency param.
-	 *
-	 * TI CDP code can call constraint_set here.
-	 */
-
-	return 0;
-}
-
-int omap_pm_set_min_clk_rate(struct device *dev, struct clk *c, long r)
-{
-	if (!dev || !c || r < 0) {
-		WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
-		return -EINVAL;
-	}
-
-	if (r == 0)
-		pr_debug("OMAP PM: remove min clk rate constraint: dev %s\n",
-			 dev_name(dev));
-	else
-		pr_debug("OMAP PM: add min clk rate constraint: dev %s, rate = %ld Hz\n",
-			 dev_name(dev), r);
-
-	/*
-	 * Code in a real implementation should keep track of these
-	 * constraints on the clock, and determine the highest minimum
-	 * clock rate.  It should iterate over each OPP and determine
-	 * whether the OPP will result in a clock rate that would
-	 * satisfy this constraint (and any other PM constraint in effect
-	 * at that time).  Once it finds the lowest-voltage OPP that
-	 * meets those conditions, it should switch to it, or return
-	 * an error if the code is not capable of doing so.
-	 */
-
-	return 0;
-}
-
-/*
- * DSP Bridge-specific constraints
- */
-
-const struct omap_opp *omap_pm_dsp_get_opp_table(void)
-{
-	pr_debug("OMAP PM: DSP request for OPP table\n");
-
-	/*
-	 * Return DSP frequency table here:  The final item in the
-	 * array should have .rate = .opp_id = 0.
-	 */
-
-	return NULL;
-}
-
-void omap_pm_dsp_set_min_opp(u8 opp_id)
-{
-	if (opp_id == 0) {
-		WARN_ON(1);
-		return;
-	}
-
-	pr_debug("OMAP PM: DSP requests minimum VDD1 OPP to be %d\n", opp_id);
-
-	/*
-	 *
-	 * For l-o dev tree, our VDD1 clk is keyed on OPP ID, so we
-	 * can just test to see which is higher, the CPU's desired OPP
-	 * ID or the DSP's desired OPP ID, and use whichever is
-	 * highest.
-	 *
-	 * In CDP12.14+, the VDD1 OPP custom clock that controls the DSP
-	 * rate is keyed on MPU speed, not the OPP ID.  So we need to
-	 * map the OPP ID to the MPU speed for use with clk_set_rate()
-	 * if it is higher than the current OPP clock rate.
-	 *
-	 */
-}
-
-
-u8 omap_pm_dsp_get_opp(void)
-{
-	pr_debug("OMAP PM: DSP requests current DSP OPP ID\n");
-
-	/*
-	 * For l-o dev tree, call clk_get_rate() on VDD1 OPP clock
-	 *
-	 * CDP12.14+:
-	 * Call clk_get_rate() on the OPP custom clock, map that to an
-	 * OPP ID using the tables defined in board-*.c/chip-*.c files.
-	 */
-
-	return 0;
-}
-
-/*
- * CPUFreq-originated constraint
- *
- * In the future, this should be handled by custom OPP clocktype
- * functions.
- */
-
-struct cpufreq_frequency_table **omap_pm_cpu_get_freq_table(void)
-{
-	pr_debug("OMAP PM: CPUFreq request for frequency table\n");
-
-	/*
-	 * Return CPUFreq frequency table here: loop over
-	 * all VDD1 clkrates, pull out the mpu_ck frequencies, build
-	 * table
-	 */
-
-	return NULL;
-}
-
-void omap_pm_cpu_set_freq(unsigned long f)
-{
-	if (f == 0) {
-		WARN_ON(1);
-		return;
-	}
-
-	pr_debug("OMAP PM: CPUFreq requests CPU frequency to be set to %lu\n",
-		 f);
-
-	/*
-	 * For l-o dev tree, determine whether MPU freq or DSP OPP id
-	 * freq is higher.  Find the OPP ID corresponding to the
-	 * higher frequency.  Call clk_round_rate() and clk_set_rate()
-	 * on the OPP custom clock.
-	 *
-	 * CDP should just be able to set the VDD1 OPP clock rate here.
-	 */
-}
-
-unsigned long omap_pm_cpu_get_freq(void)
-{
-	pr_debug("OMAP PM: CPUFreq requests current CPU frequency\n");
-
-	/*
-	 * Call clk_get_rate() on the mpu_ck.
-	 */
-
-	return 0;
-}
-
-/**
- * omap_pm_enable_off_mode - notify OMAP PM that off-mode is enabled
- *
- * Intended for use only by OMAP PM core code to notify this layer
- * that off mode has been enabled.
- */
-void omap_pm_enable_off_mode(void)
-{
-	off_mode_enabled = true;
-}
-
-/**
- * omap_pm_disable_off_mode - notify OMAP PM that off-mode is disabled
- *
- * Intended for use only by OMAP PM core code to notify this layer
- * that off mode has been disabled.
- */
-void omap_pm_disable_off_mode(void)
-{
-	off_mode_enabled = false;
-}
-
-/*
- * Device context loss tracking
- */
-
-#ifdef CONFIG_ARCH_OMAP2PLUS
-
-int omap_pm_get_dev_context_loss_count(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	int count;
-
-	if (WARN_ON(!dev))
-		return -ENODEV;
-
-	if (dev->pm_domain == &omap_device_pm_domain) {
-		count = omap_device_get_context_loss_count(pdev);
-	} else {
-		WARN_ONCE(off_mode_enabled, "omap_pm: using dummy context loss counter; device %s should be converted to omap_device",
-			  dev_name(dev));
-
-		count = dummy_context_loss_counter;
-
-		if (off_mode_enabled) {
-			count++;
-			/*
-			 * Context loss count has to be a non-negative value.
-			 * Clear the sign bit to get a value range from 0 to
-			 * INT_MAX.
-			 */
-			count &= INT_MAX;
-			dummy_context_loss_counter = count;
-		}
-	}
-
-	pr_debug("OMAP PM: context loss count for dev %s = %d\n",
-		 dev_name(dev), count);
-
-	return count;
-}
-
-#else
-
-int omap_pm_get_dev_context_loss_count(struct device *dev)
-{
-	return dummy_context_loss_counter;
-}
-
-#endif
-
-/* Should be called before clk framework init */
-int __init omap_pm_if_early_init(void)
-{
-	return 0;
-}
-
-/* Must be called after clock framework is initialized */
-int __init omap_pm_if_init(void)
-{
-	return 0;
-}
-
-void omap_pm_if_exit(void)
-{
-	/* Deallocate CPUFreq frequency table here */
-}
-
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
deleted file mode 100644
index 7a7d1f2a65e9..000000000000
--- a/arch/arm/plat-omap/omap_device.c
+++ /dev/null
@@ -1,1278 +0,0 @@
-/*
- * omap_device implementation
- *
- * Copyright (C) 2009-2010 Nokia Corporation
- * Paul Walmsley, Kevin Hilman
- *
- * Developed in collaboration with (alphabetical order): Benoit
- * Cousson, Thara Gopinath, Tony Lindgren, Rajendra Nayak, Vikram
- * Pandita, Sakari Poussa, Anand Sawant, Santosh Shilimkar, Richard
- * Woodruff
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This code provides a consistent interface for OMAP device drivers
- * to control power management and interconnect properties of their
- * devices.
- *
- * In the medium- to long-term, this code should either be
- * a) implemented via arch-specific pointers in platform_data
- * or
- * b) implemented as a proper omap_bus/omap_device in Linux, no more
- *    platform_data func pointers
- *
- *
- * Guidelines for usage by driver authors:
- *
- * 1. These functions are intended to be used by device drivers via
- * function pointers in struct platform_data.  As an example,
- * omap_device_enable() should be passed to the driver as
- *
- * struct foo_driver_platform_data {
- * ...
- *      int (*device_enable)(struct platform_device *pdev);
- * ...
- * }
- *
- * Note that the generic "device_enable" name is used, rather than
- * "omap_device_enable".  This is so other architectures can pass in their
- * own enable/disable functions here.
