ARM: OMAP4: Add minimal support for omap4

This patch adds the support for OMAP4. The platform and machine specific
headers and sources updated for OMAP4430 SDP platform.

OMAP4430 is Texas Instrument's SOC based on ARM Cortex-A9 SMP architecture.
It's a dual core SOC with GIC used for interrupt handling and SCU for cache
coherency.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

21 files changed, 523 insertions, 57 deletions

diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 70b68ef83201..66738c3854c3 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -2,6 +2,10 @@
  * linux/arch/arm/plat-omap/common.c
  *
  * Code common to all OMAP machines.
+ * The file is created by Tony Lindgren <tony@atomide.com>
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -217,6 +221,15 @@ static cycle_t omap34xx_32k_read(struct clocksource *cs)
 #define omap34xx_32k_read	NULL
 #endif
 
+#ifdef CONFIG_ARCH_OMAP4
+static cycle_t omap44xx_32k_read(struct clocksource *cs)
+{
+	return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10);
+}
+#else
+#define omap44xx_32k_read	NULL
+#endif
+
 /*
  * Kernel assumes that sched_clock can be called early but may not have
  * things ready yet.
@@ -264,6 +277,8 @@ static int __init omap_init_clocksource_32k(void)
 			clocksource_32k.read = omap2430_32k_read;
 		else if (cpu_is_omap34xx())
 			clocksource_32k.read = omap34xx_32k_read;
+		else if (cpu_is_omap44xx())
+			clocksource_32k.read = omap44xx_32k_read;
 		else
 			return -ENODEV;
 
@@ -351,3 +366,19 @@ void __init omap2_set_globals_343x(void)
 }
 #endif
 
+#if defined(CONFIG_ARCH_OMAP4)
+static struct omap_globals omap4_globals = {
+	.class	= OMAP443X_CLASS,
+	.tap	= OMAP2_IO_ADDRESS(0x4830a000),
+	.ctrl	= OMAP2_IO_ADDRESS(OMAP443X_CTRL_BASE),
+	.prm	= OMAP2_IO_ADDRESS(OMAP4430_PRM_BASE),
+	.cm	= OMAP2_IO_ADDRESS(OMAP4430_CM_BASE),
+};
+
+void __init omap2_set_globals_443x(void)
+{
+	omap2_set_globals_tap(&omap4_globals);
+	omap2_set_globals_control(&omap4_globals);
+}
+#endif
+
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 87fb7ff41794..a64b692a1bfe 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -311,6 +311,8 @@ static void omap_init_wdt(void)
 		wdt_resources[0].start = 0x49016000; /* WDT2 */
 	else if (cpu_is_omap343x())
 		wdt_resources[0].start = 0x48314000; /* WDT2 */
+	else if (cpu_is_omap44xx())
+		wdt_resources[0].start = 0x4a314000;
 	else
 		return;
 
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 06e9cbe8b8eb..def14ec265b3 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -10,6 +10,9 @@
  * Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com>
  * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * Support functions for the OMAP internal DMA channels.
  *
  * This program is free software; you can redistribute it and/or modify
@@ -872,7 +875,7 @@ omap_dma_set_prio_lch(int lch, unsigned char read_prio,
 	}
 	l = dma_read(CCR(lch));
 	l &= ~((1 << 6) | (1 << 26));
-	if (cpu_is_omap2430() || cpu_is_omap34xx())
+	if (cpu_is_omap2430() || cpu_is_omap34xx() ||  cpu_is_omap44xx())
 		l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26);
 	else
 		l |= ((read_prio & 0x1) << 6);
@@ -1844,7 +1847,8 @@ static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id)
 #define omap1_dma_irq_handler	NULL
 #endif
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+			defined(CONFIG_ARCH_OMAP4)
 
 static int omap2_dma_handle_ch(int ch)
 {
@@ -2339,6 +2343,9 @@ static int __init omap_init_dma(void)
 	} else if (cpu_is_omap34xx()) {
 		omap_dma_base = IO_ADDRESS(OMAP34XX_DMA4_BASE);
 		dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
+	} else if (cpu_is_omap44xx()) {
+		omap_dma_base = IO_ADDRESS(OMAP44XX_DMA4_BASE);
+		dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
 	} else {
 		pr_err("DMA init failed for unsupported omap\n");
 		return -ENODEV;
@@ -2437,12 +2444,18 @@ static int __init omap_init_dma(void)
 		}
 	}
 
-	if (cpu_is_omap2430() || cpu_is_omap34xx())
+	if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx())
 		omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE,
 				DMA_DEFAULT_FIFO_DEPTH, 0);
 
-	if (cpu_class_is_omap2())
-		setup_irq(INT_24XX_SDMA_IRQ0, &omap24xx_dma_irq);
+	if (cpu_class_is_omap2()) {
+		int irq;
+		if (cpu_is_omap44xx())
+			irq = INT_44XX_SDMA_IRQ0;
+		else
+			irq = INT_24XX_SDMA_IRQ0;
+		setup_irq(irq, &omap24xx_dma_irq);
+	}
 
 	/* FIXME: Update LCD DMA to work on 24xx */
 	if (cpu_class_is_omap1()) {
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index ee206122f507..7f50b6103dee 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -7,6 +7,9 @@
  * OMAP2 support by Juha Yrjola
  * API improvements and OMAP2 clock framework support by Timo Teras
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
  * Free Software Foundation; either version 2 of the License, or (at your
@@ -150,7 +153,8 @@
 struct omap_dm_timer {
 	unsigned long phys_base;
 	int irq;
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+			defined(CONFIG_ARCH_OMAP4)
 	struct clk *iclk, *fclk;
 #endif
 	void __iomem *io_base;
@@ -169,6 +173,9 @@ struct omap_dm_timer {
 #define omap3_dm_timers			NULL
 #define omap3_dm_source_names		NULL
 #define omap3_dm_source_clocks		NULL
+#define omap4_dm_timers			NULL
+#define omap4_dm_source_names		NULL
+#define omap4_dm_source_clocks		NULL
 
