Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC-specific updates from Arnd Bergmann:
 "This is a larger set of new functionality for the existing SoC
  families, including:

   - vt8500 gains support for new CPU cores, notably the Cortex-A9 based
     wm8850

   - prima2 gains support for the "marco" SoC family, its SMP based
     cousin

   - tegra gains support for the new Tegra4 (Tegra114) family

   - socfpga now supports a newer version of the hardware including SMP

   - i.mx31 and bcm2835 are now using DT probing for their clocks

   - lots of updates for sh-mobile

   - OMAP updates for clocks, power management and USB

   - i.mx6q and tegra now support cpuidle

   - kirkwood now supports PCIe hot plugging

   - tegra clock support is updated

   - tegra USB PHY probing gets implemented diffently"

* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (148 commits)
  ARM: prima2: remove duplicate v7_invalidate_l1
  ARM: shmobile: r8a7779: Correct TMU clock support again
  ARM: prima2: fix __init section for cpu hotplug
  ARM: OMAP: Consolidate OMAP USB-HS platform data (part 3/3)
  ARM: OMAP: Consolidate OMAP USB-HS platform data (part 1/3)
  arm: socfpga: Add SMP support for actual socfpga harware
  arm: Add v7_invalidate_l1 to cache-v7.S
  arm: socfpga: Add entries to enable make dtbs socfpga
  arm: socfpga: Add new device tree source for actual socfpga HW
  ARM: tegra: sort Kconfig selects for Tegra114
  ARM: tegra: enable ARCH_REQUIRE_GPIOLIB for Tegra114
  ARM: tegra: Fix build error w/ ARCH_TEGRA_114_SOC w/o ARCH_TEGRA_3x_SOC
  ARM: tegra: Fix build error for gic update
  ARM: tegra: remove empty tegra_smp_init_cpus()
  ARM: shmobile: Register ARM architected timer
  ARM: MARCO: fix the build issue due to gic-vic-to-irqchip move
  ARM: shmobile: r8a7779: Correct TMU clock support
  ARM: mxs_defconfig: Select CONFIG_DEVTMPFS_MOUNT
  ARM: mxs: decrease mxs_clockevent_device.min_delta_ns to 2 clock cycles
  ARM: mxs: use apbx bus clock to drive the timers on timrotv2
  ...

1 files changed, 46 insertions, 0 deletions

diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index 7539ec275065..15451ee4acc8 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -19,6 +19,52 @@
 #include "proc-macros.S"
 
 /*
+ * The secondary kernel init calls v7_flush_dcache_all before it enables
+ * the L1; however, the L1 comes out of reset in an undefined state, so
+ * the clean + invalidate performed by v7_flush_dcache_all causes a bunch
+ * of cache lines with uninitialized data and uninitialized tags to get
+ * written out to memory, which does really unpleasant things to the main
+ * processor.  We fix this by performing an invalidate, rather than a
+ * clean + invalidate, before jumping into the kernel.
+ *
+ * This function is cloned from arch/arm/mach-tegra/headsmp.S, and needs
+ * to be called for both secondary cores startup and primary core resume
+ * procedures.
+ */
+ENTRY(v7_invalidate_l1)
+       mov     r0, #0
+       mcr     p15, 2, r0, c0, c0, 0
+       mrc     p15, 1, r0, c0, c0, 0
+
+       ldr     r1, =0x7fff
+       and     r2, r1, r0, lsr #13
+
+       ldr     r1, =0x3ff
+
+       and     r3, r1, r0, lsr #3      @ NumWays - 1
+       add     r2, r2, #1              @ NumSets
+
+       and     r0, r0, #0x7
+       add     r0, r0, #4      @ SetShift
+
+       clz     r1, r3          @ WayShift
+       add     r4, r3, #1      @ NumWays
+1:     sub     r2, r2, #1      @ NumSets--
+       mov     r3, r4          @ Temp = NumWays
+2:     subs    r3, r3, #1      @ Temp--
+       mov     r5, r3, lsl r1
+       mov     r6, r2, lsl r0
+       orr     r5, r5, r6      @ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
+       mcr     p15, 0, r5, c7, c6, 2
+       bgt     2b
+       cmp     r2, #0
+       bgt     1b
+       dsb
+       isb
+       mov     pc, lr
+ENDPROC(v7_invalidate_l1)
+
+/*
  *	v7_flush_icache_all()
  *
  *	Flush the whole I-cache.