- *
- * This should be populated during device setup:
- *
- * ...
- * pdata->device_enable = omap_device_enable;
- * ...
- *
- * 2. Drivers should first check to ensure the function pointer is not null
- * before calling it, as in:
- *
- * if (pdata->device_enable)
- *     pdata->device_enable(pdev);
- *
- * This allows other architectures that don't use similar device_enable()/
- * device_shutdown() functions to execute normally.
- *
- * ...
- *
- * Suggested usage by device drivers:
- *
- * During device initialization:
- * device_enable()
- *
- * During device idle:
- * (save remaining device context if necessary)
- * device_idle();
- *
- * During device resume:
- * device_enable();
- * (restore context if necessary)
- *
- * During device shutdown:
- * device_shutdown()
- * (device must be reinitialized at this point to use it again)
- *
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-#include <linux/pm_runtime.h>
-#include <linux/of.h>
-#include <linux/notifier.h>
-
-#include <plat/omap_device.h>
-#include <plat/omap_hwmod.h>
-#include <plat/clock.h>
-
-/* These parameters are passed to _omap_device_{de,}activate() */
-#define USE_WAKEUP_LAT			0
-#define IGNORE_WAKEUP_LAT		1
-
-static int omap_early_device_register(struct platform_device *pdev);
-
-static struct omap_device_pm_latency omap_default_latency[] = {
-	{
-		.deactivate_func = omap_device_idle_hwmods,
-		.activate_func   = omap_device_enable_hwmods,
-		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	}
-};
-
-/* Private functions */
-
-/**
- * _omap_device_activate - increase device readiness
- * @od: struct omap_device *
- * @ignore_lat: increase to latency target (0) or full readiness (1)?
- *
- * Increase readiness of omap_device @od (thus decreasing device
- * wakeup latency, but consuming more power).  If @ignore_lat is
- * IGNORE_WAKEUP_LAT, make the omap_device fully active.  Otherwise,
- * if @ignore_lat is USE_WAKEUP_LAT, and the device's maximum wakeup
- * latency is greater than the requested maximum wakeup latency, step
- * backwards in the omap_device_pm_latency table to ensure the
- * device's maximum wakeup latency is less than or equal to the
- * requested maximum wakeup latency.  Returns 0.
- */
-static int _omap_device_activate(struct omap_device *od, u8 ignore_lat)
-{
-	struct timespec a, b, c;
-
-	dev_dbg(&od->pdev->dev, "omap_device: activating\n");
-
-	while (od->pm_lat_level > 0) {
-		struct omap_device_pm_latency *odpl;
-		unsigned long long act_lat = 0;
-
-		od->pm_lat_level--;
-
-		odpl = od->pm_lats + od->pm_lat_level;
-
-		if (!ignore_lat &&
-		    (od->dev_wakeup_lat <= od->_dev_wakeup_lat_limit))
-			break;
-
-		read_persistent_clock(&a);
-
-		/* XXX check return code */
-		odpl->activate_func(od);
-
-		read_persistent_clock(&b);
-
-		c = timespec_sub(b, a);
-		act_lat = timespec_to_ns(&c);
-
-		dev_dbg(&od->pdev->dev,
-			"omap_device: pm_lat %d: activate: elapsed time %llu nsec\n",
-			od->pm_lat_level, act_lat);
-
-		if (act_lat > odpl->activate_lat) {
-			odpl->activate_lat_worst = act_lat;
-			if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) {
-				odpl->activate_lat = act_lat;
-				dev_dbg(&od->pdev->dev,
-					"new worst case activate latency %d: %llu\n",
-					od->pm_lat_level, act_lat);
-			} else
-				dev_warn(&od->pdev->dev,
-					 "activate latency %d higher than expected. (%llu > %d)\n",
-					 od->pm_lat_level, act_lat,
-					 odpl->activate_lat);
-		}
-
-		od->dev_wakeup_lat -= odpl->activate_lat;
-	}
-
-	return 0;
-}
-
-/**
- * _omap_device_deactivate - decrease device readiness
- * @od: struct omap_device *
- * @ignore_lat: decrease to latency target (0) or full inactivity (1)?
- *
- * Decrease readiness of omap_device @od (thus increasing device
- * wakeup latency, but conserving power).  If @ignore_lat is
- * IGNORE_WAKEUP_LAT, make the omap_device fully inactive.  Otherwise,
- * if @ignore_lat is USE_WAKEUP_LAT, and the device's maximum wakeup
- * latency is less than the requested maximum wakeup latency, step
- * forwards in the omap_device_pm_latency table to ensure the device's
- * maximum wakeup latency is less than or equal to the requested
- * maximum wakeup latency.  Returns 0.
- */
-static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat)
-{
-	struct timespec a, b, c;
-
-	dev_dbg(&od->pdev->dev, "omap_device: deactivating\n");
-
-	while (od->pm_lat_level < od->pm_lats_cnt) {
-		struct omap_device_pm_latency *odpl;
-		unsigned long long deact_lat = 0;
-
-		odpl = od->pm_lats + od->pm_lat_level;
-
-		if (!ignore_lat &&
-		    ((od->dev_wakeup_lat + odpl->activate_lat) >
-		     od->_dev_wakeup_lat_limit))
-			break;
-
-		read_persistent_clock(&a);
-
-		/* XXX check return code */
-		odpl->deactivate_func(od);
-
-		read_persistent_clock(&b);
-
-		c = timespec_sub(b, a);
-		deact_lat = timespec_to_ns(&c);
-
-		dev_dbg(&od->pdev->dev,
-			"omap_device: pm_lat %d: deactivate: elapsed time %llu nsec\n",
-			od->pm_lat_level, deact_lat);
-
-		if (deact_lat > odpl->deactivate_lat) {
-			odpl->deactivate_lat_worst = deact_lat;
-			if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) {
-				odpl->deactivate_lat = deact_lat;
-				dev_dbg(&od->pdev->dev,
-					"new worst case deactivate latency %d: %llu\n",
-					od->pm_lat_level, deact_lat);
-			} else
-				dev_warn(&od->pdev->dev,
-					 "deactivate latency %d higher than expected. (%llu > %d)\n",
-					 od->pm_lat_level, deact_lat,
-					 odpl->deactivate_lat);
-		}
-
-		od->dev_wakeup_lat += odpl->activate_lat;
-
-		od->pm_lat_level++;
-	}
-
-	return 0;
-}
-
-static void _add_clkdev(struct omap_device *od, const char *clk_alias,
-		       const char *clk_name)
-{
-	struct clk *r;
-	struct clk_lookup *l;
-
-	if (!clk_alias || !clk_name)
-		return;
-
-	dev_dbg(&od->pdev->dev, "Creating %s -> %s\n", clk_alias, clk_name);
-
-	r = clk_get_sys(dev_name(&od->pdev->dev), clk_alias);
-	if (!IS_ERR(r)) {
-		dev_warn(&od->pdev->dev,
-			 "alias %s already exists\n", clk_alias);
-		clk_put(r);
-		return;
-	}
-
-	r = clk_get(NULL, clk_name);
-	if (IS_ERR(r)) {
-		dev_err(&od->pdev->dev,
-			"clk_get for %s failed\n", clk_name);
-		return;
-	}
-
-	l = clkdev_alloc(r, clk_alias, dev_name(&od->pdev->dev));
-	if (!l) {
-		dev_err(&od->pdev->dev,
-			"clkdev_alloc for %s failed\n", clk_alias);
-		return;
-	}
-
-	clkdev_add(l);
-}
-
-/**
- * _add_hwmod_clocks_clkdev - Add clkdev entry for hwmod optional clocks
- * and main clock
- * @od: struct omap_device *od
- * @oh: struct omap_hwmod *oh
- *
- * For the main clock and every optional clock present per hwmod per
- * omap_device, this function adds an entry in the clkdev table of the
- * form <dev-id=dev_name, con-id=role> if it does not exist already.