 static struct omap_dm_timer omap1_dm_timers[] = {
 	{ .phys_base = 0xfffb1400, .irq = INT_1610_GPTIMER1 },
@@ -191,6 +198,9 @@ static const int dm_timer_count = ARRAY_SIZE(omap1_dm_timers);
 #define omap3_dm_timers			NULL
 #define omap3_dm_source_names		NULL
 #define omap3_dm_source_clocks		NULL
+#define omap4_dm_timers			NULL
+#define omap4_dm_source_names		NULL
+#define omap4_dm_source_clocks		NULL
 
 static struct omap_dm_timer omap2_dm_timers[] = {
 	{ .phys_base = 0x48028000, .irq = INT_24XX_GPTIMER1 },
@@ -225,6 +235,9 @@ static const int dm_timer_count = ARRAY_SIZE(omap2_dm_timers);
 #define omap2_dm_timers			NULL
 #define omap2_dm_source_names		NULL
 #define omap2_dm_source_clocks		NULL
+#define omap4_dm_timers			NULL
+#define omap4_dm_source_names		NULL
+#define omap4_dm_source_clocks		NULL
 
 static struct omap_dm_timer omap3_dm_timers[] = {
 	{ .phys_base = 0x48318000, .irq = INT_24XX_GPTIMER1 },
@@ -250,6 +263,40 @@ static const char *omap3_dm_source_names[] __initdata = {
 static struct clk *omap3_dm_source_clocks[2];
 static const int dm_timer_count = ARRAY_SIZE(omap3_dm_timers);
 
+#elif defined(CONFIG_ARCH_OMAP4)
+
+#define omap_dm_clk_enable(x)		clk_enable(x)
+#define omap_dm_clk_disable(x)		clk_disable(x)
+#define omap1_dm_timers			NULL
+#define omap2_dm_timers			NULL
+#define omap2_dm_source_names		NULL
+#define omap2_dm_source_clocks		NULL
+#define omap3_dm_timers			NULL
+#define omap3_dm_source_names		NULL
+#define omap3_dm_source_clocks		NULL
+
+static struct omap_dm_timer omap4_dm_timers[] = {
+	{ .phys_base = 0x4a318000, .irq = INT_44XX_GPTIMER1 },
+	{ .phys_base = 0x48032000, .irq = INT_44XX_GPTIMER2 },
+	{ .phys_base = 0x48034000, .irq = INT_44XX_GPTIMER3 },
+	{ .phys_base = 0x48036000, .irq = INT_44XX_GPTIMER4 },
+	{ .phys_base = 0x40138000, .irq = INT_44XX_GPTIMER5 },
+	{ .phys_base = 0x4013a000, .irq = INT_44XX_GPTIMER6 },
+	{ .phys_base = 0x4013a000, .irq = INT_44XX_GPTIMER7 },
+	{ .phys_base = 0x4013e000, .irq = INT_44XX_GPTIMER8 },
+	{ .phys_base = 0x4803e000, .irq = INT_44XX_GPTIMER9 },
+	{ .phys_base = 0x48086000, .irq = INT_44XX_GPTIMER10 },
+	{ .phys_base = 0x48088000, .irq = INT_44XX_GPTIMER11 },
+	{ .phys_base = 0x4a320000, .irq = INT_44XX_GPTIMER12 },
+};
+static const char *omap4_dm_source_names[] __initdata = {
+	"sys_ck",
+	"omap_32k_fck",
+	NULL
+};
+static struct clk *omap4_dm_source_clocks[2];
+static const int dm_timer_count = ARRAY_SIZE(omap4_dm_timers);
+
 #else
 
 #error OMAP architecture not supported!
@@ -459,7 +506,8 @@ __u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
 }
 EXPORT_SYMBOL_GPL(omap_dm_timer_modify_idlect_mask);
 
-#elif defined(CONFIG_ARCH_OMAP2) || defined (CONFIG_ARCH_OMAP3)
+#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+				defined(CONFIG_ARCH_OMAP4)
 
 struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
 {
@@ -711,6 +759,10 @@ int __init omap_dm_timer_init(void)
 		dm_timers = omap3_dm_timers;
 		dm_source_names = omap3_dm_source_names;
 		dm_source_clocks = omap3_dm_source_clocks;
+	} else if (cpu_is_omap44xx()) {
+		dm_timers = omap4_dm_timers;
+		dm_source_names = omap4_dm_source_names;
+		dm_source_clocks = omap4_dm_source_clocks;
 	}
 
 	if (cpu_class_is_omap2())
@@ -723,7 +775,8 @@ int __init omap_dm_timer_init(void)
 	for (i = 0; i < dm_timer_count; i++) {
 		timer = &dm_timers[i];
 		timer->io_base = IO_ADDRESS(timer->phys_base);
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+					defined(CONFIG_ARCH_OMAP4)
 		if (cpu_class_is_omap2()) {
 			char clk_name[16];
 			sprintf(clk_name, "gpt%d_ick", i + 1);
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index ee0b21f5b094..7fd89ba8d3b5 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -6,6 +6,9 @@
  * Copyright (C) 2003-2005 Nokia Corporation
  * Written by Juha Yrjölä <juha.yrjola@nokia.com>
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -146,6 +149,16 @@
 #define OMAP34XX_GPIO5_BASE		IO_ADDRESS(0x49056000)
 #define OMAP34XX_GPIO6_BASE		IO_ADDRESS(0x49058000)
 
+/*
+ * OMAP44XX  specific GPIO registers
+ */
+#define OMAP44XX_GPIO1_BASE             IO_ADDRESS(0x4a310000)
+#define OMAP44XX_GPIO2_BASE             IO_ADDRESS(0x48055000)
+#define OMAP44XX_GPIO3_BASE             IO_ADDRESS(0x48057000)
+#define OMAP44XX_GPIO4_BASE             IO_ADDRESS(0x48059000)
+#define OMAP44XX_GPIO5_BASE             IO_ADDRESS(0x4805B000)
+#define OMAP44XX_GPIO6_BASE             IO_ADDRESS(0x4805D000)
+
 #define OMAP_MPUIO_VBASE		IO_ADDRESS(OMAP_MPUIO_BASE)
 
 struct gpio_bank {
@@ -153,11 +166,13 @@ struct gpio_bank {
 	u16 irq;
 	u16 virtual_irq_start;
 	int method;
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) ||  \
+		defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
 	u32 suspend_wakeup;
 	u32 saved_wakeup;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 	u32 non_wakeup_gpios;
 	u32 enabled_non_wakeup_gpios;
 
