Merge tag 'soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next

Pull part one of ARM SoC updates from Olof Johansson:
 "A quite large set of SoC updates this cycle.  In no particular order:

   - Multi-cluster power management for Samsung Exynos, adding support
     for big.LITTLE CPU switching on EXYNOS5

   - SMP support for Marvell Armada 375 and 38x

   - SMP rework on Allwinner A31

   - Xilinx Zynq support for SOC_BUS, big endian

   - Marvell orion5x platform cleanup, modernizing the implementation
     and moving to DT.

   - _Finally_ moving Samsung Exynos over to support MULTIPLATFORM, so
     that their platform can be enabled in the same kernel binary as
     most of the other v7 platforms in the tree.  \o/

     The work isn't quite complete, there's some driver fixes still
     needed, but the basics now work.

  New SoC support added:

   - Freescale i.MX6SX

   - LSI Axxia AXM55xx SoCs

   - Samsung EXYNOS 3250, 5260, 5410, 5420 and 5800

   - STi STIH407

  plus a large set of various smaller updates for different platforms.
  I'm probably missing some important one here"

* tag 'soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (281 commits)
  ARM: exynos: don't run exynos4 l2x0 setup on other platforms
  ARM: exynos: Fix "allmodconfig" build errors in mcpm and hotplug
  ARM: EXYNOS: mcpm rename the power_down_finish
  ARM: EXYNOS: Enable mcpm for dual-cluster exynos5800 SoC
  ARM: EXYNOS: Enable multi-platform build support
  ARM: EXYNOS: Consolidate Kconfig entries
  ARM: EXYNOS: Add support for EXYNOS5410 SoC
  ARM: EXYNOS: Support secondary CPU boot of Exynos3250
  ARM: EXYNOS: Add Exynos3250 SoC ID
  ARM: EXYNOS: Add 5800 SoC support
  ARM: EXYNOS: initial board support for exynos5260 SoC
  clk: exynos5410: register clocks using common clock framework
  ARM: debug: qcom: add UART addresses to Kconfig help for APQ8084
  ARM: sunxi: allow building without reset controller
  Documentation: devicetree: arm: sort enable-method entries
  ARM: rockchip: convert smp bringup to CPU_METHOD_OF_DECLARE
  clk: exynos5250: Add missing sysmmu clocks for DISP and ISP blocks
  ARM: dts: axxia: Add reset controller
  power: reset: Add Axxia system reset driver
  ARM: axxia: Adding defconfig for AXM55xx
  ...

5 files changed, 100 insertions, 6 deletions

diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
index 58c2b844e0a3..573e0db1d0f0 100644
--- a/arch/arm/mach-zynq/Kconfig
+++ b/arch/arm/mach-zynq/Kconfig
@@ -1,14 +1,16 @@
 config ARCH_ZYNQ
 	bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7
-	select ARM_AMBA
-	select ARM_GIC
 	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_OPP
+	select ARCH_SUPPORTS_BIG_ENDIAN
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_GLOBAL_TIMER if !CPU_FREQ
+	select CADENCE_TTC_TIMER
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select ICST
-	select CADENCE_TTC_TIMER
-	select ARM_GLOBAL_TIMER if !CPU_FREQ
 	select MFD_SYSCON
+	select SOC_BUS
 	help
 	  Support for Xilinx Zynq ARM Cortex A9 Platform
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index 6fcc584c1a11..edbd9d83f407 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -29,6 +29,8 @@
 #include <linux/memblock.h>
 #include <linux/irqchip.h>
 #include <linux/irqchip/arm-gic.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -37,10 +39,15 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/smp_scu.h>
+#include <asm/system_info.h>
 #include <asm/hardware/cache-l2x0.h>
 
 #include "common.h"
 
+#define ZYNQ_DEVCFG_MCTRL		0x80
+#define ZYNQ_DEVCFG_PS_VERSION_SHIFT	28
+#define ZYNQ_DEVCFG_PS_VERSION_MASK	0xF
+
 void __iomem *zynq_scu_base;
 
 /**
@@ -60,19 +67,81 @@ static struct platform_device zynq_cpuidle_device = {
 };
 
 /**
+ * zynq_get_revision - Get Zynq silicon revision
+ *
+ * Return: Silicon version or -1 otherwise
+ */
+static int __init zynq_get_revision(void)
+{
+	struct device_node *np;
+	void __iomem *zynq_devcfg_base;
+	u32 revision;
+
+	np = of_find_compatible_node(NULL, NULL, "xlnx,zynq-devcfg-1.0");
+	if (!np) {
+		pr_err("%s: no devcfg node found\n", __func__);
+		return -1;
+	}
+
+	zynq_devcfg_base = of_iomap(np, 0);
+	if (!zynq_devcfg_base) {
+		pr_err("%s: Unable to map I/O memory\n", __func__);
+		return -1;
+	}
+
+	revision = readl(zynq_devcfg_base + ZYNQ_DEVCFG_MCTRL);
+	revision >>= ZYNQ_DEVCFG_PS_VERSION_SHIFT;
+	revision &= ZYNQ_DEVCFG_PS_VERSION_MASK;
+
+	iounmap(zynq_devcfg_base);
+
+	return revision;
+}
+
+/**
  * zynq_init_machine - System specific initialization, intended to be
  *		       called from board specific initialization.
  */
 static void __init zynq_init_machine(void)
 {
 	struct platform_device_info devinfo = { .name = "cpufreq-cpu0", };
+	struct soc_device_attribute *soc_dev_attr;
+	struct soc_device *soc_dev;
+	struct device *parent = NULL;
 