- *
- * The function is called from inside omap_device_build_ss(), after
- * omap_device_register.
- *
- * This allows drivers to get a pointer to its optional clocks based on its role
- * by calling clk_get(<dev*>, <role>).
- * In the case of the main clock, a "fck" alias is used.
- *
- * No return value.
- */
-static void _add_hwmod_clocks_clkdev(struct omap_device *od,
-				     struct omap_hwmod *oh)
-{
-	int i;
-
-	_add_clkdev(od, "fck", oh->main_clk);
-
-	for (i = 0; i < oh->opt_clks_cnt; i++)
-		_add_clkdev(od, oh->opt_clks[i].role, oh->opt_clks[i].clk);
-}
-
-
-/**
- * omap_device_build_from_dt - build an omap_device with multiple hwmods
- * @pdev_name: name of the platform_device driver to use
- * @pdev_id: this platform_device's connection ID
- * @oh: ptr to the single omap_hwmod that backs this omap_device
- * @pdata: platform_data ptr to associate with the platform_device
- * @pdata_len: amount of memory pointed to by @pdata
- * @pm_lats: pointer to a omap_device_pm_latency array for this device
- * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
- * @is_early_device: should the device be registered as an early device or not
- *
- * Function for building an omap_device already registered from device-tree
- *
- * Returns 0 or PTR_ERR() on error.
- */
-static int omap_device_build_from_dt(struct platform_device *pdev)
-{
-	struct omap_hwmod **hwmods;
-	struct omap_device *od;
-	struct omap_hwmod *oh;
-	struct device_node *node = pdev->dev.of_node;
-	const char *oh_name;
-	int oh_cnt, i, ret = 0;
-
-	oh_cnt = of_property_count_strings(node, "ti,hwmods");
-	if (!oh_cnt || IS_ERR_VALUE(oh_cnt)) {
-		dev_dbg(&pdev->dev, "No 'hwmods' to build omap_device\n");
-		return -ENODEV;
-	}
-
-	hwmods = kzalloc(sizeof(struct omap_hwmod *) * oh_cnt, GFP_KERNEL);
-	if (!hwmods) {
-		ret = -ENOMEM;
-		goto odbfd_exit;
-	}
-
-	for (i = 0; i < oh_cnt; i++) {
-		of_property_read_string_index(node, "ti,hwmods", i, &oh_name);
-		oh = omap_hwmod_lookup(oh_name);
-		if (!oh) {
-			dev_err(&pdev->dev, "Cannot lookup hwmod '%s'\n",
-				oh_name);
-			ret = -EINVAL;
-			goto odbfd_exit1;
-		}
-		hwmods[i] = oh;
-	}
-
-	od = omap_device_alloc(pdev, hwmods, oh_cnt, NULL, 0);
-	if (!od) {
-		dev_err(&pdev->dev, "Cannot allocate omap_device for :%s\n",
-			oh_name);
-		ret = PTR_ERR(od);
-		goto odbfd_exit1;
-	}
-
-	/* Fix up missing resource names */
-	for (i = 0; i < pdev->num_resources; i++) {
-		struct resource *r = &pdev->resource[i];
-
-		if (r->name == NULL)
-			r->name = dev_name(&pdev->dev);
-	}
-
-	if (of_get_property(node, "ti,no_idle_on_suspend", NULL))
-		omap_device_disable_idle_on_suspend(pdev);
-
-	pdev->dev.pm_domain = &omap_device_pm_domain;
-
-odbfd_exit1:
-	kfree(hwmods);
-odbfd_exit:
-	return ret;
-}
-
-static int _omap_device_notifier_call(struct notifier_block *nb,
-				      unsigned long event, void *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct omap_device *od;
-
-	switch (event) {
-	case BUS_NOTIFY_DEL_DEVICE:
-		if (pdev->archdata.od)
-			omap_device_delete(pdev->archdata.od);
-		break;
-	case BUS_NOTIFY_ADD_DEVICE:
-		if (pdev->dev.of_node)
-			omap_device_build_from_dt(pdev);
-		/* fall through */
-	default:
-		od = to_omap_device(pdev);
-		if (od)
-			od->_driver_status = event;
-	}
-
-	return NOTIFY_DONE;
-}
-
-
-/* Public functions for use by core code */
-
-/**
- * omap_device_get_context_loss_count - get lost context count
- * @od: struct omap_device *
- *
- * Using the primary hwmod, query the context loss count for this
- * device.
- *
- * Callers should consider context for this device lost any time this
- * function returns a value different than the value the caller got
- * the last time it called this function.
- *
- * If any hwmods exist for the omap_device assoiated with @pdev,
- * return the context loss counter for that hwmod, otherwise return
- * zero.
- */
-int omap_device_get_context_loss_count(struct platform_device *pdev)
-{
-	struct omap_device *od;
-	u32 ret = 0;
-
-	od = to_omap_device(pdev);
-
-	if (od->hwmods_cnt)
-		ret = omap_hwmod_get_context_loss_count(od->hwmods[0]);
-
-	return ret;
-}
-
-/**
- * omap_device_count_resources - count number of struct resource entries needed
- * @od: struct omap_device *
- *
- * Count the number of struct resource entries needed for this
- * omap_device @od.  Used by omap_device_build_ss() to determine how
- * much memory to allocate before calling
- * omap_device_fill_resources().  Returns the count.
- */
-static int omap_device_count_resources(struct omap_device *od)
-{
-	int c = 0;
-	int i;
-
-	for (i = 0; i < od->hwmods_cnt; i++)
-		c += omap_hwmod_count_resources(od->hwmods[i]);
-
-	pr_debug("omap_device: %s: counted %d total resources across %d hwmods\n",
-		 od->pdev->name, c, od->hwmods_cnt);
-
-	return c;
-}
-
-/**
- * omap_device_fill_resources - fill in array of struct resource
- * @od: struct omap_device *
- * @res: pointer to an array of struct resource to be filled in
- *
- * Populate one or more empty struct resource pointed to by @res with
- * the resource data for this omap_device @od.  Used by
- * omap_device_build_ss() after calling omap_device_count_resources().
- * Ideally this function would not be needed at all.  If omap_device
- * replaces platform_device, then we can specify our own
- * get_resource()/ get_irq()/etc functions that use the underlying
- * omap_hwmod information.  Or if platform_device is extended to use
- * subarchitecture-specific function pointers, the various
- * platform_device functions can simply call omap_device internal
- * functions to get device resources.  Hacking around the existing
- * platform_device code wastes memory.  Returns 0.
- */
-static int omap_device_fill_resources(struct omap_device *od,
-				      struct resource *res)
-{
-	int i, r;
-
-	for (i = 0; i < od->hwmods_cnt; i++) {
-		r = omap_hwmod_fill_resources(od->hwmods[i], res);
-		res += r;
-	}
-
-	return 0;
-}
-
-/**
- * _od_fill_dma_resources - fill in array of struct resource with dma resources
- * @od: struct omap_device *
- * @res: pointer to an array of struct resource to be filled in
- *
- * Populate one or more empty struct resource pointed to by @res with
- * the dma resource data for this omap_device @od.  Used by
- * omap_device_alloc() after calling omap_device_count_resources().
- *
- * Ideally this function would not be needed at all.  If we have
- * mechanism to get dma resources from DT.
- *
- * Returns 0.
- */
-static int _od_fill_dma_resources(struct omap_device *od,
-				      struct resource *res)
-{
-	int i, r;
-
-	for (i = 0; i < od->hwmods_cnt; i++) {
-		r = omap_hwmod_fill_dma_resources(od->hwmods[i], res);
-		res += r;
-	}
-
-	return 0;
-}
-
-/**
- * omap_device_alloc - allocate an omap_device
- * @pdev: platform_device that will be included in this omap_device
- * @oh: ptr to the single omap_hwmod that backs this omap_device
- * @pdata: platform_data ptr to associate with the platform_device
- * @pdata_len: amount of memory pointed to by @pdata
- * @pm_lats: pointer to a omap_device_pm_latency array for this device
- * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
- *
- * Convenience function for allocating an omap_device structure and filling
- * hwmods, resources and pm_latency attributes.