@@ -251,6 +266,24 @@ static struct gpio_bank gpio_bank_34xx[6] = {
 
 #endif
 
+#ifdef CONFIG_ARCH_OMAP4
+static struct gpio_bank gpio_bank_44xx[6] = {
+	{ OMAP44XX_GPIO1_BASE, INT_44XX_GPIO_BANK1, IH_GPIO_BASE,	\
+		METHOD_GPIO_24XX },
+	{ OMAP44XX_GPIO2_BASE, INT_44XX_GPIO_BANK2, IH_GPIO_BASE + 32,	\
+		METHOD_GPIO_24XX },
+	{ OMAP44XX_GPIO3_BASE, INT_44XX_GPIO_BANK3, IH_GPIO_BASE + 64,	\
+		METHOD_GPIO_24XX },
+	{ OMAP44XX_GPIO4_BASE, INT_44XX_GPIO_BANK4, IH_GPIO_BASE + 96,	\
+		METHOD_GPIO_24XX },
+	{ OMAP44XX_GPIO5_BASE, INT_44XX_GPIO_BANK5, IH_GPIO_BASE + 128, \
+		METHOD_GPIO_24XX },
+	{ OMAP44XX_GPIO6_BASE, INT_44XX_GPIO_BANK6, IH_GPIO_BASE + 160, \
+		METHOD_GPIO_24XX },
+};
+
+#endif
+
 static struct gpio_bank *gpio_bank;
 static int gpio_bank_count;
 
@@ -273,7 +306,7 @@ static inline struct gpio_bank *get_gpio_bank(int gpio)
 	}
 	if (cpu_is_omap24xx())
 		return &gpio_bank[gpio >> 5];
-	if (cpu_is_omap34xx())
+	if (cpu_is_omap34xx() || cpu_is_omap44xx())
 		return &gpio_bank[gpio >> 5];
 	BUG();
 	return NULL;
@@ -285,7 +318,7 @@ static inline int get_gpio_index(int gpio)
 		return gpio & 0x1f;
 	if (cpu_is_omap24xx())
 		return gpio & 0x1f;
-	if (cpu_is_omap34xx())
+	if (cpu_is_omap34xx() || cpu_is_omap44xx())
 		return gpio & 0x1f;
 	return gpio & 0x0f;
 }
@@ -307,7 +340,7 @@ static inline int gpio_valid(int gpio)
 		return 0;
 	if (cpu_is_omap24xx() && gpio < 128)
 		return 0;
-	if (cpu_is_omap34xx() && gpio < 192)
+	if ((cpu_is_omap34xx() || cpu_is_omap44xx()) && gpio < 192)
 		return 0;
 	return -1;
 }
@@ -353,7 +386,8 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
 		reg += OMAP850_GPIO_DIR_CONTROL;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_OE;
 		break;
@@ -425,7 +459,8 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
 			l &= ~(1 << gpio);
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		if (enable)
 			reg += OMAP24XX_GPIO_SETDATAOUT;
@@ -476,7 +511,8 @@ static int __omap_get_gpio_datain(int gpio)
 		reg += OMAP850_GPIO_DATA_INPUT;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_DATAIN;
 		break;
@@ -520,7 +556,7 @@ void omap_set_gpio_debounce(int gpio, int enable)
 	else
 		goto done;
 
-	if (cpu_is_omap34xx()) {
+	if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
 		if (enable)
 			clk_enable(bank->dbck);
 		else
@@ -550,7 +586,8 @@ void omap_set_gpio_debounce_time(int gpio, int enc_time)
 }
 EXPORT_SYMBOL(omap_set_gpio_debounce_time);
 
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
 						int trigger)
 {
@@ -660,7 +697,8 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 			goto bad;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		set_24xx_gpio_triggering(bank, gpio, trigger);
 		break;
@@ -745,7 +783,8 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 		reg += OMAP850_GPIO_INT_STATUS;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_IRQSTATUS1;
 		break;
@@ -814,7 +853,8 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
 		inv = 1;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_IRQENABLE1;
 		mask = 0xffffffff;
@@ -887,7 +927,8 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
 			l |= gpio_mask;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+		defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		if (enable)
 			reg += OMAP24XX_GPIO_SETIRQENABLE1;
@@ -932,7 +973,8 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
 		spin_unlock_irqrestore(&bank->lock, flags);
 		return 0;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		if (bank->non_wakeup_gpios & (1 << gpio)) {
 			printk(KERN_ERR "Unable to modify wakeup on "
@@ -1017,7 +1059,8 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
 		__raw_writel(1 << offset, reg);
 	}
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 	if (bank->method == METHOD_GPIO_24XX) {
 		/* Disable wake-up during idle for dynamic tick */
 		void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
@@ -1069,7 +1112,8 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 	if (bank->method == METHOD_GPIO_850)
 		isr_reg = bank->base + OMAP850_GPIO_INT_STATUS;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 	if (bank->method == METHOD_GPIO_24XX)
 		isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1;
 #endif
@@ -1346,7 +1390,7 @@ static int gpio_2irq(struct gpio_chip *chip, unsigned offset)
 /*---------------------------------------------------------------------*/
 
 static int initialized;
-#if !defined(CONFIG_ARCH_OMAP3)
+#if !(defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4))
 static struct clk * gpio_ick;
 #endif
 
@@ -1359,7 +1403,7 @@ static struct clk * gpio5_ick;
 static struct clk * gpio5_fck;
 #endif
 
-#if defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
 static struct clk *gpio_iclks[OMAP34XX_NR_GPIOS];
 #endif
 
@@ -1419,8 +1463,8 @@ static int __init _omap_gpio_init(void)
 	}
 #endif
 
-#if defined(CONFIG_ARCH_OMAP3)
-	if (cpu_is_omap34xx()) {
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
+	if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
 		for (i = 0; i < OMAP34XX_NR_GPIOS; i++) {
 			sprintf(clk_name, "gpio%d_ick", i + 1);
 			gpio_iclks[i] = clk_get(NULL, clk_name);
@@ -1497,6 +1541,17 @@ static int __init _omap_gpio_init(void)
 			(rev >> 4) & 0x0f, rev & 0x0f);
 	}
 #endif
+#ifdef CONFIG_ARCH_OMAP4
+	if (cpu_is_omap44xx()) {
+		int rev;
+
+		gpio_bank_count = OMAP34XX_NR_GPIOS;
+		gpio_bank = gpio_bank_44xx;
+		rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
+		printk(KERN_INFO "OMAP44xx GPIO hardware version %d.%d\n",
+			(rev >> 4) & 0x0f, rev & 0x0f);
+	}
+#endif
 	for (i = 0; i < gpio_bank_count; i++) {
 		int j, gpio_count = 16;
 