 	/*
 	 * 64KB way size, 8-way associativity, parity disabled
 	 */
 	l2x0_of_init(0x02060000, 0xF0F0FFFF);
 
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+	if (!soc_dev_attr)
+		goto out;
+
+	system_rev = zynq_get_revision();
+
+	soc_dev_attr->family = kasprintf(GFP_KERNEL, "Xilinx Zynq");
+	soc_dev_attr->revision = kasprintf(GFP_KERNEL, "0x%x", system_rev);
+	soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "0x%x",
+					 zynq_slcr_get_device_id());
+
+	soc_dev = soc_device_register(soc_dev_attr);
+	if (IS_ERR(soc_dev)) {
+		kfree(soc_dev_attr->family);
+		kfree(soc_dev_attr->revision);
+		kfree(soc_dev_attr->soc_id);
+		kfree(soc_dev_attr);
+		goto out;
+	}
+
+	parent = soc_device_to_device(soc_dev);
+
+out:
+	/*
+	 * Finished with the static registrations now; fill in the missing
+	 * devices
+	 */
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
 
 	platform_device_register(&zynq_cpuidle_device);
 	platform_device_register_full(&devinfo);
diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h
index b097844d3175..f652f0a884a6 100644
--- a/arch/arm/mach-zynq/common.h
+++ b/arch/arm/mach-zynq/common.h
@@ -24,6 +24,7 @@ extern int zynq_early_slcr_init(void);
 extern void zynq_slcr_system_reset(void);
 extern void zynq_slcr_cpu_stop(int cpu);
 extern void zynq_slcr_cpu_start(int cpu);
+extern u32 zynq_slcr_get_device_id(void);
 
 #ifdef CONFIG_SMP
 extern void secondary_startup(void);
diff --git a/arch/arm/mach-zynq/headsmp.S b/arch/arm/mach-zynq/headsmp.S
index 57a32869f0aa..dd8c071941e7 100644
--- a/arch/arm/mach-zynq/headsmp.S
+++ b/arch/arm/mach-zynq/headsmp.S
@@ -8,9 +8,12 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <asm/assembler.h>
 
 ENTRY(zynq_secondary_trampoline)
-	ldr	r0, [pc]
+ARM_BE8(setend	be)				@ ensure we are in BE8 mode
+	ldr	r0, zynq_secondary_trampoline_jump
+ARM_BE8(rev	r0, r0)
 	bx	r0
 .globl zynq_secondary_trampoline_jump
 zynq_secondary_trampoline_jump:
diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c
index a37d49a6e657..c43a2d16e223 100644
--- a/arch/arm/mach-zynq/slcr.c
+++ b/arch/arm/mach-zynq/slcr.c
@@ -26,10 +26,13 @@
 #define SLCR_PS_RST_CTRL_OFFSET		0x200 /* PS Software Reset Control */
 #define SLCR_A9_CPU_RST_CTRL_OFFSET	0x244 /* CPU Software Reset Control */
 #define SLCR_REBOOT_STATUS_OFFSET	0x258 /* PS Reboot Status */
+#define SLCR_PSS_IDCODE			0x530 /* PS IDCODE */
 
 #define SLCR_UNLOCK_MAGIC		0xDF0D
 #define SLCR_A9_CPU_CLKSTOP		0x10
 #define SLCR_A9_CPU_RST			0x1
+#define SLCR_PSS_IDCODE_DEVICE_SHIFT	12
+#define SLCR_PSS_IDCODE_DEVICE_MASK	0x1F
 
 static void __iomem *zynq_slcr_base;
 static struct regmap *zynq_slcr_regmap;
@@ -83,6 +86,22 @@ static inline int zynq_slcr_unlock(void)
 }
 
 /**
+ * zynq_slcr_get_device_id - Read device code id
+ *
+ * Return:	Device code id
+ */
+u32 zynq_slcr_get_device_id(void)
+{
+	u32 val;
+
+	zynq_slcr_read(&val, SLCR_PSS_IDCODE);
+	val >>= SLCR_PSS_IDCODE_DEVICE_SHIFT;
+	val &= SLCR_PSS_IDCODE_DEVICE_MASK;
+
+	return val;
+}
+
+/**
  * zynq_slcr_system_reset - Reset the entire system.
  */
 void zynq_slcr_system_reset(void)