- *
- * Returns an struct omap_device pointer or ERR_PTR() on error;
- */
-struct omap_device *omap_device_alloc(struct platform_device *pdev,
-					struct omap_hwmod **ohs, int oh_cnt,
-					struct omap_device_pm_latency *pm_lats,
-					int pm_lats_cnt)
-{
-	int ret = -ENOMEM;
-	struct omap_device *od;
-	struct resource *res = NULL;
-	int i, res_count;
-	struct omap_hwmod **hwmods;
-
-	od = kzalloc(sizeof(struct omap_device), GFP_KERNEL);
-	if (!od) {
-		ret = -ENOMEM;
-		goto oda_exit1;
-	}
-	od->hwmods_cnt = oh_cnt;
-
-	hwmods = kmemdup(ohs, sizeof(struct omap_hwmod *) * oh_cnt, GFP_KERNEL);
-	if (!hwmods)
-		goto oda_exit2;
-
-	od->hwmods = hwmods;
-	od->pdev = pdev;
-
-	res_count = omap_device_count_resources(od);
-	/*
-	 * DT Boot:
-	 *   OF framework will construct the resource structure (currently
-	 *   does for MEM & IRQ resource) and we should respect/use these
-	 *   resources, killing hwmod dependency.
-	 *   If pdev->num_resources > 0, we assume that MEM & IRQ resources
-	 *   have been allocated by OF layer already (through DTB).
-	 *
-	 * Non-DT Boot:
-	 *   Here, pdev->num_resources = 0, and we should get all the
-	 *   resources from hwmod.
-	 *
-	 * TODO: Once DMA resource is available from OF layer, we should
-	 *   kill filling any resources from hwmod.
-	 */
-	if (res_count > pdev->num_resources) {
-		/* Allocate resources memory to account for new resources */
-		res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL);
-		if (!res)
-			goto oda_exit3;
-
-		/*
-		 * If pdev->num_resources > 0, then assume that,
-		 * MEM and IRQ resources will only come from DT and only
-		 * fill DMA resource from hwmod layer.
-		 */
-		if (pdev->num_resources && pdev->resource) {
-			dev_dbg(&pdev->dev, "%s(): resources already allocated %d\n",
-				__func__, res_count);
-			memcpy(res, pdev->resource,
-			       sizeof(struct resource) * pdev->num_resources);
-			_od_fill_dma_resources(od, &res[pdev->num_resources]);
-		} else {
-			dev_dbg(&pdev->dev, "%s(): using resources from hwmod %d\n",
-				__func__, res_count);
-			omap_device_fill_resources(od, res);
-		}
-
-		ret = platform_device_add_resources(pdev, res, res_count);
-		kfree(res);
-
-		if (ret)
-			goto oda_exit3;
-	}
-
-	if (!pm_lats) {
-		pm_lats = omap_default_latency;
-		pm_lats_cnt = ARRAY_SIZE(omap_default_latency);
-	}
-
-	od->pm_lats_cnt = pm_lats_cnt;
-	od->pm_lats = kmemdup(pm_lats,
-			sizeof(struct omap_device_pm_latency) * pm_lats_cnt,
-			GFP_KERNEL);
-	if (!od->pm_lats)
-		goto oda_exit3;
-
-	pdev->archdata.od = od;
-
-	for (i = 0; i < oh_cnt; i++) {
-		hwmods[i]->od = od;
-		_add_hwmod_clocks_clkdev(od, hwmods[i]);
-	}
-
-	return od;
-
-oda_exit3:
-	kfree(hwmods);
-oda_exit2:
-	kfree(od);
-oda_exit1:
-	dev_err(&pdev->dev, "omap_device: build failed (%d)\n", ret);
-
-	return ERR_PTR(ret);
-}
-
-void omap_device_delete(struct omap_device *od)
-{
-	if (!od)
-		return;
-
-	od->pdev->archdata.od = NULL;
-	kfree(od->pm_lats);
-	kfree(od->hwmods);
-	kfree(od);
-}
-
-/**
- * omap_device_build - build and register an omap_device with one omap_hwmod
- * @pdev_name: name of the platform_device driver to use
- * @pdev_id: this platform_device's connection ID
- * @oh: ptr to the single omap_hwmod that backs this omap_device
- * @pdata: platform_data ptr to associate with the platform_device
- * @pdata_len: amount of memory pointed to by @pdata
- * @pm_lats: pointer to a omap_device_pm_latency array for this device
- * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
- * @is_early_device: should the device be registered as an early device or not
- *
- * Convenience function for building and registering a single
- * omap_device record, which in turn builds and registers a
- * platform_device record.  See omap_device_build_ss() for more
- * information.  Returns ERR_PTR(-EINVAL) if @oh is NULL; otherwise,
- * passes along the return value of omap_device_build_ss().
- */
-struct platform_device __init *omap_device_build(const char *pdev_name, int pdev_id,
-				      struct omap_hwmod *oh, void *pdata,
-				      int pdata_len,
-				      struct omap_device_pm_latency *pm_lats,
-				      int pm_lats_cnt, int is_early_device)
-{
-	struct omap_hwmod *ohs[] = { oh };
-
-	if (!oh)
-		return ERR_PTR(-EINVAL);
-
-	return omap_device_build_ss(pdev_name, pdev_id, ohs, 1, pdata,
-				    pdata_len, pm_lats, pm_lats_cnt,
-				    is_early_device);
-}
-
-/**
- * omap_device_build_ss - build and register an omap_device with multiple hwmods
- * @pdev_name: name of the platform_device driver to use
- * @pdev_id: this platform_device's connection ID
- * @oh: ptr to the single omap_hwmod that backs this omap_device
- * @pdata: platform_data ptr to associate with the platform_device
- * @pdata_len: amount of memory pointed to by @pdata
- * @pm_lats: pointer to a omap_device_pm_latency array for this device
- * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
- * @is_early_device: should the device be registered as an early device or not
- *
- * Convenience function for building and registering an omap_device
- * subsystem record.  Subsystem records consist of multiple
- * omap_hwmods.  This function in turn builds and registers a
- * platform_device record.  Returns an ERR_PTR() on error, or passes
- * along the return value of omap_device_register().
- */
-struct platform_device __init *omap_device_build_ss(const char *pdev_name, int pdev_id,
-					 struct omap_hwmod **ohs, int oh_cnt,
-					 void *pdata, int pdata_len,
-					 struct omap_device_pm_latency *pm_lats,
-					 int pm_lats_cnt, int is_early_device)
-{
-	int ret = -ENOMEM;
-	struct platform_device *pdev;
-	struct omap_device *od;
-
-	if (!ohs || oh_cnt == 0 || !pdev_name)
-		return ERR_PTR(-EINVAL);
-
-	if (!pdata && pdata_len > 0)
-		return ERR_PTR(-EINVAL);
-
-	pdev = platform_device_alloc(pdev_name, pdev_id);
-	if (!pdev) {
-		ret = -ENOMEM;
-		goto odbs_exit;
-	}
-
-	/* Set the dev_name early to allow dev_xxx in omap_device_alloc */
-	if (pdev->id != -1)
-		dev_set_name(&pdev->dev, "%s.%d", pdev->name,  pdev->id);
-	else
-		dev_set_name(&pdev->dev, "%s", pdev->name);
-
-	od = omap_device_alloc(pdev, ohs, oh_cnt, pm_lats, pm_lats_cnt);
-	if (IS_ERR(od))
-		goto odbs_exit1;
-
-	ret = platform_device_add_data(pdev, pdata, pdata_len);
-	if (ret)
-		goto odbs_exit2;
-
-	if (is_early_device)
-		ret = omap_early_device_register(pdev);
-	else
-		ret = omap_device_register(pdev);
-	if (ret)
-		goto odbs_exit2;
-
-	return pdev;
-
-odbs_exit2:
-	omap_device_delete(od);
-odbs_exit1:
-	platform_device_put(pdev);
-odbs_exit:
-
-	pr_err("omap_device: %s: build failed (%d)\n", pdev_name, ret);
-
-	return ERR_PTR(ret);
-}
-
-/**
- * omap_early_device_register - register an omap_device as an early platform
- * device.