@@ -1520,7 +1575,8 @@ static int __init _omap_gpio_init(void)
 			gpio_count = 32; /* 730 has 32-bit GPIOs */
 		}
 
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 		if (bank->method == METHOD_GPIO_24XX) {
 			static const u32 non_wakeup_gpios[] = {
 				0xe203ffc0, 0x08700040
@@ -1577,7 +1633,7 @@ static int __init _omap_gpio_init(void)
 		set_irq_chained_handler(bank->irq, gpio_irq_handler);
 		set_irq_data(bank->irq, bank);
 
-		if (cpu_is_omap34xx()) {
+		if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
 			sprintf(clk_name, "gpio%d_dbck", i + 1);
 			bank->dbck = clk_get(NULL, clk_name);
 			if (IS_ERR(bank->dbck))
@@ -1599,7 +1655,8 @@ static int __init _omap_gpio_init(void)
 	return 0;
 }
 
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
+		defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
 static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
 {
 	int i;
@@ -1622,7 +1679,8 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
 			wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
 			break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 		case METHOD_GPIO_24XX:
 			wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN;
 			wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
@@ -1663,7 +1721,8 @@ static int omap_gpio_resume(struct sys_device *dev)
 			wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
 			break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 		case METHOD_GPIO_24XX:
 			wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
 			wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
@@ -1695,7 +1754,8 @@ static struct sys_device omap_gpio_device = {
 
 #endif
 
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 
 static int workaround_enabled;
 
@@ -1711,7 +1771,8 @@ void omap2_gpio_prepare_for_retention(void)
 
 		if (!(bank->enabled_non_wakeup_gpios))
 			continue;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 		bank->saved_datain = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
 		l1 = __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
 		l2 = __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
@@ -1720,7 +1781,8 @@ void omap2_gpio_prepare_for_retention(void)
 		bank->saved_risingdetect = l2;
 		l1 &= ~bank->enabled_non_wakeup_gpios;
 		l2 &= ~bank->enabled_non_wakeup_gpios;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 		__raw_writel(l1, bank->base + OMAP24XX_GPIO_FALLINGDETECT);
 		__raw_writel(l2, bank->base + OMAP24XX_GPIO_RISINGDETECT);
 #endif
@@ -1745,7 +1807,8 @@ void omap2_gpio_resume_after_retention(void)
 
 		if (!(bank->enabled_non_wakeup_gpios))
 			continue;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 		__raw_writel(bank->saved_fallingdetect,
 				 bank->base + OMAP24XX_GPIO_FALLINGDETECT);
 		__raw_writel(bank->saved_risingdetect,
@@ -1755,14 +1818,16 @@ void omap2_gpio_resume_after_retention(void)
 		 * state.  If so, generate an IRQ by software.  This is
 		 * horribly racy, but it's the best we can do to work around
 		 * this silicon bug. */
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 		l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
 #endif
 		l ^= bank->saved_datain;
 		l &= bank->non_wakeup_gpios;
 		if (l) {
 			u32 old0, old1;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 			old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
 			old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
 			__raw_writel(old0 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
@@ -1798,7 +1863,8 @@ static int __init omap_gpio_sysinit(void)
 
 	mpuio_init();
 
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
+		defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
 	if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
 		if (ret == 0) {
 			ret = sysdev_class_register(&omap_gpio_sysclass);
@@ -1887,7 +1953,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
 
 			irqstat = irq_desc[irq].status;
 #if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) ||	\
-		defined(CONFIG_ARCH_OMAP34XX)
+		defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
 			if (is_in && ((bank->suspend_wakeup & mask)
 					|| irqstat & IRQ_TYPE_SENSE_MASK)) {
 				char	*trigger = NULL;
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
index 073a2c5569f0..c20e02ec3034 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -22,7 +22,8 @@ struct clkops {
 	void			(*disable)(struct clk *);
 };
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+		defined(CONFIG_ARCH_OMAP4)
 
 struct clksel_rate {
 	u32			val;
@@ -51,7 +52,7 @@ struct dpll_data {
 	u8			max_divider;
 	u32			max_tolerance;
 	u16			max_multiplier;
-#  if defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
 	u8			modes;
 	void __iomem		*autoidle_reg;
 	void __iomem		*idlest_reg;
@@ -83,7 +84,8 @@ struct clk {
 	void			(*init)(struct clk *);
 	__u8			enable_bit;
 	__s8			usecount;
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+		defined(CONFIG_ARCH_OMAP4)
 	u8			fixed_div;
 	void __iomem		*clksel_reg;
 	u32			clksel_mask;
diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/mach/common.h
index 0ecf36deb17b..4b188334c666 100644
--- a/arch/arm/plat-omap/include/mach/common.h
+++ b/arch/arm/plat-omap/include/mach/common.h
@@ -62,6 +62,7 @@ struct omap_globals {
 void omap2_set_globals_242x(void);
 void omap2_set_globals_243x(void);
 void omap2_set_globals_343x(void);
+void omap2_set_globals_443x(void);
 
 /* These get called from omap2_set_globals_xxxx(), do not call these */
 void omap2_set_globals_tap(struct omap_globals *);
diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h
index 269147f3836f..f45ec621da96 100644
--- a/arch/arm/plat-omap/include/mach/control.h
+++ b/arch/arm/plat-omap/include/mach/control.h
@@ -1,9 +1,9 @@
 /*
  * arch/arm/plat-omap/include/mach/control.h
  *
- * OMAP2/3 System Control Module definitions
+ * OMAP2/3/4 System Control Module definitions
  *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2009 Texas Instruments, Inc.
  * Copyright (C) 2007-2008 Nokia Corporation
  *
  * Written by Paul Walmsley
@@ -190,7 +190,8 @@
 #define OMAP2_PBIASLITEVMODE0		(1 << 0)
 