- * @od: struct omap_device * to register
- *
- * Register the omap_device structure.  This currently just calls
- * platform_early_add_device() on the underlying platform_device.
- * Returns 0 by default.
- */
-static int __init omap_early_device_register(struct platform_device *pdev)
-{
-	struct platform_device *devices[1];
-
-	devices[0] = pdev;
-	early_platform_add_devices(devices, 1);
-	return 0;
-}
-
-#ifdef CONFIG_PM_RUNTIME
-static int _od_runtime_suspend(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	int ret;
-
-	ret = pm_generic_runtime_suspend(dev);
-
-	if (!ret)
-		omap_device_idle(pdev);
-
-	return ret;
-}
-
-static int _od_runtime_idle(struct device *dev)
-{
-	return pm_generic_runtime_idle(dev);
-}
-
-static int _od_runtime_resume(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-
-	omap_device_enable(pdev);
-
-	return pm_generic_runtime_resume(dev);
-}
-#endif
-
-#ifdef CONFIG_SUSPEND
-static int _od_suspend_noirq(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct omap_device *od = to_omap_device(pdev);
-	int ret;
-
-	/* Don't attempt late suspend on a driver that is not bound */
-	if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER)
-		return 0;
-
-	ret = pm_generic_suspend_noirq(dev);
-
-	if (!ret && !pm_runtime_status_suspended(dev)) {
-		if (pm_generic_runtime_suspend(dev) == 0) {
-			if (!(od->flags & OMAP_DEVICE_NO_IDLE_ON_SUSPEND))
-				omap_device_idle(pdev);
-			od->flags |= OMAP_DEVICE_SUSPENDED;
-		}
-	}
-
-	return ret;
-}
-
-static int _od_resume_noirq(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct omap_device *od = to_omap_device(pdev);
-
-	if ((od->flags & OMAP_DEVICE_SUSPENDED) &&
-	    !pm_runtime_status_suspended(dev)) {
-		od->flags &= ~OMAP_DEVICE_SUSPENDED;
-		if (!(od->flags & OMAP_DEVICE_NO_IDLE_ON_SUSPEND))
-			omap_device_enable(pdev);
-		pm_generic_runtime_resume(dev);
-	}
-
-	return pm_generic_resume_noirq(dev);
-}
-#else
-#define _od_suspend_noirq NULL
-#define _od_resume_noirq NULL
-#endif
-
-struct dev_pm_domain omap_device_pm_domain = {
-	.ops = {
-		SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume,
-				   _od_runtime_idle)
-		USE_PLATFORM_PM_SLEEP_OPS
-		.suspend_noirq = _od_suspend_noirq,
-		.resume_noirq = _od_resume_noirq,
-	}
-};
-
-/**
- * omap_device_register - register an omap_device with one omap_hwmod
- * @od: struct omap_device * to register
- *
- * Register the omap_device structure.  This currently just calls
- * platform_device_register() on the underlying platform_device.
- * Returns the return value of platform_device_register().
- */
-int omap_device_register(struct platform_device *pdev)
-{
-	pr_debug("omap_device: %s: registering\n", pdev->name);
-
-	pdev->dev.pm_domain = &omap_device_pm_domain;
-	return platform_device_add(pdev);
-}
-
-
-/* Public functions for use by device drivers through struct platform_data */
-
-/**
- * omap_device_enable - fully activate an omap_device
- * @od: struct omap_device * to activate
- *
- * Do whatever is necessary for the hwmods underlying omap_device @od
- * to be accessible and ready to operate.  This generally involves
- * enabling clocks, setting SYSCONFIG registers; and in the future may
- * involve remuxing pins.  Device drivers should call this function
- * (through platform_data function pointers) where they would normally
- * enable clocks, etc.  Returns -EINVAL if called when the omap_device
- * is already enabled, or passes along the return value of
- * _omap_device_activate().
- */
-int omap_device_enable(struct platform_device *pdev)
-{
-	int ret;
-	struct omap_device *od;
-
-	od = to_omap_device(pdev);
-
-	if (od->_state == OMAP_DEVICE_STATE_ENABLED) {
-		dev_warn(&pdev->dev,
-			 "omap_device: %s() called from invalid state %d\n",
-			 __func__, od->_state);
-		return -EINVAL;
-	}
-
-	/* Enable everything if we're enabling this device from scratch */
-	if (od->_state == OMAP_DEVICE_STATE_UNKNOWN)
-		od->pm_lat_level = od->pm_lats_cnt;
-
-	ret = _omap_device_activate(od, IGNORE_WAKEUP_LAT);
-
-	od->dev_wakeup_lat = 0;
-	od->_dev_wakeup_lat_limit = UINT_MAX;
-	od->_state = OMAP_DEVICE_STATE_ENABLED;
-
-	return ret;
-}
-
-/**
- * omap_device_idle - idle an omap_device
- * @od: struct omap_device * to idle
- *
- * Idle omap_device @od by calling as many .deactivate_func() entries
- * in the omap_device's pm_lats table as is possible without exceeding
- * the device's maximum wakeup latency limit, pm_lat_limit.  Device
- * drivers should call this function (through platform_data function
- * pointers) where they would normally disable clocks after operations
- * complete, etc..  Returns -EINVAL if the omap_device is not
- * currently enabled, or passes along the return value of
- * _omap_device_deactivate().
- */
-int omap_device_idle(struct platform_device *pdev)
-{
-	int ret;
-	struct omap_device *od;
-
-	od = to_omap_device(pdev);
-
-	if (od->_state != OMAP_DEVICE_STATE_ENABLED) {
-		dev_warn(&pdev->dev,
-			 "omap_device: %s() called from invalid state %d\n",
-			 __func__, od->_state);
-		return -EINVAL;
-	}
-
-	ret = _omap_device_deactivate(od, USE_WAKEUP_LAT);
-
-	od->_state = OMAP_DEVICE_STATE_IDLE;
-
-	return ret;
-}
-
-/**
- * omap_device_shutdown - shut down an omap_device
- * @od: struct omap_device * to shut down
- *
- * Shut down omap_device @od by calling all .deactivate_func() entries
- * in the omap_device's pm_lats table and then shutting down all of
- * the underlying omap_hwmods.  Used when a device is being "removed"
- * or a device driver is being unloaded.  Returns -EINVAL if the
- * omap_device is not currently enabled or idle, or passes along the
- * return value of _omap_device_deactivate().
- */
-int omap_device_shutdown(struct platform_device *pdev)
-{
-	int ret, i;
-	struct omap_device *od;
-
-	od = to_omap_device(pdev);
-
-	if (od->_state != OMAP_DEVICE_STATE_ENABLED &&
-	    od->_state != OMAP_DEVICE_STATE_IDLE) {
-		dev_warn(&pdev->dev,
-			 "omap_device: %s() called from invalid state %d\n",
-			 __func__, od->_state);
-		return -EINVAL;
-	}
-
-	ret = _omap_device_deactivate(od, IGNORE_WAKEUP_LAT);
-
-	for (i = 0; i < od->hwmods_cnt; i++)
-		omap_hwmod_shutdown(od->hwmods[i]);
-
-	od->_state = OMAP_DEVICE_STATE_SHUTDOWN;
-
-	return ret;
-}
-
-/**
- * omap_device_assert_hardreset - set a device's hardreset line
- * @pdev: struct platform_device * to reset
- * @name: const char * name of the reset line
- *
- * Set the hardreset line identified by @name on the IP blocks
- * associated with the hwmods backing the platform_device @pdev.  All
- * of the hwmods associated with @pdev must have the same hardreset
- * line linked to them for this to work.  Passes along the return value
- * of omap_hwmod_assert_hardreset() in the event of any failure, or
- * returns 0 upon success.
- */
-int omap_device_assert_hardreset(struct platform_device *pdev, const char *name)
-{
-	struct omap_device *od = to_omap_device(pdev);
-	int ret = 0;
-	int i;
-
-	for (i = 0; i < od->hwmods_cnt; i++) {
-		ret = omap_hwmod_assert_hardreset(od->hwmods[i], name);
-		if (ret)
-			break;
-	}
-
-	return ret;
-}
-
-/**
- * omap_device_deassert_hardreset - release a device's hardreset line
- * @pdev: struct platform_device * to reset
- * @name: const char * name of the reset line
- *
- * Release the hardreset line identified by @name on the IP blocks
- * associated with the hwmods backing the platform_device @pdev.  All
- * of the hwmods associated with @pdev must have the same hardreset
- * line linked to them for this to work.  Passes along the return
- * value of omap_hwmod_deassert_hardreset() in the event of any
- * failure, or returns 0 upon success.
- */
-int omap_device_deassert_hardreset(struct platform_device *pdev,
-				   const char *name)
-{
-	struct omap_device *od = to_omap_device(pdev);
-	int ret = 0;
-	int i;
-
-	for (i = 0; i < od->hwmods_cnt; i++) {
-		ret = omap_hwmod_deassert_hardreset(od->hwmods[i], name);
-		if (ret)
-			break;
-	}
-
-	return ret;
-}
-
-/**
- * omap_device_align_pm_lat - activate/deactivate device to match wakeup lat lim
- * @od: struct omap_device *
- *
- * When a device's maximum wakeup latency limit changes, call some of
- * the .activate_func or .deactivate_func function pointers in the
- * omap_device's pm_lats array to ensure that the device's maximum
- * wakeup latency is less than or equal to the new latency limit.
- * Intended to be called by OMAP PM code whenever a device's maximum
- * wakeup latency limit changes (e.g., via
- * omap_pm_set_dev_wakeup_lat()).  Returns 0 if nothing needs to be
- * done (e.g., if the omap_device is not currently idle, or if the
- * wakeup latency is already current with the new limit) or passes
- * along the return value of _omap_device_deactivate() or
- * _omap_device_activate().
- */
-int omap_device_align_pm_lat(struct platform_device *pdev,
-			     u32 new_wakeup_lat_limit)
-{
-	int ret = -EINVAL;
-	struct omap_device *od;
-
-	od = to_omap_device(pdev);
-
-	if (new_wakeup_lat_limit == od->dev_wakeup_lat)
-		return 0;
-
-	od->_dev_wakeup_lat_limit = new_wakeup_lat_limit;
-
-	if (od->_state != OMAP_DEVICE_STATE_IDLE)
-		return 0;
-	else if (new_wakeup_lat_limit > od->dev_wakeup_lat)
-		ret = _omap_device_deactivate(od, USE_WAKEUP_LAT);
-	else if (new_wakeup_lat_limit < od->dev_wakeup_lat)
-		ret = _omap_device_activate(od, USE_WAKEUP_LAT);
-
-	return ret;
-}
-
-/**
- * omap_device_get_pwrdm - return the powerdomain * associated with @od
- * @od: struct omap_device *
- *
- * Return the powerdomain associated with the first underlying
- * omap_hwmod for this omap_device.  Intended for use by core OMAP PM
- * code.  Returns NULL on error or a struct powerdomain * upon
- * success.
- */
-struct powerdomain *omap_device_get_pwrdm(struct omap_device *od)
-{
-	/*
-	 * XXX Assumes that all omap_hwmod powerdomains are identical.
-	 * This may not necessarily be true.  There should be a sanity
-	 * check in here to WARN() if any difference appears.
-	 */
-	if (!od->hwmods_cnt)
-		return NULL;
-
-	return omap_hwmod_get_pwrdm(od->hwmods[0]);
-}
-
-/**
- * omap_device_get_mpu_rt_va - return the MPU's virtual addr for the hwmod base
- * @od: struct omap_device *
- *
- * Return the MPU's virtual address for the base of the hwmod, from
- * the ioremap() that the hwmod code does.  Only valid if there is one
- * hwmod associated with this device.  Returns NULL if there are zero
- * or more than one hwmods associated with this omap_device;
- * otherwise, passes along the return value from
- * omap_hwmod_get_mpu_rt_va().
- */
-void __iomem *omap_device_get_rt_va(struct omap_device *od)
-{
-	if (od->hwmods_cnt != 1)
-		return NULL;
-
-	return omap_hwmod_get_mpu_rt_va(od->hwmods[0]);
-}
-
-/**
- * omap_device_get_by_hwmod_name() - convert a hwmod name to
- * device pointer.
- * @oh_name: name of the hwmod device
- *
- * Returns back a struct device * pointer associated with a hwmod
- * device represented by a hwmod_name
- */
-struct device *omap_device_get_by_hwmod_name(const char *oh_name)
-{
-	struct omap_hwmod *oh;
-
-	if (!oh_name) {
-		WARN(1, "%s: no hwmod name!\n", __func__);
-		return ERR_PTR(-EINVAL);
-	}
-
-	oh = omap_hwmod_lookup(oh_name);
-	if (IS_ERR_OR_NULL(oh)) {
-		WARN(1, "%s: no hwmod for %s\n", __func__,
-			oh_name);
-		return ERR_PTR(oh ? PTR_ERR(oh) : -ENODEV);
-	}
-	if (IS_ERR_OR_NULL(oh->od)) {
-		WARN(1, "%s: no omap_device for %s\n", __func__,
-			oh_name);
-		return ERR_PTR(oh->od ? PTR_ERR(oh->od) : -ENODEV);
-	}
-
-	if (IS_ERR_OR_NULL(oh->od->pdev))
-		return ERR_PTR(oh->od->pdev ? PTR_ERR(oh->od->pdev) : -ENODEV);
-
-	return &oh->od->pdev->dev;
-}
-EXPORT_SYMBOL(omap_device_get_by_hwmod_name);
-
-/*
- * Public functions intended for use in omap_device_pm_latency
- * .activate_func and .deactivate_func function pointers
- */
-
-/**
- * omap_device_enable_hwmods - call omap_hwmod_enable() on all hwmods
- * @od: struct omap_device *od
- *
- * Enable all underlying hwmods.  Returns 0.
- */
-int omap_device_enable_hwmods(struct omap_device *od)
-{
-	int i;
-
-	for (i = 0; i < od->hwmods_cnt; i++)
-		omap_hwmod_enable(od->hwmods[i]);
-
-	/* XXX pass along return value here? */
-	return 0;
-}
-
-/**
- * omap_device_idle_hwmods - call omap_hwmod_idle() on all hwmods
- * @od: struct omap_device *od
- *
- * Idle all underlying hwmods.  Returns 0.
- */
-int omap_device_idle_hwmods(struct omap_device *od)
-{
-	int i;
-
-	for (i = 0; i < od->hwmods_cnt; i++)
-		omap_hwmod_idle(od->hwmods[i]);
-
-	/* XXX pass along return value here? */
-	return 0;
-}
-
-/**
- * omap_device_disable_clocks - disable all main and interface clocks
- * @od: struct omap_device *od
- *
- * Disable the main functional clock and interface clock for all of the
- * omap_hwmods associated with the omap_device.  Returns 0.
- */
-int omap_device_disable_clocks(struct omap_device *od)
-{
-	int i;
-
-	for (i = 0; i < od->hwmods_cnt; i++)
-		omap_hwmod_disable_clocks(od->hwmods[i]);
-
-	/* XXX pass along return value here? */
-	return 0;
-}
-
-/**
- * omap_device_enable_clocks - enable all main and interface clocks
- * @od: struct omap_device *od
- *
- * Enable the main functional clock and interface clock for all of the
- * omap_hwmods associated with the omap_device.  Returns 0.