 #ifndef __ASSEMBLY__
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+		defined(CONFIG_ARCH_OMAP4)
 extern void __iomem *omap_ctrl_base_get(void);
 extern u8 omap_ctrl_readb(u16 offset);
 extern u16 omap_ctrl_readw(u16 offset);
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
index 98b144252364..fc60c4ebcc28 100644
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -5,8 +5,12 @@
  *
  * Copyright (C) 2004, 2008 Nokia Corporation
  *
+ * Copyright (C) 2009 Texas Instruments.
+ *
  * Written by Tony Lindgren <tony.lindgren@nokia.com>
  *
+ * Added OMAP4 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -155,6 +159,8 @@ IS_OMAP_SUBCLASS(343x, 0x343)
 #define cpu_is_omap243x()		0
 #define cpu_is_omap34xx()		0
 #define cpu_is_omap343x()		0
+#define cpu_is_omap44xx()		0
+#define cpu_is_omap443x()		0
 
 #if defined(MULTI_OMAP1)
 # if defined(CONFIG_ARCH_OMAP730)
@@ -348,12 +354,21 @@ IS_OMAP_TYPE(3430, 0x3430)
 # define cpu_is_omap3430()		is_omap3430()
 #endif
 
+# if defined(CONFIG_ARCH_OMAP4)
+# undef cpu_is_omap44xx
+# undef cpu_is_omap443x
+# define cpu_is_omap44xx()		1
+# define cpu_is_omap443x()		1
+# endif
+
 /* Macros to detect if we have OMAP1 or OMAP2 */
 #define cpu_class_is_omap1()	(cpu_is_omap7xx() || cpu_is_omap15xx() || \
 				cpu_is_omap16xx())
-#define cpu_class_is_omap2()	(cpu_is_omap24xx() || cpu_is_omap34xx())
+#define cpu_class_is_omap2()	(cpu_is_omap24xx() || cpu_is_omap34xx() || \
+				cpu_is_omap44xx())
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+			defined(CONFIG_ARCH_OMAP4)
 
 /* Various silicon revisions for omap2 */
 #define OMAP242X_CLASS		0x24200024
@@ -370,6 +385,8 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define OMAP3430_REV_ES3_0	0x34303034
 #define OMAP3430_REV_ES3_1	0x34304034
 
+#define OMAP443X_CLASS		0x44300034
+
 /*
  * omap_chip bits
  *
diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/plat-omap/include/mach/debug-macro.S
index 1b11f5c6a2d9..ac24050e3416 100644
--- a/arch/arm/plat-omap/include/mach/debug-macro.S
+++ b/arch/arm/plat-omap/include/mach/debug-macro.S
@@ -36,7 +36,7 @@
 		add	\rx, \rx, #0x00004000	@ UART 3
 #endif
 
-#elif	CONFIG_ARCH_OMAP3
+#elif defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
 		moveq	\rx, #0x48000000	@ physical base address
 		movne	\rx, #0xd8000000	@ virtual base
 		orr	\rx, \rx, #0x0006a000
diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h
index 19df76f97ab3..8c1eae88737e 100644
--- a/arch/arm/plat-omap/include/mach/dma.h
+++ b/arch/arm/plat-omap/include/mach/dma.h
@@ -48,6 +48,7 @@
 /* Hardware registers for omap2 and omap3 */
 #define OMAP24XX_DMA4_BASE		(L4_24XX_BASE + 0x56000)
 #define OMAP34XX_DMA4_BASE		(L4_34XX_BASE + 0x56000)
+#define OMAP44XX_DMA4_BASE		(L4_44XX_BASE + 0x56000)
 
 #define OMAP_DMA4_REVISION		0x00
 #define OMAP_DMA4_GCR			0x78
diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S
index 33256a0e9a28..00f45c01390d 100644
--- a/arch/arm/plat-omap/include/mach/entry-macro.S
+++ b/arch/arm/plat-omap/include/mach/entry-macro.S
@@ -3,6 +3,9 @@
  *
  * Low-level IRQ helper macros for OMAP-based platforms
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This file is licensed under  the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
@@ -10,6 +13,7 @@
 #include <mach/hardware.h>
 #include <mach/io.h>
 #include <mach/irqs.h>
+#include <asm/hardware/gic.h>
 
 #if defined(CONFIG_ARCH_OMAP1)
 
@@ -56,7 +60,8 @@
 		.endm
 
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 
 #include <mach/omap24xx.h>
 #include <mach/omap34xx.h>
@@ -67,7 +72,9 @@
 #elif defined(CONFIG_ARCH_OMAP34XX)
 #define OMAP2_VA_IC_BASE		IO_ADDRESS(OMAP34XX_IC_BASE)
 #endif
-
+#if defined(CONFIG_ARCH_OMAP4)
+#include <mach/omap44xx.h>
+#endif
 #define INTCPS_SIR_IRQ_OFFSET	0x0040		/* Active interrupt offset */
 #define	ACTIVEIRQ_MASK		0x7f		/* Active interrupt bits */
 
@@ -80,6 +87,7 @@
 		.macro  arch_ret_to_user, tmp1, tmp2
 		.endm
 
+#ifndef CONFIG_ARCH_OMAP4
 		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
 		ldr	\base, =OMAP2_VA_IC_BASE
 		ldr	\irqnr, [\base, #0x98] /* IRQ pending reg 1 */
@@ -95,6 +103,40 @@
 		and	\irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */
 
 		.endm
+#else
+		/*
+		 * The interrupt numbering scheme is defined in the
+		 * interrupt controller spec.  To wit:
+		 *
+		 * Interrupts 0-15 are IPI
+		 * 16-28 are reserved
+		 * 29-31 are local.  We allow 30 to be used for the watchdog.
+		 * 32-1020 are global
+		 * 1021-1022 are reserved
+		 * 1023 is "spurious" (no interrupt)
+		 *
+		 * For now, we ignore all local interrupts so only return an
+		 * interrupt if it's between 30 and 1020.  The test_for_ipi
+		 * routine below will pick up on IPIs.
+		 * A simple read from the controller will tell us the number
+		 * of the highest priority enabled interrupt.
+		 * We then just need to check whether it is in the
+		 * valid range for an IRQ (30-1020 inclusive).
+		 */
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr     \base, =OMAP44XX_VA_GIC_CPU_BASE
+		ldr     \irqstat, [\base, #GIC_CPU_INTACK]
+
+		ldr     \tmp, =1021
+
+		bic     \irqnr, \irqstat, #0x1c00
+
+		cmp     \irqnr, #29
+		cmpcc   \irqnr, \irqnr
+		cmpne   \irqnr, \tmp
+		cmpcs   \irqnr, \irqnr
+		.endm
+#endif
 