- */
-int omap_device_enable_clocks(struct omap_device *od)
-{
-	int i;
-
-	for (i = 0; i < od->hwmods_cnt; i++)
-		omap_hwmod_enable_clocks(od->hwmods[i]);
-
-	/* XXX pass along return value here? */
-	return 0;
-}
-
-static struct notifier_block platform_nb = {
-	.notifier_call = _omap_device_notifier_call,
-};
-
-static int __init omap_device_init(void)
-{
-	bus_register_notifier(&platform_bus_type, &platform_nb);
-	return 0;
-}
-core_initcall(omap_device_init);
-
-/**
- * omap_device_late_idle - idle devices without drivers
- * @dev: struct device * associated with omap_device
- * @data: unused
- *
- * Check the driver bound status of this device, and idle it
- * if there is no driver attached.
- */
-static int __init omap_device_late_idle(struct device *dev, void *data)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct omap_device *od = to_omap_device(pdev);
-
-	if (!od)
-		return 0;
-
-	/*
-	 * If omap_device state is enabled, but has no driver bound,
-	 * idle it.
-	 */
-	if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER) {
-		if (od->_state == OMAP_DEVICE_STATE_ENABLED) {
-			dev_warn(dev, "%s: enabled but no driver.  Idling\n",
-				 __func__);
-			omap_device_idle(pdev);
-		}
-	}
-
-	return 0;
-}
-
-static int __init omap_device_late_init(void)
-{
-	bus_for_each_dev(&platform_bus_type, NULL, NULL, omap_device_late_idle);
-	return 0;
-}
-late_initcall(omap_device_late_init);
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 28acb383e7df..743fc2836f7a 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -20,198 +20,20 @@
 #include <linux/init.h>
 #include <linux/io.h>
 
+#include <asm/fncpy.h>
 #include <asm/tlb.h>
 #include <asm/cacheflush.h>
 
 #include <asm/mach/map.h>
 
-#include <plat/sram.h>
-#include <plat/cpu.h>
-
-#include "sram.h"
-
-/* XXX These "sideways" includes will disappear when sram.c becomes a driver */
-#include "../mach-omap2/iomap.h"
-#include "../mach-omap2/prm2xxx_3xxx.h"
-#include "../mach-omap2/sdrc.h"
-
-#define OMAP1_SRAM_PA		0x20000000
-#define OMAP2_SRAM_PUB_PA	(OMAP2_SRAM_PA + 0xf800)
-#define OMAP3_SRAM_PUB_PA       (OMAP3_SRAM_PA + 0x8000)
-#ifdef CONFIG_OMAP4_ERRATA_I688
-#define OMAP4_SRAM_PUB_PA	OMAP4_SRAM_PA
-#else
-#define OMAP4_SRAM_PUB_PA	(OMAP4_SRAM_PA + 0x4000)
-#endif
-#define OMAP5_SRAM_PA		0x40300000
-
-#if defined(CONFIG_ARCH_OMAP2PLUS)
-#define SRAM_BOOTLOADER_SZ	0x00
-#else
-#define SRAM_BOOTLOADER_SZ	0x80
-#endif
-
-#define OMAP24XX_VA_REQINFOPERM0	OMAP2_L3_IO_ADDRESS(0x68005048)
-#define OMAP24XX_VA_READPERM0		OMAP2_L3_IO_ADDRESS(0x68005050)
-#define OMAP24XX_VA_WRITEPERM0		OMAP2_L3_IO_ADDRESS(0x68005058)
-
-#define OMAP34XX_VA_REQINFOPERM0	OMAP2_L3_IO_ADDRESS(0x68012848)
-#define OMAP34XX_VA_READPERM0		OMAP2_L3_IO_ADDRESS(0x68012850)
-#define OMAP34XX_VA_WRITEPERM0		OMAP2_L3_IO_ADDRESS(0x68012858)
-#define OMAP34XX_VA_ADDR_MATCH2		OMAP2_L3_IO_ADDRESS(0x68012880)
-#define OMAP34XX_VA_SMS_RG_ATT0		OMAP2_L3_IO_ADDRESS(0x6C000048)
-
-#define GP_DEVICE		0x300
-
 #define ROUND_DOWN(value,boundary)	((value) & (~((boundary)-1)))
 
-static unsigned long omap_sram_start;
 static void __iomem *omap_sram_base;
 static unsigned long omap_sram_skip;
 static unsigned long omap_sram_size;
 static void __iomem *omap_sram_ceil;
 
 /*
- * Depending on the target RAMFS firewall setup, the public usable amount of
- * SRAM varies.  The default accessible size for all device types is 2k. A GP
- * device allows ARM11 but not other initiators for full size. This
- * functionality seems ok until some nice security API happens.
- */
-static int is_sram_locked(void)
-{
-	if (OMAP2_DEVICE_TYPE_GP == omap_type()) {
-		/* RAMFW: R/W access to all initiators for all qualifier sets */
-		if (cpu_is_omap242x()) {
-			__raw_writel(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */
-			__raw_writel(0xCFDE, OMAP24XX_VA_READPERM0);  /* all i-read */
-			__raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */
-		}
-		if (cpu_is_omap34xx()) {
-			__raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */
-			__raw_writel(0xFFFF, OMAP34XX_VA_READPERM0);  /* all i-read */
-			__raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */
-			__raw_writel(0x0, OMAP34XX_VA_ADDR_MATCH2);
-			__raw_writel(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0);
-		}
-		return 0;
-	} else
-		return 1; /* assume locked with no PPA or security driver */
-}
-
-/*
- * The amount of SRAM depends on the core type.
- * Note that we cannot try to test for SRAM here because writes
- * to secure SRAM will hang the system. Also the SRAM is not
- * yet mapped at this point.
- */
-static void __init omap_detect_sram(void)
-{
-	omap_sram_skip = SRAM_BOOTLOADER_SZ;
-	if (cpu_class_is_omap2()) {
-		if (is_sram_locked()) {
-			if (cpu_is_omap34xx()) {
-				omap_sram_start = OMAP3_SRAM_PUB_PA;
-				if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
-				    (omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
-					omap_sram_size = 0x7000; /* 28K */
-					omap_sram_skip += SZ_16K;
-				} else {
-					omap_sram_size = 0x8000; /* 32K */
-				}
-			} else if (cpu_is_omap44xx()) {
-				omap_sram_start = OMAP4_SRAM_PUB_PA;
-				omap_sram_size = 0xa000; /* 40K */
-			} else if (soc_is_omap54xx()) {
-				omap_sram_start = OMAP5_SRAM_PA;
-				omap_sram_size = SZ_128K; /* 128KB */
-			} else {
-				omap_sram_start = OMAP2_SRAM_PUB_PA;
-				omap_sram_size = 0x800; /* 2K */
-			}
-		} else {
-			if (soc_is_am33xx()) {
-				omap_sram_start = AM33XX_SRAM_PA;
-				omap_sram_size = 0x10000; /* 64K */
-			} else if (cpu_is_omap34xx()) {
-				omap_sram_start = OMAP3_SRAM_PA;
-				omap_sram_size = 0x10000; /* 64K */
-			} else if (cpu_is_omap44xx()) {
-				omap_sram_start = OMAP4_SRAM_PA;
-				omap_sram_size = 0xe000; /* 56K */
-			} else if (soc_is_omap54xx()) {
-				omap_sram_start = OMAP5_SRAM_PA;
-				omap_sram_size = SZ_128K; /* 128KB */
-			} else {
-				omap_sram_start = OMAP2_SRAM_PA;
-				if (cpu_is_omap242x())
-					omap_sram_size = 0xa0000; /* 640K */
-				else if (cpu_is_omap243x())
-					omap_sram_size = 0x10000; /* 64K */
-			}
-		}
-	} else {
-		omap_sram_start = OMAP1_SRAM_PA;
-
-		if (cpu_is_omap7xx())
-			omap_sram_size = 0x32000;	/* 200K */
-		else if (cpu_is_omap15xx())
-			omap_sram_size = 0x30000;	/* 192K */
-		else if (cpu_is_omap1610() || cpu_is_omap1611() ||
-				cpu_is_omap1621() || cpu_is_omap1710())
-			omap_sram_size = 0x4000;	/* 16K */
-		else {
-			pr_err("Could not detect SRAM size\n");
-			omap_sram_size = 0x4000;
-		}
-	}
-}
-
-/*
- * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early.