 		.macro	irq_prio_table
 		.endm
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
index 3dc423ed3e80..26c1fbff08aa 100644
--- a/arch/arm/plat-omap/include/mach/hardware.h
+++ b/arch/arm/plat-omap/include/mach/hardware.h
@@ -285,5 +285,6 @@
 #include "omap16xx.h"
 #include "omap24xx.h"
 #include "omap34xx.h"
+#include "omap44xx.h"
 
 #endif	/* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
index 0610d7e2b3d7..3b2814720569 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -6,6 +6,9 @@
  * Copied from arch/arm/mach-sa1100/include/mach/io.h
  * Copyright (C) 1997-1999 Russell King
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
  * Free Software Foundation; either version 2 of the License, or (at your
@@ -157,6 +160,40 @@
 #define DSP_MMU_34XX_VIRT	0xe2000000
 #define DSP_MMU_34XX_SIZE	SZ_4K
 
+
+#elif defined(CONFIG_ARCH_OMAP4)
+/* We map both L3 and L4 on OMAP4 */
+#define L3_44XX_PHYS		L3_44XX_BASE
+#define L3_44XX_VIRT		0xd4000000
+#define L3_44XX_SIZE		SZ_1M
+
+#define L4_44XX_PHYS		L4_44XX_BASE
+#define L4_44XX_VIRT		0xda000000
+#define L4_44XX_SIZE		SZ_4M
+
+
+#define L4_WK_44XX_PHYS		L4_WK_44XX_BASE
+#define L4_WK_44XX_VIRT		0xda300000
+#define L4_WK_44XX_SIZE		SZ_1M
+
+#define L4_PER_44XX_PHYS	L4_PER_44XX_BASE
+#define L4_PER_44XX_VIRT	0xd8000000
+#define L4_PER_44XX_SIZE	SZ_4M
+
+#define L4_EMU_44XX_PHYS	L4_EMU_44XX_BASE
+#define L4_EMU_44XX_VIRT	0xe4000000
+#define L4_EMU_44XX_SIZE	SZ_64M
+
+#define OMAP44XX_GPMC_PHYS	OMAP44XX_GPMC_BASE
+#define OMAP44XX_GPMC_VIRT	0xe0000000
+#define OMAP44XX_GPMC_SIZE	SZ_1M
+
+
+#define IO_OFFSET		0x90000000
+#define __IO_ADDRESS(pa)	((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define __OMAP2_IO_ADDRESS(pa)	((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define io_v2p(va)		((va) - IO_OFFSET)/* Works for L3 and L4 */
+
 #endif
 
 #define IO_ADDRESS(pa)		IOMEM(__IO_ADDRESS(pa))
diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h
index 7f57ee66f364..5bc331e93cf2 100644
--- a/arch/arm/plat-omap/include/mach/irqs.h
+++ b/arch/arm/plat-omap/include/mach/irqs.h
@@ -4,6 +4,9 @@
  *  Copyright (C) Greg Lonnon 2001
  *  Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -422,6 +425,92 @@
 