- */
-static void __init omap_map_sram(void)
-{
-	int cached = 1;
-
-	if (omap_sram_size == 0)
-		return;
-
-#ifdef CONFIG_OMAP4_ERRATA_I688
-	if (cpu_is_omap44xx()) {
-		omap_sram_start += PAGE_SIZE;
-		omap_sram_size -= SZ_16K;
-	}
-#endif
-	if (cpu_is_omap34xx()) {
-		/*
-		 * SRAM must be marked as non-cached on OMAP3 since the
-		 * CORE DPLL M2 divider change code (in SRAM) runs with the
-		 * SDRAM controller disabled, and if it is marked cached,
-		 * the ARM may attempt to write cache lines back to SDRAM
-		 * which will cause the system to hang.
-		 */
-		cached = 0;
-	}
-
-	omap_sram_start = ROUND_DOWN(omap_sram_start, PAGE_SIZE);
-	omap_sram_base = __arm_ioremap_exec(omap_sram_start, omap_sram_size,
-						cached);
-	if (!omap_sram_base) {
-		pr_err("SRAM: Could not map\n");
-		return;
-	}
-
-	omap_sram_ceil = omap_sram_base + omap_sram_size;
-
-	/*
-	 * Looks like we need to preserve some bootloader code at the
-	 * beginning of SRAM for jumping to flash for reboot to work...
-	 */
-	memset_io(omap_sram_base + omap_sram_skip, 0,
-		  omap_sram_size - omap_sram_skip);
-}
-
-/*
  * Memory allocator for SRAM: calculates the new ceiling address
  * for pushing a function using the fncpy API.
  *
@@ -236,171 +58,39 @@ void *omap_sram_push_address(unsigned long size)
 	return (void *)omap_sram_ceil;
 }
 
-#ifdef CONFIG_ARCH_OMAP1
-
-static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl);
-
-void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
-{
-	BUG_ON(!_omap_sram_reprogram_clock);
-	/* On 730, bit 13 must always be 1 */
-	if (cpu_is_omap7xx())
-		ckctl |= 0x2000;
-	_omap_sram_reprogram_clock(dpllctl, ckctl);
-}
-
-static int __init omap1_sram_init(void)
-{
-	_omap_sram_reprogram_clock =
-			omap_sram_push(omap1_sram_reprogram_clock,
-					omap1_sram_reprogram_clock_sz);
-
-	return 0;
-}
-
-#else
-#define omap1_sram_init()	do {} while (0)
-#endif
-
-#if defined(CONFIG_ARCH_OMAP2)
-
-static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
-			      u32 base_cs, u32 force_unlock);
-
-void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
-		   u32 base_cs, u32 force_unlock)
-{
-	BUG_ON(!_omap2_sram_ddr_init);
-	_omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl,
-			     base_cs, force_unlock);
-}
-
-static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val,
-					  u32 mem_type);
-
-void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type)
-{
-	BUG_ON(!_omap2_sram_reprogram_sdrc);
-	_omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type);
-}
-
-static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
-
-u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass)
-{
-	BUG_ON(!_omap2_set_prcm);
-	return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass);
-}
-#endif
-
-#ifdef CONFIG_SOC_OMAP2420
-static int __init omap242x_sram_init(void)
-{
-	_omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init,
-					omap242x_sram_ddr_init_sz);
-
-	_omap2_sram_reprogram_sdrc = omap_sram_push(omap242x_sram_reprogram_sdrc,
-					    omap242x_sram_reprogram_sdrc_sz);
-
-	_omap2_set_prcm = omap_sram_push(omap242x_sram_set_prcm,
-					 omap242x_sram_set_prcm_sz);
-
-	return 0;
-}
-#else
-static inline int omap242x_sram_init(void)
-{
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_SOC_OMAP2430
-static int __init omap243x_sram_init(void)
-{
-	_omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init,
-					omap243x_sram_ddr_init_sz);
-
-	_omap2_sram_reprogram_sdrc = omap_sram_push(omap243x_sram_reprogram_sdrc,
-					    omap243x_sram_reprogram_sdrc_sz);
-
-	_omap2_set_prcm = omap_sram_push(omap243x_sram_set_prcm,
-					 omap243x_sram_set_prcm_sz);
-
-	return 0;
-}
-#else
-static inline int omap243x_sram_init(void)
-{
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP3
-
-static u32 (*_omap3_sram_configure_core_dpll)(
-			u32 m2, u32 unlock_dll, u32 f, u32 inc,
-			u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
-			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
-			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
-			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
-
-u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc,
-			u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
-			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
-			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
-			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1)
-{
-	BUG_ON(!_omap3_sram_configure_core_dpll);
-	return _omap3_sram_configure_core_dpll(
-			m2, unlock_dll, f, inc,
-			sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0,
-			sdrc_actim_ctrl_b_0, sdrc_mr_0,
-			sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1,
-			sdrc_actim_ctrl_b_1, sdrc_mr_1);
-}
-
-void omap3_sram_restore_context(void)
+/*
+ * The SRAM context is lost during off-idle and stack
+ * needs to be reset.
+ */
+void omap_sram_reset(void)
 {
 	omap_sram_ceil = omap_sram_base + omap_sram_size;
-
-	_omap3_sram_configure_core_dpll =
-		omap_sram_push(omap3_sram_configure_core_dpll,
-			       omap3_sram_configure_core_dpll_sz);
-	omap_push_sram_idle();
 }
 
-static inline int omap34xx_sram_init(void)
-{
-	omap3_sram_restore_context();
-	return 0;
-}
-#else
-static inline int omap34xx_sram_init(void)
-{
-	return 0;
-}
-#endif /* CONFIG_ARCH_OMAP3 */
-
-static inline int am33xx_sram_init(void)
+/*
+ * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early.
+ */
+void __init omap_map_sram(unsigned long start, unsigned long size,
+				 unsigned long skip, int cached)
 {
-	return 0;
-}
+	if (size == 0)
+		return;
 
-int __init omap_sram_init(void)
-{
-	omap_detect_sram();
-	omap_map_sram();
+	start = ROUND_DOWN(start, PAGE_SIZE);
+	omap_sram_size = size;
+	omap_sram_skip = skip;
+	omap_sram_base = __arm_ioremap_exec(start, size, cached);
+	if (!omap_sram_base) {
+		pr_err("SRAM: Could not map\n");
+		return;
+	}
 
-	if (!(cpu_class_is_omap2()))
-		omap1_sram_init();
-	else if (cpu_is_omap242x())
-		omap242x_sram_init();
-	else if (cpu_is_omap2430())
-		omap243x_sram_init();
-	else if (soc_is_am33xx())
-		am33xx_sram_init();
-	else if (cpu_is_omap34xx())
-		omap34xx_sram_init();
+	omap_sram_reset();
 
-	return 0;
+	/*
+	 * Looks like we need to preserve some bootloader code at the
+	 * beginning of SRAM for jumping to flash for reboot to work...
+	 */
+	memset_io(omap_sram_base + omap_sram_skip, 0,
+		  omap_sram_size - omap_sram_skip);
 }
diff --git a/arch/arm/plat-omap/sram.h b/arch/arm/plat-omap/sram.h
deleted file mode 100644
index 29b43ef97f20..000000000000
--- a/arch/arm/plat-omap/sram.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __PLAT_OMAP_SRAM_H__
-#define __PLAT_OMAP_SRAM_H__
-
-extern int __init omap_sram_init(void);
-
-#endif /* __PLAT_OMAP_SRAM_H__ */