 #define	INT_34XX_BENCH_MPU_EMUL	3
 
+
+#define IRQ_GIC_START		32
+
+#define INT_44XX_BENCH_MPU_EMUL	(3 + IRQ_GIC_START)
+#define INT_44XX_SSM_ABORT_IRQ	(6 + IRQ_GIC_START)
+#define INT_44XX_SYS_NIRQ	(7 + IRQ_GIC_START)
+#define INT_44XX_D2D_FW_IRQ	(8 + IRQ_GIC_START)
+#define INT_44XX_PRCM_MPU_IRQ	(11 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ0	(12 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ1	(13 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ2	(14 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ3	(15 + IRQ_GIC_START)
+#define INT_44XX_ISS_IRQ	(24 + IRQ_GIC_START)
+#define INT_44XX_DSS_IRQ	(25 + IRQ_GIC_START)
+#define INT_44XX_MAIL_U0_MPU	(26 + IRQ_GIC_START)
+#define INT_44XX_DSP_MMU	(28 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER1	(37 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER2	(38 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER3	(39 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER4	(40 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER5	(41 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER6	(42 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER7	(43 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER8	(44 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER9	(45 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER10	(46 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER11	(47 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER12	(95 + IRQ_GIC_START)
+#define INT_44XX_SHA1MD5	(51 + IRQ_GIC_START)
+#define INT_44XX_I2C1_IRQ	(56 + IRQ_GIC_START)
+#define INT_44XX_I2C2_IRQ	(57 + IRQ_GIC_START)
+#define INT_44XX_HDQ_IRQ	(58 + IRQ_GIC_START)
+#define INT_44XX_SPI1_IRQ	(65 + IRQ_GIC_START)
+#define INT_44XX_SPI2_IRQ	(66 + IRQ_GIC_START)
+#define INT_44XX_HSI_1_IRQ0	(67 + IRQ_GIC_START)
+#define INT_44XX_HSI_2_IRQ1	(68 + IRQ_GIC_START)
+#define INT_44XX_HSI_1_DMAIRQ	(71 + IRQ_GIC_START)
+#define INT_44XX_UART1_IRQ	(72 + IRQ_GIC_START)
+#define INT_44XX_UART2_IRQ	(73 + IRQ_GIC_START)
+#define INT_44XX_UART3_IRQ	(74 + IRQ_GIC_START)
+#define INT_44XX_UART4_IRQ	(70 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_NISO	(76 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_ISO	(77 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_HGEN	(78 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_HSOF	(79 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_OTG	(80 + IRQ_GIC_START)
+#define INT_44XX_MCBSP4_IRQ_TX	(81 + IRQ_GIC_START)
+#define INT_44XX_MCBSP4_IRQ_RX	(82 + IRQ_GIC_START)
+#define INT_44XX_MMC_IRQ	(83 + IRQ_GIC_START)
+#define INT_44XX_MMC2_IRQ	(86 + IRQ_GIC_START)
+#define INT_44XX_MCBSP2_IRQ_TX	(89 + IRQ_GIC_START)
+#define INT_44XX_MCBSP2_IRQ_RX	(90 + IRQ_GIC_START)
+#define INT_44XX_SPI3_IRQ	(91 + IRQ_GIC_START)
+#define INT_44XX_SPI5_IRQ	(69 + IRQ_GIC_START)
+
+#define INT_44XX_MCBSP5_IRQ	(16 + IRQ_GIC_START)
+#define INT_44xX_MCBSP1_IRQ	(17 + IRQ_GIC_START)
+#define INT_44XX_MCBSP2_IRQ	(22 + IRQ_GIC_START)
+#define INT_44XX_MCBSP3_IRQ	(23 + IRQ_GIC_START)
+#define INT_44XX_MCBSP4_IRQ	(27 + IRQ_GIC_START)
+#define INT_44XX_HS_USB_MC	(92 + IRQ_GIC_START)
+#define INT_44XX_HS_USB_DMA	(93 + IRQ_GIC_START)
+
+#define INT_44XX_GPIO_BANK1	(29 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK2	(30 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK3	(31 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK4	(32 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK5	(33 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK6	(34 + IRQ_GIC_START)
+#define INT_44XX_USIM_IRQ	(35 + IRQ_GIC_START)
+#define INT_44XX_WDT3_IRQ	(36 + IRQ_GIC_START)
+#define INT_44XX_SPI4_IRQ	(48 + IRQ_GIC_START)
+#define INT_44XX_SHA1MD52_IRQ	(49 + IRQ_GIC_START)
+#define INT_44XX_FPKA_READY_IRQ	(50 + IRQ_GIC_START)
+#define INT_44XX_SHA1MD51_IRQ	(51 + IRQ_GIC_START)
+#define INT_44XX_RNG_IRQ	(52 + IRQ_GIC_START)
+#define INT_44XX_I2C3_IRQ	(61 + IRQ_GIC_START)
+#define INT_44XX_FPKA_ERROR_IRQ	(64 + IRQ_GIC_START)
+#define INT_44XX_PBIAS_IRQ	(75 + IRQ_GIC_START)
+#define INT_44XX_OHCI_IRQ	(76 + IRQ_GIC_START)
+#define INT_44XX_EHCI_IRQ	(77 + IRQ_GIC_START)
+#define INT_44XX_TLL_IRQ	(78 + IRQ_GIC_START)
+#define INT_44XX_PARTHASH_IRQ	(79 + IRQ_GIC_START)
+#define INT_44XX_MMC3_IRQ	(94 + IRQ_GIC_START)
+
+
 /* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
  * 16 MPUIO lines */
 #define OMAP_MAX_GPIO_LINES	192
diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h
index 99ed564d9277..9ad41dc484c1 100644
--- a/arch/arm/plat-omap/include/mach/memory.h
+++ b/arch/arm/plat-omap/include/mach/memory.h
@@ -38,7 +38,8 @@
  */
 #if defined(CONFIG_ARCH_OMAP1)
 #define PHYS_OFFSET		UL(0x10000000)
-#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+			defined(CONFIG_ARCH_OMAP4)
 #define PHYS_OFFSET		UL(0x80000000)
 #endif
 
diff --git a/arch/arm/plat-omap/include/mach/omap44xx.h b/arch/arm/plat-omap/include/mach/omap44xx.h
new file mode 100644
index 000000000000..15dec7f1c7c0
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap44xx.h
@@ -0,0 +1,46 @@
+/*:
+ * Address mappings and base address for OMAP4 interconnects
+ * and peripherals.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_OMAP44XX_H
+#define __ASM_ARCH_OMAP44XX_H
+
+/*
+ * Please place only base defines here and put the rest in device
+ * specific headers.
+ */
+#define L4_44XX_BASE			0x4a000000
+#define L4_WK_44XX_BASE			0x4a300000
+#define L4_PER_44XX_BASE		0x48000000
+#define L4_EMU_44XX_BASE		0x54000000
+#define L3_44XX_BASE			0x44000000
+#define OMAP4430_32KSYNCT_BASE		0x4a304000
+#define OMAP4430_CM_BASE		0x4a004000
+#define OMAP4430_PRM_BASE		0x48306000
+#define OMAP44XX_GPMC_BASE		0x50000000
+#define OMAP443X_SCM_BASE		0x4a002000
+#define OMAP443X_CTRL_BASE		OMAP443X_SCM_BASE
+#define OMAP44XX_IC_BASE		0x48200000
+#define OMAP44XX_IVA_INTC_BASE		0x40000000
+#define IRQ_SIR_IRQ			0x0040
+#define OMAP44XX_GIC_DIST_BASE		0x48241000
+#define OMAP44XX_GIC_CPU_BASE		0x48240100
+#define OMAP44XX_VA_GIC_CPU_BASE	IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
+#define OMAP44XX_SCU_BASE		0x48240000
+#define OMAP44XX_VA_SCU_BASE		IO_ADDRESS(OMAP44XX_SCU_BASE)
+#define OMAP44XX_LOCAL_TWD_BASE		0x48240600
+#define OMAP44XX_VA_LOCAL_TWD_BASE	IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE)
+#define OMAP44XX_LOCAL_TWD_SIZE		0x00000100
+#define OMAP44XX_WKUPGEN_BASE		0x48281000
+#define OMAP44XX_VA_WKUPGEN_BASE	IO_ADDRESS(OMAP44XX_WKUPGEN_BASE)
+
+#endif /* __ASM_ARCH_OMAP44XX_H */
+
diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h
index 8a676a04be48..e37894e423bd 100644
--- a/arch/arm/plat-omap/include/mach/serial.h
+++ b/arch/arm/plat-omap/include/mach/serial.h
@@ -1,5 +1,8 @@
 /*
- *  arch/arm/plat-omap/include/mach/serial.h
+ * arch/arm/plat-omap/include/mach/serial.h
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Addded OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -15,19 +18,28 @@
 #define OMAP_UART1_BASE		0xfffb0000
 #define OMAP_UART2_BASE		0xfffb0800
 #define OMAP_UART3_BASE		0xfffb9800
+#define OMAP_MAX_NR_PORTS	3
 #elif defined(CONFIG_ARCH_OMAP2)
 /* OMAP2 serial ports */
 #define OMAP_UART1_BASE		0x4806a000
 #define OMAP_UART2_BASE		0x4806c000
 #define OMAP_UART3_BASE		0x4806e000
+#define OMAP_MAX_NR_PORTS	3
 #elif defined(CONFIG_ARCH_OMAP3)
 /* OMAP3 serial ports */
 #define OMAP_UART1_BASE		0x4806a000
 #define OMAP_UART2_BASE		0x4806c000
 #define OMAP_UART3_BASE		0x49020000
+#define OMAP_MAX_NR_PORTS	3
+#elif defined(CONFIG_ARCH_OMAP4)
+/* OMAP4 serial ports */
+#define OMAP_UART1_BASE		0x4806a000
+#define OMAP_UART2_BASE		0x4806c000
+#define OMAP_UART3_BASE		0x48020000
+#define OMAP_UART4_BASE		0x4806e000
+#define OMAP_MAX_NR_PORTS	4
 #endif
 
-#define OMAP_MAX_NR_PORTS	3
 #define OMAP1510_BASE_BAUD	(12000000/16)
 #define OMAP16XX_BASE_BAUD	(48000000/16)
 #define OMAP24XX_BASE_BAUD	(48000000/16)
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
index af326efc1ad3..9b42d72d96cf 100644
--- a/arch/arm/plat-omap/io.c
+++ b/arch/arm/plat-omap/io.c
@@ -1,3 +1,14 @@
+/*
+ * Common io.c file
+ * This file is created by Russell King <rmk+kernel@arm.linux.org.uk>
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
 #include <linux/module.h>
 #include <linux/io.h>
 #include <linux/mm.h>
@@ -7,6 +18,7 @@
 #include <mach/omap16xx.h>
 #include <mach/omap24xx.h>
 #include <mach/omap34xx.h>
+#include <mach/omap44xx.h>
 
 #define BETWEEN(p,st,sz)	((p) >= (st) && (p) < ((st) + (sz)))
 #define XLATE(p,pst,vst)	((void __iomem *)((p) - (pst) + (vst)))
@@ -92,7 +104,22 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
 			return XLATE(p, L4_EMU_34XX_PHYS, L4_EMU_34XX_VIRT);
 	}
 #endif
-
+#ifdef CONFIG_ARCH_OMAP4
+	if (cpu_is_omap44xx()) {
+		if (BETWEEN(p, L3_44XX_PHYS, L3_44XX_SIZE))
+			return XLATE(p, L3_44XX_PHYS, L3_44XX_VIRT);
+		if (BETWEEN(p, L4_44XX_PHYS, L4_44XX_SIZE))
+			return XLATE(p, L4_44XX_PHYS, L4_44XX_VIRT);
+		if (BETWEEN(p, L4_WK_44XX_PHYS, L4_WK_44XX_SIZE))
+			return XLATE(p, L4_WK_44XX_PHYS, L4_WK_44XX_VIRT);
+		if (BETWEEN(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_SIZE))
+			return XLATE(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_VIRT);
+		if (BETWEEN(p, L4_PER_44XX_PHYS, L4_PER_44XX_SIZE))
+			return XLATE(p, L4_PER_44XX_PHYS, L4_PER_44XX_VIRT);
+		if (BETWEEN(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_SIZE))
+			return XLATE(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_VIRT);
+	}
+#endif
 	return __arm_ioremap(p, size, type);
 }
 EXPORT_SYMBOL(omap_ioremap);
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
index 80b040fd5ca7..8d329fb20740 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -54,6 +54,9 @@ int __init_or_module omap_cfg_reg(const unsigned long index)
 {
 	struct pin_config *reg;
 
+	if (cpu_is_omap44xx())
+		return 0;
+
 	if (mux_cfg == NULL) {
 		printk(KERN_ERR "Pin mux table not initialized\n");
 		return -ENODEV;
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 102c9f71a3c1..67a90708b682 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -6,6 +6,9 @@
  * Copyright (C) 2005 Nokia Corporation
  * Written by Tony Lindgren <tony@atomide.com>
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -44,6 +47,8 @@
 #define OMAP3_SRAM_VA           0xd7000000
 #define OMAP3_SRAM_PUB_PA       0x40208000
 #define OMAP3_SRAM_PUB_VA       0xd7008000
+#define OMAP4_SRAM_PA		0x40200000		/*0x402f0000*/
+#define OMAP4_SRAM_VA		0xd7000000		/*0xd70f0000*/
 
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 #define SRAM_BOOTLOADER_SZ	0x00
@@ -87,6 +92,10 @@ static int is_sram_locked(void)
 {
 	int type = 0;
 
+	if (cpu_is_omap44xx())
+		/* Not yet supported */
+		return 0;
+
 	if (cpu_is_omap242x())
 		type = omap_rev() & OMAP2_DEVICETYPE_MASK;
 
@@ -135,6 +144,10 @@ void __init omap_detect_sram(void)
 				omap_sram_base = OMAP3_SRAM_VA;
 				omap_sram_start = OMAP3_SRAM_PA;
 				omap_sram_size = 0x10000; /* 64K */
+			} else if (cpu_is_omap44xx()) {
+				omap_sram_base = OMAP4_SRAM_VA;
+				omap_sram_start = OMAP4_SRAM_PA;
+				omap_sram_size = 0x8000; /* 32K */
 			} else {
 				omap_sram_base = OMAP2_SRAM_VA;
 				omap_sram_start = OMAP2_SRAM_PA;
@@ -203,6 +216,12 @@ void __init omap_map_sram(void)
 		omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
 	}
 
+	if (cpu_is_omap44xx()) {
+		omap_sram_io_desc[0].virtual = OMAP4_SRAM_VA;
+		base = OMAP4_SRAM_PA;
+		base = ROUND_DOWN(base, PAGE_SIZE);
+		omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
+	}
 	omap_sram_io_desc[0].length = 1024 * 1024;	/* Use section desc */
 	iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
 
@@ -391,6 +410,8 @@ int __init omap_sram_init(void)
 		omap243x_sram_init();
 	else if (cpu_is_omap34xx())
 		omap34xx_sram_init();
+	else if (cpu_is_omap44xx())
+		omap34xx_sram_init(); /* FIXME: */
 
 	return 0;
 }